summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2021-12-06soc/intel/common: Refactor cpu_set_p_state_to_max_non_turbo_ratioSridhar Siricilla
The patch refectors cpu_set_p_state_to_max_non_turbo_ratio(). The function is updated to use cpu_get_max_non_turbo_ratio(). TEST=Build the code for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: If73df17faaf7b870ae311460a868d52352683c0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/intel/common: Add CPU related APIsSridahr Siricilla
The patch defines below APIs : cpu_is_hybrid_supported() : Check whether CPU is hybrid CPU or not. cpu_get_bus_frequency() : Get CPU's bus frequency in MHz cpu_get_max_non_turbo_ratio() : Get CPU's max non-turbo ratio cpu_get_cpu_type() : Get CPU type. The function must be called if executing CPU is hybrid. TEST=Verified the APIs on the Brya board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I680f43952ab4abce6e342206688ad32814970a91 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-06soc/intel: Move enum pcie_rp_type to intelblocks/pcie_rp.hTim Wawrzynczak
This enum is useful to have around for more than just the one file, so move it to a common header file, and while we're there, also add an option for UNKNOWN. TEST=boot test on brya0 Change-Id: I9ccf0ed9504dbf6c60e521a45ea4b916d3dcbeda Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-12-03soc/intel/adl: Add override skip_cse_sub_part_update() for alderlakeKrishna Prasad Bhat
Check the Alderlake CPU ID to determine if cse sub-paritition update is required or not. BUG=b:202143532 Change-Id: Icae21dad56ed4a1edea1f641b3d5bccc3943f831 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/common: Add support for CSE IOM/NPHY sub-parition updateKrishna Prasad Bhat
This patch adds the following support to coreboot 1. Kconfig to add IOM/NPHY in the COREBOOT/FW_MAIN_A/FW_MAIN_B partition of BIOS 2. Helper functions to support update. Pre-requisites to enable IOM/NPHY FW Update: 1. NPHY and IOM blobs have to be added to added COREBOOT, FW_MAIN_A and FW_MAIN_B through board configuration files. CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE: IOM blob Path SOC_INTEL_CSE_NPHY_CBFS_FILE: NPHY blob path 2. Enable CONFIG_CSE_SUB_PARTITION_UPDATE to enable CSE sub-partition NPHY/IOM update. coreboot follows below procedure to update NPHY and IOM: NPHY Update: 1. coreboot will navigate through the CSE region, identify the CSE’s NPHY FW version and BIOS NPHY version. 2. Compare both versions, if there is a difference, CSE will trigger an NPHY FW update. Otherwise, skips the NPHY FW update. IOM Update: 1. coreboot will navigate through the CSE region, identify CSE's IOM FW version and BIOS IOM version. 2. Compares both versions, if there is a difference, coreboot will trigger an IOM FW update.Otherwise, skip IOM FW update. Before coreboot triggers update of NPHY/IOM, BIOS sends SET BOOT PARTITION INFO(RO) to CSE and issues GLOBAL RESET commands if CSE boots from RW. coreboot updates CSE's NPHY and IOM sub-partition only if CSE boots from CSE RO Boot partition. Once CSE boots from RO, BIOS sends HMRFPO command to CSE, then triggers update of NPHY and IOM FW in the CSE Region(RO and RW). coreboot triggers NPHY/IOM update procedure in all ChromeOS boot modes(Normal and Recovery). BUG=b:202143532 BRANCH=None TEST=Build and verify CSE sub-partitions IOM and NPHY are getting updated with CBFS IOM and NPHY blobs. Verified TBT, type-C display, NVMe, SD card, WWAN, Wifi working after the update. Change-Id: I7c0cda51314c4f722f5432486a43e19b46f4b240 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/common: Add check before sending HMRFPO_ENABLE commandSridhar Siricilla
This patch adds a check to determine if the CSE's current operation mode is ME_HFS1_COM_SECOVER_MEI_MSG or not before sending HMRFPO_ENABLE command to CSE. If CSE is already in the ME_HFS1_COM_SECOVER_MEI_MSG, coreboot skips sending HMRFPO_ENABLE command to CSE to unlock the CSE RW partition. TEST=Verify sending HMRFPO_ENABLE command on Brya system. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I387ac7c7296ab06b9bb440d5d40c3286bf879d3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/common: Rename compare_cse_version() function nameSridhar Siricilla
The patch renames the compare_cse_version() function to the cse_compare_sub_part_version(). It makes the function generic so that it can be used to compare version of any CSE sub-partition like IOM, NPHY etc. TEST=Verified build for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I88a44a3c0ba2ad8a589602a35ea644dab535b287 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59689 Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-12-03soc/intel/alderlake: Add support for ADL-N PCHUsha P
Introduce the `SOC_INTEL_ALDERLAKE_PCH_N` Kconfig option and use it to specify the correct amount of PCIe I/O. Document number 645550 indicates that Alder Lake-N has 12 PCH root ports and no CPU root ports. Document number 645548 indicates ADL-N has 5 clock sources and 5 clock request signals. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I7ebbcdcdb1ccc34b80ec71ac3e591fe4ad6b1904 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/alderlake: Add the CnviDdrRfim configurationRonak Kanabar
FSP v2422_01 introduced new FSPM UPD CnviDdrRfim. Add CnviDdrRfim config to control the CnviDdrRfim UPD from devicetree. Setting CnviDdrRfim to 1 enable CNVi DDR RFIM BUG=b:201724512 BRANCH=None TEST=Build and boot brya with debug FSP and verify CnviDdrRfim UPD value. Change-Id: Ia06c9ed77d78821fd4724046bae2f31c9d771518 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/intel/alderlake: Add TDP to give correct VR configurationCurtis Chen
