summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-07-28mb/google/brya/var/anahera{4es}: Add H54G68CYRBX248 supportWisley Chen
Generate SPD id for hynix H54G68CYRBX248 BUG=b:239899929 BRANCH=firmware-brya-14505.B TEST=run part_id_gen to generate SPD id Change-Id: I96babe340678ca9b82b06d3193b93a7676f23fef Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28mb/google/brya/var/redrix{4es}: Add H54G68CYRBX248 supportWisley Chen
Generate SPD id for Hynix H54G68CYRBX248 BUG=b:239888704 BRANCH=firmware-brya-14505.B TEST=run part_id_gen to generate SPD id Change-Id: I9412b988bcdb0c744e016f3add6dacda8185d6db Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28mb/google/brya/var/ghost: Correct CNVi pinsEric Lai
GPP_F0 to GPP_F4 is for CNVi and should be NF1. GPP_F5 is for CNVi CLK_REQ, and should be NF3 CRF_XTAL_CLKREQ. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=CNVi wifi can get probed in kernel. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ice3fde3a457f6f5c058c0a7d3ca2e63775bda96c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
2022-07-28soc/intel/alderlake: Enable LPIT supportJeremy Soller
Add SLP_S0 residency register and enable LPIT support. Change-Id: I45e1fc9df3e782cdaac810af3189c5797b1fe413 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28soc/intel/alderlake: Set Energy Perf Bias appropriate default valueJeremy Compostella
The current "normal" EPB (six) setting resulted in the desired out of box power and performance for several CPU generations. However, a power and performance analysis on Alder Lake and Raptor Lake CPUs demonstrates that this value results in undesirable higher uncore power and that seven is a more appropriate value. Note: the Linux kernel "4ecc933b x86: intel_epb: Allow model specific normal EPB value" patch sets the EPB to 7 for Alder Lake. BRANCH=firmware-brya-14505.B BUG=b:239853069 TEST=verify that EPB is set by coreboot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: I5784656903d4c58bedc5063ee3ef310a99711050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66059 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Cliff Huang <cliff.huang@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-28soc/intel/alderlake: Enable Energy/Performance Bias controlJeremy Compostella
According to document 619503 ADL EDS Vol2, bit 18 of MSR_POWER_CTL must be set to be able to set the Energy/Performance Bias using MSR IA32_ENERGY_PERF_BIAS. Note that since this bit was not set until this patch, the `set_energy_perf_bias(ENERGY_POLICY_NORMAL);' call in `soc_core_init()` was systematically failing. BRANCH=firmware-brya-14505.B BUG=b:239853069 TEST=verify that EPB is set by coreboot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Ic24abdd7f63f4707b8996da4755a26be148efe4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-28google/trogdor: Add new variant Pazquel360Yunlong Jia
This patch adds a new variant called Pazquel360 \ that is identical to Pazquel for now. BUG=b:239987191 TEST=make Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: I0a9ca4a59fb44256d0d8fcdbdf2a7db533c84412 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66150 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Bob Moragues <moragues@google.com>
2022-07-28commonlib: compiler.h: Use non-concise comment stylePaul Menzel
The concise multi-line comment style is for inside function bodies to save space. Outside of it, use non-concise style. Change-Id: I34d9ec6984b598a37c438fa3c395b5478207e31d Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-07-28mb/google/rex: Initial setup for ramstage/early gpio configTarun Tuli
This adds the initial gpio configuration for the rex initial variant. BUG=b:238165977 TEST=Boots and no errors on simics Change-Id: I55ab31c7943e22df9cec8db4a9f0c3ab6f065ae1 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65952 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-28soc/intel/meteorlake: Fix GPIO reset mapping as per GPIO BWGSubrata Banik
This patch fixes the documentation discrepancy of GPIO reset type between PCH EDS and GPIO BWG. As per GPIO BWG, there are four GPIO reset types in Meteor Lake as below: - Power Good - (Value 00) - Deep - (Value 01) - Host Reset/PLTRST - (Value 10) - Global Reset for GPP - (Value 11) Also, dropped the need for having dedicated reset type for GPIO community 3. As per the MTL EDS, all GPIO communities have the same reset type. BUG=b:213293047 TEST=Able to build and boot Google/Rex without below error msg. [ERROR] gpio_pad_reset_config_override: Logical to Chipset mapping not found Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Id7ea16d89b6f01b00a7b7c52945f6e01e8db6cbd Reviewed-on: https://review.coreboot.org/c/coreboot/+/66155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Will Kim <norwayforest92@gmail.com>
2022-07-28soc/intel/gpio: Add new macro for GPP PAD reset type as `Global Reset`Subrata Banik
This patch introduces a new macro for GPP PAD reset type as `Global Reset` as documented in Alder Lake EDS doc 630603. BUG=b:213293047 TEST=Able to build Google/Kano with this change. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I39428911babc393dd10750801522a00d0b26d3e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-27soc/amd/sabrina: Disable CCP DMA and HW MODEXPKarthikeyan Ramasubramanian
Enabling them causes firmware keyblock/preamble and/or body verification failure. Hence disabling them to use software based verification. Re-enable them once the issue is root-caused. BUG=b:217414563 TEST=Build and boot to OS in Skyrim with PSP and x86 verstage. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7e259ae5d790977d08afcb0a77f8d4f38c85f39e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66134 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-27soc/amd/sabrina: Do not pass SHA operation modeKarthikeyan Ramasubramanian
Currently only SHA_GENERIC is used and does not need to be passed. BUG=b:217414563 TEST=Build and boot to OS in Skyrim with PSP and x86 verstage. Change-Id: Id705b1361fffaf940c51515e7f77d7fb0677fc4a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-27mb/google/brya/crota: Remove MAC address passthru supportFranklin Lin
