| Age | Commit message (Collapse) | Author |
|---|
|
This patch enable and configure the clocks and IOMUX for i2s audio path,
and the i2s0 clock is from CPLL.
Please refer to TRM V0.3 Part 1 Chapter 3 CRU, P126/P128/P144/P154/P155
for the i2s clock div and gate setting.
BRANCH=none
BUG=chrome-os-partner:52172
TEST=boot kevin rev1, press ctrl+u and hear the beep voice.
Change-Id: Id00baac965c8b9213270ba5516e1ca684e4304a6
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 9c58fa7
Original-Change-Id: I130a874a0400712317e5e7a8b3b10a6f04586f68
Original-Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/347526
Original-Commit-Ready: Wonjoon Lee <woojoo.lee@samsung.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15034
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Set board GPIOs as required and add their description into the
appropriate section of the coreboot table, to make them available to
depthcharge.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=with the rest of the patches applied it is possible to use
keyboard on Gru, which indicates that the EC interrupt GPIO is
properly configured. The rest of the pins will be verified later.
Change-Id: I5818bfe855f4e7faa2114484a9b7b44c7d469727
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: e02a05f
Original-Change-Id: I82be76bbd3211179e696526a34cc842cb1987e69
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/346631
Reviewed-on: https://review.coreboot.org/15031
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This defines mux settings for the GPIO bank responsible for SPI
interface #5.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=with the rest of the patches applied it is possible to
communicate with the EC on gru: pressing Ctrl-U during boot
allows to start Chrome OS from the SD card.
Change-Id: Ibc2293b5662892f7b275434f9a672ef68edf4f9e
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 4f92452
Original-Change-Id: Idf55c069b05492f8cdc204a8c273e39a19a3aef3
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/346630
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-on: https://review.coreboot.org/15030
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Update the DDR config and DRAM driver to allow running at up to
928MHz. Kevin config/clock rate are not being changed, but Gru now
runs at 928 MHz.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=booted Kevin and Gru to Linux prompt. Ran stressapptest for 10 min on Gru,
Change-Id: I66c1a171d5c7d05b2878c7bc5eaa0d436c7a1be2
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 8baf0d82816a7ea1c4428e15caeefa2795d001f9
Original-Change-Id: I5e1d6d1025f10203da8f11afc3bbdf95f133c586
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/343984
Original-Reviewed-by: Stephen Barber <smbarber@chromium.org>
Reviewed-on: https://review.coreboot.org/15027
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Fix bug introduced by merging http://review.coreboot.org/9606 and
http://review.coreboot.org/10740 in the wrong order.
Change-Id: I75dd22cd0cf30c7d91e4fa5171cb482a80eb64ca
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15070
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch enables eDP display by:
o. setting HPD pinmux, backlight, vdd for eDP
o. setting vop mode
o. enabling VGA configs for edid
BRANCH=none
BUG=chrome-os-partner:51537
TEST=The dev screen is shown on kevin board
Change-Id: If8b07307454daa88727d317cc208d6c97de07ad7
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: b1ad9337510f5437f691153dc68883edf273e4c7
Original-Change-Id: Id7006619b5be638b286a5402d892a5361ac1e430
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/340026
Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-on: https://review.coreboot.org/14858
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch adds functions to init the display. To set up the display,
initialize the eDP and read the EDID. Based on these, we then
set the clock for VOP, and finally enable VOP and backlight.
For a mainboard, it should set the vop_id, vop_mode and
framebuffer_bits_per_pixel in devicetree.cb.
For VOP_MODE_AUTO_DETECT, it will try eDP first and then
HDMI (which is not supported yet).
EDIT: Updated Makefile to only build in new files if
MAINBOARD_DO_NATIVE_VGA_INIT is enabled. All of these
platforms should have it enabled, so this shouldn't make
any difference except now, before the platform code is
in place.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=test with the other patch
Change-Id: If935415026c945ab6ee128bd6bbdd792890aa24a
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: c1020cc806775629f4d5dc57bd805a9a12169386
Original-Change-Id: Ic32d0a251cb8e08aa5f0b15b2c06c4e02c08a761
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342336
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14857
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
If booting from sdcard/usb, kernel can't recognize the
/dev/mmcblk0.
