| Age | Commit message (Collapse) | Author |
|---|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by volteer and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: K4U6E3S4AA-MGCL
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
Part: K4UBE3D4AA-MGCL
Byte# Current New Explanation
6 0xB5 0xB4 Signal loading is not used by
MRC. Set bits 1:0 to 00.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
Part: H9HCNNNBKMMLXR-NEE
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. tckMin is
calculated as (1/4267)*2 which comes
out to be 0.46871. Some datasheets
round this down to 0.468 and others
round it up to 0.469. JEDEC spec uses
0.468. As per that, this value comes
out to be 0xE0.
Part: H9HCNNNFAMMLXR-NEE
Byte# Current New Explanation
4 0x15 0x16 As per datasheet, density is 16Gb per
logical channel. So value should be 0x16.
6 0xF9 0xB8 This device has 4 logical dies
instead of 8. Also, signal loading is
not used by MRC.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
20,21, 0x92,0x55, 0x12,0x29, As per datasheet, part supports CAS
22 0x00 0x15 latencies 6,10,16,22,26,32,36,40. So value
should be 0x12,0x29,0x15.
24 0x8C 0x96 taa is .468ns * CAS-40 which results
in byte 24 being 0x96 as per datasheet.
29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to
280ns in MTB units which is 0x08C0.
31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to
140ns in MTB units which is 0x04C0.
123 0x00 0xE2 Fine offset for taa. Expected value
is 0xE2 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. tckMin is
calculated as (1/4267)*2 which comes
out to be 0.46871. Some datasheets
round this down to 0.468 and others
round it up to 0.469. JEDEC spec uses
0.468. As per that, this value comes
out to be 0xE0.
Part: MT53E1G32D2NP-046 WT:A
Byte# Current New Explanation
4 0x15 0x16 As per datasheet, density is 16Gb per
logical channel. So value should be 0x16.
5 0x21 0x29 As per datasheet, this part has 17row
address bits and 10column address
bits. This results in 0x29.
6 0xB5 0x94 This device has 2 logical dies. Also,
MRC does not use signal loading.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
12 0x0A 0x02 As per datasheet, this is 1rank and
16-bit wide channel. So, value should
be 0x02.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
29,30 0xC0,0x08 0xE0,0x0B As per datasheet, this corresponds to
380ns in MTB units which is 0x0BE0.
31,32 0x60,0x04 0xF0,0x05 As per datasheet, this corresponds to
190ns in MTB units which is 0x05F0.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:147321551,b:155423877
Change-Id: I3998b2cd91020130bacf371fce9b0d307304acbe
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by halvor and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: H9HKNNNCRMBVAR-NEH
Byte# Current New Explanation
4 0x16 0x15 As per datasheet, density is 8Gb per
logical channel. So value should be 0x15.
6 0xB9 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00. 2 channels 2
dies. Hence, 0x94
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to
280ns in MTB units which is 0x08C0.
31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to
140ns in MTB units which is 0x0460.
125 0xE1 0xE0 Fine offset for tckMin. tckMin is
calculated as (1/4267)*2 which comes
out to be 0.46871. Some datasheets
round this down to 0.468 and others
round it up to 0.469. JEDEC spec uses
0.468. As per that, this value comes
out to be 0xE0.
Part: MT53E1G64D4SQ-046 WT:A
Byte# Current New Explanation
5 0x21 0x29 As per datasheet, this part has 17row
address bits and 10column address
bits. This results in 0x29.
6 0xB9 0x94 Signal loading is not used by
MRC. Set bits 1:0 to 00. 2 channels,
2 dies. Hence, 0x94.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:147321551,b:155423877
Change-Id: I28b065a00380516d8686279a92ef68b9f17e2f65
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41616
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by malefor and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: K4U6E3S4AA-MGCL
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Bits 1:0 set to 0.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:155239397,b:147321551
Change-Id: I8b8bdc55314f538aff4dd1944a0b745357744d8c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41615
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gen_part_id.go
This change adds mem_list_variant.txt that contains the list of
memory parts used by ripto and Makefile.inc generated by
gen_part_id.go using mem_list_variant.txt.
In the final change of the series, all volteer variants will be
switched from using the current SPDs to new auto-generated SPDs.
Differences in auto-generated SPD from current SPD are as follows:
Part: K4U6E3S4AA-MGCL
Byte# Current New Explanation
6 0x95 0x94 Signal loading is not used by
MRC. Bits 1:0 set to 0.
16 0x48 0x00 Signal loading is not used by
MRC. Set to 0x00.
19 0x0F 0xFF As per JEDEC spec, tckMax should be
100ns. So, value should be 0xff as
per datasheet.
21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS
latencies 20,24,28,32,36. So value
should be 0x54, 0x05.
24 0x8C 0x87 taa is .468ns * CAS-36 which results
in byte 24 being 0x87 as per datasheet.
