| Age | Commit message (Collapse) | Author |
|---|
|
Boot issue while using FW slot A has been root-caused to the usage of
same TLB to map HW Crypto engines and SPI flash. With upcoming PSP
release, this TLB usage conflict has been resolved. Hence enable CCP
DMA.
BUG=b:240175446
TEST=Build and boot to OS in Skyrim with PSP verstage using CCP DMA.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I2b12adb7e94e489bf07963a6f9a829cf4b36ad5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Currently bootblock does not initialize eSPI if it is already done in
PSP verstage. But some other component is clobbering the eSPI
configuration causing timeouts in EC communication after the boot flow
hits x86. To workaround this issue, re-initialize eSPI in bootblock.
BUG=b:217414563
TEST=Build and boot to OS in Skyrim with PSP verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I41c0b2816a106a6a547f3cb372693e1bb7f23734
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This adds a default early GPIO table in the case of us not being
able to identify a valid board ID.
Primarily, this is useful in the case of EC issues to ensure
that debug interfaces (e.g. UART) are always up and available.
BUG=b:238165977
TEST=Boots and no errors on simics
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I135dc6c29bc23195afe5c78eb79992691652d9e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66394
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some PCI capabilities should only be enabled if it is available not
only on a device, but also all bridge upstream of it. Checking only
the device and the bridge just above it may not be enough.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I1237d3b4b86dd0ae5eb586e3c3c407362e6ca291
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66383
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
'parent_cap' should be found from 'parent' instead of 'dev'.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I99dab83d90287ca924d30dc4aeac0ff96e877e5c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Update generated FSP headers for Alder Lake N from v3222.03 to v3267.01.
Changes include:
- Add UPD Lp5BankMode
- Update UPD Offset in FspmUpd.h
BUG=b:240373012
BRANCH=None
TEST=Build using "emerge-nissa intel-adlnfsp"and boot Nissa.
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Change-Id: I7b921e2aa467593a1c764fc554e2e83e8bb522e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66222
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Add active policy
2. Set critical policy trigger point to 105C
3. Correct TSR location
BUG=b:240634844
TEST=emerge-draco coreboot
values provided and verified by thermal team
Change-Id: I0d91bad03cbdeea5c84b533580ac98072ce0110b
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
PERST# is supposed to be de-asserted in GC6 exit, but the original
patch used the CTXS Method, which drives a GPIO low, instead of
STXS, because PERST# is active-low. This patch fixes that.
BUG=b:214581763
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ib0adb8efe5e2cc733ae2228614c58c124ba3f11b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The lid sensor is on a daughterboard which can cause unintended
shutdowns when not connected. Disable lid sensor based shutdown behavior
in depthcharge until we have a better solution.
BUG=b:240005819
BRANCH=firmware-brya-14505.B
TEST=booted ghost, no longer shuts down due to missing lid sensor
Change-Id: I69f70255dee1b69e05b112c0174f5f52d1368837
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Support for feature "In-Band ECC" not available for Tiger Lake
Similar to Elkhart Lake, Tiger Lake also provides this feature.
Ported from Elkhart Lake (CB:55668)
Bug = N/A
TEST = Build and boot Siemens AS-TGL1
Change-Id: Ie54d5f6a9747fad0105d0f8bf725be611bb8cf60
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The POWERCONTROL and PLATPOLICY NVJT subfunctions were incorrectly set
to 2 and 3, respectively. While looking at the ACPI code, Nvidia noticed
these are supposed to be 3 and 4, also respectively, so this patch fixes
that.
BUG=b:214581763
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I0f808aba7072b943ee2fad20e06ff39a9b54903d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
BUG=b:240624460
TEST=None
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: I8542c9bb624a366bc1bb01f6eae66ba97520d19c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66381
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure the rcomp, dqs and dq tables based on the schematic
dated July 17/2022 and Intel Kit #573387.
TEST=Built successfully
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I092f42db252052382d377a4ae48dc25f73080a3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66202
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds `_DEPRECATED_` tag to ChromeOS boot mode related event
logging types as below:
* ELOG_TYPE_CROS_RECOVERY_MODE <---- to record recovery boot reason
while booting into recovery mode
* ELOG_TYPE_CROS_DEVELOPER_MODE <--- if the platform is booted into
developer mode.
