summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-10-11mb/google/guybrush: Add GPIO EC in RW to early GPIO tablesHsuan Ting Chen
Before attempting another commit 6260bf71 (vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main), ensure that guybrush programs GPIO_EC_IN_RW (GPIO_91) as an early GPIO so that it can be read from in verstage. Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Change-Id: Ia6dcb225bbca89f3a873aad75a7d67625cdd3742 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-10-11mb/google/dedede/var/galtic: Add fw_config probe for ALC5682-VD & VSFrankChu
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11) for codec selection. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:198713670 TEST=ALC5682-VD/ALC5682I-VS audio codec can work Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Iaba136a836b89f42411474ae733380e345cce687 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58162 Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-11mb/ocp/deltalake: Fix SMBIOS type 9 bugsJohnny Lin
1. Fix PCIe slot capabilities not being really read from an IIO root port device. The Hot-Plug capability of IIO root port cannot be enabled due to FSP limitation (v2.1-0.2.2.0), but the code should reflect the true capabilities by reading the root port device's CSR. 2. Initialize the characteristics flags to 0 in the for-loop to fix the issue of the flags values persists to the next iterations. Tested=On OCP Delta Lake, dmidecode -t 9 shows the expected results. For example without the fix it shows 'Hot-plug devices are supported' but in fact it's not: System Slot Information Designation: SSD1_M2_Data_Drive Type: x4 PCI Express 3 x4 Current Usage: Available Length: Short ID: 1 Characteristics: 3.3 V is provided PME signal is supported Hot-plug devices are supported Bus Address: 0000:00:1d.0 With the fix it shows the correct result: Handle 0x0016, DMI type 9, 19 bytes System Slot Information Designation: SSD1_M2_Data_Drive Type: x4 PCI Express 3 x4 Current Usage: Available Length: Short ID: 1 Characteristics: 3.3 V is provided PME signal is supported Bus Address: 0000:00:1d.0 Change-Id: Iea437cdf3da5410b6b7a749a1be970f0948d92d9 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58100 Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-11mb/siemens/mc_ehl2: Adjust Legacy IRQ routing for PCI devicesMario Scheithauer
On this mainboard there is a legacy PCI device, which is connected to the PCIe root port via a PCIe-2-PCI bridge. This device only supports legacy interrupt routing. For this reason, we have to adjust the PIR8 register (0x3150) which is responsible for PCIe device 25h. The bridge is connected to PCIe root port 7. The following routing is required: INTA#->PIRQC#, INTB#->PIRQD#, INTC#->PIRQA#, INTD#-> PIRQB# TEST: - Boot into system software Change-Id: Id6bb8d00458c4d1e3fefd01ac3848078355868d9 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-10-11mb/siemens/mc_ehl: Add variant_mainboard_final()Mario Scheithauer
In upcoming patches, we need mainboard specific adjustments. Change-Id: Icf9d829b19b2d26a39ad34be4658064083e9da6d Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-11mb/siemens/mc_ehl2: Enable LPC ComBMario Scheithauer
Enable LPC ComB on this mainboard. TEST: - Boot Linux and check with 'dmesg | grep tty' Change-Id: I7ec58685a723c177df18144011934b206e6425d0 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-11mb/siemens/mc_ehl2: Disable INTEL_LPSS_UART_FOR_CONSOLEMario Scheithauer
This mainboard uses an eSPI-to-LPC bridge for console output. For this reason, the internal LPSS UART must be disabled. Change-Id: I86777cf719def331f4d257ddd94e9a87125ebce8 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-11mb/siemens/mc_ehl2: Adjust GPIOsMario Scheithauer
Set the GPIOs according to the circuit diagram for this mainboard. Change-Id: I19dc24a16ee9f533b45879bf60fb441e24018cc8 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-11mb/siemens/mc_ehl2: Disable SATA Port 0Mario Scheithauer
This mainboard has only SATA Port 1 available with no device sleep feature. Change-Id: I338833f2f9bcb407599cfc676ead0b8a9d7379bd Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-11mb/siemens/mc_ehl2: Enable SD-CardMario Scheithauer
This mainboard has SD slot available and therefore it should be enabled. Change-Id: I0c97e2dc589bf6b89713a473925e42a20278f457 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-11mb/siemens/mc_ehl2: Move RTC RX6110SA from SMBus to I2C2Mario Scheithauer
This board has the RTC RX6110SA connected to the I2C2 instead of SMBus as in mc_ehl1. Set the bus speed for I2C2 to 100 kHz, since this RTC only supports the standard speed. TEST: - Console Log shows no errors for RX6110SA during I2C2 init - Finalize device for I2C 00:32 shows correct date and time Change-Id: I679c6397fa0d213a25eebaf8a9e0bda9941acd26 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-10-11mb/siemens/mc_ehl2: Update SPD for DDR4 devicesMario Scheithauer
Since this variant uses different DDR4 devices compared to mc_ehl1 in a memory down configuration, the SPD data file must be adapted. In a first configuration we use Micron MT53D512M32D2NP modules. Following values were adjusted according to this board characteristic and with help of Serial Presence Detect (SPD) for LPDDR3 and LPDDR4 SDRAM Modules JEDEC Spec and the Specification for this Micron modules itself: - SPD Byte 4 - only 4Gb density instead of 8Gb for mc_ehl1 - SPD Byte 5 - different Row and Column Address Bits - SPD Byte 29/30 - 4Gb LPDDR4 needs 130ns tRFCab - SPD Byte 31/32 - 4Gb LPDDR4 needs 60ns tRFCpb Change-Id: Icb25f418952f0c96117140863d0d9c897d814ac5 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-10-11mb/google/dedede/var/pirika: Add Synaptics I2C touchpad deviceAlex1 Kao
