summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-07-30google/reef: Use GPE0_DW1_15 as wake signal for touchpadFurquan Shaikh
Due to GPE routing, raw GPIO cannot be used for indicating the wake signal for touchpad. Instead we need to reference GPE pins. BUG=chrome-os-partner:55670 Change-Id: Ie5d8473df4301c7beef0cae8fe84e71b2838261b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15947 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-30soc/intel/apollolake: Include gpe.h in chip.hFurquan Shaikh
This is required for using GPE_* macros in devicetree.cb. BUG=chrome-os-partner:55670 Change-Id: I8f6f536df96cf8145bb0c03ec413fb2f374301b5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15946 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-29skylake: fix VSDIO is at 0.8V when SDCard is not insertedZhuo-hao.Lee
1. Enable SoC SD_CMD/D* signals pull-down of 20k when SD-card is removed. When SD-card is disconnected, the pull-down is disabled. 2. Provide path for weak leakage from buffers of SD_CMD/D* signal to be grounded. Thus dropping voltage on the SD_CMD/D* signals to ~0V. BUG=chrome-os-partner:54421 TEST=no power leakage when SDCard isn't inserted on skylake platform Change-Id: I567199b172841125f8916a61a76005cfdaa62eb8 Signed-off-by: Zhuo-hao.Lee <zhuo-hao.lee@intel.com> Reviewed-on: https://review.coreboot.org/15910 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-29soc/intel/apollolake: Remove PEIM GFX from normal mode and S3 resumeAbhay Kumar
Do not pass VBT table to fsp in normal mode and S3 resume so that PEIM GFX will not get initialized. Change-Id: Iab7be3cceb0f80ae0273940b36fdd9c41bdb121e Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/14575 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-28google/gru & kevin: Update DRAM configurationLin Huang
We need to enable DRAM ODT on kevin/gru board to improve the DRAM signal. Note, if the DRAM ODT is enabled and set to 120ohms, the sdram VREF need to adjust to 840mv. This patch also makes following changes: 1. For compatiblity with the old board, add the "sdram-lpddr3-hynix-4GB-666-no-odt.inc" and "sdram-lpddr3-hynix-4GB-800-no-odt.inc" files which do not enable sdram ODT. 2. Delete the 300MHz dram inc file. The 300MHz sdram config just reduced 666MHz to 300MHz based on the 666MHz config file, and it is not stable, so delete it. 3. Delete the 928MHz dram inc file, 928MHz sdram config still in debuging, delete it for now. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Change-Id: If0248e1bc4cef2c298762080f1ca018653af0521 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 78d8a28e2d3489c99c9bba2c1c9aa76812e2e33f Original-Change-Id: I35f0685782d6fb178a95780ec77c45f565dd2194 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358763 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15813 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-28rockchip/rk3399: sdram: correct controller vref settingLin Huang
When enabling the controller ODT, the controller vref needs to correspond with the ODT value and DQ drive strength. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Original-Commit-Id: a7251c72b87d9f149b68d086c3252f1c668e0e80 Original-Change-Id: I7e54b3473f68a382208a0fb0b0600552fe6390ad Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358762 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Squashed with: rockchip/rk3399: Halt if we get an invalid odt or drv value When we were pushing the updated sdram.c to coreboot.org, the compiler there found that we were not initializing vref_value_dq in all code possible code paths. This patch updates those code paths to halt the system. Branch=none Bug=none Test=Built with coreboot.org toolchain and verified that the compile errors were gone. Change-Id: I0ad4207dc976236d64b6cdda58d10bcfbe1fde11 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/362726 Reviewed-by: Julius Werner <jwerner@chromium.org> Change-Id: I22a0cef6f12d9aae2ea4dcb99e7ebdd788f2cdd1 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/15812 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-28drivers/intel/fsp2_0: Update the copyrightsLee Leahy
Update the copyright dates in the FSP 2.0 files. Add a copyright to Kconfig. TEST=Build and run on Galileo Gen2 Change-Id: I0ad0c5650bde0e31d01a04bcc7d22a19273fe29b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15852 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-28google/reef: Write protect GPIO relative to bank offsetSusendra Selvaraj
Update the write protect GPIO reported in ACPI to GPIO_75. Also update the controller ID to "INT3452:01" which will point at the goldmont device and includes write protect GPIO. BUG=chrome-os-partner:55604 BRANCH=none TEST=verify crossystem output for wpsw_cur. Change-Id: Ibe6a013aaab18bfa2436698298177218ca934fab Signed-off-by: Susendra Selvaraj <susendra.selvaraj@intel.com> Reviewed-on: https://coreboot.intel.com/7929 Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com> Tested-by: Petrov, Andrey <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28soc/intel/apollolake: Update FSP Header files for version 146_30Brandon Breitenstein
Add new UPDs for Fspm and Fsps. Update headers to make new UPDs available for use. New UPDs enable various memory and trace funtionality options as well as support for zero sized IBB region. BUG=chrome-os-partner:55513 BRANCH=none TEST=built and tested with no regressions Change-Id: Id1573baaa306ed4fe4353df5f27e5963cb1a76e6 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/15815 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28intel/apollolake: Update gnvs for dptfShaunak Saha
This patch updates dptf variable in gnvs based on device configuration by reading the device tree structure. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal in Amenia and Reef board. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: I8ab34cdc94d8cdc840b02347569a9f07688e92cd Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15620 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28intel/apollolake: Add soc specific DPTF valuesShaunak Saha