* ELOG_TYPE_CROS_DIAGNOSTICS <---- if the platform is booted into
diagnostic mode.
Drop static structure `cros_deprecated_recovery_reasons` as it has been
replaced by vb2_get_recovery_reason_string() function.
ELOG_TYPE_FW_BOOT_INFO event type is now used to record all those
related fw boot info along with ChromeOS boot mode/reason etc.
BUG=b:215615970
TEST=Build and boot google/kano to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I932952ce32337e2d54473667ce17582a90882da8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When GPP_B2 output high, there is a leakage path. This patch fix it by
setting the pin NC.
BUG=b:233959105
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Change-Id: I3c833d5d62c715960dcb27494a0b9b93c91e8f2f
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update header files for FSP for Meteor Lake platform to
version 2304_01, previous version being 2253_00.
FSPM:
1. Removed CpuCrashLogDevice
2. Address offset changes
FSPS:
Includes below new UPDs
1. VpuEnable
2. SerialIoI3cMode
3. ThcAssignment
4. PchIshI3cEnable
BUG=b:240665069
TEST=emerge-rex intel-mtlfsp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I9740e5877af745124d573425da623e814d8df5d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66289
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the reference to `CpuCrashLogDevice` UPD since FSP v2304.01 has deprecated this UPD.
BUG=b:240665069
TEST=build rex coreboot
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I23223fd7936a60d974229b553de255a7dcf4416b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66357
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Building firmware for Brya is currently broken due to the RO_FWID region
for adlrvp_m_ext_ec bloating past 64 characters.
The CONFIG_MAINBOARD_PART_NUMBER is catenated onto the
CONFIG_MAINBOARD_VENDOR string, which for Intel, makes for a very long
trunk string that the kernel version will then be added to form the
RO_FWID string. For Intel, that trunk string is already pretty long at :
"Intel Corporation_Alder Lake Client Platform".
Shortening the CONFIG_MAINBOARD_PART_NUMBER should address this issue
for now.
BUG=b:241273391
TEST="emerge-brya coreboot chromeos-bootimage" and verify it builds
successfully
Change-Id: Ie862c87dd9a24743f249f1b10862ca6f3295db23
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I774be6d80e0aae725ecb1027501c8d66e0bf5a08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This function is only called from the same compilation unit, so turn it
into a static function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5c2deaa46f69c763df9612e39415b37c60d631be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Enabling required config items to execute verstage in PSP.
BUG=b:217414563
TEST=Build and boot to OS in Skyrim with PSP verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Iee14dc80cb6691acb5cb59a21da5a3dff69f7dd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66135
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use 0x016llx to print device resource info so that both 64bit and
32bit resources could be displayed correctly.
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Change-Id: I0ec4c47cca4a09ceb7dc929efaa5630b1f9df81c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The check was recently removed to allow callers to pass `count == 0`.
Dereferencing the `msg` array is invalid in that case, though. Linux,
where we borrowed the i2c interface from, also treats this with -EINVAL.
Change-Id: I1eec02dd3a3fcf2d477a62cc65292fca40e469d3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
We actually want the bus driver to process the 1 zero-length write
we are passing. So set the count to 1.
Change-Id: I5a41abb68c27a83715b6baec91ece9fa90b66a8c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Tested-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66337
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Some definitions are the same in dramc_soc.h for MT8192, MT8195 and
MT8186, so we move them to dramc_soc_common.h
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3095333e62abf98de1f2d27033baeeba7a4cad79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66276
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Retrieve the SKU ID for Geralt via CBI interface. If that failed
(or no data found), fall back to ADC channels for SKU ID.
- The RAM code is implemented by the resistor straps that we can read
and decode from ADC.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I31626e44bd873a3866c9bd1d511b476737f15a20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66275
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure ChromeOS specific GPIOs:
- Open-drain pins to high-z mode:
GPIO_EC_AP_INT_ODL, GPIO_GSC_AP_INT_ODL and GPIO_WP_ODL.
- GPO mode:
GPIO_AP_EC_WARM_RST_REQ, GPIO_EN_SPKR and GPIO_XHCI_INIT_DONE.