123 0x00 0xE5 Fine offset for taa. Expected value
is 0xE5 as per datasheet.
124 0x7F 0x00 Fine offset for tckMax. Expected
value is 0x00 as per datasheet.
125 0xE1 0xE0 Fine offset for tckMin. As per
datasheet tckMin is 0.468ns. So, this
comes out to be 0xE0.
BUG=b:155239397,b:147321551
Change-Id: Ibb06443a5c7fd80915f66b806cdd7c3ae1275b05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41614
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to
generate SPD files for currently known LP4x memory parts that
can be used with JSL-based mainboards.
Following files are added:
1. spd-*.hex: SPD files auto-generated by gen_spd.go
2. spd_manifest.generated.txt: Manifest file auto-generated by
gen_spd.go
Mainboards can use the SPD files from SoC directly when creating
SPD binary to add to CBFS.
Change-Id: Ic52506b809c66b9f7cf25a100a959d85c67addf2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41876
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to
generate SPD files for currently known LP4x memory parts that can be
used with TGL-based mainboards.
Following files are added:
1. spd-*.hex: SPD files auto-generated by gen_spd.go
2. spd_manifest.generated.txt: Manifest file auto-generated by
gen_spd.go
Mainboards can use the SPD files from SoC directly when creating SPD
binary to add to CBFS.
BUG=b:147321551,b:155239397
Change-Id: Ic3935e4f6d106cbdf496fdfa28a0991e2d238fd9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Remove unused includes
Change-Id: I7e8109870168db7f477f205a0b3020b7b2be5f5f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41541
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Advertising SMI triggers in FADT is only valid if we exit with
SMI installed. There has been some experiments to delay SMM
installation to OS, yet there are new platforms that allow some
configuration access only to be done inside SMM.
Splitting static HAVE_SMI_HANDLER variable helps to manage cases
where SMM might be both installed and cleared prior to entering
payload.
Change-Id: Iad92c4a180524e15199633693446a087787ad3a2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When no SMI is installed, FADT should not advertise a trigger
mechanism that does not respond.
Change-Id: Ifb4f99c11a72e75ec20b9faaf62aed5546de91fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41909
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If running on older (like before 2.4.0) version of QEMU there is
no SMI support, so never advertise SMI in FADT for the emulation.
Behaviour if ACPI daemon tries to raise SMI under these conditions
is unknown.
Change-Id: I170058793798648c6713de1530d89ec2ac53e39a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When no SMI is installed, FADT should not advertise a trigger
mechanism that does not respond.
Change-Id: Ia61e50fb49719e9e18e81a27f355cdbd755a3f40
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41906
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When no SMI is installed, FADT should not advertise a trigger
mechanism that does not respond.
Change-Id: Iefa1e7d80367dbe380f69e768238b4124a45626f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41905
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds support for the Prodrive Hermes mainboard.
Tested with CoffeeLakeFspBinPkg FSP 7.0.68.41.
Untested:
* CNVi
* Intel Graphics
Tested:
* CPU Intel Xeon E2288G
* CPU Intel Core i3-9100F
* CPU Intel Core i7 9700KF
* CPU Intel Core i7 9700E
* CPU Intel Core i7 9700F
* CPU Intel Core i5 9600K
* CPU Intel Pentium Gold G5400
* PCIe Link Width x8 on Slot6 by changing PCIe mux
* All four DDR4 slots in different configurations
* USB2.0 HDR1
* USB2.0 HDR2
* USB3.0 HDR
* Slot1
* Slot2
* Slot3
* Slot4
* Slot6
* M2.M NVMEe
* Ethernet PHYs 0-4
* Aspeed BMC PCIe
* Aspeed BMC USB
* Aspeed Graphics init
* USB3 backplane all working
* I801 SMBUS
Not Working:
* Intel HDA
Change-Id: Id7d051d3fa6823618691d5572087c9ae589c2862
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Set up cpus:
* setup apic IDs.
* setup MSR to enable fast string, speed step, etc.
* Enable turbo
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I5765e98151f6ceebaabccc06db63d5911caf7ce8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
We decided to store the FSG on eMMC instead of SPI flash, so we don't
need this region anymore. Getting rid of it allows us to put more space
into CBFS (to store hi-res bitmaps). Also grow VPD by some remaining
amount to keep the FMAP alignment reasonable.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If73450b65718affae71b6ada70ded5c5f45cfb4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41980
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philip Chen <philipchen@google.com>
|
|
The existing define for SPI_FIFO_DEPTH looked a bit suspicious, but
turned out to be correct.
Change-Id: I91e65d922673f5c451a336ae013cb75f87a3fc98
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function set_mmio_dev_ops() in chip.c which
is used for setting the dev->ops for MMIO devices based on the
comparison of MMIO address in device tree to the pre-defined base
addresses in iomap.h.
