summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2017-03-22soc/intel/skylake: Add option to disable host reads to PMC XRAMRizwan Qureshi
FSP disables host access to shadowed PMC XRAM registers by default, it also provides a UPD to enable/disable host reads to these regiters. Expose the same in devicetree as a config option. Change-Id: Iaa33aa3233bda4f050da37d1d8af0556311c9496 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18319 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22soc/intel/skylake: Add configs for enabling DCI and TraceHubAamir Bohra
Add configs for enabling Intel TraceHub and DCI for aid in debugging. Change-Id: Ic40f9499c0125070049856e242e89024ca5a1c4e Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18791 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-22soc/intel/apollolake: Add CQOS config for CAR common codeSubrata Banik
Change-Id: I5947170a96e888cea2f3faac92355e72b63c1fef Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-21soc/intel/apollolake: Use common function to fill DIMM informationBarnali Sarkar
Extract SMBIOS memory information from FSP SMBIOS_MEM_INFO_HOB and use common function dimm_info_fill() to save it in CBMEM. BUG=chrome-os-partner:61729 BRANCH=none TEST=Build and boot Reef to verify the type 17 DIMM info coming in SMBIOS table from Kernel command "dmidecode". Change-Id: I33c3a0bebf33c53beadd745bc3d991e1e51050b7 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18451 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-03-17soc/intel/broadwell: Fix other issues detected by checkpatchLee Leahy
Fix the following error and warnings detected by checkpatch.pl: ERROR: switch and case should be at the same indent WARNING: line over 80 characters WARNING: storage class should be at the beginning of the declaration WARNING: adding a line without newline at end of file WARNING: __func__ should be used instead of gcc specific __FUNCTION__ WARNING: Comparisons should place the constant on the right side of the test TEST=None Change-Id: I85c400e4a087996fc81ab8b0e5422ba31df3c982 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18885 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17soc/intel/broadwell: Fix {}, () and conditional issuesLee Leahy
Fix the following errors and warnings detected by checkpatch: ERROR: open brace '{' following struct go on the same line ERROR: return is not a function, parentheses are not required ERROR: do not use assignment in if condition ERROR: trailing statements should be on next line WARNING: else is not generally useful after a break or return WARNING: braces {} are not necessary for single statement blocks WARNING: braces {} are not necessary for any arm of this statement TEST=None Change-Id: I9414341b0c778c252db33f0ef4847b9530681d96 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18884 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/broadwell: Add int to unsignedLee Leahy
Fix the following issue detected by checkpatch: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=None Change-Id: Iae22e724b6adae16248db7dc8f822f65bfadae5f Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18873 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-03-17soc/intel/broadwell: Fix spacing issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: code indent should use tabs where possible ERROR: space required after that ',' (ctx:VxV) ERROR: space prohibited before that ',' (ctx:WxW) ERROR: spaces required around that '=' (ctx:VxV) ERROR: spaces required around that '<=' (ctx:WxV) ERROR: spaces required around that '<=' (ctx:VxV) ERROR: spaces required around that '>' (ctx:VxV) ERROR: spaces required around that '>=' (ctx:VxV) ERROR: spaces required around that '+=' (ctx:VxV) ERROR: spaces required around that '<' (ctx:VxV) ERROR: "foo * bar" should be "foo *bar" ERROR: "foo* bar" should be "foo *bar" ERROR: "(foo*)" should be "(foo *)" ERROR: space required before the open parenthesis '(' WARNING: space prohibited between function name and open parenthesis '(' WARNING: please, no space before tabs WARNING: please, no spaces at the start of a line False positives are generated for the following test: WARNING: space prohibited between function name and open parenthesis '(' in both pei_data.h and pei_wrapper.h TEST=None Change-Id: Icab08e5fcb6d5089902ae5ec2aa5bbee5ac432ed Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18872 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-17soc/intel/apollolake: Reduce D3 cold delay for eMMC controllerZhuo-hao Lee
eMMC Controller is taking over 100ms to resume during runtime which results in I/O latency issues on the Apollo Lake system such as Snappy. The cause is the Linux Kernel setting the firmware reset time to 100 ms by default. This patch adds _DSM method for eMMC comtroller for specifying the device readiness durations. Function index 9 returns package of five integers to set D3 cold delay to zero and ACPI constant Ones for the elements where overriding the default values is not desired. BUG=b:35774937 BRANCH=none TEST=update snappy coreboot and test i/o latency is under 100ms Signed-off-by: Zhuo-hao Lee <zhuo-hao.lee@intel.com> Signed-off-by: Sowmya V <v.sowmya@intel.com> Change-Id: Idcfe4252b20bead15c2e5b9cb000ff797295f06a Reviewed-on: https://review.coreboot.org/18806 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-17soc/intel/braswell: Fix most of the issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: that open brace { should be on the previous line ERROR: return is not a function, parentheses are not required WARNING: braces {} are not necessary for any arm of this statement WARNING: line over 80 characters WARNING: braces {} are not necessary for single statement blocks WARNING: Avoid unnecessary line continuations WARNING: break is not useful after a goto or return WARNING: else is not generally useful after a break or return False positives are generated by checkpatch for the following test: ERROR: Macros with complex values should be enclosed in parentheses TEST=Build for cyan Change-Id: I19048895145b138a63100b29f829ff446ff71b58 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18871 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/braswell: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for cyan Change-Id: Ib5c6a1bf5308a8add42d7371854b80ea53d7ae84 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18870 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/braswell: Fix spacing issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: space required after that ',' (ctx:VxV) ERROR: space prohibited before that ',' (ctx:WxE) ERROR: spaces required around that '=' (ctx:WxV) ERROR: code indent should use tabs where possible WARNING: space prohibited between function name and open parenthesis '(' WARNING: please, no spaces at the start of a line TEST=Build for cyan Change-Id: I84d4204585b498b695608c5008fdfb7961e2416f Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18869 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2017-03-17soc/intel/skylake: Fix remaining issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: code indent should use tabs where possible ERROR: Macros with complex values should be enclosed in parentheses ERROR: "foo * bar" should be "foo *bar" ERROR: space required before the open parenthesis '(' ERROR: spaces required around that '=' (ctx:VxW) WARNING: space prohibited between function name and open parenthesis '(' WARNING: storage class should be at the beginning of the declaration WARNING: char * array declaration might be better as static const WARNING: please, no space before tabs WARNING: braces {} are not necessary for single statement blocks WARNING: else is not generally useful after a break or return WARNING: static const char * array should probably be static const char * const TEST=Build for glados Change-Id: Ic14ca3abd193cfe257504a55ab6b74782b26bf6d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18868 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-17soc/intel/skylake: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch: WARNING: line over 80 characters TEST=Build for glados Change-Id: I79341f46ca06ac052f987975ccaf975470d27806 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18867 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2017-03-17soc/intel/skylake: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for glados Change-Id: Idc2ad265e8ed8cd7fd6d228cfbe4cbbcb9d3ebfc Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-15intel/skylake: Support for setting AC/DC loadlineDuncan Laurie
Add options to set the AC and DC loadline values for each supported VR type so these can be tuned on a per-board basis in devicetree.cb. BUG=b:36228330 BRANCH=none TEST=Build and boot on Eve and check debug FSP output to ensure that it is applying the provided loadline values Change-Id: I2a5533d2c9fd86351c86584e3738e80ac4c1f915 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18819 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-15intel/skylake: Fix bug in VR configuration with FSP 2.0Duncan Laurie
With the move to FSP 2.0 the number of VR types supported was reduced to 4, and the VR_RING type is no longer present. This means all existing boards using FSP 2.0 are incorrectly passing VR configuration into FSP as the values corresponding to "GT Sliced" and "GT Unsliced" have changed. Fix this by updating the skylake SOC VR handling to account for changes in the FSP configuration and no longer provide VR_RING type when using FSP 2.0. BUG=b:36228330 BRANCH=none TEST=manual: build and boot on Eve Change-Id: I59eea9fba006a4c235d7b42d07fdc6e4f44f7351 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18818 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2017-03-15intel/skylake: nhlt: Add support for rt5514 NHLT blobDuncan Laurie
Add support for describing the NHLT blob for the rt5514 DSP. Currently this only supports 4 channel capture. BUG=b:35585307 BRANCH=none TEST=build and boot on Eve P1 Change-Id: Ib59b56222f9aa65370fdcf9ddf25145c571b1b2e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18816 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-15soc/intel/quark: Read the rmu.bin file from read-only regionLee Leahy
Always read the rmu.bin file from the read-only section of the SPI flash. Without this change vboot attempts to read this file from the A or B section of the flash. TEST=Build and run on Galileo Gen2 Change-Id: Ied8eaa2cd37645bf401aa957936943946bfd6182 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18803 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-15soc/intel/common: Wrap lines at 80 columnsLee Leahy
Fix the following error detected by checkpatch.pl: ERROR: code indent should use tabs where possible TEST=Build and run on Galileo Gen2 Change-Id: Ief4b96073b3df30e45bf5d802ca3b190e7f431a7 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18753 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-15soc/intel/apollolake: Cache FPF status value in flashAndrey Petrov
Since asking CSE to read FPF status turned out to be slow in some cases, cache and save returned value on first boot only. Value is read from flash on consequent boots. BUG=b:35586975 BRANCH=reef TEST=boot twice, make sure cached FPF status is loaded from flash the second time. Change-Id: I6e56a35407c9097616ccb05a557fded7b639c88a Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18774 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-14soc/intel/quark: Pass S3 wake status to fsp_silicon_initLee Leahy
Fix build error with FSP 1.1. Pass the S3 wake status to fsp_silicon_init. TEST=Build and run on Galileo Gen2 Change-Id: I78150f737321db5b1b4d63b411fa6432ac30d080 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18805 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-14soc/intel/quark: Add ESRAM display to FSP 1.1Lee Leahy
Add ESRAM display to FSP 1.1 TEST=Build and run on Galileo Gen2 Change-Id: Ia47b0bdba65606a7f0695332d298fc1e910b0e2f Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18804 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-14soc/intel/quark: Return NULL for top_of_memoryLee Leahy
Return NULL for top_of_memory when the register has not been set. TEST=Build and run on Galileo Gen2 Change-Id: If79cac68c2a64aa9bf3be72d3cfc4c73fceef12b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18802 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-14soc/intel/skylake: Extract DIMM Information from FSP MEM INFO HOBBarnali Sarkar
Extract SMBIOS memory information from FSP SMBIOS_MEM_INFO_HOB and save it in CBMEM. BUG=chrome-os-partner:61729 BRANCH=none TEST=Build and boot KBLRVP to verify the type 17 DIMM info coming in SMBIOS Table from Kernel command "dmidecode". Change-Id: I593d4ccb0d4866e99913a73c49b2f000b51827d1 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18275 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-13soc/intel/quark: Add the verstage filesLee Leahy