Before kernel find it's root cause, we add this workaround
patch to enable clk for emmc.
BRANCH=none
BUG=chrome-os-partner:52873
TEST=boot from sdcard and check the /dev/mmcblk0 exists
Change-Id: Ie36cc6fdbc24db8c30984c02ccfe2f8aaaf30cd2
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 39b87ec3c73d6f56efc8c3f52b7ed759e548ee85
Original-Change-Id: I88a9cc2e3ea5a56aadfdbd94ef910daaf92a7eb7
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/341632
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14856
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Select aclk_emmc and clk_emmc source from GPLL, and both to 198MHz,
that is GPLL(594MHz) divided by 3.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot kevin rev1 to chromeos prompt from both emmc and sdcard
TEST=LoadKernel faster, more than twice as I measured manually.
Change-Id: I2580c43b8c79049c3fe16bbf60bfa1a8e0559948
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 5fd37b66dcce77354e1cafab0d6e806d832c08d2
Original-Change-Id: Id22815b302af3204e0e5537af99c1577b09b0877
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/339152
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14855
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
The code needs to be able to set drive strength for the pins used for
SDMMC0 interface. This patch adds the definitions for the two
registers, as per page 378 of the RK3399 TRM Part 1.
Instead of calculation of the reserved range size just use known
offsets of the registers included in the structure.
BRANCH=none
BUG=chrome-os-partner:53257
TEST=with the upcoming driver change it is possible to boot chrome OS
on Gru from various micro SD cards which were failing before.
Change-Id: I63bf37432ec7f3bdf7e9c6a79d51c31de122dae9
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: c6d6dc5e5e6cc81c173603d4eb21ae803a47815d
Original-Change-Id: Ibe7584e77b446435ab1264dcf8fc8bfe0c50438e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/344490
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14852
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
improve rk3399 sdram drvier, so we can support DDR3,
and check the cs training result, so we make sdram
work more stable.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot from kevin, do memtester in kernel and pass
Change-Id: I508bf26fb8163bab2d725a91ead929df585e04a7
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 4d83a87c459167145b7260f9af5c0380caddc056
Original-Change-Id: Id385f1343804a829b6589f89f4cfbb6565d41417
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/342664
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14849
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
This patch configures clock for tsadc and then
makes it in automatic mode to generate TSHUT when
CPU temperature is higer than 120 degree Celsius.
BRANCH=none
BUG=chrome-os-partner:52382,chrome-os-partner:51537
TEST=Set a lower tshut threshold(45C), run coreboot and check
that coreboot reboot again and again.
Change-Id: I0b070a059d2941f12d31fc3002e78ea083e70b13
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 05107bd6a3430e31db216c247ff0213e12373390
Original-Change-Id: Iffe54d3b09080d0f1ff31e8b3020d69510f07c95
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342797
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/14848
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
The tsadc of rk3288 and rk3399 are similar but not enough
to share the same common driver, and we also decide to add a
polarity setting for mainboards on rk3399 tsadc header.
So we'd better split the tsadc header for each SoC.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=build veyron_jerry
Change-Id: I41f08965e6d7ce16da1754d4d2512c826cf8aff5
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: b36ee54c4146623bcacd83fe7d55a4fc78bae792
Original-Change-Id: I629599f9e30d863cabf764e1372c38f0f39d5480
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342796
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14847
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Let vop aclk sources from CPLL, and vop dclk from NPLL.
The dclk freq is decided by the edid mode pixel_clock which
may require high accuracy like 252750KHz. The pll_para_config()
can calculate the dividers for PLL to output desired clock.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=check display with the other patches
Change-Id: I12cf27d3d1177a8b1c4cfbd7c0be10204e3d3142
Signed-off-by: Martin Roth <martinroth@google.com>
Original-Commit-Id: 0f019b055fffebe9ea3928aae1e25b0ad4feef81
Original-Change-Id: Icef58f87041905961772b69c6b8170d5a866a531
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342335
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: https://review.coreboot.org/14846
Tested-by: build bot (Jenkins)
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
|
|
Allow the platform to override the input clock for the UART by
implementing the routine uart_platform_refclk and setting the Kconfig
value UART_OVERRIDE_REFCLK. Provide a default uart_platform_refclk
routine which is disabled when UART_OVERRIDE_REFCLK is selected. This
works around ROMCC not supporting weak routines.