This patch adds apollolake soc specific change. DPTF ASL files are now in src/soc/intel/common so that they can be reused but different soc can have different values e.g., for skylake cpu soc thermal reporting device is at Bus 0, Device 4, Function 0 while for apollolake it is Bus 0, Device 0, Function 1. This patch adds a dptf asl file in soc directory where we can define all values which can change across soc's and can be included in mainboard dptf asl. BUG=chrome-os-partner:53096 TEST=In Amenia and Reef board verify that the thermal zones are enumerated under /sys/class/thermal in Amenia and Reef board. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: I888260a9c799d36512411a769f26dd30cf8d5788 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15619 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-28intel/common: Add ASL code for DPTFShaunak Saha
This patch adds the common ASL code for Intel platforms. This is the basic ASL needed to add support for DPTF controlled devices. We are moving these commmon ASL files to src/soc/intel/common/acpi as these are same codes used in all Intel platforms and hence no need to duplicate. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: I01078382a9008263c6ad99f6bf07558885af6a63 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15093 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-28intel/common/opregion.c: only write 16 bytes to 16 byte fieldMartin Roth
Including the terminating null, 17 characters were being written to the field, overwriting the a byte of the size field. Fortunately, the size was updated soon after this. Fixes coverity warning 1229570 - Destination buffer too small. Change-Id: I39285a9283dd9a17d638afe5b2755c7e420d7698 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15889 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28arch/riscv: Refactor bootblock.SJonathan Neuschäfer
A few things are currently missing: - The trap handler doesn't set the stack pointer, which can easily result in trap loops or memory corruptions. - The SBI trampolin page (as described in version 1.9 of the RISC-V Privileged Architecture Specification), has been removed for now. Change-Id: Id89c859fab354501c94a0e82d349349c29fa4cc6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15591 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28arch/riscv: Only initialize virtual memory if it's availableJonathan Neuschäfer
And do the detection just before the initialization. Change-Id: I9a52430262f799baa298dc4f4ea459880abe250e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15831 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28arch/riscv: Remove spinlock code from atomic.hJonathan Neuschäfer
These functions are not used anywhere. Change-Id: Ica1f4650e8774dd796be0aff00054f3698087816 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15829 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28intel/fsp1_1: Add C entry support to locate FSP Temp RAM InitSubrata Banik
FSP temp ram init was getting called earlier from ROMCC bootblock. Now with C entry boot block, it is needed to locate FSP header and call FspTempRamInit. Hence add fsp 1_1 driver code to locate FSP Temp ram and execute. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built kunimitsu and ensure FSP Temp Ram Init return success Change-Id: If40b267777a8dc5c473d1115b19b98609ff3fd74 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15787 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28skylake/devicetree: Add LPC EC decode rangeSubrata Banik
Define LPC decode ranges for EC communication. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and boot kunimitsu to ensure no EC timeout error Change-Id: Idefdd79e67e89a794195c6821fee16550d1eda53 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15898 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28skylake/mainboard: Define mainboard hook in bootblockSubrata Banik
Move mainboard post console init functionality (google_chrome_ec_init & early_gpio programming) from verstage to bootblock. Add chromeos-ec support in bootblock BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and boot kunimitsu till POST code 0x34 Change-Id: I1b912985a0234d103dcf025b1a88094e639d197d Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15786 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28soc/intel/skylake: Add C entry bootblock supportSubrata Banik
List of activity performing in this patch - early PCH programming - early SA programming - early CPU programming - mainborad early gpio programming for UART and SPI - car setup - move chipset programming from verstage to post console BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and booted kunimitsu till POST code 0x34 Change-Id: If20ab869de62cd4439f3f014f9362ccbec38e143 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15785 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28soc/intel/skylake: Do cache as ram and prepare for C entrySubrata Banik
Enable cache-as-ram and prepare for c entry in bootblock. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and booted kunimitsu till POST code 0x2A Credits-to: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3412216cdf8ef7e952145943d33c3f07949da3c1 Reviewed-on: https://review.coreboot.org/15784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28soc/intel/skylake: Use init_vbnv_cmos from vboot vbnvFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: I7a536bc1cab51e7c942b2e0e48dfe18d8de08a6e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15925 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28soc/intel/broadwell: Use init_vbnv_cmos from vboot vbnvFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: Ie38cdbec513e2bb66e276399c8b4490cbe34a747 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15924 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28chromeos/gnvs: Clean up use of vboot handoffFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: I40a28f921499ddf43d8b423f5192ac93b40254c1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15903 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-28chromeos: Clean up elog handlingFurquan Shaikh
1. Currenty, boot reason is being added to elog only for some ARM32/ARM64 platforms. Change this so that boot reason is logged by default in elog for all devices which have CHROMEOS selected. 2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that want to add details about watchdog reset in elog. This requires a special region WATCHDOG to be present in the memlayout. 3. Remove calls to elog add boot reason and watchdog reset from mainboards. BUG=chrome-os-partner:55639 Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28google/urara: Provide dummy implementations of rec/dev functionsFurquan Shaikh
