Age | Commit message (Collapse) | Author |
|
Set TPM power_managed_mode to TPM_KERNEL_POWER_MANAGED. This will cause
the TPM kernel driver to send a shutdown command before s0i3 entry. This
change depends on S0i3 verstage running and reinitializing the TPM.
BUG=b:200578885
BRANCH=None
TEST=TPM shutdown sent during s0i3 entry on guybrush
Change-Id: I206022cc2a29690186206966c5d45bd55c303248
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add new memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. Micron MT53E512M32D1NP-046 WT:B
2. Samsung K4U6E3S4AB-MGCL
3. Hynix H54G46CYRBX267
BUG=b:209889645
BRANCH=dedede
TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I0b2f447a610a0a857e819ede257ac89cfd817018
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59991
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The code in these files is meaningless, and can be dropped.
Change-Id: I11571885059e8d5f930f741172c74b25faa09a15
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to 8
BUG=b:204844399
TEST=USE="project_primus emerge-brya coreboot" and verified
the setting meets the audible noise specification
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I0e0baf78a841278efda912cc5e4e9970329aacf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Hook up Thunderbolt and related settings to CMOS value of `thunderbolt`.
Changes TcssXhciEn, UsbTcPortEn and the relevant PCI devices.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ibadc7464831242ae51982610b410ccf0a6811edd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
|
|
add Hynix H54G56CYRBX247 support
BUG=b:210365851
BRANCH=guybrush
TEST=emerge-guybrush coreboot chromeos-bootimage
power on successfully
Change-Id: I99bed32025d10f62e63ace8f7f23e7cc3a740e93
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60075
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add I2C bus for taniks in Kconfig
BUG=b:210390520
TEST=emerge-brya coreboot and can boot to OS.
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I9b1719c3140c13f67e7cb0e6a69257774884bd4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Based on the Taniks's schematic, generate memory settings.
Schematic version is G570_MB_CHROME_1207_1630_ADC.
BUG=b:209531192,b:209553289
TEST=FW_NAME=taniks emerge-brya coreboot chromeos-bootimage
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I0c0794fb94d1f6271de604835ae1d2b20696ee70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add initial gpio configuration for taniks according to schematics
G570_MB_CHROME_1207_1630_ADC. The schematics reserved HPS and FP but
taniks doesn't use them, so set FP and HPS related pins to NC.
BUG=b:209492408, b:209553289
TEST=FW_NAME=taniks emerge-brya coreboot
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ic5c4ead4ad59137e1764e1226415ab6041c68aab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
It is required to set WPD (Write Protect Disable) bit
to make it possible to use MRC_RW_CACHE region with
CACHE_MRC_SETTINGS=y.
Change-Id: Iacab44b00d08c9bdc18bc3bdcb88833634c0b02e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I233d198b894f10fbf0042a5023ae8a9c14136513
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
A custom board with soc/intel/denverton_ns does not respond to
the keyboard and does not boot from the sata/USB disks.
Last post code 0x7b and the last line that is displayed at log
from SeaBIOS is:
All threads complete.
The issue is gone when adding setup_lapic() call to configure
EXTINT delivery of i8259 originated interrupts for the LAPIC.
Replicate call from other soc/ and make the call for both BSP
and AP CPUs.
Similar change was done for soc/intel/braswell in
commit b4f57bb3cac3ab29b9fa9c526ad4358faffb77a1.
Signed-off-by: Dmitry Ponamorev <dponamorev@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: Iafbfb733d0be546e0e2fba937fd1d262785aa54d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
To save the S3 power, USB3_HUB_RST_L is externally pulled up to a weak
resistor, so we have to reset the hub as early as possible.
Otherwise the USB3 hub may be not usable. Therefore, move USB3 HUB
reset function to bootblock.
BUG=b:210065282
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I92feb2316302fda32478b24c014bcd380d0ac55d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60088
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I736234b9a960c58193fcf7bc9184c9581c6c953b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Set open-drain GPIOs for ChromeOS as input and high-z mode.
After applying this patch, we can measure these pins from 1.0V to
correct voltage (1.8V) to prevent wrong judgement of low/high.
Reference document:
MT8186_SoC_Pinmux_V1_1
BUG=b:209342636
TEST=measure pins voltage 1.8V on kingler board
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ib55a773bb63404a1b952f7e7645eb7aba6638b00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Tracker is a debugging tool, and MT8186 only supports AP tracker.
