summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Collapse)Author
2017-05-02amd/pi/hudson: Add config option for ACPI baseMarc Jones
Add a configuration option to assign the binaryPI base address for the ACPI registers. The binaryPI's assignment is determine at build time and no run-time configuration is allowed. Change-Id: Ida17022abfa6faceb0653c2cb87aacce4facef09 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19485 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-01nb/intel/sandybridge/gma: Set up OpRegion in nb codePatrick Rudolph
Set up IGD OpRegion in northbridge and fill in GNVS' aslb. At this point GNVS already has been set up by SSDT injection. Required for future VBT patches that will: * Use ACPI memory instead of CBMEM * Use common implementation to locate VBT * Fill in platform specific values Change-Id: I97c3402ac055991350732e55b0dda042b426c080 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19310 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-01nb/intel/nehalem/gma: Set up OpRegion in nb codePatrick Rudolph
Set up IGD OpRegion in northbridge and fill in GNVS' aslb. At this point GNVS already has been set up by SSDT injection. Required for future VBT patches that will: * Use ACPI memory instead of CBMEM * Use common implementation to locate VBT * Fill in platform specific values Change-Id: I76b31fe5fd19b50b82f57748558fb04408e0fd23 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19309 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-01nb/intel/fsp_sandybridge/gma: Set up OpRegion in nb codePatrick Rudolph
Set up IGD OpRegion in northbridge and fill in GNVS' aslb. At this point GNVS already has been set up by SSDT injection. Required for future VBT patches that will: * Use ACPI memory instead of CBMEM * Use common implementation to locate VBT * Fill in platform specific values Change-Id: Ie5d93117ee8bd8d15085aedbfa7358dfcf5f0045 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19307 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-28sb/nvidia/mcp55: Link early_ctrl.cArthur Heymans
Change-Id: I3a55c2e8077fdb10768df287f38efcd5e2e64bdf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19365 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-04-27amd/pi/hudson: Add VBNV cmos reset optionMarc Jones
If the mainboard supports VBNV, call init_vbnv_cmos() instead of the normal init_cmos(). The VBNV version does some VBNV pre and post setup around the normal init_cmos(). Change-Id: I34b02409019b945cd68c830e006e99338643f29c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19399 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-27i82801gx: Enable PCI-to-PCI bridgeKyösti Mälkki
Once the PCI command register is written the bridge forwards future IO and memory regions, as programmed in the respective base and limit registers, to the secondary PCI bus. Since the LPC function claims the resources for IOAPIC, ROM and low IO (0x0-0xfff) in its read_resources() call, the PCI-to-PCI configuration will not overlap those regions and does not hide the resources mentioned in the original comment. The bridge was disable in the following commit [1] commit a8e1168064b34b46494b58480411a11bc98340f6 Author: Stefan Reinauer <stepan@coresystems.de> Date: Wed Mar 11 14:54:18 2009 +0000 This patch contains some significant updates to the i82801gx component and will be required for a series of later patches. Roughly it contains: but unfortunately it was not noted which system this caused problems with. [1] http://review.coreboot.org/gitweb?p=coreboot.git;a=commit;h=a8e1168064b34b46494b58480411a11bc98340f6 Change-Id: I75128d83a344f4a0e09a3ea623c7f92a016ebfb9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/2706 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-27nb/amd/amdk8: Link raminit_f.cArthur Heymans
For this debug.c needs to be linked too. Change-Id: I9cd1ffff2c39021693fe1d5d3f90ec5f70891f57 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19030 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-27Revert "amd/pi/hudson: Move ACPI IO registers"Kyösti Mälkki
This reverts commit e7394ca90366d35ac52416c21052a3ceb459dc81. Configuration register for ACPI PM base address is initially configured inside the PI blob. Therefore, the value of HUDSON_ACPI_IO_BASE needs to be the same as DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS used in the build of binaryPI blob. Change-Id: I36700e49e21cc675e8e22b06efffb40e9c1e4236 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19454 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins)
2017-04-26amd/pi/hudson: Add TPM decode to SPI functionMarc Jones
Add a function to send the TPM decode to the SPI interface. Enables use of SPI TPMs on Hudson mainboards. Change-Id: I0e85ed92163e38eca6a55456708ab322d6a90d4c Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19402 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-26amd/pi/hudson: Clean up whitespace in header filesMarshall Dawson
Change spaces to tabs and do general whitespace cleanup. Change-Id: I4a4ecd42f91c9c6015a4f065b7386b17523ac6d9 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19401 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-04-26amd/pi/hudson: Move ACPI IO registersMarc Jones
Move the ACPI IO registers from 0x800 to 0x600 to avoid the IO space required by the Google EC, also at 0x800. This shouldn't have any conflicts on other AMD systems. Change-Id: Iac7388c15e899277fd506fb37965164488358335 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19171 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-26amd/pi/hudson: Add LPC IO decode enable functionMarc Jones
