| Age | Commit message (Collapse) | Author |
|---|
|
Add a few missing Kconfig defaults for derivatives of the Oak and Gru
baseboards. Also group all Kconfigs that must change for derivatives
together for easier updating.
BRANCH=None
BUG=None
TEST=None
Change-Id: I95ebb08b4f13f09f2539b451d7b96a826ddf98f8
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: ae3f13c1dc323f4c7c4a176a4f5e1285fec312ce
Original-Change-Id: I658130e88daa2d113fd722b0527cf0e7ab66c7ef
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/357922
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15605
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds the support for gpio_tier1_sci_en bit which
needs to be set before going to sleep so that when
gpio_tier1_sci_sts bit gets set platform can wake
from S3.
BUG = chrome-os-partner:53992
TEST = Platform wakes from S3 on lidopen,key press.
Tested on Amenia and Reef boards.
Change-Id: I3ba79fa53ca8817149d585fa795a8f427c128dcb
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15612
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
FSP is currently setting a hard-coded policy for the interrupt
polarity settings. When the mainboard has already set the GPIO
settings up prior to SiliconInit being called that results
in the previous settings being dropped. Work around FSP's
default policy until FSP is fixed.
BUG=chrome-os-partner:54955
Change-Id: Ibbd8c4894d8fbce479aeb73aa775b67df15dae85
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15649
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
For APIC routed gpios, set the corresponding interrupt polarity
for the associated IRQ based on the gpio pad's invert setting.
This allows for the APIC redirection entries to match the hardware
active polarity once the double inversion takes place to meet
apollolake interrupt triggering constraints.
BUG=chrome-os-partner:54955
Change-Id: I69c395b6f861946d4774a4206cf8f5f721c6f5f4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15648
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The interrupt and timer subsystem (ITSS) sits between the APIC
and the other logic blocks. It only supports positive polarity
events, but there's a polarity inversion setting for each IRQ such
that it can pass the signal on to the APIC according to the
expected APIC redirection entry values. This support is needed
in order for the platform/board to set the expected interrupt
polarity into the APIC for gpio signals.
BUG=chrome-os-partner:54955
Change-Id: I50ea1b7c4a7601e760878af515518cc0e808c0d1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15647
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Utilize the new interrupt macros in order to specify correct
polarity of the gpio interupts. Some of the interrupts were
working by catching the opposite edge of the asserted interrupt.
BUG=chrome-os-partner:54977
Change-Id: I55bee2c4363cfdbf340a4d5b3574b34152e0069c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15646
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Utilize the new interrupt macros in order to specify correct
polarity of the gpio interupts. Some of the interrupts were
working by catching the opposite edge of the asserted interrupt.
BUG=chrome-os-partner:54977
Change-Id: Iee33c0a949be0a11147afad8a10a0caf6590ff7b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15645
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Internally, apollolake routes its interrupts as active high.
This includes SCI, SMI, and ACPI. Therefore, provide helper
macros such that the user can describe an interrupt's active
high/low polarity more easily. It helps for readability when
one is comparing gpio configuration next to APIC configuration
in different files. Additionally, the gpio APIC macros always
use a LEVEL trigger in order to let the APIC handle the
filtering of the IRQ on its own end.
BUG=chrome-os-partner:54977
Change-Id: Id8fdcd98f0920936cd2b1a687fd8fa07bce9a614
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15644
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Disable PCIe A0, A1, A2, A3, B1 ports.
Enable B0 port which is used for wifi.
BUG=chrome-os-partner:54288
BRANCH=None
TEST=lspci should show only PCIe B0 device
Change-Id: I266d6eb7ddd56888f6b07b59681c2d9f0a6c0a9e
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Reviewed-on: https://review.coreboot.org/15599
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
FSP1_0 places romstage ram stack at fixed location of
RAMTOP in low memory before returning to coreboot proper.
There is no possibility of making a complete backup of
RAMBASE..RAMTOP region and currently such backup is not
even attempted.
As a conclusion, S3 resume would always cause OS memory
corruption.
Change-Id: I5b9dd4069082e022b01b0d6a9ad5dec28a06e8b0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15576
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For some reason the self loader wasn't clearing segments
marked as BSS type. Other segments which weren't fully
written by the file-backed content were being cleared up
to the indicated memsize. Treat segments marked BSS
similarly by clearing their content.
Change-Id: I9296c11a89455a02e5dd18bba13d4911517c04f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15603
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There were two successive calls to prog_set_area() which
duplicated the same logic. Remove the unnecessary redundancy.
Change-Id: I594577f8e7e78d403e7a5656f78e784e98c2c859
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15602
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The list insertion operations were open coded at each location.
Add helper functions which provide the semantics needed by
the selfboot code in a single place.
Change-Id: Ic757255e01934b499def839131c257bde9d0cc93
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15601
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I195fd3a9c7fc07c35913342d2041e1ffef110466
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15549
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The HTIF is deprecated and the newest RISC-V binutils don't know the
mtohost/mfromhost CSRs anymore.
The SBI implementation still needs to be restructured.
Change-Id: I13f01e45b714f1bd919e27b84aff8db772504b1f
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15289
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This patch sets the devicetree for gpe0_dw configuration
and also configures the GPIO lines for SCI. EC_SCI_GPI
is configured to proper value.