This patch is based on MT8188G_GPIO_Formal_Application_Spec_V0.3.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I84d3f62ec8a3966fe1982d5d4cf6ff270450d4bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66274
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialize I2C bus 1 for TPM control.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: If5807c9bb39260315ecbc55305def483bd2b8c51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66273
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update SoC GPIO setting of unused DMIC channel according to beadrix
schematics.
GPP_S2 : NF2 -> NC (DMIC1_CLK)
GPP_S3 : NF2 -> NC (DMIC1_DATA)
BUG=b:203113413, b:237224862
BRANCH=None
TEST=on beadrix, validated by beadrix's DMIC working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ibe2f432cd74b546218ff4ee6e428e9eed9ac611f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add wifi sar for oscino
BUG=b:240373077
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede
coreboot-private-files-baseboard-dedede
coreboot
chromeos-bootimage.
Cq-Depend: chrome-internal:4893022
Change-Id: I44cbe8ee08d6136ed116623046893c9749795e50
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66176
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update SoC GPIO setting of adding BC1.2 SLGC55545 according to beadrix
schematics.
GPP_A18 : NC -> NF1 (USB_OC0_N)
BUG=b:214393595, b:226294980
BRANCH=None
TEST=on beadrix, validated by beadrix's Type A working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I746931582cc12f49f7f1c667563350ebac8ddfa1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Atlas uses IoT FSP.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I4c20600e0b62367e6e58908cf9cf916f309e6362
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Add new config FSP_TYPE_IOT to add the IoT FSP option so that
respective mainboard Kconfig can use IoT FSP if needed.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I01d891348c039269138e64290ae3d6ec75d3c687
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Enable DRIVERS_GENESYSLOGIC_GL9755 support for kuldax.
BUG=b:232858957
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I1b2c0bff8497d727c697ea6287078055a39bd1f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Set tcc_offset value to 3 in devicetree for Thermal Control Circuit
(TCC) activation feature. This value is suggested by Thermal team.
BUG=b:240600260
TEST=emerge-draco coreboot
verified by thermal team
Change-Id: I3044643d52f1d6e883beb3ec87a77f32d086f46c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
UFS storage devices require the bRefClkFreq attribute to be set to
operate correctly in high speed mode. The correct value is determined by
what the SoC / board supports. For the ADL UFS controller, it is
19.2 MHz.
a) Introduce a new ACPI property "ref-clk-freq".
b) Add support to configure this property using an SoC Kconfig.
Kernel patch:
https://web.archive.org/web/20220801060732/https://lore.kernel.org/all/
20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeid/
BUG=b:238262674
TEST=Build,boot Nirwen and dump SSDT entries and check that the kernel
correctly parses ref-clk-freq as 19.2 MHz.
Scope (\_SB.PCI0)
{
Device (UFS)
{
Name (_ADR, 0x0000000000120007) // _ADR: Address
Name (_DDN, "UFS Controller") // _DDN: DOS Device Name
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
/* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"ref-clk-freq",
0x0124F800
}
}
})
}
}
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: I80c338a8a61f161b0feb6c5a3ca00cf5e0cfb36c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Switching off the pads of the internal crystal oscillator that connect
to the crystal on the board in S0i3 saves a little power, so enable it.
No measurements to quantify the power savings have been made. PPR #57243
revision 1.59 was used as a reference.
BUG=b:237647468
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I52f14ae5c614ad8ff0479b619de7164afa1e7648
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66336
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This change adds support to enable edp gpios, display init for
herobrine.
BUG=b:182963902,b:216687885
TEST=Validated on qualcomm sc7280 development board.
Monitor name: LQ140M1JW49
Change-Id: I01dbe23afbb3d41d87f24cb7dcfa456cb7f133fb
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64885
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Add support for edp aux read and write.
- Update edp panel properties based on edid read.
- Configure edp controller and edp phy.