When bus timeout occurs, the system reboots and latches some values
which could be used for debugging.
This function will be triggered only when it encounters the bug
hanging issue.
BUG=b:202871018
TEST=range of registers are dumped as expected.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie023de2a6f7421a16b2516baa0bf0bf6fff589e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There are two versions for tracker system:
Version 1 for MT8186, and version 2 for MT8192 and MT8195.
Reference document:
MT8169_bus_dbg_tracker_cfg_reg.xls from MediaTek internal.
BUG=b:202871018
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Idb146974da118b1cf5a349370bf7b2fa13f1aba8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59989
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PSP_S0I3_RESUME_VERSTAGE Kconfig option. When enabled, verstage will
be run in PSP during S0i3 resume. Setting softfuse bit 40 enables this
in PSP.
BUG=b:200578885, b:202397678
BRANCH=None
TEST=Verstage runs during s0i3 resume on Nipperkin
Change-Id: I2c185f787c1e77bd09f6cbbb1f47deb665ed0c79
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: Ib1be1db6f475ad0e1f34703bfe1257d02b86742c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The OEM may create and sign an Audio component to extend the Audio
capability provided by Intel. The manifest is then signed, and the
signature and public key are entered into the header of the manifest
to create the final signed component binary. This creates a secure
verification mechanism where firmware verifies that the OEM Key
Manifest was signed with a key owned by a trusted owner. Once OEM KM
is authenticated, each public key hash stored within the OEM KM is
able to authenticate the corresponding FW binary.
Link to the Document:
https://www.intel.com/content/www/us/en/secure/design/confidential/software-kits/kit-details.html?kitId=689893
ADL_Signing_and_Manifesting_User_Guide.pdf
BUG=b:207820413
TEST:none
Signed-off-by: ravindr1 <ravindra@intel.com>
Change-Id: Id52b51ab1c910d70b7897eb31add8287b5b0166f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I6b5864cfb9b013559cd318bc01733ba4d3792e65
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
With the elimination of remaining non-verifying CBFS APIs in CB:59682,
CBFS verification is now ready to be used in its simplest form, so
enable the respective Kconfig options in menuconfig. Add a few more
restrictions to the TOCTOU_SAFETY option for problems that haven't been
solved yet, and transform a comment in cbfs.c into a die() to make sure
we don't accidentally forget implementing it once vboot integration gets
added.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ifeba5c962c943856ab79bc6c4cb90a60c1de4a60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name.
Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:206676530
TEST=build
Change-Id: Ie73dc376078c0836edd980e09629399c5cc19594
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add Elan 6918 touchscreen for dewatt. (EKTH6918 Product Spec V0.5)
BUG=b:208373433
TEST=emerge-guybrush coreboot chromeos-bootimage. Teseted with Elan 6918 touchscreen.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: I28a7f5891e09ffa393c93881be68641d955efdf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Add Synaptics S9831 touchpad for dewatt.
BUG=b:208182457
TEST=emerge-guybrush coreboot chromeos-bootimage. Tested with Synaptics S9831 touchpad.
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Change-Id: Id3e0636dd0ce5b80c2044c1dfca20ca7eac87fc9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Add ALC5682I-VS codec support. ALC5682I-VD/ALC5682I-VS load different
hid name depending on SSFC.
BUG=b:198722640
BRANCH=octopus
TEST=Set CBI SSFC BIT9-11 to select codec, and test audio works
Change-Id: I80be12d88e100ce8586371fc49b36447859e24f8
Signed-off-by: Paul Huang <paul2_huang@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE
field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:198689479
BRANCH=zork
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I0c78aa166010ffa4d0cacc8a11d418d5a6906749
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59558
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's already implied by PARALLEL_MP now.
Change-Id: Ia76f1a925b2c0ebbba0bf20b094e716708d540c2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Currently coreboot and EC had different logic to interpret TCSS port
number which would break retimer update functionality since coreboot
would pass wrong port information to EC.
To correct this, coreboot has implemented function which converts
coreboot physical port mapping to EC's abstract port mapping.
Each SoC needs to implement this weak function since only SoC will have
correct physical port mapping data. This function should resolve issue
of port mismatch since coreboot will count only enabled ports and
provide correct EC port number in return.
BUG=b:207057940
BRANCH=None
TEST=Check if retimer update works on Redrix and correct port
information is passed to EC.
