summaryrefslogtreecommitdiff
path: root/src/soc
AgeCommit message (Collapse)Author
2020-11-09soc/intel/xeon_sp: Look up the IIO_HOB only onceArthur Heymans
The HOB does not move, place its location in .bss. Change-Id: I2c6dbe4d64138e45fa1dfe7580ffa70d0441bd88 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47294 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/amd/common: add Kconfig help text to pre-family-17h-only blocksFelix Held
The cpu/car code only applies to pre-family-17h CPUs that still use cache as RAM (CAR) and the PI code only applies to the pre-FSP vendor code blob binaryPI interface. Change-Id: I5a13d7e202bb745255fabb46110850c36b07de7a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47274 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/jasperlake: Correct GPIO pad sequence for community pad groupMaulik V Vaghela
In gpio.c file, we have community group array for each comm, representing gpio groups within that community. Like there might be group H,D, VGPIO and C within community 1. Community also may have some reserved gpio and we also define those in an array which indicates OS can't use those GPIO (through PAD_BASE_NONE) Now when we define reserved pads in the middle of actual community pads, it creates an issue while calculating an offset for GPIO host own pad register. This is because function actually checks current gpio index (lets say vgpio_39 in our case) and tries to get group index from an array which we have defined. If we have defined reserved gpios in between 2 communities, index calculated will also account for reserved GPIO and register offset calculation will move to next set of register (offset 0xC instead of offset 0x8). Because of this coreboot won't configure HOST_OWN_PAD register correctly and driver will not be able to get non-SMI interrupts for related gpio. Align pad group as per EDS and pin-ctrl driver in linux kernel. Reference: DOC#618876 (EDS volume 2) BUG=None BRANCH=None TEST=VGPIO community index is correctly calculated. Drawlat board boots fine with this change and warm reset also works. Change-Id: Id6013914c88c50f4b8c60ca9a9285a8e1b214d11 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/jasperlake: Update reserved GPIO names in gpio_soc_defs.hMaulik V Vaghela
Multiple GPIOs were defined as a reserved GPIO in JasperLake. Correcting this GPIOs with proper name to align with EDS volume 2 Also removing unused GPIOs at the end of community 4 (group E). Since those reserved GPIOs are at the end of the community, it won't affect the offset calculations within community. This change will also help us aligning pad numbering with kernel pin-ctrl drivers too. Reference: DOC#618876 (EDS volume 2) BUG=None BRANCH=None TEST=Platform boots fine and basic functionality such as SD, Wifi works. Change-Id: I8326b7181d47a177261656f51602638d8ce80fbb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47232 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/jasperlake: Add PCH PCIe RPs wake up events to event logTim Wawrzynczak
All wakes by a PCH PCIe root port were lumped under one event source; this commit splits them up so each root port gets its own ID in the event log. BUG=b:172279061 BRANCH=volteer Change-Id: Icdb10043700c20ddb6ae93747a731005fd233a70 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/tigerlake: Add PCH PCIe RPs wake up events to event logTim Wawrzynczak
All wakes by a PCH PCIe root port were lumped under one event source; this commit splits them up so each root port gets its own ID in the event log. BUG=b:172279061 BRANCH=volteer Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Icebcac3b69c605ecf6df37733b641397ea3c3ad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-09soc/intel/common/acpi: create pep.asl from lpit.aslMichael Niewöhner
Copy lpit.asl to pep.asl to have a clean patch series without moving files and to be able to keep the replace-patch CB:46471 as small as possible to avoid confusion. Change-Id: Ib1c019039ef0c518cf678af6109ba914b7f47bb6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09intel/common/pmc: Add functions for IPC mailbox in ACPIDuncan Laurie
This change adds two functions that provide an IPC mailbox method via ACPI for runtime clock configuration. pmc_acpi_fill_ssdt_ipc_write_method() will provide a method in the SSDT that can be called by other ACPI devices to send an IPC mailbox command. This function is exported because some SOCs override the default PMC device and need to call this function to write the method into the SSDT. pmc_acpi_set_pci_clock() will call the method defined by the previous function to enable or disable the PCIe SRCCLK for a specified root port and clock pin. It can be called by the PCIe root port after turning off power to the attached device. BUG=b:160996445 TEST=boot on volteer device and disassemble the SSDT to ensure that this method exists. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I95f5a1ba2bc6905e0f8ce0e8b2342ad1287a23a0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46259 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-09soc/intel/tigerlake: Utilize vbt data size Kconfig optionSrinidhi N Kaushik
