summaryrefslogtreecommitdiff
path: root/src/southbridge
AgeCommit message (Collapse)Author
2019-02-07src: Remove unused include device/pnp_def.hElyes HAOUAS
Change-Id: Ibb7ce42588510dc5ffb04c950c4c8c64e9a2fa37 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-02-04sb/amd/agesa/hudson/Kconfig: Disable xHCI by default if no USE_BLOBSMike Banon
Disable xHCI by default if USE_BLOBS option has not been selected. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I1c3f0ff49fbe3db3ef095d99055f75d65cd6f661 Reviewed-on: https://review.coreboot.org/c/31216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-02-01sb/intel/common: Rename i2c_block_read() to i2c_eeprom_read()Kyösti Mälkki
Datasheets describe the used command as 'I2C Read' but adding the word 'eeprom' in between should avoid further confusion with other block commands. Followups will add a symmetrical pair of commands i2c_block_read() and i2c_block_write() that operate via I2C_EN bit and have a 32 byte size restriction on block transfers. For some hardware revision these block commands are available, while 'I2C Read' was not. Change-Id: I4494ab2985afc7f737ddacc8d706a5d5395e35cf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-31lib/hardwaremain: Fix more ACPI/IOAPIC typosSubrata Banik
CB:31139 fixs few ACPI type error. Here is few more typo mistake. Change-Id: Ieecf0ba8fe09ed5003d5ae766079b8f83cc891b9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31152 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-30sb/intel/common/firmware: Don't call GbE binary `firmware`Nico Huber
Unless things changed considerably, this file doesn't contain any firmware. It is merely replacing a configuration EEPROM for the MAC address etc. So don't call it firmware. Change-Id: Ife6190639e7f05da2cb6eddeb1b0db0e8ffc8e6e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-25sb/intel/common: Show "Add gigabit ethernet firmware" only for boards that ↵Jan Tatje
need it Hide "Add gigabit ethernet firmware" option for boards that do not use GbE firmware in GbE section. The option is now hidden by default and can be reenabled on a per-board basis by selecting MAINBOARD_USES_IFD_GBE_REGION in the mainboards Kconfig. The following boards seem to use this: mb/roda/rv11 mb/ocp/wedge100s mb/ocp/monolake mb/lenovo/x230 mb/lenovo/x220 mb/lenovo/x201 mb/lenovo/x200 mb/lenovo/t530 mb/lenovo/t520 mb/lenovo/t430s mb/lenovo/t430 mb/lenovo/t420s mb/lenovo/t420 mb/lenovo/t400 mb/kontron/ktqm77 mb/intel/saddlebrook mb/intel/kblrvp mb/intel/dg43gt mb/intel/dcp847ske mb/intel/coffeelake_rvp mb/intel/camelbackmountain_fsp mb/hp/revolve_810_g1 mb/hp/folio_9470m mb/hp/compaq_8200_elite_sff mb/hp/8770w mb/hp/8470p mb/hp/8460p mb/hp/2760p mb/hp/2570p mb/google/sarien mb/facebook/watson mb/compulab/intense_pc mb/asus/maximus_iv_gene-z The boards were identified by looking at devicetree.cb, but this list is possibly still incomplete. Change-Id: Ibfb07902ad93fe5ff2bd4f869abcf6579f7b5a79 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-24sb/intel/common: More SMBus block_cmd_loop()Kyösti Mälkki
Setup to different block transactions are similar enough to have common place to call execute_command() in. Change-Id: I671fed280f47e6bc673eb7506f09ed6ed36d2804 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26763 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24sb/intel/common: SMBus block_cmd_loop()Kyösti Mälkki
For debugging prints, report the number of loop spent polling instead. Change-Id: I61865aaafc9f41acd85c5dc98817d12642965ba4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21121 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-24sb/intel/common: SMBus complete_command()Kyösti Mälkki
Adds helper to test for SMBHSTSTAT flags for hardware having finished or failed a transaction. Change-Id: Idea15e03edde7aeedf198c1529f09c24a5bc0b06 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-24sb/intel/common: SMBus execute_command()Kyösti Mälkki
Implement the common start of transaction. Fixes a problem where smbus_wait_until_active() can miss SMBHSTSTS_HOST_BUSY being set, if transaction completes very fast. Or if we are single-stepping or executing under SerialIce emulation. Change-Id: Icb27d7d6a1c54968950ca292dbae05415f97e461 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-24sb/intel/common: SMBus setup_command()Kyösti Mälkki
Implements the common parts of any SMBus transaction with a stub to log and recover (TBD) from timeout errors. Bits in SMBHSTCTL register are no longer preserved between transactions. Change-Id: I7ce14d3e895c30d595a94ce29ce0dc8cf51eb453 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-23nb/intel/pineview: Use parallel MP initArthur Heymans
Remove guards around CPU code on which all platforms use parallel MP init code. This removes the option to disable HT siblings. Tested on Foxconn D41S. Change-Id: I89f7d514d75fe933c3a8858da37004419189674b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25602 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/x4x: Use parallel MP initArthur Heymans
Use parallel MP init code to initialize all AP's. Also remove guards around CPU code where all platforms now use parallel MP init. This also removes the code required on lapic init path for model_6fx, model_1017x and model_f4x as all platforms now use the parallel MP code. Tested on Intel DG41WV, shaves off about 90ms on a quad core. Change-Id: Id5a2729f5bf6b525abad577e63d7953ae6640921 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25601 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-23nb/intel/i945: Use parallel MP initArthur Heymans
