Age | Commit message (Collapse) | Author |
|
Without ACPI PCI IRQ definitions kernel is left only with informaiton
available in PCI config space, which is not sufficient.
Change-Id: I3854781049851b5aa5b2dbf3257ece2fee76c3e2
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14465
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove offset override improperly added in the "Disable the ROM shadow"
patch
TEST=Build and run on Galileo Gen2
Change-Id: I32fb2da48e3769d59a49619539053f9afdf63b04
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14450
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Initialize the d_variant variable.
Found-by: CID 1353356 Uninitialized variable
TEST=Build and run on Galileo Gen2
Change-Id: I26fba4e77f91d53b6ff9028669aa0186d3174639
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14338
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In program_segment_loaded, flush L1D to L2 only if the address of the
loaded segment lies in the CAR region. Add an assert to ensure that
the loaded segment does not cross CAR boundaries.
Change-Id: Ie43e99299ed82f01518c8a1c1fd2bc64747d0c7b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14449
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Set the default memory type in MTRRCap register to 0. This ensures
that even if the MTRR Enable bit is set in MTRRCap register, the
default memory type is still uncacheable.
Change-Id: I63e7993f8b65dabbab60e7c1bb8d6d89ef4da9ee
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14428
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
With binutils 2.26 our memlayout ASSERT for mirrored SRAM regions
gets confused due to the lack of parentheses grouping the expressions.
This fixes the following issue:
LINK cbfs/fallback/bootblock.debug
mipsel-elf-ld.bfd: bootblock and gram_bootblock do not match!
mipsel-elf-ld.bfd: romstage and kseg0_romstage do not match!
Change-Id: Ib406e229b8a552d9ffc4538b55ee0269bfed62a8
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14440
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
File type for SPD in this soc is defined as CBFS_TYPE_RAW in Makefile,
but CBFS_TYPE_SPD in code.
Causes DDR SPD not to be loaded on memory down.
Tested on Prodrive Technologies Broadwell-D 1548 module:
http://prodrive-technologies.com/amc-ix5-intel-broadwell-de-platform/
Change-Id: I44525b4742b3f93d33f0c5bd9ed642c6fb06f23f
Signed-off-by: Stef van Os <stef.van.os@prodrive-technologies.com>
Reviewed-on: https://review.coreboot.org/14415
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: York Yang <york.yang@intel.com>
|
|
Change-Id: Ife26f5cf6a06a1a5bf965bbeed7a740a990e8f7f
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/14399
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add amenia board files
Change-Id: I6731a348b4c0550d3b9381adb5fb83719f90a5da
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/14352
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Provide trigger option to configure APIC, sci, smi, nmi interrupts.
Change-Id: I1b553fb4ed1b43aba62346f5b758f8d082606510
Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/14353
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BIST result is already stored by arch/x86/bootblock_ctr0.S in
mm0. Also, eax does not contain BIST result by the time control
reaches bootblock_pre_c_entry. bootblock_crt0.S saves timestamp in mm2
which was being overwritten here. Thus, remove the saving of BIST
result from SoC code.
Change-Id: I65444689cf104c59c84574019f5daf82aab10bc7
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14381
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
By selecting this switch in Kconfig one can build complete rom image
including descriptor and ME/TXE.
Change-Id: I7307695008df9a61baba1eb024f1f48be62c53c8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14376
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In northcluster.c, the set_resources member of struct device_operations
is set to NULL. That causes this message on the console:
PCI: 00:00.0 missing set_resources
Eliminate that warning by setting set_resources=DEVICE_NOOP.
Change-Id: I4c6c07fd40b180ca44fe67c4a4d07318df10c40f
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14366
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
To avoid diverging too much on an actively developed code base, keep
the changes to a separate commit that can be downstreamed more easily:
- removed unused includes
- gave kevin board a "Kevin" part number
- marked RW_LEGACY as CBFS region (to follow up upstream changes)
- moved romstage entry point to SoC code (instead of encouraging
per-board copy pasta)
Change-Id: Ief0c8db3c4af96fe2be2e2397d8874ad06fb6f1f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14362
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ia5bcd19d994e23375d7e6d2050113c809ae57296
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14368
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Testing dev->chip == NULL when dev == NULL doesn't make sense (and gcc
thinks that's undefined behavior which should be rewarded with a trap).
