summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-08-09mb/google/nissa/var/pujjo: Enable USB3.0 port 3 for WWANStanley Wu
Pujjo support WWAN device, enable USB3.0 port 3 for WWAN device BUG=b:241322361 TEST=Build and boot on pujjo Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: Iafe2ea18663794138e0a27879fc108d23eb81456 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-08-09mb/google/brya/var/ghost: update arbitrage gpio.c headerKevin Chowski
This update follows suggestions from Martin Roth about the contents of the comment. Change-Id: Ic296bcd6a0fb250426f5d75aac69a3fa0f2aaf32 Signed-off-by: Kevin Chowski <chowski@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-08mb/google/brya: Select SOC_INTEL_COMMON_UFS_SUPPORT for NissaMeera Ravindranath
BUG=b:238262674 TEST=Build and check ufs.c file gets compiled for Nissa boards Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: Idc5ad922b97bd1e65e5023f9126c43e42cfc38a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66064 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-08soc/amd/sabrina: Rename PSP SPL defaultMarshall Dawson
Change the SPL file from the 'cezanne' placeholder to a mendocino filename. Also, move the default location to blobs/mainboard since it's not board-agnostic. BUG=b:241543152 BUILD=Enable feature and build amd/chausie Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I47647c5d926484e25e3f893e72c671554e277a56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-08-08soc/amd/sabrina: Rename PSP whitelist defaultMarshall Dawson
Change the name of the whitelist file from the 'cezanne' placeholder to a mendocino path/to/file. Also, as whitelist files won't be pushed into a public repo, modify the path to point to site-local. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I49bbf1335606567735e36ed9bda1314bfc6247d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07soc/amd/sabrina: Use new mendocino amd_blobsMarshall Dawson
Modify sabrina's fw.cfg to point to the proper directory and use the standard names, as released by AMD. The name 'sabrina' was an alias used for the Mendocino product. The public-facing builds have been using Cezanne blobs, renamed as Sabrina or SBR, but can now take advantage of the appropriate blobs. BUG=b:239072117 TEST=Build amd/chausie Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Id646844e41980802be1e39dce96e5adaace4311d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07mb/google/skyrim: Resolve boot behaviorJon Murphy
Move GPIO init for SSD_AUX_RESET_L to ensure that eMMC devices will be initialized in time for the nominal boot flow. BUG=b:237701972 TEST=Boots to OS BRANCH=none Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: I610966fd9d31581f15d8bcd51f8a116c27fd6311 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66461 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-07mb/google/brya/var/ghost: Pull EN_PP3300_TCHSCR highJack Rosenthal
This gets the display working. BUG=b:240884260 BRANCH=firmware-brya-14505.B TEST=display works in both depthcharge and linux Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I03edac865d68ef48e86d47a04f27ed84894f2f7f Reviewed-on: https://review.coreboot.org/c/coreboot/+/66395 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-08-07superio/ite/common/early_serial.c: ite_kill_watchdog: set timeout to 0Michał Kopeć
Set the watchdog timeout to 0 in ite_kill_watchdog, as in some ITE models it is set to non-zero by default, activating the watchdog despite us setting the control register to 0. Based on: - "ITE IT8786E-I Preliminary Specification V0.4.1 (For D Version)" - Linux it87_wdt driver Change-Id: I1e78e2acc96e9dd0f283c5c674d3277d26cdee26 Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07mb/amd/chausie: Add Kconfig prompts to EC stringsMarshall Dawson
Make the default Microchip EC firmware path/to/file values overridable by adding prompts to the strings. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I300f78a11960dbe193165fcb379b7190e3de4545 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07pciexp_device: Handle unsupported requests in pciexp_get_ext_cap_offset()Bill XIE
Looking into pciexp_get_ext_cap_offset() it seems a little hackish and prone to endless loops. Either it should limit the loop or bail out when pci_read_config32() returns 0xffffffff, meaning "Unsupported Requests". This commit fixes an endless loop when the queried PCIe device is downstream of a legacy PCI bus which doesn't support extended config space, thus pci_read_config32() will return 0xffffffff, for example, the combination below with CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS enabled. TEST=Build and boot to OS in ASUS P8C WS with the following peripherals and CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS enabled: 00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4) 00:1c.4/00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9170 PCIe 2.0 x1 2-port SATA 6 Gb/s Controller [1b4b:9170] (rev 13) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a4) 00:1e.0/00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8111 PCI Express-to-PCI Bridge [10b5:8111] (rev 21) 00:1e.0/03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) 00:1e.0/00.0/00.0 Network controller [0280]: Qualcomm Atheros AR93xx Wireless Network Adapter [168c:0030] (rev 01) with 00:1c.4/00.0 being successfully tuned with pciexp_tune_dev(), and 00: 1e.0/00.0/00.0 not tuned as expected. Change-Id: Ibb92548c47288b40e851fcc0a8a37937e8bdbf3c Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66439 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2022-08-07payloads/tianocore: Remove the option for CorebootPayloadPkgSean Rhodes