The VR configuration should be based on the different Soc SKU type. And we also have different SKU in the same SA PCI ID. Therefore, add TDP to recognize the correct SKU and give the correct power setting. BUG=b:202486131 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: I4d31e7afc76d9a8c772781671f92ec08f9d8713f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-12-03soc/amd/cezanne: Enable secure countersKarthikeyan Ramasubramanian
Guybrush uses secure counters to protect against High Definition (HD) protected content rollback. These secure counters are hosted in TPM NVRAM. Enable secure counters so that they are defined in PSP verstage. BUG=b:205261728 TEST=Build and boot to OS in Guybrush. Ensure that the secure counters are defined successfully in TPM NVRAM. Change-Id: I6818c6f7905aa2eb815059e23c4f79437593f8ca Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-12-02soc/intel/alderlake: Add Kconfigs for all PCH typesAngel Pons
The Alder Lake code currently supports the PCH-M and PCH-P types, which have some differences (so far, only the amount of PCIe I/O). Mainboards can use the `SOC_INTEL_ALDERLAKE_PCH_M` Kconfig option to specify which PCH type they use: select the option to choose PCH-M, do not select the option to choose PCH-P. While this works, it can be confusing once more PCH types are added. Introduce the `SOC_INTEL_ALDERLAKE_PCH_P` Kconfig option so that boards have to explicitly choose a PCH type. Also, use this option to restrict the PCH-P defaults for PCH-dependent settings to avoid unintended reuse of the PCH-P defaults when adding a new PCH type. To make sure only one PCH type is selected, add some preprocessor in `bootblock.h` to provoke a build-time error if this requirement is not met. Kconfig doesn't seem to have a mechanism to describe sets of mutually-exclusive bool options that allows said options to be selected (a `choice` block doesn't allow its elements to be selected). Finally, adapt the ADL boards accordingly. Change-Id: I7deca820e08ce2b5a220f3c97a511a4f3464a976 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-12-01soc/intel/common/pmc: Drop unnecessary pmc_ipc.c entrySubrata Banik
This patch drops unnecessary `pmc_ipc.c` from Makefile as this file is getting included upon CONFIG_PMC_IPC_ACPI_INTERFACE selection. Change-Id: Ie66f0833daf033ec16210221610508f9fbb1e6c7 Signed-off-by: Subrata Banik <subi.banik@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-30soc/amd/stoneyridge/psp: move soc_get_mbox_address to common psp_gen1Felix Held
Despite Stoneyridge being one only SoC in soc/amd that uses the first generation of the PSP mailblox interface, this code is common for all SoCs that use the first PSP mailbox interface generation, so move it to the common PSP generation 1 code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I78126cb710a6ee674b58b35c8294685a5965ecd6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59701 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-30soc/amd/cezanne: add missing PM_ACPI_* bit definitionsFelix Held
This part was copied from Picasso but Cezanne has some more bits used so add the definitions now. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icd128dca1ec30e7c70501c0e64482159be71cc7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-30soc/amd/common/block/include/lpc: add missing LPC_PCI_CONTROL bit defsFelix Held
Both SPI_ROM_BIOS_SEMAPHORE and SPI_ROM_EC_SEMAPHORE bits in the LPC_PCI_CONTROL are defined in the Stoneyridge BKDG #55072 Rev 3.04, Raven1 and Picasso PPR #55570 Rev 3.18, Raven2 PPR #55772 Rev 3.08 and Cezanne PPR #56569 Rev 3.03 which are all platforms that use this code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I855e640d020daf21c9f5b2f62a2ad0fd0274a575 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-30intel: cse_lite: Use cbfs_unverified_area APIJulius Werner
This patch replaces the use of the deprecated cbfs_locate_file_in_region() API with the new cbfs_unverified_area_map(). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If4855280d6d06cf1aa646fded916fd830b287b30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-29sc7280: Add support for USBRavi Kumar Bokka
Adding USB addressmap for sc7280. Use common USB driver for sc7280. BUG=b:182963902 TEST=Validated USB enumeration on qcom sc7280 development board Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Change-Id: Ib92b74c8035a8c0148a9aa48e7870b261b832a33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-29soc/qualcomm/common/usb: Add support for common USB driverSandeep Maheswaram
Add common USB driver for qualcomm soc sc7180 and sc7280. This includes dwc3 controller, qmp ss phy, qusb hs phy and snsp hs phy. BUG=b:182963902 TEST=Validated USB enumeration on qcom sc7180 and sc7280 development board Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Change-Id: I1013ded22855286220cfa747cb25418070fe85a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-29soc/amd/common/block/lpc: use 32 bit accesses in lpc_enable_port80Felix Held
When using 32 bit PCI accesses in lpc_enable_port80, we can use the LPC_IO_OR_MEM_DECODE_ENABLE and DECODE_IO_PORT_ENABLE4 defines and don't need to re-define bits with offsets from the beginning of the third byte within this 32 bit register. This allows to drop the LPC_IO_OR_MEM_DEC_EN_HIGH register definition which points to LPC_IO_OR_MEM_DECODE_ENABLE + 2 and to drop the re-definitions of the bit re-definitions with a different offset. The code in lpc_enable_port80 was originally copied from sb/amd/agesa/ hudson/early_setup.c which might be sort-of a copy from what the AGESA reference code does. TEST=When commenting out SOC_AMD_COMMON_BLOCK_USE_ESPI in the Kconfig of Mandolin and selecting AMD_LPC_DEBUG_CARD, all POST codes still get shown on the POST code LED display when this patch is applied. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I001bb1c2ccf99e36d4fbd73d3bf96b78ddb87d67 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29soc/amd/common/block/lpc/lpc_util: drop lpc_enable_pci_port80Felix Held