ChromeOS connection manager (shill) already has support for dock MAC address passthrough, therefore remove the code to pass a dock's MAC address in ACPI. BUG=b:235045188 TEST=build coreboot Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com> Change-Id: I78320a7c6b0fd5392e24b63bff234229a3f4b9bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/66040 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-27mb/google/brya/var/ghost: Update memory DQ mapEric Lai
Follow latest schematic 6/27 to update the DQ map. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=build passed. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I8d0de04a001cab53a245185707ebc9da7a501ec4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66122 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-07-27drivers/wifi/generic: Revert changes to generate missing SSDT for PCIeReka Norman
wifi This reverts commit 5e6fd360de7fe92f1e8b1b3eb20241809e2a6aff. On nereid, the SSDT entry for the PCIe wifi device is missing, causing wake-on-WLAN not to work since the _PRW is missing. It seems like when commit 5e6fd360de changed the SSDT generation logic for CNVi and PCIe wifi, it broke the PCIe case. `wifi_pcie_ops` are never assigned to any device, so `parent && parent->ops == &wifi_pcie_ops` always returns false, and the `wifi_cnvi_ops` are used even for PCIe devices. Undo the changes in that CL. This allows both the CNVi and PCIe cases to work. That CL was meant to fix an issue with the CNVi _PRW containing garbage, but I can't reproduce this when the change is undone. It was also meant to fix the following error on CNVi devices, but I don't see any errors with this change: [ERROR] NONE missing set_resources BUB=b:233325709 TEST=On both nivviks (CNVi) and nereid (PCIe), check that the SSDT contains the correct wifi device entries (below), including a _PRW containing the correct GPE, and check that wake-on-WLAN works. nivviks: ``` Scope (\_SB.PCI0.CNVW) { Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x6D, 0x03 }) Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method { <snip> } } ``` nereid: ``` Device (\_SB.PCI0.RP01.WF00) { Name (_UID, 0x923ACF1C) // _UID: Unique ID Name (_DDN, "WIFI Device") // _DDN: DOS Device Name Name (_ADR, 0x0000000000000000) // _ADR: Address } Scope (\_SB.PCI0.RP01.WF00) { Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x23, 0x03 }) Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method { <snip> } } ``` Fixes: 5e6fd360de ("drivers/wifi/generic: Fix properties in generic-under-PCI device case") Change-Id: I100c5ee3842997c50444e5ce68d583834ed3a8ad Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66063 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-27mb/google/nissa/var/craask: Add DPTF passive and critical policiesTyler Wang
Add critical, passive policy, and pl values from thermal team. BUG=b:239495499 TEST=Build and test on MB, system can boot to OS. Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I8beb3b57ff56c6fe413bb0e3dd43d693aee08e36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66125 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-07-27soc/intel/meteorlake: Use coreboot native event handler for FSP-SSrinidhi N Kaushik
Beginning FSP 2.2 specifications Fsps Config Upd "FspEventHandler" was moved to Fsps Arch Upd. Hence we were not seeing Fsps Debug log was not using coreboot debug library. This change assigns Fspd Arch Upd FspEventHandler with coreboot ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER Kconfig is enabled. Before: Dumping FSPS_UPD - Size: 0x00001510 0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02 0x00 0x00 0x00000010: 0x00 With the fix: [SPEW ] Dumping FSPS_UPD - Size: 0x00001528 [SPEW ] 0x00000000: 0x41 0x44 0x4C 0x55 0x50 0x44 0x5F 0x53 0x02 [SPEW ] 0x00000010: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [SPEW ] 0x00000020: 0x01 0x00 0x00 0x00 0x20 0x00 0x00 0x00 0xAA [SPEW ] 0x00000030: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [SPEW ] 0x00000040: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 BUG=b:237263080 TEST=Able to build and boot MTL RVP, verified the FSP-S debug log is using coreboot debug library. Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ie63258f6427b3da7927a866bc3767f548b16e3e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66146 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-07-27mb/google/nissa/var/pujjo: Enable PCIe port 4 for WLANLeo Chou
Pujjo support WLAN device, enable PCIe port 4 for WLAN device BUG=b:239899932 TEST=Build and boot on pujjo Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: Ic8b7240941cf87a4f27963d50fffe28875114a81 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66073 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-27soc/mediatek/mt8195: Skip PCIe ops for eMMC SKUsYu-Ping Wu
To avoid unnecessary PCIe early initialization for non-NVMe devices (which would take about 150ms on dojo), skip setting PCIe ops when initializing mt8195 SoC. BUG=b:238850212 TEST=emerge-cherry coreboot TEST=Dojo SKU1 (eMMC) boot time <= 1s BRANCH=cherry Change-Id: I8945890ba422c0c4eb42683935220b7afbb80dfd Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-07-27mb/google/cherry: Introduce mainboard_needs_pcie_initYu-Ping Wu
Implement mainboard_needs_pcie_init() for cherry as a callback for mt8195 SoC to determine whether to initialize PCIe. When the SKU id is unknown or unprovisioned (for example at the beginning of the factory flow), we should still initialize PCIe. Otherwise the devices with NVMe will fail to boot. BUG=b:238850212 TEST=emerge-cherry coreboot BRANCH=cherry Change-Id: I2ed0ceeb37d2924ca16485fb2d130959a7eff102 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-07-26mb/google/brask/var/kuldax: correct Type-A USB3 port0/1 tx_de_empDavid Wu
