| Age | Commit message (Collapse) | Author |
|---|
|
Update DFP port setting for retimer power GPIO
BUG=b:302428013
BRANCH=none
TEST=Retimer enumaration in NDA works.
Change-Id: Idc1a728ec4cbb66e776c2700025db41d85801c60
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
That select is duplicate to the ones in the Kconfig file, and it
shouldn't be there anyway. Remove it.
Change-Id: I1a940f034a69f72280d15ab9a0c9d83f8111910e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78973
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Later GSCs don't need a EC_IN_RW GPIO anymore, so removing the use of
this for get_ec_is_trusted().
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I29f94969e9f2c1f239d9f9655f39b8410296f695
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Having a separate romstage is only desirable:
- with advanced setups like vboot or normal/fallback
- boot medium is slow at startup (some ARM SOCs)
- bootblock is limited in size (Intel APL 32K)
When this is not the case there is no need for the extra complexity
that romstage brings. Including the romstage sources inside the
bootblock substantially reduces the total code footprint. Often the
resulting code is 10-20k smaller.
This is controlled via a Kconfig option.
TESTED: works on qemu x86, arm and aarch64 with and without VBOOT.
Change-Id: Id68390edc1ba228b121cca89b80c64a92553e284
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55068
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
There's no reason to name this choice block. Remove the name.
Change-Id: Iebf8b1e7af928b988ab514d9dd85d2e70bf00c09
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78917
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add FW_CONFIG probe to separate WFC settings.
WFC_PRESENT/WFC_ABSENT
Add FW_CONFIG probe for new DB_USB sku.
DB_C_A_LTE/DB_A
BUG=b:303526071
TEST=emerge-nissa coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I93e0bce4b8be37e259efe0d7b0185035b3e88785
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78963
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DDI on ports 1 to 4 for Type-C DisplayPort.
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I3acaff4a9306f2d058ce9542e8956ee0acba94cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78498
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As TOUCHSCREEN_I2C_SPI will be used for two different configurations,
splitting it to TOUCHSCREEN_GSPI and TOUCHSCREEN_THC, and re-order
the FW_CONFIG bits by moving VPU to different bit position.
BUG=b:307774932
TEST=build and boot rex
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Ied4d732ef7993e95edbb7eb281842b9392e72820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Some GPIOs (like WP and GSC) need to be configured in bootblock.
Making sure that they get configured earlier for this.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I8dd4853bc05b954f47d858d87ea2aed48e4b8074
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78943
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are some inaccuracies in arbitrage. This is the first pass at
correcting the incorrectly generated configs. I also tried to update
the "No heuristic was found useful" comment generated by arbitrage
into something more useful (ie: the appropriate NFs).
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I836565e09a3e0b25746b3e2f9ed6610eaacf7e97
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78942
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Initialise overridetree based on the schematics revision 20231020A.
Added data.vbt just only for running abuild completed.
Real vbt define by CONFIG_INTEL_GMA_VBT_FILE in chromium:4936896.
BUG=b:304920262
TEST=abuild -v -a -x -c max -p none -t google/brya -b anraggar
Change-Id: I232bde990747be80e1ab62c3f0d010d5fc854cb5
Signed-off-by: wuweimin <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78456
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure GPIOs according to schematics revision 20231025G.
BUG=b:304920262
TEST=abuild -v -a -x -c max -p none -t google/brya -b anraggar
Change-Id: I7be6829fc27ee20e014c372d704333ebfd4967b8
Signed-off-by: wuweimin <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This achieves the same without the strconcat & free dance.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4d8e9bae6085a6e05847b01497fb4b51041ca7b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78946
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The coreboot_version global variable just gets filled with the
COREBOOT_VERSION macro so there is no reason to use a runtime strconcat.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I3a2be7293d07ac591855ebd784bba350cdffa70f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78945
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Setting EC SLPT bit in S5 will make HP EliteBook 820 G2
fail to reboot under Linux 6.1 and later kernel versions.
Change-Id: I48f5a35cd78db3b32d9f76cb8e266c738da34e7c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Now that VBOOT_CBFS_INTEGRATION exists, it is possible to use
TOCTOU_SAFETY with VBOOT.
Change-Id: I9f84574f611ec397060404c61e71312009d92ba7
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78915
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When the FMAP cache is enabled, it cannot fail in pre-RAM stages unless
flash I/O in general doesn't work. Therefore, it is unnecessary and a
waste of binary size to also link a fallback path for this case.
Similarly, once the cache is written to CAR/SRAM/CBMEM there should be
no way for it to become magically corrupted between boot stages. Many
other parts of coreboot blindly assume that persistent memory stays
valid between stages so there is no reason why this code should link in
extra fallback paths in case it doesn't.