Testing on Galileo:
* Edit the src/mainboard/intel/galileo/Makefile.inc file:
* Add "select ADD_FSP_PDAT_FILE"
* Add "select ADD_FSP_RAW_BIN"
* Add "select ADD_RMU_FILE"
* Place the FSP.bin file in the location specified by CONFIG_FSP_FILE
* Place the pdat.bin files in the location specified by
CONFIG_FSP_PDAT_FILE
* Place the rmu.bin file in the location specified by CONFIG_RMU_FILE
* Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate
UEFIPAYLOAD.fd
* Testing is successful when CorebootPayloadPkg is able to properly
initialize the serial port without using built-in values.
Change-Id: If4afc45a828e5ba935fecb6d95b239625e912d14
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14612
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
We need ensure the bl31 base is greater than 4KB since there's
the shared mem for coreboot.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot to kernel with atf patch
Change-Id: I44cf436b3072f03b93da4a19227dcc540d7513db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a462f604c284c84bd8c5a0420e75eeae5035b382
Original-Change-Id: I55ec134762bb6bcbc91937ad5763617d7488490b
Original-Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/342334
Original-Commit-Ready: Vadim Bendebury <vbendeb@google.com>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: https://review.coreboot.org/14741
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The rk3288 and rk3399 can use a common driver even that
there are some different registers.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot from veyron_jerry and check display
Change-Id: I510f68ba00308e47608d6e9921154a5c66ad8858
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1d857a7aa68d831a5007210255b121fed7a9e8de
Original-Change-Id: I063e3eebc836debc01c450d8ab9f1524c9a47c56
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/341633
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14731
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Another day, another overflowing RK3288 stage. There's almost 2K of
space left in verstage/romstage (*gasp*, such waste!), so let's move one
of them over to the bootblock. (We now have no whole kilobyte left that
I can see...)
BRANCH=None
BUG=chromium:608439
TEST=Built Jerry
Change-Id: Ice51d73ec0d89bcb1c927046be95630f177469c5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fb7a101daba4f4f899a9c907b29d908661aa2dae
Original-Change-Id: Ib72c0b3718aac38bc97c898a74aa5757e46cef0b
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/341742
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/14730
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The idea is that they stay low unless we know that we booted from SPI
flash. As this code runs in SPI flash - it is ok to turn these rails
on as soon as possible, and pp3000 rail it is essential for UART to
work.
Kevin rev1 and Gru designs are going to be using these pins to
control these rails. Kevin rev1 had those GPIO pins routed to two
chip enable signals, it is save to assert them high.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=kevin rev0 still boots (which does not prove much)
TEST=run coreboot on kevin rev1 to kernel
Change-Id: I5f3eb4cf5d6f04a0253574dd8b5c039eab0bae1a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 987042246672e9391087dbd5060785a379dde131
Original-Change-Id: I31bb03334ad9e3aa57db726fb43dec85014a3f05
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/341543
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-on: https://review.coreboot.org/14729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Previous code had several problems:
* It was only initting 3 of the 4 voltage rails hooked up to PWM
regulators.
* It was using a PWM frequency that was out of range. Apparently from
testing 300kHz is best.
* It was initting all rails to .9V. On my Kevin I needed 1.1V to make
booting all 6 cores / rebooting reliable.
With this fix both booting all 6 cores in the kernel is reliable (if we
tell the kernel not to touch the PWM) and the "reboot" command from
Linux userspace is also reliable (previously it crashed in coreboot).
NOTES:
* Setting all rails to the same voltage doesn't make a lot of sense. We
should figure out what these should _actually_ be. Presumably the
little CPU rail can be lower, at least. ...and we don't use the GPU
in the BIOS so we should set that lower.
BRANCH=none
BUG=chrome-os-partner:51922
TEST=reboot test
Change-Id: I44f6394e43d291cccf3795ad73ee5b21bd949766
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ac79a7cfb079d23c9d7c4899fdf18c87d05ed0e
Original-Change-Id: I80996adefd8542d53ecce59e5233c553700b309f
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/339151
Reviewed-on: https://review.coreboot.org/14727
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
rk3288 and rk3399 use same edp IP, move soc specific setting to
soc/display, and move edp driver to common, so rk3399 can reuse
this driver.
