summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2019-04-21cpu/x86: Move checking for MTRR's as a proxy for proper CPU resetArthur Heymans
Checking for empty MTRR_DEF_TYPE_MSR as a proxy for proper CPU reset is common across multiple platforms. Therefore place it in a common location. Change-Id: I81d82fb9fe27cd9de6085251fe1a5685cdd651fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-21soc/amd/stoneyridge: Fix gnvs aoac initializationMarshall Dawson
Correct the SD and SATA assignments. TEST=Boot Grunt BUG=b:130788333 Change-Id: Ib75e1dbb0cd7f90a8d297d11d3a7c3bad47a8d21 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2019-04-19soc/intel/cannonlake: Add report for iGD 0x3ea1Lijian Zhao
Integrated graphics id 0x3ea1 reported as unknown in bootblock stage, make it correct. BUG=N/A TEST=Boot up into sarien platform and check with serial log, it shows IGD: device id 3ea1 (rev 02) is Whiskeylake ULT GT1. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I2c4c697b108be7fa74736514ca71469a1ca29c22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-04-19soc/intel/common: Inject SMBIOS type 16 tableLijian Zhao
Add SMBIOS type 16 table for physical memory array, there's two item had been left over.ECC and max capacity, as of now we set it to fixed value as all the platform support by Intel common code don't support ECC memory and so far the biggest capacity is 32GB. BUG=b:129485635 TEST=Boot up with Sarien platform and check with dmidecode, the following is the result: Handle 0x000D, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 2 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: If9c5831956ef273c84d831a2b1572b3442eed961 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32286 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-18soc/intel/cnl: Generate DMAR ACPI tableJohn Zhao
The platform supports Virtualization Technology for Directed I/O. Generate DMAR acpi table if VT-d feature is enabled. BUG=b:130351429 TEST=Booted to kernel and verified the DMAR table contents. Change-Id: I4e1ee5244c67affb13947436d81628c5dc665c9e Signed-off-by: John Zhao <john.zhao@intel.com> Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-04-17soc/intel/common: Add the audio PCI device ID for CometlakeV Sowmya
This patch adds the PCI device ID for cometlake in dsp.c Change-Id: Ia28e3b9d1dc27ffcf24dfb2ef1efa9ae9c4027c8 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-04-17soc/intel/common/timer: Calculate TSC frequency based on CPUID 0x15Subrata Banik
This patch ensures to follow Intel SDM Vol 3B Sec 18.7.3 to calculate nominal TSC frequency. As per SDM recommendation: For any processor in which CPUID.15H is enumerated and MSR_PLATFORM_INFO[15:8] (which gives the scalable bus frequency) is available, a more accurate frequency can be obtained by using CPUID.15H This patch also adds header file to capture Intel processor model number. BUG=b:129839774 TEST=Boot ICL platform and calculate TSC frequency using below methods 1. TSC freq calculated based on MSR 0xCE tsc: Detected 1600.000 MHz processor 2. TSC freq calculated based on CPUID 0x15 tsc: Detected 1612.800 MHz TSC Method 2 actually reduce ~25ms of boot performance time. Note: Method 2 is recommended from gen 6 processor onwards. Change-Id: I9ff4b9159a94e61b7e634bd6095f7cc6d7df87c7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-04-17mediatek: Use the 64-bit timerTristan Shieh
GPT4 is a 32-bit timer and the counter of GPT4 will overflow in about 330 seconds (0xffffffff / 13MHz). Timer and delay functions will not work properly if the counter overflows. To fix that we should use the 64-bit timer (GPT6). BUG=b:80501386 BRANCH=none Test=emerge-elm coreboot; emerge-kukui coreboot Change-Id: I9f080e47253a1b1bab4636a45cb86c8666a25302 Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: You-Cheng Syu <youcheng@google.com>
2019-04-16soc/intel/cannonlake: Configure Vmx support using KconfigRonak Kanabar
Change VmxEnable UPD values based on Kconfig ENABLE_VMX and remove it from Devicetree and chip.h Remove Vmx dependency on Vt-d Change-Id: I4180c2270038a28befd6ed53c9485905025a15ba Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32117 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-16soc/intel/cannonlake: Implement soc side VMX supportRonak Kanabar
Implement required soc side API to enable VMX support using CPU_COMMON BUG=b:124518711 TEST= read msr 0x3a and verify vmx is enabled (value should be 5). Change-Id: I33dbffa6301afabd688080751ba3b85a43e00156 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-16soc/intel/cannonlake: Enable coreboot MP PPI service for WHL/CMLSubrata Banik
This patch performs MP initialization by FSP using coreboot MP PPI service. BUG=b:74436746 TEST=Able to perform MP initialization on WHL and CML platform. Change-Id: I530d50e5aacc3cb9b625df14a50d4c5923e3fb4d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2019-04-13soc/intel/cpulib: Remove redundent enable/disable functionsSubrata Banik
This patch removes multiple enable/disable function definitions and make use of single function with argument to know feature status (enable/disable). Change-Id: I502cd2497b07e9de062df453ecbb9c11df692f5a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32282 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-13soc/intel/cpulib: Factor out IA32_PERF_CTL (0x199) MSR codeSubrata Banik