Add Synaptics touchpad device support in devicetree. BUG=b:201043984 BRANCH=dedede TEST=Touchpad device function is OK Change-Id: Ifb240d7113e401de827384697fc752a76fbf7ac7 Signed-off-by: Alex1 Kao <alex1_kao@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kirk Wang <kirk_wang@pegatron.corp-partner.google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-11drivers/intel/dptf: return package with valueSumeet Pawnikar
Return the package with a value for the dptf user space service. This is required in write tpch method for pch device under dptf driver. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I64e1bb04a6115c7f93c84a5d6644101ac1d3d8ba Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-11soc/intel/tigerlake: Add ACPI addition for USB4/TBT latency optimizationJohn Zhao
The PCI-SIG engineering change requirement provides the ACPI additions for firmware latency optimization. This change adds additional ACPI DSM function with both of FW_RESET_TIME and FW_D3HOT_TO_D0_TIME to the USB4/TBT topology. The OS is informed to reduce latency for upstream ports while connecting USB4/TBT devices. BUG=b:199757442 TEST=It was validated that the first connected device waits only 50ms instead of 100ms and all functions work on Voxel board. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I5a19118b75ed0a78b7436f2f90295c03928300d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-11drivers/intel/dptf: Add support for PCH methodsSumeet Pawnikar
Add various methods support for pch device under dptf driver. This provides support of different control knobs for FIVR. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I2d40fff98cb4eb9144d55fd5383d9946e4cb0558 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-11mb/google/brya/var/redrix: select CHROMEOS_DSM_PARAM_FILE_NAMEWisley Chen
Enable CHROMEOS_DSM_PARAM_FILE_NAME to report dsm parameter file name. BUG=b:197076844 TEST=build and check SSDT. Change-Id: I726e5854bc6a8fb125cb3b7572ddedff49c3c403 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-11mb/google/dedede/var/corori: Add ssfc codec ALC5682-VS supportIan Feng
Add ALC5682-VS codec support in corori. ALC5682-VD/ALC5682-VS use different kernel driver by different hid name. Update hid name depending on the AUDIO field of ssfc. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:201372531, b:194436265 TEST=ALC5682-VD/ALC5682-VS audio codec can work. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I2f3edb0b594066714b42050a411103a215e68b12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aseda Aboagye <aaboagye@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
2021-10-11mb/google/guybrush/var/nipperkin: Enable RTD3 support for eMMC as NVMeKevin Chiu
nipperkin has different H/W topology to guybrush that the eMMC device is on a different GPP: guybrush: GPP3 nipperkin: GPP2 Hence we need to enable RTD3 for nipperkin additionally which refers to this one: https://review.coreboot.org/c/coreboot/+/54967 BUG=b:200246826 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage run suspend test on eMMC sku Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I1dca8f9e4739514d2d024374d8686f27b25582a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-11soc/intel/dnv_ns: drop redundancies from soc_fill_fadtMichael Niewöhner
Drop overrides from `soc_fill_fadt` that do not differ from what common ACPI code already sets. Change-Id: I7a5f43f844b12ff0e9bc5c7426170383209c8e0a Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-09mb/system76: tgl-u: Add gfx register for GMA ACPITim Crawford
Add gfx register to System76 TGL-U boards so GMA ACPI data is generated. Change-Id: If944a90921b518efdcd5f0e0998bddb4f56e5764 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-09soc/intel/dnv_ns: add the Kconfig value for CPU_XTAL_HZMichael Niewöhner
Reference: Intel doc#558579 rev2.2 Change-Id: Iab5dca6eb42abc00bc7da33f640350e994f0bd02 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-08mb/google/brya: Add GPIO_IN_RW to all variants' early GPIO tablesTim Wawrzynczak
Before attempting another commit 6260bf71 ("vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"), ensure that brya's variants all program EC_IN_RW as an input GPIO in bootblock so that it can be read from in verstage. Change-Id: I6b1af50f257dc7b627c4c00d7480ba7732c3d1a0 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Hsuan-ting Chen <roccochen@google.com>
2021-10-08acpi: add macros for MSR and `unsupported` register resource typesMichael Niewöhner
These will be used in the follow-up change. Change-Id: I4723ffaf0adff8cb5b1717600ed4d1634768e2b7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-08mb/intel/adlrvp: Drop INTEL_CAR_NEM Kconfig select on ADL-M RVPBora Guvendik
This patch enables eNEM flow for ADL-M TEST=Able to build and boot ADL-M RVP using eNEM mode. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I69959f4c53f4073e6e8b51491747d8358b4c907b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-10-08mb/prodrive/hermes: Enable SATA power optimizerAngel Pons
Enable SATA power optimizer as recommended by Intel. Tested, a SATA SSD is still detected correctly by SeaBIOS (version 1.14.1). Change-Id: Ia6d29de08583dfc0c2d38e8395adcaa2c540ec7b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-08vc/mediatek/mt8195: fix misleading-indentation errorRex-BC Chen
Fix misleading-indentation error in dramc_pi_calibration_api.c. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I680e9e6fffaebb23bf1f156a7f614345e952ed95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-10-07mb/google/brya: Disable unused i2s pins for BT offloadSugnan Prabhu S