This is required to enable elog support in ChromeOS by default. BUG=chrome-os-partner:55639 Change-Id: I9c97143d794de4bf220ddf67c0ca2eac2f7a326d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15896 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28qualcomm/gale: Add required files to enable elog in ramstageFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: Idbad4f8763be18002907a62be755b2fdf7e479ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15895 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28qualcomm/storm: Add required files to enable elog in ramstageFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: Ie859ec3ff682e91a4d7d38d3c3cd6badf7385431 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15894 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28i2c/ww_ring: Add ww_ring files to ramstageFurquan Shaikh
These files are required by storm and gale boards for enabling elog support in ramstage. BUG=chrome-os-partner:55639 Change-Id: I2bbfee2acf2bfe2f896a8619b1276dcea1b87f16 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15893 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28google/chromeos: Use vboot bootmode functions for elog add boot reasonFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: I3ac2b256862758bb5c9e6c2f1311972af474e8f6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15870 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28bootmode: Get rid of CONFIG_BOOTMODE_STRAPSFurquan Shaikh
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and developer mode check functions to vboot. Thus, get rid of the BOOTMODE_STRAPS option which controlled these functions under src/lib. BUG=chrome-os-partner:55639 Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use of verified boot library without having to stick to CHROMEOS. BUG=chrome-os-partner:55639 Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15867 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-27drivers/intel/fsp2_0: Update MRC cache with dead version in recoveryFurquan Shaikh
If the system is in recovery, store the newly generated MRC data using a dummy version which is not legit. This ensures that on next normal boot, new MRC data will be generated and stored. BUG=chrome-os-partner:55699 Change-Id: Ib13e8c978dc1b4fc8817fab16d0e606f210f2586 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15828 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27soc/intel/common: Store MRC data in next available slot in the cacheFurquan Shaikh
Currently, coreboot performs an erase of the entire MRC cache region on flash if there is a version mismatch for the MRC data. Instead of doing that, store the new MRC data in the next available slot, if there is enough space available in the cache region. BUG=chrome-os-partner:55699 Change-Id: Ib24a94f0a47c79941ed9f60095360ae3aad5540b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15915 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27mainboard/google/slippy: remove unobtainable mainboardAaron Durbin
The slippy board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I24fb08d9be35b2367e7aa64520ce5778ab861535 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15902 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27mainboard/google/bolt: remove unobtainable mainboardAaron Durbin
The bolt board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I5ca055d448659a2b8e2eafcfc2114a6b8f8a56a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15901 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27soc/intel/apollolake: Disable monitor mwaitBora Guvendik
The monitor/mwait is broken on Apollolake. So use ACPI legacy mwait IO redirection as a work around BUG=chrome-os-partner:55110 Change-Id: I2e1834130d9586b4310466d3549d19bf427ffe24 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/15890 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-27Rename VB_SOURCE to VBOOT_SOURCE for increased clarityPaul Kocialkowski
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system, providing increased clarity about what it represents. Since the submodule itself is called "vboot", it makes sense to use that name in full instead of a very shortened (and confusing) version of it. Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15824 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-27chromeec: Use CHROMEEC_SOURCE with fallback instead of hardcoding pathPaul Kocialkowski
This introduces a CHROMEEC_SOURCE variable used for indicating the CrOS EC source path, with a fallback to 3rdparty/chromeec. This allows specifying an external path for the CrOS EC source path. Change-Id: I9792c7f21597127a385b961b65a00d44cfa37146 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15765 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-27arch/x86: Add bootblock and postcar support for SOC MTRR accessLee Leahy
Quark does not support the rdmsr and wrmsr instructions. Use SOC specific routines to configure the MTRRs on Quark based platforms. Add cpu_common.c as a build dependency to provide access to the routine cpu_phys_address_size. TEST=Build and run on Galileo Gen2 Change-Id: I43b7067c66c5c55b42097937e862078adf17fb19 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15846 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27cpu/x86: Support CPUs without rdmsr/wrmsr instructionsLee Leahy
Quark does not support the rdmsr and wrmsr instructions. In this case use a SOC specific routine to support the setting of the MTRRs. Migrate the code from FSP 1.1 to be x86 CPU common. Since all rdmsr/wrmsr accesses are being converted, fix the build failure for quark in lib/reg_script.c. Move the soc_msr_x routines and their depencies from romstage/mtrr.c to reg_access.c. TEST=Build and run on Galileo Gen2 Change-Id: Ibc68e696d8066fbe2322f446d8c983d3f86052ea Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15839 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27nb/intel/x4x: Fix CAS latency detection and max memory detectionDamien Zammit
