summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-11-26soc/mediatek/mt8186: Add support for regulator VPROC12/VSRAM_PROC12Rex-BC Chen
To raise little CPU frequency, add support for VPROC12 and VSRAM_PROC12 of MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: I718fdf36d34969a6e21ddc8c1ec6f525e0e20904 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: configure GPIOsRex-BC Chen
Configure Chromebook specific GPIOs, including EC_AP_INT, EC_IN_RW, GSC_AP_INT, EN_SPK, GPIO_AP, and GPIO_RESET. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I76bde75788889111c0a051eed731dadc9898c0e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26ec/google/chromeec: Support 5 temperature sensorsTim Wawrzynczak
Some boards with the chrome EC will need to support more than 4 temperature sensors, so modify the number of TSRs supported when generating the ACPI code. Note that the EC memory map already has support for up to 16 TSRs, so no change is required on the EC side. BUG=b:207585491 TEST=with previous patch and some test data in brya0 overridetree.cb, dump the SSDT and verify that all of the existing Methods for TSR0-TSR3 are also added for TSR4, as well as all Notify, etc. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Id002230bc872b0f818b0bf2b87987298189c973d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59633 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-26dptf: Add support for one more temperature sensorTim Wawrzynczak
Some boards may use more than 4 temperature sensors for DPTF thermal control, so this patch adds support for one more temperature sensor. BUG=b:207585491 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ibf9666bade23b9bb4f740c6c4df6ecf5227cfb45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-11-26mb/google/brya/var/kano: swap TPM i2c with TS i2c for the next build phaseDavid Wu
Kano EVT will exchange i2c port for touchscreen and cr50. BUG=b:195853169 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I500f0721689ca66b65b8fb1deb79bef2bd988465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-26soc/mediatek: log watchdog statusRex-BC Chen
Reveal watchdog status value on bootblock stage. BUG=b:207646327 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2c5ad222a41085616565dd5c10b0e967bb64ec63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-25mb/google/brya/variants/primus: update gpios for power consumptionMalik_Hsu
In different sku, some unused GPIO pins are processed by NC for power consumption. BUG=b:196790249 TEST=emerge-brya coreboot chromeos-bootimage and check power Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I753e41dec1825299e6cd437b5f67e2d957bc6148 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25src/mb/brya: Enable crashlog on brya0Kane Chen
Enabling crashlog helps partners to debug hang issues efficiently. BUG=b:195327879 TEST=Found BERT table is created and the tcss function is ok in depthcharge. Warm/cold/suspend_stress test pass 50 cycles on gimble Change-Id: Ib4bbe5d7cece0c6c5fc170460d55ac820054abb9 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25emulation/qemu-i440fx: Use a 4MB ROM by defaultSimon Glass
At present the default ROM for for QEMU is too small for U-Boot to fit. Add a condition to catch this and expand it to a 1MB ROM. This allows booting U-Boot under emulation. It also matches the size used by other emulation boards. Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: Ia1a8c1109e3ece5fec56255173a2d19d4a130bcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/59604 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-25mb/google/brya/variants/primus: add fw config probe for speaker ampMalik_Hsu
Added fw config probe for MX98360A. BUG=b:205883511 TEST=emerge-brya coreboot chromeos-bootimage and check audio function Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I2452b752ce58a5d0f1008cf187fb79ace6c4285f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/intel/alderlake: Add ADLP 4+4+2 power configurationsCurtis Chen
Map existing PCI_DEVICE_ID_INTEL_ADL_P_ID_1 to ADLP 4+4+2 45W SKU power related settings. Per doc#626774 ADL_MOW_WW46_2021, update PD optimization relaxation for ADL-P 482(28W) and 442(45W). BUG=b:193864533 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: Ieba738a8ad3da5ae0a115feaa275b997a219d731 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/amd/*/data_fabric: use DF_ prefix for bit and shift definesFelix Held
Adding the DP_ prefix to the defines for MMIO_NP, MMIO_WE and MMIO_RE clarifies the scope of those definitions. For consistency also add this prefix to MMIO_DST_FABRIC_ID_SHIFT. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a509ccc071aa51a67552fb9e7195358a76fe4dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/*/include/data_fabric: make MMIO_NP definition SoC-specificFelix Held
On Picasso the MMIO_NP bit in the D18F0_MMIO_CTRL0 data fabric register is bit 12, but that has changed to bit 16 in Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I64c06b84e2c0737b259077e7932f418306638e19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/aoac: fix typo in FCH_AOAC_REF_CLK_OK_STATE definitionFelix Held
The bit is called REF_CLK_OK_STATE and not RST_CLK_OK_STATE, so change the name of the define to FCH_AOAC_REF_CLK_OK_STATE. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iae26db94d83ebb2cb799f6d3e0bec37c8e849219 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: add missing de-glitching definesFelix Held
