| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds new ISH PCI device IDs for Intel PTL-U and PTL-H.
Additionally, updates the ISH driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: I280cfdb50e8d453e957cb4bccff3a7ee2fb3bd10
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83505
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds new DID2 PCI device IDs for Intel PTL-U and PTL-H.
Additionally, updates the graphics driver's `pci_device_ids` list to
include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Iab499070c87e020e36901b4ea453a1893bd16ea0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83491
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds new DID0 PCI device IDs for Intel PTL-U and PTL-H.
Additionally, updates the System Agent driver's `systemagent_ids` list
to include these new IDs.
Source: Intel PTL-EDS vol 1. Document Number 815002, Rev 0.51 Chapter 2
BUG=b:347669091
TEST=Able to build google/fatcat.
Change-Id: Ie4d77eb489e16d18b996fdda3216e1275083d7e7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83490
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most x86 platforms use CMOS as the vboot nvdata (VBNV) backend storage.
On some platforms such as AMD, certain CMOS registers must be configured
before accessing the CMOS RAM which contains VBNV. More precisely,
according to AMD's spec [1], the bit 4 of Register A of CMOS is bank
selection. Since VBNV is accessed via bank 0 (see the MC146818 driver),
the bit must be cleared before the VBNV can be successfully written to
CMOS. Saving VBNV to CMOS may fail in verstage, if CMOS has lost power.
In that case, all the CMOS registers would contain garbage data.
Therefore, for AMD platforms the bit must be cleared in verstage, prior
to the first save_vbnv_cmos() call.
Introduce vbnv_platform_init_cmos(), which is no-op by default, and can
be defined per platform. The function will be called from vbnv_init() if
VBOOT_VBNV_CMOS.
[1] 48751_16h_bkdg.pdf
BUG=b:346716300
TEST=none
BRANCH=skyrim
Change-Id: Ic899a827bd6bb8ab1473f8c6c03b9fde96ea6823
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83494
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The cpu_cluster device is defined in the chipset devicetree. So drop it
from the mainboards.
Change-Id: Ib84e7804c03f1c0779ab7053a09e397a267a3844
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83523
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I30a98ae4989edc97d56d2b538930b3c67565d9dc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Set "option WIFI_SAR_ID_1 1" for WIFI_SAR_ID field in fw_config.
BUG=b:347108861
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I179dad5eeabc1d84aa0a2de5359be5848a2ecc39
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83478
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace integer literals with macros for CMOS addresses for readability.
Change-Id: I454662c90fabb41af864728febdefa57f5ff2cb2
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch removes `p2sb.c` from the bootblock build for the
Meteor Lake platform.
BUG=none
TEST=Builds successfully for google/rex.
Change-Id: Ib2beeee68bb20568888d4b555c2fa82e0bf0fd3c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch updates Tiger Lake code to use the common eSPI header file
(`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for google/volteer.
Change-Id: I01eca0ab132b1788c4633d0e214d4dfde25f5b98
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83488
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates Meteor Lake code to use the common eSPI header
file(`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for google/rex.
Change-Id: Ibb37413bb6c925650f55b0dcf70e7483bf257888
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch updates Jasper Lake code to use the common eSPI header
file (`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for google/dedede.
Change-Id: I93dcd26588111d848be1580220945687890ef3b8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch updates Elkhart Lake code to use the common eSPI header
file(`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for Intel Elkhartlake platform.
Change-Id: Iaef308ad1c8ecfb11448e75f39285a2170bbc49c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83485
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates Alder Lake code to use the common eSPI header file
(`intelpch/espi.h`) instead of the SoC-specific one.
BUG=none
TEST=Builds successfully for google/redrix.
Change-Id: Ib4452547325042de48ee4fca3d3910a031b56b64
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83484
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch moves the SoC-specific `eSPI.h` file into the IA common
code to promote code reuse and reduce duplication across different
SoC generations.
TEST=Builds successfully for google/rex.
Change-Id: Icb09421eec45c1ef8ab50252543b000078f18b21
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Replace the SoC-specific `report_cache_info()` function with the
common `car_report_cache_info()` API from `car_lib`. This promotes code
reuse and reduces SoC-specific implementation for cache reporting.
BUG=none
TEST=Builds and boots successfully on google/rex platform.
Change-Id: Id5ffcab54232294ffa101f975d0ec51ac63f1910
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Replace the SoC-specific `report_cache_info()` function with the
common `car_report_cache_info()` API from `car_lib`. This promotes code
reuse and reduces SoC-specific implementation for cache reporting.
BUG=none
TEST=Builds and boots successfully on google/marasov platform.
Change-Id: I18be2c33dbe5186643af52823eb2fb185a296909
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83481
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds `car_lib.c` to the IA common code to consolidate
SoC-agnostic CAR APIs. Initially, it includes `car_report_cache_info()`
to provide a unified way to read cache information, reducing the need
for SoC-specific implementations.