1. Set Type-A USB3 port0/1 tx_de_emp to 0x2B to fix the USB3 Gen2 RX signal integrity issue. 2. Disable unused USB port. BUG=b:238230292 TEST=build FW and check Type-A USB3 port0/port1 RX pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8356ca30a965e5774a1556c5cb81e1586c55496c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-26mb/google/nissa/var/joxer: Configure descriptor for eMMC or UFSReka Norman
Joxer will have both eMMC and UFS SKUs, which require different settings in the descriptor. So update the descriptor at run-time based on fw_config. By default, the descriptor is configured for UFS. This configuration still boots fine on eMMC SKUs, it just might cause problems with S0ix. This is a temporary workaround. It will be removed once we've implemented a proper solution for configuring the descriptor differently for different SKUs. BUG=b:238234376 TEST=Make an identical change for nivviks. On both nivviks (eMMC) and nirwen (UFS), check that it boots and that the logs show the descriptor being configured as expected. Change-Id: I14232eb773936f2ecd183687208d332136935601 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-07-26soc/mediatek/mt8188: Initialize SSPMRex-BC Chen
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. It takes 21 ms to load sspm.bin. coreboot logs: CBFS: Found 'sspm.bin' @0x21680 size 0xa815 in mcache @0xffffeac4 mtk_init_mcu: Loaded (and reset) sspm.bin in 21 msecs (137348 bytes) TEST=we can see the sspm logs. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ib6443b64734048c1d71eeac650f36d7c4ac709cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/66067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-26soc/mediatek/mt8188: Initialize MCUPMRex-BC Chen
Load MCUPM firmware and boot up MCUPM in ramstage. It takes 41 ms to load mcupm.bin. coreboot logs: CBFS: Found 'mcupm.bin' @0x12580 size 0xf0c6 in mcache @0xffffead0 mtk_init_mcu: Loaded (and reset) mcupm.bin in 41 msecs (122184 bytes) TEST=we can see the mcupm logs after reset releases. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Id1e62d9d6ede1c453e03eeda0d9b16fafa9e2372 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-25mb/google/rex: Set GPIO Tier-1 GPEs in devicetreeKapil Porwal
Set GPE route as GPE0_DW0 -> GPP_A GPE0_DW1 -> GPP_E GPE0_DW2 -> GPP_F BUG=b:224325352 TEST=Verified in emulator that there is no regression Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I5e3e09cfc06d2556ea32cca23b3dae114a510498 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-25Revert "soc/intel/meteorlake: Align TCSS functions through SBI"Subrata Banik
This reverts commit b57d172fbb5265d632c031532fcc2aec156e065a. Reason for revert: Results into hard hang with serial debug msg as below: `[EMERG] Unable to unhide the P2SB device!` Intel team is working towards to fix this issue. BUG=b:239806774 TEST=Able to boot the Intel/MTLRVP with this revert. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic6be37c000afdf4f0c6c22497c233aa0bbc49d48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65500 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-25mb/google/rex: Override LP5 CCC configSubrata Banik
This patch overrides `Lp5CccConfig` UPD as per the CCC mapping data captured from the Rex schematics dated 07/16. BUG=b:224325352 TEST=Able to build Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia1d9e3665cff74a803e730c76f62773996efb3dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/66049 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-25soc/intel/meteorlake: Choose PCR write to lock GPIO PADSubrata Banik
Set the SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR config on Meteor Lake to instruct Pad Configuration Lock. BUG=b:211573253, b:211950520, b:213596994 TEST=Able to perform GPIO lock programming without error on MTLRVP. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Icd123adb02716149fa51c9e4c987c281f9de2f43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-07-25mb/starlabs/lite: Add support for VBOOTSean Rhodes
Add the required files to support VBOOT for when it is enabled. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I083107b21c23f42193fc88aa174ec22850f45bc8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65705 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-07-25arch/x86: Fix MAX_CPUS check proper for late X2APIC configSubrata Banik
The X2APIC_LATE_WORKAROUND kconfig allows bringing APs in XAPIC mode initially hence, it won't work if LAPIC ID is > 0xff. This patch ensures the MAX_CPUS logic is appropriate while selecting X2APIC_LATE_WORKAROUND kconfig from SoC. BUG=b:219061518, b:219053812 TEST=Able to build Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I466e6cc568024a9dea80af21e0ebf3572e74a1f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-25mb/google/nissa/var/pujjo: Add new supported memory partLeo Chou
Add pujjo new supported memory parts in mem_parts_used.txt. Generate SPD id for this part. Micron MT62F1G32D4DR-031 WT:B BUG=b:239776504 TEST=Use part_id_gen to generate related settings Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I95eb194ecbd5d39f66eb566132e75af056899325 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66039 Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-07-25soc/intel/gpio: Update GPIO Lock configuration recommendationSubrata Banik
This patch updates the GPIO lock configuration recommendation kconfig string to ensure the SoC user can select the correct config as applicable for the SoC. Note: From MTL onwards GPIO lock config can be performed using PCR write (MMIO write) and the GPIO team has confirmed this. BUG=b:213596994 TEST=Able to fix below GPIO lock config error msg on MTL with `SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR` kconfig enabled. [INFO ] Locking pad configuration using SBI [INFO ] gpio_pad_config_lock_using_sbi: Locking pad 73 configuration [ERROR] SBI Failure: Transaction Status = 1 [ERROR] Failed to lock GPIO PAD, response = 1 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Icab1e4849b8e08ee1c695c924599f1513774178f Reviewed-on: https://review.coreboot.org/c/coreboot/+/66113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-25mb/google/rex: Add memory configuration board strapsSubrata Banik