Change-Id: I3735b7c7794b46123aba3beac8c0268ce72d658c
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Currently coreboot interprets TCSS port number as per physical port
number while EC abstracts port number and provides indices as port
number. For example, if TCSS port 1 and 3 are enabled on the board,
coreboot will interpret port numbers as 0 and 2, but since only 2 ports
are enabled in the system EC will assign port numbers as 0 and 1.
This creates a port number mismatch while communicating between EC and
coreboot. This patch addresses issue where SoC can implement function
to map correct EC port as per port enabled in mainboard.
BUG=b:207057940
BRANCH=None
TEST=Check if code compiles successfully. Functionality will work once
function is implemented in SoC code.
Change-Id: Ia7a5e63838e6529196bd211516e4d665b084f79e
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
For additional power savings during RTD3, the PMC can power-gate the
ModPHY lanes that are used by the PCH PCIe root ports. Therefore,
using the previous PCIe RP-type detection functions, implement ModPHY
PG support for the PCH PCIe RPs.
This involves:
1) Adding a mutex so only one power resource accesses the PMC registers
at a time
2) OperationRegions to access the PMC's PG registers
3) Adding ModPHY PG enable sequence to _OFF
4) Adding ModPHY PG disable sequence to _ON
BUG=b:197983574
TEST=50 S0ix suspend/resume cycles on brya0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I19cb05a74acfa3ded7867b1cac32c161a83b4f7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59855
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to distinguish PCH from CPU PCIe RPs, define the
soc_get_pcie_rp_type function for Alder Lake. While we're
here, add PCIe RP group definitions for PCH-M chipsets.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7438513e10b7cea8dac678b97a901b710247c188
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
In order to distinguish PCH from CPU PCIe RPs, define the
soc_get_pcie_rp_type function for Tiger Lake.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic3f7d3f2fc12ae2b53604cd8f8b694a7674c3620
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Add entry in ACPI table under IPU device to provide silicon type
information to IPU driver. IPU kernel driver can decide the type of
firmware to load based on this information.
BUG=b:207721978
BRANCH=none
TEST=Check for the ACPI entry in the SSDT after booting to kernel
Change-Id: I4e0af1dd50b9c014cae5454fcd4f9f76d0e0a85f
Cq-Depend: chromium:3319905
Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The commit d023909b "treewide: Disable R_AMD64_32S relocation support"
clflush the address stored in _cbmem_top_ptr, which is the same address
cbmem_top() returns, instead of clflush _cbmem_top_ptr itself.
Fix that by providing the correct address to clflush.
Change-Id: If74591e7753cd9c3c097516430a212d416f53e4d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
`meminit_memcfg()` does common memory configuration, which is not
specific to each DIMM. Thus, move it out of the for-loop and call it
once.
Change-Id: If74875b45cd0d7a759883eaf564505ebf281bed5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The headers added are generated as per FSP v2471_02.
Previous FSP version was v2422_01.
Changes Include:
- UPDs description update in FspsUpd.h
- Adjust UPD Offset in FspmUpd.h and FspsUpd.h
BUG=b:208336249
BRANCH=None
TEST=Build and boot brya
Change-Id: I4d04652c06a1c1823d3859be209710c273a2ae8c
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Implement __fls() as an alias for log2(), and remove the duplicate
definitions in commonlib/storage/sdhci.c.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Ib458abfec7e03b2979569a8440a6e69b0285ac32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
All Tiger Lake mainboards use the default value for the setting
`SataMode`. Thus, drop it from their devicetree.
Change-Id: I291048250bc82552fde7c71a1dcda4894a61d465
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59890
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All Coffee Lake mainboards use the default value for the setting
`SataMode`. Thus, drop it from their devicetree.
Change-Id: Ibb329eb8b752c2220bb25f14fb6ae92dd8a308d6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59889
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All Skylake mainboards use the default value for the setting `SataMode`.
Thus, drop it from their devicetree.
Change-Id: I9be5eca93cac65afc4cc30ceb64d9a5b7e5cd514
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59888
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1d975713129d0a7bce823232d225ed17ee28a04d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I9e511de5e5b79936ed09538b3877655f78de15a9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Device 4 was introduced with a wrong name, since it is the SA Thermal
Subsystem and it does nothing have to do with DSP. Thus, rename it
accordingly.