TEST=Builds successfully for google/rex.
Change-Id: I2ff84b27736057d19d4ec68c9afcb9b22e778f55
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change removes the condition that
SOC_INTEL_METEORLAKE_SIGN_OF_LIFE is only enabled for x86_32 arch.
Now, it is safe to enable eSOL for x86_64 platform as well.
BUG=b:346682156
TEST=Able to see eSOL on google/rex64.
Change-Id: I825c988800ec303a8f37141f6487115b1c7c5d3a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83498
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds the necessary Kconfig options to enable support for
the TRULO board, including selecting the appropriate baseboard,
HDA verb table, and TCSS configuration.
Additionally, corrected the TPM_TIS_ACPI_INTERRUPT from `13` to `17`
for Trulo as applicable.
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: I5c1cbd56cf2734058aced35868ae42c1c160f62e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83500
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds hda_verb.c to the ramstage build, but only when the
CONFIG_SOC_INTEL_COMMON_BLOCK_HDA_VERB config option is enabled.
BUG=b:351976770
TEST=Able to build google/trulo.
Change-Id: I9b17126ff1493b5714d6ae715ad2863bdff4ed46
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83499
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch sets a default value of 13 (GPE0_DW0_13/GPP_A13_IRQ) for
the `TPM_TIS_ACPI_INTERRUPT` configuration option across most Google
Brya variants. The HADES board uses interrupt 20 (GPE0_DW0_20/
GPP_A20_IRQ), and the ORISA board uses interrupt 17 (GPE0_DW0_17/
GPP_A17_IRQ).
This refactoring simplifies future additions of board-specific TPM
interrupt configurations, improving maintainability.
BUG=none
TEST=The timeless builds with this patch for both Nissa and Brya
devices produce the same binaries.
Change-Id: I9d913bf3da6957ab5c700dd746bc4b5350427d73
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83493
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fixes a pmc_mux port mapping error introduced in coreboot
commit 4fa8354
Mithrax and felwinter do not have sequential mux_conn[X] to connY
mappings which led to the kernel subsystem linking between Type C
connectors and USB muxes to be incorrect. The previous patch
attempted to fix this by changing the custom_pld layout. However
this broke USB usage except for charging.
This patch reverts the custom_pld layout and instead changes the pmc
hidden and tcss_xhci port mappings to match the hardware layout.
BUG=b:352512335 b:329657774 b:121287022 b:321051330 b:204230406
TEST=emerge-${BOARD} coreboot
TEST=Manually check that usb-role-switches are mapped to the correct
port.
Attach USB 3 A to C cable from development machine to left port of
DUT.
Attach nothing to right-hand port.
ectool commands below are only for felwinter as a workaround for
devices without a firmware patch to connect superspeed lines.
ectool usbpd 0 none
ectool usbpd 0 usb
ectool usbpd 1 none
ectool usbpd 1 usb
echo host > /sys/class/typec/port0/usb-role-switch/role (should
succeed)
ls -l /sys/class/typec/port0/usb-role-switch (note CONX-role-switch)
echo host > /sys/class/usb_role/CONX-role-switch/role (should succeed)
echo host > /sys/class/typec/port1/usb-role-switch/role (should fail
as no cable attached)
ls -l /sys/class/typec/port1/usb-role-switch (note CONY-role-switch)
echo host > /sys/class/usb_role/CONY-role-switch/role (should fail
as no cable attached)
BRANCH=firmware-brya-14505.B
Change-Id: Iebd259842d3affa259069cd776b46759c1c60712
Signed-off-by: Emilie Roberts <hadrosaur@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83472
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new eventLog type of ELOG_TYPE_FW_LATE_SOL to support logging
when we show late (from payload) Signs Of Life (SOL) to the user.
BUG=b:305898363
TEST=Event shows in eventlog tool after CSE sync:
```
Late Sign of Life | CSE Sync Late SOL Screen Shown
```
Change-Id: Ibbe9f37a791e5c2a0c6e982942cf3043a2bd4b45
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
The 'Radio Frequency Interference Mitigation' DSM function 11
provides the desired status of the RFI mitigation.
The implementation follows document 559910 Intel Connectivity
Platforms BIOS Guideline revision 8.3 specification.
BUG=b:352768410
TEST=ACPI DSM Function 11 reflects the value of the SAR binary
Change-Id: I02808b0ce6a0a380845612e774e326c698ad1adc
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The 'Energy Detection Threshold' DSM function 10 provides the desired
status of the EDT optimizations.
The implementation follows document 559910 Intel Connectivity
Platforms BIOS Guideline revision 8.3 specification.
