| Age | Commit message (Collapse) | Author |
|---|
|
NOTE: Some code was currently left behind that may be
required for certain type of board reboots. A followup
patch will address this.
Change-Id: I3c1258b4e4dcf6fd04f57f5ab59cb1572a7d1fa3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch ensures that entire system memory calculation is done
based on host bridge registers.
BRANCH=none
BUG=b:63974384
TEST=Build and boot cannonlake RVP successfully with below configurations
1. Booting to OS with no UPD change
2. Enable ProbelessTrace UPD and boot to OS.
3. Enable PRMRR with size 1MB and boot to OS.
4. Enable PRMRR with size 32MB and boot to OS.
5. Enable PRMRR with size 2MB and unable to boot to OS due to
unsupported PRMRR size.
6. Enable C6 DRAM with PRMRR size 0MB and boot to OS.
Change-Id: I0a430a24f52cdf6e2517a49910b77ab08a199ca2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch uses smm common library function to get tseg base
address and size. Hence removing definitions of smm_region()
from soc directory.
BRANCH=none
BUG=b:63974384
TEST=Build and boot reef successfully.
Change-Id: I091ca90cf576c0da35cf3fe010f8c22a18ef82d9
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch uses system agent common library to
know tseg region start and size. Unable to remove smm_region()
function from soc code as SMM common library
is not yet available for skylake use.
BRANCH=none
BUG=b:63974384
TEST=Build and boot eve successfully.
Change-Id: If98b65805753db2c30d6fea29e401a17cef39799
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Do not assert GPIO1_B3 otherwise BT would be disabled on Nefario.
Also, remove DVS support for CENTERLOGIC.
BUG=b:64702054, b:63537905
TEST=build coreboot
Change-Id: I350db2c080f2e41ae56413f5f895557978ef0ba8
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/21176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: Ia65f9ecb62767424744e399a43e4728666fd28b3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Enabling XHCI is additionally controlled with Kconfig
option HUDSON_XHCI_ENABLE. Even when it is enabled,
it EHCI debug works on the USB port next to the
DVD drive door.
Change-Id: I83738da6015f58ecd0819c553d333a176365dc78
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21157
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I18c62ad034249c5ad14e5d5e708b4f0d4bcbf400
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Support code for Trinity and Richland is identical now.
I have also come across a unit with Trinity model CPU,
whose CPUID was not listed in f15rl while f15tn already
had support for f15rl.
Change-Id: Ia869429b75a9b308b4d4a84f16914ca629b1b1b5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/20773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
LLVM AS doesn't support as much GNU junk extensions, data16/32
is almost never needed in truth if we just use the correct op
suffix. So do that here, fixes clang/llvm builds with the
integrated-as toggled on.
Change-Id: I6095d03d0289b418a49a10f135de5eb0e117cae0
Also-by: Damien Zammit <damien@zamaudio.com>
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/21218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Id1ed36e7e76d25cdc9e86254b108deaca0f8b423
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I1b7d7c017a4dfd93c5befbc0d5858278eacc6c89
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Id3d9a365469f7d73788cad4095ec3495fc9baf3b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I2a6e53e5555a1b1e19c45a196b21f8505e275a76
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Ie4a735b156ded934fac0c9248fbb9042bf9be781
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I6dbcd23b0ea03b1b965d43346ae1cf7cf1971eb7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Ia22c96ee19babb3fc64d57966ea923eb5ec4b48f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I8438dc468e59174bd6f88c0c02b2fbf60587dbfd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This patch to avoid build bot hang issue due to no
active default value for UART_FOR_CONSOLE kconfig
option.
Change-Id: I70ca5dc6c4bde6a119ad59d8c58955c96c042198
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21287
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=b:64987428
TEST=Verified that touchscreen works on boot-up and after
suspend/resume. No power leakage via stop gpio in suspended state.
