summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-05-04mb/purism/librem_skl: Convert to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I3dac62a649e12ea2498d3ecafe03fd0d62af5f2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMeMatt DeVillier
Per the schematics, SRCCLKREQ2# is used for the NVMe and should be enabled. Enable CLKREQ for PCIe RP9, and adjust comments to indicate correct value used per schematic. Test: build/boot Librem 15v3 with NVMe drive, verify drive identified properly and no errors in boot log. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I159cb7ce1f5195d95c0229490c3bbde26edbd375 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04mb/purism/librem_skl: drop SataSpeedLimit restrictionMatt DeVillier
SataSpeedLimit was set to 3Gbps to work around issues which are now known to be the result of incorrect FSP behavior. Since SataPwrOptEnable is now set at the SoC level and ensures the SIR registers are correctly programmed, we can re-enable 6Gbps operation without errors. Test: build/boot Librem 13v2 with both m.2 and 2.5" SATA drives, check dmesg for errors. Change-Id: I3565dc063724ad288ef92361942fcdc14daac17e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40909 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04soc/intel/skl: always enable SataPwrOptEnableMichael Niewöhner
For unknown reasons FSP skips a whole bunch of SIR (SATA Initialization Registers) when SataPwrOptEnable=0, which currently is the default in coreboot and FSP. Even if FSP's default was 1, coreboot would reset it. This can lead to all sorts of problems and errors, for example: - links get lost - only 1.5 or 3 Gbps instead of 6 Gbps - "unaligned write" errors in Linux - ... At least on two boards (supermicro/x11-lga1151-series/x11ssm-f and purism/librem13v2) SATA is not working correctly and showing such symptoms. To let FSP correctly initialize the SATA controller, enable the option SataPwrOptEnable statically. There is no valid reason to disable it, which might break SATA, anyway. Currently, there are no reported issues on CML and CNL, so a change there could not be tested reliably. SKL/KBL was tested successfully without any noticable downsides. Thus, only SKL gets changed for now. Change-Id: I8531ba9743453a3118b389565517eb769b5e7929 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40877 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04soc/intel/cannonlake: Add DisableHeciRetry to configChristian Walter
Add DisableHeciRetry to the chip config and parse it in romstage. Change-Id: I460b51834c7de42e68fe3d54c66acd1022a3bdaf Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-05-04mb/up/squared: Fix eMMC speed for UP2 with EDK2Patrik Tesarik
Since commit 402fe20e (mb/up/squared: Add mainboard) the UP2's eMMC maximum host speed was reduced to DDR50, because HS200 showed I/O errors in the host kernel. We found out that with EDK2 master the correct Host Speed could not be set properly during EDK2 platform init. Therefore eMMC would not show up for boot device selection. This commit sets the eMMC MaxHostSpeed to the designed max value of the used eMMC on the UP2 board and furthermore drops the override from the ramstage.c. It's already set in the devicetree.cb. Though CRC errors are still visible in EDK II debug logs, no other negative effects have been observed. Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de> Change-Id: I8d53204d8a776efd560fbdea918f83e180813179 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04soc/intel/common/block/cse: Add boot partition related APIsSridhar Siricilla
In CSE Firmware Custom SKU, CSE region is logically divided into 2 boot partitions. These boot partitions are represented by BP1(RO), BP2(RW). With CSE Firmware Custom SKU, CSE can boot from either RO(BP1) or RW(BP2). The CSE Firmware Custom SKU layout appears as below: ------------- -------------------- --------------------- |CSE REGION | => | RO | RW | DATA | => | BP1 | BP2 | DATA | ------------- -------------------- --------------------- In order to support CSE FW update to RW region, below APIs help coreboot to get info about the boot partitions, and allows coreboot to set CSE to boot from required boot partition (either RO(BP1) or RW(BP2)). GET_BOOT_PARTITION_INFO - Provides info on available partitions in the CSE region. The API provides info on boot partitions like start/end offsets of a partition within CSE region, and their version and partition status. SET_BOOT_PARTITION_INFO - Sets CSE's next boot partition to boot from. With the HECI API, firmware can notify CSE to boot from RO(BP1) or RW(BP2) on next boot. As system having CSE Firmware Custom SKU, boots from RO(BP1) after G3, so coreboot sets CSE to boot from RW(BP2) in normal mode and further, coreboot ensure CSE to boot from whichever is selected boot partition if system is in recovery mode. BUG=b:145809764 TEST=Verified on hatch Change-Id: Iaa62409c0616d5913d21374a8a6804f82258eb4f Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-04security/vboot: Limit vboot verification code access to only verstageSridhar Siricilla
Make vboot verification code accessible in only verstage. Vboot verification code in vboot_logic.c is being used in verstage. Due to support function vboot_save_data(), so core functionality in vboot_logic.c is made available in romstage. The patch decouples the support function frm vboot_logic.c to limit itself to verstage. BUG=b:155544643 TEST=Verified on hatch Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Id1ede45c4dffe90afcef210eabaa657cf92a9335 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2020-05-04mb/google/dedede: Read DRAM part number from CBIMarco Chen