BUG=b:352788465
TEST=ACPI DSM Function 10 reflects the value of the SAR binary
Change-Id: I2e2e9d4f5420020bd7540cb36fa8aebfedf62285
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
The UEFI reference firmware uses AMDI0030 instead of AMD0030 as HID for
the GPIO controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a6fa1acdca0ee5b6e1358b6279b7c501d3dfd16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The UEFI reference firmware uses AMDI0030 instead of AMD0030 as HID for
the GPIO controller.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8dd48d7d9cf3f6d75853bb825e5ddc32bba430b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The table "IOMUX Functional Table" in PPR #57254 rev. 1.60 was used as a
reference. This should fix the ESPI_ALERT_D1 IOMUX setting for the
boards using the Glinda SoC which previously didn't match the hardware.
Compared to Phoenix, Glinda has two more chip select outputs for the
SPI2 controller and an additional ZST_STUTTER_RAIL IOMUX function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id9adfbe0c7aee90d6fe990f239d82a1d013e7f5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83437
Reviewed-by: Anand Vaikar <a.vaikar2021@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Also set the vendor default TCC offset temperature
Change-Id: Ia187b67ae28fbcda7d5d0e35ec64a3b21d97a21b
Signed-off-by: Anastasios Koutian <akoutian2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested on ThinkPad T420 with the i7-3940XM.
Change-Id: I1c65a129478e8ac2c4f66eb3c6aa2507358f82ad
Signed-off-by: Anastasios Koutian <akoutian2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Setting the clamp bit allows the CPU to operate below the highest
non-turbo frequency in order to obey the power limit.
Tested on ThinkPad T420 with the i7-3940XM.
Change-Id: Id0c0aedc29aca121d0fd1d8f8826089e13a026be
Signed-off-by: Anastasios Koutian <akoutian2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Make use of the alias names defined in the chipset devicetree and remove
devices which are equal to the ones from the chipset devicetree.
Change-Id: Ifc882c2ac9d4e9ce2ed4305bdd6859a5d1e1b09c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
In order to clean up a bit, drop devices which are equivalent to the
ones from chipset devicetree.
Change-Id: Ief199db47fc529c510709ac37be6014b63244e84
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The cpu_cluster device is defined in the chipset devicetree. So drop it
from the mainboards.
Change-Id: I65bfeaf0b8771c123c0615531c2cc608b222949b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83440
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Several brya variants were missing VBT files, add and select them in
Kconfig.
Also select in Kconfig for VELL, which already had a VBT but was not
using/selecting it.
TEST=build/boot google/brya (marasov), verify display init functional
/ payload screen shown.
Change-Id: I6848c2b78cf37157299d94bf12c0b6d925ea1432
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83434
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Eliminates the use of a magic number, and the resulting DID entry in
the _DOD method is the same. The first entry was already changed in
commit 1810a1841528 ("mb/google/*: Replace use of gfx/generic addr
field with display type"), this one was missed.
TEST=build/boot google/jinlon w/o privacy screen, dump SSDT and verify
DID entry is unchanged but _ADR is now correct (since the DID flags are
not part of the address field).
Change-Id: Ief22928ea831d4cb5b483406ac388218a97ad98b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Make use of the alias names defined in the chipset devicetree and remove
devices which are equal to the ones from the chipset devicetree.
Change-Id: Iebe5f8729d463767f5a1b52c375d11bb9d413144
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Make use of the alias names defined in the chipset devicetree and remove
devices which are equal to the ones from the chipset devicetree.
Change-Id: I4769f255ce5652a9969ad6535c997ec1ad0be8d2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Make use of the alias names defined in the chipset devicetree and remove
devices which are equal to the ones from the chipset devicetree.
Change-Id: Ic33bf07041a8c966dce66109c577621513147609
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78838
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make use of the alias names defined in the chipset devicetree and remove
devices which are equal to the ones from the chipset devicetree.
Change-Id: Ide536c74683416b34b0984fe1bddb250e72b045b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Make use of the alias names defined in the chipset devicetree and remove
devices which are equal to the ones from the chipset devicetree.
Change-Id: Id3605e8e05d9d97a73af966459692276265df8bc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78836
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make use of the alias names defined in the chipset devicetree and remove
devices which are equal to the ones from the chipset devicetree.
Change-Id: I2b0e19581e0f0111a56bc57185acfcdd70588141
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78835
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make use of the alias names defined in the chipset devicetree and remove
devices which are equal to the ones from the chipset devicetree.
Change-Id: I290fcfdd7b2cff61c4f6cd153133c5205c6fd6d1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Issue: System hang occurred due to unhandled SPI synchronous SMI,
triggered by LOCK_ENABLE bit and WPD assertion.
Solution: Enabled SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE configuration
to allow the system to handle and clear SPI synchronous SMI.
BUG=b:350623902
TEST=reboot test on 40 google/xol by ODM, all passed w/o
hang.
Change-Id: I4c14b1e3d537e46e671e950c91c9d0042fe26836
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83432
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: SH Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-by: Edward Doan <edoan@chromium.org>
|
|
Fan control is assign to EC handle now. Remove relate setting on coreboot.