BT offload hardware design is using only i2s0 pins. Need to disable i2s2 pins which are not used. As per the hardware spec there is an OR operation between vgpio and physical gpio pins related to i2s2. During BT offload configuring the i2s2 pins to its native function is causing offload issue on proto 2 boards. BUG=b:201736222 TEST=Verified BT offload on brya on proto 1 and proto 2. Change-Id: Ifbc53848c6ad12e537216cac3c2871088c094f3d Signed-off-by: Sugnan Prabhu S <sugnan.prabhu.s@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-10-07mb/google/dedede/var/bugzzy: Update GPP_D5 configurationSeunghwan Kim
As we checked the panel doesn't display firmware screen if we hold GPP_D5(TOUCHSCREEN_RESET) low on bugzzy. It's because of that bugzzy uses the built-in touch screen on the panel, the panel seems like under reset state by the TOUCHSCREEN_RESET signal. This change sets default GPP_D5 level to high for bugzzy. BUG=b:None BRANCH=dedede TEST=built and verified bugzzy showed firmware screen Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I53e4fc52ceb14ba23c22d3c105f65634b09029f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Doan <edoan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-07mb/google/brya: Add PsysPmax setting to 145WRyan Lin
This patch adds the setting of PsysPmax to 145W according to the brya board design. BUG=b:195615830 TEST=emerge-brya coreboot chromeos-bootimage & ensure the value is passed to FSP by enabling FSP log & Boot into the OS Change-Id: I996a11f76fdc0c8babe0037219f5b43e45e459dd Signed-off-by: Ryan Lin <ryan.lin@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-07soc/intel/tigerlake: Hook up GMA ACPI brightness controlsTim Crawford
Add function needed to generate ACPI backlight control SSDT, along with Kconfig values for accessing the registers. Tested by adding gfx register on system76/gaze16 and booting Windows. Display settings has a brightness setting, and can change the brightness level. Change-Id: Id8b14c0b4a7a681dc6cb95778c12a006a7e31373 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-07sc7280: Add SHRM firmware supportRavi Kumar Bokka
SHRM is a system hardware resource manager. It is used to manage run time DDRSS activities. DDRSS stands for DDR subsystem. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board by trying DDR clocks which through SHRM RSI command. Change-Id: I44484573a829eaefbd34907c6fe78d427506a762 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-07soc/intel/cannonlake: Enable x86_64 supportPatrick Rudolph
Select HAVE_EXP_X86_64_SUPPORT. Tested on prodrive/hermes: Boots into Linux. Change-Id: I033ccd5dc793b637a2ac4271b450335464564885 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-10-07security/vboot: Remove vb2ex_hwcrypto stubsYu-Ping Wu
Now that the vb2ex_hwcrypto_* stub functions are included in vboot fwlib (CL:2353775), we can remove the same stubs from coreboot. BUG=none TEST=emerge-brya coreboot TEST=emerge-cherry coreboot BRANCH=none Change-Id: I62bdc647eb3e34c581cc1b8d15e7f271211e6156 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-10-07soc/intel/dnv_ns: correct size of GPE0 registers in FADTMichael Niewöhner
There are 4 GPE0 STS/EN register pairs, each 32 bit wide. However, SoC code sets a GPE0 block size of 4 byte length instead of 32 byte. The resulting value of `x_gpe0_blk.bit_with` is wrong, too (32 bit instead of 256 bit). Drop the overrides and let common ACPI code set the correct values based on `GPE0_REG_MAX`. Change-Id: I45ee0f6678784c292ee3ed3446bf3c0f2d53b633 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-07soc/intel/denverton_ns: Always enable SpeedStepDmitry Ponamorev
When "SpeedStep" is disabled on an Intel Atom C3538, the maximum CPU clock speed is always 800 MHz(min CPU clock). Оperating system cannot change the frequency. Avoid this issue allow "Intel Speed step" technology for processors that do not have "Intel Turbo Boost". Signed-off-by: Dmitry Ponamorev <dponamorev@gmail.com> Change-Id: Ia922e45c12e4239f1d59617193cdbde2a813e7d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: King Sumo <kingsumos@gmail.com>
2021-10-06sc7280: Enable UART driverRajesh Patil
Enable common Uart driver on sc7280 BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I015e21081391bfe85edf667685bf117401a9ec00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55963 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-06sc7280: Enable bootblock compressionRavi Kumar Bokka
This patch enables bootblock compression on SC7280. In my tests, that makes it boot roughly 10ms faster (which isn't much, but... might as well take it). Ref link: https://review.coreboot.org/c/coreboot/+/45855 BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Change-Id: I3564a7e531d769c8df16a1592ea98133d83b07b0 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-06ec/google/chromeec: Register USB-C mux operationsDerek Huang
Register USB-C mux operations to the generic interface. BUG=b:192947843 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: I576c9e4c6c82d6b4055b0a0a9a75c677d4b05220 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06ec/google/chromeec: Update google_chromeec_usb_pd_get_info()Derek Huang
google_chromeec_usb_pd_get_info() is used in ec.c only. Make it static and drop from ec.h. BUG=b:192947843 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: I4b3df4223d5c26ea1c1a52b26f7d49fa4c947de8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06ec/google/chromeec: Add new API for USB-C mux handlingDerek Huang
Add google_chromeec_get_usbc_mux_info() to obtain USB-C mux related information. BUG=b:192947843 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Idc27f23214c2d5b91334ae3efe248100329964ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/58059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06ec/google/chromeec: Add APIs for USB-C DP ALT modeDerek Huang