From Tigerlake FSP v3373 onwards vbt binary size changed from 8KiB to 9KiB. Commit cf5d58328fe004d967466be42de62d6bab4c3133 had changed the size from 8 to 9 Kib in drivers/gma. This change makes use of Kconfig option to pick the size for tigerlake. BUG=b:171401992 BRANCH=none TEST=build and boot delbin and verify fw screen is loaded Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I21a0bba9ae01bac326f0f931641c98e8d308310f Reviewed-on: https://review.coreboot.org/c/coreboot/+/47209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-09soc/intel/*/chip: Remove unused devicetree entryPatrick Rudolph
InternalGfx isn't used so drop it. Change-Id: I12f424d8d883e065ef8d007e56a8bff41a7fae53 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-09acpi: Call acpi_fill_ssdt() only for enabled devicesKarthikeyan Ramasubramanian
Individual drivers check whether the concerned device is enabled before filling in the SSDT. Move the check before calling acpi_fill_ssdt() and remove the check in the individual drivers. BUG=None TEST=util/abuild/abuild Change-Id: Ib042bec7e8c68b38fafa60a8e965d781bddcd1f0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47148 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-11-09soc/intel/xeon_sp/skx: Reorder soc_util.cMarc Jones
Reorder soc_util.c and remove the un-needed #if ENV_RAMSTAGE to match cpx version in preparation for more de-duplication. Change-Id: Iab343e903e2478709fe91739c9ca77f587286df7 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-07soc/amd/common: Don't program GPIOs if the table isn't setMartin Roth
Currently, there's no check for the table being programmed. This skips programming a table if the table size is zero, or the pointer to the table has been set to NULL. BUG=None TEST=Set table pointer to NULL, table doesn't run. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I7d09b47e7d619428b64cc0695f220fb64c71ef4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-11-07soc/amd/common/psp: expand CPU family names in Kconfig help textFelix Held
Expand fam17h to family 17h to make the help text slightly easier to understand and add family 19h to the description of SOC_AMD_COMMON_BLOCK_PSP_GEN2. Change-Id: I9284c9c638e1d217d4605523dde004781f4343f9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-07mb/intel: Enable ALC711 Audio codec over SNDW0 linkSridhar Siricilla
The patch enables ALC711 Audio codec. Test=Verified on ADL RVP. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I73f480dad1047cebd7ffc66e0104ff10cacc300b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2020-11-06sc7180: Correct mmu configuration for AOP SRAM regionsT Michael Turney
NOC errors detected at runtime in AOP SRAM region strongly suggested speculative memory accesses were occurring in memory regions that either don't exist or are device memory rather than SRAM. Signed-off-by: T Michael Turney <mturney@codeaurora.org> Change-Id: I6611dc614c80063c7df057b59337417c8f56fd9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-06soc/amd/picasso: add Raven1 GPU PCI IDFelix Held
Change-Id: Id4460eb596b080dec1a63a20869182170c3388af Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47250 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06soc/amd/picasso/cpu: add Raven1 CPUID to CPU tableFelix Held
The RV1 CPUID is already in the cpu.h file, but was still missing from the CPU table in cpu.c. Change-Id: Iad78cbe933b40e946d421e4c93e523f9e31f1089 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47249 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06soc/amd/picasso: Set vboot hashing block size to 36kMartin Roth
On picasso's psp_verstage, the vboot hash is being calculated by hardware using relatively expensive system calls. By increasing the block size, we can save roughly 150ms of boot and S3 resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I6642073357327811b415dcbcad6930ac6d2598f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46903 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06soc/amd/picasso: Up stack size to 40k for vboot hash bufferMartin Roth
Increasing the vboot hash buffer size greatly speeds up the SHA calculations. Going from a standard 4k buffer to a 36k buffer takes ~150ms of the boot and resume time. TEST=Build & boot see that boot time has decreased. BRANCH=Zork BUG=b:169217270 - Zork: SHA calculation in vboot takes too long Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ibca868ad7be639c2a0ca1c4ba6d71123d8b83c92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46902 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06soc/intel/xeon_sp/skx: Fix MADT CPU indexesMarc Jones
The CPU index wasn't getting updated. Confirm MADT sets IOAPIC and CPU ID numbers. Change-Id: I72430cc48f4609ac408e723172ba1ed263cca8e3 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-11-06soc/intel/xeon_sp: Move CPU helper functionsMarc Jones
Continue Xeon-SP de-duplication. Move CPU helper functions from skx/ and cpx soc_util.c to common util.c. Functions only used by util.c are updated to be static. The following functions are moved: int get_threads_per_package(void); int get_platform_thread_count(void); const IIO_UDS *get_iio_uds(void); unsigned int soc_get_num_cpus(void); void get_core_thread_bits(uint32_t *core_bits, uint32_t *thread_bits); void get_cpu_info_from_apicid(uint32_t apicid, uint32_t core_bits, uint32_t thread_bits, uint8_t *package, uint8_t *core, uint8_t *thread); void xeonsp_init_cpu_config(void); Change-Id: I118a451b9468459cf2c2194f31da1055e1435ebe Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47170 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06soc/intel/xeon_sp/cpx: Reorder cpu.c .h includesMarc Jones