BUG=b:351917517
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: Iff0776ce3db6f27e250162357abb3c7e9b1a0dc3
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83380
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I1ffa87eeee521180f37371e5a0d1f9a1a06091aa
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83373
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|
|
This patch extends the crashlog IP support beyond 32-bit mode to
support Intel future generation SoCs, which may require crashlog
support for 64-bit architectures. uintptr_t data type is used for
Address pointers and void* for dereferencing
BUG=b:346676856
TEST=Successfully built Meteor Lake (rex) and tested for google/rex0
and google/rex64 images.
Change-Id: I552257d3770abb409e2dcd8a13392506b5e7feb7
Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83106
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds FW_CONFIG to accommodate different Lotso BoM
components across various SKUs.
1. Fingerprint sensor - FP Present/Absent
BUG=b:350360162
BRANCH=None
TEST=Boot image on SKU2 and check FP working.
Change-Id: I1ee5fcd1c29099bdbee741ef76c00cf45fcc1189
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83388
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
This commit also updates the USB2 port 10 description and set its type
to the more appropriate `UPC_TYPE_INTERNAL' type.
BUG=b:348345301
TEST=BRDS method is added to the CNVW device and returns the data
supplied by the SAR binary blob
Change-Id: I66c9b75d2aaa1b221313b037defcd2c579fd6b61
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices,
this is used for the first boot in factory.
2. Add fw_config probe to enable/disable devices in devicetree
instead of variant.c, it can avoid suspend(s0ix) fail issue.
BUG=b:328580882
TEST=On riven eMMC and UFS SKUs, boot to OS and run
`suspend_stress_test -c 10` pass.
Change-Id: I518f1a5955fb88f304663112f1e3d4c744bde183
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83405
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bujia does not support Thunderbolt anymore,
therefore disable related TBT setting.
The bujia fit image CL, cf. chrome-internal:7468938.
BUG=b:349923139
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot.
Change-Id: I4301a1f744aa9d4de9f0eba4147c49a4bb3ed922
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83402
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The CMOS entry for CSE partition firmware was incorrectly labeled as
`ramtop` and `partition firmware` in the error messages.
This patch corrects the messages to accurately refer to `CSE partition
firmware`.
Additionally, the alignment and size check comments are updated to
reflect this change.
Change-Id: Ib3a7fb88f52c4d0c47d828bcd1c4649e62d19654
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This patch ensures CSE boot partition (RO/RW) version information only
log when the status is "success". If the status is not successful,
log an error message indicating the failure and status code.
This change avoids logging potentially incorrect version information
when the boot partition is not valid.
BUG=b:305898363
TEST=Builds successfully for google/rex variants.
Change-Id: I1932302b145326a1131d64b04af1cbfd6d050b7b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch refactors CSE config options, moving the selection of:
* `SOC_INTEL_CSE_LITE_SKU`
* `SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY_V2`
* `SOC_INTEL_CSE_SEND_EOP_ASYNC`
from the generic `BOARD_GOOGLE_REX_COMMON` to individual board models.
This enables finer-grained control over CSE features and sync behavior
on different Rex and variants platforms.
Specifically:
* `google/rex0`: Selects `SOC_INTEL_CSE_LITE_SKU` for CSE sync within
coreboot.
* `google/rex64`: Selects `SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD` and
`SOC_INTEL_CSE_SEND_EOP_BY_PAYLOAD` to defer CSE sync
to the payload.
BUG=b:305898363
TEST=Builds successfully for google/rex variants.
Change-Id: Ib5957496b1e1dad8d135b3e10541cb83dd339539
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83397
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes the selection of `SOC_INTEL_CSE_LITE_PSR` conditional
on both `MAINBOARD_HAS_CHROMEOS` and `SOC_INTEL_CSE_LITE_SKU` being
enabled.
This ensures that CSE Lite PSR is only active when both ChromeOS is the
target platform and CSE sync is performed inside coreboot.
BUG=b:305898363
TEST=Able to build google/rex.
Change-Id: I7199c034bbe6e7f077650417da67fa544f0b49d5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83396
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify the dependencies for `SOC_INTEL_CSE_RW_UPDATE` and
`ME_REGION_ALLOW_CPU_READ_ACCESS` config options to include
`SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD`.
This allows these features to be enabled even when CSE sync is performed
in the payload, not just within coreboot (when `SOC_INTEL_CSE_LITE_SKU`
config is enabled).
BUG=b:305898363
TEST=Builds and boots successfully:
* google/rex0 with SOC_INTEL_CSE_LITE_SKU
* google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD
Change-Id: Id6ec19d74237f278e8383c89923523871b2cc2db
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch updates FSP-M UPDs conditionally to ensure CSE firmware
updates and VGA initialization control only when
`SOC_INTEL_CSE_LITE_SKU` config is enabled.
This ensures eSOL rendering is tied to CSE sync performed in coreboot,
preventing unnecessary setup when sync is deferred to the payload.