BUG=chrome-os-partner:52460
BRANCH=none
TEST= test on jerry and mighty, edp panel can work
Change-Id: Ie3f3e8468b2323994af8a002413bf93b3edc8026
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 64bb4b2c7ed373d9730c9aa0b0896a32164fc7ee
Original-Change-Id: Ie5c15a81849a02d1c0457e36ed00fbe2d47961fb
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/340504
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14725
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If SPI_BASEx is defined (for 2 < x <= 5), allow selecting it.
Since the bus number translates into an offset into an array, require
that all earlier buses are defined, too.
Also assert() that the array is properly sized instead of blindly
exceeding its bounds when called with a too big bus number.
TEST=initializing bus 5 doesn't trap anymore on kevin
BRANCH=none
BUG=none
Change-Id: I69f8ebe10854976608197a13d223ee8a555a9545
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c4af2a4ad4d6eea551653ca300ea6d04f1280919
Original-Change-Id: I27724d64d822ed0ec824a69ed611140bfbe08f5a
Original-Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Reviewed-on: https://chromium-review.googlesource.com/341034
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14723
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch add functions to configure saradc clk and get
saradc's raw value for each channel.
Currently add saradc to ramstage.
Please refer to TRM V0.3 Part 2 Chapter 18 for this IP.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=on kevin board, get the raw value 61 for channel 0,
measure the ADC_IN0 as 0.109V,
61.0/1024 = 0.05957 0.109V/1.8V = 0.06056
Change-Id: Ic198b2a964ccf8bb687441f0e2702665402fff6e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bc400316de2d75eccad3990a4187bf2dc49a844a
Original-Change-Id: I542430ed97bd27f9bfcec89b1d703d9fa390d4e0
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/334177
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14720
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=chrome-os-partner:51537
TEST=kernel is not stuck anymore and can boot into prompt,
(testing with others patches)
Change-Id: I74bdfa0ce608044a554bb3b06ed17b7157260294
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca4e7a50c989ae0eff270df4fa160b80a172af31
Original-Change-Id: Id95d5f282ba49981f8e33da029e8710cd4087945
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332561
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14719
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The base address of MMIO space is different for different Rockchip
SOCs. Define them in the appropriate address map files and use the
definition in common code.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=emerge-kevin coreboot
Change-Id: I615f3cadd6d5d994b7dd1defbd10d02ad5c994da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24f941e960e4a2cfb9fc26415f56e240de3d00d9
Original-Change-Id: Ia48d75e7de546b17636cde7829ee09837b9d7ac9
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/337190
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14717
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the sdram driver for rk3399. With this patch we can boot
into depthcharge.
This patch also include a config file for lpddr3-hynix-4GB
that generated bases on its datasheet.
Please refer to TRM V0.3 Part1 Chapter 9 for DMC.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=boot to depthcharge on kevin
Change-Id: I2afcaa3b68dbad77a5fe677b835289b675ed2bef
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5d777e29942057fb7237eefa34051d1f54b19405
Original-Change-Id: Ifa1fe98a7058869518757d50678a64620610d91d
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/332562
Reviewed-on: https://review.coreboot.org/14716
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
set sdram, sram and all device to non-secure status,
so we can free to do mmu operation in coreboot. bl31
will care about secure control.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=emerge-kevin coreboot
Change-Id: I11e02246550630c6dfe4e0cbad01e8cd5b83ef1e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae2df532856110c4d87eb162fd3687f8de27c77f
Original-Change-Id: Ia026cf685a9d7bdf7b0c7181b1b325c54bc4554f
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/338947
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14715
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Reuse the rockchip common pwm driver.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=emerge-kevin coreboot
Change-Id: I1a1ab237f891f06affb74817b5cae1a034a9760e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37afce0f94435ffef8bdd74b4251430f11ec22f4
Original-Change-Id: Ia94985f56e424d049fdcc5be86c696577d52a07c
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/333255
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14714
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Reuse the common gpio driver and implement some stubs
in gpio.h.
RK3288 has one pmu gpio while RK3399 have two.