This patch replaces multiple IA32_PERF_CTL programming with single helper function. TEST=Build and boot WHL and CML platform. Change-Id: I212daa61aa11191dd832630461b517d3dbedd6e1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-12soc/intel/cannonlake: Select FSP_M_XIPFurquan Shaikh
Cannon Lake and family require that FSP-M component should be XIP. This change selects FSP_M_XIP so that the right arguments are passed into cbfstool when adding this component. BUG=b:130306520 TEST=Verified that hatch boots fine to OS. Change-Id: Ifd8a829ebdc7681c81ece4540aa38cdcea7b6fac Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-12soc/intel/cannonlake: Do not use XIP_ROM_SIZEFurquan Shaikh
XIP_ROM_SIZE Kconfig option isn't used on Cannon Lake and family. Thus, this change selects NO_FIXED_XIP_ROM_SIZE to indicate to build system so that romstage can be placed in less rigid manner. BUG=b:129802811 Change-Id: I5f3786396246c89b1039ba1b6b332a32e6a0345d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-11soc/intel/cannonlake: Correct the GPE DWx mapping for GPIO groupsAamir Bohra
This implementation corrects the GPE DWx mapping for GPIO groups. The assignments is done in GPIO MISCFG register for all GPIO communities. And configures the which GPIO communities get register as Tier1. BUG=b:121212459 TEST: Verified the GPIO MISCFG is getting set as per updated map. Change-Id: I451997367025a6dc9e5931bd649524e935ad6aca Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32175 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-09src: Fix remaining #include <timer.h>Nico Huber
Follow-up to add76f91d5 (src: Use #include <timer.h> when appropriate). Change-Id: I7813daa0b73039ec76d33a16ce3ae0ce6cc7f2cc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-04-08soc/amd/stoney: Don't use IS_ENABLED() for a constantNico Huber
IS_ENABLED() was supposed for Kconfig options. Change-Id: Ia40d64856cd89586133e54ff6e02c35d6b647059 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32225 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08Replace remaining IS_ENABLED(CONFIG_*) with CONFIG()Nico Huber
Another run of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I3243197ab852a3fbc3eb2e2e782966a350b78af2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-04-08soc/intel/baytrail: Correct array bounds checkJacob Garber
If `gms == ARRAY_SIZE(gms_size_map)`, then we will have an out of bounds read. Fix the check to exclude this case. This was partially fixed in 04f68c1 (baytrail: fix range check). Found-by: Coverity Scan, CID 1229677 (OVERRUN) Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I8c8cd59df49beea066b46cde3cf00237816aff33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-08soc/skl: Update SkipExtGfxScan in UPD from devtreeMaxim Polyakov
The SkipExtGfxScan option is defined in the device tree, but doesn`t update the value in the UPD. It uses the default value - 0. This means that the FSP will scan all external graphics devices, in spite of the configuration in devicetree.cb for a specific board. Patch updates SkipExtGfxScan options in UPD from devicetree.cb. This change affects all boards with skl/kbl processor. Change-Id: Ie88a41bdf31f7c3e88df6c70c82a1cbf866372c4 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-08src/soc/intel/fsp_baytrail/smm.c: add bootstate entry for locking SMIMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ia296a680217a38136c063cae6ed619df0c497795 Reviewed-on: https://review.coreboot.org/c/coreboot/+/30753 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08{src,util}: Correct typo in comment and debug stringFrans Hendriks
Correct typo in comment and debug string. BUG=N/A TEST=build Change-Id: I0362bb8d7c883e7fcbc6a2fc2f9918251f0d8d6e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29321 Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-08src/soc/intel/cannonlake: Remove ITSS IPC restoreAamir Bohra
Remove ITSS IPC restore for cannonlake, as it does not take effect since the ITSS PCR registers are locked post FSP-S. Change-Id: Ie39e0d43644cb7b03b6c3432f0965f1d76d1bc37 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-06src: Use #include <timer.h> when appropriateElyes HAOUAS
Also, extra-lines added or removed and local includes moved down. Change-Id: I5e739233f3742fd68d537f671642bb04886e3009 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32009 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-06soc/intel/skylake: Set FSP options for PEG portMaxim Polyakov
FSP options list (for each PEG port): - PegXEnable, - PegXMaxLinkWidth, - PegXMaxLinkSpeed, - PegXPowerDownUnusedLanes, - PegXGen3EqPh2Enable, - PegXGen3EqPh3Method. Add PegMaxLinkWidth to chip.h. This option overrides the number of active lines from the devicetree.cb for each enabled PEG port (for example for boards that use x4 instead of x16 lines in PEG0). If the PegMaxLinkWidth is not defined, the port uses the maximum possible number of lines. To enable or disable the corresponding PEG root port you need to add to the devicetree.cb: device pci 01.0 on end # enable PEG0 root port device pci 01.1 off end # do not configure PEG1 If PEG port is not defined in the devicetree, it will be disabled in FSP. It has been tested on ASRock H110M-DVS motherboard (Skylake i5-6600 CPU). Change-Id: I23708f7060edf08739adf61fe61a419329907563 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32045 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