This function is unused and none of the SoCs using this code has a physical PCI interface any more, so drop this function. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia5c5a8ec29264a075fefe75038ef2a84684d6427 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29src/cpu,soc/amd/common/block/cpu: Add preload_microcodeRaul E Rangel
This will enable preloading the microcode. By preloading the file, into cbfs_cache we reduce boot time. BUG=b:179699789 TEST=Boot guybrush with CL chain and see microcode preloading and a reduction of 1 ms. | 112 - started reading uCode | 1.041 | 1.204 Δ( 0.16, 0.01%) | | 113 - finished reading uCode | 1.365 | 0.011 Δ( -1.35, -0.10%) | Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: If0c634c692c97769e71acd1175fc464dc592c356 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-29soc/amd/stoneyridge/psp: use PSP_MAILBOX_BAR defineFelix Held
PSP_MAILBOX_BAR is defined as PCI_BASE_ADDRESS_4, so use it instead of PCI_BASE_ADDRESS_4 in the code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8658b674b9adea85dfc71d7036ccf3ae17464b58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29soc/amd/common/block/psp/psp_def: drop PSPV2_STATUS_* definesFelix Held
PSPV2_STATUS_ERROR and PSPV2_STATUS_RECOVERY aren't used and the bit definitions are also wrong, so drop those defines. For the PSP mailbox interface version 2, struct pspv2_mbox is used to access the correct status bits. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8e2aadfde00e2f7b0f99b462b8e3d6954959a584 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-29soc/mediatek: move bustracker_init before watchdog resets againRex-BC Chen
The checking register will be cleared after EC resets, so we move bustracker dump from ramstage to bootblock, before triggering EC reset. TEST=bustracker shows status before watchdog resets BUG=b:207743045 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ic18dc9742cd9f657a035a374e28371dfc5f04ac3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-29soc/mediatek: Flush cache before triggering EC resetRex-BC Chen
There will be no log in cbmem if we trigger ec reset on bootblock stage. Therefore, call dcache_clean_all() before triggering ec reset to flush cache to store logs on cbmem. BUG=b:207743045 TEST=show logs on cbmem Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I1bd900beb4cc84f7121c5fb66907fa73b62517fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/59683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-29soc/intel/common: Include Alder Lake-N device IDsUsha P
Add Alder Lake-N specific CPU, System Agent, PCH (Alder Point aka ADP), IGD device IDs. Document Number: 619501, 645548 Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I0974fc6ee2ca41d9525cc83155772f111c1fdf86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-11-29soc/intel/alderlake: Trigger cse_fw_sync before DRAM InitSridhar Siricilla
The patch enables cse_fw_sync() before DRAM initialization. cse_fw_sync() sends HECI commands in order to set CSE's boot partition and to trigger CSE firmware update. As part of CSE firmware update, coreboot sends HMRPFO_ENABLE HECI command. Since CSE supports the command after DRAM Initialization, cse_fw_sync() is called after DRAM initialization. Starting from CSE Litev16.0.15.1545, CSE support HMRFPO_ENABLE command before DRAM initialization too. So, cse_fw_sync() is called before DRAM initialization. BUG=b:175516533 TEST=Dependency with CSE Litev16.0.15.1545 integration Change-Id: Iad7403650df8bc4e40aa6e48ccfeba95a5789a2d Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55364 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-29cpu/x86: Rename X86_AMD_INIT_SIPI to X86_INIT_NEED_1_SIPISubrata Banik
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage the same logic (to skip 2nd SIPI and reduce delay between INIT and SIPI while perform AP initialization) even on newer Intel platform. Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-29soc/medaitek: add prompt string to config MTK_DFDRex-BC Chen
Add prompt string to allow selecting MTK_DFD manually. TEST=Select and enable MTK_DFD then successfully built firmware images. BUG=b:207450135 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ied711321efa592cf1bf7b318fe4d0aa155c15c70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek/i2c: Return negative values on errorYu-Ping Wu
Following coreboot's convention, return negative error codes from platform_i2c_transfer(). BUG=none TEST=emerge-asurada coreboot BRANCH=none Change-Id: I955b9aae11e20d75fac414d15714330e364dad2f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-26soc/medaitek/mt8186: fix wrong condition of RTC driversRex-BC Chen
We need to report error while rtc_xosc_write() returns false. TEST=error logs for RTC disappear BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5fdf4de0383ef373dd45e8d8741aa861c9c4bdc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: Raise little CPU frequencyRex-BC Chen
Raise little CPU to 2GHz at romstage. TEST=check little core cpu frequency is 2GHz BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If4c983d15beb2b588230f3db7416cb767b29978d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: Add VPROC12/VSRAM_PROC12 to regulator interfaceRex-BC Chen
Add VPROC12/VSRAM_PROC12 to adjust power for raising little CPU frequency. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I59b4627220022a51a116716036a8ba0048039508 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek/mt8186: fix variable typeRex-BC Chen
The types of pwrap_read_field()'s return value and pwrap_write_field()'s `val` argument are u16, so correct the usage in MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie05ab65ecd9b8ea1379ef74393285c4f5d2db8a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek/mt8186: Add support for regulator VPROC12/VSRAM_PROC12Rex-BC Chen
