Age | Commit message (Collapse) | Author |
|
These were probably copy-pasted from some ICHx southbridge, and then
some were corrected because native PCH init uses them. Delete the
definitions which are unused and are invalid for this southbridge.
Change-Id: I0be72f76c7fcc63316ae8566891e0732456a8c55
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
These were probably copy-pasted from some ICHx southbridge. However,
datasheet shows that some of these are located elsewhere, and some
others have disappeared completely. As they aren't in use, drop them.
Change-Id: I2d09547bdbfd5f8f72ce3541347d9fec28630c79
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
|
|
This device doesn't exist on these southbridges.
Change-Id: Ie17427ba044c465adf95300ff7f5610c25ae3373
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Some cases could not be factored out while keeping reproducibility.
Also mark some potential bugs with a FIXME comment, since fixing them
while also keeping the binary unchanged is pretty much impossible.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: I27d6aaa59e12a337f80a6d3387cc9c8ae5949384
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42154
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PCIe RPC (Root Port Configuration) straps will force-disable some root
port functions if some root ports have a width greater than x1. In two
cases, this affects the last function. The PCIe init code will never
finish configuring the root ports if that is the case: it assumes that
the last function will eventually run through the code, but it doesn't.
If PCIe initialization does not complete, pressing the power button will
not power off the board, unless it is held for about five seconds. Also,
Windows 10 will show a BSOD about MACHINE CHECK EXCEPTION, and lock up
instead of rebooting. Depending on the microcode version, the BSOD may
not be visible. This happens even when the root port is not populated.
Use the strap fuse configuration value to know which configuration the
PCH is strapped to. If needed, update the number of ports accordingly.
In addition, print the updated value to ease debugging PCIe init code.
Existing code in coreboot disagrees with public documentation about the
root port width straps. Assume existing code is correct and document
these assumptions in a table, as an explanation for the added code.
Tested on Asrock B85M Pro4, PCIe initialization completes successfully.
Change-Id: Id6da3a1f45467f00002a5ed41df8650f4a74eeba
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44155
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Also drop a now-unnecessary #undef directive from one mainboard.
Change-Id: I613e77723d108641f16ec732358849c3bc0e49e0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43220
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code has been commented out for a long time. Drop it.
Change-Id: Iddc635dc5bbc7a8b42e97f4e2f6d579a839d874b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43264
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While we are at it, also reflow a few lines that fit in 96 characters.
Tested with BUILD_TIMELESS=1, Getac P470 does not change.
Change-Id: I2cc3e71723e9b6898e6ec29f0f38b1b3b7446f09
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
I would like to make assertions evaluate at compile time where possible,
but sometimes people used a literal assert(0) to force an assertion in a
certain code path. We already have BUG() for that so let's just replace
those instances with that.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I674e5f8ec7f5fe8b92b1c7c95d9f9202d422ce32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Jenkins complains about `const char *` and says it should instead be
changed to `const char *const`. So, change it so that Jenkins is happy.
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 does not change.
Change-Id: Iecd5fecdefdc2effd0114706648747460d0a4a72
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42630
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Looks like no one really knows what this bit would be useful for, nor
when it would need to be set. Especially if coreboot is setting it even
on PCI *Express* bridges. Digging through git history, nearly all
instances of setting it on PCIe bridges comes from i82801gx, for which
no reason was given as to why this would be needed. The other instances
in Intel code seem to have been, unsurprisingly, copy-pasted.
Drop all uses of this definition and rename it to avoid confusion. The
negation in the name could trick people into setting this bit again.
Tested on Asrock B85M Pro4, no visible difference.
Change-Id: Ifaff29561769c111fb7897e95dbea842faec5df4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
All boards disable PIRQs. They aren't used on modern OSes anyway.
Change-Id: I1351fd4a3910e8cf2e9afe51dc2e82c7464de403
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BIT(x) needs <types.h>.