Change-Id: Ia260eb444081dbe1646c90e82c2725661e7306bc
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
There is at least one I2C device (being used by Soraka) that has 3
controls -- enable, reset and stop. If the stop gpio is not put into
the right state when turning off the device in suspend mode, then it
causes leakage. Thus, we need control in power resource to be able to
stop the device when entering suspend state.
BUG=b:64987428
TEST=Verified on soraka that touchscreen stop is correctly configured
on suspend.
Change-Id: Iae5ec7eb3972c5c7f80956d60d0d3c321bbefb0f
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21249
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We no longer use this touchscreen device, so get rid of it.
BUG=b:64987428
Change-Id: I67af787d231317a80998fb483eed5674de19aeb4
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21248
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Update cyan's SPD-related functions to more closely mirror
those of other Braswell boards, in order to simplify the upcoming
baseboard/variant setup for Braswell ChromeOS boards.
TEST: boot google/cyan, observe SPD correctly identified in
cbmem log, RAM-related data correct in SMBIOS tables.
Change-Id: Iafe99ec0795764f645e0a91f5b321be5b4c6fd88
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Replaces the ics/954309 driver with a more generic version to
accommodate clockgens with a different amount of registers.
It also features a mask to only touch certain bits of the clockgen.
TODO: set appropriate mask for X60/T60 since the datasheets for their
clockgens can be found.
Change-Id: Ie43c4de7891a39f2f443e78213ecd688134e68d7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch to add helper function to get SMM region start
and size based on systemagent common library.
BRANCH=none
BUG=b:63974384
TEST=Build and boot eve successfully.
Change-Id: If10af4a3f6a5bd22db5a03bcd3033a01b1cce0b4
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch to add helper function to get tseg memory base and
size for HW based memory layout design.
BRANCH=none
BUG=b:63974384
TEST=Build and boot eve successfully.
Change-Id: I4c8b79f047e3dc6b2deb17fdb745f004004526b6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch ensures coreboot can set PRMRR size and C6DRAM
enable FSP-M UPDs.
Change-Id: I61ec3b6a16e20526516f681ddc3c70755724ed8a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a 16ms delay to DMIC init by the kernel driver in order to
prevent an audible 'pop' noise when starting to record.
BUG=b:63413023
TEST=manual testing to ensure this device property is present in SSDT:
Name (_DSD, Package () {
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
Package () {
Package () {
"realtek,dmic-init-delay",
0x10
}
}
})
Change-Id: If9160ce6992153ba49719029de336595bbf4ae72
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/21271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for providing additional free form device properties via
devicetree in order to make this driver suitable for kernel drivers
that need additional board-specific device properties.
This currently allows adding up to 10 additional properties to a device.
BUG=b:63413023
TEST=manual testing to ensure that newly added properties are in SSDT
Change-Id: I2b8ceb208f4aba01053746547def6d07c8f8f3a2
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/21270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide a new function that will allow adding arbitrary properties
to devicetree entries without needing a custom driver for the device.
This will allow the 'generic i2c' driver to support kernel drivers
that need additional device properties exposed and have those board
specific properties set with values from devicetree.
BUG=b:63413023
TEST=not used yet, compiles cleanly
Change-Id: Id272256639a8525406635e168a3db5ab1ba4df6b
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/21269
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On platforms with a PCH, some registers within host bridge should be
locked down on each normal boot path (done by either coreboot or
payload) and S3 resume (always done by coreboot).
A function to perform such locking is implemented in src/northbridge/
intel/*/finalize.c, and is designed as the handler of an #SMI triggered
with outb(APM_CNT_FINALIZE, APM_CNT), but currently this #SMI is only
triggered during s3 resume, and not on normal boot path. This problem
has beed discussed in
https://mail.coreboot.org/pipermail/coreboot/2017-August/084924.html .
