Age | Commit message (Collapse) | Author |
|
The file chip.h has a special purpose for defining the
configuration structure used in static devicetree.
Change-Id: If0289c29ca72768009c1b7166311bc4c3cee4171
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Tested on Mono Lake
TEST=Note the kernel log:
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Change-Id: Idae9a7d3d4233037214d6203996bf44fe5f3a845
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35027
Reviewed-by: Johnny Lin
Reviewed-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch includes common romstage code to setup the console
and load postcar.
Fix booting regression issue on all latest IA-SOC introduced by CB:34893
Change-Id: I9da592960f20ed9742ff696198dbc028ef519ddf
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Additional changes in this patch:
- Remove comments saying that a file is based on another file from the
coreboot project.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: If61689db67c58f0d66ab96ca749bfcd589935ce2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34607
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This timestamp also got unintentionally removed from some
boards as they were transformed to use common romstage entry.
Change-Id: I12be278a674f9a2ea073b170a223c41c7fc01a94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34970
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create a new Kconfig symbol that allows an x86 device to begin execution
when its reset vector is in DRAM and not at the traditional 0xfffffff0.
The implementation will follow later, this is just to setup various
ENV_xxx definitions correctly for the build environment.
Change-Id: I098ecf8bf200550db1e15f178f7661c1ac516dc5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This enables the use of .bss section for ENV_BOOTBLOCK
and ENV_VERSTAGE even with CAR_GLOBAL_MIGRATION=y.
In practice, boards with CAR_GLOBAL_MIGRATION=y currently
build with romcc-bootblock so they will not be using .bss.
Change-Id: Ie9dc14f3e528d3e4f48304f4d7de50df448a8af6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I311423cb565485236f89bd6043155aaf6296a031
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34974
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This provides stack guards with checking and common
entry into postcar.
Change-Id: If0729721f0165187946107eb98e8bc754f28e517
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34973
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This allows for minor optimization as num_timestamps becomes
a constant zero for a function with local scope. The loop
with calls to timestamp_add() gets removed from bootblock.
Change-Id: Id230075c0e76fe377b6ea8c8ddf8318e07d29b91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This provides stack guards with checking and common
entry into postcar.
The code in cpu/intel/car/romstage.c is candidate
for becoming architectural so function prototype
is moved to <arch/romstage.h>.
Change-Id: I4c5a9789e7cf3f7f49a4a33e21dac894320a9639
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34893
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9dbf0fc14516f766fd164c7308906456f2865e89
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34982
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ENV_ROMSTAGE_OR_BEFORE is a direct replacement for testing
defined(__PRE_RAM__) as a true statement instead of with the
help of the preprocessor.
Note that for x86, due to existence of ENV_POSTCAR and ENV_SMM,
ENV_ROMSTAGE_OR_BEFORE and ENV_RAMSTAGE are not the inverse of
each other.
Change-Id: Ibd2292f922ccb9e79d10ca9bc35797048d174287
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34939
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These are required to cover the absensce of .data and
.bss sections in some programs, most notably ARCH_X86
in execute-in-place with cache-as-ram.
Change-Id: I80485ebac94b88c5864a949b17ad1dccdfda6a40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Currently only x86 requires special handling here, for simplicity
avoid introducing <arch/rules.h> and deal with this directly in
<rules.h>.
For consistency prefixes are changed from ARCH_ to ENV_.
Change-Id: I95a56dbad3482202f6cc03043589bebfb13c39af
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Board has CAR_GLOBAL_MIGRATION=n and can use .bss for a
variable that was previously declared with CAR_GLOBAL.
Test for !defined(__PRE_RAM__) can be transformed into
ENV_RAMSTAGE here as the warnings about invalid bmcinfo
structure do not need to be repeated in SMM console, which
is generally disabled anyways due to DEBUG_SMI=n.
Change-Id: I6b63213484107fa0eeb0d952d8766916b44a3c4e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add cometlake EMMC controller ID
BUG=none
BRANCH=none
TEST=none
Change-Id: I3943dad57918df3df7885c2e2d3a86ab0e1d6008
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Additional changes in this patch:
- Make sure files say that they're part of the coreboot project
- Move descriptions below the license header
Note that the file include/arch/acpi.h is a fantastic example of why
moving to the authors file is needed. Excluding the guard statements,
it has 8 lines of copyrights for 3 function declarations.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I334baab2b4311eb1bd9ce3f67f49a68e8b73630c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34606
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Kukui AP doesn't remember if the last AP reset was due to AP watchdog.
