summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-06-01sc7280: Improve performance by removing delays in cpucp initSudheer Kumar Amrabadi
As cpucp prepare takes 300 msec moving to before ramstage BUG=b:218406702 TEST=Validated on qualcomm sc7280 development board observed total timestamp as 1.73 sec from 1.97 sec Change-Id: I1a727514810a505cd1005ae7f52e5215e404b3bb Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-05-31soc/qualcomm: Increase SPI frequency to 75 MHzShelley Chen
Increase frequency of sc7280 to 75 MHz. Setting the delay to 1/8 of a cycle as a result of experimentation. BUG=b:190231148 BRANCH=None TEST=Make sure that herobrine board boots HW Engineer measured SPI frequency and verified running at 75 MHz Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I3cf5a7c85f12800a11ece397a354349f2a0a235f Reviewed-on: https://review.coreboot.org/c/coreboot/+/64673 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-31mb/starlabs/lite/glk: Don't configure GPIO's 147 through 156Sean Rhodes
These are configured by the TXE, so they do not need to be configured. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia1bf4e32aa156a0e1a74df2f62eb31cdadb376a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-31mb/starlabs/lite/glk: Simplify GPIO macrosSean Rhodes
Use shorter macros to configure GPIOs. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I91961658dca0902080576134e63e6d8a7c78d711 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-31mb/starlabs/lite/glk: Disconnect unused GPIOsSean Rhodes
Disconnect GPIOs that are unused or not connected. Also, update comments that are vague or have errors. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic83797b8a8e05eed99db0356f360a329f6fbf347 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64452 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-31x86/include/arch/boot: Fix header guardElyes Haouas
While on it, reformat code and remove unused macro. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I63e413820cb3f4dfa21d1692301348ecdb3190b9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2022-05-31mb/google/nissa/var/craask: Generate SPD ID for supported memory partTyler Wang
Add supported memory parts in mem_parts_used.txt, and generate SPD id for this part. K3LKLKL0EM-MGCN BUG=b:229938024 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Ie022dd95929549ddd403d4c1d1c52174fd3fd721 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-05-31soc/qualcomm: Replace <cbfs.h> with <program_loading.h>Elyes HAOUAS
Change-Id: I0cd9960be80330b0b0bf476213bdc242db647e98 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-31arch/arm{64}/include: Remove unused 'boot.h' fileElyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ibcbaa39ee3922e1f7add8694d8c7c491881d7124 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2022-05-31drivers/i2c/generic: Add support for i2c device detectionMatt DeVillier
Add 'detect' flag which can be attached to devices which may or may not be present at runtime, and for which coreboot should probe the i2c bus to confirm device presence prior to adding an entry for it in the SSDT. This is useful for boards which may utilize touchpads/touchscreens from multiple vendors, so that only the device(s) present are added to the SSDT. This relieves the burden from the OS to detect/probe if a device is actually present and allows the OS to trust the ACPI _STA value. Change-Id: I1a4169ed6416d544773a37d29cdcc154d3c28519 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63211 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-05-31dev/i2c_bus: Add declaration, implementation of i2c_dev_detect()Matt DeVillier
This patch adds the I2C equivalent of an SMBus quick write to an I2C device, which is used by some I2C drivers as a way to probe the existence (or absence) of a certain device on the bus, based on whether or not a 0-byte write to an I2C address is ACKed or NACKed. i2c_dev_detect() is implemented using the existing i2c bus ops transfer() function, so no further work is needed for existing controller drivers to utilize this functionality. Change-Id: I9b22bdc0343c846b235339f85d9f70b20f0f2bdd Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64537 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-31drivers/i2c/dw_i2c: Adjust to handle 0-byte transfersMatt DeVillier
0-byte writes can be used as a way to probe/check presence of an i2c device, so adjust _dw_i2c_transfer() to immediately set the STOP bit and raise logger level for TX abort messages when the segment length is zero. Adjust dw_i2c_transfer() to allow zero-segment-length messages to be passed thru to _dw_i2c_transfer(). Tested as part of entire i2c-detect patch train. Change-Id: I518e849f4c476c264a1464886b1853af66c0b29d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-05-31mb/google/brya/var/kinox: Select VBT based on FW_CONFIGDtrain Hsu
Select vbt bin files based on DB_DISPLAY field of FW_CONFIG. BUG=b:233690293 TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Idb92be66927259732bfd27e4db2c9f242da7d200 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-05-31mb/google/brya/var/taniks: Modify DPA value to 100 for taniksLeo Chou