There were only definitions for removing low, high or both glitches, but not to not remove glitches, so add this too for completeness. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I650f7754546935539339c02bb6a94bb3f855d4ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/59631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: rework de-glitching definesFelix Held
I found the name of the DEB_GLITCH_NONE definition a bit misleading, so change it to DEB_GLITCH_REMOVE which should clarify what this will do. The description for this value in the PPR/BKDG is "Remove glitch". This also puts the define in line with GPIO_DEB_REMOVE_GLITCH which is the only place where DEB_GLITCH_NONE/DEB_GLITCH_REMOVE is used. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I59648710e0ff28c2026e1b2cc7e433cafb2f2807 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: use tabs for indentationFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibf7482d20c6d27b2314ec8a31c349eb90c8a8feb Reviewed-on: https://review.coreboot.org/c/coreboot/+/59629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25mb/google/brya/var/felwinter: Add DPTF parameters for FelwinterJohn Su
The DPTF parameters were verified by the thermal team. BUG=b:207463762 BRANCH=brya TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I634d6d98c28e75ad41488921df6b8e836e253ff1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25commonlib/cbmem_id.h: Add names for some IDsAngel Pons
Some IDs don't have an associated name. Add them. Change-Id: I1033dd0cecff417b65001f25f6cc4101b603bd9b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59617 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-25commonlib/cbmem_id.h: Fix typo in macro nameAngel Pons
Rename `CMBMEM_ID_ACPI_HEST` to `CBMEM_ID_ACPI_HEST`. Change-Id: I3e680244c9573f566b51298462c324e062ab4657 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59616 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Patrick Georgi <patrick@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-25soc/amd/common/block/gpio: drop unused gpio_get_addressFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5b47324af368f81288e9e9be65fe0f1ae2fa3697 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/acpi/gpio_bank_lib: drop unused methodsFelix Held
Those methods were only in the non-common Stoneyridge GPIO ACPI code that got dropped, so drop those unused methods too. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I519d88ffa1d5d4823cce4876ecf59b9019f676e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: drop unused GPIO_PIN_IN/OUTFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idf00879701b223ecaca74aef2a51a1b86d2c6ce3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/stoneyridge: use SOC_AMD_COMMON_BLOCK_ACPI_GPIOFelix Held
Stoneyridge uses the same GPIO bank peripheral as Picasso and Cezanne so we can use the common AMD SoC GPIO ACPI code. TEST=none Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifa1fc923cd5b779765917b171b5a7222f18a176a Reviewed-on: https://review.coreboot.org/c/coreboot/+/59596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: de-duplicate pin status bit defsFelix Held
De-duplicate the definitions for the pin status bit and use this new definition in both the C and the ACPI code. TEST=Timeless build results in identical image for amd/mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8b0fe7dbec5dac176cdfa9690862433f202fb552 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: drop duplicate wake bit defsFelix Held
The GPIO_WAKE_* definitions are the ones that are used in the code, so drop the unused GPIO_*_WAKE_EN definitions for the same bits. Also move the GPIO_WAKE_* definitions to the place the GPIO_*_WAKE_EN ones were before this patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I622673cc72107908b525a65212061062f32e13dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: use bit definitions for masksFelix Held
All bits covered by the bit masks GPIO_INT_ENABLE_MASK, GPIO_PULL_MASK, GPIO_STATUS_MASK and GPIO_WAKE_MASK already have definitions in the code so use those instead of magic numbers. TEST=Timeless build results in identical image for amd/mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0bc9e1cecf2f063b42de3f8875fee421dd256648 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: remove unneeded line breakFelix Held
The definitions of GPIO_INT_ENABLE_STATUS_DELIVERY and GPIO_TIMEBASE_62440uS fit into 96 characters, so remove the unneeded line breaks. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4b9c3885259b9acf0539eed14e23fbbb0deccea7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: drop 8k pullup defineFelix Held
The corresponding bit is marked as reserved in the following versions of the documentation for all SoCs using this code: Mullins: BKDG #52740 Rev 3.05 Stoneyridge: BKDG #55072 Rev 3.04 Raven1, Picasso: PPR #55570 Rev 3.16 & 3.18 Raven2: PPR #55772 Rev 3.08 Cezanne: PPR #56569 Rev 3.03 The old Rev 3.14 of the Picasso PPR #55570 had the bit 19 defined as PullUpSel, but this is no longer the case in newer versions. It is unclear if this got de-featured or if it was never present in the silicon. To be consistent with the current documentation, drop this define. This patch also change the definition of GPIO_PULL_MASK to only cover the bits used for the feature. The Cezanne PPR #56569 Rev 3.03 states a default value of 0 for this bit after reset, so the resulting values in the register aren't expected change. The other PPRs/BKDGs don't specify a reset value for this bit, but it's likely safe to assume that all SoCs that use the new GPIO interface use the same GPIO building block. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaf2d4eec7a13e558c75d7edea343b876909a5b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/intel/adl: Modify SOC_INTEL_ALDERLAKE_DEBUG_CONSENT default valueKane Chen