We need to enable CHROMEOS_USE_EC_WATCHDOG_FLAG so that it will query
the reset reason from EC.
BUG=b:109900671,b:118654976
BRANCH=none
TEST=1. run 'mosys eventlog clear; stop daisydog; echo > /dev/watchdog'
2. wait for watchdog reset
3. check 'mosys eventlog list | grep watchdog'
Change-Id: I053cc7664bbaf0d3fcae26ba9481a0ad700dca90
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
As discussed on the mailing list and voted upon, the coreboot project
is going to move the majority of copyrights out of the headers and into
an AUTHORS file. This will happen a bit at a time, as we'll be unifying
license headers at the same time.
Additional changes in this patch:
- Make sure files say that they're part of the coreboot project
- Move descriptions below the license header
- Fix some spacing
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Id5f26a73f0df366651c076a94975bce1fb321b70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34605
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
EFP1 is configured as 'DisplayPort with HDMI/DVI
compatibility'. Using this setting 4K monitor is configured
into lower resolution.
Change EFP1 setting to 'HDMI/DVI'
The next addtional small changes are made in VBT:
UEFI GOP Driver
Child Device 2 = LFP
Child Device 3 = EFP1/LFP
LFP Panel configuration Y-Res of Panel #10 = 1920
BUG=N/A
TEST=LCD and HDMI on Facebook FBG1701
Change-Id: Idc694b15ff94b83291a8c8252e269b7e6d96f87b
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35043
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
cb_sha.c depends on C_ENVIRONMENT_BOOTBLOCK.
Include cb_sha.c unconditional since C_ENVIRONMENT_BOOTBLOCK is default for
chipsets.
BUG=N/A
TEST=Boot Linux 4.20 and verify logging on Facebook FBG-1701
Change-Id: If93195596efe7d8f298430e67eb1cf79804b96fc
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
|
|
Changes to the sandybridge memory init code (both MRC
and native) now require SPD data on all populated channels
in order for dimms to be detected properly, so copy
spd_data[0] to spd_data[2], as LINK always has 2
channels of memory down.
Test: boot google/link, observe onboard RAM correctly
detected on both channels
Change-Id: Id01d57d5e5f928dfc1cd9063ab1625c440ef2bbe
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
DRAM_SIZE_MB should be the maximum size (255GiB / -m 261120M)
that’s possible with QEMU on AArch64 virt because it tries to search
the DRAM_SIZE_MB range to find the true memory size.
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Change-Id: Id479c0b18d1e1adceecdcca13e36119b95617e6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Register exception handlers to avoid a Synchronous External Abort
that is raised when you try to access a non-memory address on ARMv8.
An exception handler can jump over the faulting instruction.
This is the feature only for QEMU/AArch64.
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Change-Id: I09a306ca307ba4027d9758c3debc2e7c844c66b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
FSP 1263 looks for UPD configuration of "AudioLinkHda"
if false it disables SDI# link for the codec.
Change-Id: I8330f47416e580bf6b9ca1faed1de5cd578d0e2e
Signed-off-by: Selma BENSAID <selma.bensaid@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35078
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7d00ddf727e7250b767a1c4b58bf11b17e900fc1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34828
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4215b27332034a3c07052db92e4abae55c3fe967
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Re-assign sku number for vortininja.
BuG=b:138177049
BRANCH=octopus
TEST=emerge-octopus coreboot
Change-Id: I3166a635151fcc7b2e3c0122fa05925cfa5df7d0
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
After ChromiumOS CL:1293132 and CL:1295890, Chrome EC can store the flag
telling if the last reboot was triggered by AP watchdog for some boards
(e.g., Kukui).
This CL adds a new function google_chromeec_get_ap_watchdog_flag(),
which reads the AP watchdog flag from Chrome EC, and updates the tables
of reset causes and reset flags.