Panel details:
Manufacturer: SHP Model 1523 Serial Number 0
Made week 53 of 2020
EDID version: 1.4
Digital display
8 bits per primary color channel
DisplayPort interface
Maximum image size: 31 cm x 17 cm
Gamma: 220%
Check DPMS levels
Supported color formats: RGB 4:4:4
Default (sRGB) color space is primary color space
First detailed timing is preferred timing
Supports GTF timings within operating range
Established timings supported:
Standard timings supported:
Detailed timings
Hex of detail: 5a8780a070384d403020350035ae10000018
Detailed mode (IN HEX): Clock 346500 KHz, 135 mm x ae mm
0780 07b0 07d0 0820 hborder 0
0438 043b 0440 0485 vborder 0
-hsync -vsync
Did detailed timing
Hex of detail: 653880a070384d403020350035ae10000018
Detailed mode (IN HEX): Clock 144370 KHz, 135 mm x ae mm
0780 07b0 07d0 0820 hborder 0
0438 043b 0440 0485 vborder 0
-hsync -vsync
Hex of detail: 000000fd003090a7a7230100000000000000
Monitor ranges (bare limits): 48-144Hz V, 167-167kHz H, max dotclock
350MHz
Hex of detail: 000000fc004c513134304d314a5734390a20
Monitor name: LQ140M1JW49
Changes in V2:
- Remove Misc delays in edp code.
- Move mdss soc code to disp.c
- Update EDID read using I2C write & read.
Changes in V3:
- Remove unrelated delays.
- Misc changes.
BUG=b:182963902,b:216687885
TEST=Validated on qualcomm sc7280 development board.
Monitor name: LQ140M1JW49
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Change-Id: If89abb76028766b19450e756889a5d7776106f95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
This patch adds a function to calculate best rational approximation
for a given fraction and unit tests for it.
Change-Id: I2272d9bb31cde54e65721f95662b80754eee50c2
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66010
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A DDR5 DIMM internally has two channels each of width 32 bit.
But the total physical channel width is 64 bit.
BUG=b:180458099
TEST=Boot DDR5 to kernel
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: Ic5e9c58f255bdf86a68ce90a4f853bf4e7c7ccfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52730
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Enable I2C2 and register touchscreen ACPI device for pirika.
BUG=b:236564261
TEST=touch screen is functional.
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Id2fd5606b7126eabc1c88bf516198ff00b5d75dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Follow latest schematic, GPP_A17 is used to enable AMP power.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=Check I2C scan can see the AMP return ACK.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ia6c52302a12ddec68303714ac07e96a65a8f8fb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Use the new "detect" method instead of "probed". Fixes an uncommon issue
where i2c-hid fails to initialize the device on Linux.
Tested on: gaze15, gaze16-3060, lemp10, oryp8
Tested:
- Linux: Touchpad works across 50 reboots
- Windows: Touchpad is still detected as an I2C HID device
- Windows: Extra I2C HID devices are not shown in Device Manager
Change-Id: I6a899c64a6d77b65a2ae57ab8df81cd84b568184
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Initialize SPI bus 0 for Chrome EC control.
TEST=build pass
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I6de5ea8a0273a3b0c725e4cdbcf69f4db74c5db7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Copy the constraint from ADL-S to ADL-P.
Fixes the following warning in Linux on System76 oryp9, which has an
NVIDIA GPU on the bridge.
pcieport 0000:00:01.0: can't derive routing for PCI INT A
This, in turn, resolves an IRQ conflict with the PCH HDA device that
would cause a stack track on every boot.
irq 10: nobody cared (try booting with the "irqpoll" option)
<snip>
[<00000000bf549647>] azx_interrupt [snd_hda_codec]
Disabling IRQ #10
Change-Id: I550c80105ff861d051170ed748149aeb25a545db
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66285
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure eMMC DLL tuning values for Craask board.
BUG=b:238985924
TEST="Use the value to boot on Nivviks and Craask successfully."
Change-Id: I14f3e2329404cca94e14034d1fb52fcb99a2ddc9
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66218
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The first CSE Lite SKU is available, therefore enable the Kconfig
option to have the CSE reboot the system into its RW FW during a cold
boot.
BUG=b:240228892
TEST=TBD
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I00ef4176cf08cbeed06e446cfe68f06cb1ea27b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66287
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch calls into vboot API (vb2api_get_fw_boot_info) to retrieve
FW slot boot information like (tries count, current boot slot, previous
boot slot, previous boot status and boot mode).
Upon retrieval of the vboot information, elog callback from ramstage
records the info into the eventlog.