Use the parallel mp init path to initialize AP's. This should result in a moderate speedup. Tested on Intel D945GCLF (1 core 2 threads), still boots fine and is 26ms faster compared to lapic_cpu_init. This removes the option to disable HT siblings. Change-Id: I955551b99e9cbc397f99c2a6bd355c6070390bcb Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-01-23nb/intel/gm45: Use parallel MP initArthur Heymans
This places the parallel mp ops up in the model_1067x dir and is included from other Intel core2 CPU dirs that can use the same code. Tested on Thinkpad X200 on which boot time is reduced by ~35ms. Change-Id: Iac416f671407246ee223075eee1aff511e612889 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/23434 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-22cpu/intel/model_206ax: Use parallel MP initArthur Heymans
This patch adds a few southbridge calls needed for parallel MP init. Moves the smm_relocate() function to smm/gen1/smi.h, since that is where this function is defined now. Tested on Thinkpad X220, shaves off ~30ms on a 2 core, 4 threads CPU. Change-Id: Ia1d547ed4a3cb6746a0222c3e54e94e5848b0dd7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25618 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-21drivers/spi: Add controller protection typeRizwan Qureshi
Some SPI controllers support both READ and WRITE protection add a variable to the protect API for the callers to specify the kind of protection they want (Read/Write/Both). Also, update the callers and protect API implementation. BUG=None BRANCH=None TEST=test that the mrc cache is protected as expected on soraka. Also tried if the read protection is applied correctly. Change-Id: I093884c4768b08a378f21242ac82e430ac013d15 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/30559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-01-17mb/kontron/986lcd-m: Implement disabling ethernet NIC in ramstageArthur Heymans
With the i82801gx code automatically disabling devices ethernet NICs attached to the southbridge PCIe ports can now be disabled during the ramstage. Change-Id: If4163f8101d37cc09c0b51b1be20bf8388ed2b89 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30245 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17sb/intel/i82801gx: Implement PCIe coalescingArthur Heymans
The implementation is a simplified version of the haswell/broadwell code. This also adds a chip option to enable coalescing from the devicetree. Change-Id: I6d7ddef96e4f45e163f7017175398a0938a18273 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
Does not fix 3rdparty/, *.S or *.ld or yet. Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/17656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-14AGESA: Drop CONFIG_CBB and CONFIG_CDBKyösti Mälkki
Static values, copy paste from multi-node fam15 code. Add header that shall have declarations of functions common to different families factored out. Change-Id: I07bc046c74280f49e46793c119d36b87b8789949 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-14AGESA/binaryPI: Drop invalid AMD_AGESA_BOLTONKyösti Mälkki
I refused bolton under agesa/ once it turned out to be blobbed. We have AMD_PI_BOLTON. Change-Id: Ic3cb9ada2d4f14b49f6ad54c58e6b950a1732b70 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-14binaryPI: Fix missing AMD_PI_BOLTON blobsKyösti Mälkki
These were left out by mistake while rebasing, when AGESA/binaryPI directory split happened. Change-Id: Id0cb07e9ad7edede60cd9daa9a4772dc9b893c16 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-14mb/lenovo/[xtz]60: Introduce and use RCBA64 macroPeter Lemenkov
Change-Id: I85ca631dfb01acb92dd1ac38dff07215114cab8c Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/30802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-14sb/intel: Use common RCBA MACROsPeter Lemenkov
This commit follows up on commit 2e464cf3 with Change-Id I61fb3b01ff15ba2da2ee938addfa630c282c9870. Change-Id: Iaf06d347e2da5680816b17f49523ac1a687798ba Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/29236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: David Guckian Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-14AGESA binaryPI: Consolidate ACPI for IMCKyösti Mälkki
Change-Id: Ieff6041f3c9ad02f9cebae0ec83d0898abb0d601 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18538 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-14binaryPI: Remove ACPI for IMC we don't runKyösti Mälkki
IMC is used on some of the AMD reference designs, so do not touch them yet. Change-Id: I6a58ab53d4a800d4c0c2026e50826122ece2c59f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/21190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-01-14AGESA: Remove ACPI for IMC we don't runKyösti Mälkki
IMC is used on some of the AMD reference designs, so do not touch them yet. Change-Id: Iae21e0294f0155f07fb4f4348ebc5b3120d50fd1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/18536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-01-14AGESA/PI: replace HUDSON_DISABLE_IMC with HUDSON_IMC_ENABLEMike Banon
