summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Collapse)Author
2008-03-30Like other Intel chipsets, the Intel 3100 has a TCO timer that rebootsEd Swierk
the system automatically unless software resets the timer periodically. The extra reboot extends boot time by several seconds. The attached patch adds a function to the Intel 3100 southbridge code that halts the TCO timer, thus preventing this extra reboot, and calls the function early in the boot process on the Mt. Arvon board. It also fixes a bug in the LPC device initialization -- the ACPI BAR enable flag is bit 7, not bit 4. Signed-off-by: Ed Swierk <eswierk@arastra.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3198 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-29Now coreboot performs IRQ routing for some boards.Nikolay Petukhov
You can see this by executing commands like this: grep -r pci_assign_irqs coreboot/src/* This basically AMD/LX based boards: pcengines/alix1c, digitallogic/msm800sev, artecgroup/dbe61, amd/norwich, amd/db800. Also for AMD/GX1 based boards need a patch [http://www.pengutronix.de/software/ptxdist/temporary-src/references/geode-5530.patch] for the right IRQ setup. AMD/GX1 based boards is: advantech/pcm-5820, asi/mb_5blmp, axus/tc320, bcom/winnet100, eaglelion/5bcm, iei/nova4899r, iei/juki-511p. I have two ideas. 1. Delete duplicate code from AMD/LX based boards. 2. Add IRQ routing for AMD/GX1 boards in coreboot. The pirq.patch for IRQ routing logically consist from of two parts: First part of pirq.patch independent from type chipsets and assign IRQ for ever PCI device. It part based on AMD/LX write_pirq_routing_table() function. Second part of pirq.patch depends of type chipset and set PIRQx lines in interrupt router. This part supports only CS5530/5536 interrupt routers. IRQ routing functionality is included through PIRQ_ROUTE in Config.lb. Tested on iei/juki-511p(cs5530a), iei/pcisa-lx(cs5536) and also on TeleVideo TC7020, see http://www.coreboot.org/pipermail/coreboot/2007-December/027973.html. Signed-off-by: Nikolay Petukhov <nikolay.petukhov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-20Following patch adds K8M890 support. It initializes the AGP and graphics UMA.Rudolf Marek
The V-link setup and HT bridge is redone, because VT8237A has it in another device. So far following combination of chipsets should now work: K8T890CE + VT8237R K8M890(CE) + VT8237R VIA PC1 brige moved to NB code (vt8237r_bridge.c -> k8t890_bridge.c) and notes about K8M890 support were added. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3183 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-19Following patch will setup KT890 HT automatically. It will find theRudolf Marek
max width of the link and also it will take the frequency of K8 HT already done coreboot (and checks if t can run on it). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3169 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-16Here is an updated patch addressing most of Uwe's and Peter's ↵Ed Swierk
comments. Ripping out the ehci/uhci_init() code doesn't seem to have done any harm, and I got rid of a bunch of unused junk in i3100_smbus.h I left the *_set_subsystem() arguments unsigned, as that's how the function is declared in include/device/pci.h. Signed-off-by: Ed Swierk <eswierk@arastra.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3157 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-15Following patch extends the ROM decoding to last 1MB, allowing to use largerRudolf Marek
flashes such as SST49LF080A: 1024K x8 (8 Mbit) Tested on my system, the flash is found and if I use coreboot in second half it works too. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3148 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-03-15Following patch fixes the retrain/reset sequence which caused problem with someRudolf Marek
nVidia cards. The enable link should be enough, retrain is done there. Tested on my system. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-25This trivial patch removes an unused local variable, thus getting rid ofRonald Hoogenboom
a compiler warning. Signed-off-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3115 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-20Route device IRQ through PCI bridge instead in mptable.Yinghai Lu
Don't enable pin0 for ioapic of io-4. 1. apic error in kernel for MB with mcp55+io55 2. some pcie-cards could have pci bridge there, so need to put entries for device under them in mptable. Signed-off-by: Yinghai Lu <yinghailu@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3112 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Rename almost all occurences of LinuxBIOS to coreboot. Stefan Reinauer
Due to the automatic nature of this update, I am self-acking. It worked in abuild. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18Please bear with me - another rename checkin. This qualifies as trivial, noStefan Reinauer
code is changed. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3052 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-19Additional early AMD8111 southbridge support for Barcelona platforms.Marc Jones
Check that the SMBus controller is found and stop on an error. Clean up and add additional path through the 8111 reset functions. Signed-off-by: Marc Jones <marc.jones@amd.com> Reviewed-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Myles Watson <myles@pel.cs.byu.edu> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3015 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-30Improve support for the Intel 82371FB/SB/AB/EB/MB southbridge(s):Uwe Hermann