Now hardcode maximum memory frequency capability to 800MHz, as all chipsets in x4x family support PC2-6400 according to the datasheet. CAS latency detection also relies on this, and has been cleaned up. Ram initialization does not work with FSB 1333MHz / DDR2 800MHz combination, so disable this combination for now, and reduce to 667MHz instead. Still don't know why this is the case, but FSB1333/667 works. These changes should now allow existing configurations to continue working, while providing support for previously unworking configurations, due to previous buggy CAS latency detection code. TESTED: on GA-G41M-ES2L CPU: E5200 @ 2.50GHz (FSB 800MHz) 2x 1GB 667MHz hynix worked @ 667 1x 2GB 800Mhz ARAM worked @ 800 1x 1GB 667Mhz StarRam worked @ 667 2x 2GB 800Mhz (generic) worked @ 800 Change-Id: I1ddd7827ee6fe3d4162ba0546f738a8f9decdf93 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15818 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-27device: include devicetree in bootblock stageAaron Durbin
Allow bootblock to get access to the static device tree like other early stages. device_romstage.c was renamed to device_simple.c to better articulate the usage since it's not just being used in romstage. BUG=chrome-os-partner:55357 Change-Id: I3d63d2754c737cc738c09a3e3b3b468362fb78d1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15837 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins)
2016-07-27soc/nvidia/tegra124: remove cache_policiy optionAaron Durbin
All mainboards (nyans) utilizing the cache_policy option has it set to DCACHE_WRITETHROUGH. This option is for setting the framebuffer's cache attribute. However, this option is reliant on an architecture-specific enumeration. Just remove the option and use DCACHE_WRITETHROUGH across the board. If someone wants to reconfigure it at a later date one can introduce a non-architecture specific option. Change-Id: I6a0848231f5e28d36ec2d56b239bed67619fe5a7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15838 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-26drivers/intel/fsp2_0/header_util: Convert UPD headersLee Leahy
Convert the FSP 2.0 UPD headers from typedef to struct: * FSP_UPD_HEADER * FSPM_ARCH_UPD TEST=Build and run on Galileo Gen2 Change-Id: Iab241ea07c955e95ff988a4a30103d2a112179b6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15856 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-26google/oak: dsi: set mipi pin driving control onMartin Roth
We set this driving control to prevent signal attenuation caused by LVDS DRV termination. When DA_LVDSTX_PWR_ON is not set, LVSH has no power and LVDS DRV termination status is unknown(floating). This creates a chance that MIPI output would be influenced. The DSI's LP signal will be half voltage attenuation. There will be no display on panel. When DA_LVDSTX_PWR_ON is set, LVSH and LVDS DRV termination are effective and termination is fixed OFF. The DSI won't be influenced. We only need to set this register once, so we set it here to prevent repeat setting in the kernel when the system goes to recovery mode. BUG=chrome-os-partner:55296 BRANCH=none TEST=build pass elm and show ui The original commit in the cros repo combined the chipset and mainboard code changes. This has been split for the push to coreboot.org Change-Id: I733bdd115950b71493856220414ac0dd75d28122 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0d25a27f300acc4b65a894110d3ee0cc9676cd12 Original-Change-Id: Ie71f9cc41924787be8539c576392034320b57a49 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360850 Original-Commit-Ready: jitao shi <jitao.shi@mediatek.com> Original-Tested-by: jitao shi <jitao.shi@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15808 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-26meditek/mt8173: dsi: set mipi pin driving control onJitao Shi
We set this driving control to prevent signal attenuation caused by LVDS DRV termination. When DA_LVDSTX_PWR_ON is not set, LVSH has no power and LVDS DRV termination status is unknown (floating). This creates a chance that MIPI output would be influenced. The DSI's LP signal will be half voltage attenuation. There will be no display on panel. When DA_LVDSTX_PWR_ON is set, LVSH and LVDS DRV termination are effective and termination is fixed OFF. The DSI won't be influenced. We only need to set this register once, so we set it here to prevent repeatedly setting in the kernel when the system goes to recovery mode. BUG=chrome-os-partner:55296 BRANCH=none TEST=build pass elm and show ui Change-Id: Ie3ccf6fb611dd5a1e2c02b7825d42a92e61268c0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 0d25a27f300acc4b65a894110d3ee0cc9676cd12 Original-Change-Id: Ie71f9cc41924787be8539c576392034320b57a49 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/360850 Original-Commit-Ready: jitao shi <jitao.shi@mediatek.com> Original-Tested-by: jitao shi <jitao.shi@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15807 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-26arch/x86: Generate a map file for the postcar stageLee Leahy
Place a map file for the postcar stage and place it into build/cbfs/fallback. TEST=Build and run on Galileo Gen2 Change-Id: I349c06e3c610db5b3f2511083208db27110c34d0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15845 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-26arch/x86: Organize ramstage to match other stagesLee Leahy
Move the ramstage files to the beginning of the section. Eliminate duplicate conditionals. TEST=Build and run on Galileo Gen2 Change-Id: I461a5b78a76bd0d2643b85973fd0a70bc5e89581 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15892 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-26arch/x86: Move romstage files into romstage sectionLee Leahy
Move the romstage files into the romstage section of the file. Eliminate duplicate conditional statements. TEST=None Change-Id: Ie2d65cef3797a2c091c0cd76b147b30a765332ad Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15891 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-26arch/x86: Move postcar stage commands into placeLee Leahy
Move the postcar commands to in between romstage and ramstage. Add the stage header. TEST=Build and run on Galileo Gen2 Change-Id: I530da6afd8ccbcea217995ddd27066df6d45de22 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15844 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-26drivers/elog: put back 4KiB limitAaron Durbin