Add a function to enable LPC IO decode AKA WideIO. This can enable up to 3 regions, which may be 512 or 16 bytes wide. Change-Id: I2bed3a99180188101e00b4431d634227e488cbda Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19160 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-25amd/pi/hudson: Add GPIO get functionMarc Jones
Add a basic GPIO get function. Note that GPIO set, ACPI/GPE, and other features should come in future commits. Future changes to be modeled on the other soc/ gpio functions. Change-Id: I8f681865715ab947b525320a6f9fc63af1334b59 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19159 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-17[nb|sb]/amd/[amdfam10|sb700]: Add LPC bridge ACPI names for NB/SBTimothy Pearson
Adds the necessary plumbing for acpi_device_path() to find the LPC bridge on the AMD Family10h/15h northbridges and SB700 southbridge. This is necessary for TPM support since the acpi path to the LPC bridge doesn't match the built-in default in tpm.c This is a port of GIT hash d8a2c1fb by Tobias Diedrich. BUG=https://ticket.coreboot.org/issues/102 Change-Id: I1c514e335e194b2864599e5419cfaee830b94e38 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/19282 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-17sb/amd/pi/hudson: Spell verb in comment with a spacePaul Menzel
Change-Id: I7d0d8e2a20d15cbed30e98cf4468e9fb5dd0f1ad Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/19292 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-15sb/amd/sb700: Disable LPC ROM mapping when SPI Flash is usedTimothy Pearson
Do not map LPC ROM into the system memory space when SPI Flash is configured instead of an LPC ROM. This resolves a long-standing hard boot hang issue on the ASUS KGPE-D16 and related systems; in a nutshell, the incorrectly mapped LPC ROM overrode low memory required by ramstage, causing decompressed ramstage layout-dependent vectoring to romstage code and subsequent execution of random sections of romstage. Sometimes these random sections of romstage reconfigured the hardware in such a way that it could not access SPI Flash on the next boot attempt. Change-Id: I115e5d834f0ca99c2d9dbb5b9b5badbea1d98574 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/19280 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Daniel Kulesz <daniel.ina1@googlemail.com>
2017-04-14southbridge/via/vt8237r: Get rid of #include early_smbus.cLubomir Rintel
Use linker instead of '#include *.c'. The smbus_fixup() was changed not to use a structure that's defined by a northbridge since multiple different northbridges can be used. Instead the caller now directly passed the memory slot details. Change-Id: Ia369ece6365accbc531736fc463c713bbc134807 Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-on: https://review.coreboot.org/19082 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-14amd/pi/hudson: Add SERIRQ setupMarc Jones
Enable SERIRQ in quiet or continuous mode based on Kconfig. Defaults to quite mode. Change-Id: Ib40a84719fcc3a5d6b3000c3c0412f1bcf629609 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19234 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-14amd/pi/hudson: Add hudson PM register definesMarc Jones
Clean up hudson PM register accesses with some register defines. Change-Id: I5ccf27a2463350baec53b7c79fe0fd4ec6c31306 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19233 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-11sb/intel/i82801gx: Add i2c_block_read to smbus.hArthur Heymans
Using i2c_block_read speeds up reading SPD four to fivefold compared to sequential byte read. TESTED on Intel D945GCLF. Change-Id: I6d768a2ba128329168f26445a4fca6921c0c8642 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18927 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-04-06northbridge/amd/stoney: Add FT4 packageMarshall Dawson
Add package options to the CPU Kconfig that may be selected by the mainboard's Kconfig file. Stoney Ridge is available in FP4 and FT4 packages and each requires a unique binaryPI image. Default to the correct blob used by the northbridge by looking at the CPU's package. Also modify Gardenia to select the right package. See the Infrastructure Roadmap for FP4 (#53555) and FT4 (#55349) for additional details for the packages. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 7b8ed7b732b7cf5503862c5edc6537d672109aec) Change-Id: I7bb15bc4c85c5b4d3d5a6c926c4bc346a282ef27 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18989 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-04-03cimx/sb800: Log southbridge call-sitesKyösti Mälkki
Logging makes it easier to track order of events as these call-sites are scattered on various files. Change-Id: I428547051fd8bf487e91415dc72ee03dba13029e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18718 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28amd/pi/hudson: Add fanless SMU firmware to buildMarshall Dawson
Use the new parameters in amdfwtool to include the additional SMU firmware into amdfw.rom. Change-Id: Ib44860780c8d5fb00c47f775a2a83b82ff3e1821 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19002 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28amd/pi/hudson: Reduce amdfw space requirementMarshall Dawson