Clean up the header includes. Change-Id: I9f61d1a82b37bc0ed803967dc64decf18f44adc9 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2020-11-06amdfwtool: Use shell command to get depend file listZheng Bao
The amdfwtool is not available at the beginning of the building. So it may have error if it is missing. Change-Id: Id4db70986755cef8e98877c4e92841b25ced5452 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-06soc/amd/picasso: Update coreboot UPD variable names to include unitsZheng Bao
Use command below to change the variable globally. sed -i "s/\<variable\>/variable_u/g" `grep variable -rl ./ \ --exclude-dir=build --exclude-dir=crossgcc` BUG=b:171334623 TEST=Build Change-Id: I056a76663e84ebc940343d64178c18cb20df01a3 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-05soc/intel/tigerlake: Disable C1 C-state DemotionRavi Sarawadi
Disable C1 C-state auto demotion to decrease SoC power usage. When set, processor will conditionally demote C3/C6/C7 requests to C1 based on uncore auto-demote information. BUG=b:161215906 TEST=Measure and confirm SoC power usage reduction for key use cases eg 'Google Meets video call' Measured on instrumented boards for Volteer EVT and Delbin. Below measurements for Volteer: Google meets with 720p w/ auto-demotion w/o auto-demotion System Power 13.14W 9.4W SOC Power 7.9W 5.4W Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Signed-off-by: Shweta Malik <shweta.malik@intel.com> Change-Id: I649cafbaf03917d76521aa5f76ec58d218e1a1b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-05soc/amd/picasso: move MAX_CPUS setting from mainboard to SoC KconfigFelix Held
Since the mainboard Kconfig is sourced before the SoC one, it would still be possible to override this setting at mainboard level, even though that shouldn't be needed. The maximum CPU count for Picasso is 8, since the chips have only up to 4 cores with up to two threads each. Change-Id: I53449b8fa73c5d13e6ea77bee6eed8896b7d3ec3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47205 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-05soc/intel/xeon_sp: Use common cpu/intel romstage entryArthur Heymans
This removes some boilerplate like starting the console and also adds a "start of romstage" timestamp. Change-Id: Ie85df5d244fa37c41f0b3177ca325c607fa54593 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04soc/intel/broadwell: Merge `device_nvs.asl` into `globalnvs.asl`Angel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: If5f1feb0cd43fe1e0514b4e3fa766da60e2b7603 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46773 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Include EC and IRQ links ACPI earlyAngel Pons
Other southbridges such as Lynx Point do it. This eases merging later. Change-Id: I10196bbc44ce859c2747755845378351f45944ae Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46766 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch: Use common PCIe ACPI codeAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: I1f41ce943e25dceab79c7d7ee2ed797c392dcd52 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46763 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch/acpi: Add PCIe register offsetsAngel Pons
These are present in common southbridge ACPI code, and also exist on Broadwell. Thus, add the definitions to align with common ACPI code. Change-Id: Ib0ad9da80920fe7c70986e541c50f6adccb49d0c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46761 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/gma.c: Align struct with HaswellAngel Pons
Change-Id: Ifd1fb02497e1d326b6b9c5752f471f52b145a8ef Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-11-04soc/intel/broadwell: Use common irqlinks.aslAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I9179c1b449925cc66628fc3266652b8237ab49e5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46759 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell/pch/acpi/irqlinks.asl: Add missing IRQsAngel Pons
Commit 2e1f764 (sb/intel/common/acpi/irqlinks.asl: Add missing IRQs) added these IRQs for Lynx Point and earlier southbridges. Follow suit for Broadwell, since it also supports them. Vendor firmware of the Asus X555LAB laptop also contains these IRQs, as per the disassembled DSDT. Change-Id: If857352dd25ba61c1f09c1ff4358efafdc3a5c73 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46758 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/broadwell: Align ACPI with Haswell/LynxpointAngel Pons
Drop unnecessary smbus.asl in favor of southbridge common code. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 does not change. Change-Id: I13b35d2155a2cede0a56846b8bf8a79d4ebfc7b3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46757 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/amd/common/psp: move v1-only mailbox commands to separate sectionFelix Held
Two of the PSP mailbox commands are only applicable to the first generation of PSP mailbox interface. Change-Id: Ice940ee780c3d96ae1d9ec7ba49ea4add00e8723 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-04soc/intel/xeon_sp: Add a smm_region functionArthur Heymans