This time, an option "INTEL_CHIPSET_LOCKDOWN" within src/southbridge/
intel/common/Kconfig is added to control the actual locking, which
depends on several compatibility flags, including
"HAVE_INTEL_CHIPSET_LOCKDOWN".
In this commit, "ibexpeak", "bd82x6x", "fsp_bd82x6x", and "lynxpoint"
have the flag "HAVE_INTEL_CHIPSET_LOCKDOWN" selected.
The change is only well tested on Sandy Bridge, my Lenovo x230.
Change-Id: I43d4142291c8737b29738c41e8c484328b297b55
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The EC side of the feature bits in ACPI EC space isn't stable yet, and
we're now going for matching them up with the EC host command of the
same purpose.
Change-Id: I9c1f0e5390e840ea0c32315a3da8eea6f3e12f54
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/21193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Never selected in our tree.
Change-Id: I5065903ebf74d281ecccaf53e0cc9fa24317e1cd
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We never had a board in the tree that implements this.
If you are interested in implementing such board, note
that also f12 and f14 had copies of the same refcode.
As part of the sourcetree cleanup it was not studied
which was the most up-to-date one for AM3r2.
Change-Id: Ic7dd065c0df08c22af6f3a2dcfc7ff47d6283a46
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The only subtree we build is /ON.
Change-Id: I8cb11211a2a5ab7d8ae6296b601ee09146a9c9f8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The only subtree we build is /LN.
Change-Id: I035932a4be41fa0451a3f3c7be33442afeeb5571
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These files were never built in our tree.
Furthermore, AMD_INIT_RECOVERY was already deprecated
in AGESA spec rev 2.20 from Dec 2013.
Change-Id: Ifcaf466ca0767bf7cfa41d6ac58f1956d71c7067
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
"pcie_port_coalesce" will cause pcie being remapped under certain
conditions, but flags within "pcie_hotplug_map" should be updated
along with ports.
Test on my lenovo t430s.
Change-Id: I28c4eaf82fb52fe793dfa2f824f14686b80951ad
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21178
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the
frequency does not exceed 400KHz.
BUG=b:35948024
TEST=Verified for 25 iterations that the frequency on each bus ranges
<= 400KHz.
I2C0: 393 - 397
I2C1: 393 - 400
I2C2: 392 - 400
I2C4: 392 - 400
I2C5: 392 - 400
Change-Id: I3e12c75eb7e82a83aa6a6bcfcc11c12f83f2d3d4
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Add return in case of null pointer to avoid coverity scan error, fixed
1.Coverity ID 1379849: Null pointer dereferences (FORWARD_NULL)
2.Coverity ID 1379848: Null pointer dereferences (FORWARD_NULL)
Change-Id: Ica19735307736c8a55c29af88db8b1372f8779e4
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/21155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
This is a bug introduced by this commit:
stoneyridge: Fix CPU ASL \_PR table [commit I870f81]
The following error is found in dmesg
ACPI Error: [\_PR_.P000] Namespace lookup failure, AE_NOT_FOUND...
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog...
ACPI Exception: AE_NOT_FOUND, (SSDT:AGESA ) while loading table...
ACPI Error: 1 table load failures, 3 successful...
...
acpi-cpufreq: overriding BIOS provided _PSD data
And, "ls -la /sys/devices/system/cpu/cpufreq/" doesn't work
The cause is that the Pstate SSDT table generated by AGESA expects CPU
variables \_PR.Pxxx, not \_PR.CPxx as generated by coreboot.
Use Kconfig to set the required string.
BRANCH=none
BUG=b:64885241
TEST= Check dmeg and ls -la /sys/devices/system/cpu/cpufreq/
Change-Id: I4929f9a1c39705c6df9d965c8d030f4d1f0b5e5f
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/21165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a Kconfig option to change the \PR.CPxx name string. This
provides some flexibility when working with table not generated
by coreboot.