To raise little CPU frequency, add support for VPROC12 and VSRAM_PROC12 of MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: I718fdf36d34969a6e21ddc8c1ec6f525e0e20904 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek: log watchdog statusRex-BC Chen
Reveal watchdog status value on bootblock stage. BUG=b:207646327 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2c5ad222a41085616565dd5c10b0e967bb64ec63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-25soc/intel/alderlake: Add ADLP 4+4+2 power configurationsCurtis Chen
Map existing PCI_DEVICE_ID_INTEL_ADL_P_ID_1 to ADLP 4+4+2 45W SKU power related settings. Per doc#626774 ADL_MOW_WW46_2021, update PD optimization relaxation for ADL-P 482(28W) and 442(45W). BUG=b:193864533 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: Ieba738a8ad3da5ae0a115feaa275b997a219d731 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/amd/*/data_fabric: use DF_ prefix for bit and shift definesFelix Held
Adding the DP_ prefix to the defines for MMIO_NP, MMIO_WE and MMIO_RE clarifies the scope of those definitions. For consistency also add this prefix to MMIO_DST_FABRIC_ID_SHIFT. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a509ccc071aa51a67552fb9e7195358a76fe4dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/*/include/data_fabric: make MMIO_NP definition SoC-specificFelix Held
On Picasso the MMIO_NP bit in the D18F0_MMIO_CTRL0 data fabric register is bit 12, but that has changed to bit 16 in Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I64c06b84e2c0737b259077e7932f418306638e19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/aoac: fix typo in FCH_AOAC_REF_CLK_OK_STATE definitionFelix Held
The bit is called REF_CLK_OK_STATE and not RST_CLK_OK_STATE, so change the name of the define to FCH_AOAC_REF_CLK_OK_STATE. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iae26db94d83ebb2cb799f6d3e0bec37c8e849219 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: add missing de-glitching definesFelix Held
There were only definitions for removing low, high or both glitches, but not to not remove glitches, so add this too for completeness. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I650f7754546935539339c02bb6a94bb3f855d4ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/59631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: rework de-glitching definesFelix Held
I found the name of the DEB_GLITCH_NONE definition a bit misleading, so change it to DEB_GLITCH_REMOVE which should clarify what this will do. The description for this value in the PPR/BKDG is "Remove glitch". This also puts the define in line with GPIO_DEB_REMOVE_GLITCH which is the only place where DEB_GLITCH_NONE/DEB_GLITCH_REMOVE is used. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I59648710e0ff28c2026e1b2cc7e433cafb2f2807 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: use tabs for indentationFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibf7482d20c6d27b2314ec8a31c349eb90c8a8feb Reviewed-on: https://review.coreboot.org/c/coreboot/+/59629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25commonlib/cbmem_id.h: Fix typo in macro nameAngel Pons
Rename `CMBMEM_ID_ACPI_HEST` to `CBMEM_ID_ACPI_HEST`. Change-Id: I3e680244c9573f566b51298462c324e062ab4657 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59616 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Patrick Georgi <patrick@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-25soc/amd/common/block/gpio: drop unused gpio_get_addressFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5b47324af368f81288e9e9be65fe0f1ae2fa3697 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/acpi/gpio_bank_lib: drop unused methodsFelix Held
Those methods were only in the non-common Stoneyridge GPIO ACPI code that got dropped, so drop those unused methods too. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I519d88ffa1d5d4823cce4876ecf59b9019f676e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: drop unused GPIO_PIN_IN/OUTFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idf00879701b223ecaca74aef2a51a1b86d2c6ce3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/stoneyridge: use SOC_AMD_COMMON_BLOCK_ACPI_GPIOFelix Held
Stoneyridge uses the same GPIO bank peripheral as Picasso and Cezanne so we can use the common AMD SoC GPIO ACPI code. TEST=none Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifa1fc923cd5b779765917b171b5a7222f18a176a Reviewed-on: https://review.coreboot.org/c/coreboot/+/59596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: de-duplicate pin status bit defsFelix Held
De-duplicate the definitions for the pin status bit and use this new definition in both the C and the ACPI code. TEST=Timeless build results in identical image for amd/mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8b0fe7dbec5dac176cdfa9690862433f202fb552 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: drop duplicate wake bit defsFelix Held
The GPIO_WAKE_* definitions are the ones that are used in the code, so drop the unused GPIO_*_WAKE_EN definitions for the same bits. Also move the GPIO_WAKE_* definitions to the place the GPIO_*_WAKE_EN ones were before this patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I622673cc72107908b525a65212061062f32e13dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: use bit definitions for masksFelix Held
All bits covered by the bit masks GPIO_INT_ENABLE_MASK, GPIO_PULL_MASK, GPIO_STATUS_MASK and GPIO_WAKE_MASK already have definitions in the code so use those instead of magic numbers. TEST=Timeless build results in identical image for amd/mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0bc9e1cecf2f063b42de3f8875fee421dd256648 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: remove unneeded line breakFelix Held