The removal of ELOG_FLASH_BASE and ELOG_FLASH_SIZE resulted in the FMAP region for the eventlog to be honored. However, certain systems seem to have a large eventlog region that wasn't being used in practice. Because of the malloc() in the eventlog init sequence a large allocation was now being requested that can exhaust the heap. Put back the 4KiB capacity until the resource usage is fixed. BUG=chrome-os-partner:55593 Change-Id: Ib54b396b48e5be80f737fc3feb0d58348c0d2844 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15835 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-26intel car: Use MTRR WRPROT type for XIP cacheKyösti Mälkki
XIP cachelines contain the executable to run, we never want that to get modified. With the change such erronous writes are ignored and next cacheline miss will fetch from boot media (SPI / FWH flash). Change-Id: I52b62866b5658e103281ffa1a91e1c64262f3175 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15778 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-26intel sandy/ivy: Redefine DCACHE_RAM_SIZE and DCACHE_RAM_MRC_VAR_SIZEKyösti Mälkki
Match the definition and use of these variable with haswell, such that DCACHE_RAM_MRC_VAR_SIZE is not included in DCACHE_RAM_SIZE. Change-Id: I5af20f63cd0cb631d39f7c7fe0e2a99ebd3ce986 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15761 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-26lib: Don't require ULZMA compression for postcarLee Leahy
The build fails during postcar when ULZMA compression is not selected. Fix cbfs.c to support LZ compression for ramstage as well. The build error is: build/postcar/lib/cbfs.o: In function `cbfs_load_and_decompress': /home/lee/coreboot/public/src/lib/cbfs.c:116: undefined reference to `ulzman' make: *** [build/cbfs/fallback/postcar.debug] Error 1 TEST=Build and run on Galileo Gen2 Change-Id: I7fa8ff33c0d32e0c5ff5de7918e13e6efb1df38e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15841 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-26drivers/intel/fsp2_0: Enable XIP romstage with loaded FSP-MLee Leahy
Separate NO_XIP_EARLY_STAGES from loading FSP-M into cache-as-RAM. Quark executes romstage directly from the SPI flash part (in-place), but loads FSP-M into ESRAM. This split occurs because ESRAM is too small to hold everything while debugging. Platforms executing FSP-M directly from the SPI flash need to select FSP_M_XIP. TEST=Build and run on Galileo Gen2. Change-Id: Ib5313ae96dcec101510e82438b1889d315569696 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15848 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-26src/lib: Enable display of cbmem during romstage and postcarLee Leahy
Enable the display of cbmem during romstage and postcar. Add a Kconfig value to prevent coreboot images from increasing in size when this feature is not in use. TEST=Build and run on Galileo Gen2 Change-Id: Ib70ad517ebf7d37a7f46ba503b4432c7c04d7ded Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15842 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-25drivers/uart: Enable debug serial output during postcarLee Leahy
Build the UART drivers for the postcar stage. TEST=Build and run on Galileo Gen2 Change-Id: I8bf51135ab7e62fa4bc3e8d45583f2feac56942f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15843 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-25intel/skylake: Select VBOOT_SAVE_RECOVERY_REASON_ON_REBOOTFurquan Shaikh
This allows the board to save the recovery request in case of unexpected reboots caused by FSP. With recovery module in vboot handling the saving of recovery reason across reboots, there is no need to have special fsp reset handling under soc. BUG=chrome-os-partner:55431 Change-Id: I0b7ce14868a322072d3e60c1dae43f211b43fdbf Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15804 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-25intel/apollolake: Select VBOOT_SAVE_RECOVERY_REASON_ON_REBOOTFurquan Shaikh
This allows the board to save the recovery request in case of unexpected reboots caused by FSP. BUG=chrome-os-partner:55431 Change-Id: If71802d2cba52a426f4c2db90d6c5384ed03ce68 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15803 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25rockchip/rk3399: set CA drive strength to 48ohmsLin Huang
As shown in testing, if CA use 34.3ohms drive strength, it leads to an overshoot. To fix this, change the drive strength to 48 ohms. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Change-Id: I8666474fc18391da14a3338611f962f2f08f36d0 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: fbc1c13f9ab808fc907b2e3f9bde1d09f92980f1 Original-Change-Id: I231f5b1bd45ff262686fbacbaf119a8a57fad27b Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358761 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15811 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25google/gru: Change UART _Static_assert() condition to #ifJulius Werner
_Static_assert() gets evaluated even when the code path it's in is unreachable (e.g. inside an if (0) block). Unfortunately, Kconfigs that depend on a disabled Kconfig are always 0, meaning that CONFIG_CONSOLE_SERIAL_UART_ADDRESS on Gru cannot evaluate to UART2 when CONFIG_CONSOLE_SERIAL (which it depends on) is disabled. Switch the condition it is wrapped in to a preprocessor #if so that the _Static_assert() is not evaluated when building without serial support. BRANCH=None BUG=None TEST=Built and booted Kevin without serial Change-Id: I391325fcc4b7d64b4866a7fce4444e2f28365b7d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: f5e5cf0644154eca5b347ea381df3f6b28287524 Original-Change-Id: I33d51d4ef09b218c14173d39a12795f0cef6bb40 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361581 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/15810 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25google/chromeos: Add support for saving recovery reason across rebootFurquan Shaikh
On some x86 platforms (skylake, apollolake), we observe reboots at different steps during the FSP initialization. These additional reboots result in loss of recovery request because vboot_reference library clears recovery request on vbnv once verification is complete and it has made a decision about which boot path to take(normal/dev, slot-a/slot-b, recovery). Provide a way to allow mainboards/chipsets to inform recovery module in vboot2 to save recovery reason to survive unexpected reboots. The recovery reason is set in vbnv after vboot_reference library completes its verification and clears the reason in vbnv while jumping to payload. BUG=chrome-os-partner:55431 Change-Id: Ie96be9aeb42c8209d8215943409e6327d6a8bf98 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15802 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-25google/gale: Fix board ID and GPIO config.Kan Yan