Only a few boards are using IMC for the onboard fan control, so regarding the availability of IMC selection it should be opt-in, not opt-out. Also, select HUDSON_IMC_ENABLE for Gizmo 2 because Gizmo 2 could use IMC for the onboard fan control. Signed-off-by: Mike Banon <mikebdp2@gmail.com> Change-Id: I3590b13c3b155405d61e373daf1bd82ca8e3bd16 Reviewed-on: https://review.coreboot.org/c/30756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-13sb/intel: Check for NULL-return of pcidev_on_root()Nico Huber
In these cases we have to expect a NULL pointer because the IGD device 0:2.0 may be disabled. The behaviour still differs from using dev_find_slot(), which may return a disabled device. Though, if you'd try to read its config space you'd only read garbage (0xff) and in cases where we filled ACPI data with devicetree information, the information shouldn't be interpreted by the OS because of the disabled device. Change-Id: I1bab8fa3a82daca71d03453315cdd69d8951fc24 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30879 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-13aopen/dxplplusu: Switch to C_ENVIRONMENT_BOOTBLOCKKyösti Mälkki
This board is the only user of these ancient chipsets, so we'll do all in one go. Also wipe out some extra headers. Change-Id: I22c172d577e6072562d8fcfa58145ec62473823e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-10sb/nvidia/mcp55: Avoid confusion with PCI_ADDR()Kyösti Mälkki
What you see in the table are not the PCI devices that will be written to. Use a helper MCP55_DEV() to make you look twice what is actually done. Change-Id: I1349af9f734aaabb576d1370ae29a56c91569a7c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10sb/nvidia/ck804: Avoid confusion with PCI_ADDR()Kyösti Mälkki
What you see in the table are not the PCI devices that will be written to. Use a helper CK804_DEV() to make you look twice what is actually done. Change-Id: I0ee244dacd6bbd0a88a5e6a5c634f381b0cf713d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-10sb/intel/common: Show "Add EC firmware" only for boards that need itJan Tatje
Most boards currently do not use EC firmware from SPI flash in the IFD, this hides this option by default and shows it only for boards that need it. A new config variable MAINBOARD_USES_IFD_EC_REGION is introduced to enable this option for boards that need it. The following list of boards requiring this was provided by Lijian Zhao: 1. intel/cannonlake_rvp 2. intel/coffeelake_rvp 3. intel/icelake_rvp 4. google/sarien 5. google/hatch Change-Id: I52ab977319d99a23a5e982cc01479fe801e172a7 Signed-off-by: Jan Tatje <jan@jnt.io> Reviewed-on: https://review.coreboot.org/c/30697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-01-10sb/amd/{cimx,sb{7,8}00}: Use PCI_DEVFN()Elyes HAOUAS
Change-Id: I731fd4ecfab679cd3d830a89bc82c56cf9008bc4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-10southbridge/amd/cimx: Drop unused functionsKyösti Mälkki
Leftovers from attempts of using these with native (non-AGESA) amdfam10/15 support code. Change-Id: I8eaed338438e1de5baee462376e339e1439f72f1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09southbridge/nvidia/ck804: Drop leftover codeKyösti Mälkki
Code was for romcc romstage. Change-Id: If368610651ce950169ef71d9ed768a509c2a5c5c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-09cpu/intel: Use the common code to initialize the romstage timestampsArthur Heymans
The initial timestamps are now pushed on the stack when entering the romstage C code. Tested on Asus P5QC. Change-Id: I88e972caafff5c53d8e68e85415f920c7341b92d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08sb/intel/i82801gx: Autodisable functions based on devicetreeArthur Heymans
This removes the need to synchronize the devicetree and the romstage writing to FD. Change-Id: I83576599538a02d295fe00b35826f98d8c97d1cf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30244 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-07intel/lynxpoint: Fix spellingKyösti Mälkki
Change-Id: I684e1962a9d4312ee9fad4ada70323b02ca3ae48 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-07sb/intel/fsp_rangeley: Fix typo in GPIO LevelElyes HAOUAS
Change-Id: I83886820b8c1acceb2007b694361fe8c30c34f7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Guckian
2019-01-07sb/intel/bd82x6x: Fix typo in GPIO LevelArthur Heymans
Change-Id: I5e24120ca788ace8b61f8a7aee177c7247d30de2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-07src: Use "foo **bar" instead of "foo ** bar"Elyes HAOUAS
Change-Id: I8260424ee243c06827f2b5939e1568e52539b282 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-01-07src: Move constant to the right side of comparisonElyes HAOUAS
Change-Id: I76d35a3643600f81a6da7e0af99c935ebd1c2fc7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/27015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-06Kconfig: Unify power-after-failure optionsNico Huber
The newest and most useful incarnation was hiding in soc/intel/common/. We move it into the Mainboard menu and extend it with various flags to be selected to control the default and which options are visible. Also add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the boolean to int conversion into Kconfig: 0 - S5 1 - S0 2 - previous state This patch focuses on the Kconfig code. The C code could be unified as well, e.g. starting with a common enum and safe wrapper around the get_option() call. TEST=Did what-jenkins-does with and without this commit and compared binaries. Nothing changed for the default configurations. Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06usbdebug: Make the EHCI debug console work in the bootblockArthur Heymans