A new Kconfig option CHROMEOS_USE_EC_WATCHDOG_FLAG is added for
elog_handle_watchdog_tombstone() to determine if watchdog reset was
triggered by the AP watchdog flag from EC instead of the tombstone in
AP.
BUG=b:109900671,b:118654976
BRANCH=none
TEST=test with https://review.coreboot.org/c/coreboot/+/31843
Change-Id: I7a970666a8c6da32ac1c6af8280e808fe7fc106d
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Copy ec_commands.h directly from ChromiumOS EC repository (CL:1520574).
Since ec_commands.h already defines usb_charge_mode and only
USB_CHARGE_MODE_DISABLED is used in coreboot, enum usb_charge_mode is
removed from ec.h.
To avoid redefinition of the BIT macro, #ifndef check is added to
include/types.h.
BUG=b:109900671,b:118654976
BRANCH=none
TEST=emerge-kukui -j coreboot
Change-Id: I7ed5344fc8923e45e17c3e2a34371db6f80b079d
Signed-off-by: You-Cheng Syu <youcheng@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31885
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the next board version, we will use GPP_D9 as enable control for touch
screen.
BUG=b:137133946
TEST=build
Change-Id: I213d0878bfca1ce4059ec0393f59d8e79e1b274c
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
sx9310 and FPMCU are not used in Kindred.
BUG=none
TEST=build
Change-Id: Ied09d4bdb899d991131a75d7c848ff8637022f53
Signed-off-by: Philip Chen <philipchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
When upstreamed, GPIO and RAM config for clapper variant was taken
from an older branch, leading some boards to fail to boot.
Update based on chromium branch firmware-clapper-5216.199.B,
commit 362d845 [baytrail: implement baytrail technical advisory 556192]
Change-Id: I099ee2cd0833e4b9ab093663c4549c79ec044127
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Call exception_init() before calling cbmem_initialize() because
ARMv8 on QEMU uses an exception handler to detect a ram size.
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Change-Id: If010234a6576414e7e174c075b599a4aa4c19eab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Allow a driver to return device specific _HID, which will be consumed by
acpigen in order to generate proper SSDTs.
Change-Id: Ibb79eb00c008a3c3cdc12ad2a48b88a055a9216f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35006
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 38dbd6892080c93ccd24fbfa46ed5d9bdb7d9e99.
Reason for revert:
ODM helped to verify w/ BT runtime suspend disabled + revert this change
And issue is gone. so I revert this change
see the test result in
https://partnerissuetracker.corp.google.com/issues/136039607#comment32
Change-Id: I248e9613cc39247a2bb88270c234c7d36d0ff60f
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
This Device ID is specific to CML, since it is obtained by reading ISH
configuration RO register.
In order to export ISH to kernel PCI device tree, this number must be
included in list of devices supported.
Change-Id: I6d245f1b3f0d0cfec77c31033eb20f147fd3d870
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34687
Reviewed-by: Li1 Feng <li1.feng@intel.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These variants are to support the sarien and arcada boards
with CML SOC, the drallion variant will be used to support the
upcoming drallion board.
Signed-off-by: Thejaswani Putta <thejaswani.putta@intel.com>
Change-Id: I766bdccb6f8b6924d6ae1abbe57035f4ff1f6f17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Declare the following panel for Kodama:
- AUO B101UAN08.3
BUG=b:139699622
TEST=builds Kodama image and working properly
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I3f688ffd0ece6afac08d353ab5a6cf1cf876b32f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35001
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only apply the flag for libagesa -class.
Change-Id: Ide46214d62b2b16e5e1deaa0796be784ed813095
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34885
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch changes the Rockchip SPI and I2C drivers to use the new
buffer_from_fifo32()/buffer_to_fifo32_prefix() helpers when accessing
their FIFOs (mostly just to demonstrate that/how the helpers work).
Change-Id: Ifcf37c6d56f949f620c347df05439b05c3b8d77d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Many peripheral drivers across different SoCs regularly face the same
task of piping a transfer buffer into (or reading it out of) a 32-bit
FIFO register. Sometimes it's just one register, sometimes a whole array
of registers. Sometimes you actually transfer 4 bytes per register
read/write, sometimes only 2 (or even 1). Sometimes writes need to be
prefixed with one or two command bytes which makes the actual payload
buffer "misaligned" in relation to the FIFO and requires a bunch of
tricky bit packing logic to get right. Most of the times transfer
lengths are not guaranteed to be divisible by 4, which also requires a
bunch of logic to treat the potential unaligned end of the transfer
correctly.