The definitions of GPIO_INT_ENABLE_STATUS_DELIVERY and GPIO_TIMEBASE_62440uS fit into 96 characters, so remove the unneeded line breaks. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4b9c3885259b9acf0539eed14e23fbbb0deccea7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: drop 8k pullup defineFelix Held
The corresponding bit is marked as reserved in the following versions of the documentation for all SoCs using this code: Mullins: BKDG #52740 Rev 3.05 Stoneyridge: BKDG #55072 Rev 3.04 Raven1, Picasso: PPR #55570 Rev 3.16 & 3.18 Raven2: PPR #55772 Rev 3.08 Cezanne: PPR #56569 Rev 3.03 The old Rev 3.14 of the Picasso PPR #55570 had the bit 19 defined as PullUpSel, but this is no longer the case in newer versions. It is unclear if this got de-featured or if it was never present in the silicon. To be consistent with the current documentation, drop this define. This patch also change the definition of GPIO_PULL_MASK to only cover the bits used for the feature. The Cezanne PPR #56569 Rev 3.03 states a default value of 0 for this bit after reset, so the resulting values in the register aren't expected change. The other PPRs/BKDGs don't specify a reset value for this bit, but it's likely safe to assume that all SoCs that use the new GPIO interface use the same GPIO building block. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaf2d4eec7a13e558c75d7edea343b876909a5b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/intel/adl: Modify SOC_INTEL_ALDERLAKE_DEBUG_CONSENT default valueKane Chen
On ADL, we actually use debug consent 2 for soc debug by DBC Change-Id: Ie6fbf3cdcf5dcd1a11a895ea83f55157a2ac4eb9 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/intel/elkhartlake: Update SA DIDs TableRick Lee
Update SA table as per latest EDS (Doc no: 601458). Add extra SKUs accordingly. Signed-off-by: Rick Lee <rick.lee@intel.com> Change-Id: Ia2bb9e54456dbea634c2b8e192f9fe813b9e6706 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Lean Sheng Tan Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
2021-11-25soc/intel/graphics/Kconfig: Guard optionsArthur Heymans
Change-Id: I3c252e31867e4560fb5aaf12273288f4ff18ae3d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-11-25soc/intel/common/thermal: Refactor thermal block to improve reusabilitySubrata Banik
This patch moves common thermal API between chipsets with thermal device as PCI device and thermal device behind PMC into common file (thermal_common.c). Introduce CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV to let SoC Kconfig to select as applicable for underlying chipset. +------------------------------------------------------+--------------+ | Thermal Kconfig | SoC | +------------------------------------------------------+--------------+ | CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV | SKL/KBL, CNL | | | till ICL | +------------------------------------------------------+--------------+ | CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC | TGL onwards | | | ICL | +------------------------------------------------------+--------------+ Either of these two Kconfig internally selects CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL to use common thermal APIs. BUG=b:193774296 TEST=Able to build and boot hatch and adlrvp platform. Change-Id: I14df5145629ef03f358b98e824bca6a5b8ebdfc6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-24soc/amd/common/block/include/acpi: fix reference to main acpi includeFelix Held
commit e0844636aca974449c7257e846ec816db683d0b9 (acpi: Move ACPI table support out of arch/x86 (2/5)) moved the main acpi header file from arch/x86/include/acpi/acpi.h to include/acpi/acpi.h, so change the comment in here to point to the current location. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5fddd1cd5eefd83816b1c966b5c7edf53eb2486d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/amd/common/block/include/gpio_defs: add GPIO IRQ status registersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I585691038690f1d6855ab09f1ca5791a18cfdbfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/59590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/amd/common/block/include/gpio_defs: use lower case in hex numbersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icb1c7b243f655225347ba2a78c80e6e8653e8cda Reviewed-on: https://review.coreboot.org/c/coreboot/+/59589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/amd/picasso,stoneyridge/acpi: use define for RTC_DATE_ALARMFelix Held
Cezanne already uses a define for this and it's better to define and use constants instead of magic values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifa4b3b3cdb161670128b284a3396fc5a85545608 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/intel/elkhartlake: Disable Intel PSE by defaultLean Sheng Tan
Disable PSE loading by default. If left enabled (current default), the EHL coreboot will end up in endless restart loop, due to FSP unable to locate PSE FW image and trigger global reset. However disabling this flag (PchPseEnable) will cause the coreboot to trigger a single reset due to CSE signal (HECI: CSE does not meet required prerequisites). The reason behind this is that FSP need to perform static disabling (power gate) to fully shut down PSE HW, and to do this will need to global reset entire system including CSE. Then PMC will power gate PSE from the start. To avoid this behavior, the best way to disable PSE is to disable via IFWI FIT softstrap (For specific detail can refer to Intel EHL coreboot MR2 release notes). With this, PMC will power gate PSE from the first cold boot and system will boot happily without single reset behavior. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Iccc0ab1c2e4ebb53013795933eb88262f70f456f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-23soc/intel/alderlake: remove tmp bar assignment for cpu crashlogKane Chen