Currently this needlessly initializes the hardware in the both the romstage and the bootblock, but it works. Build option is renamed to USBDEBUG_IN_PRE_RAM to reflect the use better, related support files can be built to pre-ram stages regardless of usbdebug being enabled or not. Tested on Google/peppy (adapted to C_ENVIRONMENT_BOOTBLOCK). Change-Id: Ib77f2fc7f3d8fa524405601bae15cce9f76ffc6f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-06usbdebug: Refactor init callsKyösti Mälkki
Expose the function that can unconditionally re-initialise EHCI debug host and gadget. Given the missing header in soc/intel files that prevented building with USBDEBUG_IN_ROMSTAGE=y, it is not actually known if those SOCs work at all for usbdebug. Change-Id: I8ae7e144a89a8f7e5f9d307ba4e73d4f96401a79 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-06device: Use pcidev_path_behind()Kyösti Mälkki
Change-Id: Iac16f9412d0e6aac908d873c61a4de3935e5318a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26518 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06device: Use pcidev_path_on_root()Kyösti Mälkki
Change-Id: I2e28b9f4ecaf258bff8a062b5a54cb3d8e2bb9b0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-06device: Use pcidev_on_root()Kyösti Mälkki
Change-Id: Icf34b39d80f6e46d32a39b68f38fb2752c0bcebc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-04AGESA: Use pcidev_on_root()Kyösti Mälkki
We have constant CONFIG_CBB==0, replace ill dev_find_slot() with safe pcidev_on_root(); Change-Id: Ieb2030fa3d77a9f49fc5faf12b92b5f00f49d354 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26482 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04binaryPI: Use pcidev_on_root()Kyösti Mälkki
We have constant CONFIG_CBB==0, replace ill dev_find_slot() with safe pcidev_on_root(); Change-Id: If536adf11aacef8faa3455692285552f97531df9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/26483 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-04amdfam10 boards: Drop AMD_SB_CIMXKyösti Mälkki
Copy-paste, boards do not set this. Change-Id: I4c0795a483948b1e357388a5ad639c3f1950bbc8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-04device: Replace ugly cases of dev_find_slot()Kyösti Mälkki
These few cases lacked a proper devfn parameter in the form of PCI_DEVFN(dev, fn). Change-Id: Iad0b214df12dee65360d07e887a960b0c73a3e4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/26481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-01-03sb/intel/*: Use common files for PCIe ACPIArthur Heymans
The result is that i82801{g,i,j}x now use the correct _PRT table for their root port number. Change-Id: I92bba3c669f3e6a44a42e19a88a33dfcfc2b9b42 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-03sb/intel/bd82x6x: Move pcie ACPI code to a common placeArthur Heymans
Change-Id: I45144f9c397ff9a0be011990ba33db9ffef351e7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-01-03sb/intel/lynxpoint/pcie.c: Add more checks for NULL pointersTristan Corrick
If PCIe root port `n` is disabled, then `rpc.ports[n - 1]` remains NULL. The existing Lynx Point systems probably don't end up dereferencing NULL pointers this way. However, it might occur on a system using Flexible I/O to remap PCIe root ports to other functions. Tested on an ASRock H81M-HDS and an Acer C720 (Google Peppy). No issues presented themselves. Change-Id: I2c22fa36217766c2c4d6e8046f99989063066b16 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30079 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-03sb/intel/lynxpoint: Remove incomplete SATA ACPI codeTristan Corrick
The existing SATA ACPI code for Lynx Point implements some methods and devices, but not completely. These methods are optional and only used in IDE mode. The code was likely copied from bd82x6x, where it has since been removed. As a result, many remarks produced by iasl about unreferenced objects are eliminated. Tested on an ASRock H81M-HDS and an Acer C720. No issues with SATA were observed. Change-Id: I808a9dff7b9ba34239ffd95fa4cb9b39b10c4b62 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30149 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-30soc/intel: Fix ugly preprocessor macroKyösti Mälkki
Macro hides that dev_find_slot() takes two arguments. Change-Id: I639af31b9d4a2d702dfd2baebddbb8352e8bf9b9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2018-12-29sb/intel/bd828x6x: Make CONFIG_ELOG=y compileArthur Heymans
The function pch_log_state() was overlooked when making the smi relocation code common. Change-Id: I878772f1a93105b828e50f37e105d04988ba0bdf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-28sb/intel/lynxpoint: Handle H81 only having 6 PCIe root portsTristan Corrick
The H81 chipset is the only non-LP Lynx Point chipset with 6 PCIe root ports, all others have 8 [1]. The existing PCIe code assumed that all non-LP chipsets had 8 root ports, which meant that port 6 would not be considered the last root port on H81, so `root_port_commit_config()` would not run. Ultimately, while PCIe still worked on H81, all the root ports would remain enabled, even if disabled in the devicetree. Also, remove `PCI_DEVICE_ID_INTEL_LYNXPOINT_MOB_DESK_{MIN,MAX}`, as they are unused, and the MAX constant is incorrect. Interestingly, this fixes an issue where GRUB is unable to halt the system. Tested on an ASRock H81M-HDS. The root ports disabled in the devicetree do indeed end up disabled. [1] Intel® 8 Series/C220 Series Chipset Family Platform Controller Hub (PCH) Datasheet, revision 003, document number 328904. Change-Id: If3ce217e8a4f4ea4e111e4525b03dbbfc63f92b0 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30077 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-24sb/amd/cimx/sb800/ramtop: Fix coding style issuesPaul Menzel