This saves a little over 200 bytes per affected (uncompressed) stage on
aarch64.
Change-Id: I7b8251dd6b34fe4f63865ebc44b9a8a103f32a57
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78904
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A recent security audit has exposed a TOCTOU risk in the FMAP
verification code: if the flash returns a tampered FMAP during the first
setup_preram_cache(), we will abort generating the cache but only after
already filling the persistent CAR/SRAM region with the tampered
version. Then we will fall back into the direct access path, which could
succeed if the flash now returns the original valid FMAP. In later
stages, we will just use the data from the persistent CAR/SRAM region as
long as it looks like an FMAP without verifying the hash again (because
the hash is only linked into the initial stage).
This patch fixes the issue by just calling die() immediately if FMAP
hash verification fails. When the verification fails, there's no
recourse anyway -- if we're not dying here we would be dying in
cbfs_get_boot_device() instead. There is no legitimate scenario where
it would still be possible to continue booting after this hash
verification fails.
Change-Id: I59ec91c3e5a59fdd960b0ba54ae5f15ddb850480
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78903
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The rarely-used fallback path for accessing the FMAP without a cache
currently only maps the FMAP header for the initial verify_fmap() call.
This used to be fine when we were just checking the magic number, but
with CBFS verification we may need to hash the entire FMAP.
Since this path is so rarely used anyway and the size difference only
has a practical impact on a few platforms, lets keep things simple and
just always map the whole FMAP.
Change-Id: Ie780a3662bf89637de93a36ce6e23f77fed86265
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78914
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
+-------------+----------------+------------+
| USB 2.0 | Connector Type | OC Mapping |
+-------------+----------------+------------+
| 1 | Type-C | OC_0 |
+-------------+----------------+------------+
| 2 | Type-C | OC_0 |
+-------------+----------------+------------+
| 3 | Type-C | OC-0 |
+-------------+----------------+------------+
| 4 | Type-A | OC_3 |
+-------------+----------------+------------+
| 5 | Type-C | OC_0 |
+-------------+----------------+------------+
| 6 | Type-A | OC_3 |
+-------------+----------------+------------+
| 7 | Type-A | OC_3 |
+-------------+----------------+------------+
| 8 | Type-A | OC_3 |
+-------------+----------------+------------+
| 9 | Type-A | OC_3 |
+-------------+----------------+------------+
| 10 | BT | NA |
+-------------+----------------+------------+
+---------------------+-------------------+------------+
| USB 3.2 Gen 2x1 | Connector Details | OC Mapping |
+---------------------+-------------------+------------+
| 1 | Type-A | OC_3 |
+---------------------+-------------------+------------+
| 2 | Type-A | OC_3 |
+---------------------+-------------------+------------+
+------+-------------------+------------+
| TCPx | Connector Details | OC Mapping |
+------+-------------------+------------+
| 1 | Type C port 0 | OC_0 |
+------+-------------------+------------+
| 2 | Type C port 1 | OC_0 |
+------+-------------------+------------+
| 3 | Type C port 2 | OC_0 |
+------+-------------------+------------+
| 4 | Type C port 3 | OC_0 |
+------+-------------------+------------+
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I743fd82f088a57e906b8b9d0fe2e012d9c5f9567
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78497
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Change-Id: I167a02bf2219c6ef8e0093956a649305c8e8f76b
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add I2C config based on Deku schematics.
TPM is connected to I2C 4
BUG=b:305793886
TEST=util/abuild/abuild -p none -t google/rex -x -a -b deku
Change-Id: I496e236531b2b59b320c77c36f542f4fa80a51a1
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78449
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add RAM id for:
MT62F2G32D4DS-026 WT:B (Micron)
BUG=b:305793886
TEST=Run part_id_gen tool without any errors
Change-Id: If2ed2bdcee44f6dbbda51a3ff484edaf3df4830d
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Drop the hda_soc_ssdt_quirks function since it doesn't apply for any of
the SoCs supported by the Stoneyridge code which was the only SoC
implementing it. This code was added when commit 91a7abf25c72
("soc/amd/hda: Move HDA PCI device from DSDT to SSDT") rewrote the code
originally added in commit 1587dc8a2b4d ("soc/amd/stoneyridge: Add
northbridge support") as a copy from northbridge/amd/pi/00670F00. This
code was moved around in commit 6580408a7e0a ("amd/pi/hudson: Move audio
to northbridge"), since the HDA controller was moved from the FCH to the
northbridge complex. When the controller was moved, the PCI config space
interface also changed, so those bits are no longer the DisableNoSnoop,
DisableNoSnoopOverride, and EnableNoSnoopRequest bits of the Misc
Control register of the HDA controller, but some bits within the
ClassCodeW field of the ACGAZ Mirrot Reg Ctrl 0 register.