- Implement ISA related support: - Initialize the RTC - Enable access to all BIOS regions (but _not_ write access to ROM) - Enable ISA (not EIO) support - Without the *_isa.c file, the Super I/O init is never performed - Improve IDE support: - Add config option to enable Ultra DMA/33 for each disk - Add config option to enable legacy IDE port access - Implement hard reset support - Implement USB controller support - Various code cleanups and improvements The code partially supports southbridges other than the 82371EB (but which are very similar), more complete support will follow. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2994 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-29Restructure/rename/comment a few 82371XX-related PCI IDs (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2990 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-201. Fix pirq routing table setting for GA-2761GXDK.Morgan Tsai
2. Southbridge PCIe slots are working correctly now. 3. Disable keyboard & mouse ports for GA-2761GXDK. Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2976 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-15Various cosmetic fixes and improvements (trivial).Uwe Hermann
- Use 'static' where appropriate. - Use 'const' where appropriate. - Indentation fixes. - Add comment wrt init code which is only valid for VT8237R. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2974 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-14* Maintaining SiS south bridge device IDs.Morgan Tsai
* Strip unnecessary driver modules. Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2971 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Add support for FID/VID changes messages.Rudolf Marek
Upon incoming SMAF message from CPU (C3 or FID/VID change), the SB will assert SLP# which is connected to LDTSTOP_L on K8 CPUs. Question is for how long. Imho for 100us. Which is more than plenty (2us required) I will try to justify this once I know what bios to set in SB. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2965 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13Fine-tune the V-link bus between K8T890 and VT8237R and setRudolf Marek
it to 8X transfer rate (up to 1066 MB/s) similar code placed here would be needed for VT8237A/S etc. Using VIA recommended values despite they are for K8T890CF, this is K8T890CE (still dont know what is exactly different). This patch enables the parity error reporting on V-Link, so it enables NMI generation for the SERR# errors. The NMI may not be generated, maybe port 61h needs some tuning too. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2958 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-07Add initial support for all known ICH* southbridges to theUwe Hermann
i82801xx code for the following parts: - AC97 audio/modem - Onboard network interface cards (NICs) - USB 1.1 controllers - SMBus controllers Some other parts are still missing and will be added later. Use PCI ID #defines from pci_ids.h everywhere. Constify various structs. Also, fix some random cosmetic issues in the code. All of this is relatively trivial and tested by manually building all boards which currently use the i82801xx code. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2951 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-07This patch masks the function prototypes in stdlib.h from ROMCC, so thatCorey Osgood
ARRAY_SIZE() can be used on ROMCC-dependent systems. Also adds stdlib.h to vt8237r_early_smbus.c, so it'll build on those systems. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2949 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-07Add PCI IDs for most Intel southbridges of the 82801 seriesUwe Hermann
(ICH/ICH0 up to the ICH9 family) in preparation for further code improvements for the i82801xx southbridge code. Small fixes in the 6300ESB PCI IDs. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2947 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-05* Change one PCI vendor ID from Nvidia to SiSCarl-Daniel Hailfinger
* Remove dead code * Remove unused variables * Fix bug where array was one element too small * Fix error value truncation, the old code never entered the error path * Remove warnings Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2945 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-04Various cosmetics, coding style fixes, constifications (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2939 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-04Restructure the PCI IDs list for the ICH* chipsets from ICH/ICH0 up toUwe Hermann
ICH5/ICH5R (more to follow) in preparation of further 82801xx improvements. Use human-readable names for the PCI ID #defines. Rename *_ISA to *_LPC as per datasheet. The 82801DBM only has 3 (not 4) USB devices, looks like a copy-paste error. The fixes in southbridge code are only to keep the build working for now, any real improvements will only go into the 82801xx code in future. This is abuild-tested so it shouldn't break anything. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2938 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-03This patch is some small changes to the vt8237r to prepare it forCorey Osgood
the Jetway J7F2 patch that should be coming soon, and also moves most defines into vt8237r.h. I've changed some of the values from u32 to u8, because that's all they should ever need to be. Also includes doxygenized comments! Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2937 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-02remaining part of the patch.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2933 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-02Delete a file no longer used by the SiS implementationJordan Crouse
No functional code changes. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2932 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-021. vgabios removed, will go to extra repositoryMorgan Tsai