BUG = chrome-os-partner:53438
TEST = Toggle pch_sci_l from ec console using gpioset command
and see that the sci counter increases in /sys/firmware/acpi/interrupt
and also 9 in /proc/interrupt
Change-Id: If258bece12768edb1e612c982514ce95c756c438
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15556
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch sets the devicetree for gpe0_dw configuration
and also configures the GPIO lines for SCI. EC_SCI_GPI
is configured to proper value.
BUG = chrome-os-partner:53438
TEST = Toggle pch_sci_l from ec console using gpioset command
and see that the sci counter increases in /sys/firmware/acpi/interrupt
and also 9 in /proc/interrupt
Change-Id: I3ae9ef7c6a3c8688bcb6cb4c73f5618e7cde342c
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15325
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch adds the handler to enable bit for gpio_tier1_sci_en.
gpio_tier1_sci_en enables the setting of the GPIO_TIER1_SCI_STS
bit to generate a wake event and/or an SCI or SMI#. We are setting
the bit for gpio_tier1_sci_en from the ASL code as OS clears this bit
if set from BIOS. As per ACPI spec _GPE is defined as the Named
Object that evaluates to either an integer or a package. If _GPE
evaluates to an integer, the value is the bit assignment of the SCI
interrupt within the GPEx_STS register of a GPE block described in
the FADT that the embedded controller will trigger. FADT right now
has no mechanism to acheive the same.
Change-Id: I1e1bd3f5c89a5e6bea2d1858569a9d30e6da78fe
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15578
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Properly obtain the top of memory address from the hardware registers
set by FSP.
TEST=Build and run on Galileo Gen2
Change-Id: I7681d32112408b8358b4dad67f8d69581c7dde2e
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15594
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add host bridge register access routines and macros.
TEST=Build and run on Galileo Gen2
Change-Id: I52eb6a68e99533fbb69c0ae1e6d581e4c4fab9d2
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15593
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
CAS latency = 2 support added for DDR2.
Change-Id: I08d72a61c27ff0eab19e500a2f547a5e946de2f0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/15439
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The pull bias settings for GPIO0_A, GPIO0_B, GPIO2_C and GPIO2_D
are different from the other GPIO banks.
This patch adds a callback function to get the GPIO pull value
of each SoC(rk3288 and rk3399) so we can still use the common
GPIO driver.
BRANCH=none
BUG=chrome-os-partner:53251
TEST=Jerry and Gru still boot
Change-Id: I2a00b7ffd2699190582f5f50a1e21b61c500bf4f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 46d5fa7297693216a2da9bcf15ccce4af796e80e
Original-Change-Id: If53f47181bdc235a1ccfefeeb2a77e0eb0e3b1ca
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/358110
Original-Commit-Ready: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15587
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
- Update so that the RAM id is read from ADC instead of
hard-coded from the config array.
- Update the boardid readings so that they are bucketed instead
of within an error margin.
BRANCH=None
BUG=chrome-os-partner:54566,chrome-os-partner:53988
TEST=hexdump /proc/device-tree/firmware/coreboot/ram-code
and boardid when OS boots up. Also verified that
voltage read in debug output returns correct id.
Change-Id: I963406d8c440cd90c3024c814c0de61d35ebe2fd
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 068705a38734d2604f71c8a7b5bf2cc15b0f7045
Original-Change-Id: I1c847558d54a0f7f9427904eeda853074ebb0e2e
Original-Signed-off-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356584
Original-Reviewed-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/15586
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable reading of keyboard recovery host event from coreboot.
BUG=None
BRANCH=None
TEST=esc+refresh+power combo and make sure you
see recovery fw screen.
Change-Id: I166619d6202e23569395434e9dc1adb2a6a53296
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: f9279c8c06abb170589b1b11bf5287fbf38c9905
Original-Change-Id: Id980c77c8d7695b2c1b3343d968ad2a302d42aaa
Original-Signed-off-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/357841
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: https://review.coreboot.org/15585
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable CONFIG_EC_SOFTWARE_SYNC. Crossystem needs this to get ec RW/RO
info.
BUG=chrome-os-partner:54566
BRANCH=None
TEST=1. apreset from ec console. Check for
"VbEcSoftwareSync() check for RW update"
string in ap console.
2. Run "ectool version" from OS to check
that RO/RW version are different and
that we're in RW:
RO version: kevin_v1.1.4818-8243672
RW version: kevin_v1.1.4762-1957187
Firmware copy: RW
3. Run crossystem ecfw_act. check for
RW return value.
Change-Id: If6524f2cca4a6223ab9704d0af827e8c1072670f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0deb0e1c69d6bf21acf7640bf76f9196e14437d7
Original-Change-Id: I0db8235cf7d472f0aa642eea1998282d010d3433
Original-Signed-off-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/357811
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15584
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
coreboot boots from the little core, and doesn't use the big core for
now, but if apll_b is set to the default 24MHz, it will take a long time
to enable the big core. This will cause a watchdog crash, so apll_b
initialization to 600MHz needs to be done in coreboot.