Change-Id: Ibc0c56783c6da80501e2177de96a414b592cb74f
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/21210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
TESTED on Lenovo T400
Change-Id: I365aeb7e997def225c23d3287558bdc4eefa4298
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/21230
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current coreboot does not create ACPI device for OS to recognize Raydium
touchscreen.
List the touch screen in the devicetree so that the correct ACPI device
are created.
BUG=b:64705535
BRANCH=master
TEST=emerge-coral coreboot
Change-Id: Ifdea897ef66dd10f29a8a0e72f9406d316fbe8c7
Signed-off-by: Pan Sheng-Liang <Sheng-Liang.Pan@quantatw.com>
Reviewed-on: https://review.coreboot.org/21233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The guards in the header files were inconsistent. Some had no leading or
trailing underscores, some had one, some had both leading and trailing.
Change all to double leading & trailing underscores.
Change all comments to have a space before them instead of tabs
BUG=b:62235990
Test=Build Kahlee
Change-Id: I4466df529ab201c922096a31d7438381778b582f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
What is present is APIC and legacy interrupt routing and the soft-off sleep
state. Other sleep states are missing, so are the SuperIO devices.
Boots Linux with and without "noapic" and a Windows XP (installed with
factory BIOS, the installer reportedly requires legacy keyboard).
Change-Id: Iee3ede8683d1ea51317228d4f782af27043cc945
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Initialize IRQ routing for legacy non-PNP OSes the same as the factory
firmware would do.
Change-Id: I0c7a7d584a2c47471456ab54ef6da815a2dc4e7c
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I0d7aba827fb87f69f542edd2f7ac7a66d949f865
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
G170 is a board manufactured by WinNET, used in thin clients including
HP Neoware CA19 and IGEL 2110.
Copied from mainboard/bcom/winnetp680 which seems to be a similar
board with an extra PCI slot.
The p680 should probably be moved to winnet/ too, since the board is an
OEM WinNET board, with BCom being just a machine that happens to it.
Change-Id: I90b89ee634d90cfba2e56cca5b76cfd2bd7a8d0b
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Includes objects for interrupt links, the LPC bridge and interrupt
routing tables for the internal devices for both APIC and legacy
modes.
The default routing tables only includes peripherals internal to the
VT8237R, if a mainboard has PCI slots (mine does not have), it needs to
supply its own routing table.
Change-Id: I3a0cdafc19159fe6c38e4dde08ad0bf2bd0dd6b8
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Increase the default setting to add more CAR space for the early
console. This avoids truncation of the log.
BUG=b:64980233
Change-Id: Ia11d1c6c186a7025510c240206743ebe8d741461
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21186
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove obsolete code. The same settings are always done in southbridge.
Change-Id: Ic893ddbace73ae8b122c4fb675febc7d1e0b5da9
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Never selected in our tree. The vendorcode source
for fam15 also includes fam10 support if required.
Change-Id: Ifff328ecdd8afa988f844b6fd631818b51bd5b5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Vendorcode for f15 also has f10 support, so
AMD_AGESA_FAMILY_10 was never selected.
Change-Id: I9a026c36ace88f1110a52d7e24d3e6ab36508932
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Files themselves were never committed.
Change-Id: I41ebdd98c10b6a80f8e110fb265203a5d06072ef
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I08ee5a6c50d7eee2c39df326a6c6acd40212f093
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I5a9ff6eae3940d70edaf551a9d37d3d1464fbd31
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We never had a board in the tree that implements this.
Change-Id: Idce32a20c24e31eb52f8509d4a7cccfc24cf17cf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These fam10 sources under fam12 and fam14 were never built.
Change-Id: Iff0964aba0a061b43144427388c07aea57d6d566
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch ensures skylake device using FSP1.1 can use HW based
DRAM top calculation which was broken due to skylake fsp1.1 not
honoring any UPD to know PRMMR size and default reserving 1MB for PRMRR size.