Change-Id: I8edc764413df5f323098e60d0a3f0f87a7e656cb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60049
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch includes (edk2/edk2-stable202111) all required
headers for edk2-stable202111 EDK2 tag from EDK2 github
project using below command:
>> git clone -b edk2-stable202111 https://github.com/tianocore/edk2.git
commit hash: bb1bba3d776733c41dbfa2d1dc0fe234819a79f2
Only include necessary header files.
MdePkg/Include/Base.h was updated to avoid compilation errors
through safeguarding definitions for MIN, MAX, NULL, ABS, ARRAY_SIZE.
Note: edk2-stable202111 tag is required to adopt FSP 2.3 specification.
- Need to add ExtendedImageRevision in FSP_INFO_HEADER structure.
- Need to add FSP_NON_VOLATILE_STORAGE_HOB2 header.
Change-Id: I786cc05f9a638ac6226ebc8c0eaf1dc8189a4ca4
Signed-off-by: Subrata Banik <subi.banik@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
With very little changes this code can be used to initialize systems
without SMP. The linker will remove most of the code.
Change-Id: Ia0e8fdf8ed7bc2e0e4ff01be8d3e3c3cb837e6c7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In commit 667471b8d8 (ec/google/chromeec: Add PLD to EC conn in ACPI
table), PLD is added to ACPI table. It causes the DUT to not boot into
the OS. So fix the USB3/USB2 Type-C Port C2 PLD group order from 3 to 2
to solve this issue.
Fixes: 667471b8d8 ("ec/google/chromeec: Add PLD to EC conn in ACPI table")
BUG=b:209723556
BRANCH=none
TEST=build coreboot and boot into OS.
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ia4cf2d735de524ae721800600536923d1d47f04b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The `cpu_get_power_max()` function returns the TDP in milliwatts, but
the vr_config code interprets the value in watts. Divide the value by
1000 to fix this.
This also fixes an integer overflow when `cpu_get_power_max()` returns
a value greater than 65535 (UINT16_MAX).
Change-Id: Ibe9e0db6762eee5cc363f8b371c8538eb92f6308
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Enable TPM init in bootblock so that all further stages and other CBFS
files are directly measured into PCRs immediately instead of being
logged into a buffer and replayed to the TPM in ramstage.
Change-Id: Ib3ac29aa72abe8e967660ae7e8416aeb8812de26
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
coreboot code currently supports different UDK binding as per
underlying FSP requirement, example: ICL and TGL uses
UDK_2017_BINDING while ADL uses UDK_202005_BINDING Kconfig.
These UDK binding Kconfigs are being used to choose the correct
UDK_VERSION.
This patch introduces `UDK_BASE` Kconfig option so UDK_VERSION
if clause don't need to add specific UDK binding Kconfig everytime with
introduction of newer UDK bindings in future.
Tested with BUILD_TIMELESS=1, Hatch remains identical.
Change-Id: I64c51aa06a14f0ce541537363870ac3925b79a68
Signed-off-by: Subrata Banik <subi.banik@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
ADL-P silicon can support 7 SRC CLK's and 10 CLKREQ signals. Out of 7
SRCCLK's 3 will be used for CPU, the rest are for PCH. If more than 4
PCH devices are connected on the platform, an external differential
buffer chip needs to be placed at the platform level.
A mainboard designer can choose to add an external clock chip, and
select the SRC CLK using CONFIG_CLKSRC_FOR_EXTERNAL_BUFFER.
CONFIG_CLKSRC_FOR_EXTERNAL_BUFFER provides the CLKSRC that feed clock to
discrete buffer for further distribution to platform.
TEST=Able to detect SD card connected at x4 PCIe Gen 3 Slot.
localhost ~ # dmesg | grep mmc
[ 4.997840] mmc0: SDHCI controller on PCI [0000:ae:00.0] using ADMA
[ 5.460902] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 5.473555] mmcblk0: mmc0:aaaa SS08G 7.40 GiB
[ 5.494268] mmcblk0: p1
Change-Id: I21f1155374049c90aa45db25d4128b39aa5898bb
Signed-off-by: Subrata Banik <subi.banik@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds the setting of PsysPmax to 143 W according to
gimble board design.
BUG=b:206990759
TEST=emerge-brya coreboot chromeos-bootimage & ensure the value is
passed to FSP by enabling FSP log & Boot into the OS
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I851e0871461a9a9769c6b84f7d8287d989c23f06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CB change will enable the CSE region sub-partition OEMP,
where the OEMP binary will be stitched. OEM KM has Audio FW's key hash.