BRANCH=none
BUG=chrome-os-partner:54817
TEST=Pick CL:353762 and see big CPU clocks look right
TEST=Boot from Gru and see no cpufreq warnings
Change-Id: Ie45cd2271555942e4321e9a9e523dc10f63d8107
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id:
Original-Change-Id: I20b8b591db3171e27740d85edce11f9e8797d849
Original-Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Original-Commit-Id: 16bc916174042620bebe19ae73d241002491aecc
Original-Original-Change-Id: Id3487138b383b6643ba7e3ce1eae501a6622da10
Original-Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Original-Reviewed-on: https://chromium-review.googlesource.com/356399
Original-Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15583
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Use the apll define instead of the apll_l define so it can be reused
when setting apll_b.
BRANCH=None
BUG=None
TEST=Boot from Gru
Change-Id: Iebc4ce3b66a86c33653292340b9855265ac4fc07
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: eb578110d19a35ef04f8749fdc202055abd50fd1
Original-Change-Id: I63966e98af48eaf49837eb0b781eea001a376ef4
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/356398
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Tested-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/15582
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch adds a TPM2 specific path in the vboot2 initialization
sequence when the device is turned on in the factory for the first
time, namely two secure NVRAM spaces are created, with different
access privileges.
The higher privilege space can be modified only be the RO firmware,
and the lower privilege space can be modified by both RO and RW
firmware.
The API is being modified to hide the TPM implementation details from
the caller.
Some functions previously exported as global are in fact not used
anywhere else, they are being defined static.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=when this code is enabled the two secure spaces are successfully
created during factory initialization.
Original-Commit-Id: 5f082d6a9b095c3efc283b7a49eac9b4f2bcb6ec
Original-Change-Id: I917b2f74dfdbd214d7f651ce3d4b80f4a18def20
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353916
Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org>
squashed:
mock tpm: drop unused functions
safe_write() and safe_define_space() functions are defined in
secdata_mock.c, but not used in mocked TPM mode.
The actual functions have been redefined as static recently and their
declarations were removed from src/include/antirollback.h, which now
causes compilation problems when CONFIG_VBOOT2_MOCK_SECDATA is
defined.
Dropping the functions from secdata_mock.c solves the problem.
BRANCH=none
BUG=none
TEST=compilation in mock secdata mode does not fail any more.
Original-Commit-Id: c6d7824f52534ecd3b02172cb9078f03e318cb2b
Original-Change-Id: Ia781ce99630d759469d2bded40952ed21830e611
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356291
Original-Tested-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Change-Id: Icb686c5f9129067eb4bb3ea10bbb85a075b29955
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15571
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Currently aclkm pclkdbg atclk clocks use apll_l as a parent, but the
apll_l frequency may change in firmware, so we need to caculate the div
value based on the apll_l frequency.
BRANCH=None
BUG=chrome-os-partner:54376
TEST=Boot from Gru
Change-Id: I2bd8886168453ce98efec58b5490c2430762769b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 116ae863a504630e2aff056564836d84198fcae2
Original-Change-Id: I7e3a5d9e3f608ddf15592d893117c92767fcd015
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356397
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15581
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Cleans up the comments in sdram.c to make them consistent.
BRANCH=none
BUG=none
TEST=make sure gru/kevin build and boot
also, run "stressapptest -M 1024 -s 3600" to make sure it passes
Change-Id: I1daf72b847374d549389bacd2fa0a9f8f231b190
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 63a224d6f4b0e4d13bc372c05c4b9196895d553f
Original-Change-Id: Iaf8a32cfe2b22c4ccff71952f90d162ad8c2d3e7
Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355665
Original-Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15579
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Some devices allow to retrieve firmware version by reading the same 4
byte register repeatedly until the entire version string is read.
Let's print out TPM firmware version when available. Just in case
something goes wrong limit the version string length to 200 bytes.
CQ-DEPEND=CL:355701
BRANCH=none
BUG=chrome-os-partner:54723
TEST=built the new firmware and ran it on Gru, observed the following
in the coreboot console log:
Connected to device vid:did:rid of 1ae0:0028:00
Firmware version: cr50_v1.1.4792-7a44484
Original-Commit-Id: 1f54a30cebe808abf1b09478b47924bb722a0ca6
Original-Change-Id: Idb069dabb80d34a0efdf04c3c40a42ab0c8a3f94
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355704
Original-Reviewed-by: Scott Collyer <scollyer@chromium.org>
Squashed with:
tpm: use 4 byte quantities when retrieving firmware version
The CR50 device is capable of reporting its firmware version in 4 byte
quantities, but the recently introduced code retrieves the version one
byte at a time.
With this fix the version is retrieved in 4 byte chunks.
BRANCH=none
BUG=none
TEST=the version is still reported properly, as reported by the AP
firmware console log:
localhost ~ # grep cr50 /sys/firmware/log
Firmware version: cr50_v1.1.4804-c64cf24
localhost ~ #
Original-Commit-Id: 3111537e7b66d8507b6608ef665e4cde76403818
Original-Change-Id: I04116881a30001e35e989e51ec1567263f9149a6
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/356542
Original-Reviewed-by: Andrey Pronin <apronin@chromium.org>
Change-Id: Ia9f13a5bf1c34292b866f57c0d14470fe6ca9853
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15573
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Reusing the LED patterns as it was defined for Storm/WW/Platform.