Recent changes to both coreboot and edk2 means that UefiPayloadPkg seems to work on all hardware. It has been tested on: * Intel Core 2nd, 3rd, 4th, 5th, 6th, 8th, 8th, 9th, 10th, 11th and 12th generation processors * Intel Small Core BYT, BSW, APL, GLK and GLK-R processors * AMD Stoney Ridge and Picasso This includes the problematic Lenovo X230s. The most likely fixes are: * Configuring the PCI Base and Length in edk2 * Fixes to the HostBridgeLib in edk2 * Adjustment to the SD/eMMC initialisation timeout This means we can now remove the already deprecated option for CorebootPayloadPkg and the legacy 8254 timer build option. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ice7b7576eb3d32ea46e5138266b7df3fbcdcf7ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/65721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-08-07soc/intel/alderlake: Fix RPL-P 282 15W GT ICC MAXJeremy Compostella
The software used to read the document listing the VR settings turns out to not be perfectly compatible. Indeed, it displays a value of 55A for RPL-P 282 15W GT ICC MAX while the correct value actually is 40A. After a thorough review using the software used to create the document, it is the only value presenting a discrepancy. BRANCH=firmware-brya-14505.B BUG=b:239797178 TEST=build and boot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Iee293c87a66f0cd32714766e3ad81eee1a411723 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-08-07soc/amd/sabrina: Enable PSP Crypto Co-Processor (CCP) DMAKarthikeyan Ramasubramanian
Boot issue while using FW slot A has been root-caused to the usage of same TLB to map HW Crypto engines and SPI flash. With upcoming PSP release, this TLB usage conflict has been resolved. Hence enable CCP DMA. BUG=b:240175446 TEST=Build and boot to OS in Skyrim with PSP verstage using CCP DMA. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I2b12adb7e94e489bf07963a6f9a829cf4b36ad5c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66444 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07soc/amd/sabrina: Re-init eSPI in bootblockKarthikeyan Ramasubramanian
Currently bootblock does not initialize eSPI if it is already done in PSP verstage. But some other component is clobbering the eSPI configuration causing timeouts in EC communication after the boot flow hits x86. To workaround this issue, re-initialize eSPI in bootblock. BUG=b:217414563 TEST=Build and boot to OS in Skyrim with PSP verstage. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I41c0b2816a106a6a547f3cb372693e1bb7f23734 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-08-07mb/google/rex: Remove depedency on board id for early GPIO configTarun Tuli
This adds a default early GPIO table in the case of us not being able to identify a valid board ID. Primarily, this is useful in the case of EC issues to ensure that debug interfaces (e.g. UART) are always up and available. BUG=b:238165977 TEST=Boots and no errors on simics Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I135dc6c29bc23195afe5c78eb79992691652d9e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66394 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-07pci_device: Add a function to find PCI capability ID recursivelyBill XIE
Some PCI capabilities should only be enabled if it is available not only on a device, but also all bridge upstream of it. Checking only the device and the bridge just above it may not be enough. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I1237d3b4b86dd0ae5eb586e3c3c407362e6ca291 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66383 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-07pciexp_device: Fix a bug in pciexp_enable_ltr()Bill XIE
'parent_cap' should be found from 'parent' instead of 'dev'. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I99dab83d90287ca924d30dc4aeac0ff96e877e5c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2022-08-07vc/intel/fsp: Update ADL N FSP headers from v3222.03 to v3267.01Saurabh Mishra
Update generated FSP headers for Alder Lake N from v3222.03 to v3267.01. Changes include: - Add UPD Lp5BankMode - Update UPD Offset in FspmUpd.h BUG=b:240373012 BRANCH=None TEST=Build using "emerge-nissa intel-adlnfsp"and boot Nissa. Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com> Change-Id: I7b921e2aa467593a1c764fc554e2e83e8bb522e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66222 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-07mb/google/brya/variants/agah: update dptf settingTony Huang
1. Add active policy 2. Set critical policy trigger point to 105C 3. Correct TSR location BUG=b:240634844 TEST=emerge-draco coreboot values provided and verified by thermal team Change-Id: I0d91bad03cbdeea5c84b533580ac98072ce0110b Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-08-07mb/google/brya/acpi: Fix PERST# handling in GC6 exitTim Wawrzynczak
PERST# is supposed to be de-asserted in GC6 exit, but the original patch used the CTXS Method, which drives a GPIO low, instead of STXS, because PERST# is active-low. This patch fixes that. BUG=b:214581763 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib0adb8efe5e2cc733ae2228614c58c124ba3f11b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-08-07mb/google/brya/var/ghost: Disable LID_SHUTDOWNCaveh Jalali
The lid sensor is on a daughterboard which can cause unintended shutdowns when not connected. Disable lid sensor based shutdown behavior in depthcharge until we have a better solution. BUG=b:240005819 BRANCH=firmware-brya-14505.B TEST=booted ghost, no longer shuts down due to missing lid sensor Change-Id: I69f70255dee1b69e05b112c0174f5f52d1368837 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-07soc/intel/tigerlake: Expose In-Band ECC config to mainboardFrans Hendriks
Support for feature "In-Band ECC" not available for Tiger Lake Similar to Elkhart Lake, Tiger Lake also provides this feature. Ported from Elkhart Lake (CB:55668) Bug = N/A TEST = Build and boot Siemens AS-TGL1 Change-Id: Ie54d5f6a9747fad0105d0f8bf725be611bb8cf60 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-07mb/google/brya/acpi: Fix NVJT subfunction IDsTim Wawrzynczak
The POWERCONTROL and PLATPOLICY NVJT subfunctions were incorrectly set to 2 and 3, respectively. While looking at the ACPI code, Nvidia noticed these are supposed to be 3 and 4, also respectively, so this patch fixes that. BUG=b:214581763 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I0f808aba7072b943ee2fad20e06ff39a9b54903d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-08-07commonlib/timestamp_serialized: Add comment explaining "ignore for x86"Reka Norman