Add the files to support verstage for vboot. TEST=Build and run on Galileo Gen2 Change-Id: Icf87075012c08cf581c17d579e0763888c707265 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18040 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: line over 80 characters TEST=Build for reef Change-Id: I4fbe95037ca4b52e64ba37e5c739af4a03f64feb Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18728 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Fix issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: switch and case should be at the same indent ERROR: do not use assignment in if condition WARNING: Statements terminations use 1 semicolon WARNING: unnecessary whitespace before a quoted newline WARNING: else is not generally useful after a break or return TEST=Build for reef Change-Id: I5486936dbf19b066c76179d929660affa1da5f16 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18727 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Fix position of storage classLee Leahy
Fix the following error and warning detected by checkpatch.pl: ERROR: inline keyword should sit between storage class and type WARNING: storage class should be at the beginning of the declaration TEST=Build for reef Change-Id: I2ed418cc3b4a989eb1101013944169429bf147c2 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18726 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Fix parenthesis issuesLee Leahy
Fix the following errors and warning detected by checkpatch.pl: ERROR: space required before the open parenthesis '(' ERROR: space prohibited before that close parenthesis ')' ERROR: return is not a function, parentheses are not required WARNING: space prohibited between function name and open parenthesis '(' TEST=Build for reef Change-Id: I31f854adf3269ba6f77c4044fb3748bb1957841c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18725 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Fix unsigned warningsLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for reef Change-Id: Ifc45ce90d466d087cd20af72ddfc8486d2f1492c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18724 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Remove unnecessary bracesLee Leahy
Fix the following warnings detected by checkpatch.pl: WARNING: braces {} are not necessary for any arm of this statement WARNING: braces {} are not necessary for single statement blocks TEST=Build for reef Change-Id: Ifab09c023faa7da215945f1aedd391f4b2a1a04c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18723 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Indent code using tabsLee Leahy
Fix the following error and warnings detected by checkpatch.pl: ERROR: code indent should use tabs where possible WARNING: please, no spaces at the start of a line WARNING: please, no space before tabs TEST=Build for reef Change-Id: Id7a758463b95274c5e8bbdd67da0955f1ae78aac Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18721 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Fix spacing around operators and commasLee Leahy
Fix the following errors detected by checkpatch.pl: ERROR: spaces required around that '==' (ctx:VxO) ERROR: space required before that '-' (ctx:OxV) ERROR: spaces required around that '=' (ctx:VxW) ERROR: spaces required around that '=' (ctx:WxV) ERROR: spaces required around that '=' (ctx:VxV) ERROR: need consistent spacing around '+' (ctx:VxW) ERROR: space prohibited before that '++' (ctx:WxB) ERROR: space prohibited before that ',' (ctx:WxW) ERROR: space required after that ',' (ctx:VxV) TEST=Build for reef Change-Id: I37265a69fcb14fbf7c182ef29d823f70a5748ad8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Fix space between type, * and variable nameLee Leahy
Fix the following errors detected by checkpatch.pl: ERROR: "foo * bar" should be "foo *bar" ERROR: "(foo*)" should be "(foo *)" TEST=Build for reef Change-Id: I4a762d8fa762057a06e601dfed10538adc5d8bc8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18719 Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/apollolake: Move brace to beginning of lineLee Leahy
Fix the following error detected by checkpatch.pl: ERROR: open brace '{' following function declarations go on the next line TEST=Build for reef Change-Id: Icb92dc49c6e7b8dfea60bc0395f3db7316c4e34c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18722 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-13soc/intel/common: Remove parenthesisLee Leahy
Fix the following error detected by checkpatch.pl: ERROR: return is not a function, parentheses are not required TEST=Build and run on Galileo Gen2 Change-Id: Idf7723d4fd48124a26bbb626afc310820f859f66 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18757 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-13soc/intel/common: Fix unsigned warningsLee Leahy
Fix the following warning detected by checkpatach.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build and run on Galileo Gen2 Change-Id: Ic266c077eb115e0c7d934c15bcc4cc9b9e530a39 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18756 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-13soc/intel/common: Fix spacing issuesLee Leahy
Fix the following errors detected by checkpatch.pl: ERROR: spaces required around that '=' (ctx:VxV) ERROR: spaces required around that ':' (ctx:VxW) ERROR: space required after that ',' (ctx:VxV) ERROR: space required before the open parenthesis '(' ERROR: switch and case should be at the same indent ERROR: "foo ** bar" should be "foo **bar" TEST=Build and run on Galileo Gen2 Change-Id: I52ba2a3c1e0fffad7145eecd878aba8dc450ac0b Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18755 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-13soc/intel/common: Indent code with tabsLee Leahy
Fix the following error detected by checkpatch.pl: ERROR: code indent should use tabs where possible TEST=Build and run on Galileo Gen2 Change-Id: I61c4f01216cb6c788cf6da988c414bbb9648d502 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18754 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-03-10soc/intel/common: Pass the minimum possible string length for strncpyBarnali Sarkar
In strncpy() function of dimm_info_fill(), the minimum possible size of Module Part Number of DIMM is passed as argument. BUG=chrome-os-partner:61729 BRANCH=none TEST=Build and boot KBLRVP to verify the type 17 DIMM info coming in SMBIOS Table from Kernel command "dmidecode". Change-Id: Icc7667149eae9705b91e271628af1b443eb8556e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18617 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-10soc/intel/broadwell: Rework IGD's CDClk selectionNico Huber