Additionally, this patch refactors the existing event logging mechanism
to add newer APIs to record vboot firmware boot related information.
BUG=b:215615970
TEST=Build and boot google/kano to ChromeOS and run below command to
check the cbmem log:
Scenario 1:
localhost ~ # cbmem -c | grep VB2
[INFO ] VB2:vb2_check_recovery() Recovery reason from previous boot:
0x0 / 0x0
[INFO ] VB2:vb2api_fill_boot_config() boot_mode=`Developer boot`
VB2:vb2api_get_fw_boot_info() fw_tried=`A` fw_try_count=0
fw_prev_tried=`A` fw_prev_result=`Success`.
....
Scenario 2:
localhost ~ # crossystem recovery_request=1
localhost ~ # cbmem -c | grep VB2
[INFO ] VB2:vb2api_fill_boot_config() boot_mode=`Manual recovery boot`
VB2:vb2api_fill_boot_config() recovery_reason=0x13 / 0x00
VB2:vb2api_get_fw_boot_info() fw_tried=`A` fw_try_count=0
fw_prev_tried=`A` fw_prev_result=`Unknown`.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6882cd1c4dbe5e24f6460388cd1af4e4a05fc4da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65561
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add static check to ensure the reserved APOB DRAM space is the same size
as the MRC_CACHE region specified in the fmap.
Update sabrina APOB DRAM size to match the fmap.
TEST: Timeless builds identical. Test build with a larger MRC_CACHE than
APOB DRAM failed the assert as expected.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia14f6ef94b9062df0612fe96098b1012085ccf9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65878
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to pass PCIe base address to payloads, implement pcie_fill_lb()
to fill coreboot table with PCIe info.
BUG=b:182963902,b:216686574,b:181098581
TEST=Verified on Qualcomm sc7280 development board with NVMe endpoint
(Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is
getting detected in response to 'storage init' command in depthcharge
CLI prompt.
Output logs:
->dpch: storage init
Initializing NVMe controller 1e0f:0001
Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY
Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0
* 0: NVMe Namespace 1
1 devices total
Also verified NVMe boot path that is depthcharge is able to load the
kernel image from NVMe storage.
Change-Id: I1ca2be55b98c8d1b86576072078cdda02ac55940
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57614
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add PCIe domain support for herobrine by enabling it in the devicetree.
BUG=b:182963902,b:216686574,b:181098581
TEST=Verified on Qualcomm sc7280 development board with NVMe card
(Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is
getting detected in response to 'storage init' command in depthcharge
CLI prompt.
Output logs:
->dpch: storage init
Initializing NVMe controller 1e0f:0001
Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY
Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0
* 0: NVMe Namespace 1
1 devices total
Also verified NVMe boot path, that is depthcharge is able to load the
kernel image from NVMe storage.
Change-Id: Ied8fbbc8d20698ee081d93ba184b7d0291bb6a76
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65137
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable PCIe functionality on sc7280 and supply all the needed data
for PCIe generic platform driver.
BUG=b:182963902,b:216686574,b:181098581
TEST=Verified on Qualcomm sc7280 development board with NVMe card
(Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is
getting detected in response to 'storage init' command in depthcharge
CLI prompt.
Output logs:
->dpch: storage init
Initializing NVMe controller 1e0f:0001
Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY
Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0
* 0: NVMe Namespace 1
1 devices total
Also verified NVMe boot path, that is depthcharge is able to load the
kernel image from NVMe storage.
Change-Id: I1f79a0ae2dea594d6026d55a15978eeb92a8ff18
Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com>
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66148
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disabling the Package C-state demotion feature for brya baseboard
as a work around to the S0ix issue and also this doesn't have any
impact on the power and performance measured and verified by the
PNP team.
This feature will be enabled after its functionality is verified with no
issues and also based on its impact on PNP.
BUG=none
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that S0ix issue is resolved.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: Id3941c8870d41b25488c8ac5d38534fa94664d4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This adds SPDX-License-Identifiers to all of the files in src/include
that are missing them or have unrecognized identifiers.
Files that were written specifically for coreboot and don't have license
information are licensed GPL-2.0-only, which is the license for the
overall coreboot project.
Files that were sourced from Linux are similarly GPL-2.0-only.