2. Rename sisnb.c to sis761.c 3. Delete many mis-definition for sis device in src/include/device/pci_ids.h 4. Trim trailing spaces for all files Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2931 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-02trivial fix for the .data problemStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2925 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30Various fixes and improvements of the 82801xx code.Joseph Smith
Signed-off-by: Joseph Smith <joe@smittys.pointclark.net> Acked-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2912 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30Add support for the VIA VT8237R southbridge.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2907 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30fix the readwrite/readonly clashes for the pci_driver structs in the sisStefan Reinauer
code. This is trivial, I did it for the other components before. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2905 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-29Thanks to the great efforts of Morgan Tsai of SiS we support the SiS966Morgan Tsai
southbridge now: From: Morgan Tsai <my_tsai@sis.com> It supports SiS761GX / SiS966 chipset, only for AMD K8 platform so far. Due to integrated VGA sharing system memory, some code in southbridge folder have to init northbridge. Copyright (C) 2007 Morgan Tsai <my_tsai@sis.com> Copyright (C) 2007 Silicon Integrated Systems Corp. (SiS) Change Log: Newly support GIGABYTE GA-2761GXDK CPU type: AMD AM2 socket Northbridge: SiS 761GX Southbridge: SiS 966 SuperIO: ITE8716F Signed-off-by: Morgan Tsai <my_tsai@sis.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2902 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24smaller changes to silence build warnings. (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2893 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-24Ever wondered where those "setting incorrect section attributes forStefan Reinauer
rodata.pci_driver" warnings are coming from? We were packing those structures into a read-only segment, but forgot to mark them const. Despite its size, this is a fairly trivial patch created by a simple search/replace Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2891 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22This patch adds support for K8T890CE northbridge.Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2883 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-07Fix some issues with spaces in the code and Doxygen style documentation.Juergen Beisert
Painting the splash graphic is now ifdef'ed. Signed-off-by: Juergen Beisert <juergen127@kreuzholzen.de> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2836 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-05This patch will add support for the Geode GX1/CS5530 VGA feature. It's ableJuergen Beisert
to set up one of five screen resolutions (sorry no autodetection at runtime, resolution is selected at buildtime) and displays a graphic in the right bottom corner (splash screen). Signed-off-by: Juergen Beisert <juergen127@kreuzholzen.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2827 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-01Thee lines in i82801xx_pci.c need to be removed. They cause theJoseph Smith
i82801DB to reset. See this thread for more info: http://article.gmane.org/gmane.linux.bios/26791 Signed-off-by: Joseph Smith <joe@smittys.pointclark.net> Acked-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2816 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-25As per suggestion from Yinghai Lu <yinghailu@gmail.com> this patchUwe Hermann
fixes the problems with PCI add-on cards not being detected or initialized on MCP55-based systems (PCI bridge decoding change). I have tested this on the MSI MS-7260 (K9N Neo) with a PCI VGA card, which worked fine in any of the three PCI slots. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2807 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-22Fix another, similar typo as in r2800 (trivial).Uwe Hermann
Reported by Robert Millan. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2801 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-22Fix typo which causes build error if CK804_USE_NIC is set (trivial).Uwe Hermann
This is tested with abuild so shouldn't break anything. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2800 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-14More range for HT_CHAIN_UNITID_BASE and HT_CHAIN_END_UNITID_BASE.Yinghai Lu
For example: in C51/MCP55 or C51/MCP51 Will allow 1. C51 at 0x10 to 0x14, and MCP at 0 to 4 2. C51 at 1 to 4, and MCP at 7 to 0x0a The reason is c51/mcp51/mcp55 reported unitid is 0x0f (far beyond it needed), and will prevent us from putting them on bus 0. Typical values for c51/mcp55 or c51/mcp51: HT_CHAIN_UNITID_BASE = 0x10 # for C51 HT_CHAIN_END_UNITID_BASE = 0 # for mcp If only have mcp with c51, HT_CHAIN_UNITID_BASE = 0 # for MCP #HT_CHAIN_END_UNITID_BASE = 0 # default value 0x20 Signed-off-by: Yinghai Lu <yinghai.lu@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2776 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-09-14This is a full rewrite of all the CS5530/CS5530A code. The previous code wasUwe Hermann
mostly undocumented, had a broken coding style, contained lots of dead code and had several other problems, e.g. it enabled write access to the ROM (why?), it unconditionally enabled primary/secondary IDE (which should have a config option) and that even _twice_ (which is um... wrong). The new code - has 'ide0_enable' and 'ide1_enable' config options (which actually work) to enable/disable the primary/secondary IDE interface in Config.lb. - Does _not_ enable write access to the ROM (or is there some good reason to do that? If so, it should at least have a config option). - Contains a bit more documentation. - Uses readable (and documented) #defines instead of hardcoded magic values. - aaand... it actually compiles ;-) Yep, that's right. The previous code wouldn't even build, as it hadn't been fully ported from v1 (still used v1 functions which are simply not available in v2). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2775 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-19Various minor cosmetics and coding style fixes (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2727 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-19The GPIOs used for UART2 RX and TX were reversed.Marc Jones
Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2726 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-14Small bugfix in i82801xx_lpc.c.Corey Osgood
Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2721 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-14This patch adds support for the Intel i82810 northbridge and various i82801xxCorey Osgood
southbridges, along with the Asus MEW-VM. With this, my machine attempts to boot linux, but does so very slowly and fails during the boot process, probably because of the irq tables. Signed-off-by: Corey Osgood <corey.osgood@gmail.com> Acked-by: Joseph Smith <joe@smittys.pointclark.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2719 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-03Intel 82371EB: Some code simplifications (trivial).Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2707 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-06-02The UART disable code was causing a hang and was worked around with aMarc Jones
return that skipped the disable code. This patch removes the return and fixes the UART disable code. The problem was that the disable code was ORing bits into the Legacy_IO MSR causing issues with the LPC SIOs init code that would manifest as a hang because the IO would not be decoded correctly. ANDing to clear the bits fixes the issue. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2706 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-29Intel 82371EB: Add IDE init support.Uwe Hermann
In a mainboard's Config.lb file you can configure whether the primary and/or secondary IDE interfaces shall be enabled. Also, various fixups in the rest of the southbridge code, most notably the early SMBus code, plus some documentation improvements. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Corey Osgood <corey_osgood@verizon.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2703 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-27Init for the Intel 82371EB southbridge: make all ROM/BIOS regionsUwe Hermann
accessible (but not writable), so that reading/loading a payload from that area can work (for instance). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2700 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-24Drop the src/southbridge/amd/cs5536_lx directory and its contents, asUwe Hermann
the new src/southbridge/amd/cs5536 code completely replaces it. The Artecgroup dbe61 board currently uses it, but that is broken anyway at the moment. A fix to use the new CS5536 code for it is being worked on. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2697 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-22Add missing license headers, minor cosmetic fixes in existing headers.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2687 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-10This fix properly hides the UDC and OTG PCI headers when the cs5536 isMarc Jones
setup as the host on USB port4. In client mode the headers remain available. Also fixes an outb to 0x80 to use the post_code() function. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2660 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-10This patch cleans up and clarifies Geode source code comments.Marc Jones
Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2658 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-10This patch updates the PCI ID of the Geode IDE device to include the revision.Marc Jones
Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2656 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-10Fix the indent and whitespace to match LinuxBIOS standardsJordan Crouse
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2651 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-10Add missing licenses to several of the files.Jordan Crouse
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2647 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-05With this patch, the msm800sev runs FILO and boots a kernel.Ronald G. Minnich
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> -This line, and those below, will be ignored-- M cs5536.c git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2637 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-04patch to fix the IDE configuration on EPIA boards. At some point thisBen Hewson
broke and stopped FILO from being able to boot. The fix is a simple one line change plus a comment to src/mainboard/via/epia/auto.c to write to the IDE configuration register 0x42 . This has always been done here, however at some point something broke it. The same register was also being set correctly in ide_init(), however for some reason this does not work. Possibly the register needs to be set before the IDE peripheral is enabled or maybe it is a timing issue. The section of code in ide_init() ( src/southbridge/via/vt8231/vt8231_ide.c ) that does write to register 0x42 has been commented out as it is superfluous and I have added a comment to indicate the reason, should someone at a future date wonder why. I have also changed the default COM speed from 19200 to 115200 in src/mainboard/via/epia/Options.lb There has been mention before about the EPIA board not being able to use 115200 but I have seen no such problems with my board. Signed-off-by: Ben Hewson <ben@hewson-venieri.com> This patch worked for me and allowed me to boot Debian kernel 2.5.16-4-486 on an epia 800 mhz system. It is able to consistently get through the initialization and start init now. However, after that it crashes at various points in the boot process. Acked-by: Alex Mauer <hawke@hawkesnest.net> Note from comitter: I am commiting this, although: 1. it's not the exact right way to fix it up, the chip.h for the sb should change 2. Alex reports problems, which are almost certainly memory issues. But it is as close as we've gotten. I can't test it. Ron Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2633 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-04This patch re-implements support for the CS5536 companion chip for theMarc Jones