This reports where TSEG is located and will be used when setting up SMM. Change-Id: I9a89cc79b08e2dcf1ffb91aa27d92c387cc93bfd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-04soc/intel/xeon_sp: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I43e36f2e736192603be61519d3e185605e81f0e8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-04soc/amd: Change FIRMWARE_LOCATE to FIRMWARE_LOCATIONZheng Bao
Change-Id: I3a3d187fc24ab752dfe61893c15561a92d009fe2 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46062 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/skl,acpi/acpigen: convert global CPPC package to local oneMichael Niewöhner
Move the global CPPC package \GCPC to the first logical core CP00 and adapt the reference in the other cores. This is cleaner and avoids confusion. Test: dumped SSDT on Supermicro X11SSM-F and verified decompiled version Change-Id: I40b9fd644622196da434128895eb6fb96fdf254d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-04soc/intel/xeon_sp: Pass IIO_RESOURCE_INSTANCE as pointerJacob Garber
IIO_RESOURCE_INSTANCE is a large struct, so it should be passed as a constant pointer rather than making a copy. Found-by: Coverity CID 1432759 Change-Id: Iebbb4d292f4d956e767bda28cbf20b0318586510 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46729 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-04soc/intel/xeon_sp/cpx: Align coreboot CAR symbols to FSP-TArthur Heymans
The CAR set up by FSP-T is at base 0xfe800000 and has a 0x200000 size. FSP-M seems to have a very large stack usage so it would overflow other car symbols located below the coreboot stack such as timestamps and the pre-ram console, which are now fixed. TEST: boot with ocp/deltalake. Change-Id: I886f9391ad79fcfa0724109393e3781a08d954b4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46895 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel/{tgl,jsl}: Enable logging of wake sources for S0ixFurquan Shaikh
This change adds elog.c to smm-y for Tiger lake and Jasper Lake platforms to enable the logging of wake sources in eventlog for S0ix. BUG=b:172272078,b:169731044 BRANCH=volteer TEST=Verified on volteer that wake sources are correctly logged for S0ix: 8 | 2020-11-02 13:54:27 | S0ix Enter 9 | 2020-11-02 13:54:33 | S0ix Exit 10 | 2020-11-02 13:54:33 | Wake Source | RTC Alarm | 0 11 | 2020-11-02 13:54:49 | S0ix Enter 12 | 2020-11-02 13:54:54 | S0ix Exit 13 | 2020-11-02 13:54:54 | Wake Source | Power Button | 0 14 | 2020-11-02 13:55:04 | S0ix Enter 15 | 2020-11-02 13:55:10 | S0ix Exit 16 | 2020-11-02 13:55:10 | Wake Source | GPE # | 112 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie1c40dfba6c82ca45a21d35c5a2725e4d30855d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47141 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel/broadwell: Relocate PCH ACPI filesAngel Pons
Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I7f87085c70149d02c544e2d43e1bdb58c7502d6d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46754 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03Revert "broadwell: Switch to using common ACPI _SWS code"Angel Pons
This reverts commit 81a4c85acf664156bb68807f681cd40928bf8267. Reason for revert: Blocks merging Haswell and Broadwell together. Tested on out-of-tree Acer Aspire E5-573, still boots. Change-Id: I29c4ad9174ab84c7e9111daa0491ede9e1d639b4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46734 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel/xeon_sp/acpi: Fix uncore dsdt for multiple cpusMarc Jones
Fix the asl to use CONFIG_MAX_CPUS to create entries for multiple cpu uncores. Don't add the RTxx resource entries multiple times. The function is called for each CPUs. Change-Id: Ia4eb9716ae4bd72fb4eb98649105be629623cbef Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47060 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-03soc/intel/xeon_sp; Use soc specific stack-port functionMarc Jones
Separate the get_stack_for_port into soc specific functions. This removes a #if in common code. Change-Id: Ib38a7d66947ded9b56193a9163e5128b2523e99c Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-11-03soc/intel/common/block/systemagent/memmap.c: Align cached regionAngel Pons
When asked to place cbmem_top(), FSP does not seem to care about alignment. It can return an address that is MTRR poison, which will exhaust all variable MTRRs when trying to set up caching for CBMEM. This will make memory-mapped flash and TSEG caching fail as well. Safeguard against this by aligning the region to cache to half of its size, and move it upwards to compensate. It is assumed that caching memory above the provided bootloader TOLUM address is inconsequential. TEST=Boot Purism Librem Mini WHL, observe no MTRR exhaustion error messages in console. The boot process also feels more fluid. Change-Id: Ic64fd6d3d9e8ab4c78d68b910a476f9c4eb2d353 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-03soc/intel: Select SOC_INTEL_COMMON_BLOCK_CAR as per alphabetical orderSubrata Banik
Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I7adf430e6ce5f78f68a0c73af841fbdc62bb5dc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47057 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02soc/amd/picasso: pass verstage timestamps to x86Kangheui Won