The InternalGfx option in devicetree.cb is not used to enable iGPU. The patch removes this option from chip.h and mb/*/devicetree.cb files for all boards with skl/kbl processor. Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-06soc/intel/skylake: Update GFX devtree optionsMaxim Polyakov
This patch includes the following changes: 1. Sets FSP options in romstage_fsp20.c to select primary GPU. List of options: - InternalGfx, - PrimaryDisplay. 2. iGPU will be initialized if the corresponding PCI device is defined in the device tree as: device pci 02.0 on end In this case, it is not necessary to set the InternalGfx option to enable this device 3. Primary_iGFX is used as the default value for all skl/kbl boards (since the PrimaryDisplay option isn`t defined in the devicetree.cb) Change-Id: Ie3f9362676105e41c69139a094dbb9e8b865689f Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-04-04soc/intel/braswell: Correct serial IRQ supportFrans Hendriks
Serial IRQ was configured in quiet mode, but not enabled. Enable serial IRQ and use 'enum seriirq_mode' as a devicetree option. Function sc_enable_serial_irqs() is added to enabled serial IRQs. enable_serirq_quiet_mode() is renamed to sc_set_serial_irqs_mode(). This function use the 'serirq_mode' to set the mode. The call to this function is moved from finalize to init having serial IRQs enable in early stage. Serial IRQs must be enabled in continuous mode for at least one frame before switching into quiet mode. BUG=N/A TEST=Portwell PQ7-M107 Change-Id: I7844cad69dc0563fa6109d779d0afb7c2edd7245 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-04-04soc/nvidia/tegra210: Increase bootblock sizeMartin Roth
There's an issue with the newest toolchain that is blowing the bootblock size on Smaug when compiling for chromeos. Increasing the bootblock size by 2KB will take care of the issue for a while. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I58f7f1cedc8fc5b4c4287f5a120ed76140e1f7a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-04-02mediatek/mt8183: Fix RTC initialization flowRan Bi
1. Fix RTC lpd settings. Rewrite powerkeys after lpd init to enable low power detect function. 2. Rearrange RTC initialization flow. 3. Add return status for rtc_init. 4. Add log if calling pwrap_write or pwrap_read fail. 5. Increase timeout time to resolve unexpected timeout. BUG=b:127405695 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I6f26edd6699c2f6d9af80c285b70742b44407136 Signed-off-by: Ran Bi <ran.bi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
2019-04-01vboot: Select CONFIG_VBOOT_OPROM_MATTERS in more casesJulius Werner
This patch enables CONFIG_VBOOT_OPROM_MATTERS in a few more cases where I think(?) it should be. Haswell, Broadwell and Baytrail Chromebooks have this enabled in their old depthcharge firmware branches -- we presumably just forgot to move it over when vboot2 migrated the option to coreboot. Braswell didn't, but it seems like this requirement was added when it was migrated to FSP 1.1...? (Not very sure about that one, but it does call load_vbt() right now which executes things based on display_init_required().) Additionally, it seems to make sense to enable it whenever the user explicitly selects VGA_ROM_RUN in menuconfig (like one of the Intel defconfigs does). Once we have all this, one could take a step back and ask whether this option still makes sense at all anymore. It's enabled for almost all devices (that work with vboot at all), it will presumably be enabled for all future devices, and it seems that most devices that don't enable it use libgfxinit, which as far as I can tell isn't gated on display_init_required() but probably should be. Realistically, whatever kind of display init a board needs to do (native or option ROM), it's probably expensive enough that it's worth skipping on a normal mode vboot boot, and we'd want to have this enabled by default on everything except boards that actually don't have a display. So maybe we should flip it around to CONFIG_VBOOT_OPROM_DOESNT_MATTER, but doing that would probably lead to nobody ever selecting it at all. Not sure what the best solution there is yet, but I think this patch at least moves things in the more correct direction. Change-Id: Id96a88296ddb9cfbb58ea67d93e1638d95570e2c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-04-01soc/intel/cannonlake: Add FSP UPD to unlock GPIO pads in devicetreeKrishna Prasad Bhat
FSP has a UPD to unlock all GPIO pads. This parameter is disabled by default. Add a chip parameter so that GPIO pads can be unlocked on mainboard level in devicetree and therefore this feature can be used if needed. BUG=b:128686027 Change-Id: Iad9e8a209dc3f8ca0c994e8c1da329918409a1d4 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-29src: Use include <reset.h> when appropriateElyes HAOUAS