Call to i2c_acpi_name() is replaced with set_mmio_dev_ops and scope of
i2c_acpi_name is restricted to i2c.c since it is not required to be
exposed out of that file.
Change-Id: I31f96cfe8267b0df37012baeb7cfcaec9c2280f6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Drop functions that are not being used.
Change-Id: If406601f3bb7a98a621c1339b2f3413a43b8cc9f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit fddd101904188193197be10c8eae04e76386299b.
Reason for revert: With FSP compression and non serial FSP we now have enough space in RO.
Original change's description:
> mb/google/zork: Increase RO section to 5MB
>
> The current size is too small to fit all the depthcharge assets.
> Increasing it to 5MB gives us 648k of free space.
>
> $ cbfstool /build/zork/firmware/image-trembyle.serial.bin print -r COREBOOT
> FMAP REGION: COREBOOT
> Name Offset Type Size Comp
> cbfs master header 0x0 cbfs header 32 none
> fallback/romstage 0x80 stage 524316 none
> fallback/ramstage 0x80100 stage 96592 none
> config 0x97ac0 raw 843 none
> revision 0x97e80 raw 680 none
> spd.bin 0x98180 spd 8192 none
> etc/sdcard0 0x9a1c0 raw 8 none
> locales 0x9a200 raw 141 LZMA (166 decompressed)
> (empty) 0x9a300 null 3224 none
> fspm.bin 0x9afc0 fsp 720896 none
> (empty) 0x14b000 null 3992 none
> fsps.bin 0x14bfc0 fsp 327680 none
> pci1002,15d8,c1.rom 0x19c000 optionrom 54272 none
> pci1002,15d8,c4.rom 0x1a9480 optionrom 54272 none
> fallback/dsdt.aml 0x1b6900 raw 12727 none
> locale_hi.bin 0x1b9b00 raw 10441 LZMA (239928 decompressed)
> ...
> locale_ko.bin 0x254f80 raw 11282 LZMA (231168 decompressed)
> fallback/payload 0x257c00 simple elf 95169 none
> (empty) 0x26f000 null 245656 none
> apu/amdfw 0x2aafc0 raw 1277440 none
> (empty) 0x3e2e00 null 688472 none
> bootblock 0x48af80 bootblock 64 none
>
> BUG=b:130028876
> BRANCH=none
> TEST=Built image with depthcharge and booted.
>
> Change-Id: I9cd2902404ef68cdbd4a9484d5cb1ee9cba3efd1
> Signed-off-by: Raul E Rangel <rrangel@chromium.org>
> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2042850
> Reviewed-by: Martin Roth <martinroth@google.com>
BUG=b:130028876, b:150746858
BRANCH=none
TEST=emerge-zork coreboot-zork chromeos-bootimage and boot trembyle
localhost ~ # flashrom -p host -r /tmp/main.bin
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
Calibrating delay loop... OK.
coreboot table found at 0xcbe54000.
Reading flash... SUCCESS
localhost ~ # futility dump_fmap /tmp/main.bin | grep WP_RO -B 3
area: 22
area_offset: 0x00c00000
area_size: 0x00400000 (4194304)
area_name: WP_RO
localhost ~ # flashrom -p host --wp-range 0xc00000 0x400000 --wp-enable
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
coreboot table found at 0xcbe54000.
SUCCESS
localhost ~ # flashrom -p host --wp-status
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64)
coreboot table found at 0xcbe54000.
WP: status: 0x0094
WP: status.srp0: 1
WP: status.srp1: 0
WP: write protect is enabled.
WP: write protect range: start=0x00c00000, len=0x00400000
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5df10ee8e855adfaaf4b2fac4c2c47037ec093b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This driver generates an ACPI device object for a UART attached device
with all of the expected device support handlers like different interrupt
sources and power control GPIOs.
Example use:
chip drivers/uart/acpi
register "name" = ""UDEV""
register "desc" = ""UART Attached Device""
register "hid" = "ACPI_DT_NAMESPACE_HID"
register "compat_string" = ""google,cros-ec-uart""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW_WAKE(GPP_C20)"
register "uart" = "ACPI_UART_RAW_DEVICE(115200, 64)"
device generic 0 on end
end
Resulting in this ACPI device:
Device (UDEV)
{
Name (_HID, "PRP0001")
Name (_UID, Zero)
Name (_DDN, "UART Attached Device")
Method (_STA, 0, NotSerialized)
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate ()
{
UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne,
0x00, LittleEndian, ParityTypeNone, FlowControlNone,
0x0040, 0x0040, "\\_SB.PCI0.UAR2",
0x00, ResourceConsumer, , Exclusive)
GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer)
{
0x0114
}
})
Name (_DSD, Package (0x02)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package (0x01)
{
Package (0x02)
{
"compatible",
"google,cros-ec-uart"
}
}
})
}
Change-Id: Idfd2d9d2ab6990a82ddd401734c0d9b1b0b8f82d
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This change adds support for generating the device descriptor that
corresponds to the UARTSerialBusV2() ACPI macro.