Let GNU indent 2.2.11 fix the coding style issue with `indent -linux …`. Change-Id: Ia2d48906bbeb5ec2f3bea6a93fd2a06aa76b29d9 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/c/19458 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-12-21cpu/amd/geode_lx: Drop supportArthur Heymans
These chips are still using LATE_CBMEM which was agreed upon to be removed after release 4.7. It is now more than 1 year later and they still linger around. The work and review to bring this code up to date can happen on the 4.9 branch and then squashed together and merged back into mainline when done. Change-Id: I11290a5e92397b9b7e7e5a19b029278e728671a3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-19sb/intel/lynxpoint: Don't force state keep after power failTristan Corrick
The deleted line crept in with commit 562db3bb3fa1 ("libpayload: find source of input characters"). Tested on an ASRock H81M-HDS with `power_on_after_fail` set to `Disable` via CMOS. After this patch, the system no longer powers on as soon as power is restored after a power failure. Change-Id: Ie9d9dab9885b285db1c5094c2c8d62aae551f1e7 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-19southbridge: Remove useless include <device/pci_ids.h>Elyes HAOUAS
Change-Id: Ia640131479d4221ccd84613033f28de3932b8bff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-12-18southbridge: Remove unneeded include <pc80/mc146818rtc.h>Elyes HAOUAS
Change-Id: Ic3f7d4d570cb5e343a9cf616e6e71935f9522b0a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-18Fix typos involving "the the"Jonathan Neuschäfer
Change-Id: I179264ee6681a7ba4488b9f1c6bce1a19b4e1772 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-07sb/amd/pi/hudson: Fix UART address mathMarshall Dawson
Correct a build error that occurs when HUDSON_UART is selected. Replace sizeof() of a nonexistent variable with the intended type. This was introduced in bd48b23 "southbridge//hudson: Get rid of void pointer math". BUG=b:118484178 TEST=Build Bettong with Chipset/"UART controller for Kern" Change-Id: Icc0ff9d80c3f5cab9ab837cf1cd0cd8eb0753284 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/30072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-12-07sb/intel/lynxpoint/pcie.c: Fix a mistake in a commentTristan Corrick
The code annotated by the comment is dealing with root port 7, so update the comment to reflect that. It looks like the comment was copied from the root port 3 case, but not updated. Change-Id: I0e27e4453f4c3b2b1b9dffb0c89b71373c6b303e Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-07src/southbridge: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ib4db9c263ff156966926f9576eed7e3cfb02e78a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30045 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-05sb/intel: Fix pointer castsPatrick Rudolph
Fix some compiler warnings due to pointer to integer conversions with different size. Required for 64bit ramstage. Change-Id: Ibfb3cacf25adfb4a242d38e4ea290fdc3929a684 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/29875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-12-05sb/intel/i82801{g,j}x: Remove unused smi.c filesArthur Heymans
Now that all targets featuring these southbridges use SMM_TSEG these files are unused. Change-Id: Ic3a1d790f3595e98a8d33e6e8274cb72ad356a89 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30018 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-05elog: make elog's SMM handler code follow everything elsePatrick Georgi
Instead of ELOG_GSMI_APM_CNT use APM_CNT_ELOG_GSMI and define it in cpu/x86/smm.h Change-Id: I3a3e2f823c91b475d1e15b8c20e9cf5f3fd9de83 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/30022 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03sb/intel/i82801jx: Fix the x_pm2_cnt_blk addrlArthur Heymans
Removes a warning in Linux about FACP. Change-Id: Ia12302a4dcd34eacdcc8ae16bd39e951e616c6ea Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-03sb/intel/lynxpoint: Move `HAVE_SMI_HANDLER` to southbridge KconfigTristan Corrick
All Lynx Point board select this, and none build without it. Change-Id: I4b59b10ee985cff5a8e1442677d36b0be88cf437 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/common: Create a common PCH finalise implementationTristan Corrick
The common finalise code is used by bd82x6x, Lynx Point, and Ibex Peak. Lynx Point now benefits from being able to write-protect the flash chip. For Lynx Point, writing the SPI OPMENU now happens in ramstage, as done in bd82x6x. Tested on an ASRock H81M-HDS (Lynx Point). When write-protection is configured, flashrom reports all flash regions as read-only, and does not manage to alter the contents of the flash chip. Also tested on an ASUS P8H61-M LX (Cougar Point). Everything seems to work as before. Change-Id: I781082b1ed507b00815d1e85aec3e56ae5a4bef2 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/lynxpoint: Ensure the finalise handler is calledTristan Corrick