Add API to allow AP to send the command to EC to enter DP ALT mode and API to wait for DP HPD event. BUG=b:192947843 TEST=select ENABLE_TCSS_DISPLAY_DETECTION in Kconfig.name. Build coreboot and update your system. Boot the system you will find below message in the coreboot log with or without USB-C display connected: 'HPD ready after %lu ms' or 'HPD not ready after %ldms. Abort.'. Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Id11510c1ff58579ae2cddfe5a4d69646fd84f5c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06ec/google/chromeec: Update some PD and DisplayPort APIsDerek Huang
1. Update google_chromeec_pd_get_amode() to return bitmask. 2. Update google_chromeec_wait_for_displayport() to handle the updated return value of google_chromeec_pd_get_amode(). 3. Drop google_chromeec_pd_get_amode() from ec.h and make it static because it's not used outside of ec.c. BUG=b:192947843 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: I6020c4305e30018d4c97d862c16e8d642c951765 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06ec/google/chromeec: Update google_chromeec_usb_pd_control()Derek Huang
Add parameter `active_cable` to obtain the cable type (active or passive) which is needed for USB-C configuration for some SoCs (at least Intel TGL and ADL), change the function name to google_chromeec_usb_pd_get_info() for better understanding. BUG=b:192947843 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Ie91a3096d49d5dde75e60ab0f2f38152cef720f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06include/device: Generic interface for USB-C mux operationsDerek Huang
Create a generic interface to allow any of the EC or other drivers to provide set of USB-C mux operations. Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Ic5435f2054d1c9f114b06c3b4643e34713290e0d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06soc/intel/alderlake: Skip setting D0I3 bit for HECI devicesSubrata Banik
This patch skips setting D0I3 bit for all HECI devices by FSP. BUG=b:200644229 TEST=FSP-S UPD dump suggested `DisableD0I3SettingForHeci` UPD is set to `1`. Change-Id: I86d61c49b8f187611efd495712ad901184665f31 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57815 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-06soc/intel/alderlake: Perform `heci_finalize` prior to booting to OSSubrata Banik
`heci_finalize` ensures to put all heci devices to D3 by setting the D0i3 bit prior to booting to the OS. BUG=b:200644229 TEST=Verified D0i3 bit is set for all HECI devices prior to booting to OS. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I86d5959646522f9a2169bf13ae04d88b8f685e14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-06soc/intel/common: Helper function to check CSE device `devfn` statusSubrata Banik
This patch creates a helper function in cse common code block to check the status of any CSE `devfn`. Example: CSE, CSE_2, IDER, KT, CSE_3 and CSE_4. Currently cse common code is only able to read the device state of `PCH_DEVFN_CSE` CSE device alone. Additionally, print `slot` and 'func' number of CSE devices in case the device is either disable or hidden. BUG=b:200644229 TEST=Able to build and boot ADLRVP-P with this patch where the serial message listed the CSE devices that are disabled in the device tree as below: HECI: CSE device 16.01 is disabled HECI: CSE device 16.04 is disabled HECI: CSE device 16.05 is disabled Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I208b07e89e3aa9d682837380809fbff01ea225b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-06soc/intel/common/../cse: Allow D0i3 enable/disable for all CSE devicesSubrata Banik
This patch ensures to pass cse device function number as argument for `set_cse_device_state()` to allow coreboot to perform enable/disable of D0i3 bit for all CSE devices to put the CSE device to Idle state or Active state. BUG=b:200644229 TEST= Able to build and boot ADLRVP where `set_cse_device_state()` is able to put the CSE device toidle state or active state based on `devfn` as argument. Change-Id: Ibe819e690c47453eaee02e435525a25b576232b5 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-05lib/thread: Remove thread stack alignment requirementRaul E Rangel
CPU_INFO_V2 now encapsulates the cpu_info requirements. They no longer need to leak through to thread.c. This allows us to remove the alignment requirement. BUG=b:179699789 TEST=Reboot stress test guybrush 50 times. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0af91feddcbd93b7f7d0f17009034bd1868d5aef Reviewed-on: https://review.coreboot.org/c/coreboot/+/57928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-05Revert "soc/amd/cezanne: Disable Co-op multitasking"Raul E Rangel
This reverts commit 5f80e7c764b9a1cb46beeaa490a4f60be04abcd4. The smm_do_relocation failure has been fixed. I also added CPU_INFO_V2 into this patch to satisfy the dependency. BUG=b:194391185, b:179699789 TEST=reboot stress test guybrush for 50 iterations. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I134c14748711a9c9865e0cc3e3185825f85248ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/57894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-05lib/thread: Switch to using CPU_INFO_V2Raul E Rangel
CPU_INFO_V2 changes the behavior of cpu_info(). There is now only 1 cpu_info struct per cpu. This means that we no longer need to allocate it at the top of each threads stack. We can now in theory remove the CONFIG_STACK_SIZE alignment on the thread stack sizes. We can also in theory use threads in SMM if you are feeling venturesome. BUG=b:194391185, b:179699789 TEST=Perform reboot stress test on guybrush with COOP_MULTITASKING enabled. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5e04d254a00db43714ec60ebed7c4aa90e23190a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-05arch/x86,cpu/x86: Introduce new method for accessing cpu_infoRaul E Rangel