In order to meet the OEM's acoustic specifications, the pre-wake randomization time (DPA) is set to 100. BUG=b:228410327 TEST=build FW and checked DPA value by fsp log. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: Idaf3f931a2c0f2373445948e5f53a82328ec7ba2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-05-31mb/google/nissa: Add and default to 16 MB layoutKangheui Won
Future nissa devices will mostly use 16MB SPI flash. Add 16MB layout and make it default for nissa. BUG=b:202783191 TEST=build nissa and brya firmware, check they're still 32MB Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I04ae46d62d3e018610ca2533c186dda980bd67bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/64716 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-05-31drivers/spi: Add Winbond W25Q256JW detailsRitul Guru
Add winbond W25Q256JW chip details. Change-Id: I0dab96701285be95a76cee674f83339bc63d9f82 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-05-31mb/lenovo: Rename t440p to haswellFelix Singer
In preparation to follow-up commits, rename the mainboard folder from t440p to haswell, which will have more variants later. Change-Id: I4a9d68d54d5f0821bbf85faaa620855d456c97f3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-05-31mb/starlabs/lite/{glk/glkr}: Configure prt0_gpioSean Rhodes
PERST_0 is not used, so set this to GPIO_PRT0_UDEF (undefined) to ensure that an undefined address is not added to GNVS. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iac9b116b2fa28824a89db28911188364dc9a1a53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-31x86/null_breakpoint: Remove trailing space from log messagePaul Menzel
Currently, the log message contains an unwanted trailing space, so remove it. [ERROR] Null dereference at eip: 0x3ffad01a Change-Id: I64509ca4bad94c7db4279cc4c1e6fee2bba2e035 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-05-31cpu/x86/smm_module_load: Fix SMM stub paramsKyösti Mälkki
There is NULL dereference in adjust_apic_id_map() and updating apic_id_to_cpu[] array within SMM stub fails. Initial apic_id_to_cpu[] array may have worked for platforms where APIC IDs are consecutive. Change-Id: Ie59a731bfc883f8a47048b2ceacc66f44aa5b68c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-30mb/asrock/h81m-hds: Reorder selects alphabeticallyFelix Singer
Change-Id: I18398efefcb4171496c39462c23514ad61659213 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-30mb/asrock/b85m_pro4: Reorder selects alphabeticallyFelix Singer
Change-Id: Ic22fcbb7923ecac4c70147ae642ac28fac3e6e6d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-30mb/lenovo/t530: Reorder selects alphabeticallyFelix Singer
Change-Id: I772ef94c860a26214bdae367d9863a56d5df9469 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-30mb/lenovo/t530: Select board-specific options per boardFelix Singer
Move board-specific selects out of common configuration and add them to each board where necessary. Change-Id: I9940ad2e963458e4bc50c2a2957bb72cbd4109be Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-30mb/lenovo/t530: Move selects from Kconfig.name to KconfigFelix Singer
Move selects from Kconfig.name to Kconfig so that the configuration is at one place and not distributed over two files. Change-Id: I8ef0e67a8f26b98acea777afb26ed221bfa90153 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-30mb/google/brya/var/vell: Move SPK0/SPK1 to I2C7eddylu@ami.corp-partner.google.com
To support speaker AMP CS35L53-CWZR'S I2C needs to split to two I2C ports BUG=b:207333035 BRANCH=none TEST=built and verified speaker Signed-off-by: Eddy Lu <eddylu@ami.corp-partner.google.com> Change-Id: I8095abc4fc3233b21b818a508c84cd59b39fc1d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
2022-05-30Revert "mb/google/brya/var/vell: Remove unused i2c7 settings"Shon Wang
This reverts commit bd9cec8ae5755e898d107fd061fc2e2f983552b9. Reason for revert: Enable i2c7 for amp changing to 2 channel because vell setting amp on i2c0 and i2c7 on next phase BUG=b:229334701 TEST=emerge-brya coreboot chromeos-bootimage && $powerd_dbus_suspend && checks EC log and ensures the DUT could enter s0ix. Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Change-Id: I5988cd9926b2c9ced1d111774abaa897bef91537 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-05-30src/Kconfig: Fix a spelling issueMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ibba8558dd1825a864b427097aff8552933cc6fc3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-05-30mb/google/brya/var/kinox: Correct the target of DPTF active policyDtrain Hsu
Kinox has four temperature sensors. Modify the target of DPTF active policy to map correct temperature sensor. BUG=b:231380286 TEST=Boot to Chrome OS and doesn't see "DPTF: Invalid sensor ID" from ec comsole. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Icb5c285a6f483e2a1b6510a962ff7f7f6e9a79e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-05-29mb/biostar/a68n_5200: Use pci_or_config8()Elyes Haouas