Deferring CSE sync to the payload results in the depthcharge screen.
BUG=b:305898363
TEST=Builds and boots successfully:
* google/rex0 with SOC_INTEL_CSE_LITE_SKU
* google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD
Change-Id: Iffdd4b1be4abba8c57e28542058a575cc6de674c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch refactors the handling of CSE CBMEM IDs to enable platforms
to choose whether to perform CSE sync operations within coreboot or
defer it to the payload. This separation improves code organization,
ensuring `cse_lite.c` focuses on coreboot-specific CSE Lite tasks.
Now, platforms can select:
* `SOC_INTEL_CSE_LITE_SKU` for CSE sync within coreboot
* `SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD` for deferred payload sync
This change ensures mutually exclusive options, avoiding unnecessary
SPI flash size increases.
BUG=b:305898363
TEST=Builds and boots successfully:
* google/rex0 with SOC_INTEL_CSE_LITE_SKU
* google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD
Change-Id: I74f70959715f9fd6d4d298faf310592874cc35d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83393
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard is identified as 0Y2MRG.
The version tested is with Nvidia dGPU (gfx 560ti).
The flash is a 4MiB Winbond W25Q32BVSIG.
It can be flashed internally with flashrom.
Add a strap on the service mode pin of the mainboard for internal flash.
Tested working:
- SeaBIOS
- All USB ports
- SATA
- dGPU
- Ethernet
- Environment control
- GPIOs
- S3 Sleep mode
- WakeOnLan
Change-Id: I7d394794fec580bc7aed3f6396ceb47d4a6fd059
Signed-off-by: Ronald Claveau <sousmangoosta@aliel.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
A previous commit splits out Cirrus display support from Bochs display
support, with both using the pre-existing Bochs config options for the
requested display resolution. Rename these config names to clarify they
are not only specific to the Bochs display driver.
Change-Id: Ie0a5e75731231bb768d7728867196c9ab5c53a00
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
QEMU's Cirrus display device is supported along with the Bochs driver
since commit 7905f9254ebc ("qemu: cirrus native video init"). It is no
longer the default since QEMU 2.2. The code supporting it can work
independently of the Bochs display driver and depends more heavily on
port I/O and VGA support code, so split it from that code to make it
easier to support the Bochs driver in other architectures.
Change-Id: Ic9492b501ed4fdcbda6886db60b1e5348715e667
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Define the PCI I/O base address necessary to use port I/O functions on
the qemu-aarch64 mainboard, so that we can get the VGA display devices
working. The config value is from hw/arm/virt.c [1]:
[VIRT_PCIE_PIO] = { 0x3eff0000, 0x00010000 },
[1] https://gitlab.com/qemu-project/qemu/-/blob/v8.2.3/hw/arm/virt.c#L164
Change-Id: I85439ba68740d64f789983b37d9c95f849ce4f72
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82059
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allows to use this driver for the SMBus console without sending an index
byte for every sent char (i.e. !CONSOLE_I2C_SMBUS_HAVE_DATA_REGISTER).
Tested with WiP VIA CX700-M2 port and FT4222H as receiver.
Change-Id: Ic368ef379039b104064c9a91474b188646388dd2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82763
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The APOB NV size/base are embedded into the amdfw binary and read by
the PSP. These need to be synchronized with the FMAP region used by
coreboot to store the APOB data. soc_update_apob_cache() will only
use RECOVERY_MRC_CACHE if supported and if vboot is enabled, so the
NV base passed to the PSP needs to reflect that as well.
This fixes the issue of RAM training running on every boot on
non-vboot builds for Myst boards.
TEST=untested, but same change as made for Mendocino
Change-Id: Ib4a78a39badf0a067e22eebe5869e5ea51723f35
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The APOB NV size/base are embedded into the amdfw binary and read by
the PSP. These need to be synchronized with the FMAP region used by
coreboot to store the APOB data. soc_update_apob_cache() will only
use RECOVERY_MRC_CACHE if supported and if vboot is enabled, so the
NV base passed to the PSP needs to reflect that as well.
This fixes the issue of RAM training running on every boot on
non-vboot builds for Skyrim boards.
TEST=build/boot Skyrim (Frostflow), verify RAM training only
run on first boot after flashing.
Change-Id: I9be1699d675331b46ee9c42570700c2b72588025
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83400
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Not every I2C target requires a register address. Not sending one
for every console char saves us a lot of overhead.
Change-Id: I1c714768fdd4aea4885e40a85d21fa42414ce32c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82762
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie44fdac6904a4467e408882bb8a5e08e6ff73f32
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82761
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib757c0548f6f643747ba8d70228b3d6dfa5182cd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82752
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bujia has 4 thermal sensors, so add two missing sensors settings.
BUG=b:351917517
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot.
check ACPI SSDT table have new TSR info.