The cpu/power files were committed with source that was licensed as
GPL-2.0-or-later, so presumably that's the license for that entire
commit.
The final file, vbe.h gives a pointer to the BSD-2-Clause license
at opensource.org.
Change-Id: I3f8fd7848ce11c1a0060e05903fb17a7583b4725
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Sabrina"
This reverts commit 78261e308de5361b2ff045091e8fb18cad2a5035.
Reason for revert: Now that PSP supports a soft fuse flag to toggle the
verstage serial logs, prevent PSP verstage from writing to the UART.
BUG=None
TEST=Build and boot to OS in Skyrim with PSP verstage. Ensure that PSP
verstage logs are not seen twice in the console.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I7ef2d585c320ea5903197939136dd2049a71af95
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
HW Modexp engine is verified to be working fine. Any verification
failures during PSP verstage are because the firmware body is not read
correctly. This might be because of the incorrect SPI ROM mapping. Hence
enable the HW modexp engine for keyblock, preamble and firmware body
verification.
BUG=b:240175446
TEST=Build and boot to OS in Skyrim with PSP verstage using one of the
FW slots.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I8f6742630a7049354a24053fce28c477e53259e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
clang shows the warning below:
src/drivers/elog/elog.c:171:13: error:
format string is not a string literal
(potentially insecure) [-Werror,-Wformat-security]
elog_debug(msg);
^~~
Found-by: clang (13.0.1)
Change-Id: I3f8949f9ce0c4ef4823530c61c503b0883bb5efc
Signed-off-by: Matei Dibu <matdibu@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66262
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add PCIe platform driver for Qualcomm platforms.
Reference:
- linux/drivers/pci/controller/dwc/pcie-qcom.c
- Linux driver base commit: 82a823833f4e3769e82cdb4df1bc2234bc65b16c
BUG=b:182963902,b:216686574,b:181098581
TEST=Verified on Qualcomm sc7280 development board with NVMe card
(Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is
getting detected in response to 'storage init' command in depthcharge
CLI prompt.
Output logs:
->dpch: storage init
Initializing NVMe controller 1e0f:0001
Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY
Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0
* 0: NVMe Namespace 1
1 devices total
Also verified NVMe boot path, that is depthcharge is able to load the
kernel image from NVMe storage.
Change-Id: Iccf60aa56541f5230fa9c3f821d7709615c36631
Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com>
Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53902
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix the license in header file.
BUG=none
BRANCH=firmware-brya-14505.B
TEST=none
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I025f7c571d09e4cc63a659279e63d17c098c01cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
- Move configs for PCIe ports not present on z220_sff_workstation
from the devicetree.cb of base board to the overridetree.cb of
z220_cmt_workstation.
- Add a note for ME/AMT Flash Override jumper, for it is hard to
flash from OEM firmware either internally or externally without
closing this jumper.
- Add a side note for similar HP Compaq Elite 8300 SFF.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I35d8b97f52a83910a61c12b1f7367ee7a19a9ad7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65703
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DPTF Policy and temperature sensor values from thermal team.
BUG=b:236294162
TEST=emerge-brask coreboot
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Iebcfb74c4bc719e6d8d8d9317435becd912eaf85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
futility now supports image truncation and signing of whole images with
a single command invocation. Use it for vboot-enabled coreboot images.
TEST=Build and run coreboot on google/volteer
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I49eb7e977b635ccb9f6c1b76e53c36e82be1d795
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I30bbd0288475fbefec55ce294e7963df1de6aa6a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Change-Id: I21b954ce62259bb77d88775c3086cfac17dd90c7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: If0e9fcea680d487c28a965e944b3333bb5a07026
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60696
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: Ief1d069ae0fb19a2179f08c2e9cf416367661e69
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60674
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace `Add (a, b, c)` with `c = a + b`.
Change-Id: If848d391e5ec33ebfb08515414739dbdd5011e08
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch enables display port configuration as per the Rex
schematics.
TEST=Able to dump FSP UPD to ensure the override is successful.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9e81d037416e46e52cb72344425d6d8725dae192
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Pujjoflex support OZ711LV2LN SD card controller,
Select the Bayhub LV2 driver for OZ711LV2LN SD card.