Change-Id: I709b98e57275a5666a9627af9f57a7d47c855c88
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The outb() call is replaced with the post_code()
The post_codes.h is replaced with console.h since console.h
includes both the post_code definition and post_codes.h
Change-Id: I21345260e86de30614c416e2f509bd77b9e00cb7
Signed-off-by: Sindhoor Tilak <sindhoor@sin9yt.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We have definitions for the bits in the PCI COMMAND register. Use them.
Also add spaces around bitwise operators, to comply with the code style.
Change-Id: Icc9c06597b340fc63fa583dd935e42e61ad9fbe5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
These will be put to use in a follow-up.
Change-Id: Id13dde5ce2239064b9b18de7ca516525158ae268
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove EIO define. It is unused and means something else,
elsewhere in the tree.
Move PMIOSE bit definition next to PMREGMISC, where it actually
belongs.
Correct a number of bit defines with glaring errors.
Clarify in comments which PM register defines are in PCI config
space are which are in I/O space.
Change-Id: Ic7f2267d013403c0a519c2ee1786bd3c7f5a9708
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib41341b42904dc3050a97b70966dde7e46057d6b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Both files are identical, so we only need one copy in the tree.
Change-Id: I07d7429caca7f6211a186b770c3608f642d4f269
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43159
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There's no need to set up the southbridge in the northbridge code.
Change-Id: I0f80c92aca885812c27a8803c2745844d8dfb939
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Looks like these comments were moved without checking them. They are no
longer correct nor useful, so kill them with fire.
Change-Id: I3de04b8c03f7c511376dec922a60958ffc3bf6a3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Other Intel southbridges use this name for the HD audio codec.
Change-Id: Ic96797e6c2028f082130211bb5f4270391f866c5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Other Intel southbridges use this name for the HD audio codec.
Change-Id: I50dbf0a079944b7fa6cfd6622c0626bc9139af85
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It is impossible for `find_resource` to return NULL, it dies instead.
Change-Id: If8e26f768383e741100e3690322db3dabeec1922
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The three mainboards using this southbridge are desktop boards, which
are not dockable. The Dell Precision M6400 laptop is dockable, but even
though it has an Eaglelake MCH, it uses an i82801ix southbridge instead.
So, one could still port that laptop to coreboot after this change! :P
Also, drop the now-unnecessary `chip` and `dev` variables.
Change-Id: Ic9ab497c91d66032929190cde22d59a208887f50
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The three mainboards using this southbridge do not define it. Note that
the default value of zero might be wrong, so add a FIXME comment.
Change-Id: Id16bb12a4628daf311bddf7e4701fc480d6b18e5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I1baa731335a9c543c7d31b9aadc8758806750c64
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42629
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2cf11b784299708f02fd749dcb887b6d25f86f5b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
While it looks different, the early SMBus code for this southbridge is
still the same. In addition, this code was not checking the vendor ID
before. It is assumed that adding this check does not pose a problem.
Change-Id: I95ae4db399ce5592cefca82fa75f349220023b8c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42006
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The early SMBus code for this southbridge checked if the PCI device ID
is valid. However, we can't easily do that in common code, and we should
not attempt to do so either: if a SMBus device behaves differently, then
it should not be using the common code anyway.
Since this southbridge is used with two different northbridges, we need
to update both of them. Plus, x4x raminit no longer needs to know which
southbridge it is paired with, since both i82801gx and i82801jx use the
common early SMBus code, so we drop some preprocessor around includes.
Change-Id: Ic60a3f89bda6000fbe646461f05240c1b09db6e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42005
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The early SMBus code for this southbridge checked if the PCI device ID
is valid. However, we can't easily do that in common code, and we should
not attempt to do so either: if a SMBus device behaves differently, then
it should not be using the common code anyway.
Change-Id: I5c21e091e437d23a173ddcf35d4f1efada6194cb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42004
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The early SMBus code for this chipset was not checking the vendor ID
before. It is assumed that adding this check does not pose a problem.
Change-Id: I0c36c8cd8aca8db860b1edafd29d4f2dbaa2c822
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42003
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Looks like no one uses early SMBus for now, but that may change someday.