Please refer to TRM V0.3 Part2 Chapter 11 for GPIO section.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=emerge-kevin coreboot
Change-Id: I041865ce269b0ae1f6a07e6c37d53d565a37c5ef
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d416ba0ce6a1ff2cf52f6b83ade601d93b40ffeb
Original-Change-Id: I1d213a91ea508997b876441250743671204d7c53
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332560
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14713
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The gpio of rockchip SoCs(rk3288 & rk3399) are the same IP,
moving the gpio code of rk3288 to common then can be reused on rk3399.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=build and boot into chromeos on veyron_jerry
Change-Id: I10a4b9d32afe60fd52512f2ad0007e9d2785033b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1c0c4b4b999790b0be7b0eeb70d2a7a86158f779
Original-Change-Id: If13b7760108831d81e8e8c950cdf61724d497b17
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/339846
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14712
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch add i2c clock driver and reuse the common
rockchip i2c driver.
The i2c0,4,8 src clock from ppll, while i2c1,2,3,5,6,7 from gpll.
Please refer to TRM V0.3 Part1 Page 142 for i2c clock setting.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=emerge-kevin coreboot
Change-Id: I91822e483244d71798a1c68f14ba0a84f405a665
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 270118e44d159f6a27812fa234b34fe7ac54cbe4
Original-Change-Id: Iea5f4a93cf173e1278166dcb04e19a4ef6c4af04
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/338948
Reviewed-on: https://review.coreboot.org/14711
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch implements spi clock driver and initialize
SPI flash rom for the baseboard gru.
There are 6 on-chip SPI controllers inside RK3399. For
SPI3, it's source clk from ppll, while the others from gpll.
Please refer to CRU session of TRM for detail.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=emerge-kevin coreboot
Change-Id: I597ae2cc8ba1bfaefdfbf6116027d009daa8e049
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4c6a9b0aedd427727ed4f4a821c5c54fb3a174b9
Original-Change-Id: I68ad859bf4fc5dacaaee5a2cd33418c729cf39b8
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/338946
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14710
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch initialize MMU and config mmu ranges for rk3399.
During the bootblock phase, mark the max dram size supported(4GiB)
as device memory because the mmio space start at 0xF8000000, and
_sram as secure memory.
After ddr setup in romstage, remark whole dram as cached memory
except the _dma_coherent range.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=emerge-kevin coreboot
Change-Id: I0cd4abb8c30b73d87d8ba6f964edd42bdf4813fb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fc22ab0c16d8107c217db1629286d5ff1c4bc5b3
Original-Change-Id: I66bfde396036d7a66b29517937a28f0767635066
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332387
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14708
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch list four frequencies for ddr controller,
200MHz, 300MHz, 666MHz and 800MHz and configure
each freq by setting the DPLL dividers.
By default, the clk_ddrc is from DPLL and equals to DPLL,
so here we only need to set the DPLL clock.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=emerge-kevin coreboot
Change-Id: Ifabe85b5dc95e3c8e3e9cbf946e12e8b06b881cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 18ec4f7d8738472fbadd60fa3c8f810f5347ffa2
Original-Change-Id: I448057542c3885068ddffa5b37d0341ee3ec04b1
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/340184
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14707
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch initialize the PLL clocks and add function to
configure cpu freq. Right now, we set the little cpu freq to 600MHz.
In coreboot, we currently care about these four PLLs,
o. APLL for cpu clk, where A stands for AXI,
o. CPLL and GPLL are the generic PLL mainly for peripheral clk,
o. PPLL is only PMU clk.
For the peripheral clocks, there are thress clocks named as,
aclk_perihp,
aclk_perilp0,
hclk_perilp1,
where the 'h' and 'l' letters refer to High and Low speed.
As the diagram below, the aclk_perihp always be the parent of
more higher speed peripheral devices like pcie, and
hclk_perilp1 for spi, i2c, aclk_perilp0 for crypto.
These three clocks can choose parent from GPLL or CPLL freely,
in this patch, they are all sourced from GPLL.