Change-Id: I801ce3d6b791fdf96b23333432dee394aa2e2ddf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14360
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Change-Id: Ibb36292bb2fd40aa453dba1d9ce821f3e1e7a823
Reviewed-on: https://review.coreboot.org/14354
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I928efea33030e03cbbaead6812c617d20446f7c9
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14289
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Fix build break on current _CRS method with correct scope.
Change-Id: I75ba8abc547ec69be0a0950e23a7c31b447af31e
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/14288
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I6854f410b4d3847238f0253b7fbb9bbe8f9da395
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/14282
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Initial files to support Broadwell-DE SoC. This is FSP 1.0 based
project and is based on Broadwell-DE Gold release. Change has been
verified on Intel Camelback Mountain CRB.
Change-Id: I20ce8ee8dd1113a7a20a96910292697421f1ca57
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: https://review.coreboot.org/14014
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: Iea1a4b8f7df08d2ae694401211b0b664f5980b02
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14327
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: I151d058615290e528d9d1738c17804f6b9cc8dce
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14321
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The driver interface function derives the driver specific pointer from
the API provided handle, no need to use the handle in the local
functions.
BRANCH=none
BUG=none
TEST=SPI interface with the flash ROM is still working properly.
Change-Id: I7725b658365473c733698ca050e780d1dd5072d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a2b42779785623bd1234ab2dfb0b4db76c890fc7
Original-Change-Id: I9d657dc23540e9eac52d2dbfc551ed32b7fa98f0
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/338090
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14318
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
3288 and 3399 use the same pwm controller.
With this patch in place it is easy to add support for 3399.
BRANCH=none
BUG=none
TEST=booted veyron_jerry to kernel login prompt
Change-Id: If8f5697b4003d078b46de3fa3cebad6c8310a688
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: acf6132619167743c0c991b75f0f49c8d0e51ca7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Change-Id: I79428f9ec71017ad8f3ad67dac1468178ccc3a1e
Original-Reviewed-on: https://chromium-review.googlesource.com/338019
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14336
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Both SOCs use the same base i2c controller, the difference mostly
being the number of interfaces and distribution of the interfaces'
registers between register files.
Upload check was complaining about misspelled labels, fixed them to
pacify the check.
With this patch in place it is easy to add support for 3399.
BUG=none
BRANCH=none
TEST=brought up veyron_mickey all the way to booting the kernel. It
properly recognized the TPM and the edid of the panel, proving
that i2c interface is operational.
Change-Id: I656640feabd0fc01d2c3b98bc5bd1e5f76f063f6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 82832dfd4948ce9a5034ea8ec0463ab82f0f5754
Original-Change-Id: I4829ea53e5f4cb055793d9a7c9957d6438138956
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/337971
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14335
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Most things still need to be filled in, but this will allow
us to build boards which use this SOC.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=with the rest of the patches applied Kevin board can be booted to
Linux login propmt.
Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840
Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/332385
Reviewed-on: https://review.coreboot.org/13915
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: I4572eec52bf834e4fac7bc5b54ceb591a0173a69
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14326
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I3120a52e21cf4ad03bb1d16b5b2b8a5e68aabf3f
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14339
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This updates FSP UPD headers that adds new fields. Importantly
there are new FSPS UPD fields that allow to specify some BARs.
They are needed by FSP SiliconInit API to work properly.
Change-Id: Ie268c57c66b4d8fd6e00835916004058ff05762e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14217
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Certain security features on the platform use IMRs. Unfortunately
this memory is unusable for OS or firware. This patch marks IMR
regions as unusable.
Change-Id: I4803c41c699a9cb3349de2b7e0910a0a37cf8e59
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14245
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The ACPI base address was being programmed sepearately from
the other BARs in the PMC device. Group all the programming
together so there isn't separate paths for programming the
relevant BARs.
Change-Id: Ib17684397fc19c42b39d066f981c01a886d65235
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14320
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Restructure the nvm_is_write_protected routine to eliminate the dead
code error.
TEST=Build and run on Kunimitsu
Change-Id: Ia9170e27d4be3a34760555c48c1635c16f06e6a3
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14337
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
ACPI aware OS will need _PRT table to get desired interrupt
resource assigned and make device driver working. The logical
device within SOC gets fixed interrupt line.