Initialize timestamp table with data from psp_verstage on bootblock. PSP keeps its own timestamp and pass it in transfer_buffer. However PSP timestamp and TSC may be out of sync so we can't just merge two tables without modification. info->timestamp contains PSP's clock value (in us) when x86 processor released and base_timestamp contains TSC value when bootblock is started. The time between x86 release and bootblock entry should be very short so we can think those two happened at the same time and use them for sync. In some cases there will be underflow in timestamp entries but cbmem utility can handle wrap-over in entries. Few timestamp values including 1st timestamp can be very large but we can still get the time spent on boot without any problem. BUG=b:159220781, b:167148121, b:171422583 BRANCH=zork TEST=boot to kernel, run 'cbmem -t' and check verstage timestamps are included in the result. Change-Id: I5e89bb54f478153fb40ba51b5ab61fa20af3b99a Signed-off-by: Kangheui Won <khwon@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45059 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02soc/amd/picasso: add monotonic_timerKangheui Won
On Zork(picasso) platform we run verstage on the PSP. It has its own timer, but the frequency is not matched with TSC. To ease the work to merge timestamps from the PSP and TSC, add a layer around tsc to have microsecond granularity for timestamp table. PSP already records timestamp in microseconds. BUG=b:159220781 BRANCH=zork TEST=build, flash and boot, check timestamps are correct Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ifced4a84071be8da547e252167ec21cd42f20ccc Reviewed-on: https://review.coreboot.org/c/coreboot/+/46058 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02sc7180: Fix prefill requirement and correct the fetch start checkVinod Polimera
With Innolux panel timings, the fetch_start has evaluated to be more than v_total which is invalid. Add a check to accommodate the extra h_total addition in fetch_start calculation. Secondly, made the prefill line requirement same as Kernel driver. Change-Id: If7624c0b28421759fdf47dd92f23214a78058199 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-02sc7180: Add Modem region in memlayout to avoid modem cleanup in Secboot reboot.mkurumel
two different modem regions wifi and lte to be handled in QC_SEC and modem Change-Id: Ib4592ca66d3d0db4c4768be4cd27422fe9f786b8 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-02soc/intel: Use of common reset code blockSubrata Banik
This patch removes all redundant reset code block from each SoC and make use of common reset code block(fsp_reset.c) based on SOC_INTEL_COMMON_FSP_RESET. Respective SoC Kconfig to choose correct FSP global reset type as per FSP integration guide. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I71531f4cf7a40efa9ec55c48c2cb4fb6ea90531f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02soc/intel/common: Create common Intel FSP reset code blockSubrata Banik
Create SOC_INTEL_COMMON_FSP_RESET Kconfig to have IA common code block to handle platform reset request raised by FSP. The FSP will use the FSP EAS v2.0 section 12.2.2 (OEM Status Code) to indicate that a reset is required. Make FSP_STATUS_GLOBAL_RESET depends on SOC_INTEL_COMMON_FSP_RESET. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I934b41affed7bb146f53ff6a4654fdbc6626101b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02soc/intel/denverton_ns: Add PCH_DEVFN_PMC for finding PMC deviceDuncan Laurie
In order to support the common PMC functions this device needs to be able to be located with the common lookup macro. BUG=b:160996445 TEST=build intel/harcuvar board Change-Id: If04a82582c07c15bf841d0baa84e31561d211502 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46642 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02soc/intel/jasperlake: Set the GpioOverride configurationRonak Kanabar
Set "GpioOverride" config to override FSP gpio configuration. FSP will not configure any GPIOs and rely on GPIO settings programmed before moved to FSP. BUG=b:150666058 TEST=Build and boot JSLRVP Cq-Depend: TBD Change-Id: Ia4036cf0be3a6036d70920743958dc327a652077 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45901 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02soc/intel/fsp-car: Use the coreboot defined stackArthur Heymans
The stack needs to be in the coreboot defined region to not collide with other symbols. Change-Id: I02a379d2ac73ae30239bd45859c3f09de1a9d0e0 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-11-02soc/intel/xeon_sp/bootblock.c: Report the FSP-T outputArthur Heymans
Change-Id: I03841f8263203ee306f83b8f8e859ec03edc3bd3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46885 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02drivers/intel/fsp2_0: Add function to report FSP-T outputArthur Heymans
This allows to compare the FSP-T output in %ecx and %edx to coreboot's CAR symbols: Change-Id: I8d79f97f8c12c63ce215935353717855442a8290 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-02soc/intel/common/cse: Add dependency on SOC_INTEL_CSE_LITE_SKUFurquan Shaikh
This change adds the dependency on SOC_INTEL_CSE_LITE_SKU for the following configs: 1. SOC_INTEL_CSE_FMAP_NAME 2. SOC_INTEL_CSE_RW_CBFS_NAME 3. SOC_INTEL_CSE_RW_FILE These configs aren't really useful for platforms not using CSE Lite SKU. Change-Id: Id48ab36b7e75301d50122916d153f494d755ae77 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46905 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