Change the current implementation so that multiple PSP directory structures are not included, saving 448 KB. AMD created a mechanism so that multiple generations of APUs, in identical packages, may be supportable in one BIOS image. The PSP identifies the correct directory table by checking one of two pointers in the Embedded Firmware structure. Coreboot doesn't implement this capability, however it has been constructing amdfw.rom with two identical directory tables and two copies of each PSP blob. Tested on Bettong (Merlin Falcon / Carrizo) and Jadeite (Stoney). Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 11dfc3f621344db66d92b61d72927128ea48685f) Change-Id: I139f3bfdb319af803fef64e7bd848e95945f41aa Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18990 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28amd/pi/hudson: Add alternate method for including amdfwMarshall Dawson
For systems using Chrome OS, place the amdfw outside of cbfs control. The firmware must go to a fixed position at an offset of 0x20000 into the flash device. Potentially improve by adding a warning or error message for the condition when sizeof(amdfw) + sizeof(cbfs and metadata) > sizeof(flash). Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 2d9d631b39d7850576438a5b0979936bd33893e1) Change-Id: I38029bc03e5db260424cca293b1a7bceea4d0d75 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18435 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-22southbridge/intel/i82801gx: Fix problems found by checkpatch.plArthur Heymans
Change-Id: Iddc67e7c126ce19429afc24b021e385353564cb8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18705 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-21southbridge/nvidia/mcp55: Get rid of #include early_smbus.cArthur Heymans
Using linker instead of '#include *.c'. Change-Id: I74dfa99c8bb3f4ca7ef3d774be2197897022f52c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18484 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-19sb/intel/common/firmware: Add Intel ME/TXE firmware checkNicola Corna
Ensure that the provided ME/TXE firmware is valid, using the check capabilities of me_cleaner. me_cleaner checks that the fundamental partition is available and it has a correct signature. The checks performed by me_cleaner aren't exhaustive, but they should find at least whether the user has provided an empty or corrupted firmware. me_cleaner has been tested on all the ME (6-11.6) and TXE (1-3) firmwares available here [1], and it hasn't reported any false positive. [1] http://www.win-raid.com/t832f39-Intel-Engine-Firmware-Repositories.html Change-Id: Ie6ea3b4e637dca4097b9377bd0507e84c4e8f687 Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18768 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-08AGESA: Move heap allocator declarationsKyösti Mälkki
Definitions are not part of ACPI S3 feature, nor do they require any AGESA headers so move them to a better location. Change-Id: I9269e9d65463463d9b8280936cf90ef76711ed4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18616 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-03-07amd/pi/hudson: Move APIC enable to CPU fileMarshall Dawson
Relocate the enabling of the LAPIC out of the southbridge source and surround it with a check for CONFIG_UDELAY_LAPIC (typical for AMD systems). The LAPIC is now enabled for all cores; not only the BSP, and not only when the UART is used. This solves the problem of APs not having their APICs enabled when the timer is expected to be functional, e.g. verstage often uses do_printk_va_list() instead of do_printk() which exits early for APs when CONFIG_SQUELCH_EARLY_SMP=y. The changes were tested with two Gardenia builds, one using verstage and another with CONFIG_SQUELCH_EARLY_SMP=n. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 93ffc311165f19d4192a5489051fa4264cd8e0ad) Change-Id: Ieaecc0bf921ee0d2691a8082f2431ea4d0c33749 Signed-off-by: Marc Jones <marcj303@gmail.com> Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18436 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-07amd/pi/hudson/acpi: Only declare S3 if it is supportedMarc Jones
Only declare S3 support in ACPI if CONFIG_HAVE_ACPI_RESUME is set. Change-Id: I6f8f62a92478f3db5de6feaa9822baad3f8e147e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18493 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-07amd/pi/hudson: Add early SPI setupMarshall Dawson
Add some generic functions that can configure the SPI interface to have faster performance. Given that the hudson files are used across many generations of FCHs, make sure to refer to the appropriate BKDG or RRG before using the functions. Notable differences: * Hudson 1 defines read mode in CNTRL0 differently than later gens * Hudson 1 supports setting NormSpeed in Cntr1 but Hudson3 allows setting FastSpeed as well * Kabini, Mullins, Carrizo and Stoney Ridge contain a "new" SPI100 controller Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 1922d6f424dcf1f42e2f21fb7c6d53d7bcc247d0) Change-Id: Id12440e67bc575dbe4b980ef1da931d7bfae188d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18442 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-07amd/pi/hudson: Add SPI definitions to headerMarshall Dawson
Add defines that will be used later for setting the fastest settings in the SPI controller. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit 0d2c28b8156dcc1f3dc925b3c3ba15b6b07f202c) Change-Id: I660cc9ed6910c33042321c80453c7f74912455d9 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18441 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-07amd/pi/hudson: Consolidate BITn definitionsMarshall Dawson