Change-Id: I4be0a4ad980b4167eaaafc22399b680abf011553 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-29cpu/x86: Allow SoC to select the LAPIC access modeSubrata Banik
Intel Meteor Lake SoC expects to select x2APIC for accessing LAPIC hence, this patch provides an option where SoC code choose the correct LAPIC access mode using choice selection. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I39c99ba13ad6e489c300bd0d4ef7274feeca9d4f Reviewed-on: https://review.coreboot.org/c/coreboot/+/64647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-05-29mb/google/brya: Increase Resizable BAR address space limit to 32 bitsTim Wawrzynczak
The dGPU used for some Brya projects requests 32 bits of address space for one of its BARs via the Resizable BAR mechanism. This Kconfig is currently set at 29 bits for brya, so the allocation currently is capped at 29 bits. This patch sets the limit to 32 bits for brya boards, which is enough for the GPU. BUG=b:214443809 TEST=all of the dGPU PCI BARs on agah can be successfully allocated Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I61dbe47f1f316967d052bae748ff23babde61ef0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-29device: Add IORESOURCE_ABOVE_4G flag to PCI64 resourcesTim Wawrzynczak
When a PCI resource is marked as 64-bits, the IORESOURCE_ABOVE_4G flag needs to be passed to the v4 allocator to ensure that the resource will be allocated in a range large enough to succeed. BUG=b:214443809 TEST=agah can successfully allocate all of the Nvidia GN20 BARs Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I3f16f52f2a64f8728853df263da29871dca533f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-29mb/google/brya/var/agah: Fix GPU power sequencingTim Wawrzynczak
While testing the power sequencing code for the GPU, a few mistakes were found. This patch fixes those errors: 1) FBVDD load-switch enable is active-low 2) NVVDD VR enable is active-high 3) GPU_PERST_L should be driven low during GPIO table programming 4) The BAR saving code missed the top 32 bits of 64-bit BARs 5) sequence_rail() assumed the pwr_en_gpio and pg_gpio were the same polarity 6) PEG vGPIOs were not programmed to the correct NF BUG=b:233552225 TEST=dGPU is able to successfully enumerate over PCIe bus Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I85767d382012a0c7dfdb1f849768e0160f06c273 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-29mb/google/brya/variants/felwinter: Enable Bluetooth offload supportMac Chiang
Add fw_config support NMAX98360_ALC5682VS_I2S_2WAY and I2S2 vgpio config and enabling cnvi_bt_audio_offload UPD bit. BUG=none TEST=emerge-brya coreboot Signed-off-by: Mac Chiang <mac.chiang@intel.com> Change-Id: I64a4e5479905911b2e9d1597b78131720abb689e Reviewed-on: https://review.coreboot.org/c/coreboot/+/64691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-05-28payloads/external: Add support for coreDOOM payloadNicholas Chin
coreDOOM is a port of DOOM to libpayload, based on the doomgeneric source port. It renders the game to the coreboot linear framebuffer, and loads WAD files from CBFS. Tested with QEMU i440fx/q35 and a Dell Latitude E6400 using the libgfxinit provided linear framebuffer. Project page: https://github.com/nic3-14159/coreDOOM Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Change-Id: Ice0403b003a4b2717afee585f28303c2f5abea5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28mb/starlabs/lite/glk: Remove unnecessary DPTF UPDSean Rhodes
The default for DPTF is off (0), so remove the entry that sets this to off. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0397ff6f71766a2f738ab2b71be298ef8f2b1c9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-05-28mb/starlabs/lite/{glk/glkr}: Remove unnecessary parametersSean Rhodes
Since using FSP 2.2.0.0, the defaults match the required settings so they no longer need to be specified. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie0e00cae67cb89b184392e97b8ec196d45ea5d91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-28mb/google/brya/var/agah: Update USB-C port settingIvy Jian
Correct the USB-C port setting according to schematics. AP log: port C0 DISC req: usage 1 usb3 3 usb2 1 port C1 DISC req: usage 1 usb3 1 usb2 3 BUG=b:233554817 BRANCH=brya TEST=emerge-draco coreboot chromeos-bootimage Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: Iea4aee19dff8e0bc863be46532f89e81f52f281b Reviewed-on: https://review.coreboot.org/c/coreboot/+/64720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28mb/google/brya/var/mithrax: Update typeC EC mux portJohn Su
We need to put USB setting in mux order. BUG=b:234103724 TEST=Type C mux configuration is correct. Wrong: added type-c port0 info to cbmem: usb2:2 usb3:2 sbu:0 data:0 added type-c port1 info to cbmem: usb2:3 usb3:3 sbu:0 data:0 Correct: added type-c port0 info to cbmem: usb2:3 usb3:3 sbu:0 data:0 added type-c port1 info to cbmem: usb2:2 usb3:2 sbu:0 data:0 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I4f8dbee35159960d17107e23fcde825a38c7de4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/64721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28soc/intel/common: Use coreboot error codesSridhar Siricilla