This WA is not needed for FSP2.0 implementation due to
PrmrrSize UPD is available and considering into hw based dram top
calculation.
BRANCH=none
BUG=b:63974384
TEST=Build and boot lars which is using skylake 1.1 fsp.
Change-Id: Iade0d2cb2a290fc4c9f0e6b1eaadc8afff2fa581
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Tune I2C params for I2C buses 0, 1, 2, 4 and 5 to ensure that the
frequency does not exceed 400KHz.
BUG=b:35948024
TEST=Verified for 25 iterations that the frequency on each bus ranges
<= 400KHz.
I2C0: 375 - 400
I2C1: 377 - 400
I2C2: 377 - 400
I2C4: 375 - 397
I2C5: 375 - 397
Change-Id: Ie30e1a12b66c4660b648a585c4dfd66faf004129
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21208
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This problem was introduced in:
12a4e98cea nb/intel/pineview/raminit: Refactor timings selection
Change-Id: Iace3dabb8546d7a721ef13526ba02522dc712fdd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add critical and passive threshold to be advertised in thermal zone 0.
Change-Id: Ic75a80994b27ac19651ed52b7fc3c00c65cd9c01
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add support for board specific critical and passive
limits using GNVS table. Use default values if no
board specific limit exists.
* Add ACPI methods _TZP, _TSP and _PSV.
* Update ACPI method _CRT to use board specific if available.
Tested on Lenovo T500.
Change-Id: If438a909f4415f50cd7a764fb5fba7ec29599606
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Rename register to match recent intel models.
Required for Lenovo H8 to operate on all generations.
Change-Id: I48a869adb1da2e33156968c4b7597edf99902c1a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21158
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch to ensure that coreboot is able to store memory
training data into SPI and perform platform lockdown after
PCI enumeration is done before handing over control to
NotifyPhase() - Post PCI enumeration.
Modified coreboot bootstate execution order below:
BS_DEV_ENUMERATE - BS_ON_EXIT - Store Memory training data into SPI
BS_DEV_RESOURCES - BS_ON_EXIT - Platform Lock Down after PCI enumeration
BS_DEV_ENABLE - BS_ON_ENTRY - NotifyPhase() post PCI enumeration
TEST=Please find test case and results for Chrome Devices as Apollolake- Reef,
Kabylake-Eve and Poppy and Non Chrome Devices with Yocto OS.
1.
Without patches
Cold Boot
MRC: no data in 'RW_MRC_CACHE'
...
MRC: Checking cached data update for 'RW_MRC_CACHE'.
SF: Detected FAST_SPI Hardware Sequencer with sector size 0x1000, total 0x1000000
MRC: no data in 'RW_MRC_CACHE'
MRC: cache data 'RW_MRC_CACHE' needs update.
MRC: NOT enabling PRR for 'UNIFIED_MRC_CACHE'.
Warm Reboot from Chrome CMD Line: $ reboot
MRC cache found, size 18c8 bootmode:2
...
MRC: Checking cached data update for 'RW_MRC_CACHE'.
SF: Detected FAST_SPI Hardware Sequencer with sector size 0x1000, total 0x1000000
MRC: NOT enabling PRR for 'UNIFIED_MRC_CACHE'.
Suspend Stress from Chrome CMD Line: $ echo mem > /sys/power/state
MRC cache found, size 18c8 bootmode:17
...
MRC: Checking cached data update for 'RW_MRC_CACHE'.
SF: Detected FAST_SPI Hardware Sequencer with sector size 0x1000, total 0x1000000
MRC: NOT enabling PRR for 'UNIFIED_MRC_CACHE'.
2.
With patches
Cold Boot
MRC: no data in 'RW_MRC_CACHE'
...
MRC: Checking cached data update for 'RW_MRC_CACHE'.
SF: Detected FAST_SPI Hardware Sequencer with sector size 0x1000, total 0x1000000
MRC: no data in 'RW_MRC_CACHE'
MRC: cache data 'RW_MRC_CACHE' needs update.