The index of MEM_STRAPS will be migrated from per DRAM part number to per DRAM characteristic therefore one index mapped to a single SPD binary can represent to multiple DRAM part numbers as long as their characteristic is the same for DRAM controller to support. In this case, the real DRAM part number would be provisioned in the CBI instead of SPD in the factory flow. As a result, we need to extract DRAM part number from CBI. BUG=b:152019429 BRANCH=None TEST=1. provision dram_part_num field of CBI 2. check DRAM part number is correct in SMBIOS for memory device Change-Id: I40780a35e04efb279591e9db179cb86b5e907c0d Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-04mb/**/dsdt.asl: Drop unused BRIGHTNESS_{UP,DOWN}Angel Pons
It is only used with the Lenovo-specific H8 EC code. Change-Id: If3b209a9ab82a07ce7b4450d8a0b62a1ca86a95c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-04treewide: Drop ACPI_VIDEO_DEVICE macroAngel Pons
It was always defined to the same value, and only used twice. Change-Id: I2736eb7ea2cf15475f7bb99d7d12450730eb8be0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40864 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04mb/**/dsdt.asl: Drop unused ACPI_VIDEO_DEVICEAngel Pons
It is only used with the Lenovo-specific H8 EC code. Change-Id: I596d4d19277555894ab728e32a44e34a5a21e21d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-04nb/intel/i945/memmap: Convert to 96 characters line lengthElyes HAOUAS
Also remove an extra star in comment. Change-Id: I2ef938573e75022dcb31c935dde7d3055e7a53f0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40802 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04asus/p2b: Enable IDE and UDMA for all variantsKeith Hui
There's no reason not to. Change-Id: I12c9e0f66c437d8add5c4096fd2a5e747d082799 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-04nb/intel/i440bx: Ready raminit for S3 resume pathKeith Hui
Change-Id: I77e95850af82a5684ba10841260db021f5de1e8b Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04nb/intel/i440bx: Use SPDX for remaining filesKeith Hui
Change-Id: I0d28f1fc835fc05b4fc3ab891e9e6e340848aa49 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04nb/intel/i440bx: Drop northbridge.hKeith Hui
It declares a function that was either never or no longer implemented. Change-Id: I714d39374519bff1afb94870d0e84f57db619a1f Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04nb/intel/i440bx: Resolve a SMP-raminit TODOKeith Hui
Change-Id: I0087294bccee079368c93ba8986873a5e65593b0 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04sb/intel/i82371eb: Move wakeup code to romstageKeith Hui
This code is needed in romstage, not ramstage. Change-Id: Ic38c3c50fb135fba582864a242348ec29cec2991 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02soc/amd/picasso: Select CHROMEOS_RAMOOPS_DYNAMICFurquan Shaikh
For boards that select CHROMEOS, select CHROMEOS_RAMOOPS_DYNAMIC by default. BUG=b:155345589 Change-Id: Id215f3a2c8d1e9e713a628283af9586a1f117ef4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40949 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Update sata files to be more aligned with rest of acpi filesFurquan Shaikh
This change moves sata.h to include/acpi/acpi_sata.h to align with the rest of the acpi header files in include/acpi. BUG=b:155428745 Change-Id: I3f97e5c12535a331d7347c0ecad00b07b5f13f37 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02acpi: Remove acpi_ from filenamesFurquan Shaikh
This change drops acpi_ prefix from filenames under src/acpi/. BUG=b:155428745 Change-Id: Iadda2b848701367e51f4f74706154f7e36a87df6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Reorganize ACPI configsFurquan Shaikh
In order to the Kconfigs in the same directory where the corresponding code lives, this change moves ACPI_BERT to arch/x86/Kconfig and following configs to acpi/Kconfig: ACPI_CPU_STRING ACPI_HAVE_PCAT_8259 ACPI_NO_PCAT_8259 HAVE_ACPI_TABLES BUG=b:155428745 Change-Id: I289565f38e46bd106ff89685aaf8f57e53d9827a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40932 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Make header #ifdefs consistentFurquan Shaikh
Now that all ACPI header files are moved to src/include/acpi, this change updates the #ifdef to __ACPI_${FILENAME}__. BUG=b:155428745 Change-Id: Id24ee35bac318278871a26f98be7092604de01c0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Move ACPI table support out of arch/x86 (5/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 5/5 which moves the addition of ACPI table related files from arch/x86/Makefile.inc to acpi/Makefile.inc. BUG=b:155428745 Change-Id: I8143fd37357aeb0561516450adddc6714d539ada Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (4/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 4/5 which gets rid of the placeholder header files that were added to temporarily include acpi/ header files from arch/header files. BUG=b:155428745 Change-Id: If6e8580c3c6433f9239e06a1dc7ba661b3f597e5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02mb/asus/p8h61-m_pro: Disable SVID LDNAngel Pons
The SVID functionality is not used on this mainboard. Turn it off. Change-Id: Iea891975b32d24f54edec9d8c36391ec60a37d0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-02mb/asus/p8h61-m_pro: Disable SB-TSI base addressAngel Pons
SB-TSI is specific to AMD platforms, but this is an Intel board. Change-Id: I5eb7e3bc920103279dfca3a9ec14a41666404993 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40738 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02mb/asus/p8h61-m_pro: Fix function of pin 70Angel Pons