On ADL, we actually use debug consent 2 for soc debug by DBC Change-Id: Ie6fbf3cdcf5dcd1a11a895ea83f55157a2ac4eb9 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/intel/elkhartlake: Update SA DIDs TableRick Lee
Update SA table as per latest EDS (Doc no: 601458). Add extra SKUs accordingly. Signed-off-by: Rick Lee <rick.lee@intel.com> Change-Id: Ia2bb9e54456dbea634c2b8e192f9fe813b9e6706 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Lean Sheng Tan Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
2021-11-25mb/google/brya/var/primus: Update thermal table for primusAriel_Fang
- Add 4 TEMP_SENSORs - Configure granularity of power limits BUG=b:200836803 TEST=USE="project_primus emerge-brya coreboot" and verify it builds without error. Signed-off-by: Ariel_Fang <ariel_fang@wistron.corp-partner.google.com> Change-Id: Id4d8dbe678b7f0870aeffa0a0118e65de9d5c22d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-11-25mb/google/brya/var/kano: Update thermal tableDavid Wu
Update thermal setting from thermal team. BUG=b:205648035 TEST=build and verified by thermal team. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If5082462b79c88ecf510f7a552381c792604366e Reviewed-on: https://review.coreboot.org/c/coreboot/+/59572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-11-25arch/{arm,arm64,ppc64,riscv}: Add noop cpu_relaxRaul E Rangel
The cpu_relax method is defined for x86. This CL adds a no-op method so that it can be used in common code. BUG=b:179699789 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifcb4546ceb2894eeb37589d0282b7e076d7a4747 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-25soc/intel/graphics/Kconfig: Guard optionsArthur Heymans
Change-Id: I3c252e31867e4560fb5aaf12273288f4ff18ae3d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-11-25mb/google/brya/var/kano: set power limits for thermalDavid Wu
Set power limits for kano based on CPU SKUs. BUG=b:205648035 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I25cf9be68f8981d8307b4c15ab9f65b59058fb19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/intel/common/thermal: Refactor thermal block to improve reusabilitySubrata Banik
This patch moves common thermal API between chipsets with thermal device as PCI device and thermal device behind PMC into common file (thermal_common.c). Introduce CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV to let SoC Kconfig to select as applicable for underlying chipset. +------------------------------------------------------+--------------+ | Thermal Kconfig | SoC | +------------------------------------------------------+--------------+ | CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV | SKL/KBL, CNL | | | till ICL | +------------------------------------------------------+--------------+ | CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC | TGL onwards | | | ICL | +------------------------------------------------------+--------------+ Either of these two Kconfig internally selects CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL to use common thermal APIs. BUG=b:193774296 TEST=Able to build and boot hatch and adlrvp platform. Change-Id: I14df5145629ef03f358b98e824bca6a5b8ebdfc6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-24mb/google/brya/var/gimble: Enable DRIVERS_GENESYSLOGIC_GL9750Mark Hsieh
Enable DRIVERS_GENESYSLOGIC_GL9750 support for Gimble. BUG=b:206014046 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ifc490e6e081b6a8534656417603d2916c3edcb05 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59579 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-24soc/amd/common/block/include/acpi: fix reference to main acpi includeFelix Held
commit e0844636aca974449c7257e846ec816db683d0b9 (acpi: Move ACPI table support out of arch/x86 (2/5)) moved the main acpi header file from arch/x86/include/acpi/acpi.h to include/acpi/acpi.h, so change the comment in here to point to the current location. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5fddd1cd5eefd83816b1c966b5c7edf53eb2486d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/amd/common/block/include/gpio_defs: add GPIO IRQ status registersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I585691038690f1d6855ab09f1ca5791a18cfdbfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/59590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/amd/common/block/include/gpio_defs: use lower case in hex numbersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icb1c7b243f655225347ba2a78c80e6e8653e8cda Reviewed-on: https://review.coreboot.org/c/coreboot/+/59589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/amd/picasso,stoneyridge/acpi: use define for RTC_DATE_ALARMFelix Held
Cezanne already uses a define for this and it's better to define and use constants instead of magic values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifa4b3b3cdb161670128b284a3396fc5a85545608 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24drivers/i2c/tpm: Fix blank default statementKarthikeyan Ramasubramanian
CB:59479 introduced a blank default statement. This is treated as an error or warning on some older toolchains. Add a break statement on default case. BUG=None TEST=Build the Guybrush mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I3d034cfebc8b8ae7d7024d41b4b2207cdeb083e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-24soc/intel/elkhartlake: Disable Intel PSE by defaultLean Sheng Tan