The patch uses coreboot error codes instead of uint8_t data type in the pre_mem_debug_init function. TEST=build code for Gimble Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I957ff764900cb789bf2aacf0472dcb281f48af07 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2022-05-28mb/starlabs/labtop: Add LabTop Mk IIISean Rhodes
Tested using MrChromeBox's `uefipayload_202107` branch: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/labtop-mk-iii-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia52566e06f50c0abcfb657044538db8e92564c36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Ben McMillen <ben@starlabs.systems>
2022-05-28ec/starlabs/merlin/kbl: Add required headers for dead_code_tSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ia6c3ba80d5e6ac3d4fd8a935732ef7e32cf33998 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28Kconfig: Mark clang as ready to use on some archArthur Heymans
This adds 2 flags: * invisible opt-in flag for platforms on which clang seems to work * visible opt-in flag to allow experimenting Clang seems to work rather well on x86_32 so it makes sense to start adding that to Jenkins buildtesting, which this allows. This allows abuild to differentiate between targets that are known to build with clang. This makes buildtesting just those targets easier. Change-Id: I46f1bad59bda94f60f4a141237ede11f6eb93cc2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28arch/x86/tables.c: Increase MAX_SMBIOS_SIZEArthur Heymans
Systems have a lot more cores now and 4KiB is not cutting it. E.g. for a system with 255 cores more than 16KiB is needed. We could also make this a Kconfig parameter but it's probably not worth having such micro optimizations to save a few KiB. Change-Id: Idd47e55d8d679cc70eae996ee1af3ad7eaa1d0cc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-28arch/x86/smbios.c: Fix for CONFIG_MAX_CPUS > 255Arthur Heymans
Change-Id: I079c99006fea95ba3dc2fb02c95a3747af55e218 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-28cpu/x86/mp_init.c: Drop 'real' vs 'used' save stateArthur Heymans
Now that the save state size is handled properly inside the smm_loader there is no reason to make that distinction in the mp_init code anymore. Change-Id: Ia0002a33b6d0f792d8d78cf625fd7e830e3e50fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28cpu/x86/smm_module_load: Rewrite setup_stubArthur Heymans
This code was hard to read as it did too much and had a lot of state to keep track of. It also looks like the staggered entry points were first copied and only later the parameters of the first stub were filled in. This means that only the BSP stub is actually jumping to the permanent smihandler. On the APs the stub would jump to wherever c_handler happens to point to, which is likely 0. This effectively means that on APs it's likely easy to have arbitrary code execution in SMM which is a security problem. Change-Id: I42ef9d6a30f3039f25e2cde975086a1365ca4182 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28cpu/x86/smm_module_loader: Add a convenient ss_topArthur Heymans
We don't want to keep track of the real smm size all the time. As a bonus now ss_start is now really the start of the save state instead of top - MAX(stub_size, save state size). Change-Id: I0981022e6c0df110d4a342ff06b1a3332911e2b7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28cpu/x86/smm_module_loader.c: Rewrite setupArthur Heymans
This code is much easier to read if one does not have to keep track of mutable variables. This also fixes the alignment code on the TSEG smihandler setup code. It was aligning the code upwards instead of downwards which would cause it to encroach a part of the save state. Change-Id: I310a232ced2ab15064bff99a39a26f745239f6b9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28cpu/x86/smm: Drop 'entry' struct elementArthur Heymans
This is a duplicate of code_start. Change-Id: I38e8905e3ed940fb34280c939d6f2f1fce8480a7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-05-28cpu/x86/smm: Refactor creating a stub/save state mapArthur Heymans
This code was very hard to read so rewrite it using as few mutable local variables as possible. Tested on qemu with 128 cores. Change-Id: I7a455ba45a1c92533a8ecfd1aeecf34b4a63e409 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28mb/google/brya/var/volmar: Correct _PLD valuesWon Chung
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ C0 | | C1 | MLB DB | A0 | | +----------------+ BUG=b:216490477 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Ibd36fb961de9e9af9da1fd885eeb958c833d38bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/64618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28mb/google/brya/var/taniks: Correct _PLD valuesWon Chung
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ C0 | | C1 A | MLB DB | A | | +----------------+ BUG=b:216490477 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Ia66c6fafe08110b8d8f9a138a2516ae03f8e1809 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28mb/google/brya/var/{taeko, taeko4es}: Correct _PLD valuesWon Chung