The board uses the pin for Deep S5, but the code was setting 3VSBSW. Change-Id: I81c865358002e6af500658efea851ab8c8202950 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Move ACPI table support out of arch/x86 (2/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 2/5 which moves the contents of arch/x86/include/arch/acpi*.h files into include/acpi/acpi*.h and updates the arch header files to include acpi header files. These are just temporary placeholders and will be removed later in the series. BUG=b:155428745 Change-Id: I9acb787770b7f09fd2cbd99cb8d0a6499b9c64b3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-02acpi: Move ACPI table support out of arch/x86 (1/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 1/5 which moves .c files from arch/x86 to acpi/. The only acpi files that are still retained under arch/x86 are: a. acpi_s3.c: This doesn't really deal with ACPI tables. Also, there are some assumptions in there about SMM which will have to be resolved if this file needs to be moved to common code. b. acpi_bert_storage.c/bert_storage.h: This file is currently written specifically with x86 in mind. So, not moving the file for now. Motivation for this change: Not all stages on Picasso SoC are targeted for the same architecture. For example, verstage (if runs before bootblock) will be targeted for non-x86. This makes it difficult to add device tree to verstage which would be required to get to SoC configs from the tree. This is because the device tree on x86 platforms currently contains a lot of devices that require ACPI related enums and structs (like acpi_gpio, acpi_pld, acpi_dp and so on). Hence, this change removes all ACPI table support out of arch/x86. BUG=b:155428745 Change-Id: Icc6b793c52c86483a8c52e0555619e36869a869e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-02mb/asus/p2b*: Get rid of power button deviceKeith Hui
These boards have the same issue as [27272]: Currently, two power buttons are exposed in ACPI, and detected by the operating system. > As per the ACPI specification, there are two types of power button > devices: > 1. Fixed hardware power button > 2. Generic hardware power button > > Fixed hardware power button is added by the OSPM if POWER_BUTTON flag > is not set in FADT by the BIOS. This device has its programming model > in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this > power button device by default if the power button FADT flag is not > set. > > On the other hand, generic hardware power button can be used by > platforms if fixed register space cannot be used for the power button > device. In order to support this, power button device object with HID > PNP0C0C is expected to be added to ACPI tables. Additionally, > POWER_BUTTON flag should be set to indicate the presence of control > method for power button. > > [i440BX] mainboards implemented the generic hardware power button in > a broken manner i.e. power button object with HID PNP0C0C is added to > ACPI however none of the boards set POWER_BUTTON flag in FADT. This > results in Linux kernel adding both fixed hardware power button as > well as generic hardware power button to the list of devices present > on the system. Though this is mostly harmless, it is logically > incorrect and can confuse any userspace utilities scanning the ACPI > devices. Hardware tests on the P2B-LS shows the generic hardware power button is not working anyway - with FADT power button flag set, the board could not power off with the button. This change removes the generic hardware power button from all P2B mainboards and relies completely on the fixed hardware power button. TEST=Booted on P2B-LS, Linux detects only fixed hardware power button, button still powers off. [27272]: https://review.coreboot.org/27272 Change-Id: I0f5b7aaf32366360de3cce58cd742651a2bb46ba Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02mb/google/reef: Add and use VBTMatt DeVillier
Add VBT file, and override use via Kconfig since all Reef variants use the same VBT file. VBT extracted from firmware in ChromeOS recovery image. Test: built/boot google/reef w/FSP display init Change-Id: I31156ec7371c0443719fdd9ddac6ed4960c83767 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02mb/purism/librem_bdw: Convert to use override devicetreeMatt DeVillier
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I07fb5a09e578bf299081b26e010317385a6c5f7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02mb/purism/librem_bdw: Clean up 15v2 devicetreeMatt DeVillier
The Librem 15v2 only uses SATA ports 0/1, so the DTLE settings for ports 2/3 have no consequence. Drop them to make overridetree conversion cleaner. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I4145feecb389be90f317249426e58752c03aef76 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40914 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02mainboard/google/kahlee: Add hook for early wlan rst gpio initKevin Chiu
Base on the grunt board schematic, gpio70 is an alternative way for wlan rst. Add hook for variants to override default state. BUG=b:154357210,b:154848243 BRANCH=master TEST=emerge-grunt coreboot Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Change-Id: Ic3f1c016357dd5090e6adedf96e7593abff29a0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-05-02payloads/seabios: Add Hardware IRQ KconfigMatt DeVillier