So, CSE uses this information to authenticate Audio FW.
BUG=b:207820413
TEST: Boot to kernel and check for the audio authentication
is successful
localhost ~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sofrt5682 [sof-rt5682], device 0: max357a-spk (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 1: Headset (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 2: HDMI1 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 3: HDMI2 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 4: HDMI3 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: sofrt5682 [sof-rt5682], device 5: HDMI4 (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
Cq-Depend: chrome-internal:4286038
Signed-off-by: Ravindra N <ravindra@intel.corp-partner.google.com>
Change-Id: I3620adb2898efc002104e0ba8b2afd219c31f230
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
As per the schematics, smart card is expected to operate in normal mode
by default. So configure the SOC_SC_PWRSV gpio accordingly.
BUG=b:202992077
TEST=Build and boot to OS in Nipperkin board version 2.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I8e12600ad45734b144a30c868f0e4f323aa056f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
After assessing the signal integrity, 100 MHz SPI fast speed can be
enabled for SPI ROM.
BUG=None
TEST=Build and boot to OS in Nipperkin board version 2. Perform 250
iterations of warm and cold reset each.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: Id973acb939b69e0beda26252e57a278892f2f57d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
CB:58374 (for mb/google/brya0) was merged before brya4es is
available (CB:59728). And since brya4es is forked from brya0, brya0's
change need to be brought into brya4es as well.
BUG=b:203014972
TEST=build
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I97489343b8f7a5b9457cd6f4a61cc37cd10ab450
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Hook up `Device4Enable` FSP setting to devicetree state and drop its
redundant devicetree setting `Device4Enable`.
The following mainboards enable the DPTF device in the devicetree
despite `Device4Enable` is not being set.
* google/deltaur
Thus, set it to off to keep the current state unchanged.
Change-Id: Ic7636fc4f63d4beab92e742a6882ac55af2565bc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
`SataEnable` is set by some boards, but it doesn't have any effect since
its related FSP option is hooked up to the devicetree state. Thus, drop
it.
Change-Id: Id645bfcade7ca1d495fb8df538113b3d10392a82
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8bc3025331bb25b02712b5d2b654f7997f0aba4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Hook up `SmbusEnable` FSP setting to devicetree state and drop its
redundant devicetree setting `SmbusEnable`.
The following mainboards enable the SMBus device in the devicetree
despite `SmbusEnable` is not being set.
* google/deltaur
* starlabs/laptop
Thus, set it to off to keep the current state unchanged.
Change-Id: I0789af20beb147fc1a6a7d046cdcea15cb44ce4c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
1. Copy the default configuration from Puff.
2. Update the 'stop_gpio' to GPP_H22.
BUG=b:193750191
BRANCH=None
TEST=Update kernel for 8125 outbox driver and test with
command suspend_stress_test.
Change-Id: I2e82dbc1e6c68cbd84b603adc7fdc3ee1d4d3392
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The original change was for mb/google/redrix (commit 0167f5adbb),
"The ChromeOS kernel platform driver is adding support for a ChromeOS
privacy screen device, and in order to locate that device, the driver
uses the GOOG0010 reserved HID for this"
But it was merged before redrix4es is available. As redrix4es is forked
from redrix, relevant change in redrix need to be brought into
redrix4es as well.
BUG=b:206850071
TEST=build
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: I5ac90c249273bf4e75cccb5889844a7f196f56fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
CONFIG_ONBOARD_SAMSUMG_MEM was used to force Samsung memory.
CPLD returns different values for every board revision. Use this value
to determine the memory type.
BUG = N/A
TEST = Boot Facebook FBG1701 Rev 1.0 - 1.4
Change-Id: I21b5ddc430410a1e8b3e9012d0c07d278880ff47
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The macro was defined using PCH_DEV_SLOT_CPU_1, which doesn't exist,
so replace it with the correct value of SA_DEV_SLOT_CPU_1.
Change-Id: If6d294d681907c51ac5678c9251364d4d6df4329
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59981
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Since 4ES variants were forked from their own original variants,
use the same TPM I2C as well.
BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Iddd6d8c22a181aba596b836f20392f76539b8549
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Move the SMM Kconfig options to the specific agesa cpu families.
Select NO_SMM for family14 since since no Fam14h platform uses SMM.
Leave SMM_ASEG enabled for family15tn and family16kb for now.