The finalise handler is not called during S3 resume when using the `BS_PAYLOAD_BOOT` approach. So, adopt the `lpc_final` approach used by bd82x6x and others. Tested on an ASRock H81M-HDS. The finalise handler is now called on the normal boot path, and during S3 resume. Change-Id: I9766a8dcbcb38420e937c810d252fef071851e92 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/lynxpoint: Make the finalise handler commonTristan Corrick
The ASRock H81M-HDS doesn't implement a finalise handler. To fix this, and reduce code duplication in the process, make a common implementation. There should be no functional change to boards with existing finalise handlers, since the code is identical among them and the new, common implementation. Tested on an ASRock H81M-HDS. The finalise handler works. Change-Id: I13b581a2219288019a4e0c9e618db3ac7c3c15ab Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/29975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-12-03sb/intel/lynxpoint/usb_{e,x}hci.c: Don't use device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: Ie75450c844e2317ded157465eb0fc6a9ec1b3ab0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29932 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03sb/intel/i82801gx: Clean up unneeded smi setup codeArthur Heymans
All i82801gx targets now use SMM_TSEG. Change-Id: Ib4e6974088a685290ed1dddf5228a99918744124 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-03nb/intel/x4x: Use common code for SMM in TSEGArthur Heymans
This also caches the TSEG region and therefore increases MTRR usage a little in some cases. Currently SMRR msr's are not set on model_1067x and model_6fx since this needs the MSRR enable bit and lock set in IA32_FEATURE_CONTROL. This will be handled properly in the subsequent parallel mp init patchset. Tested on Intel DG41WV, resume from S3 still works fine. Change-Id: I317c5ca34bd38c3d42bf0d4e929b2a225a8a82dc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25597 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03nb/intel/i945: Use common SMM_TSEG codeArthur Heymans
Use the common SMM_TSEG code to relocate the smihandler to TSEG. This also caches the TSEG region and therefore increases MTRR usage a little in some cases. This fixes S3 resume being broken introduced by CB:25594 "sb/intel/i82801gx: Use common Intel SMM code". Currently SMRR msr's are not set on model_1067x and model_6fx since this needs the MSRR enable bit and lock set in IA32_FEATURE_CONTROL. This will be handled properly in the subsequent parallel mp init patchset. Tested on Intel d945gclf and Lenovo Thinkpad X60. Change-Id: I0e6374746c3df96ce16f1c4a177af12747d6c1a9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25595 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-03sb/intel/i82801jx: Use common Intel SMM codeArthur Heymans
Use the common Intel code to set up smm and the smihandler. This is expected to break S3 resume and other smihandler related functionality as this code is meant to be used with CONFIG_SMM_TSEG. The platform (x4x) using this southbridge will adapt the CONFIG_SMM_TSEG codepath in subsequent patches. Change-Id: Id3b3b3abbb3920d68d77fd7db996a1dc3c6b85a3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25596 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-29arch/acpi.h: Add some update to version 6.2aElyes HAOUAS
Some tables updated to comply with ACPI version 6.2a. Change-Id: I91291c8202d1562b720b9922791c6282e572601f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-11-28sb/amd/sb800: Remove unused smbus_delay() functionElyes HAOUAS
Change-Id: I08ed67dd7159f8a407d61c9b5fc69ff6aef10057 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29843 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-28src/{mainboard,southbridge}: Remove commented include linesElyes HAOUAS
Change-Id: Ie06ae528ade3e06ae880b488628692ce43c30f5a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29845 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-28sb/intel/common: Fix style issue in spi.cElyes HAOUAS
Change-Id: I6b9e0e0c643f9b47cfe8bdfffbe247f477ace685 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27sb/intel/i82801gx: Use common Intel SMM codeArthur Heymans
Use the common Intel code to set up smm and the smihandler. This is expected to break S3 resume and other smihandler related functionality as this code is meant to be used with CONFIG_SMM_TSEG. Platforms (i945, pineview, x4x) using this southbridge will adapt the CONFIG_SMM_TSEG codepath in subsequent patches. Tested on Intel D945GCLF, still boots fine but breaks S3 resume support because it hangs on SMI. Change-Id: If7016a3b98fc5f14c287ce800325084f9dc602a0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-26sb/intel/common: Fix style issue in spi.cPatrick Georgi
Change-Id: Ife8f7f164b26bea65a0dcde0cab339a1bb599e38 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/29834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan T <stefan.tauner@gmx.at> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-11-26sb/intel/spi: read FLCOMP descriptor early and cache itStefan Tauner
Change-Id: I4e5fe3ff083f2d0db1cfde16550b57537d5f7262 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/c/28349 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23sb/intel/bd82x6x/early_usb.c: Fix formattingElyes HAOUAS