Disable PSE loading by default. If left enabled (current default), the EHL coreboot will end up in endless restart loop, due to FSP unable to locate PSE FW image and trigger global reset. However disabling this flag (PchPseEnable) will cause the coreboot to trigger a single reset due to CSE signal (HECI: CSE does not meet required prerequisites). The reason behind this is that FSP need to perform static disabling (power gate) to fully shut down PSE HW, and to do this will need to global reset entire system including CSE. Then PMC will power gate PSE from the start. To avoid this behavior, the best way to disable PSE is to disable via IFWI FIT softstrap (For specific detail can refer to Intel EHL coreboot MR2 release notes). With this, PMC will power gate PSE from the first cold boot and system will boot happily without single reset behavior. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Iccc0ab1c2e4ebb53013795933eb88262f70f456f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-23mb/lenovo: Enable MEI on Sandy Bridge ThinkPadsEvgeny Zinoviev
It was already enabled on T520 and L520, but disabled on X220, T420 and T420s. On X220, it was disabled by commit 0793afe9 (mb/lenovo/x220: disable ME). I can't reproduce those issues today on linux 4.4 and linux 5.13. Also, it breaks the me_disable feature, we already have a Kconfig option to hide MEI in case of errors, and it will be hidden on disabled, recovery, firmware update paths anyway. Change-Id: I8e6d067a9c728443d00df541ac7a9a878df58b6a Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2021-11-23mb/prodrive/hermes: Number Ethernet devicesAngel Pons
The Prodrive Hermes mainboard has four i211 Ethernet NICs and an i210 Ethernet NIC, but their numbering isn't consistent with the PCIe root port function numbers. With only a M.2 SSD plugged in, Linux uses the following names: PHY 0 ---> enp6s0 PHY 1 ---> enp4s0 PHY 2 ---> enp3s0 PHY 3 ---> enp1s0 PHY 4 ---> enp2s0 These names change after adding or removing PCIe devices in slots connected to root ports that get enumerated before the NICs' root ports, because the assignment of secondary bus numbers depends on the enumeration order. Because of this, the "predictable" network interface names are not at all predictable, which is awful. To avoid this, describe the NICs using SMBIOS Type41 entries with the correct instance numbers. With this patch, Linux uses these names: PHY 0 ---> eno0 PHY 1 ---> eno1 PHY 2 ---> eno2 PHY 3 ---> eno3 PHY 4 ---> eno4 No matter what PCIe devices are present, these names don't change. Change-Id: I7a527298f84172f9135006083ad7e748dcc27911 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58628 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-23mb/dell/optiplex_9010/devicetree.cb: Enable missing GPEsMichał Żygowski
Enable PCI_EXP_EN, PME_EN and PME_B0_EN GPEs used for PCI devices. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I4480921a294f35a0dfe1e5acd90d55f6fb4c85b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-11-23mb/dell/optiplex_9010/Kconfig: Select Super I/O UART availabilityMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ie1b270d49660fd60b6a91194167467c4453e1b6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-11-23mb/system76/*: Enable dGPU temp/fan reportingTim Crawford
Select the EC option on boards with dGPUs to report GPU temperature and fan data. Tested on system76/oryp6. The GPU fan speed is reported in sensors when the system is under load. system76_acpi-acpi-0 Adapter: ACPI interface CPU fan: 1985 RPM GPU fan: 2348 RPM CPU temp: +68.0°C GPU temp: +0.0°C Change-Id: Ieb45dc277c7eb11be1c50b9a9e3e20e3a88578b7 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-23ec/system76/ec: acpi: Add dGPU thermal reportingJeremy Soller
Add a new config for boards with dGPUs to enable reporting fan duty and temperature. The dGPU is not yet enabled on any boards, so it always reports the temp as 0. However, the EC firmware does use the dGPU's fan and so reports valid information for fan speed. Change-Id: Iae1063ee6a082a77ed026178eb9471bbc2b2fadf Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-23mb/system76/*: Disable IME by CMOS optionTim Crawford
Add CMOS option to set IME mode. Default to "Disable" for CNL and TGL-H, and "Enable" for TGL-U. Not set for KBL, which uses ME_CLEANER. The HECI device must be enabled in devicetree for switching modes to function correctly. Change-Id: I3163dcb0a4af020c2cf6f94f2bb26380f17c253e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-23soc/intel/alderlake: remove tmp bar assignment for cpu crashlogKane Chen
When the cpu_cl_discovery is called, coreboot actually assigns a BAR to cpu crashlog pci device. Hence, we don't need to assign a tmp BAR for cpu crashlog pci device BUG=b:195327879 TEST=Found BERT table is created and the tcss function is ok in depthcharge Change-Id: Ib7e6772be51ec4f26ef31fed6cb2bddef8ffc6be Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-23mb/google/brya/var/redrix: Disable autonomous GPIO power managementWisley Chen
With cr50 fw 0.3.22 or older version, it needs to disable autonomous GPIO power management and then can update cr50 fw successfully. BUG=b:202246591 TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage. Change-Id: Idc01ebb4d3ef990f24f18bef5424b7d6ba683d49 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-23emulation/qemu-i440fx,q35: avoid writing to ROMJulian Stecklina