Change-Id: I42971662a279860a8c2e058fcb194fe5eba7c740
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42001
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I95b82f3d733db2a46096205f23ed85aaff021e28
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42000
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We will update the other platforms to use this common code in
susbsequent commits. While we are at it, reflow a broken line,
define the SMBus PCI device in the header and fix whitespace.
Change-Id: I1fdff2feead4165f02b24cb948d8c03318969014
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41999
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make it default to 0x400, which is what the touched southbridges use.
Change-Id: I95cb1730d5bf6f596ed1ca8e7dba40b6a9e882fe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
According to the ACPI specification, version 6.3:
Accesses to the PM1 status registers are done through byte or word
accesses.
The same is said about the PM1 Enable registers. Therefore, reporting
dword-sized access is wrong and means nothing anyway. Since some other
platforms use word-sized access, use word everywhere for consistency.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: I6f85c9a4126f37ab2a193c3ab50a6c8e62cf6515
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43432
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, AOpen DXPL Plus-U remains identical.
Change-Id: I80ec4d0d6a8ec0dc02b377cfa3f3b5f0362dbb6c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change.
Change-Id: I2212a6dd4b02ac8fdcf1eafbab0226ad9faa825e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: If0ee1b65a1be67ee9f5f832f076c365017a14e6a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
All supported x86 chips select HAVE_CF9_RESET, and also use 0xcf9 as
reset register in FADT. How unsurprising. We might as well use that
information to automatically fill in the FADT accordingly. So, do it.
To avoid having x86-specific code under arch-agnostic `acpi/`, create a
new optional `arch_fill_fadt` function, and override it for x86 systems.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Ib436b04aafd66c3ddfa205b870c1e95afb3e846d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
They are ignored if the ACPI_FADT_WBINVD flag is set, which is required
on current ACPI versions and only maintained for ACPI 1.0 compatibility.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Ief1219542ba71d18153b64180e0ff60bd1e7687b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Instead, just flip the desired bits using bitwise operations. As this is
initially zero, the resulting value is the same. This allows flags to be
set from anywhere regardless of execution order.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Icfd580a20524936cd0adac574331b09fb2aea925
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43387
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to Intel Order Number 290562 (PIIX4 datasheet), 0xcf9 is the
reset register, and setting bits 1 and 2 will result in a hard reset.
Change-Id: Id5ada6a10b2269d51908c6a5fd7745ef6c33a29a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
According to Intel Document 290744 (ICH4 datasheet), 0xcf9 is the reset
register, and setting bits 1 and 2 will result in a hard reset.
Change-Id: Id1a532857d9643d222d61c3902faadd471ae2a9a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PM2_CNT register block is not present on this southbridge, as per
Intel Document 290744 (ICH4 datasheet). Also, the ACPI specification,
version 6.3, section 4.8.1.3 (PM2 Control Register), says:
This register block is optional, if not supported its block pointer and
length contain a value of zero.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything to indicate PM2_CNT is not supported. So, drop unneeded values.
Also delete a comment about `pm2_cnt_len`, which said that the right
value differs from zero. Looks like that comment was wrong instead.
Change-Id: Icbb32f5db7b368c764b3477c40f8ae9c788df5ee
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43383
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PM2_CNT register block is not present on this southbridge, according
to comments on the code. As per the ACPI specification, version 6.3,
section 4.8.1.3 (PM2 Control Register):
This register block is optional, if not supported its block pointer and
length contain a value of zero.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything to indicate PM2_CNT is not supported. So, drop unneeded values.
Change-Id: Ib3ff0fd9e0725f61c38e60ba56b95e6e77b0b1ed
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43382
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PM2_CNT register block is no longer needed, as explained in some
comments. While they may have been copy-pasted around a lot, they are at
least true for Hudson, and it makes sense to assume that they are true
for newer chipsets as well. As per the ACPI specification, version 6.3,
section 4.8.1.3 (PM2 Control Register):
This register block is optional, if not supported its block pointer and
length contain a value of zero.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything to indicate PM2_CNT is not supported. So, drop unneeded values.