This patch reads various memory configuration GPIOs to fill in below details: 1. variant_memory_sku() 2. variant_is_half_populated() BUG=b:224325352 TEST=Able to build Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I23bad8c78523cb56008e6d67e7776e57e42fbeb9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-07-25soc/intel/meteorlake: Debug consent is set to 3 (USB3 DbC)Subrata Banik
This patch ensures the debug consent value is matching with the inline comment. TEST=Able to build the Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Icf72eb2aa4064fd78f4f99570a4cf44e41932ec3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66008 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-24mb/lenovo: Integrate W541 into haswell mainboardFelix Singer
Lots of code from lenovo/haswell can be reused for lenovo/w541. Thus, integrate it into lenovo/haswell and make it a variant. Change-Id: If99d842cff777fe27ff63baabc447e69b9d0333c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-07-24mb/lenovo/haswell: Make INT15 support T440p specificFelix Singer
In preparation to CB:63514, make the INT15 support specific for the T440p variant since the W541 doesn't support it currently. Change-Id: I8dfcc061e1b8a831f75bf9a8035770cb678a85d4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66106 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-24mb/lenovo/haswell: Hook up variants MakefileFelix Singer
Change-Id: I36091118d98f71dc4141aca4e45858a22d519a9b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-24intel/common/block/ipu: Add MTL IPU device idWonkyu Kim
TEST=Build mtlrvp and check IPU0 ACPI ojbect from ssdt Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ib5c3d455d272af0e753c775a5fd3f19851b7937d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66056 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-23mb/google/rex: Add GBB related configsSubrata Banik
This patch adds more GBB related configs. Select `HAS_RECOVERY_MRC_CACHE` config. Additionally, move VBOOT_LID_SWITCH config under VBOOT config. TEST=Able to build the Google/Rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I28976200cbd70dc23f58868ee89c0ac700793be9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66007 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-07-23mb/google/brya/var/skolas4es: Correct _PLD valuesNick Vaccaro
This patch is to denote the correct value of ACPI _PLD for USB ports. +----------------+ | | | Screen | | | +----------------+ C2 | | A0 C0 | MLB DB | C1 | | +----------------+ BUG=b:216490477 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I96202b9ac9586975e960d6577d279c995c67f34e Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66031 Reviewed-by: Won Chung <wonchung@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-23soc/intel/alderlake: Hide PMC and IOM devicesJeremy Soller
Hide these ACPI device so Windows does not warn about missing device drivers. Change-Id: Iba6cf7a17eefc9f4f247621f6625151f2fd5f3a7 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-23mb/system76/tgl-u: Convert galp5 to a variantTim Crawford
Change-Id: I49185352002f6df2f9e9ab9c39d44cc9247b41b5 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-23mb/system76/tgl-u: Convert darp7 to a variantTim Crawford
Change-Id: I6b3fe8f4acbb5a2f9fca605e07854ebcc3f2a065 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-23mb/system76/tgl-u: Convert lemp10 to variant setupTim Crawford
Change-Id: I11f2ebb94b0e9a3e2c18c5b2071ccc3e03c16655 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-23soc/intel/cannonlake: Set MAX_CPUS based on the SoC and PCHFelix Singer
Set the default value for MAX_CPUS in the SoC config and drop it from the mainboards where it is set to those values. Change-Id: Ib56fdcfe770ef736a2c5e183481d9f9966570e6d Signed-off-by: Felix Singer <felixsinger@posteo.net> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-23mb/google/skyrim/var/skyrim: Add two supported memory partsAmanda Huang
Add two memory parts and generate the associated DRAM part ID. 1) Hynix H9JCNNNBK3MLYR-N6E 2) Hynix H58G56AK6BX069 BUG=b:228415394 TEST=none Change-Id: I0f5ca291e02e209032e2533f4b2d4241b5e62e42 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-07-23mb/google/nissa/var/xivu: Disable WFC and pen garage based on fw_configIan Feng
Use fw_config Bit 0 and Bit 1 to control: Bit 0 = 0 --> enable WFC Bit 0 = 1 --> disable WFC Bit 1 = 0 --> enable pen garage wake Bit 1 = 1 --> disable pen garage wake BUG=b:238045498 TEST=emerge-nissa coreboot chromeos-bootimage Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I85bc4753bfd16fd460286aa2b3bb5f3341049f61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-22soc/apollolake: Don't select VBNV_CMOS if VBNV_FLASH is enabledSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If8af4657508f00feff8525b0135c7f73c1959965 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-22mb/starlabs/lite: Simplify the flash layoutSean Rhodes
Remove the sections that coreboot doesn't need to know about. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ide6c0d44f1f9ad9b962d2b8e14ac91e87f5ca031 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65453 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22mb/google/brya/var/skolas4es: add WFC definitions to fw_configNick Vaccaro
Reserve bits 15 and 16 in the fw_config to be used to specify WFC population status. Possible values for field WFC bits include: option WFC_ABSENT 0 option_WFC_MIPI_OVTI5675 1 option WFC_MIPI_OVTI8856 2 BUG=b:239613517 BRANCH=firmware-brya-14505.B TEST='emerge-brya coreboot' and make sure it compiles successfully. Change-Id: If797b79f0d094816eeb3df7bfded06e92e4e6a32 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-22mb/google/rex: Add TPM device to Kconfig and devicetreeKapil Porwal