BKDG #55072 Rev 3.04 (Stoneyridge), BKDG #50742 Rev 3.08 (family 15h
model 60h-6fh / 00670F00), and BKDG #52740 Rev 3.05 (family 16h model
30h-3fh) were used as a reference. Only the SoC with BKDG #52740 still
has the HDA controller in the FCH; the other two have it in the
northbridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I77fc76752b1c7de62ba8a196f15c198f55be3074
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78940
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 44a48ce7a46c36df69f7b2cf3552bf10fa5f61b6.
Reason for revert: It breaks wakeup from suspend on a bunch of boards.
While this approach of eyeballing "correct" values by chipset _should_
be fixed, it should also be accompanied by compile time verification
that the memory map works out.
Since nobody seems to care enough, let's just revert this, instead of
keeping the tree broken for a bunch of configurations.
Change-Id: I3cd73b6ce8b15f06d3480a03ab472dcd444d7ccc
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78850
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Now VBOOT is always assumed to run after romstage and be linked inside
romstage. This currently is the case but for flexibility reasons (e.g.
linking romstage into bootblock or having a verstage before romstage)
this could be more precise.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I361731c930a35e12245153920df1b6884d47064c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
A .data section now exists.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic1510221582aca91c814d43f522a8fb6cba05921
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78937
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code was written in a romcc bootblock time. There is no reason why
it would not work in bootblock now.
Untested but expected to work.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I34812fbcd1222eceeb9870b9cbb7431ead63ce6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78936
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code was written in a romcc bootblock time. There is no reason why
it would not work in bootblock now.
Untested but expected to work.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4113dc3208fe15305d1132136dd33417dd086bfb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This code was written in a romcc bootblock time. There is no reason why
it would not work in bootblock now.
Untested but expected to work.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I708e8a3b503eb3a7fdf6063803d666529096f651
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This is a RW mirror of AMD's openSIL for Genoa with additions from
Arthur Heymans.
- origin/openSIL/main from
https://github.com/openSIL/openSIL.git
- origin/ArthurHeymans/64b_public from
https://github.com/ArthurHeymans/openSIL.git
The current main branch starts with Arthur's branch and adds 5 commits
from the AMD's openSIL repo.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8917edf3a6a8493ffa9230902cafcc6234d3d571
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9fc155fe76c05fefd4ce31ae6b96dcc4527b6abc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0eae9e4d246bd07f43b1d77e5ad7649c010d0efe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8dc93b12b81abee41f6f225f41d1f9953d1d93e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
All base addresses of MMIO devices in the devicetree should also have
corresponding defines in iomap.h. PPR #55901 Rev 0.26 was used as a
reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0444e6cc0587b484a4a1ff49fa4b1540a24c8e80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78897
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The base addresses of I2C 5 and I3C 3 were wrong and all I3C controllers
should use the base address of the 4kiB block where all registers of
that I3C controller are located in. PPR #55901 Rev 0.26 was used as a
reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1c983d4a709000ef7963b96228322603b98728aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Remove space to improve compatibility with OS drivers and various
tools, and to be consistent with other device names with the 360
suffix.
TEST=build/boot Windows/Linux on Akali360, verify audio functional.
Change-Id: Ib9b909dba939f726e6fbe71f5b4956b432086029
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The value from raw_read_cntfrq_el0() could be large enough to cause
overflow when multiplied by USECS_PER_SEC. To prevent this, both
USECS_PER_SEC and tfreq can be reduced by dividing them by their GCD.
BUG=b:307790895
TEST=emerge-geralt coreboot
TEST=boot to kernel and check the timestamps from `cbmem`
Change-Id: I366667de05392913150414f0fa9058725be71c52
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78800
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After CB:78800 applied, the bootblock increases 2128 bytes and exceeded
its allotted size (40K). Therefore, we enlarge BOOTBLOCK to 44K to solve
the compilation error. This patch also increases PRERAM_CBFS_CACHE to
103K to fill the empty space (1K) between TIMESTAMP and TTB.
BRANCH=none
BUG=none
TEST=./util/abuild/abuild -p none -t GOOGLE_HEROBRINE -x -a -B
Change-Id: Iae9d44939b29098e823508dd3965a1bae7a69041
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I30e4b02a9ca6a15c9bc4edcf4143ffa13a21a732
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78799
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Implement a simple GCD function.
BUG=b:307790895
TEST=emerge-geralt coreboot
TEST=make tests/commonlib/bsd/gcd-test
Change-Id: I21819cda4299b3809b8ca7a95cbdc6a87e4b3481
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78798
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1.In contrast to the MediaTek Wi-Fi module, the Intel Wi-Fi module needs to load a SAR table.