MRC: NOT enabling PRR for 'UNIFIED_MRC_CACHE'.
Warm Reboot from Yocto CMD Line: $ reboot
MRC cache found, size 18c8 bootmode:2
...
MRC: Checking cached data update for 'RW_MRC_CACHE'.
SF: Detected FAST_SPI Hardware Sequencer with sector size 0x1000, total 0x1000000
MRC: NOT enabling PRR for 'UNIFIED_MRC_CACHE'.
Suspend Stress from Chrome CMD Line: $ echo mem > /sys/power/state
MRC cache found, size 18c8 bootmode:17
...
MRC: Checking cached data update for 'RW_MRC_CACHE'.
SF: Detected FAST_SPI Hardware Sequencer with sector size 0x1000, total 0x1000000
MRC: NOT enabling PRR for 'UNIFIED_MRC_CACHE'.
Tested the patches more thoroughly, from the S5->S0, S3->S0 bootlog there
is no noticeable difference.
On a reboot, suspend resume from Chrome console, the mrc cache is found,
and utilized.
Change-Id: I4cb4eac5256c1ce98f51adad0be6e69f7d05d8e1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch to ensures that coreboot is performing SPI
registers lockdown after PCI enumeration is done.
This requirements are intended to support platform security
guideline where all required chipset registers are expected
to be in lock down stage before launching any 3rd party
code as in option rom etc.
coreboot has to change its execution order to meet those
requirements. Hence SPI lock down programming has been moved
right after pci resource allocation is donei, so that
SPI registers can be lock down before calling post pci
enumeration FSP NotifyPhase() API which is targeted to
be done in BS_DEV_ENABLE-BS_ON_ENTRY.
TEST=Ensure SPIBAR+HSFSTS(0x04) register FLOCKDN bit and WRSDIS
bit is set. Also, Bits 8-12 of SPIBAR+DLOCK(0x0C) register is set.
Change-Id: I8f5a952656e51d3bf365917b90d3056b46f899c5
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/21064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Now that there is a handy macro utilize it.
Change-Id: I560bc7a591075235229952cdea63d4e667f323ee
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch to ensures that coreboot is performing DMI
registers lockdown after PCI enumeration is done.
This requirements are intended to support platform security
guideline where all required chipset registers are expected
to be in lock down stage before launching any 3rd party
code as in option rom etc.
coreboot has to change its execution order to meet those
requirements. Hence BIOS Interface lock down through Sideband
access has been moved right after pci resource allocation is done,
so that BILD lock down is getting executed along with LPC and SPI
BIOS interface lockdown settings before calling post pci
enumeration FSP NotifyPhase() API which is targeted to
be done in BS_DEV_ENABLE-BS_ON_ENTRY.
TEST=Ensure DMI register offset 0x274c bit 0 is set.
Change-Id: Ie66701d5bd8c8f389e23fb30c8595dd83cf6b1ae
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I6ad0c4cf2f0398f0b1efac1282822acf0d4a3610
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I706de64ae5d940df70701c8b9dd717f8e212cd0e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I09fe0e903a1241212f81e2a897898356a7e372a9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Id2ef3e5aa0ea3f6e714eda6d9dbdf62fb96c0a74
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie76291a8e227e49aae6fc6339cec2009ebd67fff
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ib386b5d9ba636614016c3f9ac042fee43eac53f2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I6ad99af55975b21b0a7671553246cdb5a1e19091
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I26e2450babfde1580e0e794c519344112d4019ee
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I10b3e53a5e39764e3b199561d07391779804407c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The LED polarity was set incorrectly, fix using values derived
from original Chromium sources:
branch firmware-mccloud-5827.B, ToT
src/mainboard/google/mccloud/smihandler.c
src/mainboard/google/mccloud/romstage.c
TEST: boot google/mccloud, observe power LED on normally,
blinking in S3/S4, and off in S5.