BUG=b:215487382
TEST=Build FW and checking SD card work as expected in OS.
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I6759fde1eaf24599a1fdb364d6e78f4e4e12f311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Create RAM IDs for:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D2DS-026 WT:B 1 (0001)
MT62F2G32D4DS-026 WT:B 2 (0010)
BUG=b:240289148
TEST=emerge-rex coreboot
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Ib24e07bca363984db3484aa500f7d6ea4817e517
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The gpios and the tick delay register are different between MT8188
and previous MediaTek SoCs, so we need to add this patch to support
SPI.
TEST=build pass
BUG=b:236331724
Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com>
Change-Id: I6065b9d285dfd36c191f274f500fdb694920276e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66185
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8188 SPI tick delay setting is moved to `spi_cmd_reg` register which
is different from previous SoCs, so we define a macro to get the
designated register.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia30e94a8688c0e1c1d4b3d15206f28e5bd8c9bd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66184
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I869c0879d09e00cf66882adb728c9ccb6ac57e03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66183
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass.
BUG=b:233720142
Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com>
Change-Id: Ic300b70a38ac204b098ca9ab15cf7045b66fd76d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66182
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add RTC header file for SoC-specific settings. Add RTC support in
romstage.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com>
Change-Id: I38115ce0c9a4e1c1b2b7c8e6d40f47e99f7f86b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66181
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the common definitions to rtc_reg_common.h, so we can reuse those
definitions on MT8188.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia1d916a88b7cb875b35ee5813b7b52d9e98f5009
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66180
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=get voltage as 340mV for channel 0 in MTK EVB.
BUG=b:233720142
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: Idd1edcce6cb62fcf6991bb9342c409150989c5ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The AUXADC register definitions are the same for all MediaTek SoCs, so
we move struct mtk_auxadc_regs to auxadc_common.h.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I48978a93137a7de42f8ea2873be3130cb8f534f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch override `CnviBtCore` FSP UPD.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I90c9b360969aada0b0e031d62b48476fac5cee0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add CS42L42 support in device tree.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=Check cs42l42 driver can probe successfully in kernel.
cs42l42 i2c-10134242:00: Cirrus Logic CS42L42, Revision: B1
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I861f47c12f4cebb016a4cfbe225f97d34d55e233
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Remove the parameter and set I2C bus speed to fast. Will fill the
tuning value after real tuning.
BUG=b:240006200
BRANCH=firmware-brya-14505.B
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Iba7fe4551959617ecfa49719c1124bf85d624c31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Create the gaelin variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:239514438
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_GAELIN
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Change-Id: I7f1ff8690c7c57f8960e004d0490d5cede8667f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Add TDP and Power Limit settings for ADL-S 8+8 150W, 4+0 and 2+0.
The System Agent PCI IDs were not present in older 2.1 revision of
DOC #619501. Now that the mapping of these IDs to SKUs is known, fill
the missing TDPs and Power Limit settings based on DOC #626343.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I23dd8478e60bcc81a1048f2f6e6717dd281d1a69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Add missing System Agent PCI IDs for ADL-S 4+0 and 2+0 to configure
VccIn Aux Imon IccMax. They were not present in older 2.1 revision of
DOC #619501. Based on DOC #619501 rev 2.6.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Idfd57ce9b63db5d5fcc9d4efb8aa27ed7cc6222d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Based on DOC #619501, #634885, #626343.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib50db521e4d127a773f903b45d4bec5c5cc180d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
The patch updates platform_is_resuming() API such that platform resume
state is determined from the saved state (CBMEM) instead of checking PMC
registers (PM1_STS & PM1_CNT) as they are getting cleared (before/early)
ramstage.
coreboot sends DISCONNECT IPC command which times out during resume (S3)
if system has servoV4 connected on port0. The issue occurs only during
the first cycle of resume (S3) test cycle after cold boot due to side
effect of platform_is_resuming() API that is not determining the resume
(S3) state correctly in ramstage.