TEST=Boot Debian 11 on PC Engines apu1
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I09bbe036a88dada847219606ec79c68e7ca8e5cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
All SPI interface setup related functionality that Stoneyridge
implemented in its southbridge code is already present in the common AMD
SoC code, so use that code instead.
The common fch_spi_early_init function requires the SPI controller's
base address to be set, so call lpc_set_spibase(SPI_BASE_ADDRESS) right
before it. fch_spi_early_init then calls lpc_enable_spi_rom and
lpc_enable_spi_prefetch which can be removed from the board code now.
Next it calls fch_spi_configure_4dw_burst which does the same as the now
removed sb_disable_4dw_burst function when
SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST is set to n which is the default.
This option can also only be set to y for SoCs that aren't Stoneyridge.
Finally fch_spi_early_init calls fch_spi_config_modes which configures
the SPI mode and speed settings according to the Kconfig settings and
the settings in the amdfw part. On Kahlee this was done by calls to
sb_read_mode and sb_set_spi100 before. The previous patch added the
remaining Kconfig settings, so the resulting register values don't
change in the non-EM100 case. In the EM100 case the TPM speed is changed
from 64 to 16 MHz.
TEST=Both the non-EM100 mode with a real SPI flash and the EM100 mode
with a first-generation EM100 results in Google/Barla reaching the
payload and the show_spi_speeds_and_modes call in bootblock prints the
expected settings:
relevant bootblock console output in non-EM100 case:
SPI normal read speed: 33.33 MHz
SPI fast read speed: 66.66 Mhz
SPI alt read speed: 66.66 Mhz
SPI TPM read speed: 66.66 Mhz
SPI100: Enabled
SPI Read Mode: Dual IO (1-2-2)
relevant bootblock console output in EM100 case:
SPI normal read speed: 16.66 MHz
SPI fast read speed: 16.66 MHz
SPI alt read speed: 16.66 MHz
SPI TPM read speed: 16.66 MHz
SPI100: Enabled
SPI Read Mode: Normal Read (up to 33M)
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8f37a3b040808d6a5a8e07d39b6d4a1e1981355c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Before this patch only the SPI settings that will also end up in the
amdfw part of the firmware were specified in the board's Kconfig. This
patch adds the settings from Kahlee's bootblock.c to the Kconfig file
which will be needed in subsequent patches. Also add a comment about the
EM100 case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie42feb9b41f435c329bf1c78471e65ef5a3fb783
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The PSP EFS code to get the SPI mode and speed from the amdfw part of
the firmware image also works for Stoneyridge which is the one SoC that
selects SOC_AMD_COMMON_BLOCK_PSP_GEN1. Also amdblocks/psp_efs.h already
handles the SOC_AMD_STONEYRIDGE case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibddd3f9237e561d9f0f6b4ad70f59cce1f956986
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
To support gpio reset SoC, we need to pass the reset gpio parameter to
BL31.
TEST=build pass
BUG=b:202871018
Cq-Depend: chromium:3188686
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I48d8d004ea92e950d0040a11133c57c121b86af3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable configuration to build with MT8186 arm-trusted-firmware drivers.
TEST=build pass
BUG=b:202871018
Cq-Depend: chromium:3189573
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ib23b112a0bf3d056b932a87b86aaff79508ef50c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The reference design has changed to use GPIO SET1 for NOR flash.
There are no devices already built using SET0 so we can safely
change the implementation without conditional configs.
Reference document:
kingler_mt8186_mt6366_lpddr4x_e.pdf, page 11.
crab_proto 0_2021112.pdf, page 11.
BUG=b:202871018
TEST=flash verify pass on kingler on bootblock stage
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I031686ccddcf789f3fa966d113ee48949e454b8f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Retrieve the SKU ID for Corsola via CBI interface.
If that failed (or no data found), fallback to ADC channels for SKU ID.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I2888190d498df28b5ae13cf92cc41d088e8f8ee7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Fixed according to the declaration in
soc/intel/common/block/include/intelblocks/cfg.h.
Change-Id: I50dbc00806fefda8f4dac8bfa21dc714a9504566
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
amplifier
Compatible headphone codec "ALC5682I-VS" and speaker amplifier "ALC1015Q-VB"
BUG=b:208912135
TEST=ALC5682I-VD and ALC1015Q-VB can work normally
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Id661280061ede3fbb63c962dee8fb18a2053ad66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Combine guybrush mem_parts_used.txt across guybrush variants. Guybrush
reference memory parts is used as the base, then Nipperkin memory
parts were appended, followed by DeWatt memory parts. Duplicates were
removed.