2.Describe the FW_CONFIG probe for the settings on marasov.
- WIFI_SAR_ID_0 for MTK Wi-Fi module MT7921L
- WIFI_SAR_ID_1 for Intel Wi-Fi module AX211NGW
BUG=b:300045956
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Change-Id: I5b5c6bea6c2c916fb682044218ec7b3a5d2659f6
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77789
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
To get tracehub working, it requires few settings such as
SOC_INTEL_METEORLAKE_DEBUG_CONSENT=2 and enable tracehub device in
dev tree. This commit binds all tracehub related settings to Kconfig,
so that users only need to enable SOC_INTEL_COMMON_BLOCK_TRACEHUB
TEST=boot on screebo and test tracehub device exists and working
Change-Id: Ie830fe2fd38e3456497bea37fe42ca60d26ca305
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Enable FW_CONFIG for corsola so that the information can be passed to
payloads via coreboot tables.
BUG=b:157692450
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: I6c12041d3666907c884f5a50a12c1433c2085961
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add an entry in the min_pci_sleep_states array for SA_DEVFN_DPTF,
to correct warning in cbmem log:
[WARN] unknown min d_state for PCI device 00:04.0
TEST=build/boot google/brya (banshee), verify warning not present in
cbmem log, verify entry for DPTF device in ACPI LPI constraint list.
Change-Id: I2a9976b065f08e4acd31c3deca13c5278f031a90
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78877
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Indicate FSP has support to display logo when graphics initialization is
done in FSP.
BUG=b:294055390
TEST=Build and boot to OS in Skyrim with and without passing the BMP
logo buffer from coreboot.
Change-Id: I6112c03723dcbc34cb0f57c400f831c765b95115
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78882
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 2bc9cee0f70f ("Braswell: Update the ACPI tables") switched the
SoC from using its own HPET generation code to the common x86 code, but
along the way the min_tick value got lost. Restore the original value
prior to the above commit, which is now set via a Kconfig override.
TEST=build/boot google/cyan (edgar), verify min_tick value in HPET
ACPI table is correct.
Change-Id: I2633e7cd0c3d74c1554ae8c1f2bb6387fd6dde2b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78744
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, there are 3 separate settings for DPTF which are not always
in sync:
- the enabled/disabled state of the devicetree PCI device
- the 'dptf_enable' register, which sets the ACPI device status via GNVS
- the 'DptfDisable' register, which sets the FSP UPD of the same name
To make things sane, drop the two chip registers, and set the GNVS
variable and FSP UPD based on the enabled/disabled status of the DPTF
PCI device in the mainboard's devicetree.
TEST=build/boot google/cyan (edgar). Verify that the PCI and ACPI
devices are present/enabled when DPTF is enabled in devicetree, and not
present/disabled when disabled in devicetree.
Change-Id: I8fc1b63eda0dc2e047d9cb1e11a02d41ab8b2ad7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The device name for the SA thermal/DPTF PCI device was missing from
soc_acpi_name(), leading to an invalid PLI device constraint entry
being generated in the SSDT (the name field was blank/missing).
Add the missing entry, matching the name to the existing ACPI
device.
TEST=build/boot Win11 on google/puff (wyvern) without a BSOD.
Change-Id: I7ac03fd292246981f32d9ad894b8f0f9870240fc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78869
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add an entry in the min_pci_sleep_states array for SA_DEVFN_THERMAL,
to correct warning in cbmem log:
[WARN] unknown min d_state for PCI device 00:12.0
TEST=build/boot google/puff (wyvern), verify warning not present in
cbmem log, verify entry for THRM device in ACPI LPI constraint list.
Change-Id: Ide98c1b82c56ed1d34c608f9419f61c8e15d2dab
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78868
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the LAN/WiFi device types from PCI to generic, so that the bogus
PCI device and function values don't end up in coreboot's internal
device tree. The presence of these bogus PCI devices cause the LPI
constraint generator to create a reference for an ACPI device which does
not exist (SB.PCI0.RP{xx}.MCHC). The invalid reference(s) cause a
Windows BSOD (INTERNAL_POWER_ERROR).
TEST=build/boot Win11 on google/puff (wyvern). Verify LAN/WLAN devices
function correctly under Windows and Linux.
Change-Id: Ibc5f96250edb358d0517bd3840bf5604defe0b39
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:305887856
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I5993049ac63520c4dfd057c38b566fc69502d825
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change the dGPU/LAN/WiFi device types from PCI to generic, so that the
bogus PCI device and function values don't end up in coreboot's
internal device tree. The presence of these bogus PCI devices cause the
LPI constraint generator to create does a reference for an ACPI device
which does not exist (SB.PCI0.RP{xx}.MCHC). The invalid reference(s)
cause a Windows BSOD (INTERNAL_POWER_ERROR).