When the cpu_cl_discovery is called, coreboot actually assigns a BAR to cpu crashlog pci device. Hence, we don't need to assign a tmp BAR for cpu crashlog pci device BUG=b:195327879 TEST=Found BERT table is created and the tcss function is ok in depthcharge Change-Id: Ib7e6772be51ec4f26ef31fed6cb2bddef8ffc6be Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22soc/amd/psp_verstage: Init TPM on S0i3 resumeRob Barnes
Add option to initialize the TPM in PSP verstage during s0i3 resume. This is needed if the TPM is reset in s0i3. FSDL is handling restoring everything else, so only the minimum TPM initialization is done. Move aoac and i2c init before psp_verstrage_s0i3_resume becasue i2c needs to be ready before attempting to restore tpm. BUG=b:200578885,b:197965075 TEST=Multiple cycles of S0i3 suspend resume. ~66ms of additional delay. BRANCH=None Change-Id: Ie511928da6a8b4be62621fd2c4c31a8d1e724d48 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-22soc/intel/cannonlake: Fix PEG1 _PRT generationArthur Heymans
Some weird things happen inside FSP and the routing is not correctly applied, with PIN D being used but lacking a proper routing in ACPI. To work around this issue generate _PRT for all 4 INT pins. Change-Id: I5be6e4514f8c6a47bb887d9f9b95181c9f426a51 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22soc/intel: Allow enable/disable ME via CMOSSean Rhodes
Add .enable method that will set the CSME state. The state is based on the new CMOS option me_state, with values of 0 and 1. The method is very stable when switching between different firmware platforms. This method should not be used in combination with USE_ME_CLEANER. State 1 will result in: ME: Current Working State : 4 ME: Current Operation State : 1 ME: Current Operation Mode : 3 ME: Error Code : 2 State 0 will result in: ME: Current Working State : 5 ME: Current Operation State : 1 ME: Current Operation Mode : 0 ME: Error Code : 0 Tested on: KBL-R: i7-8550u CML: i3-10110u, i7-10710u TGL: i3-1110G4, i7-1165G7 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I374db3b7c0ded71cdc18f27970252fec7220cc20 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22soc/intel/{adl,ehl,jsl,tgl}: Remove unused header `thermal.h`Subrata Banik
This patch removes unused header inclusion as <intelblocks/thermal.h> from several SoC finalize.c files. Change-Id: Ic9ac0ffb352686af22cc9d11b61f904238eef278 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-20soc/intel/alderlake: Hook up common code for thermal configurationSubrata Banik
Thermal configuration registers are now located behind PMC PWRMBASE for Alder Lake Point PCH. Hence, ADL SoC to select SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC to let thermal low threshold is being set as per mainboard provided `pch_thermal_trip`. Note: These thermal configuration registers are RW/O hence, setting those early prior to FSP-S helps coreboot to set the desired low thermal threshold for the platform. BUG=b:193774296 TEST=Dump thermal configuration registers PWRMBASE+0x150c etc. prior to FSP-S shows that registers are now programmed based on 'pch_thermal_trip' and lock register BIT31 is set. Change-Id: I0f972f47845c123f4f74fd75091c9703d54db796 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59271 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/alderlake: Set `pch_thermal_trip` for Dynamic Thermal ShutdownSubrata Banik
Set low maximum temp threshold value used for dynamic thermal sensor shutdown consideration. BUG=b:193774296 Change-Id: I7ee199c19a9d926a4135eeef3b3b481fbff74a79 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-20soc/intel/common/thermal: Allow thermal configuration over PMCSubrata Banik
Thermal configuration has evolved over PCH generations where latest PCH has provided an option to allow thermal configuration using PMC PWRMBASE registers. This patch adds an option for impacted SoC to select the Kconfig for allowing thermal configuration using PMC PCH MMIO space. BUG=b:193774296 TEST=Able to build and boot hatch and adlrvp platform. Change-Id: I0c6ae72610da39fc18ff252c440d006e83c570a0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59209 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/common/thermal: Use `clrsetbits32()` for setting LTTSubrata Banik
This patch uses `clrsetbits32` helper function to set thermal device Low Temp Threshold (LTT) value. BUG=b:193774296 TEST=Able to build and boot hatch and adlrvp with this change. Change-Id: I51fea7bd2146ea29ef476218c006f7350b32c006 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59310 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/common/thermal: Hook up IA thermal block to romstageSubrata Banik
This patch ensures IA common thermal block is now able to compile under romstage with necessary compilation issues fixed. BUG=b:193774296 Change-Id: I3279f55436977ab9a47e04455d8469e50b5c33c8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59391 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/common/thermal: Drop unused parameter of pch_get_ltt_value()Subrata Banik
`struct device *dev` as part of the pch_get_ltt_value() argument is being used hence, replace with `void`. BUG=b:193774296 Change-Id: Iecdf6f6c3023f896a27e212d7c59b2030a3fd116 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59390 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-19soc/intel/alderlake: Update the VccIn Aux Imon IccMax for ADL-MBora Guvendik
This patch updates the VccIn Aux Imon IccMax for ADL-M Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I21753f2e5e9867f22c05e087cbf1f1e097d28bca Reviewed-on: https://review.coreboot.org/c/coreboot/+/57325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18drivers/fsp: Rewrite post code hex values in lowercaseSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I65a83fcd69296f13c63329701ba9ce53f7cc2cb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-18mb/google/guybrush: Add variant_tpm_gpio_tableRob Barnes