BUG=b:29051518
TEST=After about 3 seconds of powering on the device different colors
should be seen at the LED ring, depending on the state of the device.
Alternatively, move the device to different states manually by
appropriate actions (like dev mode, rec mode etc) and observe the
colors.
BRANCH=None
Change-Id: I6f1b23fee15747a402e209a2d06f8794bbc2c5a1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: be1194b095d9a5cf269710c43a27a5afb3e87b29
Original-Change-Id: Ie82d4e148025c0040cdb26f53f028d9b4cbe2332
Original-Signed-off-by: Suresh Rajashekara <sureshraj@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/355200
Original-Commit-Ready: Suresh Rajashekara <sureshraj@chromium.org>
Original-Tested-by: Suresh Rajashekara <sureshraj@chromium.org>
Original-Reviewed-by: Suresh Rajashekara <sureshraj@chromium.org>
Reviewed-on: https://review.coreboot.org/15572
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
TPM commands need to be serialized (marshaled) to be sent to the
device, and the responses need to be de-serialized (unmarshaled) to be
properly interpreted by upper layers.
This layer does not exist in TPM1.2 coreboot implementation, all TPM
commands used there were hardcoded as binary arrays. Availability of
the marshaling/unmarshaling layer makes it much easier to add new TPM
commands to the code.
Command and response structures used in these functions are defined in
Parts 2 and 3 of the TCG issued document
Trusted Platform Module Library
Family "2.0"
Level 00 Revision 01.16
October 30, 2014
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied it is possible to
successfully initialize firmware and kernel TPM spaces.
Change-Id: I80b3f971e347bb30ea08f820ec3dd27e1656c060
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 0782d9d452efb732e85d1503fccfcb4bf9f69a68
Original-Change-Id: I202276ef9a43c28b5f304f901ac5b91048878b76
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353915
Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Original-Reviewed-by: Darren Krahn <dkrahn@chromium.org>
Reviewed-on: https://review.coreboot.org/15570
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
This is the first approximation of implementing TPM2 support in
coreboot. It is very clearly incomplete, some of the larger missing
pieces being:
- PCR(s) modification
- protection NVRAM spaces from unauthorized deletion/modification.
- resume handling
- cr50 specific factory initialization
The existing TPM1.2 firmware API is being implemented for TPM2. Some
functions are not required at all, some do not map fully, but the API
is not yet being changed, many functions are just stubs.
An addition to the API is the new tlcl_define_space() function. It
abstracts TMP internals allowing the caller to specify the privilege
level of the space to be defined. Two privilege levels are defined,
higher for the RO firmware and lower for RW firmware, they determine
who can write into the spaces.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied Kevin/Gru devices can
initialize and use firmware and kernel spaces
Change-Id: Ife3301cf161ce38d61f11e4b60f1b43cab9a4eba
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: bcc8e62604c705798ca106e7995a0960b92b3f35
Original-Change-Id: Ib340fa8e7db51c10e5080973c16a19b0ebbb61e6
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/353914
Original-Commit-Ready: Martin Roth <martinroth@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15569
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
The "PC Client Protection Profile for TPM 2.0" document defines SPI
bus addresses for different localities. That definition is not honored
in the cr50 implementation, this patch fixes it: locality zero
register file is based off 0xd40000.
BRANCH=none
BUG=chrome-os-partner:54720
TEST=with the fixed cr50 image and the rest of TPM2 initialization
patches applied factory initialization sequence on Gru succeeds.
Change-Id: I49b7ed55f0360448b9a6602ebd31a3a531608da3
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 43344fff5d58ec235e50030413fc38c98dd0a9a1
Original-Change-Id: I2de6fa6c05d3eca989d6785228d5adde1f2a7ab7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/355620
Original-Reviewed-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-on: https://review.coreboot.org/15568
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
Change-Id: I2c49d68ea9a8f52737b6064bc4fa703bdb1af1df
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15463
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If CAR migration operations unintentionally set the lock,
BSP would have got stuck on printk() calls above already.
Change-Id: I35155ebcb00475a0964fc639ee74ad2755127740
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15589
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
The lock stores need to migrate from CAR to CBMEM.
Change-Id: I3cffd14bdfc57d5588d0f24afe00e0f9891bfe5a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15588
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It is not possible for cbmem_add() to complete succesfully before
cbmem_recovery() is called. Adding more tables on S3 resume path
is also not possible.
Change-Id: Ic14857eeef2932562acee4a36f59c22ff4ca1a84
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15472
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In particular, update host_event the original value for MKBP was not
set in ToT.
CQ-DEPEND=CL:353634
BUG=b:27849483
BRANCH=none
TEST=Compile on Samus. Tested in Cyan branch.
Change-Id: I0184e4f0e45c3321742d3138ae0178c159cbdd0a
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: cc6750b705300f5b94bf23fe5485d6e7a5f9e327
Original-Change-Id: I60df65bfd4053207fa90b1c2a8609eec09f3c475
Original-Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/354040
Reviewed-on: https://review.coreboot.org/15567
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This is needed to ensure that the ram-code node is included in the
device tree by depthcharge.