Change-Id: I75141bd62ca2594b74983dff54912e0b20458b9a
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/14243
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add southbridge and LPSS device DSDT table.
Change-Id: I0607398408900d8c5d543ecd5e5d4830d2a70bf1
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/14218
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
HPET table is required to report integrated HPET timer to kernel.
Without HPET table added,Linux kernel will panic when loading timer
driver.
Change-Id: I7368bc29f4e03d5882dcfc4a770fa7bfbc6c26a0
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13374
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
A dedicated pci device driver required for LPC devices as the legacy
IO range need to be included to avoid IO resource confilict. Blindly
set to 0~0x1000 to also avoid the IO resource of COMA/COMB/LPT/FDD
and LPC.Without this driver system will have assertion on load
RTC DXE driver in UEFI payloads.
Change-Id: Icc462c159c2cf39cc1030d55acee79e73a6bfb35
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13356
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
ACPI MADT tables required to describe the multiprocessor interrupt
routing. Apollolake SOC also have the interrupt override table like
other x86 silicons.
Change-Id: I85976e227963c950aad4476d68581b96e1090559
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13373
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Iee30a6efb8dcdd04affd5d1105a254781287e9e4
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14253
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This enables CACHE_MRC_SETTINGS by default as well selects
timer configuration.
Change-Id: I0248001892ef763c39097848b5adc8c1befed1f0
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14252
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
ACPI MCFG table is required for OS to support Enhanced
Configuration Space Access.Apollolake will only support
1 PCI Segment Group, so all the pci bus number from 0
to 0xff will belong to that group.
Change-Id: I3a680eb9c83290cd531159d7e796382a132cd283
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13375
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Implement flash read, write, and erase functionality using the
hardware sequencing capabilities of the SOC. Due to changes in
hardware requirements, the flash chip must be probed differently
than on previous platforms (details explained in comments).
Note that this is a minimal implementation, and does not provide all
the bells and whistles.
Change-Id: I6dcc3bc36dfce61927d126d231a16d485acb1bdc
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14246
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The delay_tsc.c code took different paths depending
__PRE_RAM__ being defined or not. Also, timer_monotonic_get()
was only compiled in a !__PRE_RAM__ environment. Clean up
the code paths by employing CAR_GLOBAL for the global state
which allows the same code to be used in all stages.
Lastly, handle apollolake fallout now that init_timer() is
not needed in placeholders.c.
Change-Id: Ia769fa71e2c9d8b11201a3896d117097f2cb7c56
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14301
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
The default nvm_mmio_to_flash_offset() implementation used by NVM code
in intel/common does not work on apollolake. As a result, provide the
correct override.
Change-Id: I01a94f90dfdd33586a4aac5c05dd8c73e8804437
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14248
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
On apollolake, the flash is memory-mapped differently, and the default
MMIO to flash calculation does not produce correct results. While the
long-term solution is to rewrite the NVM functionality to keep the
flash offset as part of its context, as a temporary measure, allow
overriding the to_flash_offset() function by declaring it weak.
Change-Id: Ic54baeba2441a08cfe1a47e235747797f6efb59b
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14247
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Upcoming designs are based on similar SOCs, this patch moves code
which can be reused into a common directory under soc/rockchip.
Changing spi.h to include stdder.h, as this is were check_member() is
defined, this becomes necessary later when the new SOC code is added.
Renaming UART driver private functions not to be bound to any
particular SOC.
BUG=none
BRANCH=none
TEST=the refactored code works fine on the new platform (with the rest
of the patches applied).
Change-Id: I39a505aecda8849daa58a8eca0e44a5243664423
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f63f2582042ac115481207ddf329ea2e3260e55e
Original-Change-Id: I3a1139305354d460492b25a45f3da315a9a0b49e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/335408
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14235
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Our EDID code had always been aligning the framebuffer's
bytes_per_line (and x_resolution dependent on that) to 64. It turns out
that this is a controller-dependent parameter that seems to only really
be necessary for Intel chipsets, and commit 6911219cc (edid: Add helper
function to calculate bits-per-pixel dependent values) probably actually
broke this for some other controllers by applying the alignment too
widely.
This patch makes it explicitly configurable and depends the default on
ARCH_X86 (which seems to be the simplest and least intrusive way to make
it fit most cases for now... boards where this doesn't apply can still
override it manually by calling edid_set_framebuffer_bits_per_pixel()
again).