We have a dozen different implementations of this same pattern across
coreboot. This patch introduces a new family of helper functions that
aims to solve all these use cases once and for all (*fingers crossed*).
Change-Id: Ia71f66c1cee530afa4c77c46a838b4de646ffcfb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add panels supported by flapjack.
Change-Id: I547bf6f26bdbfed52a00c8cfb268d4e7c17ed889
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With RELOCATABLE_RAMSTAGE, S3 resume path only uses
memory that is reserved from OS. So there is no need
for low memory backup and recovery.
Change-Id: If7f83711685ac445abf4cd1aa6b66c3391e0e554
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
ACPI S3 resume path can only modify low memory where
the non-relocatable ramstage resides, there is no need
to maintain a bigger backup copy.
Change-Id: Ifae41b51b359010ec02269c674936a87bd15623b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/15476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Start with moving all postcar_frame related function
declarations here from <arch/cpu.h>.
Change-Id: I9aeef07f9009e44cc08927c85fe1862edf5c70dc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34911
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The panel description may be pretty large (for example, 1.3k for BOE
TV101) due to init commands and we should only load the right config
when display is needed.
BUG=None
TEST=make -j; boots and see display on Krane.
Change-Id: I2560a11ecf7badfd0605ab189d57ec9456850f75
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add scp voltage initialization.
BUG=b:135985700
BRANCH=none
Test=Boots correctly on Kukui and scp can boot up normally
Change-Id: I5afb60af3c14490e20f28f1c089cfca42ddf7fcf
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
With C_ENVIRONMENT_BOOTBLOCK, CONFIG_DCACHE_BSP_STACK_SIZE needs to be
set to define a stack region that can be shared over all stages using
CAR. It makes sense to use that Kconfig option's value instead of a
hardcoded value. This will result in less false positives when the
stack size is big, for instance with FSP using the coreboot stack.
In many configurations with C_ENVIRONMENT_BOOTBLOCK the stack_base is
at the base of CAR. If the stack grows too large it operates out of
CAR, typically resulting in a hang. Therefore the stack guards are
extended to cover 256 bytes at the base to at least provide a warning
when the romstage is dangerously close of running out of stack.
Change-Id: I2ce1dda4d1f254e6c36de4d3fea26e12c34195ff
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These platforms use different signature for this function, so
declare them with different name to make room in global namespace.
Change-Id: I77be9099bf20e00ae6770e9ffe12301eda028819
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34909
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SMI trap handler was missing a printk statement, which caused
Coverity to flag "data &= mask;" as a redundant operation.
Change-Id: I71da74e5e08e7d7e6d61c1925db19324efd73f0a
Found-by: Coverity CID 1381621
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
To make explicit when vboot2 error codes should be returned,
use the new vb2_error_t type on all functions which return
VB2_ERROR_* constants.
Additionally, add required vboot submodule commit id e6700f4c:
2019-07-31 14:12:30 +0800 - (vboot: update vboot2 functions to use new vb2_error_t)
NOTE: This patch was merged separately on the Chromium tree:
https://chromium-review.googlesource.com/c/1728499
BUG=b:124141368, chromium:988410
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I804c2b407e496d0c8eb9833be629b7c40118415c
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1728292
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Use PAD_BUF() to disable the input/output buffer inside PAD_CFG_* macros
instead PAD_CFG0_RX_DISABLE/PAD_CFG0_TX_DISABLE
[1] https://review.coreboot.org/c/coreboot/+/34337
Change-Id: I19fd993e1f60d80eab0ce51eaed5e74ce1c6a34d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There is no need to change the default value for the RX Level/Edge
Configuration parameter if the pad is not used/connected (PAD_NC)
Change-Id: Ie7eee83fba9320d52240166371fe0c757dbdce49
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I62bbba8cfe515b3cae413582ff8d062a20e6741b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/15474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Set the controller state to D0 during the uart init sequence, this
ensures the controller is up and active.
One more argument "const struct device *dev" has been added
to uart_lpss_init function.