BRANCH=none
BUG=chrome-os-partner:54566
TEST=built updated firmware, booted on kevin into Linux shell, checked
the device tree contents:
localhost ~ # od -tx1 /proc/device-tree/firmware/coreboot/ram-code
0000000 00 00 00 01
0000004
localhost #
Change-Id: Ibe96e3bc8fc0106013241738f5726783d74bd78b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 53c002114f7044b88728c9e17150cd3a2cf1f80f
Original-Change-Id: Iba573fba9f9b88b87867c6963e48215e254319ed
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/354705
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15566
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Previously, any 800MHz DIMMs were being slowed to 667MHz
for no reason other than there was a bug in the maximum
frequency detection code for the MCH.
Change-Id: Id6c6c88c4a40631f6caf52f536a939a43cb3faf1
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/15257
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Specify the memory initialization parameters in
mainboard/intel/galileo/devicetree.cb. Pass these values into FSP to
initialize memory.
TEST=Build and run on Galileo Gen2
Change-Id: I83ee196f5fb825118a3a74b61f73f3728a1a1dc6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15260
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Switch the I2C scripts to properly match the I2C address selection for
the Galileo Gen1 board.
TEST=Build an run on Galileo Gen1
Change-Id: I9fc8b59a3a719abb474c99a83e0d538794626da9
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15258
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Remove the unused Kconfig values which specify the PDAT file, its
location and inclusion into the coreboot file system. Remove the code
in romstage which locates the pdat.bin file.
TEST=Build and run on Galileo Gen2
Change-Id: I397aa22ada6c073c60485a735d6e2cb42bfd40ab
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15205
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add the gpio_defs.h reference in chip.h to enable
reef and amenia devicetree.cb to use the definitions from gpio_defs.h.
Change-Id: I333d4e810e42309ac76dd90c19f05cf3e3a517b1
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15550
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use the device driver for DA7219 device configuration in the SSDT and
remove the static copy in the DSDT.
Tested on reef to ensure that the generated SSDT contents are
equivalent to the current DSDT contents.
Change-Id: I288eb05d0cb3f5310c4dca4aa1eab5a029f216af
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15539
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a device driver to generate the device and required properties
into the SSDT.
This driver uses the ACPI Device Property interface to generate the
required parameters into the _DSD table format expected by the kernel.
This was tested on the reef mainboard to ensure that the SSDT contained
the equivalent parameters that are provided by the current DSDT object.
Change-Id: Ia809e953932a7e127352a7ef193974d95e511565
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15538
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There is a second ACPI _DSD document from the UEFI Forum that details
how _DSD style tables can be nested, creating a tree of similarly
formatted tables. This document is linked from acpi_device.h.
In order to support this the device property interface needs to be
more flexible and build up a tree of properties to write all entries
at once instead of writing each entry as it is generated.
In the end this is a more flexible solution that can support drivers
that need child tables like the DA7219 codec, while only requiring
minor changes to the existing drivers that use the device property
interface.
This was tested on reef (apollolake) and chell (skylake) boards to
ensure that there was no change in the generated SSDT AML.
Change-Id: Ia22e3a5fd3982ffa7c324bee1a8d190d49f853dd
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15537
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Adds Maxim98357a support for reef using the generic driver
in drivers/generic/max98357
Change-Id: I333d4e810e42309ac76dd90c19f05cf3e3a517e0
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15435
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
IRQ 9 is used for different purpose on this board so move
SCI away to IRQ10.
Change-Id: I107bfb5ec8cd05f844ee75550779be7746e77a88
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15563
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Based on the board revision apply the correct GPIO changes.
The only differences are the addition of 2 peripheral wake signals
and a dedicated peripheral reset line.
BUG=chrome-os-partner:54959,chrome-os-partner:54960,chrome-os-partner:54961
BRANCH=None
TEST=Built and tested on reef.
Change-Id: I9cac82158e70e0af1b454ec4581c2e4622b95b4b
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15562
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The board build version is provided by the EC on reef.
Provide the necessary functional support for coreboot
to differentiate the board versions.
BUG=chrome-os-partner:54959,chrome-os-partner:54960,chrome-os-partner:54961
BRANCH=None
TEST=Built and tested on reef.
Change-Id: I1b7e8b2f4142753cde736148ca9495bcc625f318
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15561
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
While the proto boards didn't have a memory SKU notion the
EVT boards do. Therefore, provide support for selecting the
proper memory SKU information based on the memory id straps.
This works on EVT boards because the pins used for the
strapping weren't used on proto. However, internal pullups
need to be enabled so that proto boards read the correct
id.
BUG=chrome-os-partner:54949
BRANCH=None
TEST=Built and used on reef for memory config.
Change-Id: I8653260e5d1b9adc83b78ea2770c683b72535e11
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15560
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of having all the mainboards put similar logic
into their own code provide common mechanism for memory
SKU selection. A function, meminit_lpddr4_by_sku(), is
added that selects the proper configuration based on the
SKU id and configuration passed in. LPDDR4 speed as well
as DRAM device density configuration is associated for
each logical channel per SKU id.
BUG=chrome-os-partner:54949
BRANCH=None
TEST=Built and used on reef for memory config.
Change-Id: Ifc6a734040bb61a58bc3d4c128a6420a71245c6c
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15559
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The internal pulls for gpio_input_pullup() and gpio_input_pulldown()
were using fairly strong pulls. Weaken them so that external pulls
can override the internal ones. This matches the current assumptions
of lib/gpio.c.