The memory id mapping was not affected on guybrush reference and
Nipperkin. DeWatt memory id mapping was affected, DeWatt boards will
need to be adjusted.
This works around a limitation in APCB, which currently only supports
one set of memory SPDs.
BUG=b:209486790, b:204151079
BRANCH=None
TEST=Boot guybrush and nipperkin
Change-Id: Ie17025e092f2b9397afea33fce285e80ef5dc995
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
According to https://uefi.org/specs/ACPI/6.4/04_ACPI_Hardware_Specification/ACPI_Hardware_Specification.html#pm1-event-grouping
> For ACPI/legacy systems, when transitioning from the legacy to the G0
> working state this register is cleared by platform firmware prior to
> setting the SCI_EN bit (and thus passing control to OSPM). For ACPI
> only platforms (where SCI_EN is always set), when transitioning from
> either the mechanical off (G3) or soft-off state to the G0 working
> state this register is cleared prior to entering the G0 working state.
This means we don't want to clear the PM1 register on resume. By
clearing it the linux kernel can't correctly increment the wake count
when the power button is pressed. The AMD platforms implement the _SWS
ACPI methods, but the linux kernel doesn't actually use these methods.
BUG=b:172021431
TEST=suspend zork and push power button and verify power button
wake_count increments. Verified other wake sources still work.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iaa886540d90f4751d14837c1485ef50ceca48561
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Stoneyridge selects ARCH_X86 unconditionally and all coreboot code will
run on the x86 cores. On Picasso and later, the Chromebooks run verstage
on the PSP which is an ARM V7 core which needs some special handling
cases in the code, but this doesn't apply to Stoneyridge.
TEST=Timeless build results in an identical image for Google/Careena.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I013efd13b56c0191af034a8c4b58e9b26a31c6e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59960
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
According to https://uefi.org/specs/ACPI/6.4/16_Waking_and_Sleeping/sleeping-states.html?highlight=power%20states#
> For ACPI/legacy systems, when transitioning from the legacy to the G0
> working state this register is cleared by platform firmware prior to
> setting the SCI_EN bit.
This change makes sure we clear the PM/GPE blocks are cleared before
enabling the SCI_EN bit.
BUG=b:172021431
TEST=Boot guybrush and morphius to OS and verify suspend resume still
works.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Icc6f542185dc520f8d181423961b74481c0b5506
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
In ec/google/chromeec: Add PLD to EC conn in ACPI table(667471b8d807da5a5a9277db47e069ad3b1351c7), PLD is added to ACPI table. It causes the DUT to not boot into the OS. So fix the USB3/USB2 Type-C Port C2 PLD group order from 3 to 2 to solve this issue.
BUG=b:209568644
BRANCH=none
TEST=build coreboot and system boot into OS.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: If5ce6ca061d9d56ba0bbb1f157b2ba278d3fa9c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59953
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities. Haven't checked the reference
code, but the register descriptions suggested that the register in
Mullins behaves similar to the one in Stoneyridge. Right now this code
is unused, but it's probably still a good idea to fix it.
TEST=Booting Debian 11 with kernel 5.10 on apu2 still works when adding
a call to hudson_set_spi100 with this patch applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifbd960a9509542b28f03326a3066995540260bef
Tested-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for Stoneyrige also only sets the SPI_USE_SPI100 bit and
doesn't zero out the other bits.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d32fc2084bb34ea57924bae68511c6836587790
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59933
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities of the SPI interface. The
reference code for both Picasso and Cezanne also only sets the
SPI_USE_SPI100 bit and doesn't zero out the other bits.
TEST=Verified that Mandolin still boots. It didn't show any signs of
possibly related instabilities before though, so this test doesn't say
much.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71c2ec1729d5cb4cdff6444b637af29caaa6f1c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
commit 90ac882a32075b44435aa19ea664b89b79cac76e (soc/amd/common/block/
spi: introduce SOC_AMD_COMMON_BLOCK_SPI_4DW_BURST) introduced a Kconfig
option to enable/disable the 4DW burst support in the SPI flash data
prefetcher, but missed to update the documentation above the
fch_spi_early_init prototype, so update the outdated documentation now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I07c4b0b02251da63d34a172e2636894e99845d6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Initialize SPI bus 2 for TPM control.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I8ede68d6eb594890195e8464151c1c0f88aeee43
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Set VB2_CONTEXT_EC_TRUSTED in verstage_main.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If2837f5db52f91f5418d222d4dcd1af2aebcc105
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Initialize SPI bus 1 for Chrome EC control.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I7d032d595f7ca1dbed3de4dfe308ff4be64333cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The SPI speed is 218.4MHz, so correct the value of SPI_HZ.