CDClk selection was wrong in some corner cases (e.g. ULX SKUs) and, for Broadwell, never took the devicetree config into account. Rewrite the selection with the following in mind: o cpu_is_ult() might return `true` for ULX SKUs, too, o ULX and Broadwell-ULT SKUs can be `overclocked` with additional cooling, so leave that as devicetree option. For Haswell, the following frequency selections are valid: o ULX: 337.5MHz by default, 450MHz optional o ULT: 450MHz only (maybe 337.5MHz too, documentation varies, it wasn't selectable before either) o others: 540MHz by default, 450MHz optional For Broadwell: o ULX: 450MHz by default, 337.5MHz / 540MHz optional o ULT: 540MHz by default, 337.5MHz / 450MHz / 675MHz optional o others: 667MHz by default, 337.5MHz / 450MHz / 540MHz optional Side effects: A too high setting in the devicetree results in the highest possible frequency now, Haswell non-ULT/ULX defaults to 540MHz instead of 450MHz. Change-Id: Iec12752f2a47bf4a5ae6077c75790eae9378c1b2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/17768 Tested-by: build bot (Jenkins) Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-10soc/intel/skylake:Add _DSM method to reduce D3 cold delay for eMMC controllersowmyav
eMMC Controller is taking over 100ms to resume during runtime which results in I/O latency issues on the Skylake systems like Cave and Caroline. This patch adds _DSM method for eMMC comtroller for specifying the device readiness durations. Function index 9 returns package of five integers to set D3 cold delay to zero and ACPI constant Ones for the elements where overriding the default values is not desired. BUG=b:35774937 BRANCH=none TEST=update caroline coreboot and test i/o latency is under 100ms Change-Id: Iacc8aa8560897da8770fe559ca8cd17aaf6ebeba Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/18532 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-10soc/intel/apollolake: Add PM methods to power gate SD cardVenkateswarlu Vinjamuri
This implements dynamic generation of sdcard GpioInt in SSDT. GpioInt in SSDT generation is based on the card detect GPIO if it is provided by the mainboard in devicetree. This implements GNVS variable to store the address of sdcard cd pin. GNVS used to store rxstate of the sdcard cd pin to get card presence. Add _PS0/_PS3 methods to power gate the sd card controller in S0ix and runtime PM. CQ-DEPEND=448173 BUG=chrome-os-partner:63070 TEST=Suspend and resume using 'echo freeze > /sys/power/state'. System should enter S0ix and resume with no issue. Change-Id: Id2c42fc66062f0431385607cff1a83563eaeef87 Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/18496 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
2017-03-09soc/intel/skylake: Add GPIO macros for IOxAPIC and SCILi Cheng Sooi
Add two GPIO macros: 1. PAD_CFG_GPI_APIC_EDGE allows a pin to be route to the APIC with input assuming the events are edge triggered. 2. PAD_CFG_GPI_ACPI_SCI_LEVEL to route the general purpose input to SCI assuming the events are level triggered. Change-Id: I944a9abac66b7780b2336148ae8c7fa3a8410f3f Signed-off-by: Rahul Kumar Gupta <rahul.kumarxx.gupta@intel.com> Reviewed-on: https://review.coreboot.org/18533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-09soc/intel/skylake: Add SKL SOC PCH H GPIO supportLi Cheng Sooi
Add SKL/KBL PCH-H GPIO settings referring from SKL PCH-H specifications to support sklrvp11. Split the gpio_defs.h into headers gpio_pch_h_defs.h and gpio_soc_defs.h for PCH-H specific and SOC specific GPIO defs respectively. Change-Id: I5eaf8d809a1244a56038cbfc29502910eb90f9f2 Signed-off-by: Li Cheng Sooi <li.cheng.sooi@intel.com> Signed-off-by: Rahul Kumar Gupta <rahul.kumarxx.gupta@intel.com> Reviewed-on: https://review.coreboot.org/18027 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-09soc/intel/apollolake: Add check if FPFs are blownAndrey Petrov
Apollolake platform comes with FPF (field-programmable-fuses). FPF can be blown only once, typically at the end of the manufacturing process. This patch adds code that sends a request to CSE to figure out if FPFs have already been blown. Change-Id: I9e768a8b95a3cb48adf66e1f17803c720908802d Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18604 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-09soc/intel/apollolake: Start using common CSE driverAndrey Petrov
Change-Id: If866453f06220e0edcaa77af5f54b397ead3ac14 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18603 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-09soc/intel/common/block: Add HECI driverAndrey Petrov
Add common driver that can send/receive HECI messages. This driver is inspired by Linux kernel mei driver and somewhat based on Skylake's. Currently it has been only tested on Apollolake. BUG=b:35586975 BRANCH=reef TEST=tested on Apollolake to send single messages and receive both fragmented and non-fragmented versions. Change-Id: Ie3772700270f4f333292b80d59f79555851780f7 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18547 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-09soc/intel/apollolake: Prepare to use common HECI driverAndrey Petrov
Change-Id: Ib284493d886b223e8c85607de5fdb56b698fe5fa Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18546 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-08intel/skylake: Filter suspend well power failure event for Deep SxDuncan Laurie
If Deep Sx is enabled the event log will get entries added on every power sequence transition indicating that the suspend well has failed. When a board is using Deep Sx by design this is intended behavior and just fills the logs with extraneous events. To make this work the device init state has to be executed first so it actually enables the Deep Sx policies in the SOC since this code does not have any hooks back into the devicetree to read the intended setting from there. BUG=b:36042662 BRANCH=none TEST=Perform suspend/resume on Eve device with Deep S3 enabled, and then check the event log to be sure that it does not contain the "SUS Power Fail" event. Change-Id: I3c8242baa63685232025e1dfef5595ec0ec6d14a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18664 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-08intel/skylake: Add function to read state of Deep S5Duncan Laurie
Add a function to read the current state of Deep S5 configuration and indicate if it is enabled (for AC and/or DC) or disabled. This is similar to the existing function that checks Deep S3 enable state. BUG=b:36042662 BRANCH=none TEST=tested with subsequent commits to check Deep S5 state at boot and filter event log messages if it is enabled. Change-Id: I4b60fb99a99952cb3ca6be29f257bb5894ff5a52 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18663 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-08intel/skylake: Add devicetree settings for acoustic noise mitigationDuncan Laurie