BUG=chrome-os-partner:54949
BRANCH=None
TEST=Built and used on reef for memory config.
Change-Id: Ifda1d04d40141325f78db277eb0bd55574994abf
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15558
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Provide common implementations for gpio_base2_value() variants
which configure the gpio for internal pullups and pulldowns.
BUG=chrome-os-partner:54949
BRANCH=None
TEST=Built and used on reef for memory config.
Change-Id: I9be8813328e99d28eb4145501450caab25d51f37
Signed-off-by: Aaron Durbin <adurbin@chromuim.org>
Reviewed-on: https://review.coreboot.org/15557
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Have acpigen_write_package() return a pointer to the package element
counter so it can be used for dynamic package generation where needed.
Change-Id: Id7f6dd03511069211ba3ee3eb29a6ca1742de847
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15536
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The name must not terminated with a newline character `\n` as it would
make it hard to use it strings. So, remove the newline from the two SoCs
with it.
Change-Id: I7570442b38a455e7c497d7f461c208fb0a88296d
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/15540
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I6d51f46240c62fcd6089411e8681e0b6e7d5bfe4
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/15222
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I3cffe9d832edbbea79cabca639d9d920b7ffcf9a
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/8178
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
A call to early_mainboard_init is already present in verstage, thus it
is only necessary to call it from romstage when not in vboot context.
Change-Id: I2e0b5a369c5fb24efae4ac40d83a31f5cf4a078d
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15450
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This includes the proper Kconfig options (based on the chromium os
coreboot configuration) for setting up verstage on tegra124 devices.
Change-Id: I4a1976ff684a417cae6fa718ef53cad763cee47d
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15451
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Reading cpuid leaf 0 is incorrect for testing cpu family.
Use leaf 1 instead. See Intel SDM 2a Table 3-17.
Change-Id: Ib2c95cdd1fb93db06a08ecd7266f6b88700caf83
Signed-off-by: Ryan Salsamendi <rsalsamendi@hotmail.com>
Reviewed-on: https://review.coreboot.org/15346
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
This setting will enable S0ix for LPSS
Change-Id: Ie07cb8437d0cee61a03638aa980fd3322fef0c4e
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15056
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Since SPI controller opcode registers are locked by FSP, they need to be
initialized to a known good state before ReadyToBoot event and after
every SPI flash access (e.g. for MRC cache) has been finished in order
to enable the OS to use SPI controller without constraints.
Change-Id: I0a66344cd44e036c3999ae98d539072299cf5112
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15547
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The SCI interrupt can be routed to different IRQs using ACPI control
register. Instead of using hard coded IRQ9 for ACPI table generation
read back the register and return the used IRQ number. This way SCI IRQ
can be modified (e.g. for a given mainboard) and ACPI tables will
remain consistent.
Change-Id: I534fc69eb1df28cd8d733d1ac6b2081d2dcf7511
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15548
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: York Yang <york.yang@intel.com>
|
|
Enable NC FPGA driver for this mainboard.
Change-Id: I87b6b10038f3d161a25b2008b7ea44b5627cca43
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15545
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add driver code to initialize Siemens NC FPGA as PCI device.
Beside some glue logic it contains a FAN controller and
temperature monitor.
Change-Id: I2cb722a60081028ee5a8251f51125f12ed38d824
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15543
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There are several different macros available to convert a PCI device and
function to a single 8 bit value. One is PCI_DEVFN and is defined in
device/pci_def.h. The other is DEV_FUNC and is defined in several intel
fsp based chipset implementations. In fsp_broadwell_de DEV_FUNC is even
used without being defined at all. This patch unifies the situation so
that only PCI_DEVFN is used.
Change-Id: Ia1c6d7f3683badc66d15053846936d88aa836632
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15546
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Enable the usage of DRIVER_INTEL_I210 and provide a function to search
for a valid MAC address for all i210 devices using hwilib.
Change-Id: Ic0f4f1579364cf5b0111334a05a8a0926785318b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15517
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The function mainboard_get_mac_address() is used to get a MAC address
for a given i210 PCI device. Instead of passing pure numbers for PCI
bus, device and function pass the device pointer to this function. In
this way the function can retrieve the needed values itself as well as
have the pointer to the device tree so that PCI path can be evaluated
there.
Change-Id: I2335d995651baa5e23a0448f5f32310dcd394f9b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15516
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ib7aa1d1b32adcb541a155b8ba2ee011cb5bcf784
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15055
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This patch adds the basic framework for SCI to GPE routing code.
BUG = chrome-os-partner:53438
TEST = Toogle pch_sci_l from ec console using gpioset command and
see that the sci counter increases in /sys/firmware/acpi/interrupt
and also 9 in /proc/interrupts.
Change-Id: I3b3198276530bf6513d94e9bea02ab9751212adf
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15324
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
On Apollolake CSE can be used to fetch firmware from boot media. However,
when this feature is not used, CSE needs to be explicitly notified of it
before memory training is complete. This way it can transition to next
state.
BUG=chrome-os-partner:53876
TEST=CSE can be power-gated during S0iX. Confirmed with LTB.