libcbfs has a workaround to avoid writing to ROM areas: /* Hacky way to not load programs over read only media. The stages * that would hit this path initialize themselves. */ if ((ENV_BOOTBLOCK || ENV_SEPARATE_VERSTAGE) && !CONFIG(NO_XIP_EARLY_STAGES) && CONFIG(BOOT_DEVICE_MEMORY_MAPPED)) { This workaround is not triggered in QEMU, because BOOT_DEVICE_MEMORY_MAPPED is only selected for SPI boot devices. This results in confusing (to the VMM developer) writes to read-only memory. As far as I can tell, this issue is weird but harmless, because the code does memcpy to ROM with source == destination. The concensus in the mailing list thread [1] was that it's worthwhile to be fixed regardless. [1] https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/message/KDI6YQCPXSQF4NDUAAC7TIXQKSZ6T4X7/ Change-Id: I5cefbc31f917021236105f7dc969118d612ac399 Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-23mb/google/trogdor: change pin define for quackingstickSheng-Liang Pan
change TP_EN pin to GPIO_67 for quackingstick BUG=b:206862167 BRANCH=trogdor TEST=make Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I7cc1083111f46cd3489cbbb9e579c34dc972b0b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Bob Moragues <moragues@google.com>
2021-11-23drivers/genesyslogic/gl9750: Add driver for Genesys Logic GL9750Ben Chuang
The device is a PCIe Gen1 to SD 3.0 card reader controller to be used in the Chromebook. The datasheet name is GL9750S and the revision is 01. The patch disables ASPM L0s. BUG=b:206014046 TEST=Verify GL9750 enters L1 by observing CLKREQ# de-asserts. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I6d60cef41baade7457a159d3ce2f8d2e6b66e71c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22cpu/intel/hyperthreading: Add missing header <arch/cpu.h>Raul E Rangel
This file is using cpuid_result and cpuid(). I also removed the spinlock header since it's not used. This is what was previously providing the cpu.h header. BUG=b:179699789 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idc3daa64562c4a4d57b678f13726509b480ba050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-11-22drivers/tpm: Add firmware-power-managed DSD propertyRob Barnes
Introduce firmware-power-managed DSD ACPI property for TPM devices. This property can be checked by the kernel TPM driver to override how the TPM power states are managed. This is a tri-state flag, true, false, or unset. So an enum used to keep the flag is unset by default. When firmware-power-managed is true, the kernel driver will not send a shutdown during s2idle/s0i3 suspend. BUG=b:200578885 BRANCH=None TEST=TPM shutdown is triggered on s0ix suspend on guybrush with patched kernel Change-Id: Ia48ead856fc0c6e637a2e07a5ecc58423f599c5b Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-22soc/amd/psp_verstage: Init TPM on S0i3 resumeRob Barnes
Add option to initialize the TPM in PSP verstage during s0i3 resume. This is needed if the TPM is reset in s0i3. FSDL is handling restoring everything else, so only the minimum TPM initialization is done. Move aoac and i2c init before psp_verstrage_s0i3_resume becasue i2c needs to be ready before attempting to restore tpm. BUG=b:200578885,b:197965075 TEST=Multiple cycles of S0i3 suspend resume. ~66ms of additional delay. BRANCH=None Change-Id: Ie511928da6a8b4be62621fd2c4c31a8d1e724d48 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-22mb/prodrive/hermes: Rename "internal audio" settingAngel Pons
The "internal audio connection" setting is actually about the front panel audio. Rename functions and variables to reflect this. Change-Id: I1be8f68ac3e8b91bc4983dc06daa37afb7bdf926 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin van Son <justin.van.son@prodrive-technologies.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-22ec/google/chromeec: Add PLD to EC conn in ACPI tableWon Chung
Given EC CON and associated USB port objects, custom_pld or pld_group information is retrieved from port and added to ACPI table as _PLD field for typec connector. BUG=b:202446737 TEST=emerge-brya coreboot & SSDT dump in Brya test device Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Ibc56ecd4e8954ffaace3acd9528a064b5fa2cf6f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22mb/intel/adlrvp: Use dedicated VBT files for ADL-MBernardo Perez Priego
ADL-M has its own set of VBT files to pick during execution, this will avoid any conflict with other ADL variants. VBT files added at chrome-internal:4138272 BUG=None TEST= Boot device on LP5/LP4, corresponding VBT file should be loaded. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ibbf3f11c9277f5dcb3e12f9020f54ec843444c3f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-11-22arch/ppc64/include/arch/io.h: implement IO functionsMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> arch/ppc64/include/arch/io.h: use proper instructions for IO operations Those instrunctions are: * Load {byte,half,word} and Zero Caching Inhibited indeXed (l*zcix) * Store {byte,half,word} Caching Inhibited indeXed (st*cix) for in* and out*, respectively. Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> arch/ppc64/include/arch/io.h: implement istep reporting Change-Id: Ib65c99888ba2e616893a55dff47d2b445052fa7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-22drivers/uart: Let DRIVERS_UART_8250IO also depend on PPC64Krystian Hebel