The resulting ACPI code for ACPI_UART_RAW_DEVICE(115200, 64) is:
UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne,
0x00, LittleEndian, ParityTypeNone, FlowControlNone,
0x0040, 0x0040, "\\_SB.PCI0.UAR2",
0x00, ResourceConsumer, , Exclusive)
Change-Id: I671ce2a499d74717d8677528c46ab3fbc1d7faf5
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41792
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There have been changes to the way device properties are supported
in Linux[1] and Windows[2] which add flexibilty:
- non-standard UUIDs can be used instead of only ACPI_DP_UUID
- support for multiple different packages within the _DSD that
associate different properties with unique UUIDs.
To handle this I extracted the part that does the write of UUID and
properties to a separate function and defined a new PACKAGE type
which has the custom UUID as a name and can be used the same way that
child properties are today.
For example a PCIe root port for a USB4 port has a standard property
indicating the USB4 reference, and then two custom properties which
are defined for different attributes.
Example code:
/* Create property table */
acpi_dp *dsd = acpi_dp_new_table("_DSD");
acpi_dp_add_reference(dsd, "usb4-port", usb4_path);
/* Add package for hotplug */
acpi_dp *pkg = acpi_dp_new_table("6211e2c0-58a3-4af3-90e1-927a4e0c55a4");
acpi_dp_add_integer(pkg, "HotPlugSupportInD3", 1);
acpi_dp_add_package(dsd, pkg);
/* Add package for external port info */
pkg = acpi_dp_new_table("efcc06cc-73ac-4bc3-bff0-76143807c389");
acpi_dp_add_integer(pkg, "ExternalFacingPort", 1);
acpi_dp_add_package(dsd, pkg);
/* Write all properties */
acpi_dp_write(dsd);
Resulting ACPI:
Scope (\_SB.PCI0.TRP0)
{
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
Package ()
{
Package () { "usb4-port", \_SB.PCI0.TDM0.RHUB.PRTA }
},
ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"),
Package ()
{
Package () { "HotPlugSupportInD3", One }
},
ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"),
Package ()
{
Package () { "ExternalFacingPort", One },
}
})
}
[1] https://patchwork.kernel.org/patch/10599675/
[2] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports
Change-Id: I75f47825bf4ffc5e9e92af2c45790d1b5945576e
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Create the voxel variant of the volteer reference board
BUG=b:157879197
BRANCH=None
TEST=util/abuild/abuild -p none -t google/volteer -x -a
make sure the build includes GOOGLE_VOXEL
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I8ba5412be211730db84675927c500238cb20ff3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
We previously confirmed [1] that bootblock will grow beyond current
8KiB size if console is enabled. Automatically change to 16KiB if user
enabled it in menuconfig.
[1] https://review.coreboot.org/c/coreboot/+/36775
Change-Id: Ic9988c77cf9677167a382aa4dc7dcfa2bc4cbe02
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41460
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:157499341
BRANCH=NONE
TEST=FW_NAME="vilboz" emerge-zork coreboot
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I28ab3edb130fc7bf8b786141bc088166052d4868
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41801
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If AMD_PUBKEY_FILE contains an absolute path the resulting path is
incorrect since it contains $(top).
BUG=b:147042464
TEST=Build trembyle with absolute and relative path.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib46b1799fad5588a18411f8c32541192d699cdd4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add PCIe enumeration and resource assignment/allocation.
Xeon-SP processor family has split IIO design, where PCIe domain 0 is
split into multiple stacks. Each stack has its own resource ranges (eg.
IO resource, mem32 resource, mem64 resource). The stack itself is not
PCIe device, it does not have config space to be probed/programmed.
The stack is programmed by FSP. coreboot needs to take into account of
stack when doing PCIe enumeration and resource allocation.
Current coreboot PCIe resource allocator does not support the concept of
split IIO stack, thus entire support is done locally in this patch.
In near future, improvements will be done, first generalize for xeon-sp,
then generalize for coreboot PCIe device code.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: If461b1dc1f313d98b676dc9e91d08a1dbb9cb388
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
offsets for ACPI_PM are incorrectly configured for picasso SoC.
Especially incorrect ACPI_PM_TMR_BLK makes kernel to spend 10 sec for
trying to testing it on wrong address.
Fix them to correct offset with hack for GPE0_BLK.
BUG=b:147044624
TEST=build and boot on trembyle; PM Timer error is gone
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6adf71479c30f5b6751a21edc4bfa311ddbef5ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41128
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The default HID was removed by a1c82c5ebee. We need to explicitly
specify it.