Change-Id: Iabc7985c84aabe40ad98fdc9fc6ccbbab0a516c1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43381
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
None of the currently-supported chips has PM1b_EVT nor PM1b_CNT event
register blocks. According to the ACPI specification, version 6.3,
sections 4.8.1.1 and 4.8.1.2 (PM1 Event/Control Registers):
If the PM1b_EVT_BLK is not supported, its pointer contains a value of
zero in the FADT.
If the PM1b_CNT_BLK is not supported, its pointer contains a value of
zero in the FADT.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything with PM1b for now. So, drop unneeded writes to PM1b fields.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Iff788b2ff17ba190a8dd9b0b540f1ef059a1a0ea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43380
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
None of the currently-supported chips has a GPE1 block. The ACPI spec,
version 6.3, section 4.8.1.6 (General-Purpose Event Registers) says:
If a generic register block is not supported then its respective
block pointer and block length values in the FADT table contain zeros.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything with GPE1 for now. So, drop the unneeded writes to GPE1 fields.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Iefc4bbc6e16fac12e0a9324d5a50b20aad59a6cd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43379
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Other Intel southbridges do this.
Change-Id: I9b0c8be34e01b617352da4ff8ff37f4b44a4b334
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
Other Intel southbridges do this.
Change-Id: I6ae78696b0fa2d91dd2c6de0a3ef28e08d85e93b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
Other Intel southbridges do this.
Change-Id: I8306295fb87776aab5ed0e56e1a9c480c65fe3c6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/msr.h>' -- src/) <(git grep -l 'IA32_EFER\|EFER_\|TSC_MSR\|IA32_\|FEATURE_CONTROL_LOCK_BIT\|FEATURE_ENABLE_VMX\|SMRR_ENABLE\|CPUID_\|SGX_GLOBAL_ENABLE\|PLATFORM_INFO_SET_TDP\|SMBASE_RO_MSR\|MCG_CTL_P\|MCA_BANKS_MASK\|FAST_STRINGS_ENABLE_BIT\|SPEED_STEP_ENABLE_BIT\|ENERGY_POLICY_\|SMRR_PHYSMASK_\|MCA_STATUS_\|VMX_BASIC_HI_DUAL_MONITOR\|MC0_ADDR\|MC0_MISC\|MC0_CTL_MASK\|msr_struct\|msrinit_struct\|soc_msr_read\|soc_msr_write\|rdmsr\|wrmsr\|mca_valid\|mca_over\|mca_uc\|mca_en\|mca_miscv\|mca_addrv\|mca_pcc\|mca_idv\|mca_cecc\|mca_uecc\|mca_defd\|mca_poison\|mca_sublink\|mca_err_code\|mca_err_extcode\|MCA_ERRCODE_\|MCA_BANK_\|MCA_ERRTYPE_\|mca_err_type\|msr_set_bit\|msr_t\|msrinit_t' -- src/) |grep '<'
Change-Id: I45a41e77e5269969280e9f95cfc0effe7f117a40
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41969
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<'
Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Files found using:
diff <(git grep -l '#include <types.h>' -- src/) <(git grep -l 'BIT(\|size_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\|MAYBE_STATIC_NONZERO\|zeroptr\|int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|bool\|true\|false\|cb_err\|CB_SUCCESS\|CB_ERR\|CB_ERR_ARG\|CB_CMOS_\|CB_KBD_\|CB_I2C_\|cb_err_t\|DIV_ROUND_CLOSEST\|container_of\|__unused\|alloca(\|ARRAY_SIZE\|ALIGN\|ALIGN_UP\|ALIGN_DOWN\|IS_ALIGNED\|__CMP_UNSAFE\|MIN_UNSAFE\|MAX_UNSAFE\|__CMP_SAFE\|__CMP\|MIN(\|MAX(\|ABS(\|IS_POWER_OF_2\|POWER_OF_2\|DIV_ROUND_UP\|SWAP(\|KiB\|MiB\|GiB\|KHz\|MHz\|GHz\|offsetof(\|check_member\|member_size' -- src/)|grep -v vendor |grep '<'
Change-Id: I5d99d844cc58d80acb505d98da9d3ec76319b2eb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41677
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/) |grep -v vendorcode |grep '<'
Change-Id: I12802d0a6254b2fa39d59f485008bb2012f7b32d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41913
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reduces differences with Broadwell.