PM1_STS and PM1_CNT register gets cleared at the start of ramstage.
platform_is_resuming() function was checks the cleared register value
and fails the condition of resume (S3) resulting in sending DISCONNECT
IPC command. Checking the platform resume state from the CBMEM saved
state using acpe_get_sleep_type() function helps cross verify the
system previous state at the later part of ramstage.
localhost ~ # cbmem -c | grep ERROR
[ERROR] EC returned error result code 3
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:0 to initial state
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0x200a7 failed
[ERROR] pmc_send_ipc_cmd failed
[ERROR] Failed to setup port:1 to initial state
[ERROR] GENERIC: 0.0 missing read_resources
[ERROR] PMC IPC timeout after 1000 ms
[ERROR] PMC IPC command 0xd0 failed
[ERROR] PMC: Failed sending PCI Enumeration Done Command
BUG=b:227289581
TEST=Verified system boots to OS and verified below tests on
Redrix (ADL-P) and Nivviks (ADL-N)
1. coreboot doesn't send the DISCONNECT during S3 resume
2. suspend S3 passes with both suzyq and servoV4 connected
3. After S3 resume, system detects the pen drive with Superspeed
4. After system resumes from S3, hot-plug the pen drive, system detects
the pen drive
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I353ab49073bc4b5288943e19a75efa04bd809227
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66126
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add weida touchscreen support for drawcia.
BRANCH=dedede
TEST=Build and verify that touchscreen works on drawcia.
Change-Id: Ic76f3529771c6eeeafef7ca50fc400065aac2211
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65471
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: I4e219bea8df64db1d49beb8534f0f37fee0df5b6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: Ifffd21a663739f72a5584e26b79b0627dd532d9e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: I3aebd29bba285229979b79867c881018f61e2060
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0ae8c6624b79ce6c269244bd1435900d4d7f997a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
set i2c address to 0x14 for Goodix touchscreen
BUG=b:239180430
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I11a2d9c684bc511b3942f88f74a2495e796bc3c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
When the dGPU is entering GCOFF, the link should first be placed into
L2/L3 as appropriate for the design, then when exiting, the link should
be placed back into L0. This patch fixes that oversight.
BUG=b:239719056
TEST=build
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia3bdfe5641216675e06ebe82ffe58bf8c049b26b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The EEs noticed this pin was misbehaving; it was accidentally set to a
low output, but should be open-drain (NC). This patch fixes that.
BUG=b:237837108
TEST=verified by EEs
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie76a951320c49b9fbc1f23b96f04c9f86ad44d42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
For some yet unknown reason, when this GPIO is locked, there is an
interrupt storm for IRQ #9 apparently caused by GPE 0x66. GPP_F14 is set
to GPE 0x64 on the ADL platform, so this doesn't quite make sense. This
patch removes the lock and fixes this IRQ storm, but the root cause is
not identified yet.
BUG=b:236997604
TEST=`grep ' 9:' /proc/interrupts` shows a reasonable value now
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3d1c66fac80a173798ae33e48b1776d9f4fb5eaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
After staring at lots of scope shots, the EE has determined that a few
modifications to the GCOFF sequence can be made:
- Remove delay between PERST# assertion and GPU_ALLRAILS_PG deassertion
- Remove delay after ramping down FBVDD
This patch implements these minor changes.
BUG=b:240199017
TEST=verified by EE
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7d492b3e65a231bc5f64fe9c3add60b5e72eb072
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
After some debugging, it has been determined that the ASPM L0s substate
is functional, but there is still some problem with ASPM L1 substates,
so this patch updates ASPM status for the dGPU from disabled to L0s
only.
BUG=b:240390998
TEST=tested with nvidia tools
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I584bdbf26eda20246034263446492bf4daf5f3b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
There are 3 more CPU PCIe RP UPDs that are the current code is not setting,
and some boards may want to set these, so this patch adds support to set
these UPDs. The default values for any existing boards using these UPDs
should not change with this patch.
The UPDs are:
- CpuPcieRpDetectTimeoutMs
- CpuPcieRpAspm
- CpuPcieRpSlotImplemented
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id48019f984e8e53ff3ce0c3c23e02dab65112c99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66197
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Generate SPD id for hynix H54G68CYRBX248
BUG=b:239899929
BRANCH=firmware-brya-14505.B
TEST=run part_id_gen to generate SPD id
Change-Id: I96babe340678ca9b82b06d3193b93a7676f23fef
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