BUG=b:135941367
TEST=Verify no timeouts seen during UART controller enumeration
sequence in CML, ICL and APL platforms
Change-Id: Ie91b502a38d1a40a3dea3711b015b7a5b7ede2db
Signed-off-by: Usha P <usha.p@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34810
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enlarge PRERAM_CBFS_CACHE region from (16K - 4) to (48K - 4) bytes to
decompress and load more data from CBFS in romstage.
BUG=b:134351649
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: Idc23a67c886718e910ca3c50468e5793f19c8d66
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34896
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since SRAM space is too small to fit all needed features, enable
VBOOT_RETURN_FROM_VERSTAGE and overlap decompressor, verstage and
romstage to gain more space.
BUG=b:134351649
BRANCH=none
TEST=emerge-kukui coreboot
Change-Id: Ibe336cf93b01fa2ea57b4c2e0a89685424878c91
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34871
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards (e.g., Kukui) need GPIO based CS for SPI0. This patch
changes the pinmux and binds the pins to the correponding SPIs.
When using GPIO based SPI CS, we need to manually make CS log/high
before/after SPI transactions.
BUG=b:132311067
BRANCH=none
TEST=Verified that b/132311067 is irreproducible
Change-Id: I61653fb19242b6ee6be9a45545a8b66e5c9c7cad
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The bootsplash.jpg needs to match the framebuffer resolution.
Configuration errors are more visible if they can be compared
easily.
Changed message to be always printed:
"Setting up bootsplash in ${FRAMEBUFFER_RESOLUTION}"
Added message:
"Bootsplash image resolution: ${IMAGE_RESOLUTION}"
Change-Id: Ib4a06d53c0134b99d3e9e6d3eda9fa30fca9ef7d
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34598
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on Lenovo ThinkPad T440p.
Change-Id: I83dc2c19341475abeeacd374a1b6cf152ec9b497
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This change corrects DPTF temperature sensor IDs
BUG=none
BRANCH=none
TEST=none
Change-Id: I25c76b0e938b2568da1833a4a5685ed36c00275e
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove cases of __PRE_RAM__ and other preprocessor guards.
Change-Id: Id295227df344fb209d7d5fd12e82aa450198bbb8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34928
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I52a7b39566acd64ac21a345046675e05649a40f5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34980
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously, the initial value for secdatak was embedded
in secdata_tpm.c as a uint8_t array. Switch to using
vb2api_secdatak_create instead, and write the value in
ctx->secdatak.
Remove an unnecessary call to vb2api_secdata_create in
_factory_initialize_tpm.
BUG=b:124141368, chromium:972956
TEST=make clean && make test-abuild
BRANCH=none
TEST=Check that size and value of initial secdatak
has not changed. Apply the patch below and
check for this output:
_factory_initialize_tpm():266: _factory_initialize_tpm: secdatak sizes are identical? 1
_factory_initialize_tpm():269: _factory_initialize_tpm: secdatak values are identical? 1
diff --git a/src/security/vboot/secdata_tpm.c b/src/security/vboot/secdata_tpm.c
index ff62185107..c1818b482f 100644
--- a/src/security/vboot/secdata_tpm.c
+++ b/src/security/vboot/secdata_tpm.c
@@ -148,6 +148,18 @@ static uint32_t write_secdata(uint32_t index,
return TPM_E_CORRUPTED_STATE;
}
+/*
+ * This is derived from rollback_index.h of vboot_reference. see struct
+ * RollbackSpaceKernel for details.
+ */
+static const uint8_t secdata_kernel[] = {
+ 0x02,
+ 0x4C, 0x57, 0x52, 0x47,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00,
+ 0xE8,
+};
+
/*
* This is used to initialize the TPM space for recovery hash after defining
* it. Since there is no data available to calculate hash at the point where TPM
@@ -250,6 +262,11 @@ static uint32_t _factory_initialize_tpm(struct vb2_context *ctx)
* indication that TPM factory initialization was successfully
* completed.
