| Age | Commit message (Collapse) | Author |
|---|
|
Use sizeof instead of having a hard-coded struct length.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I85dc2fce11d9a670b2037d8a6a694177cfaa2177
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This variant uses all three EHL Ethernet GbE-TSN Controller so enable
the TSN GbE driver in order to set the needed MAC addresses. The
required function to retrieve a valid MAC address was already implement
in the common mainboard.c for mc_ehl.
TEST:
- Boot mc_ehl2 into Linux and check MAC addr via 'ip a'
Change-Id: Ia052c44feb606f9e1d31d047f2acc67e3226a895
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch provides the functionality to change the TSN GbE MAC
addresses. Prerequisite for this is a mainboard specific function that
returns a matching MAC address.
A test was performed with the next patch in the series, which enables
the TSN GbE driver for mc_ehl2 mainboard.
Change-Id: I2303a64cfd09fa02734ca9452d26591af2a76221
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
TSN runs in SGMII mode on this mainboard. This requires setting the link
speed to 1 Gbps.
Change-Id: I9f1da971b4de5671d6d38be6dbc50edbbe20d157
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This mainboard uses all three internal Ethernet GbE-TSN controllers. Two
of them are initialized by the Programmable Services Engine (PSE).
This patch enables the Serial Gigabit Media Independent Interface
(SGMII) mode for GbE PSE0 and GbE PSE1. By setting PCH PSE DMA pins to
host owned, the IO is under control of the IA processor cores through
system software.
TEST:
- Boot mc_ehl2 into Linux and check inet addr via 'ip a'
Change-Id: I74e660548b2c44d5dbdb6023d5a36cfdd7e96f43
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
To be able to make EHL Ethernet GbE-TSN Controller configurable, a
driver is required. Functionality comes in following patches.
Change-Id: I7522914c56b74486bb088280d2686acf7027d1d3
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Both option-HDMI and option-DP use the same setting of vbt,
and ABSENT is just physically remove option board from motherboard,
so it just need one vbt, and it don't need the fw_config to decide
which vbt will be return.
BUG=b:231769131
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I1f8cdcbc05ed3bc689d29261e4fd4d700326dce8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Both option-HDMI and option-DP use the same setting of vbt,
and ABSENT is physically remove option board from motherboard,
so set default vbt has option-DP setting and only return it.
BUG=b:231769131
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I440143dabcf04c103f2a4420a7e4afb8ec12ec1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
New device id 0x51f1 is added.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I695309d529a117bad68fc89a7f136e69cecb95d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
CPUID_RAPTORLAKE_P_J0 is ES. Add it to generate is_es = 1 in ACPI
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib8d57f7fb0b3d15bc4bcdeae47bfbdde17e13118
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add Raptor Lake specific CPU, System Agent, PCH, IGD device IDs.
References:
RaptorLake External Design Specification Volume 1 (640555)
600/700 Series PCH External Design Specification Volume 1 (626817)
Change-Id: I39e655dec2314a672ea63ba90d8bb3fc53bf77ba
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63750
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
|
|
Based on the public datasheet of NCT6686 which should be similar to
NCT6687D.
TEST=Enable serial for debugging on MSI PRO Z690-A WIFI DDR4 and see
coreboot console on the debug port
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I0e8744b5958af196de3de63de31852029d81436e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Starting with Meteor Lake SoC, the PCR/DMI interface to program GPMR
is replaced with IOC (I/O Cache), hence, this patch implements IOC
driver to support that migration.
Reference: 643504 MTL FAS section 7.5.2
TEST=Build and boot to OS for TGL RVP and MTL PSS
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I768027c2ca78310c03845f70f17df19dc8cd0982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63198
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The MP_IRQ flags can be used in the MP table and the ACPI MADT table.
Move them into acpi.h to avoid pulling in the full mpspec.h which is
only available on x86.
BUG=b:218874489, b:160595155
TEST=Build
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4f1091b7629a6446fa399720b0270556a926401a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63845
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The fast SPI controller (usually handling the boot NOR flash) is a
different controller type than the generic SPI controllers as it
provides access to the boot flash and usually is not used for generic
SPI slave connections.
Though there is common code for the fast SPI controller it currently do
not uses the PCI driver structure. This patch adds the PCI driver
envelope to the fast SPI driver and moves Apollo Lake as the first
platform to this driver.
Change-Id: I31bf39ec1c622db887dec9ca8623a7f282402849
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add Platform Secure Boot (PSB) enablement via the PSP if it is not
already enabled. Upon receiving psb command, PSP will program PSB fuses
as long as BIOS signing key token is valid.