Remove unused definitions from a .c file and use the BIT(n) macro found in types.h instead. Convert existing definitions to BIT(n). Orignial-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit f403d12b49985ee9d9b339a6659b60ef1560519c) Change-Id: I24105bf75263236dbdbc2666f03033069d1d36d2 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/18440 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-03-07AGESA: Remove redundant and invalid IRQ routingKyösti Mälkki
The size of the array did not match that of the actual allocation. Furthermore, the tables are written as part of set_pci_irqs() in hudson/pci.c. Also the removed code was never reached runtime, as it is only executed on ACPI S3 resume path that is currently disabled. Change-Id: If1c47d53a7656bdff40d93fc132c8c057184ae46 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18587 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-23lynxpoint bd82x6x: Enable PCI-to-PCI bridgeKyösti Mälkki
Once the PCI command register is written the bridge forwards future IO and memory regions, as programmed in the respective base and limit registers, to the secondary PCI bus. It was previously argumented this is copy-paste and never known to be required for these more recent platforms: https://review.coreboot.org/#/c/2706/ Change-Id: Ic8911500a30bc83587af8d4b393b66783fa52e18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/18330 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-22southbridge/amd: Add LPC bridge acpi path for Family14 and SB800Tobias Diedrich
Adds the necessary plumbing for acpi_device_path() to find the LPC bridge on the AMD Family14 northbridge with an SB800 southbridge. This is necessary for TPM support since the acpi path to the LPC bridge (_SB.PCI0.ISAB) doesn't match the built-in default in tpm.c (_SB.PCI0.LPCB). Change-Id: I1ba5865d3531d8a4f41399802d58aacdf95fc604 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/18402 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-02-20lynxpoint/broadwell: fix PCH power optimizerMatt DeVillier
Setting both bits 27 and 7 of PCH register PMSYNC_CFG (PMSYNC Configuration; offset 0x33c8) causes pre-OS display init to fail on HSW-U/Lynxpoint and BDW-U ChromeOS devices when the VBIOS/GOP driver is run after the register is set. A re-examination of Intel's reference code reveals that bit 7 should be set for the LP PCH, and bit 27 for non-LP, but not both simultaneously. The previous workaround was to disable the entire power optimizer section via a Kconfig option, which isn't ideal. Test: unset bit 27 of PMSYNC_CFG and boot google/lulu, observe functional pre-OS video output Change-Id: I446e169d23dd446710a1648f0a9b9599568b80aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18385 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20Revert "intel/lynxpoint,broadwell: Fix eDP display in Windows, SeaBios & Tiano"Matt DeVillier
We've been able to narrow down the problem to a single register/ single bit, so revert this commit and address the problem in a follow-on commit. This reverts commit 0f2025da0fd4dce6b951b4c4b97c9370ca7d66db. Change-Id: I780f9ea2976dd223aaa3e060aef6e1af8012c346 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18384 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-08southbridge/intel/common/firmware: allow locking ME without HAVE_ME_BINAaron Durbin
The apollolake boards don't have an me.bin proper, but they still have descriptor regions which need to be locked down. Therefore, remove the restriction of HAVE_ME_BIN from LOCK_MANAGEMENT_ENGINE. BUG=chrome-os-partner:62177 TEST=For apollolake one can select LOCK_MANAGEMENT_ENGINE. Change-Id: I73aab3a604ec25cd56d760bf76cc21c5a298799e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18304 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-04sb/intel/common: Hook up me_cleanerNicola Corna
The me_cleaner option is available on multiple platforms: * Sandy and Ivy Bridge (well tested by multiple users). * Skylake and Braswell (tested). * Haswell, Broadwell and Bay Trail (untested). The untested platforms have been included anyways because all the firmwares are very similar and Intel ME/TXE probably behaves in the same way. Change-Id: I46f461a1a7e058d57259f313142b00146f0196aa Signed-off-by: Nicola Corna <nicola@corna.info> Reviewed-on: https://review.coreboot.org/18206 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-13sb/nvidia/mcp55: Fix typo in nic.cMartin Roth
The comparison value was obviously wrong here. One too many 'f' characters. Found-by: Coverity Scan #1229588 & 1229604 Change-Id: Iedd4f956d846f1c8661390b346c7397346def86b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18100 Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-12sb/intel/ibexpeak: Update debug code to match other chipsMartin Roth
Other chips dump tco_status here if it wasn't handled, which makes sense. tco_sts can't be zero here, because the call would have already returned if it were. Also, dump_tco_status wouldn't print anything if tco_sts were zero. This will still only print the debug information if DEBUG_SMI is enabled in Kconfig, so in general, this change won't have much of an effect on anything. Found-by: Coverity Scan #1229598 Change-Id: Id2c69a16817ba18dfa051f514138fbc04a2f7bee Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18101 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-12sb/intel/fsp_rangeley: Fix NULL check in gpio.cMartin Roth