BUG=b:240624460 TEST=None Signed-off-by: Reka Norman <rekanorman@chromium.org> Change-Id: I8542c9bb624a366bc1bb01f6eae66ba97520d19c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66381 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-06mb/google/rex: Add memory config for rexTarun Tuli
Configure the rcomp, dqs and dq tables based on the schematic dated July 17/2022 and Intel Kit #573387. TEST=Built successfully Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I092f42db252052382d377a4ae48dc25f73080a3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66202 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-06util/elogtool: Mark redundant boot mode event type as `deprecated`Subrata Banik
This patch adds `_DEPRECATED_` tag to ChromeOS boot mode related event logging types as below: * ELOG_TYPE_CROS_RECOVERY_MODE <---- to record recovery boot reason while booting into recovery mode * ELOG_TYPE_CROS_DEVELOPER_MODE <--- if the platform is booted into developer mode. * ELOG_TYPE_CROS_DIAGNOSTICS <---- if the platform is booted into diagnostic mode. Drop static structure `cros_deprecated_recovery_reasons` as it has been replaced by vb2_get_recovery_reason_string() function. ELOG_TYPE_FW_BOOT_INFO event type is now used to record all those related fw boot info along with ChromeOS boot mode/reason etc. BUG=b:215615970 TEST=Build and boot google/kano to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I932952ce32337e2d54473667ce17582a90882da8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-08-05mb/google/brya/var/vell: Set GPP_B2 NC for RGB keybaordRobert Chen
When GPP_B2 output high, there is a leakage path. This patch fix it by setting the pin NC. BUG=b:233959105 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I3c833d5d62c715960dcb27494a0b9b93c91e8f2f Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-08-05vc/intel/fsp/mtl: Update header files from 2253_00 to 2304_01Srinidhi N Kaushik
Update header files for FSP for Meteor Lake platform to version 2304_01, previous version being 2253_00. FSPM: 1. Removed CpuCrashLogDevice 2. Address offset changes FSPS: Includes below new UPDs 1. VpuEnable 2. SerialIoI3cMode 3. ThcAssignment 4. PchIshI3cEnable BUG=b:240665069 TEST=emerge-rex intel-mtlfsp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I9740e5877af745124d573425da623e814d8df5d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66289 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-05soc/intel/mtl: Remove deprecated FSP optionSrinidhi N Kaushik
Remove the reference to `CpuCrashLogDevice` UPD since FSP v2304.01 has deprecated this UPD. BUG=b:240665069 TEST=build rex coreboot Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I23223fd7936a60d974229b553de255a7dcf4416b Reviewed-on: https://review.coreboot.org/c/coreboot/+/66357 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-04mb/intel/adlrvp: shorten MAINBOARD_PART_NUMBER to fix buildNick Vaccaro
Building firmware for Brya is currently broken due to the RO_FWID region for adlrvp_m_ext_ec bloating past 64 characters. The CONFIG_MAINBOARD_PART_NUMBER is catenated onto the CONFIG_MAINBOARD_VENDOR string, which for Intel, makes for a very long trunk string that the kernel version will then be added to form the RO_FWID string. For Intel, that trunk string is already pretty long at : "Intel Corporation_Alder Lake Client Platform". Shortening the CONFIG_MAINBOARD_PART_NUMBER should address this issue for now. BUG=b:241273391 TEST="emerge-brya coreboot chromeos-bootimage" and verify it builds successfully Change-Id: Ie862c87dd9a24743f249f1b10862ca6f3295db23 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2022-08-04soc/amd/cezanne/cppc: drop duplicate newlineFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I774be6d80e0aae725ecb1027501c8d66e0bf5a08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-08-04soc/amd/cezanne/cppc: reduce visibility of cpu_init_cppc_configFelix Held
This function is only called from the same compilation unit, so turn it into a static function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5c2deaa46f69c763df9612e39415b37c60d631be Reviewed-on: https://review.coreboot.org/c/coreboot/+/66398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-08-03mb/google/skyrim: Enable PSP verstageKarthikeyan Ramasubramanian
Enabling required config items to execute verstage in PSP. BUG=b:217414563 TEST=Build and boot to OS in Skyrim with PSP verstage. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Iee14dc80cb6691acb5cb59a21da5a3dff69f7dd2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66135 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03device: Fix 64Bit Device Resource Info PrintGang Chen
Use 0x016llx to print device resource info so that both 64bit and 32bit resources could be displayed correctly. Signed-off-by: Gang Chen <gang.c.chen@intel.com> Change-Id: I0ec4c47cca4a09ceb7dc929efaa5630b1f9df81c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-08-03drivers/i2c/dw_i2c: Re-add check for empty i2c transfer listNico Huber
The check was recently removed to allow callers to pass `count == 0`. Dereferencing the `msg` array is invalid in that case, though. Linux, where we borrowed the i2c interface from, also treats this with -EINVAL. Change-Id: I1eec02dd3a3fcf2d477a62cc65292fca40e469d3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2022-08-03dev/i2c_bus: Fix `count` argument in i2c_dev_detect()Nico Huber
We actually want the bus driver to process the 1 zero-length write we are passing. So set the count to 1. Change-Id: I5a41abb68c27a83715b6baec91ece9fa90b66a8c Signed-off-by: Nico Huber <nico.h@gmx.de> Tested-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66337 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2022-08-03soc/mediatek: Move common definitions to dramc_soc_common.hRex-BC Chen
Some definitions are the same in dramc_soc.h for MT8192, MT8195 and MT8186, so we move them to dramc_soc_common.h TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I3095333e62abf98de1f2d27033baeeba7a4cad79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66276 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03mb/google/geralt: Implement SKU ID and RAM codeRex-BC Chen