Certain boards require SeaBIOS' HARDWARE_IRQ option to be deselected in order for the platform to boot. Add a Kconfig to allow selection of HARDWARE_IRQ enablement, and write to SeaBIOS' .config file in cases where it needs to be disabled. Deselect the option for google/rambi variants so they boot with boards defaults. Test: build/boot google/clapper, verify board boots vs hanging at boot menu prompt. Change-Id: I23e9b30d2d1042c86bd10f134d6fe361edaf8cb2 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02intel/stm: Drop now unneeded `num_cpus` paramEugene D Myers
Suggested by Nico Huber in CB:38766 Change-Id: Ib8a340f17a12951bc6bc67e3093046575e7b0e46 Signed-off-by: Eugene D Myers <cedarhouse@comcast.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02intel/stm: Place resource list right below MSEGEugene D Myers
Suggested by Nico Huber in CB:38765. This placement makes the address calculation simpler and makes its location indepedent of the number of CPUs. As part of the change in the BIOS resource list address calculation, the `size` variable was factored out of the conditional in line 361, thus eliminating the else. Change-Id: I9ee2747474df02b0306530048bdec75e95413b5d Signed-off-by: Eugene D Myers <cedarhouse@comcast.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40437 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02mb/google/reef: add default non-ChromeOS FMAPMatt DeVillier
Add a FMAP which supports SMMSTORE and non-ChromeOS payloads, since Apollo Lake-based devices like Reef cannot use an automatically-generated FMAP due to strict layout requirements. Change-Id: If570f92f4f81c0e29777c87756fc5e45af549064 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02mb/supermicro/x11: drop DeepSx config from devicetreeMichael Niewöhner
Drop the DeepSx config as it's unsupported and disabled for the boards. Change-Id: I91cd15b26a41f376561630cf45ffa192745eae84 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-02nb/intel/i440bx: Clean up register_values tableKeith Hui
The table of initial i440BX register values has a bitmask that allows preserving certain bits as they are programmed. This feature has been unused since day one and probably will never be used. So drop it. Drop DRB, RPS, PGPOL registers from the table as they will be programmed during RAM init. These two reductions combined saved ~104 bytes. Drop unneeded SDRAMC "+0". Slightly compact a comment block. TEST=Boot tested on asus/p2b-ls, i440bx config did not change Change-Id: I020f616455bb671fe284993a488beb6386a03d0d Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-05-02arch/x86: Change power_res_dev_states[] to be static const * constFurquan Shaikh
This change makes power_res_dev_states[] to be static const * const as complained by Jenkins. BUG=b:155428745 Change-Id: Ice2fff6ab3bcd72a059bc905b7462a681f2e6aaf Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-02cpu: Add a helper function cpu_get_lapic_addrFurquan Shaikh
This change adds a helper function cpu_get_lapic_addr() that returns LOCAL_APIC_ADDR for x86. It also adds a weak default implementation which returns 0 if platform does not support LAPIC. This is being done in preparation to move all ACPI table support in coreboot out of arch/x86. BUG=b:155428745 Change-Id: I4d9c50ee46804164712aaa22be1b434f800871ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-05-02src/acpi: Drop Kconfig option ACPI_SATA_GENERATORFurquan Shaikh
ACPI_SATA_GENERATOR is currently used to include sata.c in ramstage. However, there is no need to guard this inclusion using a separate Kconfig. All other files that deal with ACPI tables are included based on the state of HAVE_ACPI_TABLES. This change includes sata.c in ramstage if HAVE_ACPI_TABLES is selected. If the ACPI function isn't used, linker will optimize it out. BUG=b:155428745 Change-Id: I9a319cfe7c3f973b15ccbd0f13bd1ed07571a398 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-01soc/amd/picasso: add sd/emmc0 configuration to chip.hAaron Durbin
In order to isolate mainboard code from direct FSPS manipulation allow sd/emmc0 configuration to be supplied by devicetree.cb. BUG=b:153502861 Change-Id: I2569ccccd638faaf2c9ac68fe582ecb9fa967d9f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146439 Commit-Queue: Aaron Durbin <adurbin@google.com> Tested-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01soc/amd/picasso: Add FSP support for including AGESAMarshall Dawson
AMD has rewritten AGESA (now at v9) for direct inclusion into UEFI build environments. Therefore, unlike the previous Arch2008 (a.k.a. v5), it can't be built without additional source, e.g. by combining with EDK II, and it has no entry points for easily building it into a legacy BIOS. AGESA in coreboot now relies on the FSP 2.0 framework published by Intel and uses the existing fsp2_0 driver. * Add fsp_memory_init() to romstage.c. Although Picasso comes out of reset with DRAM alive, this call is added to maximize compatibility and facilitate internal development. Future work may look at removing it. AGESA reports the memory map to coreboot via HOBs returned from fsp_memory_init(). * AGESA currently sets up MTRRs, as in most older generations. Take ownership back immediately before running ramstage. * Remove cbmem initialization, as the FSP driver handles this. * Add chipset_handle_reset() for compatibility. * Top of memory is determined by the FSP driver checking the HOBs passed from AGESA. Note that relying on the TOM register happens to be misleading when UMA is below 4GB. BUG=b:147042464 TEST=Boot trembyle to payload Change-Id: Iecb3a3f2599a8ccbc168b1d26a0271f51b71dcf0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34423 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01src/soc/amd/picasso: Add methods to save and restore MTRRsRaul E Rangel