This should always have been an and, not an or. The only way this would happen is if no GPIOs were getting configured, so we shouldn't ever have a NULL here, but if we did, GPIOs would be randomly configured, which would have 'interesting' results. Found-by: Coverity Scan #1229633 & 1229632 Change-Id: If123372658383f84279738e1186425beba3208ca Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18095 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-12fsp 1.0 systems: Check for NULL when saving HobListPtrMartin Roth
Die if cbmem_add can't allocate memory for the hob pointer. This shouldn't ever happen, but it's a reasonable check. - fsp_broadwell_de already had a check, but it returned to someplace inside the FSP. Just die instead. Change-Id: Ieef8d6ab81aab0ec3d52b729e34566bb34ee0623 Found-by: Coverity Scan #1291162 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18092 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2017-01-10amd/hudson/agesa: Fix position of hudson_fwmRicardo Ribalda Delgado
AMDFWTOOL calculates the location of the amdfw based on the CONFIG_ROM_SIZE. If HUDSON_FWM_POSITION does not match that location the resulting rom does not boot. This patch forces the position of HUDSON_FWM_POSITION to be the position calculated by amdfwrom. Tested on a Bettong derivative with a 16MiB flash. Change-Id: I3ce69f77174327c18ff97e551c0665c9f633991e Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: https://review.coreboot.org/17934 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-01-10amd/hudson/pi: Fix position of hudson_fwmRicardo Ribalda Delgado
AMDFWTOOL calculates the location of the amdfw based on the CONFIG_ROM_SIZE. If HUDSON_FWM_POSITION does not match that location the resulting rom does not boot. This patch forces the position of HUDSON_FWM_POSITION to be the position calculated by amdfwrom. Tested on a Bettong derivative with a 16MiB flash. Change-Id: Id2ee96ee076293d48ade84fd6e976ca994dcf491 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-on: https://review.coreboot.org/17925 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-01-10intel/i82801dx: Support 2MiB FWH partKyösti Mälkki
Default setting of southbridge assigned 1MiB of memory for FWH ID 0, while 2MiB is commercially available. Only remap IDs when large ROM is requested in case some board uses multiple FWH parts. Change-Id: I500425f42f755f911d84c6f94a9f3ab5a1ca0b51 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17918 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-05src/amd: Add common definition of AMD ACPI MMIO addressTimothy Pearson
The bare ACPI MMIO address 0xFED80000 was used in multiple AMD mainboard files as well as the SB800 native code. Reduce duplication by using a centrally defined value for all AMD ACPI MMIO access. Change-Id: I39a30c0d0733096dbd5892c9e18855aa5bb5a4a7 Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-on: https://review.coreboot.org/18032 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-04amdfam10: Perform major include ".c" cleanupDamien Zammit
Previously, all romstages for this northbridge family would compile via 1 single C file with everything included into the romstage.c file (!) This patch separates the build into separate .o modules and links them accordingly. Currently compiles and links all fam10 roms without breaking other roms. Both DDR2 and DDR3 have been completed TESTED on REACTS: passes all boot tests for 2 boards ASUS KGPE-D16 ASUS KFSN4-DRE Some extra changes were required to make it compile otherwise there were unused functions in included "c" files. This is because I needed to exchange CIMX for the native southbridge routines. See in particular: advansus/a785e-i asus/m5a88-v avalue/eax-785e A followup patch may be required to fix the above boards. See FIXME, XXX tags Change-Id: Id0f9849578fd0f8b1eab83aed910902c27354426 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/17625 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
2017-01-03broadcom/bcm5785: don't treat KBC-DATA as COM1Patrick Georgi
Add a break statement instead. While there, fix a bunch of typos in comments. Change-Id: I465c0188d4b46eabf8d17e69fa0fdc6a9c2ad66e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229645 Reviewed-on: https://review.coreboot.org/18013 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03sb/nvidia/mcp55: Fix P_state generationArthur Heymans
amd_generate_powernow is never called by in lpc_slave_ops. Move it to lpc_ops like on all other AMD southbridges. TESTED on Gigabyte ga-m57sli-s4 Change-Id: I7db036e681d591a19e15dd3eaafb88b72a41bea1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17977 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-03sb/intel/common/gpio: Support ICH9M and priorPatrick Rudolph
Write gpio level twice to make sure the level is set after pins have been configred as GPIO and to minimize glitches on newer hardware. Required to set correct GPIO layout on T500. Tested on T500. Change-Id: I691e672c7cb52ca51a80fd29657ada7488db0d41 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/18012 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins)
2016-12-23spi: Get rid of SPI_ATOMIC_SEQUENCINGFurquan Shaikh
SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-19pcengines/apu2: add board supportPiotr Król