TEST=untested
Change-Id: Ic997b5ad893853b99ae53a2e5c7acf58467ea4f1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78873
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch calls into the function to join the MBUS if the GFX PEIM
module inside the FSP binary is taking care of graphics initialization
based on the RUN_FSP_GOP config option. The FW skips joining the MBUS
in case of a non-FSP solution and/or SOC_INTEL_GFX_MBUS_JOIN config is
not enabled.
BUG=b:284799726
TEST=MBUS joining is only applicable for google/rex while using GFX
PEIM.
Change-Id: I50d719a286722f5aafbad48ab4ca60500c836dd6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This reverts commit 2e10a6d6f3ec46bcaf75bd066319d51f001be764.
Reason for revert: The FW version check is not supported except
for ADL platform. Reverted change broke S0ix functionality;
the original CL was added as HW W/A for ADL ONLY.
BUG=b:306214725
TEST=S0ix cycles on Rex with TBT Device attached.
Change-Id: Ib8eb11d36eac4e1c94a3349386442fa3eeeaef37
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78457
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit e728766f4596 ("soc/amd/mendocino: Do not load MP2 Firmware when
in RO") added logic to ensure that the MP2 disable soft fuse bit was set
for the RO section, but failed to check if the bit was already set
otherwise (as it is for non-ChromeOS builds). This caused the bit to
appear twice in the PSP_RO_SOFTFUSE_BITS string, and when the string
was converted to a series of numeric values and added together, bit
(n+1) ended up being set instead of bit n.
To mitigate this, use the makefile sort() function to ensure the
PSP_[RO_]SOFTFUSE_BITS string does not contain any duplicates before
the bitmask is calculated. Apply this to all AMD SoC makefiles where
the softfuse bits are added.
TEST=build/boot google/skyrim (frostflow). Use a verbose build (V=1)
to verify that the correct soft fuse value is passed to amdfwtool for
RO and RW_A/B for both ChromeOS and non-ChromeOS builds.
Change-Id: I2e207e20132d44016fbcb986bdfd8e935d8fead5
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78823
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add fingerprint SPI, and power off FPMCU during romstage.
BUG=b:305860604, b:306320063
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot, measure evtest can detect and check device probed in kernel log
Change-Id: Ic7b9e29ca3cb9352fe098156924fde2719399a79
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
On guybrush, keyboard presses are signaled by the EC via eSPI virtual
wire. The interrupt is shared with others and should be active low.
From 74bce48f1d4 ("mb/google/{zork,guybrush,skyrim},soc/amd/espi: Fix vw_irq_polarity"):
> The default state for the IRQ lines when the eSPI controller comes
> out of reset is high. This is because the IRQ lines are shared with
> the other IRQ sources using AND gates. This means that in order to
> not cause any spurious interrupts or miss any interrupts, the
> IO-APIC must use a low polarity trigger.
Setting `vw_irq_polarity` in the device tree provides an option to
invert interrupts from the eSPI controller, but the register is
initialized from verstage which is baked into RO.
As a workaround, the necessary interrupts on the EC have been
reconfigured to be active low, and we can modify the IO-APIC
accordingly.
EC related CL here: https://crrev.com/c/4891663
BUG=b:218874489
TEST=-`emerge-guybrush chromeos-ec coreboot chromeos-bootimage`
-Flash new RW fw and verify keyboard is functional
-`suspend_stress_test -c 1` and verify i8042 irq is removed as a
wake source
-`echo mem > /sys/power/state`. Press key and verify system wake
from i8042.
Cq-Depend: chromium:4891663
Change-Id: I7d093d94a666263684645ef724e945069c68c806
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Thanks to x86 CBFS cache support, we can leverage cbfs_map() function
to load the VBT binary regardless of if it is compressed or not.
Change-Id: I1e37e718a71bd85b0d7dee1efc4c0391798f16f7
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Commit 1df1cf994aa9 ("commonlib/fsp_relocate: add PE32 section
support") introduced a potential NULL pointer dereference if there is
PE32 binary to relocate outside of the first firmware volume.
The `fih_offset' pointer was used as an output variable but now it is
also used as an input variable to pass the FSP information header to
the `pe_relocate()' function.
This commit resolves this potential NULL-pointer dereference by
passing the pointer systematically and without affecting the logic as
it is only set if it has not been set before.
Change-Id: I9fad90a60854d5f050aa044a5c0b3af91c99df4a
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78501
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A new FSP-S UPD is added to allow passing a buffer containing boot logo
in BMP format. Update the FSP-S UPD and add a SoC specific callback to
populate the UPD.