Add options to the skylake chip config that will allow tuning the various settings that can affect acoustics with the CPU and its VRs. These settings are applied inside FSP, and they can adjust the slew slew rate when changing voltages or disable fast C-state ramping on the various CPU VR rails. BUG=b:35581264 BRANCH=none TEST=these are currently unused, but I verified that enabling the options can affect the acoustics of a system at runtime. Change-Id: I6a8ec0b8d3bd38b330cb4836bfa5bbbfc87dc3fb Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18662 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-03-07soc/intel/quark: Fix errors detected by checkpatchLee Leahy
Fix the errors detected by checkpatch and update the copyright dates. TEST=Build and run on Galileo Gen2 Change-Id: Idad062eaeca20519394c2cd24d803c546d8e0ae0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18591 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-07soc/intel/quark: Fix I2C driverLee Leahy
Fix the following issues: * A raw read is described by a single read segment, don't assert. * Support reads longer than the FIFO size. * Support writes longer than the FIFO size. * Use the 400 KHz clock by default. * Remove the error displays since vboot device polling generates errors. TEST=Build and run on Galileo Gen2 Change-Id: I421ebb23989aa283b5182dcae4f8099c9ec16eee Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/18029 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-06soc/intel/skylake: Clean up CPU codeSubrata Banik
Use header (soc/intel/common/block/include/intelblocks/msr.h) for MSR macros Change-Id: I401b92cda54b6140f2fe23a6447dad89879a5ef0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18554 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-06soc/intel/skylake: Use intel/common/xhci driverSubrata Banik
Change-Id: I7bd83d293fcc1848f6f64526d8f38d010c1f69a3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18223 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-06intelblocks/msr: Move intel x86 MSR definition into common locationSubrata Banik
Move all common MSRs as per IA SDM into a common location to avoid duplication. Change-Id: I06d609e722f4285c39ae4fd4ca6e1c562dd6f901 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18509 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-06soc/intel/common/block: Add Intel XHCI driver supportSubrata Banik
Create sample model for common Intel XHCI driver. Change-Id: I81f57bc713900c96d998bae924fc4d38a9024fe3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18221 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-06soc/intel/common: Make infrastructure ready for Intel common codeSubrata Banik
Select all Kconfig belongs into Intel SoC Family block/ips common code model and include required header.h file. Change-Id: Idbce59a57533dbeb9ccfadca966c3d7560537fa0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18377 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-06soc/intel/skylake: Clean up XHCI codeSubrata Banik
Don't need "skylake/include/soc/xhci.h", hence removed. Change-Id: I35df2003f311b557b622ce1d7a1c2e832693c2fc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18508 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-06soc/intel/apollolake: Move XDCI in its own fileAndrey Petrov
Split out dual-port switching functionality into dedicated xdci.c. Change-Id: Ia58fc3fb6d017dd0c19cc450d1caba307fc89a7b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/18226 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-04soc/intel/skylake: indicate voltage margining enabled/disabledRizwan Qureshi
Support for voltage margining is dependent on the platform. Enabling voltage margining puts additional constraints for the SLP_S0# to be asserted and hence moving to S0ix state. If the platform PMIC/VR supports PCH voltage reduction, voltage marigining can be enabled. Use the UPD provided by FSP to enable/disable voltage margining. Change-Id: Iea214e9d7d6126e8367426485c6446ced63caa66 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18469 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-02intel/broadwell: Use the correct SATA port config for setting IOBP registerYouness Alaoui
Fix a typo that was introduce in commit 696ebc2d (Broadwell/Sata: Add support for setting IOBP registers for Ports 2 and 3.) [1]. Setting one of the SATA port 3 IOBP setting was using the value from the port 2 register. On the purism/librem13 (on which SATA port 3 is tested), this change doesn't seem to affect anything, as that typo wasn't exhibiting any visible problems anyways. [1] https://review.coreboot.org/18408 Change-Id: I3948def5c0588791009c4b24cbc061552d9d1d48 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/18514 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-03-01soc/intel/common: Save Memory DIMM Information in SMBIOS tableBarnali Sarkar
Save SMBIOS memory information from FSP MEM_INFO_DATA_HOB in CBMEM. Add function dimm_info_fill() which populates SMBIOS memory information from FSP MEM_INFO_DATA_HOB data. BUG=chrome-os-partner:61729 BRANCH=none TEST=Build and boot KBLRVP to verify the type 17 DIMM info coming in SMBIOS table from Kernel command "dmidecode". Change-Id: I0fd7c9887076d3fdd320fcbdcc873cb1965b950c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18418 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-23soc/intel/skylake: Enable Systemagent IMGURizwan Qureshi
Camera and Imaging device should be enabled for camera usecase, FSP provides a UPD to enable/disable the SA IMGU (Imaging Unit) expose the same as a config option in devicetree.cb Also remove a redundant assignment for PchCio2Enable. BUG=None BRANCH=None TEST=lspci should list 00:05:00 Change-Id: I4cf7daf41bfaf4dcba414921cac2e7e12bf89f37 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18365 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-23mt8173: Enable Kconfig options for ChromeOSPaul Kocialkowski
This enables some required Kconfig options when CONFIG_CHROMEOS is set. Change-Id: I290902746c1ea19c8bcb69540e34fde09abb9adf Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/18448 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-02-22Broadwell/Sata: Add support for setting IOBP registers for Ports 2 and 3.Youness Alaoui