There is currently a fundamental flaw in the current cpu_info() implementation. It assumes that current stack is CONFIG_STACK_SIZE aligned. This assumption breaks down when performing SMM relocation. The first step in performing SMM relocation is changing the SMBASE. This is accomplished by installing the smmstub at 0x00038000, which is the default SMM entry point. The stub is configured to set up a new stack with the size of 1 KiB (CONFIG_SMM_STUB_STACK_SIZE), and an entry point of smm_do_relocation located in RAMSTAGE RAM. This means that when smm_do_relocation is executed, it is running in SMM with a different sized stack. When cpu_info() gets called it will be using CONFIG_STACK_SIZE to calculate the location of the cpu_info struct. This results in reading random memory. Since cpu_info() has to run in multiple environments, we can't use a compile time constant to locate the cpu_info struct. This CL introduces a new way of locating cpu_info. It uses a per-cpu segment descriptor that points to a per-cpu segment that is allocated on the stack. By using a segment descriptor to point to the per-cpu data, we no longer need to calculate the location of the cpu_info struct. This has the following advantages: * Stacks no longer need to be CONFIG_STACK_SIZE aligned. * Accessing an unconfigured segment will result in an exception. This ensures no one can call cpu_info() from an unsupported environment. * Segment selectors are cleared when entering SMM and restored when leaving SMM. * There is a 1:1 mapping between cpu and cpu_info. When using COOP_MULTITASKING, a new cpu_info is currently allocated at the top of each thread's stack. This no longer needs to happen. This CL guards most of the code with CONFIG(CPU_INFO_V2). I did this so reviewers can feel more comfortable knowing most of the CL is a no-op. I would eventually like to remove most of the guards though. This CL does not touch the LEGACY_SMP_INIT code path. I don't have any way of testing it. The %gs segment was chosen over the %fs segment because it's what the linux kernel uses for per-cpu data in x86_64 mode. BUG=b:194391185, b:179699789 TEST=Boot guybrush with CPU_INFO_V2 and verify BSP and APs have correct %gs segment. Verify cpu_info looks sane. Verify booting to the OS works correctly with COOP_MULTITASKING enabled. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I79dce9597cb784acb39a96897fb3c2f2973bfd98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-05drivers/intel/fsp2_0: don't force-use `python2`Michael Niewöhner
Some distributions (e.g. NixOS, Debian) are actively working on getting rid of EOL Python 2. Since `SplitFspBin.py` supports both Python 2 and Python 3 as of upstream commit 0bc2b07, use whatever version is present by utilizing `python`. Change-Id: I2a657d0d4fc1899266a9574cfdfec1380828d72d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-10-05src/soc to src/superio: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ieafbc93e49fcef198ac6e31fc8a3b708c395e08e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58082 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-05src/mainboard to src/security: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-05src/acpi to src/lib: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I5b8ecdfe75d99028fee820a2034466a8ad1c5e63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58080 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-05driver/intel/pmc_mux/conn: Add type-c port info to cbmemNick Vaccaro
This change adds type-c port information for USB type-c ports to cbmem. BUG=b:149830546 TEST='emerge-volteer coreboot chromeos-bootimage', flash and boot volteer2 to kernel, log in and check cbmem for type-c info exported to the payload: localhost ~ # cbmem -c | grep type-c added type-c port0 info to cbmem: usb2:9 usb3:1 sbu:0 data:0 added type-c port1 info to cbmem: usb2:4 usb3:2 sbu:1 data:0 Change-Id: Ic56a1ad1b617e3af000664147d21165e6ea3a742 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-04mb/google/trogdor: Add new vaviant quackingstickSheng-Liang Pan
New boards introduced to trogdor family. BUG=b:201263032 BRANCH=none TEST=make Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I8299ddda14eb82103f17f8464a14992aa757afa6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-10-04soc/intel/adl: Drop SGPM, RGPM and EGPM methodsMeera Ravindranath
These methods can now be dropped as Dynamic GPIO PM is enabled. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0c7b67b5414d8c80775ab7678ce7b12181af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-04mb/*/brya/variants/brask: Enable dynamic GPIO PMMeera Ravindranath
GPIO PM was disabled for brask to evaluate if longer interrupt pulses are required for ADL. Since ADL requires 4us long pulses (EDS:626817), GPIO PM can be enabled. This change drops the GPIO PM override and re-enables dynamic GPIO PM. TEST=Boot brask to OS, ensure no TPM errors. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0b8b66b5526d8b80775cb7588ce6b12181af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-10-04mb/intel/adlrvp{p,m}: Enable dynamic GPIO PMMeera Ravindranath
GPIO PM was disabled for adlrvp to evaluate if longer interrupt pulses are required for ADL. Since ADL requires 4us long pulses (EDS:626817), GPIO PM can be enabled. This change drops the GPIO PM override and re-enables dynamic GPIO PM. TEST=Boot adlrvp to OS, ensure no TPM timeout errors. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0b7b66b5525d8b80775ab7578ce6b12181af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-04mb/google/brya: Enable DDR4 SODIMM for braskDavid Wu
Enable SMBus to support DDR4 SODIMM for brask. Enable 'smbus' in brask device tree and add SPD addressese for the two DIMMs. Separate the Kconfig items of brya and brask. Move HAVE_SPD_IN_CBFS and CHROMEOS_DRAM_PART_NUMBER_IN_CBI to brya and add config SPD_CACHE_IN_FMAP to brask. Add a new section RW_SPD_CACHE to fmd for caching SPD data. The renamed romstage.c is used by both brya and brask and a new function variant_get_spd_info is provided to support the different SPD source types. BUG=b:194055762 BRANCH=None TEST=build pass Change-Id: I41c57a3df127356b8c7e619c4d6144dc73aeac72 Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-04src/soc/intel/alderlake: Add PsysPmax settingRyan Lin