Refer AMD PSB user guide doc# 56654, Revision# 1.00, this document is
only available with NDA customers.
Change-Id: I30aac29a22a5800d5995a78c50fdecd660a3d4eb
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use the existing definitions from FspUsb.h instead of magic values for
the ComboPhyStaticConfig settings in the mainboard's devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2707d017909b7516e5d8711c8f4e2914165ed10d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The postcar frame can now be a local variable to that function.
Change-Id: I873298970fff76b9ee1cae7da156613eb557ffbc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Some functions are only called locally.
Change-Id: I96a4e40a225536f62abb2a15c55d333b8604e8cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This removes some of the postcar setup boilerplate.
Change-Id: I4f8f92b88ac16dd70ff4878dfc14e676386d4703
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This reduces boilerplate postcar frame setup.
Change-Id: I8e258113c90ee49864ceddf36ea296ba6f83afe4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Setting up postcar MTRRs is done when invd is already called so there
is no reason to do this in assembly anymore.
This also drops the custom code for Quark to set up MTRRs.
TESTED on foxconn/g41m and hermes/prodrive that MTRR are properly set
in postcar & ramstage.
Change-Id: I5ec10e84118197a04de0a5194336ef8bb049bba4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54299
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The commentary was wrong, write_protect_state() is only called
in ramstage at the moment, and only if MRC_SETTINGS_PROTECT is
selected.
Implementation of get_gpio() eventually does the MMIO read, so
BOARD_GOOGLE_CYAN was not a special case.
Change-Id: I96ca871110bcf2fc1485bd042ed137d51b822a20
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I5d4ac11d0c9501dd3a753f8f29581552c484ff59
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ic1f33ce883443da1c68627e4c1db10871deecd0d
Signed-off-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64364
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If9ae375629c8af3d32b4c5493b5d63203e8847aa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
GNVS is more fragile as you need to keep struct elements in sync with
ASL code.
Change-Id: I2cd5e6b56e4a0dbbb11f4a0ac97e8f84d53b90ec
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic59cccdf0fb88fc71a440170ee40b73dd8736a33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The "No memory dimm at address" line in get_spd_sn and get_spd fucntion
have different format of SPD address.
get_spd_sn shows a 8-bit address format but get_spd shows a 7-bit
address format when there is no DIMM connected. It can be confusing
when debugging.
Change-Id: I46a006f4024b12d27ae0a933b7c40515034d5d64
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
There were 3 different functions in gpio.c file which used to
get gpio group and pin information separately through function
calls.
Since these are static function, we can modify argument to
pass group and pin information from parent/calling function.
This will reduce redundant work of getting information 3 times
separately.
BUG=None
BRANCH=None
TEST=code compiles and correct information is passed to functions.
Check by using pin information on Brya.
Change-Id: Ie92be8c22838ebc5e831be58545e2023eecfff24
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Nivviks uses CNVi WLAN, so disable the PCIe-related GPIOs.
BUG=b:218929856
TEST=Boot to OS on nivviks and check that WLAN still works.
Change-Id: I68f12490b0f09658e1307828b0e4488504f50e61
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable either eMMC, NVMe or UFS based on fw_config. NVMe and UFS are
only supported on nirwen, an additional nissa variant based on nivviks
and sharing the nivviks coreboot target.
BUG=b:218929856
TEST=Boot to OS on nivviks to check that eMMC still works. NVMe and UFS
will be tested once nirwen boards are available.
Change-Id: Ibdb122ef35920c962d7bd9f3f238a5d548112282
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Nirwen is an additional nissa reference board which is almost identical
to nivviks, so is reusing the nivviks coreboot variant. However, there
are two GPIO changes, so update the GPIO tables to handle these based on
board_id.
nivviks:
GPP_D6 -> WWAN_EN
GPP_E13 -> NC
nirwen:
GPP_D6 -> SSD_CLKREQ_ODL
GPP_E13 -> WWAN_EN
BUG=b:218929856
TEST=Boot to OS on nivviks
Change-Id: I494ed127714069a8f36d16d11ca4e8a1f3d37827
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:218929856
TEST=Boot to OS on nivviks. Set fw_config in CBI and check that pen
garage is enabled/disabled as expected.
Change-Id: I2c3f5403e0f11443ad3647b8c4ae624f0b88a111
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:218929856
TEST=Boot to OS on nivviks. Change fw_config in CBI and check that WFC
is enabled/disabled as expected.