- Retrieve the SKU ID for Geralt via CBI interface. If that failed (or no data found), fall back to ADC channels for SKU ID. - The RAM code is implemented by the resistor straps that we can read and decode from ADC. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I31626e44bd873a3866c9bd1d511b476737f15a20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66275 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03mb/google/geralt: Configure GPIOsRex-BC Chen
Configure ChromeOS specific GPIOs: - Open-drain pins to high-z mode: GPIO_EC_AP_INT_ODL, GPIO_GSC_AP_INT_ODL and GPIO_WP_ODL. - GPO mode: GPIO_AP_EC_WARM_RST_REQ, GPIO_EN_SPKR and GPIO_XHCI_INIT_DONE. This patch is based on MT8188G_GPIO_Formal_Application_Spec_V0.3. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I84d3f62ec8a3966fe1982d5d4cf6ff270450d4bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/66274 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03mb/google/geralt: Configure TPMRex-BC Chen
Initialize I2C bus 1 for TPM control. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: If5807c9bb39260315ecbc55305def483bd2b8c51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66273 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03mb/google/dedede/var/beadrix: Update SoC gpio pin of DMICTeddy Shih
Update SoC GPIO setting of unused DMIC channel according to beadrix schematics. GPP_S2 : NF2 -> NC (DMIC1_CLK) GPP_S3 : NF2 -> NC (DMIC1_DATA) BUG=b:203113413, b:237224862 BRANCH=None TEST=on beadrix, validated by beadrix's DMIC working properly. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Ibe2f432cd74b546218ff4ee6e428e9eed9ac611f Reviewed-on: https://review.coreboot.org/c/coreboot/+/65381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-08-03mb/google/dedede/var/drawcia: Add Wifi SAR for oscinoShon Wang
Add wifi sar for oscino BUG=b:240373077 BRANCH=dedede TEST=enable CHROMEOS_WIFI_SAR in config of coreboot, emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage. Cq-Depend: chrome-internal:4893022 Change-Id: I44cbe8ee08d6136ed116623046893c9749795e50 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66176 Reviewed-by: Ivan Chen <yulunchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-08-03mb/google/dedede/var/beadrix: Update SoC gpio pin of BC1.2Teddy Shih
Update SoC GPIO setting of adding BC1.2 SLGC55545 according to beadrix schematics. GPP_A18 : NC -> NF1 (USB_OC0_N) BUG=b:214393595, b:226294980 BRANCH=None TEST=on beadrix, validated by beadrix's Type A working properly. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: I746931582cc12f49f7f1c667563350ebac8ddfa1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-08-03mb/prodrive/atlas: Select FSP_TYPE_IOTLean Sheng Tan
Atlas uses IoT FSP. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I4c20600e0b62367e6e58908cf9cf916f309e6362 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2022-08-03soc/intel/alderlake: Add config for IoT FSP supportLean Sheng Tan
Add new config FSP_TYPE_IOT to add the IoT FSP option so that respective mainboard Kconfig can use IoT FSP if needed. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I01d891348c039269138e64290ae3d6ec75d3c687 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-08-03mb/google/brya: Enable DRIVERS_GENESYSLOGIC_GL9755 for kuldaxDavid Wu
Enable DRIVERS_GENESYSLOGIC_GL9755 support for kuldax. BUG=b:232858957 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I1b2c0bff8497d727c697ea6287078055a39bd1f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-08-03mb/google/brya/variants/agah: set tcc_offset to 3Tony Huang
Set tcc_offset value to 3 in devicetree for Thermal Control Circuit (TCC) activation feature. This value is suggested by Thermal team. BUG=b:240600260 TEST=emerge-draco coreboot verified by thermal team Change-Id: I3044643d52f1d6e883beb3ec87a77f32d086f46c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-08-03soc/soc/intel: Add UFS device with ref-clk-freq propertyMeera Ravindranath
UFS storage devices require the bRefClkFreq attribute to be set to operate correctly in high speed mode. The correct value is determined by what the SoC / board supports. For the ADL UFS controller, it is 19.2 MHz. a) Introduce a new ACPI property "ref-clk-freq". b) Add support to configure this property using an SoC Kconfig. Kernel patch: https://web.archive.org/web/20220801060732/https://lore.kernel.org/all/ 20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeid/ BUG=b:238262674 TEST=Build,boot Nirwen and dump SSDT entries and check that the kernel correctly parses ref-clk-freq as 19.2 MHz. Scope (\_SB.PCI0) { Device (UFS) { Name (_ADR, 0x0000000000120007) // _ADR: Address Name (_DDN, "UFS Controller") // _DDN: DOS Device Name Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x01) { Package (0x02) { "ref-clk-freq", 0x0124F800 } } }) } } Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Signed-off-by: Reka Norman <rekanorman@chromium.org> Change-Id: I80c338a8a61f161b0feb6c5a3ca00cf5e0cfb36c Reviewed-on: https://review.coreboot.org/c/coreboot/+/66051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-08-03soc/amd/sabrina/fch: enable XTAL pad disabling in S0i3Felix Held
Switching off the pads of the internal crystal oscillator that connect to the crystal on the board in S0i3 saves a little power, so enable it. No measurements to quantify the power savings have been made. PPR #57243 revision 1.59 was used as a reference. BUG=b:237647468 TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I52f14ae5c614ad8ff0479b619de7164afa1e7648 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66336 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2022-08-03mb/google/herobrine: Add support to enable displayVinod Polimera
This change adds support to enable edp gpios, display init for herobrine. BUG=b:182963902,b:216687885 TEST=Validated on qualcomm sc7280 development board. Monitor name: LQ140M1JW49 Change-Id: I01dbe23afbb3d41d87f24cb7dcfa456cb7f133fb Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64885 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-03qualcomm/sc7280: Add support for edp and mdp driverVinod Polimera