BUG=b:154756391
TEST=No longer see ERROR: _HID required message in console
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I0083f98aea55ba262ac44b0018c9c1d2e12d9f8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If the device is missing the HID, the code would previously leave an
open scope and device on the stack.
BUG=b:154756391
TEST=Verify stack ACPI stack does not exceed limit on Trembyle.
Fixes: a1c82c5ebee ("drivers/generic/max98357a: Allow custom _HID from config")
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I798ed08ef0a0575def12937a66a7ce99f743e60d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ia4508a9a087e3996ef7667280f8e2788421e5700
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I263c159fe4b7757dd5abfc0d6248e45b749df980
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These devices never show on the PCI domain.
Change-Id: I2d4d99c1e96c15dacb950aeb85b3e9a5d127c791
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Icebf0eea4e1fee6d15ba3f1a080cbc40b42fd733
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I6a066659758aeb0251d9b37f525ad987b90832db
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41787
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
hostbridge.asl
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: Ib0ffd9a332fa9590de63f8828d30daa710fe50db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This change updates hostbridge.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for google/link.
Change-Id: I5345ee22df7da92ee48c718f5bd748d7ea6155f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
hostbridge.asl
Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and
1 lock bit. If lock bit is set, then systemagent.asl would end up
reporting the base address of low MMIO incorrectly i.e. off by 1.
This change masks the lower 20 bits of TOLUD and TOM registers when
exposing it in the ACPI tables to ensure that the base address of low
MMIO region is reported correctly.
Change-Id: I1fb52a42e84130d973e0970024e263f443aa0b89
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This change updates hostbridge.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for
google/beltino.
Change-Id: I0ba2da441c7b398cc7f84a7ef7a5d233b0365cbe
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
- Update C-States max latency values
- Remove MSR programming for C-States latency
BRANCH=None
TEST=Boot to OS and check CState Latenecy
>cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency}
POLL
C1_ACPI
C2_ACPI
C3_ACPI
0
1
253
1048
Change-Id: I05c0b5b31d1883f72ca94171aa1b536621e97449
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40902
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibe9752a3f09e8944f7fbcf385b83faae95a7cd9b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I1731313798a4aadcbc17808bfe02b50bf8bd41db
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I78f091e0d3d17fcfc60cd54721b34d143cbe2d86
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
When no SMI is installed, FADT should not advertise a trigger
mechanism that does not respond.
Board does not support ACPI S4 or C-states or P-states.
Change-Id: If83efb72e076d404468259e312a5afac625f04af
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Id0bb5266246dbd959c6497d7c411f908cc49318c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Board does not have ChromeEC.
Change-Id: Id6ab2495d6e082fdcb71ec5162efde877d97ce22
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Boards have unconditional select EC_GOOGLE_CHROMEEC.
Change-Id: Id444c83fc40f908d2257e8ec2606f149722a9bde
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I4fcec5bbc038a31565882631052ab07e38946e65
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change-Id: I56225c0a533e5f9e8294b7866a41c9a6c24a7f67
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This file is not used.
BUG=b:154756391
TEST=Build trembyle and check that peripherals still work
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I721e295546aa75c9745a4836425b6e3e0067afaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=b:154756391
TEST=Boot trembyle and see that /dev/mmcblk1 now exists
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ica83b78a7ab081d9eac9f5e267b2904dcde0b283
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Modify the FCH ACPI devices to query the PCI IRQ mapping registers for
their current IRQ numbers.
BUG=b:139429446, b:154756391
TEST=Boot trembyle and see that I2C and UART devices are finally
functional.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8f2035f74240ead4089ff4d503dfbeb447cf8de4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch enables enables the CSE Lite SKU for all the
puff variant boards.
BUG=b:143229683
TEST=Build and boot puff with CSE Lite SKU.
Cq-Depend: chrome-internal:3046770
Change-Id: I0de6bca162b01870ca554ae97bc4a41cf66fef18
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch modified the puff fmd files to support CSE Lite SKU.
* Reduce the SI_ALL size to 3MiB since ME binary size is less
than 2.5MiB.
* Increase the FW_MAIN_A/B size to accommodate the ME_RW update
binary with CSE Lite SKU.
BUG=b:154561163
TEST=Build and boot puff with CSE Lite SKU.
Cq-Depend: chrome-internal:3046770
Change-Id: I4d39a1bdeabf48fc740da67539f48a9ff72c442c
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41198
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These build on existing functions but use different object types
in order to provide functions for upcoming changes:
acpigen_write_return_op(): Return an operator.
acpigen_write_if_lequal_op_op(): Check if 2 operands are equal.
acpigen_get_package_op_element(): Read an element from a package
into an operator.