Change-Id: I3b852cae4ef84d257bf1e5486447583bdd16b441 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-29soc/intel/cannonlake: Ignore GBE LTRLijian Zhao
Ignore integrated GBE controller LTR setting to make it wake up from s0ix with 10/100M cable attached. BUG=b:122435844 TEST= Test on sarien platorm, after the changes sytem can wake by WOL, and also checked SLP_S0 residency can increase with 10/100M cable and battery connected. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Iec7dd197b8a456751f8e4dcb19e3e153f5888613 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-29soc/intel/icelake: Fix chipset_power_state structureSubrata Banik
This patch ports CB:30717 changes from CNL to ICL. This structure is declared as a static CAR_GLOBAL in the common PMC library code and in the SOC specific code. Remove the SOC specific version and instead get the chipset_power_state pointer from the PMC library. This fixes events that were recorded in chipset_power_state at boot but were reading as all zero when it was time to parse the structure when logging events to flash. Change-Id: I1152d0e882e1acf475072d1553b74f9161e2f485 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32095 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28qcs405: Add support for USB host modeVijayavardhan Vennapusa
Add required changes for USB host mode for USB disk enumeration. TEST=build & run Change-Id: I35ec549b49b9789389c80843f6103e7243d52aac Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Signed-off-by: Vijayavardhan Vennapusa <vvreddy@partner-android.googlesource.com> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-28soc/intel/apollolake: Add support to log XHCI wake eventsKarthikeyan Ramasubramanian
Add support to identify and log the XHCI wake events for apollolake into event logs. BUG=b:123429132 BRANCH=None TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up events due to USB are logged into the event logs. 6 | 2019-03-21 09:22:18 | S0ix Enter 7 | 2019-03-21 09:22:22 | S0ix Exit 8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9 9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13 10 | 2019-03-21 09:23:20 | ACPI Enter | S3 11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9 12 | 2019-03-21 09:23:30 | ACPI Wake | S3 13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13 Change-Id: I55b850646dda8acaa086a9012c2d8b611016f932 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32000 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-28soc/intel/common: Move support to log XHCI wake eventsKarthikeyan Ramasubramanian
The policy to identify and log the XHCI wake events is similar between skylake and apollolake. Hence move the similar parts to a common location. BUG=b:123429132 BRANCH=None TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up events due to USB are logged into the event logs. 6 | 2019-03-21 09:22:18 | S0ix Enter 7 | 2019-03-21 09:22:22 | S0ix Exit 8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9 9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13 10 | 2019-03-21 09:23:20 | ACPI Enter | S3 11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9 12 | 2019-03-21 09:23:30 | ACPI Wake | S3 13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13 Change-Id: Ia6643342e3292984e422ff3c3fcd4bc0d99f947e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28soc/intel/cannonlake: Update CPU Ratio base on MSRLijian Zhao
The following is the FSP logic: as long as the Cpu Ratio input in coreboot is different with CpuStrapSet, system will force to follow input from coreboot. But CpuStrapsetting is floating, it will be 0 from the first cold boot before memory training and set to 0x1c (or max CPU ratio for the installed CPU) after first memory training. The previous fix was attempting to ensure settings were cleared when FSP was called in recovery mode, but only when coming from S5 which caused issues if recovery mode is requested by the OS and is only followed by a warm reset. BUG=b:129412691 TEST=Boot up sarien platform and force recovery, check there's no reset in the path of recovery. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I959188be46343bc6f2cb3cc149097b4d449802aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/32089 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27soc/intel/cannonlake: Configure voltage margining policiesKrzysztof Sywula
For systems that integrate GbE controllers, following parameters should be configured: SlpS0WithGbeSupport: enable PchPmSlpS0VmRuntimeControl: disable, PchPmSlpS0Vm070VSupport: disable, PchPmSlpS0Vm075VSupport: disable. TEST=boot on any GbE supported WHL platform Change-Id: I02aaf0b77b8fc1555a3a424c02acfada21707d0e Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-27Move calls to quick_ram_check() before CBMEM initKyösti Mälkki
After raminit completes, do a read-modify-write test just below CBMEM top address. If test fails, die(). Change-Id: I33d4153a5ce0908b8889517394afb46f1ca28f92 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-27device/pciexp_device: Convert LTR non-snoop/snoop value into common macroSubrata Banik