$ cat /sys/firmware/acpi/tables/SSDT > SSDT
$ iasl -d SSDT
check SSDT.dsl
Change-Id: Id9a17a22a717faac829e6b5e300351187a62dd43
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
TSEG_SZ_MASK is already defined in "q35.h"
Change-Id: I32ea08c18e1c41d16137ea14a1643f8c8d527722
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83386
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ucsi_enabled flag is no longer used by the EC. Update coreboot to only use only EC_FEATURE_UCSI_PPM to determine whether UCSI is enabled.
BUG=b:319124515
TEST=emerge-brox coreboot chromeos-bootimage
Cq-Depend: chromium:5664227
Change-Id: Ia9d820c637e56a527fd90f45b1848158a960dee7
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83252
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This board has a DVI-I connector, which supports both digital and analog
display outputs. The I2C bus to retrieve the EDID is shared between both
outputs, so `select GFX_GMA_ANALOG_I2C_HDMI_B` to describe this.
Can't currently test this due to lack of hardware.
Change-Id: Ib8239917e2f7ee5bb982621752ec406c2d3ca302
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82753
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The Chrome EC currently supports two ways to read battery strings on
ACPI platforms:
* Read up to 8 bytes from EC shared memory BMFG, BMOD, ...
* Send a EC_CMD_BATTERY_GET_STATIC host command and read strings from
the response. This is assumed to be exclusively controlled by the OS,
because host commands' use of buffers is prone to race conditions.
To support readout of longer strings via ACPI mechanisms, this change
adds support for EC_ACPI_MEM_STRINGS_FIFO (https://crrev.com/c/5581473)
and allows ACPI firmware to read strings of arbitrary length (currently
limited to 64 characters in the implementation) from the EC and to
determine whether this function is supported by the EC (falling back to
shared memory if not).
BUG=b:339171261
TEST=on yaviks, the EC console logs FIFO readout messages when used in
ACPI and correct strings are shown in the OS. If EC support is
removed, correct strings are still shown in the OS.
BRANCH=nissa
Change-Id: Ia29cacb7d86402490f9ac458f0be50e3f2192b04
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Tested on ThinkPad T420 with the i7-3940XM.
Change-Id: I064af25ec4805fae755eea52c4c9c6d4386c0aee
Signed-off-by: Anastasios Koutian <akoutian2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
update DTT settings for thermal control,according to b:348285763#comment6.
BUG=b:348285763
TEST=emerge-brox coreboot
Change-Id: I67e16a2596884d501273a5787119406dff7a20f9
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83304
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Orisa uses PDC<->PMC direct connection for USBC mux configuration.
Select SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION to enable it.
BUG=b:345070027
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I3f740bedc8ff667d15f077fa57d201ab0d42ebf8
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83324
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
Add a new fw config field to determine which firmware edition shall be
flashed to the PDC.
BUG=b:334793686
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I817e9415aca1d2f68b484d8e23b581e1a75d6f84
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83353
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I110cc95d536cb0fd3b5db85b84cca7a96e31401c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83253
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SKU1 is UFS, SKU2 is NON-UFS, it needs to select this config to disable
the MPHY clock in the SKU2 configuration to ensure that S0ix functions
normally.
BUG=b:350609955
BRANCH=None
TEST=Boot image on SKU1/SKU2 and check S0ix working.
Change-Id: I2fbcc7ffaabf3c085a3345ec94a8d45b225b3450
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the PCI_DEVFN macro to make the calculation of the ivhd->device_id
value a bit clearer.
TEST=Timeless build results in identical binary for Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b7949ad3524790e7d7d527c488a32e785f55bc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83343
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add hid report address for gt7986u.
BUG=b:342932183
BRANCH=None
TEST=Verify touchscreen work normal.
Change-Id: I464c2691505083314528519f608108c8a31e6cc0
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83201
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update generic property list for build test result fail
https://qa.coreboot.org/job/coreboot-gerrit/259702/
BUG=b:342932183
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: Iecd8573343706184dce5edfc12fe7a143390e0e9
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83301
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
|
|
This patch creates a new domika variant which is a Twin Lake platform.
This variant uses Yavilla board mounted with the Twin Lake SOC and hence
the plan is to reuse the existing yavilla code.
BUG=b:350399367
BRANCH=firmware-nissa-15217.B
TEST=build, and boot into OS
Change-Id: I42c56770f8b8d6018592253d2bb16b8166eb5719
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Disable VBOOT_EARLY_EC_SYNC for all trulo boards.
BUG=b:345112878
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I10b027d19dedbb190fc960b949017f9e4830d52a
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83303
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Domain device objects are created with HID/CID/UID/_OSC/_PXM
Dynamic domain SSDT generation could benefit the support of SoCs with
multiple SKUs, or the case where one set of codes supports multiple
SoCs. One possible side-effect might be the extra performance cost for
generating these tables, which should not bring big impact on high
performance server CPUs.