Add TPM device for Rex. Device details: I2C Controller/Bus = 4 I2C Slave Address = 0x50 GPE = GPE0_DW1_03/GPP_E03 BUG=b:224325352 TEST=Verified in emulator that there is no regression Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Ifa3a5b503a203e3900049f27a54025156e22a285 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66014 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22Revert "mb/google/brya/var/kinox: Configure TDC current"Dtrain Hsu
This reverts commit 58f68fb0cb8e9824256a115d1ebdc840c281e987. Reason for revert: ODM thermal team request that change IA/GT TDC current back to 20A. BUG=b:237230877 TEST=Build and boot to Chrome OS Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I6a5cfdc18afb6fe43a3d630e5fa3d77c19640fc2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.corp-partner.google.com> Reviewed-by: Vinay Kumar <vinay.kumar@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
2022-07-22mb/google/rex: Enable EC_GOOGLE_CHROMEEC_BOARDID KconfigTarun Tuli
Enables the EC_GOOGLE_CHROMEEC_BOARDID feature so we can read board_id() on rex. TEST=Verified builds succeed and code is linked Change-Id: Id202019519fc4a05c80374bc97663e59fdca3d76 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66018 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-22mb/google/geralt: Add eMMC and SD card configurationsAndy-ld Lu
Geralt reference design has both eMMC and SD card interfaces, so we configure both in mainboard_init() in ramstage. TEST=boot to kernel using emmc successfully. BUG=b:236331724 Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com> Change-Id: I200a065ab96584d824153480e594e19baae97f9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65976 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22soc/mediatek/mt8188: Add eMMC and SD card configurationsAndy-ld Lu
Geralt reference design has both eMMC and SD card interfaces, so we have to configure both in ramstage. Implement msdc.c (mass storage device class) to place the eMMC and SD card drivers. This implementation is based on chapter 5.9 in MT8188 Functional Specification. TEST=boot to kernel using emmc successfully. BUG=b:236331724 Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.corp-partner.google.com> Change-Id: I6594c8466a133d3fdb0084716acca8dcf785f94f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65975 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22mb/google/geralt: Implement regulator interfaceHui Liu
Control regulator more easily with regulator interface. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I9727475774b3b9a8dcd49e5e60e133f9d745b407 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65875 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22mb/google/brya/var/ghost: Split ghost4adl into 3 variantsJack Rosenthal
We plan to make 3 firmwares which differ only by Kconfig options and can share a common variant directory. ghost4adl: Board with an ADL chip. ghost4es: Board near identical but has RPL-ES chip. ghost: Will have final RPL silicon. Since they will only differ by Kconfig options and Intel binary blobs, let's not duplicate the variant directory but instead share it in common. BUG=b:239456576 BRANCH=firmware-brya-14505.B TEST="make menuconfig", verify layout of board selection Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I94f2048bbe6675a807f8eba986a1ded0a4167733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-07-22mb/google/brask/variants/moli: set customized_leds for RTL8111KRaihow Shi
Follow the LED modification request in ADL_Moli_SC_MB_2022_0601.pdf and set the customized_leds to 0x0482 based on 7.4 Customizable LED Configuration in "REALTEK+RTL8111K-CG+SPEC+0116" for RTL8111K in moli. BUG=b:218985167 TEST=emerge-brask coreboot and check RTL8111K LED behaviour Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Ia154d15ecf14b32a4d589abf27b9573693339a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65958 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22mb/google/brya/var/brya0: add WFC definitions to fw_configNick Vaccaro
Reserve bits 15 and 16 in the fw_config to be used to specify WFC population status. Possible values for field WFC bits include: option WFC_ABSENT 0 option_WFC_MIPI_OVTI5675 1 option WFC_MIPI_OVTI8856 2 BUG=b:239613517 BRANCH=firmware-brya-14505.B TEST='emerge-brya coreboot' and make sure it compiles successfully. Change-Id: I23bdaf7feaff2e6a4979c3da789ab877e6ac3af2 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-22mb/google/kahlee: Increase VRAM from 16 to 32 MiBMatt DeVillier (AMD)
While adequate for ChromeOS, 16MiB VRAM is insufficient for current mainline Linux and Windows amdgpu drivers to operate properly. Under Linux, the driver fails to allocate a framebuffer and causes multiple kernel panics. Under Windows, the driver fails to load due to insufficient resources available. Revert the VRAM allocation to the previous amount of 32MiB. This change reverts commit 87dcd0061af4 ("mainboard/google/kahlee: Reduce VRAM to 16MB") Test: build/boot Linux 5.17.x on google/liara, verify framebuffer allocation succeeds and no kernel panic reported. Change-Id: I1967a203fed80456a20af00943eba21bc1c0577b Signed-off-by: Matt DeVillier (AMD) <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66022 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-22mb/google/brya/acpi: Poll more frequently in GPPLTim Wawrzynczak
The full dGPU power-on sequence, when executed from ACPI, is taking roughly 15ms or so, which puts it close to the maximum of 20ms required from the Nvidia spec. Changing the polling period to 100 us instead of 1 ms drastically reduces the time required for this sequence, now taking typically 7 ms or so. This gives a lot more margin during the power on sequence. BUG=b:238466724 TEST=Sequence verified by EE on a scope Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I3ba676c5fac983a0c1ad1d60c3863d06ed33fa27 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66020 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-22herobrine: Create Zoglin variantShelley Chen