Change-Id: I5141bff350b6c0bb662424b7b709f0787ec5fd28
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15494
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add DA7219 support in acpi.
DA7219 has advanced accessory detection functionality.
Also add DA7219's AAD as a ACPI data node.
Change-Id: I979275cb2ab1e593ff1e5d360bea83b843e45032
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-on: https://review.coreboot.org/15436
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the Audio DSP device for apollolake as a PCI driver with a static
scan_bus handler so generic devices can be declared under it.
This is for devices like the Maxim 98357A which is connected on the
I2S bus for data but has no control channel bus and instead just has
a GPIO for channel selection and power down control and needs to
describe that GPIO connection to the OS via ACPI.
Change-Id: Icb97ccf7d6a9034877614d49166bc9e4fe659b12
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Reviewed-on: https://review.coreboot.org/15528
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The P2SB device is device 0xd and function 0. If hidden that
causes the latter pci devices on function >= 1 to not be probed
in the kernel. This is also a problem for coreboot if the P2SB
device is hidden by FSP. That means the coreboot driver won't
be ran. Therefore, provide hide and unhide functions for the
P2SB device.
The other quirk is to allow the GPIO devices to work correctly.
Those devices are ACPI devices. However, their resources are
sub-regions within the P2SB BAR. Sadly, linux doesn't handle
ACPI devices being children of PCI devices. This leads to resource
conflict errors when the P2SB device is visible. For the
time being keep the P2SB device hidden, but also ensure the
resources it is using are accounted for and reserved. The fallout
of that is the PMC and SPI device are no longer probed by the
kernel.
BUG=chrome-os-partner:53017
TEST=Ensured P2SB device is visible and pci resources are allocated
correctly for the devices.
Change-Id: I24e59bbde74310e1ce8425b344a3ad0b88702153
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15530
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Correct the GPP PCIe lane number comments so that they match the code.
Change-Id: If27c6a55ebedb0927dd9e8c7c9a833194e129a25
Signed-off-by: Derek Waldner <derek.waldner.os@gmail.com>
Reviewed-on: https://review.coreboot.org/15095
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Have the different acpi_device_ path functions use a different static
buffer so they can be called interchangeably.
Change-Id: I270a80f66880861d5847bd586a16a73f8f1e2511
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15521
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add the function defined in gpio.h to translate a gpio_t into a
value for use in an ACPI GPIO pin table.
For skylake this just returns the gpio_t value as the pins are
translated directly and they are all in the same ACPI device.
Change-Id: I00fad1cafec2f2d63dce9f7779063be0532649c7
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15520
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The upstream kernel driver is not using the of-style naming for
sdmode-gpio so remove the maxim prefix, and remove the duplicate
entry for the sdmode-delay value as well.
Also fix the usage of the path variable, since the device path uses
a static variable it can't be assigned that early or it will be
overwritten by later calls.
This results in the following output for the _DSD when tested on
reef mainboard:
Name (_DSD, Package (0x02)
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301")
Package (0x02)
{
Package (0x02)
{
"sdmode-gpio",
Package (0x04)
{
\_SB.PCI0.HDAS.MAXM,
Zero,
Zero,
Zero
}
},
Package (0x02)
{
"sdmode-delay",
Zero
}
}
})
Change-Id: Iab33182a5f64c89151966f5e79f4f7c30840c46f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15514
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There are four GPIO communities in this SOC and they are implemented
as separate ACPI devices. This means the pin number that is used in
an ACPI GPIO declaration needs to be relative to the community that
the pin resides in. Also select GENERIC_GPIO_LIB in the SOC Kconfig
so this function actually gets used.
This was tested on the reef mainboard by verifying the output of the
SSDT for the Maxim 98357A codec that the assigned GPIO_76 is listed
as pin 0x24 which is the value relative to the Northwest community.
Change-Id: Iad2ab8eccf4c91185a075ffce8d41c81f06c1113
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15513
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Add a function for an SOC to define that will allow it to map the
SOC-specific gpio_t value into an appropriate ACPI pin. The exact
behavior depends on the GPIO implementation in the SOC, but it can
be used to provide a pin number that is relative to the community or
bank that a GPIO resides in.
Change-Id: Icb97ccf7d6a9034877614d49166bc9e4fe659bcf
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15512
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instantiate the touchpad using the drivers/i2c/generic device driver
to generate the ACPI object in the SSDT.
There is not currently a separate wake pin for this device, this will
be added in EVT hardware.
This was tested on the reef board by ensuring that the touchpad device
continues to work in the OS.
Also remove the LPC TPM from the DSDT as it is not present.
Change-Id: I3151a28f628e66f63033398d6fab9fd8f5dfc37b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15481
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Support the I2C interfaces on this SOC using the Intel common lpss_i2c
driver. The controllers are supported in pre-ram environments by
setting a temporary base address in bootblock and in ramstage using
the naturally enumerated base address.
The base speed of this controller is 133MHz and the SCL/SDA timing
values that are reported to the OS are calculated using that clock.
This was tested on a google/reef board doing I2C transactions to the
trackpad both in verstage and in ramstage.
Change-Id: I0a9d62cd1007caa95cdf4754f30c30aaff9f78f9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15480
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add support for the soc_acpi_name() handler in the device operations
structure to translate a device path into ACPI name.