There seems to be no operational differences between x86 and PPC64 for UART 8250. Port number is the same. References: * https://github.com/open-power/docs/issues/25 * https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/porting.md#enabling-console Tested on Talos II (https://raptorcs.com/TALOSII/). Works in QEMU as well (actually in QEMU it works even without this change somehow). Change-Id: Ib06001076b8eaa577a8d2159afea20afb610687d Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-22eventlog: Add a log type for Chrome OS diagnosticsHsuan Ting Chen
Add events for Chrome OS diagnostics in eventlog tool: * ELOG_TYPE_CROS_DIAGNOSTICS(0xb6): diagnostics-related events * ELOG_CROS_LAUNCH_DIAGNOSTICS(0x01): sub-type for diagnostics boot These events are not added anywhere currently. They will be added in another separate commit. Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: I1b67fdb46f64db33f581cfb5635103c9f5bbb302 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-22soc/intel/cannonlake: Fix PEG1 _PRT generationArthur Heymans
Some weird things happen inside FSP and the routing is not correctly applied, with PIN D being used but lacking a proper routing in ACPI. To work around this issue generate _PRT for all 4 INT pins. Change-Id: I5be6e4514f8c6a47bb887d9f9b95181c9f426a51 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22mainboard/google/brya: Enable dev screen in bios-stage for BraskAdam Liu
Add Kconfig item ENABLE_TCSS_DISPLAY_DETECTION. TEST=Build with the VBT provided in issue b:199490251. Check the dev screen in bios-stage. BUG=b:199490251, b:206014054 Signed-off-by: Adam Liu <adam.liu@quanta.corp-partner.google.com> Change-Id: I5f34be030a6d819a0e93a2d479c4ff41bb14cfe2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22mb/google/brya: Move cr50 configuration to variantDavid Wu
Brya schematic will swap TPM I2C with touchscreen I2C, so move into variant level. BUG=b:195853169 TEST=build pass. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie5276527da135ec15045a81985ae006722871b0b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59472 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22mb/google/brya/variants/primus: add fw_config_probe for ALC5682I-VSMalik_Hsu
Added fw_config_probe method to distinguish different audio codecs to facilitate the use of different topology files by the OS. BUG=b:205883511 TEST=emerge-brya coreboot chromeos-bootimage and check audio function Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I0d5b95e89154b2cb6b371f24cc1b151c23ff642f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22mb/google/brya/var/felwinter: Add ALC5682I-VS codec supportEric Lai
ALC5682I-VS will use in next build. BUG=b:194367025 TEST=none. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I34d736fe1c39860443dac07435a21ccd0ee2f21c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22mainboard/starlabs: Add StarBook Mk VSean Rhodes
Tested using MrChromeBox's `uefipayload_202107` branch: * Windows 10 * Ubuntu 20.04 * MX Linux 19.4 * Manjaro 21 No known issues. https://starlabs.systems/pages/starbook-specification Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I090971a9e8d2be5b08be886d00d304607304b645 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56088 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-22mb/google/dedede/var/bugzzy: Configure Acoustic noise mitigation UPDsSeunghwan Kim
Enable Acoustic noise mitigation for bugzzy and set slew rate to 1/8 which is calibrated value for the board. BUG=b:207046230 BRANCH=dedede TEST=build firmware to UPD and Acoustic noise test Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: Id249a143efb9bce70f48fb466fed42e766a10937 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-22soc/intel: Allow enable/disable ME via CMOSSean Rhodes
Add .enable method that will set the CSME state. The state is based on the new CMOS option me_state, with values of 0 and 1. The method is very stable when switching between different firmware platforms. This method should not be used in combination with USE_ME_CLEANER. State 1 will result in: ME: Current Working State : 4 ME: Current Operation State : 1 ME: Current Operation Mode : 3 ME: Error Code : 2 State 0 will result in: ME: Current Working State : 5 ME: Current Operation State : 1 ME: Current Operation Mode : 0 ME: Error Code : 0 Tested on: KBL-R: i7-8550u CML: i3-10110u, i7-10710u TGL: i3-1110G4, i7-1165G7 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I374db3b7c0ded71cdc18f27970252fec7220cc20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22ec/starlabs: Add standardised ITE EC supportSean Rhodes
Add EC support that supports different Q Events and EC memory. Created from the ITE IT5570E and IT8987E datasheets, all using data port 0x4e. Tested with Ubuntu 20.04.3 and Windows 10 on: * StarBook Mk V (TGL + IT5570E): * ITE Firmware 1.00 * Merlin Firmware 1.00 * LabTop Mk IV (CML + IT8987E): * ITE Firmware 1.04 * LabTop Mk III (KBL + IT8987E): * ITE Firmware 3.12 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I8023c26de23c874c84106fda96e64dcfa0c5ba32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58343 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-22soc/intel/{adl,ehl,jsl,tgl}: Remove unused header `thermal.h`Subrata Banik
This patch removes unused header inclusion as <intelblocks/thermal.h> from several SoC finalize.c files. Change-Id: Ic9ac0ffb352686af22cc9d11b61f904238eef278 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-20soc/intel/alderlake: Hook up common code for thermal configurationSubrata Banik