This patch feeds PsysPmax setting to FSP through UPD and adds a PsysPmax member in chip information so that we can set PsysPmax through devicetree. The PsysPmax needs to be set correctly mapping to maximum system power. Otherwise, system performance would be limited due to the default PsysPmax setting in FSP is only 21W. BUG=b:193864533, b:195615830 TEST=Set PsysPmax to an example value eg 145 in devicetree && put debug code in FSP to print the PsysPmax value before sending to Pcode, ensure the setting is correctly programmed. Change-Id: Ia07aa815f90739240f110cab984068237c02d896 Signed-off-by: Ryan Lin <ryan.lin@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-04driver/intel/pmc_mux/conn: Move typec_orientation enum to coreboot_tables.hNick Vaccaro
Move the locally declared typec_orientation enum from chip.h to coreboot_tables.h. Change enum typec_orientation name to type_c_orientation for consistency with contents of coreboot_tables.h. Rename TYPEC_ORIENTATION_FOLLOW_CC to TYPEC_ORIENTATION_NONE. BUG=b:149830546 TEST="emerge-volteer coreboot" and make sure it compiles successfully. Change-Id: I24c9177be72b0c9831791aa7d1f7b1236309c9cd Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-04coreboot tables: Add type-c port info to coreboot tableNick Vaccaro
This change adds type-c port information for USB Type-C ports to the coreboot table. This allows depthcharge to know the usb2 and usb3 port number assignments for each available port, as well as the SBU and data line orientation for the board. BUG=b:149830546 TEST='emerge-volteer coreboot chromeos-bootimage' and verify it builds successfully. Cherry-pick CL to enable this feature for volteer, flash and boot volteer2 to kernel, log in and check cbmem for type-c info exported to the payload: localhost ~ # cbmem -c | grep type-c added type-c port0 info to cbmem: usb2:9 usb3:1 sbu:0 data:0 added type-c port1 info to cbmem: usb2:4 usb3:2 sbu:1 data:0 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Change-Id: Ice732be2fa634dbf31ec620552b383c4a5b41451 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-04lib/hardwaremain: change type of "complete" element in boot_state structFelix Held
A signed bitfield with a length of 1 bit can only have the values 0 and -1. Assigning a 1 ends up behaving as expected, but it's not the semantically correct thing to do there. Changing the type of the element to an unsigned bitfield with a length of 1 would fix that, but since this is used as a boolean value, just change it to bool type. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I230804335e7a15a8a9489859b20846988ba6c5cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-04lib/hardwaremain: add missing types.h includeFelix Held
The u8 type is used in the file, but neither stdint.h not types.h was included in the file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifd67aff9eba01f9618004c869f1473217b3aeae4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-04mb/google/brya/variants/kano: Correct MIPI camera infoLai, Jim
Correct OVTI2740 information for Kano: MIPI camera CIO port, HID and Link Freq BUG=b:200974074 TEST=Build and boot on Kano camera driver is not probed before, and it can now be probed properly after this change. Signed-off-by: Lai, Jim <jim.lai@intel.com> Change-Id: I4612c9d42cd59cba0991b763224f77b7af33770b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-02soc/intel/common: round PM Timer emulation frequency multiplierMichael Niewöhner
Round the PM Timer emulation frequency multiplier to the closest value to increase precision. Test: compared hexdumps of CML binaries for the expected result: before: 0x262E8B51, after: 0x262E8B52 Change-Id: Iafd645c248fc17943ea4be558ed7d01a301ba809 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57943 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-02soc/mediatek: add debug dump for ltiming and clock_divRex-BC Chen
ltiming and clock_div are not support for MT8173, so we separate them to weak function: mtk_i2c_dump_more_info() Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I3228c6953be5fac18a76029702b878a34c7563f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58074 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-02soc/mediatek: Fix I2C failures by adjusting AC timing and bus speedDaolong Zhu
1. The original algorithm for I2C speed cannot always make the timing meet I2C specification so a new algorithm is introduced to calculate the timing parameters more correctly. 2. Some I2C buses should be initialized in a different speed while the original implementation was fixed at fast mode (400Khz). So the mtk_i2c_bus_init is now also taking an extra speed parameter. There is an equivalent change in kernel side: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/i2c/busses/i2c-mt65xx.c?h=v5.15-rc3&id=be5ce0e97cc7a5c0d2da45d617b7bc567c3d3fa1 BUG=b:189899864 TEST=Test on Tomato, boot pass and timing pass at 100/300/400/500/800/1000Khz. Signed-off-by: Daolong Zhu <jg_daolongzhu@mediatek.corp-partner.google.com> Change-Id: Id25b7bb3a76908a7943b940eb5bee799e80626a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58053 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-02soc/intel/common/../cse: Avoid caching of CSE BARSubrata Banik