Change-Id: I1c565a72826fc5ddfbb1ae4a5db5e9063b761455
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14267
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Fill the ACPI FADT table base on apollolake SOC definition.
Change-Id: Ib7226a3b130f14810dc2af5ca484cef58f477063
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13352
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=none
BRANCH=none
TEST=emerge-oak coreboot
Change-Id: Ia5f2bc9b021b9051f2e5035c5d295b6b9eea1301
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7304016041d42a5317448fc2f9c58c6e6715fc25
Original-Change-Id: I7bcd1cf8dabbe190fcbc62cbf6b3a34430a97b21
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/336592
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14236
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The MT8173 hardware watchdog can assert an external signal which we use
to reset the TPM on Oak. Therefore we do not need to do the same
double-reset dance as on other Chromebooks to ensure that we reset in a
correct state.
Still, we have a situation where we need to reconfigure the watchdog
early in the bootblock in a way that will clear information about the
previous reboot from the status register, and we need that information
later in ramstage to log the right event. Let's reuse the same watchdog
tombstone mechanism from other boards, except that we don't perform a
second reset and the tombstone is simply used to communicate between
bootblock and ramstage within the same boot.
BRANCH=None
BUG=None
TEST=Run 'mem w 0x10007004 0x8' on Oak, observe how it reboots and how
'mosys eventlog list' shows a hardware watchdog reboot event afterwards.
Change-Id: I1ade018eba652af91814fdaec233b9920f2df01f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 07af37e11499e86e730f7581862e8f0d67a04218
Original-Change-Id: I0b9c6b83b20d6e1362d650ac2ee49fff45b29767
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/334449
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14234
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Northbridge resource assignment:
Dynamicly update memory resources for northbridge devices, exclude any
fixed MMIO resources.
Change-Id: I9595f9a12434fa423862836d19f7266d6023fc5a
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13371
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of using arch_segment_loaded() implement
platform_segment_loaded() so as not to tangle the notion of
arch and the chipset. Lastly, add a TODO to allow filtering
of the L1D to L2 flush depending on the region loaded.
Change-Id: I52e7cd2ae6e2d95f21bdd2fe1a471a10565309cb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14215
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Instead of using platform_prog_run() for flushing programs
from L1D to L2 for code coherency purposes use arch_segment_loaded()
instead as that it's primary purpose. The arch_segment_loaded()
is called within the infrastructure at the appropriate places when
loading programs. Therefore use that to perform the L1D flush
instead of when something is just about to run.
Change-Id: Ib0a6be6f676dcf2c946ef5702471af65d89133e9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14212
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
The flush L1D to L2 operation was only being used when loading
romstage from bootblock. However, when the FSP-M component is
loaded no code coherency actions are taken. I suspect this is
because the FSP-M component is larger than the 24KiB L1D and
the entry point is early in the image. Thus, when loading
the FSP-M component the earlier part of the image is flushed
out to L2 in the process of loading the latter part of the
component. Also, once verstage is introduced the same
code coherency actions need to be taken as well. Therefore,
position the apollolake code to handle all these cases.
Change-Id: Ie71764f1b420a6072c4f149ad3e37278b6cb70e1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14210
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
mmio_resource() takes memory address in kilobytes. This patch
adds resources properly.
Change-Id: Id78dcecf05ad5b2c84e5bb5445ae3a4e4ec9d419
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14203
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch would enable PROCHOT feature in skylake. Asserting
PROCHOT line would throttle the GPU/CPU.
BUG=chrome-os-partner:51142
BRANCH=glados
TEST=manually tested on lars. asserting PROCTHOT by EC
reduces FSP in fish-tank from approx 40 to 20. (50 fish setting),
also CPU freq. drops to from 1600000 to 400000
Change-Id: I8fc0c015ea2c26d20bbbfc619f720f231d540feb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1b88b1f183df9c7362d7e58acb0a1fa0b076d56e
Original-Change-Id: Ida8636efc3d8da56ebd3931144d31ab1b88fe806
Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331690
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-(cherry picked from commit d091a999c3827179182b62a1274a9b3581f7f006)
Original-Reviewed-on: https://chromium-review.googlesource.com/333073
Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/14120
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
DRAM initialization on storm requires ipq blobs to be
loaded from cbfs. vboot_locator first checks cbmem_find to see if cbmem is
initialized and contains selected region info, else it falls back to
vboot work buffer.