AMD GX and LX processors. This aguments the previous code, which was very specific to the OLPC platform with general purpose support and better integration with the VSA and CPUs. Signed-off-by: Marc Jones <marc.jones@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2631 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-05-03Correct the RAM checking code to _not_ check the range from 640 KB - 1 MB,Uwe Hermann
as that is not RAM but used for other stuff. First try at PCI init added to src/mainboard/tyan/s1846/Config.lb. Use a real payload (FILO) per default now. Note: this cannot boot a payload, yet, but it gets a lot further now. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2623 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-04-07Fix epia-m build after u8/u16/u32 changes in Yh Lu's patch.Peter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2597 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-03-17Add initial pre-RAM serial output support for the VIA VT82C686(A/B)Corey Osgood
southbridge (with integrated Super-I/O). Signed-off-by: Corey Osgood <corey_osgood@verizon.net> Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Corey Osgood <corey_osgood@verizon.net> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2571 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-02-19Fix some CHIP_NAME() entries to use canonical names.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2557 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-02-03Nvidia MCP55 uses CMD to send/receive bytes instead of DAT0, bxshi
that's the same as broadcom/bcm5785. Signed-off-by: bxshi <bingxunshi@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2548 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-02-02I have Sun Ultra40 workstation. Southbridge is nVidia CrushK8-04/nforceRoman Kononov
2200 (too many names, sounds like a criminal). 1) Linuxbios loads kernel A; kernel A loads kernel B. Everything works fine. 2) Then I push the reset button. 3) Linuxbios loads kernel A; kernel A loads kernel B. Kernel B complains about wrong checksum of the mptable and crushes later. An investigation showed that in 3), short after kernel A (v2.6.19.2) sets the Bus Master Enable bit of the nVidia's USB1 controller (pci_set_master()), the mptable gets two bytes at physical address 0x80 damaged. Nothing is plugged to the USB ports. Other two Sun workstations had the same behavior. This does not make sense to me unless the controller has a HW bug. I believe, this should better be fixed in the kernel USB driver. For now this patch offers a possibility for linuxbios to reset the USB controller by setting HostControllerReset bit in HcCommandStatus Register. It is enablead by using 'register "usb1_hc_reset"="1"' in 'chip southbridge/nvidia/ck804' section of the mainboard's Config.lb. Signed-off-by: Roman Kononov <kononov195-lbl@yahoo.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2546 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-02-01This patch adds the MCP55 PCI IDs (without which the southbridge codeEd Swierk
won't compile), and breaks an unnecessary dependency on the usbdebug code. Signed-off-by: Ed Swierk <eswierk@arastra.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2543 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-02-01Add support for the NVIDIA MCP55 southbridge.Yinghai Lu
Signed-off-by: Yinghai Lu <yinghai.lu@amd.com> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Yinghai Lu <yinghai.lu@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2540 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-28A patch to add initial support for the i82801db southbridge basedJon Dufresne
heavily on the code for i82801dbm and i82801er Signed-off-by: Jon Dufresne <jon.dufresne@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-20ck804 pref mem 4G above supportYinghai Lu
Signed-off-by: Yinghai Lu <yinghai.lu@amd.com> Acked-by: Yinghai Lu <yinghai.lu@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2532 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-14In the file mainboard/intel/i82801dbm/i82801dbm.c the variableJon Dufresne
southbridge_intel_i82801dbm_control should be named southbridge_intel_i82801dbm_ops. Otherwise a compile error occurs if this device is included in Config.lb of the mainboard. Closes #62 Signed-off-by: Jon Dufresne <jon.dufresne@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2526 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-12-14In src/southbridge/intel/i82801ca, first the smbus registers are mapped at i/ochn
space offset 0x1000, and later is the acpi registers also mapped at 0x1000. This patch fixes this behavior. Closes #44 Signed-off-by: <chn@virtutech.se> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2523 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-05Use the canonical name of the vendors/devices and theUwe Hermann
same format for all CHIP_NAME() entries in LinuxBIOS (Closes #20). Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@linuxbios.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2490 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-11-02Sorry, this is the last commit I will do this way, but MSI has waited abxshi