GNR codes run with dynamic domain SSDT generation to fit for both
GraniteRapids and SierraForest SoCs.
TEST=Build on intel/avenuecity CRB
TEST=Build on intel/beechnutcity CRB
Change-Id: I28bfdf74d8044235f79f67d832860d8b4306670c
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This is a rudimentary port of this board. It was done with Haswell
Autoport, wherein some adjustments for Broadwell were made
(Thanks to Angel Pons!).
The VBT was copied from /sys/kernel/debug/dri/1/i915_vbt on version
2.20 of the vendor firmware.
Working:
- Broadwell MRC.bin
- S3 suspend and resume
- All DIMM slots
- Libgfxinit
- HDMI-Out Port
- DVI-I Port (including passive DVI to VGA adapter)
- USB 2.0 Ports
- USB 3.1 Gen1
- RJ-45 LAN Port
- SATA3 6.0 Gb/s Connectors
- m.2 PCIe SSD
- mPCIe WiFi slot
- x16 PCIe slot
- USB 3.1 Gen1 Header
- Front Panel Audio Connector
- edk2
Not yet tested:
- SATA Express 10 Gb/s Connector
- HDMI-In Port
- DisplayPort 1.2
- Optical SPDIF Out Port
- PS/2 Mouse/Keyboard Port
- USB 2.0 Headers
Not working:
- Broadwell CPUs, see commit f5105313cf69 (mb/asrock/z97_extreme6:
Add new mainboard)
Special thanks to Angel Pons for guiding me through the process of
porting this board and pushing it to Gerrit!
Change-Id: I3b940e9281814e8360900221714c0dfa3ae39540
Signed-off-by: Jan Philipp Groß <jeangrande@mailbox.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82760
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:348345301
BRANCH=firmware-rex-15709.B
TEST=BRDS method is added to the CNVW device and return the data
supplied by the SAR binary blob
Change-Id: I7f56ab8ac88c1fbc0b223b4286d2a998e424a46e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83299
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for the configuration of 320MHz Bandwidth per MCC based on
countries. The implementation follows document #559910 Intel
Connectivity Platforms BIOS Guidelines revision 8.3.
BUG=b:333804562
BRANCH=firmware-rex-15709.B
TEST=WBEM method is added to the CNVW device and return the data
supplied by the SAR binary blob
Change-Id: Ie76794825f1a0104d199c078aa4ffc714aa95b17
Signed-off-by: Poornima Tom <poornima.tom@intel.com>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81790
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The 'Bluetooth Increased Power Mode - SAR Limitation' feature provides
ability to utilize increased device Transmit power capability for
Bluetooth applications in coordination with Wi-Fi adhering to product
SAR limit when Bluetooth and Wi-Fi run together.
This commit introduces a `bluetooth_companion' field to the generic
Wi-Fi drivers chip data. This field can be set in the board design
device tree to supply the bluetooth device for which the BRDS function
must be created.
This feature is required for Meteor Lake rex karis variant.
The implementation follows document 559910 Intel Connectivity
Platforms BIOS Guideline revision 8.3 specification.
BUG=b:348345301
BRANCH=firmware-rex-15709.B
TEST=BRDS method is added to the CNVW device and return the data
supplied by the SAR binary blob
Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e209
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83200
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This port was done via autoport and subsequent manual tweaking.
Thanks to Angel Pons for helping me with the misbehaving ASM1061 ASPM!
The board features two socketed DIP-8 SPI flash chips, as well as a
BIOS selection via jumper and onboard Power and Reset switches.
Working:
- Haswell MRC.bin
- All four DDR3/DDR3L DIMM slots
- S3 suspend and resume
- Libgfxinit
- HDMI-Out Port
- both RJ-45 Gigabit LAN Ports
- USB 2.0 Ports
- USB 3.1 Gen1 Ports
- both USB 3.1 Gen1 headers
- HD Audio Jack (audio output)
- all six SATA3 6.0 Gb/s connectors by Intel
- all four SATA3 6.0 Gb/s connectors by ASMedia ASM1061
- all three PCI Express 3.0 x16 slots
- PCI Express 2.0 x1 slot
- half mini-PCI Express slot
Working (board-specific)
- Power Switch with LED (functional, yet no LED)
- Reset Switch with LED (functional, yet no LED)
- BIOS Selection via jumper
not (yet) tested:
- IR header
- COM Port header
- DisplayPort
- eSATA connector
- USB 2.0 headers
- PS/2 Mouse/Keyboard Port
- HDMI-In Port
- PCI slots
not (yet) working:
- Front panel audio connector
- Software fan control: While the Nuvoton chip is correctly discovered,
the numbering of the fan connectors is faulty, resulting in the wrong
fan being controlled.
- Dr. Debug: on vendor firmware, the LEDs turn off after successful
boot. On coreboot, the LED shows two bright zeros after boot.