This patch ensures all attempts to read CSE BAR is performing PCI config space read and returning the BAR value rather than using cached value. This refactoring is useful to read BAR of all CSE devices rather than just HECI 1 alone. Additionally, change the return type of get_cse_bar() from `uintptr_t` to `void *` to avoid typecasting while calling read32/write32 functions. BUG=b:200644229 TEST=Able to build and boot ADLRVP where CSE is able to perform PCI enumeration and send the EOP message at post. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Id4ecc9006d6323b7c9d7a6af1afa5cfe63d933e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-02soc/intel/common/../cse: Append `_MS` with CSE_DELAY_BOOT_TO_RO macroSubrata Banik
CSE_DELAY_BOOT_TO_RO -> CSE_DELAY_BOOT_TO_RO_MS Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I4471e4553a081eaf5c8118e9600497a2b2437ac0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/dedede/var/bugzzy: Update device treeSeunghwan Kim
Update bugzzy device tree override based on the EVT schematics. BUG=b:195215785 BRANCH=dedede TEST=emerge-dedede coreboot Change-Id: Iba8e3fd24461b4228c6e6fa933c0093e3e45ee97 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-01soc/tigerlake: Make IO decode / enable register configurableSean Rhodes
This allows the one 32bit register to be configured in the devicetree in the same way that Skylake can be. i.e. register "lpc_ioe". Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib1a7f2707e565a5651ebe438320de9597f5742c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2021-10-01mb/google/brask/var/brask: Configure GPIOs according to schematicsDavid Wu
Update initial gpio configuration for brask BUG=b:197385770 TEST=emerge-brask coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I71026565b876739d2a08ef79940f47c476ca70a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58041 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-01soc/intel/alderlake: add power limits for Alder Lake-M 282 SKUSumeet Pawnikar
There are two different types of 282 SKU available with TDP of 15W and 12W for Alder Lake-M SoC. This patch adds support for these TDP values for 282 SKU as per document 643782. BUG=None BRANCH=None TEST=Build FW and test on adlrvp board Change-Id: I553b2362b7bf811e6bf02fd9d68f78c2caeb7398 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
2021-10-01mb/intel/adlrvp: set PL4 value dynamically for thermalSumeet Pawnikar
Set PL4 value dynamically for adlrvp board based on CPU SKUs which is detectable at runtime. These values are based on platform design specification. BUG=None BRANCH=None TEST=Build FW and test on adlrvp board On 682: Overriding power limits PL1 (4000, 28000) PL2 (64000, 64000) PL4 (140000) Change-Id: I9c0c418e2548cc7f9aa647a5ad98123b33e9f9b8 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/brya: move MILLIWATTS_TO_WATTS macro in header fileSumeet Pawnikar
Move MILLIWATTS_TO_WATTS macro in power_limit header file so all other files can use the same macro. BUG=None BRANCH=None TEST=Build FW and test on brya0 board Change-Id: Ic7ecba06b0e0a47546f7307cbfbc3ce0fc634bc3 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/intel/adlrvp: set power limits dynamically for thermalSumeet Pawnikar
Set power limit values dynamically based on CPU TDP and PCI ID of SKU. These values are as per platform design specification. BUG=None BRANCH=None TEST=Build FW and test on adlrvp board Change-Id: I8ba901fe7c978aad43b85a860c71b33bfbff2ff5 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01acpi/acpigen_dptf: Add TPCH participant for dptfSumeet Pawnikar
Add TPCH as participant for dptf control functionality. BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I17c0c6cfb7804dd2caa188acc93f1a63b47cab36 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01soc/intel/common: Add PMC IPC commands for FIVR controlSumeet Pawnikar
Add PMC IPC commands information for FIVR control functionality BUG=b:198582766 BRANCH=None TEST=Build FW and test on brya0 board Change-Id: I9d08bb71f7ea5da7614c68fc0ce4edf9aef59baa Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/brask: Correct SSD power sequenceEric Lai
M.2 spec describes PERST# should be sequenced after power enable. Follow up commit 658d7c5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I508f7e21888cc1938aa9a6f0066c17029773974b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/brya/var/felwinter: Correct SSD power sequenceEric Lai
M.2 spec describes PERST# should be sequenced after power enable. Follow up commit 658d7c5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I494e0edc135d730cf7bb437f0196cdf233d970d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01mb/google/brask/var/baseboard/brask: Update GPIO GPP_B5 and GPP_B6David Wu
Update GPIO GPP_B5 and GPP_B6 based on schematics. BUG=b:197385770 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If83e02eec7c48b9ab41d346aa8baef7c0c881df1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2021-10-01mb/siemens/mc_ehl: Move UART_FOR_CONSOLE switch to variant levelWerner Zeh
There are currently two variants for mc_ehl where different UARTs are used for the console. Move the Kconfig switch UART_FOR_CONSOLE to the Kconfig of the variant and select the matching value there. Change-Id: I7152013a0e32ff151b92932a47953705e591dc0d Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58052 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-01mb/siemens/mc_ehl: Add a new variant mc_ehl2Werner Zeh
Add a new variant of the mc_ehl board called mc_ehl2. This patch just copies the files and renames things where needed. Following patches will adapt the needed features for this new variant. Change-Id: I3ec3c091017fd66fe6a09216203cdc7c9e833846 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-10-01mb/siemens/mc_ehl1: Enable LPSS UARTWerner Zeh
Enable LPSS UART for coreboot console on mc_ehl1. Change-Id: Id995953741d48fbbe2482ff7c0ef81cac5a31207 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-10-01mb/google/brya/var/kano: Add Synaptics touchpadDavid Wu