Change-Id: Iac4bb358d904579376e0810f8c2644b3bde4f1e6
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch sets the RComp resistor values to default values needed.
BUG=b:231202733
TEST=Build and boot nivviks and nereid. Verify the Rcomp values are set
to default values from debug FSP log.
[SPEW ] Updating Rcomp Targets:
[SPEW ] RcompTarget[RdOdt]: 48
[SPEW ] RcompTarget[WrDS]: 30
[SPEW ] RcompTarget[WrDSCmd]: 20
[SPEW ] RcompTarget[WrDSCtl]: 20
[SPEW ] RcompTarget[WrDSClk]: 20
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I2c7a54c49e282446ece77ca406951782282a009a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Enable DRIVERS_GENESYSLOGIC_GL9750 support for Crota.
BUG=b:231686917
TEST=USE="project_crota emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ie10167e48256a61801b2623ae4500db5e67e73cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
If a payload did any NULL dereferencing it would be broken and jump
back to coreboot code. This fixes the SeaBIOS, FILO and possibly other
payloads too.
Fixes: 3f01cd14533f ("arch/x86: Add support for catching null
dereferences through debug regs")
TESTED on qemu/i440fx.
Change-Id: I80f69b71f4d0fab3126e4b9f8c8dc7737b372174
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64345
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Stefan Ott <coreboot@desire.ch>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since coreboot locks GPIO registers after GPIO configuration, OS is not
able to program GPE_EN register to program wake events. This causes
the issue of event not getting logged into event log (since GPE_EN bit
is not set).
GPE_EN register programming is required for the GPIO pins which are
capable of generating SCI for the system wake. Elog mechanism relies
on GPE_EN and GPE_STS bit to log correct wake signal.
This patch add supports to program GPE_EN register before coreboot locks
the GPIO registers. Note that coreboot will only program GPE_EN bits for
GPIO capable of generating SCI.
This will help resolve issue where we don't see wake event GPIO in event
log.
BUG=b:222375516
BRANCH=firmware-brya-14505.B
TEST=Compile code for Brya and see GPE_EN bits set from the kernel console
Change-Id: I27e525f50c374c2cc9675e77eaa7774683a6e7c2
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
coreboot needs to set GPE_EN bit for the GPIOs which are wake capable
from s0ix/sleep. Due to GPIO locking mechanism, coreboot/OS will not
be able to write GPE_EN register post GPIO has been locked.
This patch adds support in SoC code to provide correct offset for
GPE_EN and GPE_STS registers to the common code.
Plan is to use this offsets to set GPE_EN bits before GPIO locking
in coreboot which will be part of subsequent CL.
BUG=b:222375516
BRANCH=firmware-brya-14505.B
TEST=Check if code compiles for Brya and correct offset values are printed.
Change-Id: I6b813b30b8b360f8eccbf539b57387310e380560
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change ELAN touchscreen i2c address to 0x16 and change HID to ELAN900C
BUG=b:231684121
TEST=local build and tested with ELAN touch screen
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: Ide005a0681e236c3102090c1c36ab81926849000
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:218929856
TEST=Boot to OS on nivviks. Change fw_config in CBI and check that SD
card is enabled/disabled as expected.
Change-Id: Idcf38343bb290b1eff6a2e440f868b03acba3288
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Ti50 firmware versions below 0.0.15 don't support the firmware_version
register and trying to access it causes I2C errors. Some nissa boards
are still using Ti50 0.0.12, so add a workaround Kconfig to skip reading
the firmware version and select it for nissa. The firmware version is
only read to print it to the console, so it's fine to skip this. This
workaround will be removed once all ODM stocks are updated to 0.0.15 or
higher.
A similar workaround Kconfig was added in CB:63011 then removed in
CB:63158 which added support for separate handling of Cr50 and Ti50.
But we actually still need this workaround until all Ti50 stocks are
upgraded to 0.0.15 or higher.
BUG=b:224650720
TEST=Boot to OS on nereid with Ti50 0.0.14
Change-Id: Ia30d44ac231c42eba3ffb1cb1e6d83bb6593f926
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
With GPIO_DRIVER_LOCK kernel driver can't change to IRQ. Thus, we need
to set it as INT in coreboot to make the IRQ work.
BUG=b:223476974
TEST=evtest work as expected.