Remove whitespace between the function name and open parenthesis, and fix 81+ characters lines. Unnecessary comment about 'include sandybridge.h'removed. Change-Id: I0db1263ec11240003fe1f7080c758994fc0224d3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29428 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-22sb/intel/common: Reset Pre-OP after atomic SPI cycle is finishedWerner Zeh
Make sure that the Pre-Op register is cleared when an atomic cycle has been finished without errors. Change-Id: Ied88337125b125474b411e2f39f668171d15bfac Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-11-19northbridge/intel/fsp_*: Remove legacy SoCszaolin
* Remove FSP Sandy/Ivybrige which are unused. * Open Source implementation isn't final but good enough to replace FSP version. * For new ports use NORTHBRIDGE_INTEL_IVYBRIDGE and NORTHBRIDGE_INTEL_SANDYBRIDGE Change-Id: I7b6bc4bfdd0481c8fe5b2b3d8f8b2eb9aa3c3b9e Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/29402 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-18sb/amd/{agesa,pi}/hudson/Kconfig: Remove unused HUDSON_FWMElyes HAOUAS
Change-Id: Ib621fe01a1d1d026153124a9d46f26e31df6d818 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16{soc,sb}/amd: Remove unused SOUTHBRIDGE_AMD_*_SKIP_ISA_DMA_INITElyes HAOUAS
Change-Id: Ic9bca9a56663926a153b93c298f69ba7d26f6e5e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2018-11-16src: Remove unneeded include <cbmem.h>Elyes HAOUAS
Change-Id: I89e03b6def5c78415bf73baba55941953a70d8de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29302 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <cbfs.h>Elyes HAOUAS
Change-Id: Iab0bd1c5482331a0c048a05ab806bf5c4dbda780 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29303 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16sb/intel/lynxpoint: Generate the ACPI FADT with a common functionTristan Corrick
The function `acpi_fill_fadt()` is based on that of sb/intel/bd82x6x. Tested on an ASRock H81M-HDS and a Google Peppy board, both using Linux 4.9 with `acpi=strict`. No ACPI errors or warnings appear in the kernel log. System reset, poweroff, and S3 suspend/resume continue to work. General improvements -------------------- - `fadt->preferred_pm_profile` is set based on the value of `CONFIG_SYSTEM_TYPE_LAPTOP` instead of being hardcoded. - Constants are used instead of magic values in more locations. - `fadt->gpe0_blk`, `fadt->gpe0_blk_len`, and `fadt->x_gpe0_blk` are set appropriately depending on whether the system uses Lynx Point LP or not. - Boards can indicate docking support in the FADT via the devicetree. Changes to existing Lynx Point boards ------------------------------------- - `header->asl_compiler_revision` changes from 1 to 0. - `fadt->model` is left at 0 instead of being set to 1. This field is only needed for ACPI 1.0 compatibility. - `fadt->flush_size` and `fadt->flush_stride` are set to 0. This is because their values are ignored, since `ACPI_FADT_WBINVD` is set in `fadt->flags`. - `fadt->duty_offset` is set to 0 instead of 1. None of the existing boards indicate support for changing the processor duty cycle (as `fadt->duty_width` is set to 0), so `fadt->duty_offset` does not currently need to be set. - Access sizes of registers are set. - On mb/intel/baskingridge, the pmbase is now read using the common function `get_pmbase()` instead of `pci_read_config16(...)`. - On mb/intel/baskingridge, the value of `fadt->x_gpe0_blk.bit_width` changes from 64 to 128. The correct value should be 128 (bits), to match `fadt->gpe0_blk_len`, which is set to 16 (bytes). - On Lynx Point LP systems, the unused extended address `fadt->x_gpe0_blk` sets its address space ID to be consistent with other unused extended addresses. Such a change should not alter the interpretation of the registers as being unused. Why not set them all to zero? Simply because the existing practice, in both coreboot and some other vendors' firmware, has them set in such a case. A diff of the FADT from a Google Peppy board is below: --- pre/facp.dsl 2018-10-30 20:14:52.676570798 +1300 +++ post/facp.dsl 2018-10-30 20:15:06.904381436 +1300 @@ -1,179 +1,179 @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20180810 (64-bit version) * Copyright (c) 2000 - 2018 Intel Corporation * - * Disassembly of facp.dat, Tue Oct 30 20:14:52 2018 + * Disassembly of facp.dat, Tue Oct 30 20:15:06 2018 * * ACPI Data Table [FACP] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)] [004h 0004 4] Table Length : 000000F4 [008h 0008 1] Revision : 04 -[009h 0009 1] Checksum : 61 +[009h 0009 1] Checksum : 6E [00Ah 0010 6] Oem ID : "CORE " [010h 0016 8] Oem Table ID : "COREBOOT" [018h 0024 4] Oem Revision : 00000000 [01Ch 0028 4] Asl Compiler ID : "CORE" -[020h 0032 4] Asl Compiler Revision : 00000001 +[020h 0032 4] Asl Compiler Revision : 00000000 [024h 0036 4] FACS Address : 7BF46240 [028h 0040 4] DSDT Address : 7BF46280 -[02Ch 0044 1] Model : 01 +[02Ch 0044 1] Model : 00 [02Dh 0045 1] PM Profile : 02 [Mobile] [02Eh 0046 2] SCI Interrupt : 0009 [030h 0048 4] SMI Command Port : 000000B2 [034h 0052 1] ACPI Enable Value : E1 [035h 0053 1] ACPI Disable Value : 1E [036h 0054 1] S4BIOS Command : 00 [037h 0055 1] P-State Control : 00 [038h 0056 4] PM1A Event Block Address : 00001000 [03Ch 0060 4] PM1B Event Block Address : 00000000 [040h 0064 4] PM1A Control Block Address : 00001004 [044h 0068 4] PM1B Control Block Address : 00000000 [048h 