Initial work based on db-ft3b-ls and code released by Eltan. Board boots with some limitation. Now the AGESA binary is harcoded and board specific until it's fixed by the SoC vendor. memtest86+ from external repo skips looking for SPD on SMBus, which when performed cause memtest86+ to hang. Still didn't tried whole test suit. SeaBIOS 1.9.3 have some problems with USB which lead to no booting in some cases. Full log: https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872 SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios) works fine. Those changes are planned for upstream. Information about obtaining and booting Voyage Linux: https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org> Reviewed-on: https://review.coreboot.org/14138 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-12-18intel/i82801ix: Add HAVE_INTEL_FIRMWAREKyösti Mälkki
Select this to provide menu in menuconfig to add flash descriptor file. ME or GbE firmwares themselves are not required, but integrated NIC MAC and SPI configuration fields are still useful. Change-Id: I14b86e2f38ec39924d2cbf0932d82f66ed356a03 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17805 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-11intel/i945: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Scratchpad register was read too late in ramstage so acpi_is_wakeup_s3() did not evaluate correctly. This fixes low memory corruption at 0x1000-0x102c and the lack of coreboot tables (util/cbmem not working) after S3 resume. This also fixes console log from reporting early in ramstage "Normal boot" while on "S3 resume" path. Change-Id: I2922a15a90d2f8272c3482579bdd96f8f33e9705 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17675 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11intel/gm45: Use romstage_handoff for S3Kyösti Mälkki
Don't use scratchpad registers when we have romstage_handoff to pass S3 resume flag. Also fixes console log from reporting early in ramstage "Normal boot" while on S3 resume path. Change-Id: I4e2eabc59ff87b7ed40cfc9885bbe0256fe4a695 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17674 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-11x86 SMM: Fix use with RELOCATABLE_RAMSTAGEKyösti Mälkki
The value for _size was not evaluated correctly if ramstage is relocated, make the calculation runtime. While touching it, move symbol declarations to header file. Change-Id: I4402315945771acf1c86a81cac6d43f1fe99a2a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-10intel 82801dx/gx/ix: Commit SMM relocation code to DRAMKyösti Mälkki
Make sure relocation code reaches DRAM before issuing any SMIs. Snooping and cache coherency may have undefined behaviour as CPUs do not have uniform MTRR layout yet. Change-Id: I47a7d684e05ff8c1c2f1f6a5bf8c0bbc561d9eac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17712 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08buildsystem: Drop explicit (k)config.h includesKyösti Mälkki
We have kconfig.h auto-included and it pulls config.h too. Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17655 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-08sb/intel/bd82x6x: Add TCO_Lock in finalize stepDennis Wassenberg
CHIPSEC found that the TCO_Lock was not set. This is used to prevent changing the TCO_EN bit. Change-Id: I42364dbef2511e656662566cf94591e76c6847ed Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Reviewed-on: https://review.coreboot.org/17351 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06PCI ops: Define read-modify-write routines globallyKyösti Mälkki
Change-Id: I7d64f46bb4ec3229879a60159efc8a8408512acd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17690 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. I liked the style of code in pci_mmio_cfg.h more, and used those to replace the ones in io.h. Change-Id: Ib5e6a451866c95d1edb9060c7f94070830b90e92 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17689 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06PCI ops: Remove conflicting duplicate declarationsKyösti Mälkki
The code originates from times before __SIMPLE_DEVICE__ was introduced. To keep behaviour unchanged, use explicit PCI IO operations here. Change-Id: I44851633115f9aee4c308fd3711571a4b14c5f2f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17720 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: If62537475eb67b7ecf85f2292a2a954a41bc18d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17545 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: I943e354af0403e61263f1c780f02c7b463b3fe11 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17529 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06spi_flash: Make a deep copy of spi_slave structureFurquan Shaikh
Commit 36b81af (spi: Pass pointer to spi_slave structure in spi_setup_slave) changes the way spi_setup_slave handles the spi_slave structure. Instead of expecting spi controller drivers to maintain spi_slave structure in CAR_GLOBAL/data section, caller is expected to manage the spi_slave structure. This requires that spi_flash drivers maintain spi_slave structure and flash probe function needs to make a copy of the passed in spi_slave structure. This change fixes the regression on Lenovo X230 and other mainboards. Change-Id: I0ad971eecaf3bfe301e9f95badc043193cc27cab Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17728 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Iru Cai <mytbk920423@gmail.com>
2016-12-05mainboard & southbridge: Clear files that are just headersMartin Roth
These headers & comments indicating a lack of functionality don't help anything. We discourage copyrights and licenses on empty files, so just clear these. Change-Id: Id2ab060a2726cac6ab047d49a6e6b153f52ffe6d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17657 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-04spi_flash: Move spi flash opcodes to spi_flash.hFurquan Shaikh
BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I3b6656923bb312de470da43a23f66f350e1cebc7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17680 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01AMD binaryPI: Use explicit PCI IO config access in bootblockKyösti Mälkki
This allows us to set MMCONF_SUPPORT_DEFAULT since we enable MMCONF early in romstage. Change-Id: I380cf483bfe4e2d64969110ae6d5d04c3ced2418 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17532 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01AGESA: Use explicit PCI IO config access in bootblockKyösti Mälkki
This allows us to set MMCONF_SUPPORT_DEFAULT since we enable MMCONF early in romstage. Change-Id: I994bb257db96300c2eb8872be6fae2a92bbabab4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17531 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30sb/intel/lynxpoint: add missing I2C ACPI SSCN/FMCN methodsPrabal Saha
The SSCN and FMCN methods provide the optimal HCNT/LCNT timing values to the driver, and are necessary when using I2C devices (eg, trackpad and touchscreen) in ACPI (vs PCI) mode. Add these methods using the timing values from Broadwell, which work for Haswell/Lynxpoint as well. TEST: build google/peppy with trackpad/touchscreen devices in ACPI mode, observe proper operation under Windows [8.1/10] and Linux [Mint 18] Change-Id: I25f07ac474b041358315530e5f391bb33d9c4d04 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17620 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Prabal Saha <coolstarorganization@gmail.com>
2016-11-28sb/intel/i3100/lpc.c: Use tab for indentsElyes HAOUAS
Change-Id: I37d0b1ad84a95342015659d319ac4ce20e5717be Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17584 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28sb/broadcom/bcm5785/reset.c: Use tab for indentsElyes HAOUAS
Change-Id: If4350da1c9a7af5228be01a063486433860781e0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17583 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-28sb/ricoh/rl5c476/rl5c476.c: Use tab for indentsElyes HAOUAS
Change-Id: I3967d1ff0623037efa66927843e0c47f408832d7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17582 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-23AGESA binaryPI: Fix PCI ID namespaceKyösti Mälkki
The defines of device IDs reflects the vendor namespace the ID has been allocated from. Change-Id: Id98f45d5984752a9e8c0484d4cb94e93e55b12f6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17510 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-22via/k8t890: Compose a list of PCI IDsKyösti Mälkki
Change-Id: Ic474e17b70d64b63356a0ba7dd1649e5a6ff3a30 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17549 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-11-22spi: Get rid of flash_programmer_probe in spi_slave structureFurquan Shaikh
flash_programmer_probe is a property of the spi flash driver and does not belong in the spi_slave structure. Thus, make spi_flash_programmer_probe a callback from the spi_flash_probe function. Logic still remains the same as before (order matters): 1. Try spi_flash_programmer_probe without force option 2. Try generic flash probing 3. Try spi_flash_programmer_probe with force option If none of the above steps work, fail probing. Flash controller is expected to honor force option to decide whether to perform specialized probing or to defer to generic probing. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I4163593eea034fa044ec2216e56d0ea3fbc86c7d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17465 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-22spi: Clean up SPI flash driver interfaceFurquan Shaikh
RW flag was added to spi_slave structure to get around a requirement on some AMD flash controllers that need to group together all spi volatile operations (write/erase). This rw flag is not a property or attribute of the SPI slave or controller. Thus, instead of saving it in spi_slave structure, clean up the SPI flash driver interface. This allows chipsets/mainboards (that require volatile operations to be grouped) to indicate beginning and end of such grouped operations. New user APIs are added to allow users to perform probe, read, write, erase, volatile group begin and end operations. Callbacks defined in spi_flash structure are expected to be used only by the SPI flash driver. Any chipset that requires grouping of volatile operations can select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and define callbacks for chipset_volatile_group_{begin,end}. spi_claim_bus/spi_release_bus calls have been removed from the SPI flash chip drivers which end up calling do_spi_flash_cmd since it already has required calls for claiming and releasing SPI bus before performing a read/write operation. BUG=None BRANCH=None TEST=Compiles successfully. Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17462 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-21intel/i82801gx: Reorder spaces in outputPaul Menzel
Currently, the coreboot log of a Lenovo X60, not having any IDE devices connected, there is a trailing whitespace in the output. […] PCI: 00:1f.1 init ... i82801gx_ide: initializing... PCI: 00:1f.1 init finished in 11 usecs […] Reorder the whitespaces, so they are added when needed. Change-Id: I640e514c89fe0246a847d1fd088def1c88e864f8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/11870 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-11-21AMD binaryPI: Drop commented code with bad PCI IDsKyösti Mälkki