Tested with BUILD_TIMELESS=1, Google Panther remains identical.
Change-Id: I81c34fd03a176d0575f2fbd254052d90f2b38487
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
IRQ 10 and IRQ 11 are valid for all southbridges using this code, as per
their respective datasheets. So, add them for the sake of completeness.
Change-Id: Ib4504861ed316a95b9735e0ed79f108f18071b3b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43158
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current code only cares whether the PCH is LP or not. However, MRC wants
to differentiate between desktop and non-LP mobile platforms as well. As
the PCH is soldered onto the mainboard, add a facility to retrieve which
platform coreboot is running on by checking the PCH's LPC device ID. The
only user of the `pch_silicon_type` function is the `pch_is_lp` function
so replace the former with the new `get_pch_platform_type` function. The
function needs to be defined in both romstage and ramstage where PCI ops
have different signatures, hence the two copies.
Change-Id: Ib6276e0069eaa069a365faf6ae02dd934307d36c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43123
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The current value of 0x1000 would overlap the first PCI bridge IO
window. As we commonly reserve IO range 0x0 .. 0x1000 for LPC and
integrated device use, change SMBUS_IO_BASE to 0x400. This is the
prevalent value among Intel southbridges, too.
Change-Id: I5c299f001f9012d6766b155a2f5def5cff6e88d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43023
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I2a244436adb8f41e4246aad7e3bfaf0986f2d832
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43260
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Sort them by stage execution order, then alphabetically. Place more
complex rules at the end.
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical.
Change-Id: Ieadda7c264e0288a212b73febbe9f73351cc4de4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42649
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Sort them by stage execution order, then alphabetically. Place more
complex rules at the end.
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical.
Change-Id: I1b36d6c0b2e615938272d65456cf10be54f66c38
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42648
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: Idc600d7a1ce1e47ea4c361caf2b32f1faa56e0f7
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43265
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I88cb6116c112b76336846d01e31f2cd40d6ca4cb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I0fbdf8d7a3d89fefcd321dc3ba4ddd82c309e667
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I51a2b71abc7762b550f69f2980dd34f0e4947ab5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43219
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: Icd6b3226814f48c4cdd2c2f879c66cb6847a14e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43216
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I0296cb4265c5b68ee9e11b140763b7d50d1da7ea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43218
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I2fff78231d6dfbed56bb885aa23d5cd2a745325e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43217
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This simplifies things and makes type checking possible.
Change-Id: Iefc9baabae286aac2f2c46853adf1f6edf01586f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
It is no longer used anywhere. Drop it before it rots.
Change-Id: I4bc3d5bd898058e575144a3c6c3fccb78dcff2e2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Instead of passing around a pointer to an array, just write the relevant
registers directly. Note that intel/baskingridge used spaces to indent
line continuations and had to be replaced with tabs to quell Jenkins.
Change-Id: Ifa06a2ab24da9b8c6aac6480542fa32d04f6d6fe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Perform the same operations as the RCBA reg script did, but directly
writing the corresponding registers. Some of these operations could be
simplified, but it is not done on this commit to ease verification.
Change-Id: I4c3177ab14ca9bfa2e8d11c27fb249850183eee5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Comments stating that this was mainboard-specific were very wrong.
Change-Id: I7026ca9c7dabd01b4a0c0549b697e006d5f75eb8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Why use a Rube Goldberg machine to write and then read one register?
Change-Id: I282c12f162b5ae69c40729903c09ae81a14c9761
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Files are identical for all southbridges, except bd82x6x. We will take
care of that in subsequent commits.