BUG=b:294055390
TEST=Build and boot to OS in Skyrim. Pass the BMP logo buffer through
the UPD to FSP-S. Ensure that the concerned driver in FSP-S handles the
buffer.
Change-Id: Ie522956b6dfe2400ef91d43c80f2adc6d52c8415
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78817
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I think this was probably a cut & paste error. We don't want prompts
for the "default" Kconfig options. Those should be set by the platform,
not the end user. These prompts didn't make sense where they were in the
Kconfig menus either.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Idcd2ba84591d31a9a25bcc6cae3ec163939d7836
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The ACPI name of any device needs to match the name used for generating
the S0i3 LPI constraint list, which comes from soc_acpi_name() for each
SoC. The names used for the eMMC controller do not match, which will
lead to broken ACPI tables since the LPI constriant will reference
an ACPI device which does not exist. Some OSes tolerate this better
than others, but it should still be corrected.
TEST=build/boot google/{hatch,volteer, brya}, dump ACPI and verify
no invalid device names referenced.
Change-Id: Icbc22b6b2a84bbe73f1b09083f27081612db5eba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78825
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch fixes the redundent GFX modeset issue when a dual display
is attached (e.g. an eDP display and an HDMI display).
The issue was caused by the MBUS joining logic not considering the
display type. This patch introduces three types of display: internal,
external, and dual-display. The MBUS joining logic is then updated
to consider the display type and ensure that the correct pipes are
joined to the MBUS:
For internal-only displays, only PIPE-A is joined to the MBUS.
For external displays, no pipes are joined to the MBUS.
For dual-displays, all available pipes are joined to the MBUS.
BUG=b:284799726
TEST=Able to fix the redundent modeset issue when eDP and HDMI attached
to the google/rex.
Change-Id: Ie2a3b9f1212a9dcab2b7305078fe22ee35e7423c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78691
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In 64bit movsq is available which moves memory in chunks of 8 bytes
rather than 4 bytes.
Linux uses the same code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I65f178d2ed3aae54b0c1ce739c2b4af8738b9fcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change the WiFi device type to generic, so that the LPI constraint
generator does not create a reference for a device which does not
exist in ACPI (SB.PCI0.RP14.MCHC). The invalid reference causes
a Windows BSOD.
TEST=build/boot Win11 on google/hatch (akemi)
Change-Id: Ieab0722a81f0952bb5b6df8e60c4d684ff455418
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78543
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VccSA Power State 2 (PS2) current threshold has be adjusted to 10A to
improve PS2 residency which reduces Voltage Regular (VR) power loss.
BUG=b:308002192
TEST=power and performance analysis shows a positive Load Line result
Change-Id: I2da2b05de8a04f91dacaa55062165c4351422865
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
No driver available or needed under Windows, so hide from OS.
TEST=build/boot Win11 on google/kahlee (liara), verify ADAU7002
device no longer listed as unknown under Device Manager.
Boot Linux and verify audio still functional.
Change-Id: If6d250a123825a69441b5c4d3cde35d5a68f568d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78510
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the required FMD changes to support the change
in cse_lite 'commit Ie0266e50463926b8d377825 ("remove
cbfs_unverified_area_map() API in cse_lite")' for CBFS verification.
With the change in cse_lite the ME_RW_A/B blobs are now part of
FW_MAIN_A/B and corresponding entries in FMD can be removed for boards
that currently use them.
BUG=b:284382452
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I3ca88fee181f059852923d50292b24c0e5b9fd6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Enable FW_CONFIG for geralt so that the information can be passed to
payloads via coreboot tables.
BUG=b:157692450
TEST=emerge-geralt coreboot
BRANCH=none
Change-Id: I8898143f44d2ffda3cb1708c2d7efadc289303a1
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add data.vbt file for quandiso recovery image. Select INTEL_GMA_HAVE_VBT
for quandiso as it has a VBT file now. The VBT file is copied from
chromeos internal source and based on yaviks VBT.
BUG=b:296506936
TEST=emerge-nissa coreboot
Change-Id: Ia9f84b4f56171737a9e7a513b63549b3013775c4
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77588
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Shawn Ku <shawnku@google.com>
|
|
The codec alc5650 has different setting from other amp codec in
depthcharge. Since nissa has a single shared depthcharge target,
add the fw_config field to allow different audio_configs.
(refer to chromium:4983866)
BUG=b:307410704
TEST=With depthcharge change, set fw_config and gbb flags on craaskana
and check beep sound on firmware screen is workable.