Change-Id: Iae0b73d8e81be90ec3a2d5463df3ed170f603266
Signed-off-by: Jan Philipp Groß <jeangrande@mailbox.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Use FW_CONFIG to differentiate MAX98390 and TAS2563. Since config
GERALT_USE_MAX98390 is no longer needed after using FW_CONFIG,
we remove GERALT_USE_MAX98390 from Kconfig.
BUG=b:345629159
BRANCH=none
TEST=emerge-GERALT coreboot
TEST=Verify beep function through deploy in depthcharge successfully.
Change-Id: Ie9f0cbc30dd950b85581fc1924fa351efe1e0aab
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add RAM ID for
K3KL9L90CM-MGCT 0 (0000)
BUG=b:320203629
BRANCH=firmware-rex-15709.B
TEST=Run part_id_gen tool without any errors
Change-Id: Icb84838a6964b9318ded0573ad58a4fd1221867f
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83300
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Before:
I2C0 - 401kHz
I2C4 - 405kHz
After:
I2C0 - 392kHz
I2C4 - 395kHz
HW: Change R8409/R8411 to 33ohm.
BUG=b:349743464,b:349735055
TEST=emerge-brox sys-boot/coreboot
Test pass by EE
Change-Id: I985837b1b80e973f148529b446905580c0f95e98
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83290
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
|
|
Fast boot will used pre-saved hardware configuration data to
accelerate the boot process, e.g. DDR training is skipped by using
pre-saved training data. Enable fast boot on cold and warm resets
by default.
Change-Id: Ib5dc76176b16ea1be5dd9b05a375c9179411f590
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
If BMP_LOGO is set, currently display_init_required() will always return
1, so that platform code will always initialize display. However, that
information isn't passed to vboot, which may result in unnecessary extra
reboots, for example when the payload needs to request display init (by
vb2api_need_reboot_for_display()).
Since there is already a Kconfig option VBOOT_ALWAYS_ENABLE_DISPLAY to
tell vboot that "display is available on this boot", enable it by
default if BMP_LOGO is set.
BUG=b:345085042
TEST=none
BRANCH=none
Change-Id: I20113ec464aa036d0498dedb50f0e82cb677ae93
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Working:
- Both DIMM slots
- All Rear USB 2.0 ports
- Integrated graphics (libgfxinit)
- Realtek RTL8111F GbE
- Flashing internally with flashrom (Note: Works from stock too
due to Gigabyte not following Intel recommendations,
confusing ME)
- SeaBIOS (1.16.3) to boot Arch Linux Installer
- EDK II (uefipayload_202309, MrChromebox) to boot Arch Linux Installer
- Audio output (green jack, rear)
- S3 suspend/resume
- VBT
Untested for now (i.e. should work, will eventually test):
- EHCI debug
- Front USB 2.0 ports
- The other audio jacks
- PCIe ports
- Non-Linux OSes
Untestable (i.e. cannot test due to unavailable hardware):
- PS/2 port
- Serial port
- SATA ports
Not working:
- USB 3.0 ports: The on-board VLI VL805 does not have a flash chip,
so its firmware needs to be loaded on each boot. However,
documentation about the (chip-specific) firmware loading procedure
is nowhere to be found.
- Super I/O automatic fan control: not yet implemented in coreboot.
To control fans, use software fan control methods in the meantime.
Change-Id: I106c195c890823f07227739c6b30133b996f6510
Signed-off-by: PugzAreCute <me@pugzarecute.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83267
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This change skips the ME firmware version logging in
print_me_fw_version() if the ME firmware SKU is detected as Lite SKU.
The reasoning is that the RO (BP1) and RW (BP2) versions are already
logged by the cse_print_boot_partition_info() function for Lite SKUs,
making the additional log redundant.
The check for the Lite SKU has been moved to print_me_fw_version(),
where the decision to print the version is made, instead of in
get_me_fw_version(), where the version information is retrieved.
TEST=Able to build and boot google/rex.
w/o this patch:
[DEBUG] ME: Version: Unavailable
w/ this patch:
Unable to see such debug msg.
Change-Id: Ic3843109326153d5060c2c4c25936aaa6b4cddda
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This change modifies the get_me_fw_version() function to be statically
scoped within src/soc/intel/common/block/cse/cse.c, as it is only used
by the print_me_fw_version() function in the same file.
The function declaration is also removed from intelblocks/cse.h.
The order of the function definitions in cse.c was also changed to be
more logical, with the now static helper function get_me_fw_version()
defined first, before it is used.
TEST=Able to build google/rex.
Change-Id: Idd3a6431cfa824227361c7ed4f0d5300f1d04846
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83257
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables the ME status reporting functionality
(dump_me_status, print_me_fw_version) in the CSE driver when
SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD is defined.
This is likely intended for platforms or configurations where the
CSE communication is only limited to payload.
BUG=b:305898363
TEST=Able to build google/rex.
Change-Id: I5e360408a7847968117df475ff244d79ceafa23f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83233
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