Change-Id: I3d14a40b4ed0dcc216dcac883e33749b7808f00d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-03-26qcs405: clock: Adding the clock support for qcs405Pranav Agrawal
Add basic clock support and enable UART, SPI clocks. Change-Id: I991bdde5f69e1c0f6ec5d6961275a1c077bc5bae Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Signed-off-by: Pranav Agrawal <pranava@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-26qcs405: Add GPIO APINitheesh Sekar
Introduce new and required GPIO APIs, using common pinmux definitions for GPIO configuration. TEST=build & run Change-Id: I85ce9007c545b44371c4704a0456774d0eff12a8 Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-25vboot: remove VBOOT_EC_SLOW_UPDATE Kconfig optionJoel Kitching
This option has been relocated to depthcharge: https://crrev.com/c/1524806 BUG=b:124141368, b:124192753 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild CQ-DEPEND=CL:1524806 BRANCH=none Change-Id: Ib4a83af2ba143577a064fc0d72c9bc318db56adc Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31909 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-25soc/apollolake: Add UART0Felix Singer
In my case, on UPsquared board with Celeron N3350 CPU, I don't have UART2 but UART0. Change-Id: Id9a742144eba0f1d1544aafecf44d4730d055b4a Signed-off-by: Felix Singer <felix.singer@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-25Fix up remaining boolean uses of CONFIG_XXX to CONFIG(XXX)Julius Werner
This patch cleans up remaining uses of raw boolean Kconfig values I could find by wrapping them with CONFIG(). The remaining naked config value warnings in the code should all be false positives now (although the process was semi-manual and involved some eyeballing so I may have missed a few). Change-Id: Ifa0573a535addc3354a74e944c0920befb0666be Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-25soc/intel/cannonlake: Clear PMCON status bitsKrishna Prasad Bhat
The prev_sleep_state value was showing 5 even after warm reboot, once the SUS_PWR_FLR bit is being set. This bit was not being cleared. Hence clearing the PMCON status bits. BUG=b:128482282 BRANCH=None TEST=In cbmem logs, check for value of “prev_sleep_state” using command cbmem –c | grep “prev_sleep_state” For cold reboot, "prev_sleep_state 5" For warm reboot, "prev_sleep_state 0" Change-Id: If9863d52ed3c61b6a160df53f023b0787eaaed68 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2019-03-24intel/apollolake: Add HDA to disable_dev functionNico Huber
Change-Id: Id4f5e1fad935645830782ba922f55f614c72cf06 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31353 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-24soc/intel/common: Remove common chip config use_fsp_mp_initSubrata Banik
This patch ensures to make use of common MP Init Kconfig to choose desire method to peform MP initialization for platform. Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-24soc/intel/common: Add Kconfig option to choose desired MP Init for platformSubrata Banik
mainboard users can select correct MP Init Kconfig in order to perform MP initialization. 1. Native coreboot MP Init. 2. FSP to do MP Init. 3. FSP to make use of coreboot MP service PPI to perform MP Initialization Change-Id: Ifbea463fdaf97d68c21a759c37f49492d58a056b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22soc/intel/broadwell: Fix use of CONFIG_USBDEBUGKyösti Mälkki
Change-Id: I52c852fb449de5a6512aa2556592e6dfe7b0c573 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-03-22soc/intel/cannonlake: Enable power button smi in pre-OSKrzysztof Sywula
This change enables user to shutdown the system by shortly pressing power button (<10sec) before OS is loaded. Main use case is shutdown from recovery/broken screen. BUG=N/A TEST=Boot up into recovery screen on Sarien platform, press power button once, and system should shutdown immediatelly. Change-Id: I7655daf65ff058df7d9bad4567f74b4f4007acb4 Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-22soc/intel/{baytrail,braswell}: Make use of generic set_subsystem()Kyösti Mälkki
We missed some PCIe root ports with previous cleanup. Change-Id: I8bf8f8b2ca1836316f84fb7f01820a00d7194d51 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-22arch/mips: Fix <arch/mmio.h> prototypesKyösti Mälkki
These signatures need to be consistent across different architectures. Change-Id: Ide8502ee8cda8995828c77fe1674d8ba6f3aa15f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-21vboot: standardize on working data sizeJoel Kitching
Previously, the size of memory made for vboot_working_data through the macro VBOOT2_WORK was always specified in each individual memlayout file. However, there is effectively no reason to provide this customizability -- the workbuf size required for verifying firmware has never been more than 12K. (This could potentially increase in the future if key sizes or algorithms are changed, but this could be applied globally rather than for each individual platform.) This CL binds the VBOOT2_WORK macro to directly use the VB2_WORKBUF_RECOMMENDED_DATA_SIZE constant as defined by vboot API. Since the constant needs to be used in a linker script, we may not include the full vboot API, and must instead directly include the vb2_constants.h header. BUG=b:124141368, b:124192753 TEST=Build locally for eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild BRANCH=none CQ-DEPEND=CL:1504490 Change-Id: Id71a8ab2401efcc0194d48c8af9017fc90513cb8 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-21soc/intel/cannonlake: Assign FSP UPDs for HPD and Data/CLK of DDI portsKrishna Prasad Bhat