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ C0 | | C1 A | MLB DB | A | | +----------------+ BUG=b:216490477 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Icd56c650a03c5db6e1e68e4ca4c9f0c068a7a430 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28mb/google/brya/var/{primus, primus4es}: Correct _PLD valuesWon Chung
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ C2 | | A0 C0 | MLB DB | A | | +----------------+ BUG=b:216490477 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Ia493fd28c362d2c0c343c2d121f6611cfd8f7f6c Reviewed-on: https://review.coreboot.org/c/coreboot/+/64615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28mb/google/brya/var/kano: Correct _PLD valuesWon Chung
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ C0 | | C1 | | A0 | | +----------------+ BUG=b:216490477 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: I840b0f363a1ff304b310505efdaba2ac1cd10472 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28mb/google/brya/var/felwinter: Correct _PLD valuesWon Chung
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ C2 | | C1 | MLB DB | A0 | | +----------------+ BUG=b:216490477 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Ie4f96e3636a8b519923fdba7f9bd07d7a3e1d7ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/64613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28mb/google/brya/var/{anahera, anahera4es}: Correct _PLD valuesWon Chung
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ A | | A C0 | MLB DB | C2 | | +----------------+ BUG=b:216490477 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Ia1e95aba2f7d02131b0b0cdd6c7211a23e355084 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28mb/google/brya/var/{brya0, brya4es}: Correct _PLD valuesWon Chung
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ C2 | | A0 C0 | MLB DB | C1 | | +----------------+ BUG=b:216490477 TEST=emerge-brya coreboot Signed-off-by: Won Chung <wonchung@google.com> Change-Id: I68fb940825bfcf7c77ca3015372025e47e7fcc41 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28commonlib/timestamp_serialized.h: Fix typosElyes Haouas
Change-Id: I245af182da5fe0869e834423959e1d040724157a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-05-28mb/google/brya/var/nissa: set tcc_offset value to 10Sumeet Pawnikar
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit (TCC) activation feature as mentioned in doc #572349. BUG=b:229804441 BRANCH=None TEST=Build FW and test on Nivviks board Change-Id: Ie9533936eccbabcc9a873adcb622bb490928c9e3 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-05-28soc/amd/sabrina/acpi/soc.asl: re-enable WAL1 call in PNOT methodFelix Held
Now that the FSP provides the ALIB ACPI table via a HOB, the PNOT power notify method can call WAL1 which will then call ALIB to communicate the current AC/DC state to the SMU. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic966b73aa28f329207f8d840ca5fb5f2bf6ec9b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64667 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28mb/google/skyrim: Update Kconfig to use Ti50Jon Murphy
Skyrim uses the Ti50 GSC and the config should be updated to reflect that. BUG=b:233750667 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I5d4af19ab2dda35ab687a0659898d79b08c4de97 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-05-28mb/starlabs/lite: Add Bluetooth USB interfaceSean Rhodes
Enable the USB port that is used by the Bluetooth interface on the CNVI. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I2a330618c5f1c5fd5e3147cb6307c157b28070ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/64545 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28mb/starlabs/lite: Remove webcam USB port from devicetreeSean Rhodes
Remove the Webcam USB port form the devicetree and handle it solely in devtree, which will enable or disable it based on the CMOS option. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I9c89c7103aca5c3d42215122e9d94c83947b6fee Reviewed-on: https://review.coreboot.org/c/coreboot/+/64544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28ec/starlabs/merlin/glk: Add Trackpad enable/disable Q eventsSean Rhodes
Add Q60 and Q61 events to disable or enable the trackpad. The support for this Q event was added in Star Labs EC version 1.11 Add Q events Q60 and Q61 which are bound to the F10 key. The event is select based on the value of 0x14, 0x11 will send Q60 and 0x22 will send Q61. Q60 will pull GPIO_177 to low, consequently disabling the trackpad and Q61 will reset it to the default configuration. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I091b0eb268d4d6d2109559765be71e2746b85f54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-28mb/starlite/lite: Configure tcc_offset based on power_profile settingsSean Rhodes