This change reorganizes the CNVi device entries in mainboard devicetree/overridetree and SoC chipset tree to make it consistent with how other SoC internal PCI devices are represented i.e. without a chip driver around the SoC controller itself. Before: chip drivers/wifi/generic register "wake" = "..." device pci xx.y on end end After: device pci xx.y on chip drivers/wifi/generic register "wake" = "..." device generic 0 on end end end Change-Id: I22660047a3afd5994400341de0ca461bbc0634e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-11-02soc/intel: Add a driver for CNVi WiFi/BT controllersFurquan Shaikh
This change adds a common block driver for CNVi WiFi/BT controllers in Intel SoCs. This driver uses the common PCI dev operations in addition to generating ACPI device node and returning ACPI name for the controller device. This change also selects this driver for CML, GLK, ICL, JSL and TGL. Change-Id: I69a832be918d4b9f4fbe3a40913d4542a457a77c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-11-02soc/amd/picasso: Put transfer buffer into common ld fileMartin Roth
Instead of having the same linker layout for the transfer buffer between the x86 & PSP linker layout scripts, put the common layout into a file shared between the other linker scripts. BUG=None TEST=Boot zork board, verify the buffers are aligned. BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ib9d9d8b046bc9e9e7a4ee939324960bfc44c3508 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-30x86: Add a minimal example SoC along with a boardNico Huber
The min86 example SoC code along with the example mainboard should serve as a minimal example how a buildable x86 SoC code base can look like. This can serve, for instance, as a basis to add new SoCs to coreboot. Starting with a buildable commit should help with the review of the actual code, and also avoid any regressions when common coreboot code changes. As the example code itself is build-tested, it should advance with coreboot and can't rot like documentation might. It also serves as a check what APIs need to be implemented with the default Kconfig settings. Change-Id: Id76ab15fe77ae3e405c43f9c8677694f178be112 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45710 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/xeon_sp: Call common soc_get_num_cpus()Marc Jones
Use a common function to get the number of CPUs for each soc. This removes a #if for different function names in the common code. Change-Id: I3348d37fcae72247731e465ec2a65d9583a2f180 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-30soc/intel/xeon_xp: Combine cpx and skx acpi.cMarc Jones
Prepare for common ACPI. Combine cpx and skx acpi.c into a single file in xeon_sp. This is almost the last step in using common/block acpi. Change-Id: I5f40eb7909bb796907682c548219c7515f2ae4d1 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46600 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/xeon_sp/skx/acpi.c: Update with cpx changesMarc Jones
Prepare for common ACPI. This primarily makes the skx madt table generation match cpx. There are a few other small changes to remove unused code and make the files match. Change-Id: I71a59181226d79c40a4af405653c50c970fb720b Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46599 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/tigerlake: Enable TCSS XHCI device and define port aliasesDuncan Laurie
Enable the USB4 XHCI driver and remove the ACPI name entry from the SOC level function. Define aliases for the USB2/3 ports on north and south XHCI devices in chipset.cb so they can be referenced in the mainboard devicetree. BUG=b:151731851 TEST=define usb ports by reference in volteer devicetree and ensure they get properties added in SSDT for both north and south XHCI device. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I724ca874d3a3f6a2b43a700b0b10f77f25c53ee0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-30soc/intel/common/block/usb4: Add TCSS XHCI driver for SSDT generationDuncan Laurie
In order to generate ACPI entries for USB devices attached to the USB4/TBT/TCSS/North XHCI device it needs to have a driver that will enumerate static devices on the bus. This driver does that and nothing else. BUG=b:151731851 TEST=boot on volteer and check for USB devices on \_SB.PCI0.TXHC.RHUB Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I5a2ff1cd1bed557e793d45119232cf87032ddd7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/46851 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/xeon_sp: Move read_msr_ppin() to common util.cMarc Jones
Move CPX and SKX read_msr_ppin() to common util.c file. Update drivers/ocp/smbios #include to match. Change-Id: I4c4281d2d5ce679f5444a502fa88df04de9f2cd8 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-30soc/intel/xeon_sp: Move common chip.c codeMarc Jones
Move common CPX and SKX chip.c code to chip_common.c. Change-Id: I158882ab15659858c2b13b4a3e02a26ef8d4ed3c Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-30soc/intel/xeon_sp/skx: Simplify pci_domain_read_resourceMarc Jones
Use a simpler pci_domain_read_resource for the stacks. This makes it the same as the cpx function, since both get the stack information from the FSP. This will be merged with common xeon cpx/skx in a later patch. Change-Id: I0130ce671fe9ff04e48021a0c5841551210aa827 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46308 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/xeon_sp/skx: Add resource allocator helpersMarc Jones