*/
+ VBDEBUG("%s: secdatak sizes are identical? %d\n", __func__,
+ sizeof(secdata_kernel) == sizeof(ctx->secdatak));
+ VBDEBUG("%s: secdatak values are identical? %d\n", __func__,
+ memcmp(secdata_kernel, ctx->secdatak,
+ sizeof(secdata_kernel)) == 0);
RETURN_ON_FAILURE(set_kernel_space(ctx->secdatak));
if (CONFIG(VBOOT_HAS_REC_HASH_SPACE))
@@ -452,7 +469,7 @@ uint32_t antirollback_read_space_firmware(struct vb2_context *ctx)
/* Read the firmware space. */
rv = read_space_firmware(ctx);
- if (rv == TPM_E_BADINDEX) {
+ if (true) {
/*
* This seems the first time we've run. Initialize the TPM.
*/
Change-Id: I74261453df6cc55ef3f38d8fb922bcc604084c0a
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1652874, chromium:1655049
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add G2Touch touchscreen support for blooglet.
BUG=b:139725457
BRANCH=octopus
TEST=emerge-octopus coreboot chromeos-bootimage, and check touchscreen by
evtest.
Change-Id: I6ebcc60f58857d8b28446932787742c2740fadd8
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
google_chromec_get_event() depends on the main copy of EC which is
used by ACPI subsytem in the kernel for querying events.
google_chromeec_get_event() also clears the event from EC. Thus if the
kernel has to identify the wake source, it has no way to do that. Thus
instead depend on events_copy_b to log the wake source. Please look at
go/hostevent-refactor for more info.
BUG=b:133262012
BRANCH=None
TEST=Hack hatch bios and make sure hostevent log is correct.
Change-Id: I39caae2689e0c2a7bec16416978877885a9afc6c
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update I2C irq to EDGE trigger for Raydium TS.
BUG=b:135551210
BRANCH=master
TEST=emerge-grunt coreboot
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ic0a00a31eefa756b6e4ee9aac8d25c1be5ac9195
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34987
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Treeya doesn't support the keyboard backlight.
BUG=b:135551210
BRANCH=grunt
TEST=emerge-grunt coreboot
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I02dfc77d3cb7ac00b3f10d577d92775db99c1bdf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
Use AGPIO 10 as the EC sync interrupt for MKBP events for sensor data.
Reference to Aleena project.
BUG=b:135551210
BRANCH=grunt
TEST=emerge-grunt coreboot
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ie0b719ebce90710bca2109b7ff255e19329f9cac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
Enable ACPI TBMC notification on tablet mode change to support
convertible treeya devices.
BUG=b:135551210
BRANCH=grunt
TEST=emerge-grunt coreboot
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Id0618c8df66267b88008dc5057892de6b530629f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward Hill <ecgh@chromium.org>
|
|
Synaptics touchscreen
BUG=b:139699619
TEST=emerge-grunt coreboot chromeos-bootimage
flash bios image to DUT and make sure the touchpad and
touchscreen can work
Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I002badd49e678e1c32c802352923ca51efb45cef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We need to ensure uma_memory_size and uma_memory_base stay within a
32-bit address range. Both of these variables are 64 bits wide, so it is
simplest to use 64 bit math when doing the bit shifts and then check if
they are in range after.
Change-Id: Idd180f31e8cff797a6499b12bc685daa993aae05
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229665, 1229666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
coreboot would clear CMOS by request via IPMI command, for example
BMC can issue "bios-util server --boot_order enable --clear_CMOS"
to set the request and reboot the system, then coreboot would clear CMOS
on the next boot.
Tested on Mono Lake
Change-Id: I21d44557896680cfac3c3b6d83e07b755b242cad
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34857
Reviewed-by: Johnny Lin
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:123907904
TEST=SD WP GPIO PAD retains coreboot configuration
and FSP ScsSdCardWpPinEnabled UPD is set to 0.
Change-Id: I30367cda09cc8c88abb649f70b4587889083f9af
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34901
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Cometlake FSP allows provison to configure SD controller WP pin, As
some of board design might choose not to use the SD WP pin from SD
card controller. This implementation adds a config that allows to
enable/disable SD controller WP pin configuration from FSP.