Set tcc_offset value based on the power_profile value, ranging from 5 to 15 degrees. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Id30bec9c095517884a7361226aed703b370f2207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-28soc/mediatek/mt8192: Enable thermal hardware resetRex-BC Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8192 Function Specification. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I98b062c2070384527624c3bcf0dfded25a2c8ce4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64676 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28soc/mediatek/mt8195: Enable thermal hardware resetRex-BC Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8195 Function Specification. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia6489bb953d148a43af173454d6f2b3e2a1dfcf9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64675 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28soc/mediatek/mt8186: Enable thermal hardware resetRunyang Chen
Under the current watchdog setting, the system will not reboot when the temperature is too high. To enable thermal hardware reset, we need to enable thermal control request and set it to reboot mode. Note that because thermal throttle (by lowering cpu frequency) is currently enabled, the thermal hardware reset shouldn't be triggered under normal circumstances. This feature is only for new hardware structure for thermal. Therefore, we only need to apply it on MT8192/MT8195/MT8186. This setting is based on thermal and watchdog section of MT8186 Function Specification. BUG=none TEST=emerge-corsola coreboot TEST=thermal hardware reset is working. Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: Id2ed55e6d4f4eec450bf7c849f726a389eeb6694 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64659 Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28vendorcode/amd/agesa: Remove -fno-zero-initialized-in-bssArthur Heymans
There are zero-initialized arrays within AGESA that were previously not declared with CONST qualifier. Without this flag, such arrays would have consumed valuable CAR space in romstage. After adding CONST qualifiers these arrays have actually moved to .rodata and removing the flag does not add anything to .bss. TEST: see that BUILD_TIMELESS=1 results in the same binary. Change-Id: I5b91deb1bf1b64bd9c88dc311db4e0b36df86c18 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64445 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28arch/x86/car.ld: Remove AGESA linker warning workaroundArthur Heymans
Now that all AGESA codebases have been fixed to not use the .data section, the warning workaround can be disabled. Change-Id: I675d169a5d2f16e1e9ae05f95e045e9ef3d12208 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28vendorcode/amd/agesa/fam16kb: Fix improper use of .dataArthur Heymans
AGESA has a lot of code in the .data section which is for initialized data, that in fact should be .rodata. This adds the 'CONST' keyword everywhere it is needed. TEST: See in the .elf file (e.g. using readelf) that there is nothing in .data section. Change-Id: Ie8817434ee0bc6c195eabe090f195512c0043ae5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-05-28vendorcode/amd/agesa/f14: Fix improper use of .dataArthur Heymans
AGESA has a lot of code in the .data section which is for initialized data, that in fact should be .rodata. This adds the 'CONST' keyword everywhere it is needed. TEST: See in the .elf file (e.g. using readelf) that there is nothing in .data section. Change-Id: I657d09f05070f5a88a4a162872c961db869a8df3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-05-28vendorcode/amd/agesa/f15tn: Fix all improper use of .dataArthur Heymans
AGESA has a lot of code in the .data section which is for initialized data, that in fact should be .rodata. This adds the 'CONST' keyword everywhere it is needed. TEST: See in the .elf file (e.g. using readelf) that there is nothing in .data section. Change-Id: I9593c24f764319f66a64715d91175f64edf10608 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2022-05-28drivers/i2c/cs35l53: Add device description and UIDVitaly Rodionov
BUG=b:207333035 BRANCH=none TEST=built and verified speaker Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com> Change-Id: I0dd39760dc5f44f46838c07d2e52946edc2a6d7e Reviewed-on: https://review.coreboot.org/c/coreboot/+/64638 Reviewed-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28mb/google/brya/var/vell: Set empty on USB2_9/USB32_1Shon
The baseboard uses port USB2 #9, and USB3 #1, but vell does not, therefore set the port configuration to EMPTY. Change-Id: I0d03b967fd2a051205ad5807f0bd8916bad7c036 Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-05-28mb/starlabs/lite/{glk/glkr}: Disable PMC PCI deviceSean Rhodes
The PMC is accessed via sideband registers, so the PCI device is not needed. Disabling it solves a bug where the laptop cannot be powered on without the charger connected. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I78f4aa4567dfc154ef5cb21f8746265259cd53e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64451 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28mb/starlabs/lite/{glk/glkr}: Disable DPTF deviceSean Rhodes