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100
Input device name: "PRP0001:00"
Supported events:
Event type 0 (EV_SYN)
Event type 5 (EV_SW)
Event code 15 (SW_PEN_INSERTED) state 0
Properties:
Testing ... (interrupt to exit)
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1
Event: -------------- SYN_REPORT ------------
Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I5f9fdfb2622b4b955da216119e74c6f7d5795d36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
By using mp_run_on_all_cpus_synchronously to run APs MTRR init, it
gurantees the BSP will run post_cpus_add_romcache until all APs finishes
_x86_setup_mtrrs task.
BUG=b:225766934
TEST=Test on redrix and found the MTRR race condition on AP/BSP is gone.
Change-Id: I1fd889f880a0c605e6c739423a434d2adbc12d26
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
MTRR is a core level register which means 2 threads in one core share
same MTRR. There is a race condition could happen that AP overrides
BSP MTRR unintentionally.
In order to prevent such race condition between BSP and APs, this
patch provides a function to let BSP assign tasks to all APs and wait
them to complete the assigned tasks.
BUG=b:225766934
Change-Id: I8d1d49bca410c821a3ad0347548afc42eb860594
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63566
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com>
Change-Id: Ib795f25abe5bbd95555b68af39c637d7c93aa819
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64251
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change matches what we already do for cezanne. It will allow the
GPIO controller to work correctly in windows.
BUG=b:175146875
TEST=Boot windows and verify GPIO controller binds correctly and touch
screen works. Also boot linux and verify touchpad still works.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I998e286de18d3e3f8b2fe610d17aef94a6cf5477
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Specify the USB PHY settings in the devicetree instead of relying on the
FSP defaults. The USB PHY configuration for Chausie are taken from the
internal UEFI code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8cc38e6e26d53802773fe3c405415de15cca98a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
With this patch, the ThinkLight on the ThinkPad T60 can be controlled
through the OS. This was initially done for the X201 in f63fbdb6:
mb/lenovo/x201: Add support for ThinkLight.
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Change-Id: I47f878533d36857d002d2e2605cc8bc7e1d960c9
Signed-off-by: Stefan Ott <stefan@ott.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Demote log level from error to notice. People should aware the SPD
decode might be wrong if it's not the support type.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I55f0968b78baaa2fc9a6bbebf6712fb8bfd349f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Also, code reformatting to reduce coding style difference.
Change-Id: I488050a6ab852520734b16032af9a683a3ad1a46
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: I1375b1d18113000b31266030fd7115e23d7cce5f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: Iea9630ce7e5bfcc9d1c8699a81bd1c61a0705de8
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Regarding Annex K: Serial Presence Detect (SPD) for DDR3 SDRAM Modules
DDR3 - Document Release 6 (JEDEC Standard No. 21-C Page 4.1.2.11 – 69)
memory buffer personality bytes is located at bytes 102 ~ 116.
Change-Id: I7d225fb5e80b537b4c0ce1c23b7a4524e9109a7b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/pae.h>' -- src/) <(git grep -l 'memset_pae\|MEMSET_PAE_\|MAPPING_ERROR\|map_2M_page\|paging_identity_map_addr\|paging_enable_for_car\|paging_set_default_pat\|paging_set_pat\|PAT_ENCODE\|PAT_UC_MINUS\|PAT_WB\|PAT_WP\|PAT_WT\|PAT_WC\|PAT_UC\|paging_set_nxe\|paging_disable_pae\|paging_enable_pae\|paging_enable_pae_cr3' -- src/)
Change-Id: I4cab4b66c3d123dbb8a948a5596aa4975b31139b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/pae.h>' -- src/) <(git grep -l 'memset_pae\|MEMSET_PAE_\|MAPPING_ERROR\|map_2M_page\|paging_identity_map_addr\|paging_enable_for_car\|paging_set_default_pat\|paging_set_pat\|PAT_ENCODE\|PAT_UC_MINUS\|PAT_WB\|PAT_WP\|PAT_WT\|PAT_WC\|PAT_UC\|paging_set_nxe\|paging_disable_pae\|paging_enable_pae\|paging_enable_pae_cr3' -- src/)
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: If0f69fa8fe4a336b4e4d2a148d1e7a911af3c2c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Found using:
diff <(git grep -l '#include <cf9_reset.h>' -- src/) <(git grep -l 'RST_CNT\|FULL_RST\|RST_CPU\|SYS_RST\|do_system_reset\|do_full_reset\|cf9_reset_prepare\|system_reset\|full_reset' -- src/) |grep "<"
Change-Id: I093d8412e14ce81b462fb9a7ccb3a2a93ae760a6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60803
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Id4550842a31f89e7eb6c1543512794eeb5e24937
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: I25d112941db8214a7e450de5fb512ef8c2c5f5e2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61006
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: I322a94186b92033fc27ba97785b55df09aa317f7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ie1d2965b384e5653958f7f8503c62b8a16fa7bc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Change-Id: I8d55fc93f6ec413d0cbcea2f8e0a90a76f1803cd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Clang does not like array declarations inside plain switch cases. There
are 2 options to fix this: use a block inside the switch statement, or
declare it outside the switch statement. This does the latter.