Zoglin is like Hoglin, but with a smaller flash size, which requires us to create a new variant. BUG=b:239851866 BRANCH=None TEST=Make sure BOARD_GOOGLE_ZOGLIN builds Change-Id: Id1401a052061dcfc1d1ee41b88ce4a11fd9f3d01 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-07-21mb/google/brya/var/baseboard/skolas: set BOARD_ROMSIZE_KB_32768Nick Vaccaro
Skolas baseboard needs to set BOARD_ROMSIZE_KB_32768, so this change sets it. BUG=b:239628052 BRANCH=firmware-brya-14505.B TEST="emerge-brya coreboot" and verify that the following configs are set as: CONFIG_BOARD_ROMSIZE_KB_32768=y CONFIG_COREBOOT_ROMSIZE_KB_32768=y CONFIG_COREBOOT_ROMSIZE_KB=32768 CONFIG_ROM_SIZE=0x02000000 Change-Id: I0846b8e69c8b65e010eef9a8f4a88606197cd0c6 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-21mb/google: Use boolean type for "enable" argument for regulatorRex-BC Chen
Because 0 and 1 are the only possible values, 1. Change input argument "enable" of mainboard_enable_regulator to bool. 2. Change return value of mainboard_regulator_is_enabled() to bool. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iae09c5fedf8f7394bfbb677e5aee37ed061304fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65997 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google: Replace some strings in regulator.cRex-BC Chen
From comments of CB:65875, we replace *_vol to *_voltage. s/mainboard_set_regulator_vol/mainboard_set_regulator_voltage/ s/mainboard_get_regulator_vol/mainboard_get_regulator_voltage/ TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Iadf0408e8914d6e32915464f93979978c4634eaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/65994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21soc/mediatek/mt8188: Add VMCH, VMC support for MT8188Hui Liu
For MT8188, we need to enable and adjust VMCH and VMC to support SD cards. Therefore, we add VPA and VSIM1 voltage adjustment APIs. TEST=measure 3.0V in VMCH and VMC. BUG=b:236331724 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I03938f9ef17a0bdd615bcbbfc7b59fa5acb8fbfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/65874 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mb/google/geralt: Initialize PMICs in romstageBo-Chen Chen
TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I71cc69c74dd618f441140790af351095ead3f6f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65759 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21soc/mediatek/mt8188: Add PMIF and PMIC init supportHui Liu
Add PMIF, SPI, SPMI and PMIC init code. These PMIC settings are used by MediaTek internally. We can find these registers in "MT6365_PMIC_Data_Sheet_V1.4.pdf" and "MT6315 datasheet v1.3.pdf". The setting values are provided by MeidaTek designers. TEST=build pass BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: I05a51894b130a59c28d957b64d6401c8bb9cee91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-21soc/mediatek: Create a function to check ulposcRex-BC Chen
We will use the same drivers for checking ulposc in MT8188, so we add a new function pmif_ulposc_check() to common. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I40136eaeb2c08a97cd65bfb8a81f2f24739d4d51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65841 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-21mg/google/corsola: Enable TI50_FIRMWARE_VERSION_NOT_SUPPORTEDYu-Ping Wu
Ti50 hasn't implemented version reading yet. To avoid the confusing error message Did not recognize Cr50 version format enable TI50_FIRMWARE_VERSION_NOT_SUPPORTED to make clear that this feature is not supported. BUG=b:234533588 TEST=emerge-corsola coreboot BRANCH=none Change-Id: I18dd4b5bc05c2af06627275968e49aba048ba05e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-07-21mb/google/rex: Pulling GPIO programming early to get debug msgSubrata Banik
This patch moves the early GPIO programming from `bootblock_mainboard_init` to `bootblock_mainboard_early_init`. It will help to get the early debug prints as below. TEST=Without this CL the initial report platform information was missing as below: [DEBUG]  VBOOT: Loading verstage. [DEBUG]  FMAP: Found "FLASH" version 1.1 at 0x1c04000. [DEBUG]  FMAP: base = 0xfe000000 size = 0x2000000 #areas = 33 [DEBUG]  FMAP: area COREBOOT found @ 1c09000 (4157440 bytes) [INFO ]  CBFS: mcache @0xfef84a00 built for 18 files, used 0x414 of 0x2000 bytes [INFO ]  CBFS: Found 'fallback/verstage' @0x24d240 size 0x133d0 in mcache @0xfef84d50 With this CL the complete bootblock serial msg is coming. [NOTE ]  coreboot-.mtl.po.ww29.5 Fri Jul 15 21:47:36 UTC 2022 bootblock starting (log level: 8)... [DEBUG]  CPU: Genuine Intel(R) 0000 @ [DEBUG]  CPU: ID a06a0, MeteorLake A0, ucode: f0270108 [DEBUG]  CPU: AES supported, TXT supported, VT supported [DEBUG]  MCH: device id 7d14 (rev 00) is MeteorLake P [DEBUG]  PCH: device id 7e01 (rev 00) is MeteorLake SOC [DEBUG]  IGD: device id 7d55 (rev 00) is MeteorLake-P GT2 [DEBUG]  VBOOT: Loading verstage. [DEBUG]  FMAP: Found "FLASH" version 1.1 at 0x1c04000. [DEBUG]  FMAP: base = 0xfe000000 size = 0x2000000 #areas = 33 [DEBUG]  FMAP: area COREBOOT found @ 1c09000 (4157440 bytes) [INFO ]  CBFS: mcache @0xfef84a00 built for 18 files, used 0x414 of 0x2000 bytes [INFO ]  CBFS: Found 'fallback/verstage' @0x24d240 size 0x133d0 in mcache @0xfef84d50 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3e092cd749359e54fe518de21671275af4b03062 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65986 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-07-20mainboard/google/guybrush: Update Wake-On-LAN functionalityRobert Zieba
The generic wifi driver currently contains a lot of intel specific functionality that results in it not working properly on AMD platforms. This commit updates the base device tree to use the generic PCIe driver instead. BUG=none TEST=Ran on nipperkin device, dumped SSDT and checked wakeup sources Change-Id: Iafbc68c1ae33ccc260889f0b39fc5fe8a59d7aca Signed-off-by: Robert Zieba <robertzieba@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65990 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20mainboard/google/skyrim/baseboard: Enable Wake-On-LAN functionalityRobert Zieba