This one just provides the missing helper, the other 3 already exist:
acpigen_get_tx_gpio: Read TX gpio state.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I1141fd132d6f09cf482f74e95308947cba2c5846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41985
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FSP headers for Tiger Lake platform generated based FSP
version 3197, which includes below additional UPDs:
FSPM:
CmdMirror
RMTBIT
FSPS:
SataPortsEnableDitoConfig
BUG=b:157725468
BRANCH=none
TEST=build and boot volteer
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I23d6baacc3d963b473280c7fdb1e5df950cd7ca8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41974
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on schematic and gpio table of halvor, generate gpio setting and
overridetree.cb for halvor.
BUG=b:153680359
TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage
Verify that the image-halvor.bin is generated successfully.
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Ic6bd018551be58945742d1a6e7f7c5560f218e40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41426
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The config option APL_SKIP_SET_POWER_LIMITS was accidentally left out
during the set_power_limits refactor (SHA 2adb50d32e8). This patch
reinstates the config option which will cause APL boards to not set any
power limits.
TEST=util/abuild/abuild -p none -t siemens/mc_apl1 -a
Change-Id: Iec9f9f340d50a1212b6ef20c2c0e1b66385ae1b2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41786
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Call out the CSME-initiated bits from HPR_CAUSE0 register and
update the elog to include reset causes
Change-Id: I32ffb55ff2ad26ec4e7609c41fc65e021a327a14
Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
H1 is stable after HW rework. Connect +3.3V_ALW_PCH with +3.3V_PRIM.
Therefore change I2C speed back to FAST.
BUG=b:154885320
TEST=Check H1 I2C speed is 375kHz by scope. And no error message in
cbmem and kernel log.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If58721039d90514a17f024e6b432f3a5226440e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Right now all FSP2.0 based IA platform doesn't need this driver anymore
hence removing to avoid debug and maintenance effort.
TEST=Verified booting from SATA on SPT/CNP/ICP/TGP PCH platforms.
Change-Id: Ied3832b26ba1fdd4c30fafe8149689a01d302c3e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41674
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This explicitly enables TCSS xHCI, PCIe root ports and DMA controllers
from TGL RVP platform devicetree setting.
BUG=:b:146624360
TEST=Built and booted on TGL RVP.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I0111542eef253f469f679cdc4b81812438dff4ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
The definition of processor_rev_id in struct microcode
is 16 bits. So we need to change the a series of parameters
passing to 16 bits.
Change-Id: Iacabee7e571bd37f3aca106d515d755969daf8f3
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The ripto board is still being used for testing so make sure it supports
the same audio config as volteer.
BUG=b:147462631
TEST=build ripto variant
Change-Id: Iabeb73307418dc16b12fa60ad26923cd9f6e1f3a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
|
|
For all of the audio devices in devicetree.cb add the probe matches
that will determine if the device should be enabled or not based on
the selected audio daughter board type.
AUDIO=MAX98357_ALC5682I_I2S: enable max98357 and alc5628, disable others
AUDIO=MAX98373_ALC5682I_I2S: enable max98373 and alc5682, disable others
AUDIO=MAX98373_ALC5682_SNDW: enable soundwire devices, disable others
BUG=b:147462631
TEST=test different device present in ACPI based on fw_config value:
> AUDIO=NONE
ectool cbi set 6 0x00000000 4 2
> AUDIO=MAX98357_ALC5682I_I2S
ectool cbi set 6 0x00000100 4 2
> AUDIO=MAX98373_ALC5682I_I2S
ectool cbi set 6 0x00000200 4 2
> AUDIO=MAX98373_ALC5682_SNDW
ectool cbi set 6 0x00000300 4 2
Change-Id: I5492e8cddcff3ba01023b0daef02be3508d347b0
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41216
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the current firmware configuration table for the volteer mainboard
and define some actions based on probe results for audio:
- When I2S options are selected disable the SoundWire GPIOs.
- When SoundWire is enabled disable the I2S GPIOs.
- When no audio is enabled disable all the GPIOs.
BUG=b:147462631
TEST=Test that GPIOs are configured as expected based on the current
value of the fw_config field in cbi.
Change-Id: I179f8b6436be83a2b37911777764bd26a0d404b7
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41215
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Move all audio devices from baseboard to the volteer variant.
- Add max98373 devices and enable the driver
- Disable everything in FSP and let coreboot configure GPIOs.
BUG=b:147462631
TEST=this change makes all audio devices show up in ACPI, so this
was tested by ensuring that all audio devices are present in ACPI.
Change-Id: Ic654ea52a549053622603aa8c81fb37577d4e011
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change introduces a new top-level interface for interacting with a
bitmask providing firmware configuration information.
This is motivated by Chromebook mainboards that need to support multiple
different configurations at runtime with the same BIOS. In these
devices the Embedded Controller provides a bitmask that can be broken
down into different fields and each field can then be broken down into
different options.