BUG=b:202871018
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I6e8ba10a851e1507405cdd41939a176462734487
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The setting of SPI NOR GPIOs should be:
CS: pull up.
CLK/IO0/IO1: pull down.
BUG=b:202871018
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ideacb797a1dc9999ab6ba00cf33adbbbc24213dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Disable SMM_ASEG and select NO_SMM since the platforms do not use SMM.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I47237421c3dd5bd043447831263d72c9956cdaf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Current log2_ceil(x) is defined as log2(x * 2 - 1). When x is larger
than (1 << 31), (x * 2 - 1) won't fit in u32, leading to incorrect
result. Therefore, correct it as (log2(x - 1) + 1). Also add unit tests
for inline functions in lib.h.
BUG=none
TEST=make tests/lib/lib-test
BRANCH=none
Change-Id: If868f793b909a6ad7fc48a7affac15e2c714fa2e
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
These functions can't be weak, because they actually need to configure
the GPIOs for eSPI and the TPM. With this change zork boots again.
I also noticed that zork doesn't use the early table in bootblock. This
means that zork will only boot if psp_verstage is enabled.
BUG=b:209465425
TEST=boot zork to ramstage
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I384fd578efe7da0a3d74829cccf38c3ed524f130
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Use KiB and MiB instead of multiplying/dividing with/by the numeric
value when doing region size calculations.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I56c380190b11aa3214cce31b82974327e3d15000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Remove global variables `sblink` and `node_nums` and add function
`get_node_nums()` which reads from PCI config once and returns a static
variable.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I20a47f967093ef91355377c164656cabadc30fe6
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add a list of gpios to lock for brya. This currently includes
GPIOs connected to the FPMCU.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: Idea42a58575c280be0770d38f934acdf5508c45d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change supplies a list of ADL gpios that are connected to non-host
(x86) controllers and should be locked after initial configuration.
Set SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS to enable GPIO locking.
BUG=b:210430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: I457bab39f945ab31a89542c6498a73af70cbf9ee
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
For added security, there are some gpios that an SoC will want to lock
once initially configured, such as gpios attached to non-host (x86)
controllers, so that they can't be recofigured at a later point in
time by rogue code.
Likewise, a mainboard may have some gpios connected to secure busses
and/or devices that they want to protect from being changed post
initial configuration.
This change adds a generic gpio locking mechanism that allows the SoC
to export a list of GPIOs to be locked down and allows the mainboard
to export a list of GPIOs that it wants locked down once
initialization is complete.
Use the SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS Kconfig option to
enable this feature.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify
brya0 boots successfully to kernel.
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Change-Id: I42979fb89567d8bcd9392da4fb8c4113ef427b14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to 16
BUG=b:206704930
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I2be3d30403284b98276c837adefd91aa62c971e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59535
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We only have ADL-P 6+8+2 (45W) VR configuration now. Based on the
power map, fill in correct ADL-P 6+8+2 (28W) VR configuration.
BUG=b:202486131
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ie8dbd95b2d8e49b5898b2a97aff72e0e64868c8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
In previous patch (CB:56764), only basic settings were added.
Now complete devapc settings on MT8195.
1. Update permission setting
2. Updtate master domain setting:
- domain 1: PCIE0, PCIE1
- domain 2: SPM, SSPM, CPU_EB
3. Set domain remap
- MMSYS (4-bit to 2-bit)
- TINYSYS (4-bit to 3-bit)
- TINYSYS (3-bit to 4-bit)
- TINYSYS to EMI (3-bit to 4-bit)
- INFRA2 (3-bit to 4-bit)
4. Set SCP domain and ADSP domain
- domain 3: SCP
- domain 4: ADSP
BUG=b:204347737
TEST=sanity test pass
Change-Id: I1846d56d2dc362de64b28e0ed9a0681f186af7ee
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59746
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|