Change-Id: I7446fce57557204d91151f1a31755381c1813c6f
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78791
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
During warm reboot, NVMe is not detected with non-serial image
sometimes while there is no issue with serial image. This change
toggles NVMe PWR pin as soon as in early stage to make NVMe ready
sooner.
BUG=b:260547988
BRANCH=None
TEST= Build rex0 and try warm reboot from OS console. Check if
the platform with Micron SSD boots to OS again without an issue.
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I2f34e3f49e7fc388198ff85c8e119cb3f242a60e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Intel has identified an idle hang issue on pre-prod silicon that will
not be fixed or root-caused. To avoid the issue, this commit sets
SaGvWpMask to SAGV_POINTS_0_1_2 in the devicetree.
Note: This change will affect system power.
BUG=b:287170545
TEST=Able to idle for more than 5+ hours without any hang on
google/screebo.
Change-Id: Id0b8db0076d983d336c3bec6d6c33614c69964d1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78794
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit adds power limit settings for 4+8 28W SOC sku and renames
MTL_P_682_CORE to MTL_P_682_482_CORE since they are sharing same 28W
settings.
BUG=b:306677879
TEST=boot on rex with 4+8 SOC and power limit settings are correct
Change-Id: Icb5fc2b13e8510f89c03927439431190439a3a94
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78796
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 7499d9610016c4a89b722498885f196ed6d217aa.
Reason for revert: coreboot build fails
Change-Id: I8ef853d81ee9b1f18d36dfd82cdf687381ece2c6
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78845
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The code for "phase 4" of firmware verification currently only sets a
recovery reason when there's an actual hash mismatch detected in
vb2api_check_hash_get_digest(). This is the most likely way how this
section of code can fail but not the only one. If any other unexpected
issue occurs, we should still set a recovery reason rather than just
reboot and risk an infinite boot loop.
This patch adds a catchall recovery reason for any error code that falls
out of this block of code. If a more specific recovery reason had
already been set beforehand, we'll continue to use that -- if not, we'll
set VB2_RECOVERY_FW_GET_FW_BODY.
Change-Id: If00f8f8a5d17aa113e0325aad58d367f244aca49
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78821
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Windows doesn't have / will likely never have a signed driver for the
FPR, so set the device status as hidden so it will not appear as an
unknown device in Windows Device Manager. Linux does not check/care
about the ACPI device status.
TEST=build/boot Win11 on google/brya (kano), verify FPR does not show
up as unknown device under Device Manager.
Change-Id: Ie73fd9d448ecca9e9112abc0d92b4ab46ce3618d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Windows doesn't have / will likely never have a signed driver for the
FPR, so set the device status as hidden so it will not appear as an
unknown device in Windows Device Manager. Linux does not check/care
about the ACPI device status.
TEST=build/boot Win11 on google/hatch (jinlon), verify FPR does not
show up as unknown device under Device Manager.
Change-Id: Ia4a908afdabad0ae8db45c4731a00c9cb17b42bb
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Adapted from Alderlake implementation, modified as needed.
Device names missing from soc_acpi_name() were added as well.
TEST=build/boot Win11, Linux on google/hatch (akemi).
Change-Id: Ib2c733c04e29f0f9e7e2e6dbf36c2a7618fdc23f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Copied from Alderlake implementation, modified as needed for Tigerlake.
Device names missing from soc_acpi_name() were added as well.
TEST=build/boot Win11, Linux on google/volteer (drobit).
Change-Id: I34999891ea0d386328698109b6315d481de7c43a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78521
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch includes the soc.asl from Genoa (SoC) folder,
which in-turn includes pci_int_def.asl
Change-Id: Id7a3b9c752546638f7b446510e17c44e9f10106d
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78496
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds PCI interrupt details as per the Processor Programming
Reference (PPR) version 0.25 (#55901), table 319.
Change-Id: I81251bd60aac1d7bd3181699d3adca315291f336
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78392
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables FVM for IA and SA VRs as per the OEM requirement.
BUG=b:307237761
TEST=Able to build and boot google/screebo.
Change-Id: Icb0611331ac7090d11d646a5ad5201593a90aacb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch allows google/rex mainboard to choose between "Performance"
(PL_PERFORMANCE) and "Baseline" (PL_BASELINE) power limits (PLs).
This is important for platform to meet balance between power and
performance.
The OEM design google/screebo selects baseline power limit to maintain
the balance performance in lower power.