The Broadwell SATA controller supports IOBP registers on ports 0 and 1 but Browell supports up to 4 ports, so we need to support setting IOBP for ports 2 and 3 as well. The magic numbers (IOBP SECRT88 and DTLE) for ports 2 and 3 were only guessed by looking at ports 0 and 1 and extrapolating from there. Port 3 has been tested (DTLE setting on Librem 13) and confirmed to work so we can assume that port 2 and 3 magic numbers are valid, but having someone confirm them (through non-public documents?) would be great. Change-Id: I59911cfa677749ceea9a544a99b444722392e72d Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/18408 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-22acpi: Add ACPI_ prefix to IRQ enum and struct namesFurquan Shaikh
This is done to avoid any conflicts with same IRQ enums defined by other drivers. BUG=None BRANCH=None TEST=Compiles successfully Change-Id: I539831d853286ca45f6c36c3812a6fa9602df24c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18444 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-22qualcomm/ipq40xx: add vector operation method to SPIYuji Sasaki
Adding spi_xfer_two_vectors as .xfer_vector for ipq40xx spi_ctrlr. Commit c2973d196d1 ("UPSTREAM: spi: Get rid of SPI_ATOMIC_SEQUENCING") has added a new driver method xfer_vector to support combined write-read operation within a single CS cycle. The method is wrapped in the spi_xfer_vector() API. When spi_ctrlr structure does not have xfer_vector method, API calls write and read operations sequentially. However the QCA40xx SPI driver has "forced" CS activation-inactivation in xfer method, so individual operation will break CS after write operation, making combined write-read cycle broken. Adding xfer_vector method to spi_ctrlr is a simple fix to prevent this. BUG=None BRANCH=none TEST=built and run on Gale Change-Id: I2258e563d0793bcacd626f78b8e96b3649a8e4a4 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 88a8824951cef4fe293dfa6e3a1a837ae07b6156 Original-Change-Id: I031e85ce5b847353cb1084f6f68b2af8c6f702e1 Original-Signed-off-by: Yuji Sasaki <sasakiy@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/433439 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Reviewed-on: https://review.coreboot.org/18297 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-22soc/intel/skylake: Fix broken suspend-resumeFurquan Shaikh
With recent change (a4b11e5c90: soc/intel/skylake: Perform CPU MP Init before FSP-S Init) to perform CPU MP init before FSP-S init, suspend resume is currently broken for all skylake/kabylake boards. All the skylake/kabylake boards store external stage cache in TSEG, which is relocated post MP-init. Thus, if FSP loading and initialization is done after MP-init, then ramstage is not able to: 1. Save FSP component in external stage cache during normal boot, and 2. Load FSP component from external stage cache during resume In order to fix this, ensure that FSP loading happens separately from FSP initialization. Add fsp_load callback for pre_mp_init which ensures that the required FSP component is loaded/saved from/to external stage cache. BUG=chrome-os-partner:63114 BRANCH=None TEST=Verified that 100 cycles of suspend/resume worked fine on poppy. Change-Id: I5b4deaf936a05b9bccf2f30b949674e2ba993488 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18414 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-20soc/intel/skylake: Expand USB OC pins definition to support PCH-HTeo Boon Tiong
Currently the USB OC pins definition only being defined up to OC3. For PCH-H, OC4 and OC5 are needed, so add both into OC pin enum. Changes is being verified and booted to Yocto with Saddle Brook. Change-Id: Idaed6fa7dcddb9c688966e8bc59f656aec2b26eb Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/18364 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-20lynxpoint/broadwell: fix PCH power optimizerMatt DeVillier
Setting both bits 27 and 7 of PCH register PMSYNC_CFG (PMSYNC Configuration; offset 0x33c8) causes pre-OS display init to fail on HSW-U/Lynxpoint and BDW-U ChromeOS devices when the VBIOS/GOP driver is run after the register is set. A re-examination of Intel's reference code reveals that bit 7 should be set for the LP PCH, and bit 27 for non-LP, but not both simultaneously. The previous workaround was to disable the entire power optimizer section via a Kconfig option, which isn't ideal. Test: unset bit 27 of PMSYNC_CFG and boot google/lulu, observe functional pre-OS video output Change-Id: I446e169d23dd446710a1648f0a9b9599568b80aa Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18385 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-20Revert "intel/lynxpoint,broadwell: Fix eDP display in Windows, SeaBios & Tiano"Matt DeVillier
We've been able to narrow down the problem to a single register/ single bit, so revert this commit and address the problem in a follow-on commit. This reverts commit 0f2025da0fd4dce6b951b4c4b97c9370ca7d66db. Change-Id: I780f9ea2976dd223aaa3e060aef6e1af8012c346 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18384 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-19soc/intel/skylake: Disable s0ix if not enabled in devicetreeDuncan Laurie
There is an enable_s0ix config option in the devicetree that should be used to disable it when not set: - do not export C8/C9/C10 C-states in _CST - do not enable SLP_S0 in FSP BUG=chrome-os-partner:58666 TEST=test on eve board to ensure that OS only sees 3 ACPI C-states instead of 6 and that it no longer attempts to enter C10 Change-Id: I90e4dc776d1d17d0b700cda63c8476786cd2e4ff Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18394 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-18soc/intel/skylake: add PrmrrSize to chip configRobbie Zhang
Prmrr configuration is supported by Kabylake FSP-M with UPD provided. It is required as one of the SGX initialization steps in BIOS. BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Tested on Eve, verified uncore PRMRR MSRs get programmed to set size and boot. Change-Id: I2b3dc7c92487505165ee429bd1a37bd60ceac8f3 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18361 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17soc/intel/skylake: Add Maxim 98927 and Realtek 5663 NHLT blob supportRizwan Qureshi
Add APIs and required parameters for creating Maxim 98927 and Realtek 5336 SSP endpoints in NHLT table. BUG=chrome-os-partner:62051 BRANCH=None TEST=check that NHLT table created is created properly Change-Id: Ica302aab05c5364faf4923dc5327be8e8eaae8b4 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Signed-off-by: M Naveen <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/18213 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-17soc/intel/skylake: Add config option for KabylakeRizwan Qureshi