- Add support for edp aux read and write. - Update edp panel properties based on edid read. - Configure edp controller and edp phy. Panel details: Manufacturer: SHP Model 1523 Serial Number 0 Made week 53 of 2020 EDID version: 1.4 Digital display 8 bits per primary color channel DisplayPort interface Maximum image size: 31 cm x 17 cm Gamma: 220% Check DPMS levels Supported color formats: RGB 4:4:4 Default (sRGB) color space is primary color space First detailed timing is preferred timing Supports GTF timings within operating range Established timings supported: Standard timings supported: Detailed timings Hex of detail: 5a8780a070384d403020350035ae10000018 Detailed mode (IN HEX): Clock 346500 KHz, 135 mm x ae mm 0780 07b0 07d0 0820 hborder 0 0438 043b 0440 0485 vborder 0 -hsync -vsync Did detailed timing Hex of detail: 653880a070384d403020350035ae10000018 Detailed mode (IN HEX): Clock 144370 KHz, 135 mm x ae mm 0780 07b0 07d0 0820 hborder 0 0438 043b 0440 0485 vborder 0 -hsync -vsync Hex of detail: 000000fd003090a7a7230100000000000000 Monitor ranges (bare limits): 48-144Hz V, 167-167kHz H, max dotclock 350MHz Hex of detail: 000000fc004c513134304d314a5734390a20 Monitor name: LQ140M1JW49 Changes in V2: - Remove Misc delays in edp code. - Move mdss soc code to disp.c - Update EDID read using I2C write & read. Changes in V3: - Remove unrelated delays. - Misc changes. BUG=b:182963902,b:216687885 TEST=Validated on qualcomm sc7280 development board. Monitor name: LQ140M1JW49 Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Change-Id: If89abb76028766b19450e756889a5d7776106f95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-08-03commonlib: Add support for rational number approximationVinod Polimera
This patch adds a function to calculate best rational approximation for a given fraction and unit tests for it. Change-Id: I2272d9bb31cde54e65721f95662b80754eee50c2 Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66010 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-02soc/intel/alderlake: Configure DDR5 Physical channel width to 64Meera Ravindranath
A DDR5 DIMM internally has two channels each of width 32 bit. But the total physical channel width is 64 bit. BUG=b:180458099 TEST=Boot DDR5 to kernel Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: Ic5e9c58f255bdf86a68ce90a4f853bf4e7c7ccfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/52730 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-08-02mb/google/dedede/var/pirika: Add Elan touchscreen supportFrankChu
Enable I2C2 and register touchscreen ACPI device for pirika. BUG=b:236564261 TEST=touch screen is functional. Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Id2fd5606b7126eabc1c88bf516198ff00b5d75dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/65967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-08-02mb/google/brya/var/ghost: Enable AMP powerEric Lai
Follow latest schematic, GPP_A17 is used to enable AMP power. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=Check I2C scan can see the AMP return ACK. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ia6c52302a12ddec68303714ac07e96a65a8f8fb8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-08-02mb/system76: Change touchpad detection methodTim Crawford
Use the new "detect" method instead of "probed". Fixes an uncommon issue where i2c-hid fails to initialize the device on Linux. Tested on: gaze15, gaze16-3060, lemp10, oryp8 Tested: - Linux: Touchpad works across 50 reboots - Windows: Touchpad is still detected as an I2C HID device - Windows: Extra I2C HID devices are not shown in Device Manager Change-Id: I6a899c64a6d77b65a2ae57ab8df81cd84b568184 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-08-02mb/google/geralt: Enable Chrome ECRex-BC Chen
Initialize SPI bus 0 for Chrome EC control. TEST=build pass BUG=b:236331724 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I6de5ea8a0273a3b0c725e4cdbcf69f4db74c5db7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-08-02soc/intel/alderlake: Add IRQ constraints for CPU PCIe portsTim Crawford
Copy the constraint from ADL-S to ADL-P. Fixes the following warning in Linux on System76 oryp9, which has an NVIDIA GPU on the bridge. pcieport 0000:00:01.0: can't derive routing for PCI INT A This, in turn, resolves an IRQ conflict with the PCH HDA device that would cause a stack track on every boot. irq 10: nobody cared (try booting with the "irqpoll" option) <snip> [<00000000bf549647>] azx_interrupt [snd_hda_codec] Disabling IRQ #10 Change-Id: I550c80105ff861d051170ed748149aeb25a545db Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66285 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-02mb/google/nissa/craask: Add eMMC DLL tuning valueSimon Yang
Configure eMMC DLL tuning values for Craask board. BUG=b:238985924 TEST="Use the value to boot on Nivviks and Craask successfully." Change-Id: I14f3e2329404cca94e14034d1fb52fcb99a2ddc9 Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66218 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-08-02mb/google/rex: Enable CSE Lite SKUSubrata Banik
The first CSE Lite SKU is available, therefore enable the Kconfig option to have the CSE reboot the system into its RW FW during a cold boot. BUG=b:240228892 TEST=TBD Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I00ef4176cf08cbeed06e446cfe68f06cb1ea27b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66287 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-02vc/google/elog: Record vboot FW boot information into elogSubrata Banik