Fix the board ID handling. Recovery switch and WP status GPIO has been reassigned in board rev3. Configure related GPIOs based on Board ID. BUG=chrome-os-partner:55320 TEST=Verified GPIO assignment for Rev.1 board. BRANCH=None Change-Id: Id8e1ba1c039f8b5b503f0da038e5cfc84b72678f Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: d295ab514e31d9ebd1b77e0af9b769e64cbf567e Original-Change-Id: I6d3d5df2e9017f7845edc3cd0b2c19ad7c58a97c Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/361393 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/15809 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-25lib/bootmode: Use newly-add recovery moduleFurquan Shaikh
Use the newly added check recovery request function from recovery module in vboot2 to check for a pending recovery request. BUG=chrome-os-partner:55431 Change-Id: I354cc094f1e5d0044cf13e5bc28246f058d470c6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15801 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25google/chromeos: Add recovery module in vboot2Furquan Shaikh
Add recovery module in vboot2 that checks if a recovery request is pending and returns appropriate reason code: 1. Checks if recovery mode is initiated by EC. 2. Checks if recovery request is present in VBNV. 3. Checks if recovery request is present in handoff for post-cbmem stages. 4. Checks if vboot verification is complete and looks up selected region to identify if recovery is requested by vboot library. BUG=chrome-os-partner:55431 Change-Id: I31e332a4d014a185df2434c3730954e08dc27281 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15800 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25vboot: Clean up vboot codeFurquan Shaikh
1. Remove unused functions/structures. 2. Add checks for NULL return values. 3. Change prefixes to vb2 instead of vboot for functions used internally within vboot2/ 4. Get rid of vboot_handoff.h file and move the structure definition to vboot_common.h 5. Rename all functions using handoff structure to have prefix vboot_handoff_*. All the handoff functions can be run _only_ after cbmem is online. 6. Organize vboot_common.h content according to different functionalities. BUG=chrome-os-partner:55431 Change-Id: I4c07d50327d88cddbdfbb0b6f82c264e2b8620eb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15799 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25skylake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: Iafabb6373dfe16aaf0fe2cbc4e978952adeb403e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15822 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25apollolake: Move CHROMEOS config to SoCFurquan Shaikh
All the mainboards share the same config options for CHROMEOS. Instead of duplicating those in every mainboard, move the CHROMEOS config to SoC and make it dependent on MAINBOARD_HAS_CHROMEOS. BUG=chrome-os-partner:55431 Change-Id: I2d54ff6beac9fca7596a8f104e3c1447cada5c05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15821 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-25intel/amenia: Add chromeos.c to verstageFurquan Shaikh
BUG=chrome-os-partner:55431 Change-Id: I94fe54c12d7438a71f81a9053cc9785c0aa1e6cf Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15823 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-25google/jecht: Increase RO coreboot size on flashDaisuke Nojiri
Bitmap images have been moved to CBFS from GBB. This patch adjusts the flash size accordingly for jecht. BUG=chromium:622501,chromium:628494 BRANCH=none TEST=emerge-jecht chromeos-bootimage CQ-DEPEND=CL:361380 Change-Id: I941df04b4999d35bd652e4ee1664c032cb550b29 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: c859ce04d2df5f21c47a164cabbc9ef6dec61818 Original-Change-Id: I50a9ade2e90237b0a7c277bffd7b540132415f13 Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/361370 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15806 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-24google/reef: Enable PS/2 keyboard driver by defaultDuncan Laurie
This device has a built-in keyboard that should be enabled by default or it will not work in firmware. This was tested to ensure that TAB (display info) and Ctrl+D (enter developer mode) are functional at the Chrome OS recovery screen. BUG=chrome-os-partner:55549 Change-Id: I60156f1fc001b88deac69e03e02e9d8277fbc38d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/15782 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-24soc/intel/apollolake: ensure usb port 0 is in host modeAaron Durbin
The controller for device mode USB is not plan of record on apollolake. However, one still needs to configure the one port to be host mode by default such that the devices work as expected when plugged into the board. BUG=chrome-os-partner:54581,chrome-os-partner:54656 TEST=Enabled xdci controller. Used USB type C->A dongle to check that a mass storage device worked on port 0 on reef. Change-Id: Ia9ec5076491f31bc5dc3d534e235fb49f7b2efac Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15781 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-24drivers/elog: remove elog Kconfig variablesAaron Durbin
Now that FMAP is a first class citizen in coreboot there's no reason to have alternate locations for ELOG. If one wants eventlog support they need to specify the ELOG entry in the FMAP. The one side effect is that the code was previously limiting the size to 4KiB because the default ELOG_AREA_SIZE was 4KiB. However, that's no longer the case as the FMAP region size is honored. Change-Id: I4ce5f15032387155d2f56f0de61f2d85271ba606 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15814 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-23intel/haswell: Remove useless MTRR clearKyösti Mälkki
At this state, variable MTRRs are disabled. We overwrite this MTRR entry before they are re-enabled. Change-Id: Ieedf90f65514d848905626e75be496e08f710d91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15794 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-23intel/haswell post-car: Minor fix on MTRR settingKyösti Mälkki