Change-Id: I9a02136fd63ac171b2bec4647c30c7eece930246
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The bootblock is loaded from IFWI so there is no need to have it in
cbfs.
Also remove the FIT handling as that is also handled by the IFWI.
TESTED: up/squared still boots
Change-Id: I8e70e080765dd7306074a8cf71c8795b8fbbb8a2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63225
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2b02bcecda2257f191c0d0fc9935b1eb673ab3d2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Floats are not allowed in coreboot.
As the compiler rounded down the value, do so in the code too as this
is a known good value.
Change-Id: I4e180d4cb8e0e1aa68186bfc1daffdc5c339dc64
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
CID 1488814: Uninitialized variables (UNINIT)
Commit c66ea98 introduced an issue after static analysis on merge.
Because every APIC is associated with a CPU, this did not result in
any issues at runtime but should be fixed/cleaned up. Now, the path
name is initialized to null.
Fixes: Coverity CID 1488814, commit c66ea98
TEST=Built on brya
Change-Id: I0cfc8fd7a0c39e6610a9361630e3755293084f3d
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Init basic override devicetree based on schematics
BUG=b:224423318
TEST=FW_NAME="osiris" emerge-brya coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ie69957b39b5c299846c64f67fb29207cf858e50e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64199
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update initial gpio configuration for osiris
BUG=b:224423318
TEST=FW_NAME=osiris emerge-brya coreboot
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I014bd7ebf94bf687362f7ee734cadfa83f3bde2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Change-Id: If765f492befd9d08b5fe9e98c887bcf24ce1a7db
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I3c8c1787c77ed08942c6550ca556875904be2fa2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64242
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2acad0763d19b50c02472dfdd33084acbafe4c84
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Commit f89cb241eec introduced a regression where the RcompTarget was
not updated according to the SPD.
Change-Id: I07715224b11937604b107e370d957745b245ddd9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64239
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ifc0374ed49ecefc57dec8e72e73bac031838a9f5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64238
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2f89d11c163f56163d5c361a3edad14418bf9fa7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I1cf656b404b0e880c061b273ef259ca40a6d499a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This fixes building with clang.
Change-Id: I7405f031298a35589e435e888af911d916662d23
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63069
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang does not like static asserts on integral constant expressions.
Change-Id: If5890a357ed95153d8ae2efa727c111b05bc6455
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This fixes building with clang.
Change-Id: Ida464d9ff96af3ff485682fbbf904bb2253ec44f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
-fsanitize=kernel-address is not implemented in clang
Change-Id: Ib8660bf99b940ff9eac7461f5946df0891dd3a4f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch does the following:
- Allow selecting 64bit from Kconfig
- Fix up integer to pointer conversion that gcc complains about
- Add a buildtest target in configs
Tested on Thinkpad X200: boots fine to the payload
Change-Id: Icb9c31a28ee231b87109b19c00ce2f8b48b5aefe
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This was dead code as it was checking for the wrong bit (bit 11
indicates the use of shadow GTT). It was doing it at the wrong place
regardless as no BARs are set up.
Move the code clearing GTT into the GMA .init code and do it
unconditionally: if the GTT does not match 2M then the cycles are
simply not decoded.
Tested on thinkpad X200.
Change-Id: Iac3264d484e66e9ca4b3cd3df90ad87a476e31ce
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Linux complained that the numbers in DSDT (256) don't match with the
values in MMCONF (64).
Change-Id: I2ccac64934e8d284e68945f86ec46cb2bf896277
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Linux needs to know that allocating BARs above 4G is fine so reserve a
region in ACPI for that.
Tested on thinkpad X200: a PCIe window gets allocated above 4G and
Linux does not relocate it.
Change-Id: I62a8a656481eba01add3d7d06b42e3352206df1b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Enable MKBP (Matrix Keyboard Protocol) interface for all skyrim family
to use for buttons and switches. Disable TBMC (Tablet Mode Switch
device), as it is not needed anymore.