The generic wifi driver currently contains a lot of intel-specific functionality that interferes with enabling wake-on-lan. This commit changes the device tree to use the generic PCIe driver which better supports this functionality. BUG=b:237682766 TEST=Booted on skyrim device and verified that wake on LAN works Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: I5d15d33fd0a152eb3bf2bfe78e802483a701e750 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65800 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20drivers/pci/generic: Add support for `_PRW`Robert Zieba
This commit adds support for `_PRW` in this driver. BUG=b:237682766 TEST=Built and booted on Skyrim device, dumped SSDT Change-Id: Ife4ba48994cbf993bc88df8354576336438e4258 Signed-off-by: Robert Zieba <robertzieba@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65799 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20drivers/pcie/generic: Add support for custom ACPI nameRobert Zieba
This commit adds code to allow the driver to use an ACPI device name that is set in the device tree. BUG=b:237682766 TEST=Boot changes on Skyrim device, dumped SSDT Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: Ie40a335e35b8ac83658e67d7cfba0750dd4784ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/65798 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20drivers/pcie/generic: Clean up driverRobert Zieba
This removes unneeded and unused functionality in the driver as part of an effort to make the driver more generic and useful. The things that have been removed are: `DmaProperty` and its associated `is_untrusted` config, `_DSD` generation, and the companion device functionality. This driver isn't currently used anywhere so there won't be any issues from removing the above functionality. BUG=b:237682766 TEST=Built and booted coreboot on Skyrim device Change-Id: I0abd9148ab66ea9426069102ecc8c2fa77fea98e Signed-off-by: Robert Zieba <robertzieba@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65797 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20soc/amd/common/block/spi/fch_spi_ctrl: Fix restricted command writeFred Reitberger
The SPI_RESTRICTED_CMD register is not a PCI configuration register. It is memory mapped from the SPI bar. Verified against PPR 55570 rev 3.16, PPR 56569 rev 3.03, and PPR 57243 rev 1.50 TEST=Compile tested only Change-Id: I7c88aaea9ddac200644bb368be3bd4e9be47fd7b Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63305 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20mb/google/brya/var/agah: Adjust I2C speedTony Huang
Adjust I2C speed for codec, TPM, touchpad. BUG=b:237691531 TEST=Built and verified adjusted I2C speed < 400KHz Change-Id: I203d137d61019235ddf38ef74607427db2a7e975 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-20arch/x86/*.ld: Don't use CPP to include linker scriptsArthur Heymans
This makes inspection of linker scripts in the build dir a little easier. Change-Id: I509faa4cee2c9f066f4e20f6038349e1165a619a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-20arch/arm64,arm: Prepare for !SEPARATE_ROMSTAGEArthur Heymans
Prepare platforms for linking romstage code in the bootblock. Change-Id: Ic20799b4d6e3f62cd05791a2bd275000a12cc83c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-07-20mb/prodrive/atlas: Swtich from EC UART to LPSS UARTLean Sheng Tan
Switch x86 uart output from EC to LPSS. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I2756d139a72185ba6a5c6d1079d770ce33afdf71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65985 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20google/herobrine: Add Evoker variantSheng-Liang Pan
BUG=b:238571507 BRANCH=None TEST=emerge-herobrine coreboot Change-Id: Ie596e5c4b72de84d16571043db4291bbd0825c78 Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Bob Moragues <moragues@chromium.org>
2022-07-20soc/amd/sabrina: Fix boot region address passed to PSPKarthikeyan Ramasubramanian
PSP expects PSP L2 directory address relative to the start of the SPI ROM. Also PSP does not expect BIOS L2 directory address since it is an entry in PSP L2 directory. Update the configuration such that PSP verstage passes the right address to PSP. BUG=b:217414563 TEST=Build Skyrim BIOS image. Ensure that PSP verstage passes the address as expected by PSP. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8dc3aa4cb401d16a68da446f83eb9e68ee290fea Reviewed-on: https://review.coreboot.org/c/coreboot/+/65866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-20soc/amd/common/psp_verstage: Fix update_boot_regionKarthikeyan Ramasubramanian
On SoCs where PSP use A/B recovery layout, PSP expects PSP L2 directory address relative to the start of the SPI ROM. Unfortunately there is nothing in the EFS2 header to help identify such SoCs. Hence add a config item to statically identify such SoCs. Also when PSP uses A/B recovery layout, BIOS L2 directory is an entry in the PSP L2 directory. Hence the address of BIOS L2 directory is not part of EFS2 header. Thankfully PSP is able to identify the BIOS L2 directory itself and does not expect PSP verstage to pass the address. Modify PSP verstage to handle these updates. BUG=b:217414563 TEST=Build Skyrim BIOS image. Ensure that PSP verstage returned the PSP L2 directory as expected. Change-Id: I2f856a62055c80b8e2db91c983832611a5f0389c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-20soc/amd/sabrina: Do not dump CBMEM pre-bootblock contents to consoleKarthikeyan Ramasubramanian
PSP supports mapping FCH UART and verstage logs are visible in console. Hence pre-bootblock cbmem contents do not have to be dumped to console. BUG=b:238937687 TEST=Build Skyrim BIOS image. Ensure that PSP verstage logs in CBMEM are not dumped to console again during bootblock. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8336e372b894d8b2f9bbfb21ab15a78527dcc4c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-20soc/amd/sabrina, mb/google/skyrim: Call espi_switch_to_spi1_padsKarthikeyan Ramasubramanian