Change-Id: I65f0ad430bdcc2065c1e873743da04201a68d9c9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15796 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-23intel/haswell: Add asmlinkage for romstage_after_car()Kyösti Mälkki
Change-Id: Ib3c973d2e89d4c25c3bf1e52662fbfcb4b1e4355 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15789 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-22cpu/x86/mtrr: correct variable MTRR calculation around 1MiB boundaryAaron Durbin
The fixed MTRRs cover the range [0:1MiB). While calculating the variable MTRR usage the 1MiB boundary is checked such that an excessive number of MTRRs aren't used because of unnatural alignment at the low end of the physical address space. Howevever, those checks weren't inclusive of the 1MiB boundary. As such a variable MTRR could be used for a range which is actually covered by the fixed MTRRs when the end address is equal to 1MiB. Likewise, if the starting address of the range lands on the 1MiB boundary then more variable MTRRs are calculated in order to meet natural alignment requirements. Before: MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0 0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6 0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0 0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1 0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0 0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6 CPU physical address size: 39 bits MTRR: default type WB/UC MTRR counts: 7/17. MTRR: WB selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007ffff00000 type 0 MTRR: 1 base 0x000000007b800000 mask 0x0000007fff800000 type 0 MTRR: 2 base 0x000000007c000000 mask 0x0000007ffc000000 type 0 MTRR: 3 base 0x0000000080000000 mask 0x0000007fe0000000 type 0 MTRR: 4 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0 MTRR: 5 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1 MTRR: 6 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0 After: MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0 0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6 0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0 0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1 0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0 0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6 CPU physical address size: 39 bits MTRR: default type WB/UC MTRR counts: 6/8. MTRR: WB selected as default type. MTRR: 0 base 0x000000007b800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x000000007c000000 mask 0x0000007ffc000000 type 0 MTRR: 2 base 0x0000000080000000 mask 0x0000007fe0000000 type 0 MTRR: 3 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0 MTRR: 4 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1 MTRR: 5 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0 BUG=chrome-os-partner:55504 Change-Id: I7feab38dfe135f5e596c9e67520378a406aa6866 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15780 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-22intel/amenia: Write protect GPIO relative to bank offsetsselvar2
Update the write protect GPIO reported in ACPI to GPIO_75. Also update the controller ID to "INT3452:01" which will point at the goldmont device and includes write protect GPIO. BUG=none BRANCH=none TEST=verify crossystem output for wpsw_cur. Change-Id: Id6b172e289976072836746c1814e0300544a06cb Signed-off-by: sselvar2 <susendra.selvaraj@intel.com> Reviewed-on: https://coreboot.intel.com/7771 Reviewed-by: Sparry, Icarus W <icarus.w.sparry@intel.com> Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com> Tested-by: Petrov, Andrey <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15496 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-22soc/intel/apollolake: Correct the gpio bank irqJagadish Krishnamoorthy
The gpio bank irq is not correct and hence gpio bank handler is never called in case of gpio based irq. Correct the gpio bank irq to enable gpio based irq. BUG=chrome-os-partner:55433 TEST=cat /proc/interrupts | grep INT3452 should output 14. Change-Id: I54253786425b7d4c2007043d49a91dfa6db0397b Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com> Reviewed-on: https://review.coreboot.org/15756 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-22amd/agesa/f16kb: Allow SATA Gen3Fabian Kunkel
YangtzeSataResetService implements the SataSetMaxGen2 double. The value should be only set, if the condition is met. For testing, add FchParams_env->Sata.SataMode.SataSetMaxGen2 = FALSE; to your BiosCallOuts.c, which enables GEN3 for the SATA ports. Patch is tested with bap/e20xx board, Lubuntu 16.04 Kernel 4.4. $ dmesg | grep ahci #before patch ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode $ dmesg | grep ahci #after patch ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode Change-Id: I17a493b876a4be3236736b2116b331e465b159af Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15728 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-22google/reef: Update gpio config for audioSathyanarayana Nujella
This changelist updates gpio config for speaker SDMODE pin. It disables speaker by default. Audio kernel is expected to enable this when audio rendering starts. Change-Id: Id33ad29e637bf1fe6b02e8a4b0fd9e220e8983e7 Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/15433 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-22soc/intel/apollolake: clarify meaning of LPDDR4 density meaningAaron Durbin
The 'dram density' is a misnomer because the memory initialization code treats that input parameter as a per rank density. Therefore, update the variables to further clarify how it's actually being used. BUG=chrome-os-partner:55446 Change-Id: Ie4c944f35b531812205ac0bb1c70f39ac401495e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15773 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-22mainboard/google/reef: indicate dual rank LPDDR4 skusAaron Durbin
The 16Gb devices use two ranks per channel within the DRAM module. However, the density settings are really on a per rank basis so indicate dual rank with a device density of 8Gb. BUG=chrome-os-partner:55446 Change-Id: Ib5dba6f9ed248750d68b726996c71def9b75961e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15772 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-22soc/intel/apollolake: add dual rank option to meminitAaron Durbin