Thermal configuration registers are now located behind PMC PWRMBASE for Alder Lake Point PCH. Hence, ADL SoC to select SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC to let thermal low threshold is being set as per mainboard provided `pch_thermal_trip`. Note: These thermal configuration registers are RW/O hence, setting those early prior to FSP-S helps coreboot to set the desired low thermal threshold for the platform. BUG=b:193774296 TEST=Dump thermal configuration registers PWRMBASE+0x150c etc. prior to FSP-S shows that registers are now programmed based on 'pch_thermal_trip' and lock register BIT31 is set. Change-Id: I0f972f47845c123f4f74fd75091c9703d54db796 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59271 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/alderlake: Set `pch_thermal_trip` for Dynamic Thermal ShutdownSubrata Banik
Set low maximum temp threshold value used for dynamic thermal sensor shutdown consideration. BUG=b:193774296 Change-Id: I7ee199c19a9d926a4135eeef3b3b481fbff74a79 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-20soc/intel/common/thermal: Allow thermal configuration over PMCSubrata Banik
Thermal configuration has evolved over PCH generations where latest PCH has provided an option to allow thermal configuration using PMC PWRMBASE registers. This patch adds an option for impacted SoC to select the Kconfig for allowing thermal configuration using PMC PCH MMIO space. BUG=b:193774296 TEST=Able to build and boot hatch and adlrvp platform. Change-Id: I0c6ae72610da39fc18ff252c440d006e83c570a0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59209 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20ec/starlabs: Remove old EC codeSean Rhodes
Remove old code in favour of new format of firmware API. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iaf8f37a08c232b8754e57f022782f21284fa07dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-20soc/intel/common/thermal: Use `clrsetbits32()` for setting LTTSubrata Banik
This patch uses `clrsetbits32` helper function to set thermal device Low Temp Threshold (LTT) value. BUG=b:193774296 TEST=Able to build and boot hatch and adlrvp with this change. Change-Id: I51fea7bd2146ea29ef476218c006f7350b32c006 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59310 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/common/thermal: Hook up IA thermal block to romstageSubrata Banik
This patch ensures IA common thermal block is now able to compile under romstage with necessary compilation issues fixed. BUG=b:193774296 Change-Id: I3279f55436977ab9a47e04455d8469e50b5c33c8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59391 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/common/thermal: Drop unused parameter of pch_get_ltt_value()Subrata Banik
`struct device *dev` as part of the pch_get_ltt_value() argument is being used hence, replace with `void`. BUG=b:193774296 Change-Id: Iecdf6f6c3023f896a27e212d7c59b2030a3fd116 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59390 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-19soc/intel/alderlake: Update the VccIn Aux Imon IccMax for ADL-MBora Guvendik
This patch updates the VccIn Aux Imon IccMax for ADL-M Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I21753f2e5e9867f22c05e087cbf1f1e097d28bca Reviewed-on: https://review.coreboot.org/c/coreboot/+/57325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-19mb/google/brya: Move EC_HOST_EVENT_USB_MUX wake event to S0ix onlyJoey Peng
If a USB_MUX_EVENT happens while the AP is in S3 during powerdown transtion (S0->S3->S5), this will cause the device to boot again after it has finished sequencing down to S5. Since S3 is not POR for ChromeOS devices anymore, change this event to wake from S3 and S0ix to just S0ix. BUG=b:206867635 TEST=emerge-brya coreboot Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Icdab40b6a845a34246d7da336f43e970f7908301 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-19security/vboot: Add NVRAM counter for TPM 2.0Miriam Polzer
Create an NVRAM counter in TPM 2.0 that survives owner clear and can be read and written without authorization. This counter allows to seal data with the TPM that can only be unsealed before the counter was incremented. It will be used during Chrome OS rollback to securely carry data across a TPM clear. Signed-off-by: Miriam Polzer <mpolzer@google.com> Change-Id: I511dba3b3461713ce20fb2bda9fced0fee6517e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-19mb/google/volteer/var/chronicler: set DdrMemoryDown enableSheng-Liang Pan
as doc #632048, there is a fix in MRC for this sighting but DdrMemoryDown need to be set to 1. BUG=b:192478111 BRANCH=volteer TEST=FW_NAME=chronicler emerge-volteer coreboot chromeos-bootimage Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: If7ead2d0bb2955a4f1b81d012ee2e2518b2a82e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59373 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-19mb/google/brya/var/redrix: Configure _DSC for CAM devices to ↵Varshit B Pandya
ACPI_DEVICE_SLEEP_D3_COLD Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot and prevent privacy LED blink. BUG=b:199823938 TEST=Build and boot redrix to OS. Verify entries in SSDT and monitor LED during boot. Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I88ea1b87698c63e1bd69367ee857fba3f25c84ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/59260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-19driver/intel/mipi_camera: Add support for _DSC fieldVarshit B Pandya