BUG=b:230682161
TEST=manual test on Skyrim:
Volume Up/Down and Power buttons, Tablet Mode switch
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I79ee2fdbb325491c9e3df5b9cff0c0c1181a7001
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Implement sub-function 1 (Get Device Constraints)
of the Low Power S0 Idle Device-Specific Method (_DSM).
This provides a way in which to describe various devices required
D-states to enter LPM (S0ix). The information can be used to help
in diagnostics and understanding of S0ix entry failure.
Values were derived from Intel document 595644 (rev 0.45) and
the ADL FSP sample ASL.
This implementation adds support for ADL. Other SoC's could be
ported to be included as well. If they aren't, they will default
to the existing behavior of a single hardcoded device to ensure
compatibility with Windows.
TEST=Built and tested on brya by verifying SSDT contents
Change-Id: Ibe46a0583c522a8adf0a015cd3a698f694482437
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lance Zhao
|
|
This board never made it to production, and development on it has long
since stopped; it is a maintenance burden, therefore drop it from the
tree.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ieb12a95ff56c3437cb88df8ef3f6ae115ad53446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
mcfg->usb_phy is a pointer to a struct usb_phy_config. The config is
constant. Changing a constant is undefined behavior, so create a local
static instance of usb_phy_config that can be modified safely.
Change-Id: Iedbc49109dcd1da9198fcb2a8f84e2b567cd8f86
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64130
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This file started as a copy from Cezanne. Sabrina has less USB ports
than Cezanne. Also the struct definition of fch_usb2_phy has changed and
FSP_USB_STRUCT_MINOR_VERSION is also updated.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1ef2b62373b178d729b3230d0d8539986cc631ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add and use defines instead of magic values in fsp_m_params.c. The
values will be updated to match the Sabrina FSP in a follow-up commit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I91da9e9d2b95e169dd73153766f24cf8afbfa4ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64128
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use sizeof instead of having a hard-coded struct length.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c39d770a7719e30572e71b6a6c24fa2ad4a9426
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Replace TPM_GOOGLE_CR50 with TPM_GOOGLE_TI50.
BUG=b:232066387
TEST=emerge-corsola coreboot
BRANCH=none
Change-Id: I0cc787b3104bc47f6f856497bbc0870e0519dc28
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64252
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Fibcom FM101-GL USB WWAN configuration with the required power
sequence as suggested in Fibocom FM101-GL Hardware Guide V1.0.
BUG=b:227761300
TEST=Build and boot to OS in Skyrim. Ensure that the WWAN module is
enumerated in the output of lsusb.
localhost ~ # lsusb
Bus 004 Device 003: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I39f8e7204e31d9a4d093aacd838a18e6d2f44970
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64004
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In Skyrim, USB-A port and WWAN modules are connected to the SoC USB
ports through an external hub. Update the USB configuration in the
devicetree accordingly. Enable the ACPI driver for external USB hub.
BUG=b:227761300
TEST=Build and boot to OS in Skyrim. Ensure that the hub and USB-A ports
are enumerated correctly in the output of lusub command.
Change-Id: Ibf6a3da8add7361fc50adcf7c62e46df234685dc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63586
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add chip driver for soldered down external USB hub. This driver adds
ACPI objects for the hub and any downstream facing ports.
BUG=b:227761300
TEST=Build and boot to OS in Skyrim. Ensure that the hub and any
configured ports have ACPI devices defined in SSDT.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I11d7ccc42d3dce8e136eb771f120825980e5c027
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63968
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We found HDMI-DDIA didn't get hot plug detection,so set GPP_E14
as the default value to let HDMI-DDIA get hot plug detection.
BUG=b:231769129
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I1b5cc1465fec519be4bbe5e027be0dc25815f4fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64138
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add related settings for synaptics touchpad.
BUG=b:229938024
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I3b3bb5cec56901dadaaa1c5699781df45c237257
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
For multiple sockets platform 16 may not be enough, so increase
it to 32.
Tested=On a platform that has more than 16 memory DIMM,
SMBIOS type 17 can show all DIMM tables.
Change-Id: If72a8622ac1e7e67646aa4dd24b99637fb8b1297
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: lichenchen.carl <lichenchen.carl@bytedance.com>
|
|
Enable the max charge feature for cml, as the EC supports it since
Star Labs EC firmware 1.06.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I779a686960b63025fb5f40e826ed117f402a0b2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64093
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