The firmware configuration value could also be stored in CBFS and this
interface will look in CBFS first to allow the Embedded Controller value
to be overridden.
The firmware configuration interface is intended to easily integrate
into devicetree.cb and lead to less code duplication for new mainboards
that make use of this feature.
BUG=b:147462631
TEST=this provides a new interface that is tested in subsequent commits
Change-Id: I1e889c235a81545e2ec0e3a34dfa750ac828a330
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There's not a function that is the equivalent to
x86_setup_mtrrs_with_detect() but not solving for above 4GiB.
Provide x86_setup_mtrrs_with_detect_no_above_4gb() which is the
equivalent to x86_setup_mtrrs_with_detect() but instructs the MTRR
solver to not take into account memory above 4GiB.
BUG=b:155426691
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia1b5d67d6f139aaa929e03ddbc394d57dfb949e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41897
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that there is a generic solution in mtrr subsystem utilize
the API.
BUG=b:155426691,b:155322763
Change-Id: Ie349d5669808928c7470c99d25c57c784174b4e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41850
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce concept of var_mtrr_context object for tracking and
assigning MTRR values. The algorithm is lifted from postcar_loader
code, but it's generalized for different type of users: setting
MSRs explicitly or deferring to a particular caller's desired
actions.
BUG=b:155426691,b:155322763
Change-Id: Ic03b4b617196f04071093bbba4cf28d23fa482d8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
AGESA FSP provides additional ACPI tables that are required.
BUG=b:133337564, b:153675915
TEST=Boot trembyle to OS and dump ACPI tables.
ACPI: added table 2/32, length now 44
ACPI: * MCFG
ACPI: added table 3/32, length now 48
ACPI: * TPM2
TPM2 log created at 0xcc513000
ACPI: added table 4/32, length now 52
ACPI: * MADT
ACPI: added table 5/32, length now 56
current = cc635af0
Searching for AGESA FSP ACPI Tables
ACPI: * SSDT (AGESA).
ACPI: added table 6/32, length now 60
ACPI: * CRAT (AGESA).
ACPI: added table 7/32, length now 64
ACPI: * ALIB (AGESA).
ACPI: added table 8/32, length now 68
ACPI: * IVRS (AGESA).
ACPI: added table 9/32, length now 72
ACPI: * HPET
ACPI: added table 10/32, length now 76
Copying initialized VBIOS image from 0x000c0000
ACPI: * VFCT at cc63ca30
ACPI: added table 11/32, length now 80
ACPI: done.
ACPI tables: 102048 bytes.
[ 0.042326] ACPI: Early table checksum verification disabled
[ 0.048621] ACPI: RSDP 0x00000000000F0000 000024 (v02 COREv4)
[ 0.055011] ACPI: XSDT 0x00000000CC6310E0 00007C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.064506] ACPI: FACP 0x00000000CC634850 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.073998] ACPI: DSDT 0x00000000CC631280 0035CF (v02 COREv4 COREBOOT 00010001 INTL 20200110)
[ 0.083488] ACPI: FACS 0x00000000CC631240 000040
[ 0.088623] ACPI: SSDT 0x00000000CC634970 00103D (v02 COREv4 COREBOOT 0000002A CORE 20200110)
[ 0.098114] ACPI: MCFG 0x00000000CC6359B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.107606] ACPI: TPM2 0x00000000CC6359F0 00004C (v04 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.117100] ACPI: APIC 0x00000000CC635A40 0000A6 (v03 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.126592] ACPI: SSDT 0x00000000CC635AF0 00119C (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.136082] ACPI: CRAT 0x00000000CC636C90 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.145573] ACPI: SSDT 0x00000000CC6374A0 005419 (v02 AMD AmdTable 00000002 MSFT 02000002)
[ 0.155064] ACPI: IVRS 0x00000000CC63C8C0 000126 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.164556] ACPI: HPET 0x00000000CC63C9F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.174047] ACPI: VFCT 0x00000000CC63CA30 00D469 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic1e87c0f7a7c736592dd8c5c6765ef9a37ed7a40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41804
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add RP configuration settings like Advanced Error Reporting(AER),
Latency Tolerence Reporting (LTR), Max Payload and Active State Power
Management (ASPM).
Tested on CFL platform
Change-Id: Ifaf0cc86ea412ce246723613f99908946d89ccb0
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41679
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The porting of Asus P8Z77-M mainboard required changing certain Super
I/O configuration registers that were ignored in devicetree.cb because
they aren't listed as resources. Add the declaration so they can be
changed.
This change is nowhere near enough as the current structure is
insufficient to allow changing configuration registers in the 0xE?
range, which this board also needs.
TEST=Changes to config regs 0xf4, 0xf5 in LDN 9 are reflected when
inspected using superiotool -d.