BUG=b:123907904
Change-Id: Ic1736a2ec4b9370d23a8e3349603eb363e6f59b9
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34900
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
C strict aliasing rules state that it is undefined behaviour to access
any pointer using another pointer of a different type (with several small
exceptions). Eg.
uint64_t x = 3;
uint16_t y = *((uint16_t *)&x); // undefined behaviour
From an architectural point of view there is often nothing wrong with
pointer aliasing - the problem is that since it is undefined behaviour,
the compiler will often use this as a cop-out to perform unintended or
unsafe optimizations. The "safe" way to perfom the above assignment is
to cast the pointers to a uint8_t * first (which is allowed to alias
anything), and then work on a byte level:
*((uint8_t *)&y) = *((uint8_t *)&x);
*((uint8_t *)&y + 1) = *((uint8_t *)&x + 1);
Horribly ugly, but there you go. Anyway, in an attempt to follow these
strict aliasing rules, the ReadMEM() function in SB800 does the above
operation when reading a uint16_t. While perfectly fine, however, it
doesn't have to - all calls to ReadMEM() that read a uint16_t are passed
a uint16_t pointer, so there are no strict aliasing violations to worry
about (the WriteMEM() function is exactly similar). The problem is that
using this unnecessary workaround generates almost 50 false positive
warnings in Coverity. Rather than manually ignore them one-by-one, let's
just remove the workaround entirely. As a side note, this change makes
ReadMEM() and WriteMEM() now match their definitions in the SB900 code.
Change-Id: Ia7e3a1eff88b855a05b33c7dafba16ed23784e43
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Port_List is an array of 8 elements, and GCC 9 is warning that there
are no 'others' when all 8 elements are explicitly initialized, which is
causing the build to fail. Remove the 'others => Disabled' clause to
silence this.
Change-Id: Id082e7a76641438f3fb4c4d976dbd254a7053473
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34918
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
add_ivrs_device_entries() is a recursive function, and each recursive
call is passed a pointer to a root_level variable declared outside the
function. In an attempt to make the function self-contained, the initial
call is made with the root_level pointer set to NULL, and then the
function attempts to detect this and allocate a root_level variable for
the rest of the calls. This makes memory management very tricky - for
example, the pi code incorrectly attempts to free the root_level
variable at the end of *each* recursive call, which only avoids being a
double-free because free() in coreboot is currently a no-op. Let's
keep life simple and declare root_level as a local variable outside the
first function call instead.
Change-Id: Ifd63ee368fb89345b9b42ccb86cebcca64f32ac8
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1362811
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34387
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Doing this allows to call console_init() earlier in romstage.
This also fixes IO UART in bootblock, although it appears there
is currently no board that was affected.
Change-Id: Iec363a8c651cc1b05b24229db09d686938118f3a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34969
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Variable length arrays were a feature added in C99 that allows the
length of an array to be determined at runtime. Eg.
int sum(size_t n) {
int arr[n];
...
}
This adds a small amount of runtime overhead, but is also very
dangerous, since it allows use of an unlimited amount of stack memory,
potentially leading to stack overflow. This is only worsened in
coreboot, which often has very little stack space to begin with. Citing
concerns like this, all instances of VLA's were recently removed from the
Linux kernel. In the immortal words of Linus Torvalds [0],
AND USING VLA'S IS ACTIVELY STUPID! It generates much more code, and
much _slower_ code (and more fragile code), than just using a fixed
key size would have done. [...] Anyway, some of these are definitely
easy to just fix, and using VLA's is actively bad not just for
security worries, but simply because VLA's are a really horribly bad
idea in general in the kernel.
This patch follows suit and zaps all VLA's in coreboot. Some of the
existing VLA's are accidental ones, and all but one can be replaced with
small fixed-size buffers. The single tricky exception is in the SPI
controller interface, which will require a rewrite of old drivers
to remove [1].
[0] https://lkml.org/lkml/2018/3/7/621
[1] https://ticket.coreboot.org/issues/217
Change-Id: I7d9d1ddadbf1cee5f695165bbe3f0effb7bd32b9
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33821
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Print an error message and die if the PCI device cannot be found.
Change-Id: I10c58502658ebf12d1a8fe826ee7d47a618fd1c8
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1403000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
DqByteMapCh0 and DqByteMapCh1 are declared adjacently in the
FSP_M_CONFIG struct, so it is tempting to begin memcpy at the address of
the first array and overwrite both of them at once. However, FSP_M_CONFIG
is not declared with the packed attribute, so this is not guaranteed to
work and is undefined behaviour to boot. It is cleaner and less tricky
to copy them independently. The same is true for DqsMapCpu2DramCh0 and
DqsMapCpu2DramCh1, so we change those as well.