Add separate gpio table for TPM i2c and interrupt. Remove TPM gpios from early_gpio_table. This allows for initializing TPM gpios separately from other gpios. BUG=b:200578885 BRANCH=None TEST=Build and boot guybrush Change-Id: I51d087087b166ec3bb3762bc1150b34db5b22f2f Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59083 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-18soc/intel/alderlake: Add Acoustic noise mitigation UPDsWisley Chen
This patch expose the following FSP UPD interface into coreboot: - AcousticNoiseMitigation - FastPkgCRampDisable - SlowSlewRate BUG=b:204009588 TEST=build Change-Id: I0b9c18f9b40d30525028e64754dd1dc86c3b2ec6 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18amdfwtool: Call the set_efs_table for StoneyridgeZheng Bao
Related to https://review.coreboot.org/c/coreboot/+/58555 commit-id: 35b7e0a2d82ac In 58555, we added the SOC ID for Stoneyridge in amdfwtool command line. But it raised building error because it then called "set_efs_table" without setting SPI mode. So we skipped calling that. But in set_efs_table, it has case for Stoneyridge. The boards also need to have this setting. So we remove the skipping and give the proper SPI mode in mainboard Kconfig. Change-Id: I24499ff6daf7878b12b6044496f53379116c598f Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-17Revert "soc/intel/adl: Drop SGPM, RGPM and EGPM methods"Maulik V Vaghela
This reverts commit 1399442289607acc5203fb12df64e9081b3c3aa4. Reason for revert: Some Cr50 chips with old firmware version (x.y.22) don't support long pulse interrupt command, requiring dynamic GPIO PM to be disabled to intercept short pulse interrupt. Due to this coreboot needs to expose SGPM, RGPM and EGPM ACPI methods to support power gating of GPIO communities from the kernel when dynamic GPIO PM is disabled. BUG=b:204832081 BRANCH=None Test= S0ix works with dynamic PM disabled. Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Change-Id: I2b5b00878062f8a499641d7a47db54ed078cd6cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/58811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-11-17soc/amd/psp_verstage: Split up verstage_soc_initRob Barnes
Make psp verstage initialization more granular be splitting verstage_soc_init into separate functions. Specifically, create soc init functions for espi, i2c spi, and aoac. BUG=b:200578885 BRANCH=None TEST=Build and boot guybrush Change-Id: I489889a0dfd4016aa4f2b53a2c6a7a1ea4459e60 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-11-17soc/mediatek/mt8186: Add RTC and clkbuf driversYuchen Huang
Add support for RTC and clkbuf. TEST=boot to kernel and check log ok BUG=b:202871018 Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Change-Id: Ia02a74f685feb2466c113a77cbfa3a7d8fedb595 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Add mtcmos init supportChun-Jie Chen
Add mtcmos to support display and audio. TEST=build pass BUG=b:202871018 Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Change-Id: Ib9d41d47f235376f524c3ff78f1fcc069cbc60cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: add SPM loaderRex-BC Chen
This patch adds support for loading SPM firmware from CBFS to SPM SRAM. SPM needs its own firmware to enable SPM suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. TEST=program counter of SPM is correct value(0x250) after booting up BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia13e5a2ecf09561856b7e958128cd2f045c39f33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59341 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-17soc/mediatek/mt8186: initialize SSPMRex-BC Chen
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I92eb501a1e48dd02d2f94ff392933261e6a42391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek: move MSDC drivers to soc folderRex-BC Chen
Setting of MSDC is defined by soc, so we move them to soc folder. TEST=emerge-cherry coreboot; emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I84ad8a4cde120c97024870ebf750d44b36c2284d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Enable DCMEdward-JW Yang
DCM (dynamic clock management) can dynamically slow down or gate clocks during CPU or bus idle. Enable DCM settings on the MT8186 platform. TEST=build pass and check register ok BUG=b:202871018 Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com> Change-Id: I82add5ae629d59f7d6773e26ac9cba9d54ab8caf Reviewed-on: https://review.coreboot.org/c/coreboot/+/59338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Add I2C driver supportHousong Zhang
Add I2C controller drivers. TEST=build pass BUG=b:202871018 Signed-off-by: Housong Zhang <housong.zhang@mediatek.corp-partner.google.com> Change-Id: Ia3800e3a30b0796a64213d3b1ab688580c6ddbca Reviewed-on: https://review.coreboot.org/c/coreboot/+/59296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek: move i2c function to common folderRex-BC Chen
Move mtk_i2c_max_step_cnt, mtk_i2c_check_ac_timing, mtk_i2c_speed_init and mtk_i2c_calculate_speed to common folder to share with MT8186. TEST=test on tomato ok TEST=emerge-asurada coreboot BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a702741c763bf9261cea90d0d71c08b6e28c261 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/intel/../thermal: Fix return type of `pch_get_ltt_value()`Subrata Banik
This patch modifies the pch_get_ltt_value() function return type from uint16_t to uint32_t to accommodate platforms with more than one thermal threshold. For example: Alder Lake PCH Trip Point = T2L | T1L | T0L where T2L > T1L > T0L. BUG=b:193774296 Change-Id: I5f46ccb457b9cfebf13a512eabb3fb0fab8adb39 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-16lib/prog_loaders, soc/amd/: Make payload_preload use cbfs_preloadRaul E Rangel