Assign the FSP UPDs for HPD and DDC of DDI ports. FSP assumes that all DDI ports are enabled and hence configures the HPD and CLK for DDI ports. This patch initializes only the required UPDs to enable display ports. BUG=b:123907904 TEST=DP devices working correctly. Change-Id: Ic0c172cd3d087fc8f49b01ab23feffdababf7166 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-21{northbridge, soc, southbridge}/intel: Make use of generic set_subsystem()Subrata Banik
This patch removes all local definitions of sub_system functions and make use of common generic pci_dev_set_subsystem() from PCI bridge and Cardbus devices as well. Change-Id: I5fbed39ed448baf11f0e0786ce0ee94741d57237 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-21{northbridge, soc, southbridge}/intel: Make use of pci_dev_set_subsystem()Subrata Banik
This patch removes local definitions of sub_system function and make use of common function pci_dev_set_subsystem(). Change-Id: I91982597fdf586ab514bec3d8e4d09f2565fe56d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: David Guckian Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-21nvidia/tegra{124,210}/lp0: Directly include `stdint.h`Nico Huber
Use the compiler's `-include` switch to include `stdint.h` instead of adding coreboot's include paths. This avoids leaking other coreboot header files into lp0. Change-Id: I321c0a2fc4a2b3941990804db4e1a691e1bed8c6 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-20soc/nvidia/tegra{124,210}: Remove unneeded 'include <halt.h>'Elyes HAOUAS
Commit 74aa99a (src: Drop unused '#include <halt.h>') accidentally added '#include <halt.h>', however tegra_lp0 directory is not linked into the rest of coreboot. So we can't use generic halt() from halt.c file. Change-Id: I3a67abb77846172597b8ebde779878b9aa2ff8d7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31979 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-20soc/intel/cannonlake: Fix return values for get_param_valueFurquan Shaikh
Commit 41483c9 (soc/intel/cannonlake: Add required FSP UPD changes for CML) changed the enum values for PCH_SERIAL_IO_MODE so that 0 is invalid and valid values start from 1. However, get_param_value was not updated to correctly subtract 1 before returning any value. This change adds a macro PCH_SERIAL_IO_INDEX to apply the subtract 1 operation on any value that get_param_value needs to return. BUG=b:128946016 TEST=Verified that hatch boots successfully. Change-Id: I4e32fcd1efe4a535251f0ec58662a2dc5f70e8b0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-03-19soc/intel/icelake: Enable support for FSP 2.1 specificationSubrata Banik
Remove FSP 2.0 support from ICL SoC and add FSP 2.1 support. Change-Id: Ife0c133ddbf2e0fa14f94ffec15d11830cfaf7b3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30158 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-19rockchip/rk3399: Remove obsolete BL31 resource reservationJulius Werner
RK3399 SoC code still manually excludes the BL31 region from the memory map, even though that is now automatically done with the BL31() memlayout region. CB:31123 and CB:31538 just forgot to remove this line. The resulting memory map stays the same. Change-Id: I87458fa09f437b038af10e0fd9d76ef6d9394bc5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ting Shen <phoenixshen@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-19soc/intel/braswell: Use IRQ 9 for SCIFrans Hendriks
Default reserved value of used for SCI IRQ. Configure SCIS field to use IRQ 9. BUG=N/A TEST=Facebook FBG-1701 booting Embedded Linux Change-Id: I09aca433528b6f64ad3ff3753ae8392c0d89cdc0 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-03-19soc/intel/braswell/romstage: Drop unused 'include <rtc.h>'Elyes HAOUAS
Change-Id: I6577d9a31da44be5b57bb10497d9bd02fc9bbcd3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-19src: Drop unused 'include <cbfs.h>'Elyes HAOUAS
Change-Id: If5c5ebacd103d7e1f09585cc4c52753b11ce84d0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-19Fix 'unsigned int' to bare use of 'unsigned'Subrata Banik
Change-Id: Iee09b601045d7785a0977a4f7ed7385b1d311044 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-18qcs405: Add DRAM resourcesNitheesh Sekar
TEST=build Change-Id: Iea79a942c297400c88aa205da713bcfcb8c51185 Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-18qcs405: Add Timer supportNitheesh Sekar
Init frequency to 19.2 MHz TEST=build Change-Id: I566c7ff2b7085c9dd89ea74a08f3ba862feab2ab Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-18soc/qualcomm/qcs405: Add MMU supportNitheesh Sekar
Initialize 1st 4GB as Device Memory, except: * 1st page: NULL address * System_IMEM: Cached SRAM * Boot_IMEM: Cached SRAM Change-Id: I8c6353be2c0379ec94f91223805762a2286de06d Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-18soc/qualcomm/qcs405: Support for new SoCNitheesh Sekar