Change-Id: Ia31aafda3fa9423d516b5d839ef5265e8e8ccdd2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41226
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change updates camera_clock_ctl.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: I76ec29210ecdde728ce55531d2b6657be87ce9da
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41954
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change updates gpio_op.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: I3ec442ad85f408135642a112873231ce7d39524e
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change updates pch_hda.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: I8e965560518decbfafabe9ac06066d28d59240d0
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change updates scs.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: Ic1b5f3395a1ea8a3dd2ac6b109f9a5abe65d137f
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
This change updates platform.asl to use ASL2.0 syntax. This
increases the readability of the ASL code.
TEST=Verified using --timeless option to abuild that the resulting
coreboot.rom is same as without the ASL2.0 syntax changes for wdoo.
Change-Id: Ie55bcd9ac2ca746c046ebe05140b2ac291fb0459
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Update Cooperlake-SP (CPX-SP) FSP header files to WW20 release.
As CPX-SP FSP engineering is on-going (the processor Mass Production
is some time in this year). These header files will be adjusted when
changes are necessary with newer FSP release. This commit corresponds
to FSP release WW20 (tag WHITLEY.0.PRB.0016.D.65).
Also update soc/xeon_sp code file and Skylake-SP header file accordingly
to use FsptPort80RouteDisable instead of PcdPort80RouteDisable.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: I8bc6882e47de23d83ba0f521bb12a10dace523ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I6d6a24cb66a104c549790f039049a17ecbef208f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
CB:35086 exposed that the devicetree listed an EC chip for which there
is no actual driver; the EC is entirely ACPI code (.asl) included by
the board's ec.asl. Remove the unnecessary EC chip driver from both
boards, as well as the unnecessary Kconfig selection for librem_bdw.
Test: build/boot Librem 13v1, 13v4, verify battery info etc still correct.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: I5cb0b51881ab8f14e9ec693485f673f4284b5f14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These changes are in accordance with the documentation:
[*] page 208-209
Intel(R) 64 and IA-32 Architectures, Software Developer’s Manual,
Volume 4: Model-Specific Registers. May 2019.
Order Number: 335592-070US
Tested on OCP Tioga Pass.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I5e1de8bcb651fb8ae8b106db1978235b0dd84c47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40523
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With this patch, the ThinkLight on the ThinkPad X230 can be controlled
through the OS. This was initially done for the X201 in f63fbdb6:
mb/lenovo/x201: Add support for ThinkLight.
After applying this patch, the light can be controlled like this:
echo on >/proc/acpi/ibm/light
echo off >/proc/acpi/ibm/light
Or through sysfs at /sys/class/leds/tpacpi::thinklight
Change-Id: Idd93b26f52eccb8fc79888f1e45117f26d694291
Signed-off-by: Stefan Ott <stefan@ott.net>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40669
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icecda127a7229c1410c73a6fdd0898430f7eceb2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40809
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1589fd8df4ec0fcdcde283513734dfd8458df2f7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I7c0be437e8cb49934913563c6d21056034a50095
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41684
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <cbfs.h>' -- src/) <(git grep -l 'cbfs_boot_map_optionrom\|cbfs_boot_map_optionrom_revision\|cbfs_boot_locate\|cbfs_boot_map_with_leak\|cbfs_locate_file_in_region\|cbfs_boot_load_file\|cbfs_load_and_decompress\|cbfs_prog_stage_load\|cbfs_boot_region_device' -- src/) |grep '<' |grep -v vendorcode
Also add missing 'include <cbfs.h>' in src/soc/qualcomm/sc7180/qupv3_config.c
Change-Id: Icaecb5b910888f34cddedab7b2f64eaf6d01ad66
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41682
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I79eea0a00c2de54f82b372229381534707a295bb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41681
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<types.h> is supposed to provide <commonlib/bsd/cb_err.h>,
<stdbool.h>,<stdint.h> and <stddef.h>. So remove those includes
each time when <types.h> is included.
Change-Id: I886f02255099f3005852a2e6095b21ca86a940ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: If8c7e26ebd954b19bfb8766b26570c6865ad255e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41676
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ica355292eeda9c386b49db97f021566d52943d40
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41673
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I07100361705ce421131b8a5d772cb5ba2d8722ff
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41672
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I54eda3d51ecda77309841e598f06eb9cea3babc1
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I658023f7c3535a2cddd8e11ca8bebe20ae53ffb0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41670
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If8048586e3693a8e6f63d9dc2800b073bab78628
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41669
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Guckian
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6dd004b417c27ff0b9f7e55557a9670f927d425c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ide01a922d7d8e500f9a0b507544010706661d7de
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40690
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop unused includes and add missing <intelblocks/systemagent.h>.
Change-Id: I06c8b2bf65283c3c1fcd25fdaae298b82fc0e09c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Change-Id: I57e064d26b215743a1cb06bb6605fc4fe1160876
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41491
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