This patch calls into vboot API (vb2api_get_fw_boot_info) to retrieve FW slot boot information like (tries count, current boot slot, previous boot slot, previous boot status and boot mode). Upon retrieval of the vboot information, elog callback from ramstage records the info into the eventlog. Additionally, this patch refactors the existing event logging mechanism to add newer APIs to record vboot firmware boot related information. BUG=b:215615970 TEST=Build and boot google/kano to ChromeOS and run below command to check the cbmem log: Scenario 1: localhost ~ # cbmem -c | grep VB2 [INFO ] VB2:vb2_check_recovery() Recovery reason from previous boot: 0x0 / 0x0 [INFO ] VB2:vb2api_fill_boot_config() boot_mode=`Developer boot` VB2:vb2api_get_fw_boot_info() fw_tried=`A` fw_try_count=0 fw_prev_tried=`A` fw_prev_result=`Success`. .... Scenario 2: localhost ~ # crossystem recovery_request=1 localhost ~ # cbmem -c | grep VB2 [INFO ] VB2:vb2api_fill_boot_config() boot_mode=`Manual recovery boot` VB2:vb2api_fill_boot_config() recovery_reason=0x13 / 0x00 VB2:vb2api_get_fw_boot_info() fw_tried=`A` fw_try_count=0 fw_prev_tried=`A` fw_prev_result=`Unknown`. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6882cd1c4dbe5e24f6460388cd1af4e4a05fc4da Reviewed-on: https://review.coreboot.org/c/coreboot/+/65561 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-01soc/amd/common/block/apob/apob_cache.c: Add assert for APOB DRAM sizeFred Reitberger
Add static check to ensure the reserved APOB DRAM space is the same size as the MRC_CACHE region specified in the fmap. Update sabrina APOB DRAM size to match the fmap. TEST: Timeless builds identical. Test build with a larger MRC_CACHE than APOB DRAM failed the assert as expected. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ia14f6ef94b9062df0612fe96098b1012085ccf9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65878 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-01soc/qualcomm: Fill coreboot table with PCIe infoVeerabhadrarao Badiganti
In order to pass PCIe base address to payloads, implement pcie_fill_lb() to fill coreboot table with PCIe info. BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe endpoint (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: I1ca2be55b98c8d1b86576072078cdda02ac55940 Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57614 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-08-01mb/google/herobrine: Add PCIe domain supportVeerabhadrarao Badiganti
Add PCIe domain support for herobrine by enabling it in the devicetree. BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe card (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path, that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: Ied8fbbc8d20698ee081d93ba184b7d0291bb6a76 Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65137 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-01soc/qualcomm/sc7280: Enable PCIe driverPrasad Malisetty
Enable PCIe functionality on sc7280 and supply all the needed data for PCIe generic platform driver. BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe card (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path, that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: I1f79a0ae2dea594d6026d55a15978eeb92a8ff18 Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com> Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66148 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-01mb/google/brya: Disable the Package C-state demotionZhixing Ma
Disabling the Package C-state demotion feature for brya baseboard as a work around to the S0ix issue and also this doesn't have any impact on the power and performance measured and verified by the PNP team. This feature will be enabled after its functionality is verified with no issues and also based on its impact on PNP. BUG=none BRANCH=firmware-brya-14505.B TEST=Boot and verified that S0ix issue is resolved. Signed-off-by: Zhixing Ma <zhixing.ma@intel.com> Change-Id: Id3941c8870d41b25488c8ac5d38534fa94664d4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-08-01include: Add SPDX-License-Identifiers to files missing themMartin Roth
This adds SPDX-License-Identifiers to all of the files in src/include that are missing them or have unrecognized identifiers. Files that were written specifically for coreboot and don't have license information are licensed GPL-2.0-only, which is the license for the overall coreboot project. Files that were sourced from Linux are similarly GPL-2.0-only. The cpu/power files were committed with source that was licensed as GPL-2.0-or-later, so presumably that's the license for that entire commit. The final file, vbe.h gives a pointer to the BSD-2-Clause license at opensource.org. Change-Id: I3f8fd7848ce11c1a0060e05903fb17a7583b4725 Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-08-01Revert "UPSTREAM: soc/amd/sabrina,vc/amd/fsp/sabrina: Add UART support for ↵Karthikeyan Ramasubramanian
Sabrina" This reverts commit 78261e308de5361b2ff045091e8fb18cad2a5035. Reason for revert: Now that PSP supports a soft fuse flag to toggle the verstage serial logs, prevent PSP verstage from writing to the UART. BUG=None TEST=Build and boot to OS in Skyrim with PSP verstage. Ensure that PSP verstage logs are not seen twice in the console. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I7ef2d585c320ea5903197939136dd2049a71af95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-01soc/amd/sabrina: Enable HW Modexp engineKarthikeyan Ramasubramanian
HW Modexp engine is verified to be working fine. Any verification failures during PSP verstage are because the firmware body is not read correctly. This might be because of the incorrect SPI ROM mapping. Hence enable the HW modexp engine for keyblock, preamble and firmware body verification. BUG=b:240175446 TEST=Build and boot to OS in Skyrim with PSP verstage using one of the FW slots. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8f6742630a7049354a24053fce28c477e53259e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-08-01drivers/elog: Use format stringMatei Dibu
clang shows the warning below: src/drivers/elog/elog.c:171:13: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security] elog_debug(msg); ^~~ Found-by: clang (13.0.1) Change-Id: I3f8949f9ce0c4ef4823530c61c503b0883bb5efc Signed-off-by: Matei Dibu <matdibu@protonmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66262 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-07-31soc/qualcomm: Add PCIe supportPrasad Malisetty