FSP AGESA overrides the MTRRs that coreboot set up. Until this is fixed we need to save and restore the MTRRs to undo what AGESA did. Once AGESA is fixed, we can delete these files. BUG=b:155426691, b:147042464 TEST=Boot trembyle and see MTRRs being modified Saving Variable MTRR 0: Base: 0x00000000 0xff000005, Mask: 0x0000ffff 0xff000800 Saving Variable MTRR 1: Base: 0x00000000 0x08070006, Mask: 0x0000ffff 0xffff0800 Saving Variable MTRR 2: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 3: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 4: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 5: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 6: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 7: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Fixed MTRR 0: 0x00000000 0x00000000 Saving Fixed MTRR 1: 0x00000000 0x00000000 Saving Fixed MTRR 2: 0x00000000 0x00000000 Saving Fixed MTRR 3: 0x00000000 0x00000000 Saving Fixed MTRR 4: 0x00000000 0x00000000 Saving Fixed MTRR 5: 0x00000000 0x00000000 Saving Fixed MTRR 6: 0x00000000 0x00000000 Saving Fixed MTRR 7: 0x00000000 0x00000000 Saving Fixed MTRR 8: 0x00000000 0x00000000 Saving Fixed MTRR 9: 0x00000000 0x00000000 Saving Fixed MTRR 10: 0x00000000 0x00000000 Saving Default Type MTRR: 0x00000000 0x00000800 Saving SYS_CFG: 0x00000000 0x00000800 ... MSR 0x200 was modified: 0x00000000 0x00000006 MSR 0x201 was modified: 0x0000ffff 0x80000800 MSR 0x202 was modified: 0x00000000 0x80000006 MSR 0x203 was modified: 0x0000ffff 0xc0000800 MSR 0x204 was modified: 0x00000000 0xc0000006 MSR 0x205 was modified: 0x0000ffff 0xf0000800 MSR 0x250 was modified: 0x06060606 0x06060606 MSR 0x258 was modified: 0x06060606 0x06060606 SYS_CFG was modified: 0x00000000 0x00740000 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6048b25bd8a32904031ca23953f9726754b5a294 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40922 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/xeon_sp/cpx: Implement hide/unhide P2SB traditional danceAndrey Petrov
Perform the P2SB hide/unhide trick. This is needed so that BAR0 (0xfd000000) is not reclaimed by resource allocator, since it can not deal with a device that does not exist (hidden). Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I5db0ae4e31d72ba86efba5728b2afc68d3180d5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/40921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-05-01soc/intel/xeon_sp/cpx: Enable common P2SBAndrey Petrov
Use common P2SB driver. This is needed to address a problem when enumerator does not see p2sb device (since it is hidden) but it is active and BAR is decoded. Change-Id: I9cb821a5684f15f1e1486872bf806a6ee3d0676f Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40920 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/xeon_sp: Add C620 p2sb.hAndrey Petrov
Add p2sb.h that is shared by all currently supported Xeon SP CPUs. Change-Id: Idcbff7ad587cb116897a953c079fb0a8b86cc2ed Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40919 Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/intel/cedarisland_crb: Enable P2SB deviceAndrey Petrov
Enable P2SB in static device tree so that hide/unhide trick works. Change-Id: I7dc20b001605b715155d333a07580e21a5f24136 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01mb/intel/cedarisland_crb: Populate 2-socket parameters for FSP-MAndrey Petrov
These parameters were found to work fine for 2-socket configuration, for FSP based on tag 16.D.21. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I466a7f2951ef307036ddaed0be0aacf98dd2710f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01md/tiogapass: move all *.h to dir and make them globalMaxim Polyakov
It is necessary to rename the file gpio.h so that there are no conflict with another file (src/include/gpio.h) Change-Id: I4e3ef5882d6cb0ddbcb8357b54106ff2f47e4c51 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40733 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01xeon_sp, ocp/tiogapass: remove unused FSP-style GPIO defsMaxim Polyakov
Change-Id: I8599dca99c1f34e3937c5b77b3505815ce625b46 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01mb/ocp/tiogapass: fix advanced _PAD_CFG_STRUCT macros in configMaxim Polyakov
If the current pad configuration can not be defined using standard macros from the gpio_defs.h [1], then the intelp2m utility generates "advanced" _PAD_CFG_STRUCT() macros. However, often this configuration in the vendor’s firmware is erroneous. Change the extended macros to standard ones taking into account the information based on the schematic diagram and the previous GPIO configuration for FSP-M [2]. [1] src/soc/intel/common/block/include/intelblocks/gpio_defs.h [2] src/mainboard/ocp/tiogapass/skxsp_tp_gpio.h Change-Id: I56e45b1df77acbdd67e6325c3745a7ad137f8805 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-05-01mb/ocp/tiogapass: rework GPIOs configuration using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 registers values from the inteltool dump, is more understandable and makes the code much cleaner. The gpio.h file with PAD_CFG macros was automatically generated using the util/intelp2m [1] utility: ./intelp2m -p lbg -file tiogapass/vendorbios/inteltool_gpio.log According to the documentation [2], the Host Software Pad Ownership register only affects the pads that are configured as input (GPI). The intelp2m utility takes this into account when converting macros and ignores bits from this register for the corresponding pads. [1] https://review.coreboot.org/c/coreboot/+/35643 [2] Intel Document Number: 549921 Change-Id: I21e98721e58b00be9196927837daa2b5d2560822 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40731 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/tiogapass: use common driver to configure GPIOMaxim Polyakov