Currently there is no distinction between mainboards using Skylake or Kabylake SoC, Add a config option for Kabylake SoC to allow mainboards to explicitly select if they are using it. Change-Id: Ie7960bd81f88a223894afe3115ddc0bc637e4be4 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18312 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-02-17intel/skylake: add function is_secondary_thread()Robbie Zhang
There are MSRs that are programmable per-core not per-thread, so add a function to check whether current executing CPU is a primary core or a "hyperthreaded"/secondary core. For instance when trying to program Core PRMRR MSRs(per-core) with mp_init, cpu exception is thrown from the secondary thread. This function was used to avoid that. Potentially this function can be put to common code or arch/x86 or cpu/x86. BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Tested on Eve, verified core PRMRR MSRs get programmed only on primary thread avoiding exeception. Change-Id: Ic9648351fadf912164a39206788859baf3e5c173 Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Reviewed-on: https://review.coreboot.org/18366 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-16soc/intel/skylake: Add support for SPI deviceFurquan Shaikh
Add a new PCI driver for SPI devices with supported PCI ids. Also, provide a translation table to convert struct device structure into SPI bus number. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: If860eb819f2ce5ae5443f808b356af57f86c52be Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18341 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-16soc/intel/skylake: Add GSPI controller get_config supportFurquan Shaikh
Provide implementation of get_config routine for GSPI controller on skylake platforms. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully. Change-Id: I5170076c15d72a7f29acd0989acef5b9149e2ba0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/18338 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-02-16soc/intel/skylake: Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL ↵Sooi, Li Cheng
HALO SOC Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL HALO SOC Change-Id: I6a44d55d1588d2620bd1179ea7dc327922f49fd7 Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com> Reviewed-on: https://review.coreboot.org/18028 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-14soc/intel/skylake: Perform CPU MP Init before FSP-S InitSubrata Banik
As per BWG, CPU MP Init (loading ucode) should be done prior to BIOS_RESET_CPL. Hence, pull MP Init to BS_DEV_INIT_CHIPS Entry (before FSP-S call). BUG=chrome-os-partner:62438 BRANCH=NONE TEST=Boot to OS with all threads enabled. Change-Id: Ia6f83d466fb27e1290da84abe7832dc814b5273a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18287 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-14Revert: soc/intel/skylake: Set FSP-S UPD PchHdaIDispCodecDisconnect to 1Duncan Laurie
This reverts commit 32997fb0bcb9f4183789331a91fd83138776b96f. This change is breaking I2S audio on Kabylake platforms so revert the change to fix audio. BUG=chrome-os-partner:61548,chrome-os-partner:61009 TEST=manual testing on Eve P1 system Change-Id: I3212c8be83078ed57e38501386605e67b87d5bd0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18360 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-02-14google/rambi: add explicit pull-down for ram-idMatt DeVillier
Some variants need the internal pull resistor on GPIO_SSUS_40 set explicitly to pull down rather than disabling the pull, in order for the ram-id to be read correctly via GPIO. Correct this by adding a function to enable and set the internal pull and define its use as needed in the board's variant.h. Chromium source: branch: firmware-gnawty-5216.239.B /src/soc/intel/baytrail/baytrail/gpio.h#418 /src/mainboard/google/gnawty/romstage.c#60 Test: boot 4GB Candy board and observe correct RAM id, amount detected Change-Id: I8823c27385f4422184b5afa57f6048f7ff2a25ab Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/18309 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-02-14intel/skylake: Disable FADT.8042 if NO_FADT_8042 is setJenny TC
Kernel relies on FADT 8042 flag to enable/disable 8042 interface. If FADT reports 8042 capability and 8042 (/PS2) capability is actually disabled by coreboot, kernel would assume the presence of 8042 based on the FADT flag. This results in undesired system power off when kernel tries to access the 8042 memory region. To address this, CONFIG_NO_FADT_8042 was added to selectively disable 8042 on FADT. BUG=chrome-os-partner:61858 TEST=Boot OS and verify FADT 8042 flag Change-Id: Ic80b3835cb5cccdde1203e24a58e28746b0196fc Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/18307 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-02-08soc/intel/apollolake: dump CSE statusAaron Durbin
Dump the CSE status registers for potential debugging purposes. Explicitly call out manufacturing mode of the part since it's important shipping devices ensure manufacturing mode is locked down. Intel is planning on writing a common driver so a complete status -> string dumps was not done because (surprise surprise) not all the fields are equal with previous implementations. BUG=chrome-os-partner:62177 BRANCH=reef TEST=Booted and noted dump of CSE status registers. Change-Id: I71d15722bb193877f1569c1d3e7f441302f5bd14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18303 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-01-24rockchip/rk3399: set edp pclk to 25MHzLin Huang
It may cause an edp aux transfer error if the edp pclk is set too high, so reduce it to 25MHz. BUG=chrome-os-partner:60130 BRANCH=None TEST=Build and Boot Change-Id: Id1063baa5a82637b03c0f1f754181df074ab17cc Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f7ce31a7483e765ae0c86f8e62ef51413ee1596 Original-Change-Id: Ibb86c12c1d7c00dc3b4cc7a6bdf3bd6e895cd9f3 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/429410 Original-Commit-Ready: Julius Werner <jwerner@chromium.org> Original-Tested-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18178 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-22soc/intel/skylake: Include I2C code in romstageDuncan Laurie
The lpss_i2c driver is enabled in romstage, so the SOC needs to export the pre-ram compatible I2C controller info, which for skylake is in the bootblock/i2c.c file. This was not causing a compiler error in normal use, but when adding I2C debug code in romstage it failed to compile. With this added, I can now do I2C transactions in romstage. Change-Id: I0778b0497d0b6936df47c29b2ce942c8d90cf39b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18198 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-21soc/intel/apollolake: correct GPIO 13 IRQ numberAaron Durbin