long time and I could not get into the tracker. These are patches to enable ms9185 support. Abuild passes. Signed-off-by: bxshi <bxshi@msik.com.cn> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2486 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-13s2895 failover buildYinghai Lu
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2455 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-13return missedYinghai Lu
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2454 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-04CONFIG_USE_PRINTK_IN_CAR and ht chain id for HTX support inYinghai Lu
serengeti_cheeatah git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2439 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-10-04AMD Rev F supportYinghai Lu
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-09-20Lots of lx fixes. CLeanup mainly. THings now buildRonald G. Minnich
Signed-off-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2430 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-09-19put this in the right place.Ronald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-09-18add the _lx flavor of the 5536. This will later be merged into the Ronald G. Minnich
cs5536, but I don't want to mess up the OLPC, and we really need the lx support NOW. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-09-13add file for dcon supportJordan Crouse
signed-off-by: Jordan Crouse Signed-off-by: Ronald G. Minnich git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2410 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-09-13fix cardbus interrups (signed off by Nick Barker)Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2408 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-28- Much better USB P4 fix. Richard Smith
This one actualy works. You cannot just go mucking about with stuff that the VSA has under its thumb. Bad Things happen. This does it the VSA way. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-25- USB P4 as host fixRichard Smith
This should make the USB P4 work as a USB host git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-25- fix a silly pointer dereference thinko in my previous commitRichard Smith
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2388 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-25- Added suport for enabling USB P4 on the olpcRichard Smith
USB P4 is disabled by default and we need to setup the mux bits proper to make it work. This is the frame work for that. All thats needed is the right address values git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2387 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-23Uwe Hermann:Stefan Reinauer
here's a patch which replaces all DOS newlines with Unix newlines, and removes some useless $Rev$, $Id$, and $Header$ tags. (part 1) git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2385 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-15this file is already included by auto.c on all targets.Stefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2377 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-04final rename orgy. sorry for the inconvenience. This should fix it againStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2363 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-04ouch. it's 8_2_371. I'll fix it. This commit breaks compilationStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2362 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-08-04rename southbridge i440bx to its actual name i8371ebStefan Reinauer
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2361 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-07-30- Fix some copy bugs and thinkos in the i440bx SMbusRichard Smith
read code. SBbus reads to RAM now work. Yah! - Rename the register constants to something I can look at more easily. - Make the logic flow match the flow from V1 assembly - #if 0 out other SMbus functions that are still broken. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2353 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-07-27"Hey Ron - Attached is a simple patch that enables the upper banks on the Ronald G. Minnich
UART. If the upper banks are enabled, then the Linux 8250 driver knows how to set baud speeds greater then 115200. This was prompted by David Woodhouse. Jordan" git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-07-24add framework for i440bx chipsetRichard Smith
add support for NSC pc87351 SuperIO add Bitworks/IMS manboard config This is a very basic framework for the i440bx chipset and the Bitworks IMS board that uses it. Most things are structure only. Known issues: - SMbus reads to the RAM SPD come back all zero. - dump_spd_registers() is commented out since it breaks with the default setting of generic_dump_spd.c where it wants 2 memory controllers. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2347 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-07-21restore the old code for enabling flash. The new amd code did not work.Ronald G. Minnich
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2346 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2006-07-21These changes incorporate steve goodrich'es fixes, and one bug that isRonald G. Minnich
disabled. cs5536: add new entires for SB control etc. cs5536.c: chip_enabled function moved to chip_init, so it only gets run once. IRQ setup improved gx2def.h: new defines added vr.h: new file, with new def's for virtual register control. mainboard config.lb: new entries added for nb and sb control. chipsetinit.c: new controls added -- I forget all the details :-) grphinit.c: new function added northbridge.c: new IRQ control added. FlashChipSetup added, controlled by chip info setupflash struct member. Currently, if enabled, this hangs OLPC in linux PCI scan. chip.h: new struct members added for unwanted device enable, flash setup git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2345 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 05:39:37 +0000