According to changes in the soc/xeon_sp code [1,2], server motherboards with Lewisburg PCH can use the soc/intel/common/gpio driver to configure GPIO controller. This patch adds pads configuration map, which has the format required by the GPIO driver. The data for this was taken from the inteltool register dump with AMI firmware. The gpio.h file with pad configuration was generated automatically using the util/intelp2m [3]: ./intelp2m -raw -p lbg -file tiogapass/vendorbios/inteltool_gpio.log [1] https: //review.coreboot.org/c/coreboot/+/39425 [2] https: //review.coreboot.org/c/coreboot/+/39428 [3] https: //review.coreboot.org/c/coreboot/+/35643 Change-Id: I818d040fa33f3e7b94b73c9bbbafca5df424616d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39427 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/ocp/sonorapass: Populate FSP-M parametersAndrey Petrov
Since CPX FSP headers are not released yet, populate certain settings with hard-coded offsets. Provided values are probably not correct and I do not understand what they mean and there is no documentation available yet. However they were found to work to a certain degree. TEST=tested on OCP Sonora Pass EVT Change-Id: I0f78cde69cb8a49a388a412b97bf8713e5b380ea Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40554 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/baytrail: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I9b15b5458bb8140fa9bb6b0ffb6b9c78e8d8a93b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01mb/ocp/sonorapass: Add Sonora PassRyback Hung
Just a minimal set of board files needed to get it to boot in 1 CPU mode. Signed-off-by: Ryback Hung <ryback.hung%quantatw.com@gtempaccount.com> Change-Id: Ia7b45c78b38d091bd9535899b681746e13efb4fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/40469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-05-01soc/intel/baytrail: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I353daf35c843521b089ff8411a9ba8c801605ff9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/intel/braswell: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: Ie213b8c08e2d2b33a1dc1fda632163160d1cd70e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/intel/cannonlake: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: If7e2c84c39039e0dc6811f247390f856fc634b33 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/intel/common: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I09cc69a20dc67c0f48b35bfd2afeaba9e2ee5064 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/intel/broadwell: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I0fd1a758d8838b3eea5640b41eee6a6893360aa3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01cpu/x86/mtrr/earlymtrr: Validate MTRR argumentsRaul E Rangel
The AMD64 Architecture Programmer's Manual, Volume 2: Systems Programming says the following about variable MTRRs: Variable Range Size and Alignment. The size and alignment of variable memory-ranges (MTRRs) and I/O ranges (IORRs) are restricted as follows: * The boundary on which a variable range is aligned must be equal to the range size. For example, a memory range of 16 Mbytes must be aligned on a 16-Mbyte boundary (i.e., naturally aligned). * The range size must be a power of 2 (2^n , 52 > n > 11), with a minimum allowable size of 4 Kbytes. For example, 4 Mbytes and 8 Mbytes are allowable memory range sizes, but 6 Mbytes is not allowable. Print out errors if these conditions are violated. I didn't assert since `set_var_mtrr` can be used in boot block before the serial console is enabled. BUG=b:147042464 TEST=Boot trembyle and see MTRR errors: MTRR Error: base 0xcc800000 must be aligned to size 0x1000000 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8b8c734c7599bd89cf9f212ed43c2dd5b2c8ba7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40762 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01sb/intel/i82801gx: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I11b8743234cb1292db8c930edecf8fb5c47d63fd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-01mb/google/dedede: Fix crossystem wpsw_cur errorSubrata Banik
Add GPIO_PCH_WP (GPP_C11) to associate GPP_PCH_WP with community zero. TEST=Build coreboot, flash, boot to and log into kernel, execute "wp enable" in console, execute "crossystem" at kernel prompt and verify that "wpsw_cur" shows as being "1", Execute "wp disable" in console, execute "crossystem" at kernel prompt and verify "wpsw_cur" is 0. Change-Id: Ie4ae1365a7611b8be3e795798c171e3f7ea9e417 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40744 Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/amd/picasso: initialize i2c controllers in SoC flowAaron Durbin
BUG=b:153642124 TEST=Saw I2C communication Change-Id: I31f8b97d1ff7b687d7e078d5b594d1ad73c815e7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2145457 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01soc/amd/picasso/bootblock: Remove duplicate sb_reset_i2c_slavesRaul E Rangel
sb_reset_i2c_slaves is called in fch_pre_init. BUG=b:153675916 TEST=Builds on trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I157e473984257d633ceb3ef9df45c71a31c5c00b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-01soc/amd/picasso/bootblock/bootblock: Remove duplicate i2c initRaul E Rangel