Since cbmem_find calls into cbmem_top to identify the location of
cbmem area, board/chipset is expected to return NULL until the backing
store is ready, which in this case until DRAM is initialized in
romstage, return NULL for cbmem_top.
Change-Id: I1880ce61dcfdabaa527d7a6dcc3482dfe5d5fd17
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14182
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
A call to i2c_read() for a non-existent address followed by an i2c_read()
to a valid address results in a false abort status for the 2nd call.
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000000 (I2C_ERR_ABORT)
Because the abort status register is cleared on read and wait_tx_fifo()
reads it twice, the returned status does not contain the abort status.
Fixing that changed the 2nd read to reflect the abort status.
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0x4000001 (I2C_ERR_ABORT)
Bit 0 indicates that the address was not acknowledged by any slave.
That's the abort status from the previous transaction.
So I added a read of the abort status before starting a transaction in
both i2c_read() and i2c_write().
i2c_read(1, 0x40, 0, buf, sizeof(buf)) => 0x2000000 (I2C_ERR_TIMEOUT)
i2c_read(1, 0x74, 0, buf, sizeof(buf)) => 0 (I2C_SUCCESS)
Tested on a Bay Trail E3845 SoC.
Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14160
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
i2c.c uses "*(volatile unsigned int *)" constructs where it could use
read32() and write32().
Switch to using read32() and write32().
The remaining instances in wait_tx_fifo() and wait_rx_fifo() are fixed
in https://review.coreboot.org/#/c/14160/
Change-Id: I39e4ff4206587267b6fceef58f4a567bf162fbbe
(intel/fsp_baytrail: Fix I2C abort logic)
I also fixed a few minor white space issues.
Change-Id: I587551272ac171ef1f42c7eb26daf877dc56646b
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14162
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Coreboot and most payloads support three basic pixel widths for the
framebuffer. It assumes 32 by default, but several chipsets need to
override that value with whatever else they're supporting. Our struct
edid contains multiple convenience values that are directly derived from
this (and other properties), so changing the bits per pixel always
requires recalculating all those dependents in the chipset code. This
patch provides a small convenience wrapper that can be used to
consistently update the whole struct edid with a new pixel width
instead, so we no longer need to duplicate those calculations
everywhere.
BUG=None
TEST=Booted Oak in all three pixel widths (which it conveniently all
supports), confirmed that images looked good.
Change-Id: I5376dd4e28cf107ac2fba1dc418f5e1c5a2e2de6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14158
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current Apollolake flow has its code executing out of
cache-as-ram for the pre-DRAM stages. This is different from
past platforms where they were just executing-in-place against
the memory-mapped SPI flash boot media. The implication is
that when cache-as-ram needs to be torn down one needs to be
executing out of DRAM since the act of cache-as-ram going
away means the code disappears out from under the processor.
Therefore load and use the postcar infrastructure to bootstrap
this process for tearing down cache-as-ram and subsequently
loading ramstage.
Change-Id: I856f4b992dd2609b95375767bfa4fe64a267d89e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14141
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ib127af5392ca2b349480f5b21fad2186b444d7e6
Signed-off-by: Lance Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/13348
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In Chromium OS downstream this was done together with adding the support
for ATF, but unfortunately ATF upstream isn't ready yet. This commit
is a reminder to enable things once ATF caught up.
Change-Id: Id0d6908d906a1e54cdda4f232d572d996d9c556f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13968
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As the DA9212 and MT6311 external buck can be controlled by hardware
since rev-5 board, we don't need to pass any board specific parameter
to ARM TF.