Adding the basic infrastruture soc support for qcs405 and a new build variant. TEST=build Change-Id: Ia379cf375e4459ed55cc36cb8a0a92cab18b705e Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-18soc/intel/braswell: Reserve IOAPIC and ROM resourcesFrans Hendriks
The mmio resouces IOAPIC and ROM area not reserved. Reserve IOAPIC and ROM resources. BUG=N/A TEST=Intel CherryHill CRB booting Embedded Linux Change-Id: I917c30892b46ac1d964e7bab339082d17a1e706d Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-18src: Drop unused 'include <romstage_handoff.h>'Elyes HAOUAS
Change-Id: I311269967949533264e44fd3bb29ad3a06056653 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-18soc/intel/cannonlake: Pass coreboot debug interface info to FSPMaulik V Vaghela
coreboot have an option to use legacy UART or LPSS UART. FSP will use the UART initialized by coreboot and we can choose an option to skip Uart initialization by FSP. For this, we need to pass correct debug interface flag to FSP through which FSP will know which UART port to use. If we don't pass correct interface information, FSP may try to dump logs on that port and it may slow down the system. BUG=none BRANCH=none TEST=Compile and boot with coreboot. Check FSP and coreboot logs are coming on serial port. Change-Id: I1ebb20c93e2c15ec085538509099de72bc9dd62c Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18soc/intel/common: Update ESPI disable optionDuncan Laurie
Update the Kconfig option for disabling ESPI SMI source to disable it entirely, not just when ACPI mode is disabled. For the situations where this is needed (just the sarien board) it is better to completely stop the EC from sending any SMI events as no actions are taken. Change-Id: Id94481bb2f0cfc948f350be45d360bfe40ddf018 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-18src/mb/sifive/hifive-unleashed: initialize Gigabit Ethernet ControllerXiang Wang
Initialize the clock of the Gigabit Ethernet Controller. Change-Id: I172dc518c9b48c122289bba5a65beece925410d4 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2019-03-18soc/amd/stoneyridge: Correct PSP SecureOs Kconfig symbolMarshall Dawson
Fix a spelling error in the name. TEST=Build google/aleena and compare amdfw.rom before/after Change-Id: I727ba1d6a8991caa1cdddcfca94c55c73954320a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-16soc/intel/cannonlake: Add required FSP UPD changes for CMLSubrata Banik
This patch adds required FSP UPD changes for CometLake SoC. Also this patch tries to create common parse logic for CometLake as well as cannonlake SOC. We parse device tree parameters for PCI devices and fill values in FSP UPDs. We fill UPDs based on pci device config as well as SerialIoDev config of devicetree. For PCI devices, if PCI device is disabled from devicetree, we'll assign disable value to FSP UPD. In case devicetree doesn't fill this parameter or value is invalid in SerialIoDev config, default mode will be set to PCI. In case of valid value, we'll fill the same value into FSP UPD. BUG=none BRANCH=none TEST=check if CML board boots and proper UPD values are filled. Change-Id: Ib92b660409ab01d70358042b2ed29b8bf9cab26d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-03-16src: Drop unused '#include <halt.h>'Elyes HAOUAS
Change-Id: Ie7afe77053a21bcf6a1bf314570f897d1791a620 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-03-16src: Drop unused 'include <device/pciexp.h>'Elyes HAOUAS
Change-Id: I9b4d72116a66d5a256659fa82682497ef3481e77 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-03-16drivers/intel/fsp1_0: Deduplicate codePatrick Rudolph
Move ChipsetFspReturnPoint() to drivers/intel/fsp1_0. Allows to have a common entry after FSP-M. Change-Id: I064ae67041c521ee92877cff30c814fce7b08e1f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2019-03-15soc/intel/cannonlake: Fix GEN_PMCON bit checksFurquan Shaikh
CNL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A and so this change updates the check for these bits to use GEN_PMCON_A instead of GEN_PMCON_B. BUG=b:128482282 TEST=Verified that prev_sleep_state is reported correctly when booting from S5. Change-Id: I75780a004ded8f282ffb3feb0cdc76233ebfd4f2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31908 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-13soc/intel/cannonlake: Allow mainboard to override DRAM part numberFurquan Shaikh
In order to support mainboards that do not store DRAM part number in the traditional way i.e. within the CBFS SPD for soldered memory, this change provides a runtime callback to allow mainboards to provide DRAM part number from a custom location e.g. external EEPROM on hatch. For other boards it should be a NOP since the weak implementation of mainboard_get_dram_part_num does nothing. BUG=b:127609572 Change-Id: I9b2d4c33fc378b9a24b111971ec2bfdb5f8d57d0 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31850 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-12src: Drop unused 'include <arch/acpigen.h>'Elyes HAOUAS