Change-Id: Ia1f63eebbccb48fcf8543188db390b23045d843e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Commit 05627831826cab096789bd19f004b33a4cd70c0e applied
this change to other Google boards, but cyan was left out.
Bring cyan in line with other Google boards.
Change-Id: Id86bea538a7b82367ea6ddbd3fe3efb1b1c0078d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Cleaning up code to remove support for pre-EVT rev of cyan board.
Analogous to what was done for intel/strago in commit 103f00d.
Change-Id: I29b32da8064e0743cc9c5df02ce7d3441459ee8f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit a162348.
Remove the hard coded IRQ number for the keyboard interrupt.
IRQ number can change based upon the gpio bank index ordering.
Hence pass the gpio bank and index number so that kernel calculates
the IRQ number.
Original-Change-Id: Icfe5c3995007164bf617575b541758c18ee63a1d
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I81ff19e3060c533ee76023c7651f741294e9db30
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adapted from Chromium commit dc59188.
Disable L1 sub state to prevent WiFi randomly disappear condition.
Original-Change-Id: I8975bb4bbbc2fc89b91b06ae02716367890c672d
Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com>
Original-Reviewed-by: Rajat Jain <rajatja@chromium.org>
Original-Reviewed-by: Vincent Wang <vwang@chromium.org>
Oriignal-Tested-by: TH Lin <t.h_lin@quanta.corp-partner.google.com>
Change-Id: I51a1bcca6431e6bc28baf9b09433cec13db925c3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21174
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit 1568761.
Original-Change-Id: If459c3cab8fb7ca13d8bff3173a94855ec2e2810
Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Kevin K Wong <kevin.k.wong@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@google.com>
Original-Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Change-Id: Ibb2e6d316adcfcc0d56d242501aac9c4c0bbdf62
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit f92d7be.
This BAR is used in _PS0 and _PS3 methods and is used by kernel driver to put
SD controller in D3
Original-Change-Id: Iae4722cb222f61e96948265f57d6b522065853d9
Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@google.com>
Original-Tested-by: Aseda Aboagye <aaboagye@chromium.org>
Change-Id: I59973226d57fe1dc3da21b2cec1c7b9a713829ab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit 7f0cdf0.
Cyan board add 4G DDR3L 2nd source memory (Micro/Samsung)
Original-Change-Id: I12f82082d8227e61a97ce0a001d7d2b1f6613e06
Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Change-Id: Ieca7201346414d7a962f9619dbe846c67c0f02d6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit 3b578ef.
Cyan board use new 2nd source memory (Micro/Samsung)
Original-Change-Id: I6f4e8438faede7ac742776a622c265922e498898
Original-Signed-off-by: T.H. Lin <T.H_Lin@quantatw.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Change-Id: Ie2febe4de57c00c269def15d57f2b5a6f0f378aa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit 1138727.
Elan touchscreen driver expects the first gpio resource in asl
to be the reset line.
The driver considers the gpio based irq line as reset gpio resource
and changes the direction to output.
This will cause irq registration to fail.
Solution is to pass Interrupt resource for touchscreen irq
instead of GpioInt.
Original-Change-Id: Ia72d4ad80117f3c0014098113c9027416026e65e
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I1c4b029851e321feeedf713186976fbec42dd82e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit e49deb1.
Configuring UPD PcdCaMirrorEn. This is a board specific parameter.
CA mirror is the Command Address mirroring option that is board
specific.
Original-Change-Id: I05174e18d650332d838e5036c713e91c4840ee75
Original-Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Change-Id: Ibd0c811d41cb592634f7785edb83ad2f423546c5
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit 1940eb6.
The unused lines leads to spurious interrupts on few of the systems.