Despite the UPD comments the Chx_RankEnable fields are a bit mask which indicates which ranks are enabled for physical channel. Add the ability to set the rank mask correctly for dual rank LPDDR4 modules. BUG=chrome-os-partner:55446 Change-Id: I9dbed7bb6a4b512e57f6b4481180932a7cce91ff Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15771 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-22soc/intel/apollolake: die() when FSP silicon init failsAaron Durbin
The reset requests are handled in the FSP 2.0 wrapper, but the current code doesn't check any non-successful return values. Provide parity with the memory init path which die()s under those circumstances. Change-Id: I9df61323f742b4e94294321e3ca3ab58a68ca4dd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15766 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-22intel car: Unify postcodesKyösti Mälkki
Not all are matched, but this makes it easier to backport MTRR changes from haswell. Change-Id: Ida5943b1469fc0089a31ff3b18131fb82b0941c6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15760 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-22intel car: Unify whitespace and comment fixesKyösti Mälkki
Change-Id: Icd0cc7d27f38bdaee6addb98abec6f310cdd9fae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15759 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-22intel car: Remove guard on XIP_ROM_SIZEKyösti Mälkki
These guards have been removed starting with model_206ax. Change-Id: Id63034ec4080e37eee2c120aa1f1ef604db5b203 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15758 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-22intel model_106cx: Include CAR from socket directoryKyösti Mälkki
Since the socket layer is implemented with this CPU model, there could potentially be multiple CPU models included. There can be only one cache_as_ram include, so select it directly within the socket directory. Change-Id: Ia52bb152276eddfd1fb33ddb7f5d153ab8e8163c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15757 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-21mainboard/google/reef: handle eMMC power signal polarity changeAaron Durbin
The EVT board uses an active high power control signal while the previous board used an active low signal. Update the tables to reflect the differences. BUG=chrome-os-partner:55470 Change-Id: I198c0e4e019fcffe2cf748d382351ac965a81077 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15763 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-21mainboard/google/reef: reverse the memory config bitsAaron Durbin
I mistakenly assumed the order of the bits matched how one would assign values as they wrote them msb .. lsb. However, the gpio lib doesn't do that. Correct the order so that values are read out correctly. BUG=chrome-os-partner:54949t Change-Id: I5304dfe2ba6f8eb073acab3377327167573ec2cc Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15753 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-21timestamp: Drop duplicate TS_END_ROMSTAGE entriesKyösti Mälkki
This entry gets added in run_ramstage(). Change-Id: I18cda4ead3614c6d07c3269cbee53e6def6408c7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15755 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-21AMD k8 fam10: Fix CAR GLOBALS late in romstageKyösti Mälkki
Zero-filling memory below 1 MiB resets car_migrated variable so any CAR GLOBALs are not addressed correctly for the remaining time in romstage. Also there is no actual need to do this as ramstage loader handles BSS. This fixes regression with commit 70cd54310 that broke fam10 boards with romstage spinlocks enabled. Change-Id: I7418821997a980ae5b818bd57e8a1b6507a543af Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15754 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-07-21soc/intel/apollolake: Add new Intel HD Graphics Device ID's.Abhay Kumar
B stepping onwards we have to support two Graphics Device ID. BUG=chrome-os-partner:55449 Change-Id: I520791ad8573dc5deb6ea1e33e1486f05050438c Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/15767 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-20cbmem: share additional time stamps IDsAntonello Dettori
Split the additional time stamps concerning depthcharge from the cbmem utility sourcecode and move them into commonlib/timestamp_serialized.h header. Change-Id: Ic23c3bc12eac246336b2ba7c7c39eb2673897d5a Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/15725 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-20google/reef: Add wake signal for trackpadFurquan Shaikh
EVT has a wake signal for track pad which is routed to GP_15. BUG=chrome-os-partner:54960 Change-Id: I9a73a3dc74e3bbed63509a3c076ec17a6559da55 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15723 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-20tpm2_tlcl: Use signed integer for tpm2_marshal_command return valueDuncan Laurie
The tpm2_marshal_command() function returns a negative value on error, so we must use a signed type for the return value. This was found by the coverity scan: https://scan.coverity.com/projects/coreboot?tab=overview CID:1357675 CID:1357676 Change-Id: I56d2ce7d52b9b70e43378c13c66b55ac2948f218 Signed-off-by: Duncan Laurie <dlaurie@google.com> Found-by: Coverity Scan Reviewed-on: https://review.coreboot.org/15717 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-07-20soc/intel/quark: Fix legacy GPIO readsLee Leahy
Add missing break to LEG_GPIO_REGS case to return the correct value for legacy GPIO reads. Fixes coverity issue CID 1357460. Found by Coverity, Fixes: * CID 1357460 (#1 of 1): Unused value (UNUSED_VALUE) returned_value: Assigning value from reg_legacy_gpio_read(step->reg) to value here, but that stored value is overwritten before it can be used. value_overwrite: Overwriting previous write to value with value from reg_pcie_afe_read(step->reg). TEST=Build and run on Galileo Gen2. Change-Id: I6c52e8801a32f510ac94276fe0c097850cbfde57 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15732 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-20amd/db-ft3b-lc: Add board supportKyösti Mälkki
Change-Id: Ibab9039306730bfd3063b34cf085e854e4608902 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/14970 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>