Add Synaptics touchpad for kano. BUG=None TEST=emerge-brya coreboot and check touchpad function work. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Iec43aaa9525309d2a0e3c9822038869786f5fe66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-01arch/arm64: Remove unnecessary interfacesJulius Werner
<clocks.h> and smp_processor_id() aren't used anywhere anymore. Get rid of them. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I1a8c892b066e6ac0e7cec5316633d44165344e78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-01drivers/gic: Remove unnecessary codeJulius Werner
On AArch64 platforms, GIC initialization is generally the job of Trusted Firmware and shouldn't be necessary in coreboot. Only the ancient T210 platform (which was started before we had decided on using Trusted Firmware) calls this code, and even there they have a comment wondering "do we still need this?". I'm just gonna assume (without testing because that board is ancient and I'm lazy) that they don't, and that the TF GIC initialization[1] is sufficient here. Remove this obsolete driver. [1] https://review.trustedfirmware.org/plugins/gitiles/TF-A/trusted-firmware-a/+/3ff448/plat/nvidia/tegra/soc/t210/plat_setup.c#259 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I3e9d90039dd27cb3a13f830ba21fc5cc7a70abe2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-30mb/amd/bilby: Use I2S TDM interfaceAamir Bohra
Bilby uses I2S TDM interface for audio, instead of HDA interface. Change-Id: I7c8ec02d0e63730cb54a27d3bea1d102e037823d Signed-off-by: Aamir Bohra <aamirbohra@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: ritul guru <ritul.bits@gmail.com>
2021-09-30soc/intel/common/block/sgx: Fix typo in log messageAngel Pons
The value printed is the EPC (Enclave Page Cache) status, but the printk statement refers to it as `ECP status` instead. Fix the typo. Change-Id: Iba0a6013f2c537072dd7aa8266f2be3c5b0963ed Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58038 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-30soc/intel/alderlake: Add CPU ID 0x906a4Meera Ravindranath
TEST=Build and boot brya Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I4342c7343876eb40c2955f6f4dd99d6346852dc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
2021-09-30mb/intel/adlrvp_m: correct SSD power sequenceSelma Bensaid
This is to fix SSD detectiong failure in warm boot observed on ADL-M RVP. This patch implements the coreect power sequence: SSD_PREST Low - SSD_PWR_EN High - SSD_PREST High Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Change-Id: If6f9fc17a30c28c2948809cdbade9919d4ddd6c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-09-30soc/intel/common/../cse: Append the time units to the HECI macro namesSubrata Banik
Append `_MS` for miliseconds and `_US` for microseconds to HECI timeout macros to improve the code readability. Change-Id: Ic7f18f07ecaabb3e43356f372d15d18be083464b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-30soc/intel/common/cse: Late sending EOP msg if !HECI_DISABLE_USING_SMMSubrata Banik
Pushing EOP msg post FSP notify helps to save ~30ms+ boot time across various warm reboots. This patch ensures late sending EOP msg when function disabling of CSE is no longer a requirement. BUG=b:200644229 TEST=Able to save ~30ms+ of boot time Without this code change EOP sending timestamp as below: 943:after sending EOP to ME 1,248,328(61,954)) With this code change EOP sending timestamp as below: 943:after sending EOP to ME 1,231,660 (2,754) Change-Id: I2b78a1c07803aacfb34dce9e94b2a05a2491aabc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-30soc/intel/alderlake: Perform `soc_finalize` at entry of BS_PAYLOAD_BOOTSubrata Banik
This patch ensures soc_finalize() is getting called at the entry of BS_PAYLOAD_BOOT boot state instead of BS_PAYLOAD_LOAD, BS_ON_EXIT. The purpose of this change is to accommodate more time to push out sending CSE EOP messages at post. BUG=b:200644229 TEST=coreboot serial log suggests soc_finalize() is getting called as part of the BS_PAYLOAD_BOOT entry. Finalizing chipset. apm_control: Finalizing SMM. APMC done. BS: BS_PAYLOAD_BOOT entry times (exec / console): 21 / 15 ms Change-Id: I8632eca057255d7f4a38b64fd17c1f3d84123051 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-09-30soc/intel/common/../cse: Perform D0I3 bit reset/set prior sending EOPSubrata Banik
Prior to coreboot sending EOP messages during post, it's important to ensure that CSE is not in Idle state. In case CSE is in Dev Idle state (which means D0I3 bit is set), reset this bit before sending EOP command. This patch ensures coreboot has provision to send CSE EOP messages even after the FSP Notify phase without any delays waiting for the device to respond or timeout. BUG=b:200644229 TEST=Able to send CSE EOP message even after FSP Notify phase. Attempting CSE EOP msg sending post FSP notify without this code change causes `timeout` issue as below: BS: BS_PAYLOAD_LOAD exit times (exec / console): 171 / 0 ms Finalizing chipset. apm_control: Finalizing SMM. APMC done. HECI: Sending End-of-Post HECI: timed out reading answer! HECI: Failed to receive! HECI: receive Failed HECI: EOP send/receive fail ERROR: Failed to send EOP to CSE, 2 cse: CSE status registers: HFSTS1: 0x90000255, HFSTS2: 0xf10516 HFSTS3: 0x20 VB2:vb2api_fail() Need recovery, reason: 0x31 / 0xc Saving nvdata board_reset() called! full_reset() called! Attempting CSE EOP msg sending post FSP notify with this code change is `successful` as below: BS: BS_PAYLOAD_LOAD exit times (exec / console): 170 / 0 ms Finalizing chipset. apm_control: Finalizing SMM. APMC done. HECI: Sending End-of-Post CSE: EOP requested action: continue boot CSE EOP successful, continuing boot Change-Id: Iae1bc52e94b08f97004424ea0c147d6da8aca6e2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 21:35:49 +0000