BRANCH=none
BUG=none
TEST=build pass
Change-Id: I43eebe25ab14d3dd84e8bb4286e2bb55c8c3c063
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c4dfe61c69042e464b384e2e0edbc55eda23a74
Original-Change-Id: I541357fee6afb1ff2d771bcb073f7c9a9db52f00
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332344
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14124
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add secondary PMIC for external buck control on Oak rev0/1/2/5
BRANCH=none
BUG=none
TEST=verified on Oak rev4/rev5
Change-Id: Ia000b0c7d61e8396856656247f9627e33b21b19b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 241508e7d781fac8ee085ee81962043dd654c52d
Original-Change-Id: I6c75e2462363a5523bf1ebb03af7a36740293624
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332342
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14122
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add secondary PMIC for external buck control on Oak rev3/4
BRANCH=none
BUG=none
TEST=verified on Oak rev4/rev5
Change-Id: I24c18a1cf71fc57deacedcbeb6a100b131c28077
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7f7f8ceac795d8193194a6918a73c4b391009025
Original-Change-Id: I312d8281d2c09d8bc43f092edef3e405d51ee7d0
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332341
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14121
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disable the ROM shadow and enable RAM for 0x000e0000 - 0x000fffff.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing successful display of 0x000ffff0 - 0x000fffff does not match
the end of the SPI flash.
Change-Id: I6e0a50417815320333eae0b69b96280c39db7eaa
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14110
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When system enters suspend, SPM will pull SRCVOLTEN low to turn off some
power rails. VSRMCA7 should follow this pin to turn on/off the power.
BRANCH=none
BUG=none
TEST=verified on Oak rev5
Change-Id: I9d81f855a74fe02a59246ce0c6a7f0e162b9fd0a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d92fb1029b810028138eb91b064b63a58b82602f
Original-Change-Id: I37ff0694cbd7b17d5a1ae172c463b4e6aae2b99c
Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332345
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14103
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
make_idb.py only support RK3288 before, add chip parameter, so we can
support RK3399 either.
Change-Id: I6811acb7f0cdaf1930af9942a70db54765d544d5
Signed-off-by: huang lin <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/13913
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
If the system is using 4GB of memory, enable 4GB mode in
the memory controller.
Change-Id: I4d0f8ad8d43ff45dd786f4244b11c0879d2088cd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275
Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/331811
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14088
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would
result in unusable devices, as the resources were set to 0 and the devices
were disabled.
lpss.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE
and applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode
set to disable and the devicetree set to default.
Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14042
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This change properly assigns resources to the LPE (Low Power Engine for
Audio) and enables ACPI mode.
lpe.c was copied from intel/baytrail with a few minor adjustment for the
different config structure.
ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and
applying the patch that disables clearing gnvs.
https://review.coreboot.org/#/c/14040/
Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14041
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
That wipes out all previously stored settings and breaks running devices
in ACPI mode.
This more closely matches what is done in intel/baytrail.
Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Reviewed-on: https://review.coreboot.org/14040
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Skip logging a wake source when just resetting without coming from
S3 or S5 state. This will prevent the occasional spurious event
like PCI PME from showing up in the event log.
BUG=chrome-os-partner:40635
BRANCH=glados
TEST=run warm reboot teset on chell and ensure no wake source is logged
Change-Id: If739034dc9022b37c90b9cc849a00c604383e70f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7b5cc91adc3ed10df7cebd758cf8144216b9890
Original-Change-Id: I16f4f98df8c70fd25986a8b3644334c7209fd083
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329846
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331173
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13991
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
In order to save more power by shutting down clocks add the
ability to optionally clock gate the 8254 programmable interrupt
timer. When doing this the platforms lose their "PC"-ness which
certain payloads and OSes rely on such as SeaBIOS.
BUG=chrome-os-partner:50214
BRANCH=glados
TEST=Enabled option on chell. Noted the bit is set upon booting.
Change-Id: I01f9d177bbde417d1efec2e16656a07dcebccbde
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 662575aa6a63656dedfa0ce1f202f5fac0205477
Original-Change-Id: Ib4a613cf1c28fc96c36fa2987c4b58a05beab178
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329411
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331171
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13985
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Adding an option to enable VR specific mailbox command.
When set, an extra VR mailbox command specifically for
the MPS IMPV8 VR will be sent.
BUG=chrome-os-partner:48511
BRANCH=None
TEST=Verified on glados, clean S0ix entry and exit.
IMVP8 power is also pretty low
Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917
Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e
Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/329393
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13982
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
NOR flash has a hardware limitation that it can't access SRAM region
after 4GB mode is enabled. We add a DRAM DMA region after 0x40000000
for NOR flash driver. So that the NOR flash driver can use this region
after 4GB mode is enabled.
BRANCH=none
BUG=chormoe-os-partner:49229
TEST=Boot to kernel on rev4 w/ 2GB ram and rev3 w/ 4GB ram.