Original-Change-Id: Ie539e1debc15dd1fd8707f8866c65714fc43e44b
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Bernie Thompson <bhthompson@chromium.org>
Original-Tested-by: Bernie Thompson <bhthompson@chromium.org>
Change-Id: I6f4f7cec8ef11e781c66b6efff4188259469e41c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium 2b51633.
Disable unused PCI devices. Update PCI DeviceID.
Original-Change-Id: I34fa6e25f9178de959aad30cc979d787cf76b8ad
Original-Signed-off-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7a06a1d44ce933000cbfe2eb71823ee66cb46a34
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cherry-pick from Chromium commit 8f63720.
SoC GPIO to read Memory strap not getting configured
correctly causing incorrect RAMID read during ROMSTAGE
TEST=Build and boot the platform with differnt Memory type and
read RAMID correctly inside spd.c
RAMID = 0 => 4GB Samsung Memory
RAMID = 1 => 4GB Hynix Memory
RAMID = 2 => 2GB Samsung Memory
RAMID = 3 => 2GB Hynix Memory
Original-Change-Id: Ide9d4b5f73565cddd74cedf7afe4b7d168dde74c
Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: If2ba9ec5be111b9c30360ffde41a2c644a69ecae
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Needed for to-be-added Google Braswell boards which make use
of common GPIO library function to determine installed RAM type.
Change-Id: Ie9b0c6513f10b252bf0a5014bd038d24879421be
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Set SMBus, SAGV and Skip FSP MPInit configuration from devicetree.cb
Change-Id: Ic810b003bf7fb13447d5d5dcd49cfcc31785b440
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Initialize UPD params based upon config
Change-Id: Ib2ee58f8432a957ef389b40f717533e4cfe774b9
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21175
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP is doing TCO lock inside Post PCI bus enumeration
NotifyPhase(). Hence remove TCO Lock down programming
from coreboot.
TEST= Ensure TCO_LOCK offset 8 bit 12 is set.
Change-Id: Iec9e3075df01862f8558b303a458126c68202bff
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21031
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a function in FAST_SPI library to discrete lock the PR
registers 0 to 4.
BUG=none
BRANCH=none
TEST=Build and boot poppy
Change-Id: I46e1948315ea9489932efdf7d60d6d78ab3948a6
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/21063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch to ensures that coreboot is performing PMC
registers lockdown after PCI enumeration is done.
This requirements are intended to support platform security
guideline where all required chipset registers are expected
to be in lock down stage before launching any 3rd party
code as in option rom etc.
coreboot has to change its execution order to meet those
requirements. Hence PMC register lock down has been moved
right after pci resource allocation is done, so that
PMC registers can be lock down before calling post pci
enumeration FSP NotifyPhase() API which is targeted to
be done in BS_DEV_ENABLE-BS_ON_ENTRY.
TEST=Ensure PMC MMIO register 0xC4 bit 31 is set.
Change-Id: Ibd86a38fa78752ce007da63a9ccdd991ca21ab92
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP is doing PMC ABASE lock inside Post PCI bus enumeration
NotifyPhase(). Hence remove ABASE Lock down programming
from coreboot.
TEST= Ensure GEN_PMCON_B offset 0xA4 bit 17, 18 is set.
Change-Id: I800e654c7d8dc55cc0e8299501c1f85c57882e9d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21201
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch to ensures that coreboot is performing LPC
registers lockdown after PCI enumeration is done.
This requirements are intended to support platform security
guideline where all required chipset registers are expected
to be in lock down stage before launching any 3rd party
code as in option rom etc.
coreboot has to change its execution order to meet those
requirements. Hence lpc register lock down has been moved
right after pci resource allocation is done, so that
lpc registers can be lock down before calling post pci
enumeration FSP NotifyPhase() API which is targeted to
be done in BS_DEV_ENABLE-BS_ON_ENTRY.
TEST=Ensure LPC register 0xDC bit 1 and 7 is set.
Change-Id: I705a3a3c6ddc72ae7895419442d67b82f541edee
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