Skyrim uses second SPI pads for ESPI. Switch to it initialize ESPI in verstage. BUG=b:217414563 TEST=Build Skyrim BIOS image. Ensure that ESPI init is successful in PSP verstage. Change-Id: I6e3462e95c50d256b6c159ae1d854dd69a538bb0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-07-20vc/amd/fsp/sabrin/bl_uapp_header: Add SoC FW ID at the right offsetKarthikeyan Ramasubramanian
SoC FW ID needs to be populated at offset 0x58 and 0x59 in the PSP header. BUG=b:217414563 TEST=Build Skyrim BIOS image and ensure that PSP verstage is getting loaded. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ibe7b26aea0567e5337ee3e6e9447aa3944c55f5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/65860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-07-20treewide: Remove unused <cpu/x86/mtrr.h>Elyes Haouas
Change-Id: Ib852d0b2cf4d3cbdf7475bd5493bf2e585a5894a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-20treewide: Remove unused <cpu/x86/msr.h>Elyes Haouas
Change-Id: I187c2482dd82c6c6d1fe1cbda71710ae1a2f54ad Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-07-20mb/google/skyrim: Regenerate SPD part IDsKarthikeyan Ramasubramanian
Now that the speed is limited to 5500 Mbps for all memory parts used in Skyrim, regenerate the part IDs. Remove any custom generated part IDs and the associated SPDs. BUG=b:238074863 TEST=Build and boot to OS in Skyrim. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I6d8326208580a971e781887a7ec83355bb085c7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65709 Reviewed-by: Robert Zieba <robertzieba@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20soc/apollolake: Add CSE Firmware Status RegistersSean Rhodes
Add the CSE, General Status and Miscellaneous registers and print information from them accordingly. All values were taken from Intel document number 571993. Tested on the StarLite Mk III and the correct values are shown: [DEBUG] CSE: Working State : 2 [DEBUG] CSE: Manufacturing Mode : NO [DEBUG] CSE: Operation State : 1 [DEBUG] CSE: FW Init Complete : NO [DEBUG] CSE: Error Code : 3 [DEBUG] CSE: Operation Mode : 0 [DEBUG] CSE: FPF status : unknown Please note, the values shown are in an error state. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1a5548132dadbb188a33a7ae30a0a1fa144d130f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-07-20soc/intel/alderlake/fsp_params.c: Set DdrSpeedControl UPDFranklin Lin
When override "max_dram_speed_mts", set the DdrSpeedControl to manual. (0:Auto, 1:Manual) BUG=b:229549930 BRANCH=none TEST=build coreboot without error Signed-off-by: Franklin Lin <franklin_lin@wistron.corp-partner.google.com> Change-Id: Iffbbee8082fb1a41e0ed1db3f4ea9ec4709c9ce7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65877 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-20mb/google/brya/acpi: Add support for D Notify event from the Chrome ECTim Wawrzynczak
The agah EC code includes a driver to keep track of the current D Notify level that the GPU should be at. When it changes, it will send a host event to the ACPI FW, which will then pass that Notify on to the kernel driver. This patch adds support for that feature, which is described in the Nvidia Software Design Guide. BUG=b:229405562 TEST=add Printf() calls to the ACPI, and work through the various scenarios on the EC that will cause D Notify levels to change; this will cause the Printfs() to show up in the kernel log. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I5cd8bd7d177ea10a165613ed0726a6d6fd86c226 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Robert Zieba <robertzieba@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-20soc/intel/cmn/pch/lockdown: Guard gpmr_lockdown_cfgSean Rhodes
Guard gpmr_lockdown_cfg with SOC_INTEL_COMMON_BLOCK_GPMR so it doesn't run on platforms that don't select this. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iab5bbd399c3a654dcb95eaa8fce683a50c7322f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65227 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-20soc/intel/common/pch: Decouple CLIENT from BASEAngel Pons
In preparation to add a third option, have "Client" platforms select a dedicated Kconfig option instead of the common "_BASE" option. Rewrite the help texts to clarify what "Client" and "Server" mean, because the terms refer to the type of silicon and not to the market segment. Some uniprocessor (single-socket) servers are actually client platforms and there are some multi-socket workstations based on a server platform. Change-Id: I646729d709f60ca2b5e74df18c2b4e52f9b10e6b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-07-19vendorcode/intel/fsp: Add Raptor Lake FSP headers for FSP v3257_00_40Bora Guvendik
The headers added are generated as per FSP v3257_00_40. In the future, when Alder Lake and Raptor Lake fsp align, Raptor Lake fsp headers can be deleted and Raptor Lake soc will also use headers from alderlake/ folder. BUG=b:238791453 BRANCH=firmware-brya-14505.B TEST=none Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: If8fd6700f0afed7e2bd5d73a95407dbfd3e88abd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-07-19mb/google/nissa/var/craask: Change craask to use 16M SPI flashTyler Wang
BUG=b:236175568 TEST=Build and test on MB, system can boot to OS. Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: I779355dcc69eed08703bcb8bb943dcfeeb1fdea1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-07-19mb/google/brya/var/skolas: fix comment for I2C connectionsEran Mitrani
For brya/skolas, I2C1 is cr50, and I2C3 is Touchscreen BUG=None BRANCH=firmware-brya-14505.B TEST=None Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I4058e0f33b2bb6227a0af92941ed4e2eb56ba542 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-07-19cpu/amd: Reformat codeElyes Haouas
Most of these changes are suggested by clang-format(13.0-54) tool on Debian testing. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ie4fe0e872e94f38079945970848fefd153ab7cb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 05:09:01 +0000