The define for GPIO_13_IRQ had the wrong IRQ number. It should be 0x70 instead of 0x6f. BUG=chrome-os-partner:62085 BRANCH=reef TEST=touch controller doesn't indicate continuous interrupts Change-Id: I3a0726db59fc1eb7736d348aecbf1082719f15b2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/18190 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-20soc/intel/skylake: Set FSP-S UPD PchHdaIDispCodecDisconnect to 1Barnali Sarkar
As per Audio PCH team recommendation the iDisplay Audio/SDIN2 should be disabled to bypass InitializeDisplayAudio() function call. Display Audio Codec is HDA-Link Codec, which is not supported in I2S mode BUG=chrome-os-partner:61548 BRANCH=none TEST=Tested to verify that InitializeDisplayAudio() does not get called. Change-Id: Ie0771a8653821e737d10e876313917b4b7c64499 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/18091 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-01-19driver/intel/fsp1_1: Fix boot failure for non-verstage caseTeo Boon Tiong
Currently car_stage_entry is defined only in romstage_after_verstage and as a result when SEPARATE_VERSTAGE is not selected, there is no entry point into romstage and romstage will not be started at all. The solution is move out romstage_after_verstage.S from fsp1.1 driver to skylake/romstage. And add CONFIG_PLATFORM_USES_FSP1_1 to fix the build and boot issue with this change. Besides that, rename the romstage_after_verstage to romstage_c_entry in more appropriate naming convention after this fix. Tested on SkyLake Saddle Brook (FSP 1.1) and KabyLake Rvp11 (FSP 2.0), romstage can be started successfully. Change-Id: I1cd2cf5655fdff6e23b7b76c3974e7dfd3835efd Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17976 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-19soc/intel/skylake: Add SATA interrupt for APIC modeSooi, Li Cheng
Add SATA interrupt for APIC mode Change-Id: I9e0682e235715399da2c585174925c89b9116ab3 Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com> Reviewed-on: https://review.coreboot.org/18130 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-01-16intel: Fix copy/paste error in license textMarshall Dawson
Change all instances of "wacbmem_entryanty" to "warranty". Change-Id: I113333a85d40a820bd8745efe917181ded2b98bf Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/18136 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-01-14soc/intel/apollolake: Allow USB2 eye pattern configuration in devicetreeKane Chen
This code allows people to override the usb2 eye pattern UPD settings for boards. BUG=chrome-os-partner:61031 BRANCH=None TEST=Usb2 function ok and make sure fsp upd is overridden Change-Id: I5fab620a29aba196edf1f24ffe6a1695de1e523e Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/18060 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-13fsp_baytrail: Enable graphic init per defaultWerner Zeh
Baytrail SoC has a bug where in some cases the DisplayPort can hang leading to a non-working display (it just stays black). To avoid this hang, a patch was introduced in 02/2016 (1c3b1112fa - fsp_baytrail: Fix a possible hanging DisplayPort) but per default not switched on so that each mainboard can decide if it wants to use this patch or not. Recently a new case of this bug was reported by Benoit Sansoni (benoit.sansoni@kontron.com) and he requested to enable this fix per default as it costs him a lot of time to find the cause and even the already available fix in coreboot. To avoid this effort for someone else in the future we can enable this fix per default as no negative side effects are known and it is now tested at Siemens and at Kontron on different mainboards with success. As the goal is to enable this code permanently the config switch is not longer needed and is removed. Change-Id: I15bd682218d0dc887945cc91ee3e5488945a6355 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/18109 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-13rockchip/rk3288: rtc-rk808: fix rtc time reading issueJeffy Chen
After we set the GET_TIME bit, the rtc time can't be read immediately. We should wait up to 31.25 us, about one cycle of 32khz. Otherwise reading RTC time will return a old time. BUG=chrome-os-partner:61078 BRANCH=veyron TEST=Build and Boot Original-Change-Id: I6ec07fc6c4d6d8b27b12031423b86b8ab15da6f6 Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/423272 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Change-Id: I9806b624d6e968e51d52aab8c052ae3fa77f247d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b4b708e29fbae0d8f5a2cece79711aa6b1887727 Original-Change-Id: I8c168c14437bb932a59ac0e91a01062df0cf11dc Original-Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/427522 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/18127 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-01-13soc/intel/skylake: Rename car_stage.S for fsp2_0Teo Boon Tiong
Cosmetic changes to rename car_stage.S to car_stage_fsp20.S, so that it is associated with FSP driver version that is being used. Tested on Kabylake Rvp11. Change-Id: I869df6eb746e3982e5912c272255eab6cb008838 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/18083 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-01-12soc/marvell/mvmap2315: Mark mvmap2315_reset() as noreturnMartin Roth
mvmap2315_reset() is called from locations where we're checking for NULL pointers. Because coverity can't tell from the code that the functions are not returning, it's showing errors of accessing pointers after we've determined that they're invalid. Mark it as noreturn, and add a loop in case the reset isn't on the next instruction. This probably isn't needed, but shouldn't hurt. Found-by: Coverity Scan #1362809 Change-Id: If93084629d5c2c8dc232558f2559b78b1ca5de7c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18103 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-123rdparty: update arm-trusted-firmware submoduleMartin Roth
Updated to arm-trusted-firmware TOT: 236c27d2 (Merge pull request #805 from Xilinx/zynqmp/addr_space_size) 183 commits between Sep 20, 2016 and January 10, 2017 - Also add associated change to src/soc/rockship/rk3399 Makefile.inc that is required to build the M0 Firmware. Change-Id: I49695f3287a742cd1fb603b890d124f60788f88f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18024 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 16:13:23 +0000