DPTF is not used, so disable the corresponding PCI device. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I9e4a3bada13dcabc1af3e1e5b3c215939f8239fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/64449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-05-28mb/starlabs/lite/{glk/glkr}: Remove subsystem device IDSean Rhodes
Remove the subsystem device ID for HDA devices, so that the correct Intel [8086:xxxx] is used. This was an old workaround for Windows that is no longer required with a new driver. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I63d6a4b0f19d400d683cab5dacca787d6c6a0fdc Reviewed-on: https://review.coreboot.org/c/coreboot/+/64448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-05-28mb/starlabs/lite/{glk/glkr}: Decrease S3 assertion time to 28 msSean Rhodes
Set S3 assertion time to 28000us as this is sufficient time for rails to discharge. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4a14e7b30bb1fc4c0c1d3ff2f75069863458487f Reviewed-on: https://review.coreboot.org/c/coreboot/+/64447 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-28mb/starlabs/lite/glkr: Correct OverCurrent PinSean Rhodes
The USB ports use both OC0 and OC1. Whilst they work perfectly with OC_SKIP, set them to the correct pins. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If173b443d9770083d76519b854b513d8e47b9e71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-05-28mb/starlabs/lite/glk: Correct OverCurrent PinSean Rhodes
The OC pin was set to 0, which isn't connected. All USB ports are connected to OC1. This solves a strange issue where the Lite can't be powered on without the charger connected. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I700ddde291f0e4be6e3787e2da13f6d3ece736b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-28soc/intel/tgl: Add PEG devices to PCI constraintsTim Crawford
Based on the constraints for CML. Fixes the following warnings in Linux on system76/oryp8 and system76/gaze16, which have an NVIDIA GPU on the bridge. pcieport 0000:00:01.0: can't derive routing for PCI INT A pcieport 0000:00:01.0: can't derive routing for PCI INT B This, in turn, resolves an IRQ conflict with the PCH HDA device that would cause a stack trace on every boot and on S3 suspend. irq 10: nobody cared (try booting with the "irqpoll" option) <snip> [<00000000fb84c354>] azx_interrupt [snd_hda_codec] Disabling IRQ #10 Change-Id: Ibc968aaa7bf0259879097ff69d2543dcfa2e5e4b Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-05-28mb/google/brask/variants/moli: correct empty tcss portRaihow Shi
Correct empty tcss port to meet Moli's schematic design. BUG=b:233834605 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Id16744655010e246c8ca8d1050f71a6c6c63d2a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-05-28mb/google/brya/var/banshee: Enable SaGvFrank Wu
Enable SaGv support for Banshee BUG=b:233930777, b:233703655 BRANCH=firmware-brya-14505.B TEST=FW_NAME=banshee emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I22810f422e3f1d6dd1f64d93e6d7aff5593ff739 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2022-05-28Treewide: Remove doxygen config files and targetsMartin Roth
In the last coreboot leadership meeting, the doxygen documentation was declared to be dead. Remove it. Doxygen style comments can still be added to files, and we may generate doxygen based documentation, but it won't be for the entire project, but instead just for those individual areas where it is being maintained. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I8983a20793786a18d2331763660842fea836aa2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/64228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-05-27Makefile.inc: Add bootblock to CBFS before othersYu-Ping Wu
With CBFS verification, cbfstool (CB:41121) needs bootblock to be present in coreboot.pre in order to locate the metadata hash stored in it. Therefore we have to ensure that bootblock is added to CBFS before other CBFS files are added. To solve the problem, create the 'add_bootblock' function, and call it in the coreboot.pre recipe. Because bootblock.bin is now a prerequisite of coreboot.pre, it will get built even if CONFIG_BOOTBLOCK_IN_CBFS=n. BUG=b:233263447 TEST=emerge-guybrush coreboot TEST=emerge-corsola coreboot chromeos-bootimage TEST=cbfstool image-kingler.bin print -v TEST=Kingler booted successfully BRANCH=none Change-Id: I385deb8231e44310ee139c3f69f449e75b92b2be Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-05-26soc/intel/alderlake: Hook up FSP hyper-threading setting to option APIFelix Singer
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting from the FSP to the option API so that related mainboards don't have to do that. Unless otherwise configured (e.g. the CMOS setting or overriden by the mainboard code), the value from the Kconfig setting `FSP_HYPERTHREADING` is used. Change-Id: I520a936b4c3a8997ba2c6bea0126b3bbcc5d68ce Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-05-26soc/intel/tigerlake: Hook up FSP hyper-threading setting to option APIFelix Singer