Add PCIe platform driver for Qualcomm platforms. Reference: - linux/drivers/pci/controller/dwc/pcie-qcom.c - Linux driver base commit: 82a823833f4e3769e82cdb4df1bc2234bc65b16c BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe card (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path, that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: Iccf60aa56541f5230fa9c3f821d7709615c36631 Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com> Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53902 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-30vendorcode/intel/fsp: Fix wrong licenseBora Guvendik
Fix the license in header file. BUG=none BRANCH=firmware-brya-14505.B TEST=none Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I025f7c571d09e4cc63a659279e63d17c098c01cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/66253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-07-30mb/hp/z220_series: Improve the port for z220_sff_workstationBill XIE
- Move configs for PCIe ports not present on z220_sff_workstation from the devicetree.cb of base board to the overridetree.cb of z220_cmt_workstation. - Add a note for ME/AMT Flash Override jumper, for it is hard to flash from OEM firmware either internally or externally without closing this jumper. - Add a side note for similar HP Compaq Elite 8300 SFF. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: I35d8b97f52a83910a61c12b1f7367ee7a19a9ad7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65703 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-30mb/google/brask/variants/moli: Add DPTF setting in MoliRaihow Shi
DPTF Policy and temperature sensor values from thermal team. BUG=b:236294162 TEST=emerge-brask coreboot Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Iebcfb74c4bc719e6d8d8d9317435becd912eaf85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-30security/vboot: Simplify image signingJakub Czapiga
futility now supports image truncation and signing of whole images with a single command invocation. Use it for vboot-enabled coreboot images. TEST=Build and run coreboot on google/volteer Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I49eb7e977b635ccb9f6c1b76e53c36e82be1d795 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-30arch/x86/acpi: Replace Store() with ASL 2.0 syntaxFelix Singer
Change-Id: I30bbd0288475fbefec55ce294e7963df1de6aa6a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-07-30arch/x86/acpi: Replace And() with ASL 2.0 syntaxFelix Singer
Change-Id: I21b954ce62259bb77d88775c3086cfac17dd90c7 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-07-30arch/x86/acpi: Replace LNotEqual(a,b) with ASL 2.0 syntaxFelix Singer
Replace `LNotEqual(a, b)` with `a != b`. Change-Id: If0e9fcea680d487c28a965e944b3333bb5a07026 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60696 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-30arch/x86/acpi: Replace LLess(a,b) with ASL 2.0 syntaxFelix Singer
Replace `LLess(a, b)` with `a < b`. Change-Id: Ief1d069ae0fb19a2179f08c2e9cf416367661e69 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60674 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29arch/x86/acpi: Replace Add(a,b,c) with ASL 2.0 syntaxFelix Singer
Replace `Add (a, b, c)` with `c = a + b`. Change-Id: If848d391e5ec33ebfb08515414739dbdd5011e08 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2022-07-29mb/google/rex: Perform display configuration overrideSubrata Banik
This patch enables display port configuration as per the Rex schematics. TEST=Able to dump FSP UPD to ensure the override is successful. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I9e81d037416e46e52cb72344425d6d8725dae192 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-07-29mb/google/nissa/var/pujjo: Enable OZ711LV2LN SD card controllerStanley Wu
Pujjoflex support OZ711LV2LN SD card controller, Select the Bayhub LV2 driver for OZ711LV2LN SD card. BUG=b:215487382 TEST=Build FW and checking SD card work as expected in OS. Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com> Change-Id: I6759fde1eaf24599a1fdb364d6e78f4e4e12f311 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-07-29mb/google/rex: Add LP5 RAM IDsTarun Tuli
Create RAM IDs for: DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) MT62F1G32D2DS-026 WT:B 1 (0001) MT62F2G32D4DS-026 WT:B 2 (0010) BUG=b:240289148 TEST=emerge-rex coreboot Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: Ib24e07bca363984db3484aa500f7d6ea4817e517 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-07-29soc/mediatek/mt8188: Add SPI supportLiya Li
The gpios and the tick delay register are different between MT8188 and previous MediaTek SoCs, so we need to add this patch to support SPI. TEST=build pass BUG=b:236331724 Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com> Change-Id: I6065b9d285dfd36c191f274f500fdb694920276e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66185 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Create GET_TICK_DLY_REG macro for SPI tick delay settingRex-BC Chen
MT8188 SPI tick delay setting is moved to `spi_cmd_reg` register which is different from previous SoCs, so we define a macro to get the designated register. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia30e94a8688c0e1c1d4b3d15206f28e5bd8c9bd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66184 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29mb/google/geralt: Initialize RTC and clk_buf in romstageRex-BC Chen
TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I869c0879d09e00cf66882adb728c9ccb6ac57e03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66183 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add clk_buf support in romstageSong Fan
TEST=build pass. BUG=b:233720142 Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com> Change-Id: Ic300b70a38ac204b098ca9ab15cf7045b66fd76d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66182 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add RTC supportSong Fan
Add RTC header file for SoC-specific settings. Add RTC support in romstage. TEST=build pass. BUG=b:233720142 Signed-off-by: Song Fan <ot_song.fan@mediatek.corp-partner.google.com> Change-Id: I38115ce0c9a4e1c1b2b7c8e6d40f47e99f7f86b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66181 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek: Move common definitions from rtc.h to rtc_reg_common.hRex-BC Chen