BUG=b:307237761
TEST=Able to build and boot google/screebo.
w/o this patch:
screebo4es-rev1 ~ # cbmem -c -1 | grep "CPU PL"
[INFO ] CPU PL1 = 15 Watts
[INFO ] CPU PL2 = 57 Watts
[INFO ] CPU PL4 = 114 Watts
w/ this patch:
screebo4es-rev1 ~ # cbmem -c -1 | grep "CPU PL"
[INFO ] CPU PL1 = 15 Watts
[INFO ] CPU PL2 = 40 Watts
[INFO ] CPU PL4 = 84 Watts
Change-Id: I43debc5442ae9c01851652beba676ffc102ca27d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the device scope of them.
While on it, remove superfluous comments related to modified lines.
Change-Id: I2f641ce1fc44a9d7c9f9c403d255997214021f47
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the device scope of them.
While on it, remove superfluous comments related to modified lines.
Change-Id: I15f326774850b3c9562f7eebb78f29430dec1031
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78667
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the device scope of them.
While on it, remove superfluous comments related to modified lines.
Change-Id: I75aeb46ea3b4a7c0a41dce375735e7b42ed59587
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78664
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to improve the readability of the settings, use a comma
separated list to assign values to their indexes instead of repeating
the option name for each index.
Don't convert the settings for PCIe root ports as they should stay in
the device scope of them.
While on it, remove superfluous comments related to modified lines.
Change-Id: I92414efc9ddb849ceb8b9c4f0bc564bdbd92773b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78638
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch palkia overridetree to use chipset devicetree references.
Change-Id: Ic5fd2d139d22824d3ada09325022c37e69b5e2a9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Switch nightfury overridetree to use chipset devicetree references.
Drop USB port overrides which are identical to the baseboard.
Change-Id: I9bb028ad12b97fd4510f6d1026fdc16232c64dba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78570
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Switch mushu overridetree to use chipset devicetree references.
Change-Id: Iac05b0b2c5785f2cb69a29aa4d4c3088f164385f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Switch kohaku overridetree to use chipset devicetree references.
Drop USB port overrides which are identical to the baseboard.
Change-Id: Idcfde6882fc433e6a248aff6baf23b1a5bf7d201
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add a new Krabby follower 'Chinchou'.
BUG=b:307161347
TEST=make # select Chinchou
Change-Id: Ic90f85621598ab253d3ec9fe44aa076712248223
Signed-off-by: wuyang5 <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78596
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DDR interfaces emit electromagnetic radiation which can couple
to the antennas of various radios that are integrated in the system,
and cause radio frequency interference (RFI). The DDR Radio Frequency
Interference Mitigation (DDR RFIM) feature is primarily aimed at
resolving narrowband RFI from DDR4/5 and LPDDR4/5 technologies
for the Wi-Fi high and ultra-high bands (~5-7 GHz).
This patch sets CnviDdrRfim UPD and enables CNVI DDR RFIM feature
for Craask variant.
Refer to Intel doc:640438 and doc:690608 for more details.
BUG=None
BRANCH=None
TEST=Build and boot Craask.
- Verified that Wifi DDR RFIM Feature is enabled and DDR RFI table can be modified.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: I5560bbedb26e88edd9d35f16b639fe63ef42c30e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Just as in commit 38569d061099: ("mb/lenovo/{x230, x230s}: Disable
SuperSpeed capabilities for WWAN USB")
Although on ThinkPads with Panther Point PCH the usb port inside wwan
socket is usually wired to XHCI, it has actually no SuperSpeed lines,
so maybe it is okay to disable SuperSpeed capabilities, and wire them
to EHCI #2 by making use of XUSB2PRM and USB3PRM.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I61e61283a821686558f7f3fdfac7073bb3557e93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78680
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Meteor Lake has a UPD config called In-Band ECC(IBECC) which uses a part of the system DRAM to store the ECC information. There are a few UPD parameters in FSP-M to configure this feature as needed.
This patch adds code to expose these parameters to the devicetree so
that they can be configured on the mainboard level as needed.
Change-Id: Ice1ede430d36dff4175a92941ee85cc933fa56d5
Signed-off-by: Marx Wang <marx.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Export Power State Current 1, 2 and 3 Threshold configuration entries.
BUG=b:308002192
Change-Id: Iff4467720541efbdedace12431cd1f6f66fca8e6
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patches privides settings based on 2+8 15w.
BUG=b:306543967
TEST=boot on rex with 2+4 SOC and power limit settings are overridden
correctly in variant_update_cpu_power_limits
Change-Id: I0560e44ce8e0d91bb5fb9c7cc9ffe68ab050bf00
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78688
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This commit adds power limit settings for 2+4 15w SOC sku and renames
MTL_P_282_CORE to MTL_P_282_242_CORE since they are sharing same 15w
settings.
BUG=b:306543967
TEST=boot on rex with 2+4 SOC and power limit settings are correct
Change-Id: Id738303d1652f964142f8f27110426d6b84609bf
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78495
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