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting from the FSP to the option API so that related mainboards don't have to do that. Unless otherwise configured (e.g. the CMOS setting or overriden by the mainboard code), the value from the Kconfig setting `FSP_HYPERTHREADING` is used. Also, remove related code from the mainboard starlabs/laptop/tgl, since it is obsolete now. Change-Id: I49bbd4a776b4e6c55cb373bbf88a3ca076342e3e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-05-26soc/intel/cannonlake: Hook up FSP hyper-threading setting to option APIFelix Singer
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting from the FSP to the option API so that related mainboards don't have to do that. Unless otherwise configured (e.g. the CMOS setting or overriden by the mainboard code), the value from the Kconfig setting `FSP_HYPERTHREADING` is used. Also, remove related code from the following mainboards, since it is obsolete now. * siemens/chili * starlabs/laptop/cml Change-Id: I173b87da5ce76549672c50ba30204cd77be8b82f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-05-26soc/intel/skylake: Move FSP_HYPERTHREADING to common Intel KconfigFelix Singer
Move the Kconfig option `FSP_HYPERTHREADING` to common Intel Kconfig so that it can be reused by other SoCs. Since not all SoCs support hyperthreading, make it conditional on `HAVE_HYPERTHREADING`. SoCs supporting hyperthreading need to select it so that `FSP_HYPERTHREADING` is available. Change-Id: I892d48b488cbf828057f0e9be9edc4352c58bbe7 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2022-05-25mb/google/brask/variants/moli: enable USBA port 4Raihow Shi
Moli has USBA port4 but Brask didn't use the port4, so enable USBA port4 in moli. BUG=b:232656163 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I5308e3102ea9f0718802596a235c0a5cc42e30bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/64370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-05-25mb/google/brya/var/mithrax: Add WiFi SAR table for mithraxJohn Su
Add WiFi SAR table for mithrax. BUG=b:231491014 TEST=emerge-brya chromeos-config chromeos-config-bsp-private coreboot-private-files-baseboard-brya coreboot chromeos-bootimage and checked SAR table can load by WiFi driver. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I847debd7c817225b5b1777c798a14ef10aee3471 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-05-25mb/google/guybrush: Remove unused GPIO tableJon Murphy
On Guybrush, the power and lid switches are managed by the EC and coreboot and the AP have no control over them within this context. Remove unused GPIO's to prevent coreboot warnings about resampling at boot. BUG=b:233771033 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I1c68fce817a2a98ce0e8f1d9771d6c630dd5e88a Reviewed-on: https://review.coreboot.org/c/coreboot/+/64645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-05-25mb/google/skyrim: Update DDI descriptor for HDMIJon Murphy
The HDMI port was specified as a display port. Update to allow for testing of 4k streaming. BUG=b:229771029 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ib4dc8a5c6110630cea768f81e34fd7b0a5a62657 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-05-25mb/google/skyrim: Remove unused GPIO tableJon Murphy
On Skyrim, the power and lid switches are managed by the EC and coreboot and the AP have no control over them within this context. Remove unused GPIO's to prevent coreboot warnings about resampling at boot. BUG=b:233771163 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ie369bb7d430bd0dd1f1c1f41bf543a9b18e34db1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64644 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-25mb/google/guybrush: Remove unused sleep GPIO tableJon Murphy
On Guybrush, there wasn't a need for a sleep GPIO table. Remove the TODO and filler table and function to reduce unnecessary function calls/overhead. Missed changes to variant.h in initial commit(already merged) BUG=b:232952508 TEST=Builds Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Idba1a9eeea5ea5f5922281668ec17c4f065a654d Reviewed-on: https://review.coreboot.org/c/coreboot/+/64643 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-25soc/intel/common: Skip sending DISCONNECT IPC commandSridhar Siricilla
The patch skips sending DISCONNECT IPC command to PMC if system resumes from S3. coreboot notice DISCONNECT IPC command getting timedout during S3 resume if system has AC connected behind Type-C hub. This impacts system resume time. Please refer TA# 730910 for more information. coreboot need not send the DISCONNECT IPC command when system resumes from S3 state. TEST=Verified system boots to OS and verfied below tests on Gimble 1. coreboot doesn't send the DISCONNECT during S3 resume 2. After S3 resume, system detects the pen drive with Superspeed 3. After system resumes from S3, hot-plug the pen drive, system detects the pen drive 3. System sends IPC commands when system boots from S0 or S5. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I6ad006ae8677919c7dfeca8eec0af11454a2e89d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>