Move the common definitions to rtc_reg_common.h, so we can reuse those definitions on MT8188. TEST=build pass BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: Ia1d916a88b7cb875b35ee5813b7b52d9e98f5009 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66180 Reviewed-by: Yidi Lin <yidilin@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-29soc/mediatek/mt8188: Add AUXADC supportHui Liu
TEST=get voltage as 340mV for channel 0 in MTK EVB. BUG=b:233720142 Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com> Change-Id: Idd1edcce6cb62fcf6991bb9342c409150989c5ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/66121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-29soc/mediatek: Move struct mtk_auxadc_regs to auxadc_common.hRex-BC Chen
The AUXADC register definitions are the same for all MediaTek SoCs, so we move struct mtk_auxadc_regs to auxadc_common.h. TEST=build pass. BUG=b:233720142 Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Change-Id: I48978a93137a7de42f8ea2873be3130cb8f534f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-07-29mb/google/rex: Enable CNVi BT CoreSubrata Banik
This patch override `CnviBtCore` FSP UPD. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I90c9b360969aada0b0e031d62b48476fac5cee0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/66208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-07-29mb/google/brya/var/ghost: Enable CS42L42 codecEric Lai
Add CS42L42 support in device tree. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=Check cs42l42 driver can probe successfully in kernel. cs42l42 i2c-10134242:00: Cirrus Logic CS42L42, Revision: B1 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I861f47c12f4cebb016a4cfbe225f97d34d55e233 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-07-29mb/google/brya/var/ghost: Update all I2C buses speed to fastEric Lai
Remove the parameter and set I2C bus speed to fast. Will fill the tuning value after real tuning. BUG=b:240006200 BRANCH=firmware-brya-14505.B TEST=build passed. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Iba7fe4551959617ecfa49719c1124bf85d624c31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-07-29mb/google/brya: Create gaelin variantRaymond Chung
Create the gaelin variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:239514438 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_GAELIN Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Change-Id: I7f1ff8690c7c57f8960e004d0490d5cede8667f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-07-29soc/intel/alderlake: Add missing TDP and Power Limits for ADL-SMichał Żygowski
Add TDP and Power Limit settings for ADL-S 8+8 150W, 4+0 and 2+0. The System Agent PCI IDs were not present in older 2.1 revision of DOC #619501. Now that the mapping of these IDs to SKUs is known, fill the missing TDPs and Power Limit settings based on DOC #626343. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I23dd8478e60bcc81a1048f2f6e6717dd281d1a69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29soc/intel/alderlake: Set VccIn Aux Imon IccMax for ADL-S 4+0 and 2+0Michał Żygowski
Add missing System Agent PCI IDs for ADL-S 4+0 and 2+0 to configure VccIn Aux Imon IccMax. They were not present in older 2.1 revision of DOC #619501. Based on DOC #619501 rev 2.6. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Idfd57ce9b63db5d5fcc9d4efb8aa27ed7cc6222d Reviewed-on: https://review.coreboot.org/c/coreboot/+/66052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29soc/intel/alderlake/vr_config.c: Add VR params for ADL-SMichał Żygowski
Based on DOC #619501, #634885, #626343. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ib50db521e4d127a773f903b45d4bec5c5cc180d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-07-29intel/pmclib: Avoid PMC ABASE read of SLP_TYP and STATUS in ramstageHarsha B R
The patch updates platform_is_resuming() API such that platform resume state is determined from the saved state (CBMEM) instead of checking PMC registers (PM1_STS & PM1_CNT) as they are getting cleared (before/early) ramstage. coreboot sends DISCONNECT IPC command which times out during resume (S3) if system has servoV4 connected on port0. The issue occurs only during the first cycle of resume (S3) test cycle after cold boot due to side effect of platform_is_resuming() API that is not determining the resume (S3) state correctly in ramstage. PM1_STS and PM1_CNT register gets cleared at the start of ramstage. platform_is_resuming() function was checks the cleared register value and fails the condition of resume (S3) resulting in sending DISCONNECT IPC command. Checking the platform resume state from the CBMEM saved state using acpe_get_sleep_type() function helps cross verify the system previous state at the later part of ramstage. localhost ~ # cbmem -c | grep ERROR [ERROR] EC returned error result code 3 [ERROR] PMC IPC timeout after 1000 ms [ERROR] PMC IPC command 0x200a7 failed [ERROR] pmc_send_ipc_cmd failed [ERROR] Failed to setup port:0 to initial state [ERROR] PMC IPC timeout after 1000 ms [ERROR] PMC IPC command 0x200a7 failed [ERROR] pmc_send_ipc_cmd failed [ERROR] Failed to setup port:1 to initial state [ERROR] GENERIC: 0.0 missing read_resources [ERROR] PMC IPC timeout after 1000 ms [ERROR] PMC IPC command 0xd0 failed [ERROR] PMC: Failed sending PCI Enumeration Done Command BUG=b:227289581 TEST=Verified system boots to OS and verified below tests on Redrix (ADL-P) and Nivviks (ADL-N) 1. coreboot doesn't send the DISCONNECT during S3 resume 2. suspend S3 passes with both suzyq and servoV4 connected 3. After S3 resume, system detects the pen drive with Superspeed 4. After system resumes from S3, hot-plug the pen drive, system detects the pen drive Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I353ab49073bc4b5288943e19a75efa04bd809227 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66126 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:20:59 +0000