Change-Id: I38e5d440e188d26f8997bc22a956187b728487ca
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43157
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Files are identical between all three southbridges, and differ for PCH.
Change-Id: Ic6a926af675bda3db3a5795df9e8f490caf3ebf4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43156
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reduces the differences between ACPI for these three southbridges.
Change-Id: If49bad776ebc98cab439f8ea6942471520c476a3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43155
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It does nothing special, so why have it in the first place?
Change-Id: I27aff0ed67e9c69ab78050d35b49f6e26924d31a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43174
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The smm_setup_structures() calls placed GNVS address into
register %ebx. Old code on i82801dx used these low memory
addresses.
Change-Id: I407b9b9fd44db027a62356e2470f6c39ed3bff49
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42426
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of directly reading ABAR without any checking, do like i82801ix
and treat it as a resource. This prevents problems if ABAR is not set.
Change-Id: I4f888b748204860b0a7e1bf5611f5f3e487e8081
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
The `ENABLE_SMBUS_METHODS` symbol is not defined anywhere, so this code
isn't even being tested. So, throw it into the bitbucket before it rots
any further. If anyone needs that code ever again, it's in git history.
Change-Id: I22e3f1ad54e81f811c9660d54f3765f3c6b83f01
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Only two mainboard groups use this southbridge:
emulation/qemu-i440fx: Nothing creates or consumes this ACPI path.
asus/p2b: It only fills the (mostly static) PIIX4E PM/SMBus I/O
resources, which are being declared in DSDT.
It is not doing anything useful and causes ACPI errors in Linux
kernel[1][2], so it has to stop.
[1] https://review.coreboot.org/c/coreboot/+/38601
[2] https://review.coreboot.org/c/coreboot/+/38304
Change-Id: I770047610e02c08191613b57c989b3bc1d464684
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I7b657750b10f98524f011f5254e533217fe94fd8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
No useful implementation existed.
Change-Id: I9a6f9876330fe9f0cdb2925e20f3675fda53d32b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42852
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The table in CBMEM was never allocated with i82801dx.
Change-Id: I4ad97f6504e0f1b22d16210b7dbf5164852cb232
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42851
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I110974f3161f2991536df50acdfe32f68bd2cc60
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42850
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bring all GNVS related initialisation function to global
scope to force identical signatures. Followup work is
likely to remove some as duplicates.
Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit dae95f0dfe9ad94922c940d3c0522d53284b4deb.
There is filename conflict with top-level <gpio.h> and incompatibility
with it. Only use was AMD_PI_KERN and we have no such platform in the
tree anymore.
Change-Id: I120b0bfda1501e9941c71315852d87d251f76a5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42743
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also drop now-redundant definitions and include headers where needed.
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical.
Change-Id: I2fb46bb04d96df5e8261f49e0fd4d88eedca6084
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42659
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also drop now-redundant definitions and include headers where needed.
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical.
Change-Id: I3ddd133a4e81a7f6ce9c33ce227b40006a0d1850
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42658
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The three mainboards using this southbridge do not support it.
Change-Id: I006f1ec26c40f7e2dfc2ddedb017278455368bb9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42655
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical.
Change-Id: Ib4cdeaaaf75818fff21acb628d198781b07aec80
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42654
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical.
Change-Id: I572a9da0cba5d23c48c4cb06de4bb75f65f5b0b0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
|
|
Tested with BUILD_TIMELESS=1, Getac P470 remains identical.
Change-Id: I930de15a6746936fa4a8f6db280b5ac60176c836
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change the order of the assignments to match that of i82801ix. This
changes the binary but the effective result should be the same.
Change-Id: Id720fce40e751295e629585d34017f10af2b5c7c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42651
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
At least i82801ix and i82801jx do this.
Change-Id: I7ff2459d82eb7933ed80180a69f0f323b8ecd25f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical.
Change-Id: I13b972440459a62777ee2a4688d1d8af147d8921
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|