Add and use resource allocator helper functions from cpx. It also simplifies the allocator by removing IORESOURCE_PCI64 from the resource type check. It isn't needed since it is an attribute of IO and MEM and will be added with the appropriate type. This clean up matches CPX and will help with merging in the future. Change-Id: I5812b07ba00eeafb4d1e826e9cdf9a659b0248bb Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46306 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/tigerlake: Replace soc_get_pmc_mux_device with device pointersTim Wawrzynczak
Now that device aliases can be used in the devicetree, the hacky function 'soc_get_pmc_mux_device' can be removed and replaced with pointers to the devices the function was supposed to return (1 for each port). Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie00834c79bd5304998adaccb388ae74a108192b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45747 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30{soc/amd,sb/amd/hudson}: Fix generating the ACPI mcfgArthur Heymans
The last argument for acpi_fill_mcfg() is the last PCI bus, which is an uint8_t, not the total number of busses, which overflows the argument if CONFIG_MMCONF_BUS_NUMBER is 256. Change-Id: I8887e14128dbe54688eb6e803d6694b7c29956c1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-10-30vc/amd/fsp: Update bl_errorcodes_public.hMartin Roth
Replace the initial bl_errorcodes_public.h (a temporary, minimal version) with the full version released by AMD. BUG=None TEST=Build BRANCH=Zork Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I82585c74d74139a96419b9bffe1df3b8c344eb5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-10-30soc/amd/picasso: Fix the PSP SMI trigger infoMarshall Dawson
Align coreboot's PSP MboxBiosCmdSmmInfo setup to how AGESA's PSP library was implemented. The trigger address must be an SMI trigger register. Assign one of the reserved triggers to the PSP. The #define of SMITYPE_PSP 33 is still correct and is intentionally unmodified. This patch should be innocuous as the system doesn't currently support SMI-based features of the PSP. The call only exists so the PSP will honor a mailbox command during S3 suspend. BUG=b:171815390 TEST=Run SST on Morphius BRANCH=Zork Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I74029271a522a4f23e54fd76f99a8e3eb0dd4d55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46854 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30amdfwtool: Take a config file instead of command line parametersZheng Bao
To verify the consistency, see if timeless builds with and without this patch result in identical coreboot.rom files. BUG=b:154032833 TEST=Build & boot on mandolin Change-Id: Icae73d0730106aab687486e555ba947796e5e757 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-10-30soc/intel/broadwell: Drop reg-script to finalize PCHAngel Pons
Tested on out-of-tree Acer Aspire E5-573, still boots. Change-Id: I3b9ae75842e3ec1ecd02323d104a9f1d45564172 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46710 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/broadwell: Relocate PCH finalisation codeAngel Pons
Change-Id: I94a4194e935fddb99645ed2929bdd70583c2fd5b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46709 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/broadwell: Get rid of `cpu_is_ult`Angel Pons
It is only used in a single file, on two functions that already check whether coreboot is running on a Haswell or a Broadwell processor. Change-Id: I86e1061f722e6d6855190c2fd863d85fc24a1ee0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46708 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/broadwell: Inline CPUID helpersAngel Pons
These functions are small and used in various stages. Inline them. Change-Id: I0d15012f264dbb0ae2eff8210f79176b350b6e7f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46707 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/broadwell: Move PCH code into pch subdirAngel Pons
Change-Id: Icb57eb89b4f225298e43ae27970dc1e27fb6e222 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46706 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/broadwell: Separate PCH in devicetreeAngel Pons
Flesh out the PCH configuration into a separate chip. Keep it within the Broadwell SoC directory for now, to ease moving files around. The boards were prepared beforehand and the devicetrees require next to no changes. Tested on out-of-tree Acer Aspire E5-573, still boots. Change-Id: I28d948f3e6d85e669d12b29516d867c1d1ae9e1a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46700 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30Revert "broadwell: update processor power limits configuration"Angel Pons
This reverts commit fa42d568a00e5daadd35722790c529539227130e. Reason for revert: Passes in an incompatible structure and only happens to boot by chance. Moreover, Broadwell will soon be merged with Haswell and this requires Broadwell to not depend on any Intel common SoC code. Tested on out-of-tree Acer Aspire E5-573, PL values are correct again. Change-Id: I6e8e000dba8ff09fab4e6f174ab703348dcd6a96 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45011 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30soc/intel/broadwell/cpu.c: Re-add `configure_thermal_target`Angel Pons