0072 4] PM2 Control Block Address : 00001050 [04Ch 0076 4] PM Timer Block Address : 00001008 [050h 0080 4] GPE0 Block Address : 00001080 [054h 0084 4] GPE1 Block Address : 00000000 [058h 0088 1] PM1 Event Block Length : 04 [059h 0089 1] PM1 Control Block Length : 02 [05Ah 0090 1] PM2 Control Block Length : 01 [05Bh 0091 1] PM Timer Block Length : 04 [05Ch 0092 1] GPE0 Block Length : 20 [05Dh 0093 1] GPE1 Block Length : 00 [05Eh 0094 1] GPE1 Base Offset : 00 [05Fh 0095 1] _CST Support : 00 [060h 0096 2] C2 Latency : 0001 [062h 0098 2] C3 Latency : 0057 -[064h 0100 2] CPU Cache Size : 0400 -[066h 0102 2] Cache Flush Stride : 0010 -[068h 0104 1] Duty Cycle Offset : 01 +[064h 0100 2] CPU Cache Size : 0000 +[066h 0102 2] Cache Flush Stride : 0000 +[068h 0104 1] Duty Cycle Offset : 00 [069h 0105 1] Duty Cycle Width : 00 [06Ah 0106 1] RTC Day Alarm Index : 0D [06Bh 0107 1] RTC Month Alarm Index : 00 [06Ch 0108 1] RTC Century Index : 00 [06Dh 0109 2] Boot Flags (decoded below) : 0003 Legacy Devices Supported (V2) : 1 8042 Present on ports 60/64 (V2) : 1 VGA Not Present (V4) : 0 MSI Not Supported (V4) : 0 PCIe ASPM Not Supported (V4) : 0 CMOS RTC Not Present (V5) : 0 [06Fh 0111 1] Reserved : 00 [070h 0112 4] Flags (decoded below) : 00008CAD WBINVD instruction is operational (V1) : 1 WBINVD flushes all caches (V1) : 0 All CPUs support C1 (V1) : 1 C2 works on MP system (V1) : 1 Control Method Power Button (V1) : 0 Control Method Sleep Button (V1) : 1 RTC wake not in fixed reg space (V1) : 0 RTC can wake system from S4 (V1) : 1 32-bit PM Timer (V1) : 0 Docking Supported (V1) : 0 Reset Register Supported (V2) : 1 Sealed Case (V3) : 1 Headless - No Video (V3) : 0 Use native instr after SLP_TYPx (V3) : 0 PCIEXP_WAK Bits Supported (V4) : 0 Use Platform Timer (V4) : 1 RTC_STS valid on S4 wake (V4) : 0 Remote Power-on capable (V4) : 0 Use APIC Cluster Model (V4) : 0 Use APIC Physical Destination Mode (V4) : 0 Hardware Reduced (V5) : 0 Low Power S0 Idle (V5) : 0 [074h 0116 12] Reset Register : [Generic Address Structure] [074h 0116 1] Space ID : 01 [SystemIO] [075h 0117 1] Bit Width : 08 [076h 0118 1] Bit Offset : 00 -[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy] +[077h 0119 1] Encoded Access Width : 01 [Byte Access:8] [078h 0120 8] Address : 0000000000000CF9 [080h 0128 1] Value to cause reset : 06 [081h 0129 2] ARM Flags (decoded below) : 0000 PSCI Compliant : 0 Must use HVC for PSCI : 0 [083h 0131 1] FADT Minor Revision : 00 [084h 0132 8] FACS Address : 000000007BF46240 [08Ch 0140 8] DSDT Address : 000000007BF46280 [094h 0148 12] PM1A Event Block : [Generic Address Structure] [094h 0148 1] Space ID : 01 [SystemIO] [095h 0149 1] Bit Width : 20 [096h 0150 1] Bit Offset : 00 -[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy] +[097h 0151 1] Encoded Access Width : 02 [Word Access:16] [098h 0152 8] Address : 0000000000001000 [0A0h 0160 12] PM1B Event Block : [Generic Address Structure] [0A0h 0160 1] Space ID : 01 [SystemIO] [0A1h 0161 1] Bit Width : 00 [0A2h 0162 1] Bit Offset : 00 [0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy] [0A4h 0164 8] Address : 0000000000000000 [0ACh 0172 12] PM1A Control Block : [Generic Address Structure] [0ACh 0172 1] Space ID : 01 [SystemIO] [0ADh 0173 1] Bit Width : 10 [0AEh 0174 1] Bit Offset : 00 -[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy] +[0AFh 0175 1] Encoded Access Width : 02 [Word Access:16] [0B0h 0176 8] Address : 0000000000001004 [0B8h 0184 12] PM1B Control Block : [Generic Address Structure] [0B8h 0184 1] Space ID : 01 [SystemIO] [0B9h 0185 1] Bit Width : 00 [0BAh 0186 1] Bit Offset : 00 [0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy] [0BCh 0188 8] Address : 0000000000000000 [0C4h 0196 12] PM2 Control Block : [Generic Address Structure] [0C4h 0196 1] Space ID : 01 [SystemIO] [0C5h 0197 1] Bit Width : 08 [0C6h 0198 1] Bit Offset : 00 -[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy] +[0C7h 0199 1] Encoded Access Width : 01 [Byte Access:8] [0C8h 0200 8] Address : 0000000000001050 [0D0h 0208 12] PM Timer Block : [Generic Address Structure] [0D0h 0208 1] Space ID : 01 [SystemIO] [0D1h 0209 1] Bit Width : 20 [0D2h 0210 1] Bit Offset : 00 -[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy] +[0D3h 0211 1] Encoded Access Width : 03 [DWord Access:32] [0D4h 0212 8] Address : 0000000000001008 [0DCh 0220 12] GPE0 Block : [Generic Address Structure] -[0DCh 0220 1] Space ID : 00 [SystemMemory] +[0DCh 0220 1] Space ID : 01 [SystemIO] [0DDh 0221 1] Bit Width : 00 [0DEh 0222 1] Bit Offset : 00 [0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy] [0E0h 0224 8] Address : 0000000000000000 [0E8h 0232 12] GPE1 Block : [Generic Address Structure] [0E8h 0232 1] Space ID : 01 [SystemIO] [0E9h 0233 1] Bit Width : 00 [0EAh 0234 1] Bit Offset : 00 [0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy] [0ECh 0236 8] Address : 0000000000000000 Change-Id: I9638bb5ff998518eb750e3e7e85b51cdaf1f070e Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29387 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16src: Remove unneeded include <lib.h>Elyes HAOUAS
Change-Id: I801849fb31fe6958e3d9510da50e2e2dd351a98d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-16src: Remove unneeded include <console/console.h>Elyes HAOUAS
Change-Id: I40f8b4c7cbc55e16929b1f40d18bb5a9c19845da Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 02:44:22 +0000