Change-Id: Ic6bb2bd5773af24329575926dbc70e0211f29051
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 136538{8,9}, 140134{1,4}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33135
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DqByteMapCh0 and DqByteMapCh1 are declared adjacently in the
FSP_M_CONFIG struct, so it is tempting to begin memcpy at the address of
the first array and overwrite both of them at once. However, FSP_M_CONFIG
is not declared with the packed attribute, so this is not guaranteed to
work and is undefined behaviour to boot. It is cleaner and less tricky
to copy them independently. The same is true for DqsMapCpu2DramCh0 and
DqsMapCpu2DramCh1, so we change those as well.
Change-Id: If394f14c4a39d6787ae31868241229646c26be7a
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1365730, 14013{38,39,40,42,43}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It probably doesn't make sense to continue if the CK804 isn't found, and
doing so would perform uninitialized reads of the busn and io_base
arrays anyway, so let's return early.
Change-Id: I13c663314496caf51a57da7f27f9ea24e3d7fcbd
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1370586
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For files built in ramstage and smm -classes, testing
for !__PRE_RAM__ is redundant.
All chip_operations are exluded with use of DEVTREE_EARLY
in static devicetree, so garbage collection will take care
of the !__SMM__ cases.
Change-Id: Id7219848d6f5c41c4a9724a72204fa5ef9458e43
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some files under src/ec are built for both ramstage
and SMM. This change provides declarations of the
required struct to have __SMM__ guards removed from
those files.
Change-Id: Ic0c01a11f29381153f19378d5bc4559db8126e00
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Id878fd33ec3d2de640d9a488058a805be3ccd223
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I123db3a51a8f354359e8ed5040d23111ea4eb8a4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
In addition to zero IccMax specified by mainboard with socketed CPU, allow
a zero LoadLine default.
The SoC code will fill in the default AC/DC LoadLine values are per
datasheets:
* "7th Generation Intel® Processor Families for H Platforms, Vol 1"
Document Number: 335190-003
* "7th Generation Intel® Processor Families for S Platforms and
Intel ®Core™ X-Series Processor Family, Vol 1"
Document Number: 335195-003
The AC/DC LoadLine is CPU and board specific.
TODO: Find out how to get the LoadLine from vendor firmware and find out
how to map those to different CPU LoadLines.
Change-Id: I849845ced094697e8700470b4af95ad0afb98e3e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34938
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Datasheets used:
* "7th Generation Intel® Processor Families for H Platforms, Vol 1"
Document Number: 335190-003
* "7th Generation Intel® Processor Families for S Platforms and
Intel ®Core™ X-Series Processor Family, Vol 1"
Document Number: 335195-003
This allows mainboards to specify a zero IccMax, which all mainboards with
socketed CPU should do.
Change-Id: I303c5dc8ed03e9a98a834a2acfb400022dfc2fde
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34937
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use a switch case to find the correct VR config.
The following commit will add more entries for which a lookup table
isn't the best solution.
Change-Id: Ib11c3d6e1eb339a0c7358c312a32731d835e7c73
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
Get rid of defines and hardcode values directly.
Just a cosmetic cleanup to make it more readable.
Change-Id: I3eec44b38af356c3d87235740c65e2c2f6fc5876
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: Ib74c5c8cb9197fa06b2972cb96337fedd7f85b5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I548dfa053f195b1ea87568240bf0041bb193d825
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Level trigger is recommended setting for touchscreen interrupt of
kohaku, so we would change it as the recommedation.
BUG=b:139179200
BRANCH=none
TEST=Verified touchscreen works on kohaku
Change-Id: Ibbcdbe3ab555d014048f66ff527e539c5b566187
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I91d5a0fa0b5e4575d03eb083fade43f6dbb94c77
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These are only referenced inside auto-generated static.c
files, and util/sconfig also generates the declarations
automatically from source file pathnames.
Change-Id: Id324790755095c36fbeb73a4d8f9d01cdf6409cb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34979
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I11027acb11a4656536384134d0caebd14b63770c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|