And check /proc/meminfo.
Change-Id: I4a86f0028b26509589ec8d09e2d077920446ece1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dc61ec55187959101a9e891fe5e93928e9b8176e
Original-Change-Id: Ifedc9e2dfba5d294297b3a28134997ac1dd38f94
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327962
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331177
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13989
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Remove DRAM_SIZE_MB Kconfig setting and use sdram_size_mb() to detect
the DRAM size at runtime.
BUG=chrome-os-partner:49427
BRANCH=none
TEST=Boot to kernel
Change-Id: I0c3245db73335fb4f1c89c1debde715fc96ecba7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 00f6f2bbed0e7d23181337b9274191b31e73e223
Original-Change-Id: I409163fe527e966c184f28d7d9bbc809ae2308ed
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327961
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331176
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13988
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The DRAM size can not be determined before DRAM is initialized. Since
mt8173 only support 2GB and 4GB DRAM models. We map 0x0 to the end of
2GB DRAM address before DRAM is initialized.
BRANCH=none
BUG=none
TEST=boot to kernel
Change-Id: I27a00106b0aa91c3dacfcd2bcd9208f08b108dc5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9720e67c86f0d37a08f7c32e900996c75d60288a
Original-Change-Id: I87d9c6ac11486decde102b7821f550c2f1a51f1c
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/327960
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/331175
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13987
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Runs the LITTLE core at highest freqency to speed up the boot time.
Set Vproc to 1.125V and set the freqency to 1.6Ghz for backward
compatibility. (The highest frequency for the IC before E3 is 1.6Ghz.)
BRANCH=none
BUG=chrome-os-partner:47422
TEST=flash the bootloader and measure the boottime by cbmem result
Change-Id: Id0b906bf34ac534667eb6e8f576e30942ceb923e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5fc38548d158158f07cded8cfc8ea5a0a7952161
Original-Change-Id: I62af26c13d98211974243100c581abcb5408fd63
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/324685
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13980
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=boot oak to kernel on rev2
Change-Id: I368fcac1cf5e2261d00a34882a7341733ebd0732
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6ea0407f7273bc88613bc23a6fc4c41f9cca1adb
Original-Change-Id: Ic422e7265fdd35c573d8cd44280a1f7dc163a6db
Original-Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/323932
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13979
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=emerge-oak coreboot
Change-Id: Ifdeb686f7695fbefadc15d47e9b0c49b6b35c37d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2404a31dac8c84580424fc01816669b27ddf8617
Original-Change-Id: I831d34b1bce2675caa3da8da7a214f392e561000
Original-Signed-off-by: Milton Chiang <milton.chiange@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/320025
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13969
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We define a mechanism to pass board specific parameters to BL31. The
idea is BL31 doesn't need to have the board revision knowledge, it
only needs to process the board specific parameters to initialize and
control specific hardware. In this way, we can support different boards
with same BL31 binary.
[pg: add the code, but don't actually enable the support yet, because it
relies on code that still needs to be merged to arm-trusted-firmware.]
BRANCH=none
BUG=none
TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got
different board arguments in ARM TF
Change-Id: I9ea3ce6c8f79dd427be67f30bc940d2038173b81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace
Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8
Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292678
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13100
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=build pass and boot to oak kernel
Change-Id: I8aa9ca0fce804cc1682947b7e184781dd5d437f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9
Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9
Original-Signed-off-by: jun.gao <jun.gao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/319031
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13107
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
TEST=emerge-oak coreboot
BRANCH=none
Change-Id: I6b05898de2d0022e0de7b18f1db3c3e9c06d8135
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b614eeb1bba5660438c214e82225832809caca8e
Original-Change-Id: I0f7b0a426dae1548b34114a024c92befdf6002f6
Original-Signed-off-by: Peter Kao <peter.kao@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292692
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13105
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=boot to shell on Rev3
Change-Id: I77c5a8aa31ab10d82115a60bdfee1da35707619f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56
Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b
Original-Signed-off-by: CC Ma <cc.ma@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/303207
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13103
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=none
TEST=boot oak to kernel on rev1
Change-Id: I0773c81398df445aec16bcfcd0c5a8fe5a588b5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae15c42c2f7d9c2a716e5b6098d85e17279f5eae
Original-Change-Id: I65abf810d35ae5e7156cf6f5730117e690183d18
Original-Signed-off-by: mtk05962 <bayi.cheng@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/292693
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13102
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of having to supply CAR memory region during compilation
time it is possible to determine it in runtime. FSP2.0 blobs carry
a copy of UPD structure pre-populated with 'default' values. The
default value for StackSize is actually the real value blob needs.