Use <arch/acpi.h> when appropriate. Change-Id: I05a28d2c15565c21407101e611ee1984c5411ff0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-08src/soc/intel/apollolake/cpu.c: Set up local APICMario Scheithauer
Some Apollo Lake mainboards use SeaBIOS as payload. SeaBIOS requires the initialization of the programmable interrupt controller (PIC) for faultless operation. The PIC mode is need for USB support (e.g. keyboard, memory stick) and for some Option ROMs (e.g. PXE ROM). Therefore add setup_lapic() to configure the APIC. Change-Id: I00b339ce1850729023db74da7f8845927a95dcc6 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31802 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-07soc/intel/cannonlake: Add support for logging wake source in SMMV Sowmya
This patch adds support for logging wake source information in gsmi callbacks. With this change, all the elog logging infrastructure can be used for S0ix as well as S3 on cannonlake. BUG=b:124131938 BRANCH=none TEST=Verified that the wake events are logged during the S0ix resume: 6 | 2019-03-04 17:03:13 | S0ix Enter 7 | 2019-03-04 17:03:17 | S0ix Exit 8 | 2019-03-04 17:03:17 | Wake Source | RTC Alarm | 0 9 | 2019-03-04 17:03:55 | S0ix Enter 10 | 2019-03-04 17:03:56 | S0ix Exit 11 | 2019-03-04 17:03:56 | Wake Source | GPE # | 21 12 | 2019-03-04 17:04:36 | S0ix Enter 13 | 2019-03-04 17:04:45 | S0ix Exit 14 | 2019-03-04 17:04:45 | Wake Source | GPE # | 112 15 | 2019-03-04 17:05:01 | S0ix Enter 16 | 2019-03-04 17:05:09 | S0ix Exit 17 | 2019-03-04 17:05:09 | Wake Source | Power Button | 0 Change-Id: Id627843e22c2524dfa94395b780cf2134f386137 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-07soc/intel/cannonlake: Move power_state functions to pmutil.cV Sowmya
This change moves soc_fill_power_state and soc_prev_sleep_state to pmutil.c. It allows the functions to be used across romstage and smm. BUG=b:124131938 BRANCH=none TEST=none Change-Id: If24c3feeb77f4fb692ef0bf38d537b2b54de3c36 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-07soc/intel/icelake: Add PM timer emulation support in ICLAamir Bohra
CPU PM TIMER EMULATION logic will help UEFI payload to execute rather wait for time tick in absence of TCO and ACPI PM timer after FSP-S. BUG=N/A TEST=Able to build and boot with tianocore payload. Change-Id: I7fd11e728b7a14f41f08bc39bcd92a42a8aa6cff Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-07src: Drop unused include <timestamp.h>Elyes HAOUAS
Change-Id: I7e181111cd1b837382929071a350b94c3afc1aaa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-03-07soc/amd/stoneyridge: Convert SMU fanless optionsMarshall Dawson
Change the amdfwtool command line arguments to use the new --subprogram option. TEST=Verify amdfw.rom is unchanged before and after the conversion BUG=b:126691068 Change-Id: Iaae4094251974b8dad48b8d2c37bb2e43a412237 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31736 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-07soc/amd/stoneyridge: Call amdfwtool with different argumentsMarshall Dawson
To prepare for consolidating amdfwtool command-line options, change the stoneyridge makefile to use the ones that will be kept. By using the new --combo-capable option, the PSP directory's pointer still appears in the correct location within the the Embedded Firmware structure. TEST=Confirm amdfw.rom file is unchanged before/after when building google/grunt BUG=b:126691068 Change-Id: Ia31ebdcb8c392d75c56811b60f1ae673f7ba79cb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31730 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-07security/tpm: Fix TCPA log featurePhilipp Deppenwiese
Until now the TCPA log wasn't working correctly. * Refactor TCPA log code. * Add TCPA log dump fucntion. * Make TCPA log available in bootblock. * Fix TCPA log formatting. * Add x86 and Cavium memory for early log. Change-Id: Ic93133531b84318f48940d34bded48cbae739c44 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-06soc/intel/skylake: Add H110 PCH seriesMaxim Polyakov
This patch adds support H110 chipset (Sunrise Point) for Skylake and Kaby Lake processor families by adding the corresponding IDs. It has been tested on ASRock H110M-DVS motherboard (Skylake i5-6600 CPU). Change-Id: I85ba65ac860687b0f9fd781938e5cac21a1b668d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31602 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-06soc/intel/skylake: Add new Northbridge and IGD IDsMaxim Polyakov
This patch adds support 1) Intel(R) Xeon(R) E3 - 1200/1500 v5/6th Gen Intel(R) Core(TM) Host Bridge/DRAM Registers - 191F; 2) HD Graphics 530 Skylake GT2 - Intel integrated graphics processor https://en.wikichip.org/wiki/intel/hd_graphics/530. This is required to run coreboot on the Intel Core i5-6600 (Skylake) desktop processor. It has been tested on ASRock H110M-DVS motherboard. Change-Id: If47e9ac32813a9f73d3a23f44536f60d1003971d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31601 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-06soc/intel/braswell/include/soc/spi.h: Add OPTYPE valuesFrans Hendriks
Add SPI_OPTYPE_XXX values for the SPI controller. BUG=N/A TEST=flashrom on Facebook FBG-1701 Change-Id: Id183d68b3a80b2e7ab1a0685580d79ca327db03a Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 19:10:21 +0000