Now that CBFS has this functionality built in, we no longer need to manually code it. payload_preload used to use the payload_preload_cache region to store the raw payload contents. This region was placed outside the firmware reserved region, so it was available for use by the OS. This was possible because the payload isn't loaded again on S3 resume. cbfs_preload only uses the cbfs_cache region. This region must be reserved because it gets used on the S3 resume path. Unfortunately this means that cbfs_cache must be increased to hold the payload. Cezanne is the only platform currently using payload_preload, and the size of cbfs_cache has already been adjusted. In the future we could look into adding an option to cbfs_preload that would allow it to use a different memory pool for the cache allocation. BUG=b:179699789 TEST=Boot guybrush and verify preloading the payload was successful CBFS DEBUG: get_preload_rdev(name='fallback/payload') preload successful Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idc521b238620ff52b8ba481cd3c10e5c4f1394bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-16qualcomm/sc7280: gpio: Support eGPIO schemeTaniya Das
eGPIO is a scheme which allows special power island domain IOs to be reused as regular chip GPIOs by muxing regular TLMM functions with Island Domain functions. Allow the eGPIO to be configured via gpio_configure API to be used as a TLMM gpio. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Change-Id: Ib2598a41ba3bb8a8a2acff8253b5bb78633f89f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-11-16soc/intel/../thermal: Drop `ltt_value` local variableSubrata Banik
Using the `GET_LTT_VALUE` macro directly instead of 'ltt_value' local variable. BUG=b:193774296 Change-Id: I791766bf2a78fa30dbba8cf4ad8a50e44f0e73ed Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-16soc/mediatek/mt8186: add early initialization for eMMCRex-BC Chen
Some eMMCs need 80+ms for CMD1 to complete. And the payload may need to access eMMC in the very early stage (for example, depthcharge needs it 20ms after started) so we have to start initialization in coreboot. TEST=boot kernel from eMMC ok BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I3bc06b1fc506b1d6f54f7f456117d22477a87e29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16soc/mediatek/mt8186: Configure eMMC and SD CardWenbin Mei
The Corsola reference design has both eMMC and SD Card interfaces so we have to configure both in RAM stage. TEST=build pass BUG=b:202871018 Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I2f26a8a11edd29a80a7195e3a324151d66ecb293 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16soc/mediatek/mt8195: Add message string when using _Static_assertFlora Fu
The _Static_assert without message string is only available since C++17. Add the message to avoid build fail in the macro. BUG=b:203145462 BRANCH=cherry TEST=build pass and boot pass Signed-off-by: Flora Fu <flora.fu@mediatek.com> Change-Id: Ib146ffafc21b9dbb9d383c9343a9ec1d7c478faf Reviewed-on: https://review.coreboot.org/c/coreboot/+/59298 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-15soc/intel/alderlake: Fix build failure with enabled CSE stitchingBernardo Perez Priego
The following error is observed when building coreboot with CSE stitching enabled. `src/soc/intel/alderlake/Makefile.inc:62: *** missing separator. Stop.` This change prevents such error. BUG=None TEST=Enable CSE stitching, build should complete successfully. Change-Id: I1d9f442d1e1e7be4e8bbd1e653ed0ae6b7475f45 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15sc7280: Add CPUCP firmware supportRavi Kumar Bokka
CPUCP is CPUSS Control Processor. It refers to the firmware for control CPUSS active power management. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: Idac22c8cb231658616999bc577bdf49f9aa7ae74 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-15soc/amd/common/block: Add spi_hw mutexRaul E Rangel
There are currently two users of the SPI hardware, the LPC SPI DMA controller, and the boot_device_rw device. We need to ensure exclusivity to the SPI hardware otherwise the SPI DMA controller can be interrupted and it will silently skip transferring some blocks. Depending on the SPI speed, this change might add a small delay when clearing the elog since a DMA transaction might be in flight. I'll continue optimizing the boot flow to avoid the delay. BUG=b:179699789 TEST=Hack up the code to interleave SPI transactions and verify this patch fixes the silent data corruption. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5eee812a6979c8c0fb313dd2fbccc14b73d7d741 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-15Reland "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen
This reverts commit adb393bdd6cd6734fa2672bd174aca4588a68016. This relands commit 6260bf712a836762b18d80082505e981e040f4bc. Reason for revert: The original CL did not handle some devices correctly. With the fixes: * commit 36721a4 (mb/google/brya: Add GPIO_IN_RW to all variants' early GPIO tables) * commit 3bfe46c (mb/google/guybrush: Add GPIO EC in RW to early GPIO tables) * commit 3a30cf9 (mb/google/guybrush: Build chromeos.c in verstage This CL also fix the following platforms: * Change to always trusted: cyan. * Add to early GPIO table: dedede, eve, fizz, glados, hatch, octopus, poppy, reef, volteer. * Add to both Makefile and early GPIO table: zork. For mb/intel: * adlrvp: Add support for get_ec_is_trusted(). * glkrvp: Add support for get_ec_is_trusted() with always trusted. * kblrvp: Add support for get_ec_is_trusted() with always trusted. * kunimitsu: Add support for get_ec_is_trusted() and initialize it as early GPIO. * shadowmountain: Add support for get_ec_is_trusted() and initialize it as early GPIO. * tglrvp: Add support for get_ec_is_trusted() with always trusted. For qemu-q35: Add support for get_ec_is_trusted() with always trusted. We could attempt another land. Change-Id: I66b8b99d6e6bf259b18573f9f6010f9254357bf9 Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 02:19:50 +0000