Change-Id: I298e07bb12470ce659f63846ab096189138e594f
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/14001
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This adds most important MMIO reserved memory resources,
real DRAM memory resources, and some DRAM resources that
can not be used as RAM for whatever reason.
Change-Id: Id5a80cf18d67ace991e8046fa46c4b7ed47c626a
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13360
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
UART bar gets overwritten during resource allocation stage. As result
the serial driver ends up using stale BAR so serial output does not
work. This driver simply tells resource allocator not to change BAR
of UART device.
Change-Id: I81f4f04089106c80bea97f0bbaba890df00c8ac5
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13997
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I6a632ca7d4a19c4973c41bb102f97e0836f27a5e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13996
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I54532b71c7649f7eeccbb2213b31418cfdbfb00c
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13911
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This is the minimal setup needed to get all CPU cores enabled. That
includes sending an IPI to APs and setting up MTRRs. Microcode updates
are not performed for two reasons:
* CSE (Converged Security Engine) upgrades the microcode before
releasing reset
* Microcode update files are not available at this point in time
Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13910
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
There's no need to use a struct resource type for
fsp_find_reserved_memory(). struct resource is mainly associated
with a device and that memory is added to cbmem after memory init.
Other uses ins FSP 2.0 just use struct range_entry. Use that
instead for consistency.
Change-Id: Id7d39da1c2e23f97cdaafd7f5d281cefa6fee543
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13960
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
The memory provided to MemoryInit() for its own usage is at the
top of the CAR region.
Change-Id: I8685b5ab138182e24123b14cac6f7b32e5e784d2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13957
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
For all the chipsets which were performing the following sequence:
x86_setup_fixed_mtrrs();
x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2);
Replace that with x86_setup_mtrrs_with_detect() since it is equivalent.
Change-Id: I9f362dbf38942d675f615d22b9e5770ce65e5a08
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13936
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Nyan is an old board that was committed before several core code
modernizations to timestamp and CBFS code. Not all of those later
patches were correctly integrated with old boards like this, and the
core code has evolved to a point where it doesn't actually boot anymore.
This patch fixes that issue and brings the Nyan boards more in line with
how later ARM platforms look.
BRANCH=None
BUG=None
TEST=My Blaze boots again.
Change-Id: I3277a2f59ad8ed47063f7f6b556685313b1446f8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 6a1679e342a7adc2b2371b6e3f69a898a7a5c717
Original-Change-Id: I2a0a2abbd79b4b5f756125dcbb6cbd9441016d4e
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/328543
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/13832
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add a country identifier field to NVS and populate it with the
call to wifi_regulatory_domain() which will (by default) do a
lookup for the 'region' identifier in VPD on a Chrome OS device.
BUG=chrome-os-partner:50516
BRANCH=glados
TEST=build and boot on chell
Change-Id: Ie7531848e620095732772c22156a85b7f8a6df5c
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: dafdb3760a0302e3effdc0e83977c1bfd5c9d3b2
Original-Change-Id: Ic83ab008045a469d0e0756f7e4d42f1b3894c529
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/329295
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/13839
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Set the UPD values for MemoryInit.
* Update the FspUpdVpd.h file which specifies the parameters for
MemoryInit.
* Add the necessary values to chip.h to enable values to come from
the mainboard's devicetree.cb file
* Add the parameters to the mainboard's devicetree.cb file
* Locate the platform configuration database file (pdat.bin)
* Copy the data values from the chip_info structure into the UPDs
* Display the UPD values
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Edit .config file and add the following lines:
* CONFIG_DISPLAY_UPD_DATA=y
* Testing successful when the UPD data is displayed before the call to
MemoryInit
Change-Id: Ic64f3d97eb43ea42d9b149769fc96bf78bf804f5
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/13896
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
On Apollolake CPU memory mapping is similar to previous SoC, and
we place CBMEM right under TSEG.
Change-Id: I606f690449ba98af6e9fc3074d677c7287892164
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/13883
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|