fch_early_init already calls i2c_soc_early_init(). BUG=b:153675916 TEST=Boot trembyle and only see 1 i2c initialization message Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I689616fb617904df1781be3abe9d1dc580608173 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-01soc/amd/picasso: Allow mainboard to provide pci ddi descriptorsAaron Durbin
Mainboards must provide their DDI descriptors. BUG=b:153502861 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146443 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146439 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146438 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2145453 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2145454 Change-Id: Ib3f115711e74d0e6eb5b063b3dccb36b265779af Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40875 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01ec/google/chromeec: Fix incorrect diag messageVictor Ding
The expected error code observed in clear_pending_events() should be EC_RES_UNAVAILABLE(9), not EC_RES_INVALID_COMMAND(1). BUG=b:153896701 Change-Id: I609490ceef675267760d34b5e9775211da93347c Signed-off-by: Victor Ding <victording@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40900 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/deltaur: Add BT reset gpioEric Lai
Harrison Peak (HrP) 9560 module needs a reset pin for BT power sequence. BUG=b:155248677 TEST=Boot into OS and check BT is functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I55ed1b095ba53c414c44088f4a6e7720b970e2f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-01soc/intel/{jsl,tgl}: Rename PcdDebugInterfaceFlags macros for better ↵Subrata Banik
understanding BIT 1 -> DEBUG_INTERFACE_UART_8250IO BIT 4 -> DEBUG_INTERFACE_LPSS_SERIAL_IO Change-Id: I566b9dc82b2289af42e58705ebeee51179886f1f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-01mb/google/deltaur: Update USB/WWAN configIvy Jian
Update USB3 ports configuration as schematics design. BUG=b:155026295 TEST=Boot into OS and check WWAN device detected by lsusb. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Icb938e5a9c05fcc9772219b081a6f05334261baf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40818 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01acpi_device: Make integer array input variable constDuncan Laurie
An array of 64bit integers is passed to acpi_dp_add_integer_array() but it is not const so can't take a const array without a compiler error. The function does not modify the array so it can be made const without breaking anything and allowing a const array to be passed in the future. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I98ecdaef5ddfa2026390e2812f5ea841ee51f073 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40882 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01arch/x86/acpi: Add define for generic container HIDDuncan Laurie
The generic container HID is defined in ACPI specification as PNP0A05. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I3632e77533a47f22b92259b469b03e63f51687e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01arch/x86/acpi_device: Allow empty child referencesDuncan Laurie
Currently if a child table is created and added to a property list without adding any properties to that child it will generate an empty package. For example: struct acpi_dp *dsd = acpi_dp_new_table("_DSD"); struct acpi_dp *prop = acpi_dp_new_table("PROP"); acpi_dp_add_child(dsd, "dsd-prop", prop); acpi_dp_write(dsd); Results in an empty PROP package: Name (_DSD, Package (2) { ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b") Package (1) { Package (2) { "dsd-prop", "PROP" } } } Name (PROP, Package (0) { } Empty packages don't seem to be explicitly forbidden, but they don't serve a purpose with device properties. Instead, if packages without any properties or children are skipped then this empty package is not written and the added child property can refer to another property that is already defined. This allows creating property references to existing tables, which can save duplication and namespace collision issues with nested properties. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I9fee2ceb8a4496b90c7210533eee8c2b186cdfff Reviewed-on: https://review.coreboot.org/c/coreboot/+/40880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01soc/intel/jasperlake: fix args of dimm_info_fill() for dram_part_numMarco Chen
BUG=b:152019429 BRANCH=None TEST=1. provision dram_part_num field of CBI 2. modify mainboard - dedede to report DRAM part number from CBI 3. check DRAM part number is correct in SMBIOS for memory device Change-Id: I509d06a81bd005c5afe6e74a2da2ca408dee7b29 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mainboard/google/kahlee: move specific setting to variantKevin Chiu
Separate specific setting to variant from baseboard. baseboard/romstage.c in current release is only utilized by careena, we could remove it from the rest of variant build. BUG=b:154357210,b:154848243 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I658526e44aadc47bdc5538f506a1bfe2e5f20f63 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-05-01soc/intel/cannonlake/bootblock: Fix FSP CARPatrick Rudolph
Fix FSP CAR on platforms that have ROM_SIZE of 32MiB. CodeRegionSize must be smaller than or equal to 16MiB to not overlap with LAPIC or the CAR area at 0xfef00000. Tested on Intel CFL, the new code allows to boot using FSP-T. Change-Id: I4dfee230c3cc883fad0cb92977c8f5570e1a927c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01mb/google/octopus/variants/bobba: Disable XHCI LFPS power managementSheng-Liang Pan