In order to make this more complete add some missing devices in
include/soc/pci_devs.h.
Change-Id: I517bc86d8d9fe70bfa0fc4eb3828681887239587
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15479
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
That function is no longer used. All users have been updated to
use the ulzman() function which specifies lengths for the input
and output buffers.
Change-Id: Ie630172be914a88ace010ec3ff4ff97da414cb5e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15526
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I22441ee0d19aa1b2e2f40278ce30092c86e0adc9
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15522
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Boards broken with commit:
062ef1c AGESA boards: Split dispatcher to romstage and ramstage
Boot failure with asus/f2a85-m witnessed around MemMS3Save() call,
message "Save memory S3 data in heap" in verbose agesa logs was
replaced by a system reset.
Default stubs for MemS3ResumeConstructNBBlock() returned TRUE
without initializing the block contents. This would not work for case
with multiple NB support built into same firmware.
MemMCreateS3NbBlock() then returned with S3NBPtr!=NULL with uninitialized
data and MemMContextSave() referenced those as invalid pointers.
There is no reason to prevent booting in the case S3 resume data is not
passed to ramstage, so remove the ASSERT(). It only affects builds with
IDSOPT_IDS_ENABLED=TRUE anyways.
Change-Id: I8fd1e308ceab2b6f4b4c90f0f712934c2918d92d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15344
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Have the Skylake SOC generate ACPI timing values for the enabled I2C
controllers instead of passing it in the DSDT with static timings.
The timing values are generated from the controller clock speed and
are more accurate than the hardcoded values that were in the ASL which
were originally copied from Broadwell where the controller is running
at a different clock speed...
Additionally it is now possible for a board to override the values
using devicetree.cb. If zero is passed in for SCL HCNT or LCNT then
the kernel will generate its own timing using the same forumla, but if
the SDA hold time value is zero the kernel will NOT generate a correct
value and the SDA hold time may be incorrect.
This was tested on the Chell platform to ensure all the I2C devices on
the board are still operational with these new timing values.
Change-Id: I4feb3df9e083592792f8fadd7105e081a984a906
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15291
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Configure GPIO_199 and GPIO_200 as NF2 to work as HPD.
Change-Id: If3aa6b75ed22c221cfbedaecf16035cdd9939387
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Reviewed-on: https://review.coreboot.org/15447
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add ACPI NHLT table generation that the current hardware
supports.
Reef supports two audio codecs, Dialog 7219 for headsets
and Maxim 98357 for speakers.
Change-Id: Ie39947960c86b8f65140834e31f9ed9f1b578485
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/15440
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add ACPI NHLT table generation that the current hardware
supports as well select the hardware used on the board.
Amenia has support for two audio codecs, Dialog for
headsets and Maxim for speakers.
Change-Id: Iaba9ec81ffb4f128f2e4413dec5174d9ecb856c9
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Reviewed-on: https://review.coreboot.org/15024
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide the initial NHLT support for the following hardware:
1. 2 channel digital microphone array
2. Dialog 7219 headset
3. Maxim 98357 speaker amplifiers.
The code utilizes the Intel SoC common NHLT support.
Change-Id: Ic31e834a08f29c66512a7a63ad7bb35e0374e86a
Signed-off-by: Saurabh Satija <saurabh.satija@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15504
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
The nvs.h header is the one which defines global_nvs_t proper.
Don't rely on an indirect inclusion.
Change-Id: I89d6a73f65e408c73f068b4a35b5efd361a6e5d3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15503
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Every other platform has global_nvs_t as a typedef. For some
reason apollolake didn't bother following current conventions.
Fix this omission to allow for better code sharing and consistency.
Change-Id: Id596eed517737759a64ce803c89ea2a05cbe2cce
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15502
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
If read_vbnv finds that the vbnv_copy is not valid, it initializes it
with the correct HEADER_SIGNATURE and other attributes. However, the
vbnv copy is checked for validity and initialized at the vboot layer as
well. Since, vboot is the owner of this data, it should be the one
initializing it. Thus, if read_vbnv sees that the data is not valid,
simply reset it to all 0s and let vboot layer take care of it. This also
removes the need for additional checks to ensure that the dirty vbnv
copy is properly updated on storage.
Change-Id: I6101ac41f31f720a6e357c9c56e571d62e0f2f47
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15498
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch exposes a function to read pmc bar.
PMC bar is read in function read_pmc_mmio_bar which
is defined static in file pmutil.c. This patch exposes
that functionality to call it from other files.
BUG=chrome-os-partner:53438
TEST= Read the PMC bar value properly from outside
pmutil file.
Change-Id: I26ee13e6ab95d3a8991c7f8ea4b3856ceb015d10
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/15460
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If there is an external 16550 like UART, one needs to enable
the appropriate address ranges before console_init() is called
so that the init sequence can reach the external UART. Otherwise
the UART will only start working in ramstage and will produce
unreadable characters in romstage due to the lack of initialization.
Tested-on: Siemens MC_BDX1
Change-Id: Iafc5b5b6df14916c5ed778928521d4a8f539cf46
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15495
Tested-by: build bot (Jenkins)
Reviewed-by: York Yang <york.yang@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