Commit 360684b (soc/intel/common: add TCC activation functionality) made Broadwell use common SoC code. However, this makes Broadwell depend on SoC code, which prevents splitting Broadwell into CPU, northbridge and southbridge, a stepping stone before merging with Haswell and Lynxpoint. Tested on out-of-tree Acer E5-573, still boots. Change-Id: Ib7ab4e75bd4416dde4612e67405a871da569008a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46731 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29soc/intel/xeon_sp: Move function debug macrosMarc Jones
Move the macros for printing debug information to debug.h in the common console include directory and device include file. These are available if the platform selects DEFAULT_CONSOLE_LOGLEVEL_8. The macros could be used by any platform. Change-Id: Ie237bdf8cdc42c76f38a0c820fdc92e81095f47c Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-29include/device/device.h: Move resource debug macrosMarc Jones
Add general debug macros that print resource information. These are available to select if DEFAULT_CONSOLE_LOGLEVEL_8. The macros are helpful in debugging complex resource allocation with multiple buses. The macros are moved from soc/intel/xeon_sp, where they were originally developed. Change-Id: I2bdab7770ca5ee5901f17a8af3a9a1001b6702e4 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-10-29mb/intel/adlrvp: Add dq_pins_interleaved into 'struct mb_cfg'Subrata Banik
List of changes: 1. Split mem_cfg for DDR4 and LPDDR4 as per board_id 2. Move dq_pins_interleaved into board-specific memory configuration information TEST=Able to build and boot DDR4 and LPDDR4 ADLRVP SKUs. Change-Id: I6ef19209767c810426bba0c8bc48178bf2e2a110 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46873 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-29soc/mediatek/mt8192: Do dram full calibrationHuayang Duan
If no correct params were found in flash, do dram full calibration. Full calibration will load blob, dram.elf. Blob version: v3, size: 320KB. Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I2d4437a4e4c770de084927018d4dd3f2e8b87fb1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-28soc/intel: deduplicate ACPI timer emulationMichael Niewöhner
The code for enabling ACPI timer emulation is the same for the SoCs SKL, CNL, ICL, TGL, JSL and EHL. Deduplicate it by moving it to common code. APL differs in not having the delay settings. However, the bits are marked as "spare" and BWG mentions there are no "reserved bit checks done". Thus, we can write them unconditionally without any effect. Note: The ACPI timer emulation can only be used by SoCs with microcode supporting CTC (Common Timer Copy) / ACPI timer emulation. Change-Id: Ied4b312b6d53e80e71c55f4d1ca78a8cb2799793 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-10-28soc/amd/picasso/acpi: Include platform.aslJosie Nordrum
Include platform.asl to link acpi methods for _INI, _WAK, and _PTS to correctly enable backlight in OS for zork. BUG=b:158087989 BRANCH=Zork TEST=check backlight during reboot and suspend Signed-off-by: Josie Nordrum <JosieNordrum@google.com> Change-Id: I702f807a5907d85d083295cf339ba9d31b246627 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-28soc/amd/common/acpi: Create platform.asl to define acpi transitionsJosie Nordrum
Define device _WAK, _PTS, and _INI acpi methods with callbacks into mainboard methods if provided. BUG=b:158087989 BRANCH=Zork TEST=tested backlight during reboot and suspend Signed-off-by: Josie Nordrum <josienordrum@google.com> Change-Id: I8020173a15db1d310459d5c1de3600949b173b00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46669 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-28src/soc/intel/xeon_sp: Fill in the cache information in SMBIOS type 7Morgan Jang
TEST=Execute "dmidecode -t 7" to check if cache error correction type and cache sram type is correct for each cache level Change-Id: Ibe7c6ad03a83a6a3b2c7dfcfafaa619e690a418d Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-28soc/intel/xeon_sp/cpx: Set SLEEP_BUTTON flag in ACPI FADTMorgan Jang
Keep SLEEP_BUTTON flag in ACPI FADT to indicate that no sleep button is present on Cooperlake platform. Change-Id: I2ce435a7bda780b2d2ed00be3f3a8a080c4434ab Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-28mb/ocp/deltalake: Rename motherboard_fill_fadt()Jingle Hsu
Rename motherboard_fill_fadt() to the common override mainboard_fill_fadt() function to override FADT. Tested=On OCP Delta Lake, verify FADT PM Profile is set to Enterprise Server. Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com> Change-Id: Ie9ea7cc6e712d0aca57bbeac1a4154921d123be4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-10-26soc/amd/picasso/acpi: Convert to ASL 2.0 syntaxElyes HAOUAS
Change-Id: I1cabe0f55ec55a84f8e9028565be69c9dd997e7c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-10-26Revert "soc/intel/jasperlake: Allow mainboard to override chip configuration"Karthikeyan Ramasubramanian
This reverts commit 5acea15d63e821a1bc416d206162ed030cd5d57c. This change got accidentally merged. There is no need for mainboard to override chip configuration. BUG=None TEST=Build and boot Drawlat to OS. Change-Id: I166ba7e5ee50a6329032eae8e17b9a554b094e2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 17:43:46 +0000