There is mismatch of VENDOR_ID_AMD with DEVICE_ID_ATI, also the device IDs have not been defined. Change-Id: I3076cb08e3181e7f86de38deb18f1661f037bc38 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17508 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-21AGESA: Drop commented code with bad PCI IDsKyösti Mälkki
There is mismatch of VENDOR_ID_AMD with DEVICE_ID_ATI, also the device IDs have not been defined. Change-Id: I0d85893169fe877e384746931605f563c50308b2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17509 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-21AMD sb700: Fix PCI ID errorKyösti Mälkki
Broken since March 2010, looking for incorrect PCI VENDOR. Change-Id: I1960aa168e59364ad962f00c81b67b8bdc5773ad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17514 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-21AMD sb600: Fix PCI ID errorKyösti Mälkki
Broken since February 2008, looking for incorrect PCI VENDOR. Change-Id: I6935683a8a7428ca9b2e90bcc0a090c3865ffd33 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17513 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-18sb/lynxpoint: use hda_verb.c from VARIANT_DIR if applicableMatt DeVillier
Change-Id: Ie2d0cf573876694fe87edf2f6915a5cc26238940 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17453 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-10southbridge/amd: Remove debug echo when building PIMartin Roth
If this information is needed, use make V=1. That will print the actual command, not a command that needs to be updated with every addition if it's going to stay in sync. Change-Id: I64d33d93c7fad3359d8ef78657bdb86d1fb4d4a1 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/17328 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-10southbridge/amd: update for amdfwtool size on command lineMartin Roth
amdfwtool was getting the ROM size as a #define when it was built. It has been updated to pass it in as a command line parameter, so now it can be built just once for abuild as a shared tool. Update the calls to amdfwtool to pass the ROM size. All platforms using amdfwtool had the output verified using a binary compare. This reverts commit 0529236ed22f1a28d29f2054674004c4f7a056e7 (Makefile.inc: Don't share amdfwtool between platforms) Change-Id: I188b34e08249f2d00bd48957ced750b21f1ec348 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/17327 Tested-by: build bot (Jenkins) Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2016-11-09southbridge/intel/i82801dx: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside southbridge/intel/i82801dx. Change-Id: I32888930d3742432a73dfc0a32c6586186e6757c Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/17297 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-08southbridge/intel: Set chipset in ifdtool invocationsAndrey Petrov
Since IFD format is floating, ifdtool needs to be parameterized with a chipset it is dealing with. Add -p <chipset> argument to ifdtool invocations if chipset provides it. Change-Id: I4fd1783b5d994617912aedcf17adc2a98c97227b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17258 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07southbridge/amd: Update Kconfig and makefiles for 00670F00Marc Jones
Add Stoney specific code subtree and fix Makefles and Kconfig files. Author: Charles Marslett <charles@scarlettechnologies.com> Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit c3a469d11e4676b3b63d11a30955113291d00ec8) Change-Id: Ic4d97a3745f7fc5a637ae6da17a9009b9757136e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17217 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-07amd/pi/hudson: Move audio to northbridgeMarshall Dawson
Carrizo (00660F01), Merlin Falcon (00660F01), and Stoney Ridge (00670F00) locate the HD audio controller on the northbridge root complex at 9.2 instead of the FCH. This duplicates the existing ASL into the northbridge directories and reports the correct address. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marc Jones <marcj303@gmail.com> (cherry picked from commit f68206c2b42c90076efd968a99f4d3a49e403438) Change-Id: I6d42bb40ad58c7f35e8c88ff27ebd327d656c021 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17216 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-11-02amd/hudson: Add PSP2 build for combo BIOSMarc Jones
The Stoney processor can use multiple directory structures. Turn this feature on in the makefile. Original-Signed-off-by: Marc Jones <marcj303@gmail.com> Original-Tested-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> (cherry picked from commit a3334632fd53c07a046c9b23161f6ee67e5cb16e) Change-Id: I40a9ef2e6bed51bc339d3f9ae7c6f316192c4a78 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17149 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Zheng Bao <fishbaozi@gmail.com>
2016-11-02util/amdfwtool: Fix duplicate long option nameMarshall Dawson
Make the PSP2 smufirmware2 name unique so the command-line option gets picked up. Original-Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Original-Reviewed-by: <marcj303@gmail.com> (cherry picked from commit 98cf3880797f72aeb7169c3f8718a10092af9624) Change-Id: I5430cf8b81fb03c95e6ee9d7e53455e6224256ff Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/17146 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>