The _DSC (Device State for Configuration) object evaluates to an integer may be used to tell Linux the highest allowed D state for a device during probe. The support for _DSC requires support from the kernel bus type if the bus driver normally sets the device in D0 state for probe. The D states and thus also the allowed values for _DSC are listed below. Number State Description 0 D0 Device fully powered on 1 D1 2 D2 3 D3hot 4 D3cold Off More details can be found here https://lkml.org/lkml/2021/10/25/397 BUG=none BRANCH=none TEST=Add corresponding field in brya, boot and dump SSDT to check if _DSC field is as per expectation. Name (_ADR, Zero) // _ADR: Address Name (_HID, "OVTI8856") // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Name (_DDN, "Ov 8856 Camera") // _DDN: DOS Device Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Method (_DSC, 0, NotSerialized) { Return (0x04) } Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I5471f144918413a2982f86beaf3dbf7e4e66cc9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-19mb/intel/adlrvp: Enable CPU PCIe RP 2Meera Ravindranath
Disabling CPU PCIe RP 2 (commit:3fd39467b Fix S0ix regression) causes regression in NVMe boot on ADL-P RVP boards. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0b8b76a5537d8b80777cb7588ce6b22281af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59392 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-18drivers/fsp: Rewrite post code hex values in lowercaseSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I65a83fcd69296f13c63329701ba9ce53f7cc2cb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-18mb/google/guybrush: Add variant_tpm_gpio_tableRob Barnes
Add separate gpio table for TPM i2c and interrupt. Remove TPM gpios from early_gpio_table. This allows for initializing TPM gpios separately from other gpios. BUG=b:200578885 BRANCH=None TEST=Build and boot guybrush Change-Id: I51d087087b166ec3bb3762bc1150b34db5b22f2f Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59083 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-18mb/google/brya/var/felwinter: Correct USB3 TCSS settingEric Lai
Based on Intel Kit#615686, USB3 only needs to disable TBT and DMA per port. And if uses USB3 directly you need to set TcssAuxOri accordingly. BUG=b:206716691,b:205235144 TEST=USB function work as expected at USB3 only sku. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I303d042d6c80194ff48130fe4e9c04b49ca13ee8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18mb/google/brya/var/gimble: Include 2 new SPDsMark Hsieh
Add SPD support to gimble for LPDDR4 memory part MT53E1G32D2NP-046 WT:B and MT53E512M32D1NP-046 WT:B. BUG=b:191574298 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Id3fc35605675b953bf993a29f35140f7721eedab Reviewed-on: https://review.coreboot.org/c/coreboot/+/59299 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-18mb/google/brya/var/redrix: De-assert SSD PERST# in romstageWisley Chen
After CB:57539 applied, it can support romstage GPIO table override. We can move SSD PERST# de-assertion to romstage. The reason for this is to give enough time after PERST# deassertion so that the SSD has enough time to initialize before the FSP scans the RPs for downstream devices. BUG=b:199714453 TEST=build Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I242cb1517f564d9d135d523b1e7f95ac34d601f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18mb/google/brya/var/redrix: Correct WWAN power sequenceWisley Chen
Correct the WWAN power sequence to meet spec BUG=b:206079177 TEST=build Change-Id: Ibba1ecc04b563ae4eedd7596594f33812cbac150 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18mb/google/brya/var/redrix: Configure Acoustic noise mitigationWisley Chen
Enable Acoustic noise mitigation for redrix and set slew rate to 1/8 BUG=b:204009588 TEST=build and verified by power team Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I0fc0bb68c4de6fca60ee290eb46a77200d748ca8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18soc/intel/alderlake: Add Acoustic noise mitigation UPDsWisley Chen
This patch expose the following FSP UPD interface into coreboot: - AcousticNoiseMitigation - FastPkgCRampDisable - SlowSlewRate BUG=b:204009588 TEST=build Change-Id: I0b9c18f9b40d30525028e64754dd1dc86c3b2ec6 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18amdfwtool: Call the set_efs_table for StoneyridgeZheng Bao
Related to https://review.coreboot.org/c/coreboot/+/58555 commit-id: 35b7e0a2d82ac In 58555, we added the SOC ID for Stoneyridge in amdfwtool command line. But it raised building error because it then called "set_efs_table" without setting SPI mode. So we skipped calling that. But in set_efs_table, it has case for Stoneyridge. The boards also need to have this setting. So we remove the skipping and give the proper SPI mode in mainboard Kconfig. Change-Id: I24499ff6daf7878b12b6044496f53379116c598f Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-17mb/google/brya/var/felwinter: Add MT53E1G32D2NP-046 WT:B SPDEric Lai
Add MT53E1G32D2NP-046 WT:B SPD. BUG=b:205669003 TEST=Boot up without issues. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If084a8af941b36a8f3f608271078e32b093d9108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/cyan: use shared touchpad/touchscreen interruptsMatt DeVillier
Windows (10/11) freaks out and generates an interrupt storm if two ACPI devices are enabled and share an interrupt, even when only one device is actually present. To mitigate this, mark Cyan's touchpad/touchscreen interrupts as SharedAndWake rather than ExclusiveAndWake. Test: build/boot Windows 10 on Relm, observe normal CPU usage in Task Manager for System Interrupts task when touchpad/touchscreen in use. Change-Id: I09bc878318f9fa6252f65a42ad46109418805fa0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 00:40:35 +0000