LTE module is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ib8e5ae79e097debf0c75ead232ddbb2baced2a2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/40303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-05-01mb/google/volteer/malefor: Enable touch screenWilliam Wei
Enable Goodix touch screen and ensure it works properly. BUG=b:154191288 TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the Goodix touch screen function. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: I236ac56dd0a1817092151bae93e699115ba88e4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40598 Reviewed-by: Alex Levin <levinale@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01vc/eltan/security/verified_boot/vboot_check.c: Increase wb_buffer sizeFrans Hendriks
Running commit aee0baf0690681fae85d24e6887d6cbb9209de83 on Facebook fbg1701 results in an error: VB2:vb2_rsa_verify_digest() ERROR - vboot2 work buffer too small! ERROR: HASH table verification failed! The actual vboot structures require more space. Workbuffer size needs to be increased. We didn't determine the commit causing the issue because this change fixes the issue. BUG=N/A TEST=Build and boot Facebook fbg1701 Change-Id: I5caebc643eb493f4285c2f2fc164ff3a5d35e24e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-01soc/amd/common/block/graphics/graphics: Add missing const to fill_ssdtRaul E Rangel
BUG=none TEST=Made sure trembyle builds Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9df70fd5c41a9a68edc7be3c2e920c4dc94d5af9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40871 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/purism/librem_skl: Use ACPI backlight controlsBenjamin Doron
Enables ACPI backlight controls. Change-Id: Iccf50f427b7555ee1a3ef9cc11a89d532789ac54 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-05-01soc/amd/picasso: Enable cache in bootblockFelix Held
Unlike prior AMD devices, picasso cannot rely on the cache-as-RAM setup code to properly enable MTRRs. Add that capability to the bootblock_c_entry() function. In addition, enable an MTRR to cache (WP) the flash boot device and another for WB of the non-XIP bootblock running in DRAM. BUG=b:147042464 TEST=Boot trembyle to payload and make sure bootblock isn't abnormally slow. Change-Id: I5615ff60ca196e622a939b46276a4a0940076ebe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38691 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01security/vboot: Convert reboot-related errors to vboot2-styleYu-Ping Wu
Error codes are renamed as follows: VBERROR_SHUTDOWN_REQUESTED --> VB2_REQUEST_SHUTDOWN VBERROR_REBOOT_REQUIRED --> VB2_REQUEST_REBOOT VBERROR_EC_REBOOT_TO_SWITCH_RW --> VB2_REQUEST_REBOOT_EC_SWITCH_RW VBERROR_EC_REBOOT_TO_RO_REQUIRED --> VB2_REQUEST_REBOOT_EC_TO_RO BRANCH=none BUG=b:124141368, chromium:988410 TEST=emerge-nami coreboot Cq-Depend: chromium:2143030 Change-Id: Id82cf85f49dfb63a9c3d41aacd3969786bffcac7 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40749 Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/tigerlake: Fill PcieRpClkReqDetect from devicetreeMeera Ravindranath
This CL adds support to fill PcieRpClkReqDetect UPD from devicetree. Filling this UPD will allow FSP to enable proper clksrc gpio configuration. BUG=None BRANCH=None TEST=Build and boot tglrvp. Change-Id: Iad0ba94fea019623a5b98fff0cb4a2cd1d2a7bd7 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-05-01mb/google/hatch/vr/puff: Add psys_pmax calculationTim Chen
This patch adds psys_pmax calculation. There are two types of power sources. One is barrel jack and the other is USB TYPE-C. The voltage level is fixed for a barrel jack while TYPE-C may vary depending on power ratings. We need to get voltage information from EC and calculate correct psys_pmax value. The psys_pmax needs to be set before FSP-S since FSP-S will handle the setting passing to pcode, so move the routine ahead to variant_ramstage_init. BUG=b:151972149 TEST=emerge-puff coreboot chromeos-bootimage check firmware log and ensure psys_pmax is passed to FSP check the data from dump_intel_rapl_consumption in the OS and ensure the power data is close to an external power meter. Change-Id: Iff767d4b44a01e766258345545438a54a16d1af5 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-01sb/common/smihandler: Fix 16-bit read/write to PCI_COMMAND registerElyes HAOUAS
Change-Id: Ib403f5a231f86bdc60b956e72a4ae631aa6a3899 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-01mb/google/dedede: Enable USB port for camera supportIan Feng
Support USB Chicony user facing camera. BUG=b:155109736 BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using user facing camera. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I7580a58086977e239dca49c1def4f03583831662 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01sb/intel/i82801jx: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: If39cdfb21fec307141593f2482e014e146d4f1f2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/i82801ix: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I5a07a00e1183ef834d97c11268935617cfe17faa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/lynxpoint: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I81b740e0cfcf0e1bf096427b45ffba06d357fee6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/ibexpeak: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I212ef304a03d068232f50a71c318e2b468336339 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/amd/stoneyridge: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I7b39e895501c3bc672a9dffec06b7969dc2f911f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>