GPLL(594M)/CPLL(384M) APLL(600M for little core)
| |
`-- aclk_perihp `-- clk_core(600M == APLL)
| | |
| `-- periph_aclk(148.5M) `-- atclk_core(300M)
| `-- periph_hclk(148.5M) `-- aclkm_core(300M)
| `-- periph_pclk(37.125M) `-- pclk_dbg_core(100M)
|
`-- hclk_perilp1
| |
| `-- periph_hclk(99M) PPLL(594M)
| `-- periph_pclk(49.5M) |
| `-- pmu_pclk(99M)
`-- aclk_perilp0
|
`-- periph_aclk(99M)
`-- periph_hclk(99M)
`-- periph_pclk(49.5M)
BRANCH=none
BUG=chrome-os-partner:51537
TEST=emerge-kevin coreboot
Change-Id: I1c46ff17e6b466529244afb41d7fd4abbcfd3da4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9f0d31177336a3450577950426f9cc9d56e2254c
Original-Change-Id: I4ad00df3e406bd0a7576287d6e62b8993a8c2d02
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332386
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14706
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Quoting an earlier review comment, using static structures pointers in
the include file "should allow the compiler to optimize accesses
better than defining it in a separate compilation unit (by being able
to constant fold stuff like &rk3399_pmusgrf->field into a single
address, rather than loading the symbol, loading an offset constant
and adding)".
Any decent compiler linker system nowadays would consolidate this
definition in any case.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=with the rest of the patches applied Kevin successfully boots
Linux kernel.
Change-Id: Ibb576c7691a30f2f429651fcca133bd72710c13b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 89b6f22e37f733667156f15afb8c27d8a9f07512
Original-Change-Id: Ice8d6d766a91e7f4fce553378a23b9ca593d12dd
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/339869
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14705
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The GRF(general register file) of rk3399 is divided into two sections,
o. GRF, used for general non-secure system
o. PMUGRF, used for always-on syosyem
This patch defines the registers used for iomux/gpio/system control.
BRANCH=none
BUG=none
TEST=emerge-kevin coreboot
Change-Id: I3239793523e0f55f6661ef029c3dac9970990fb8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 897d01573ea2bbe2b3091358ec3c9728ee82f8ec
Original-Change-Id: I4c228ddb60c9c4056de50312dc269227fac9a7fa
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332388
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14704
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is only to make building happy, the real sdram driver
comes later.
BRANCH=none
BUG=none
TEST=emerge-kevin coreboot
Change-Id: I4123c3a6627d7264c615fefbb89e16c4dfb9a423
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5b992a7895a72c83f57228d3abd1ae37d55e7e7b
Original-Change-Id: Ie340877e828ae760169ccfa9a7099e7472d2fc26
Original-Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/338944
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14703
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The standard uart8250mem_32 driver is now usable on ARM, so use it.
BUG=none
BRANCH=none
TEST=see that serial firmware builds still log on serial in all stages
on veyron_minnie. Also verified that a 9600 baud console is functional.
Change-Id: I653b70a0d51a8d136e1da17537988f5b33c7a160
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fa27c60fd38002775072d11fca431d4788b4d1d7
Original-Change-Id: I047d74ac2d5c311f303955e62391114e16ec087a
Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/337551
Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org>
Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/14319
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To avoid diverging too much on an actively developed code base, keep
the changes to a separate commit that can be downstreamed more easily:
- removed unused includes
- gave kevin board a "Kevin" part number
- marked RW_LEGACY as CBFS region (to follow up upstream changes)
- moved romstage entry point to SoC code (instead of encouraging
per-board copy pasta)
Change-Id: Ief0c8db3c4af96fe2be2e2397d8874ad06fb6f1f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14362
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Update all of the license headers to make sure they are compliant
with coreboot's license header policy.
Change-Id: Iea1a4b8f7df08d2ae694401211b0b664f5980b02
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14327
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The driver interface function derives the driver specific pointer from
the API provided handle, no need to use the handle in the local
functions.
BRANCH=none
BUG=none
TEST=SPI interface with the flash ROM is still working properly.
Change-Id: I7725b658365473c733698ca050e780d1dd5072d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a2b42779785623bd1234ab2dfb0b4db76c890fc7
Original-Change-Id: I9d657dc23540e9eac52d2dbfc551ed32b7fa98f0
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/338090
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14318
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
3288 and 3399 use the same pwm controller.
With this patch in place it is easy to add support for 3399.
BRANCH=none
BUG=none
TEST=booted veyron_jerry to kernel login prompt
Change-Id: If8f5697b4003d078b46de3fa3cebad6c8310a688
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: acf6132619167743c0c991b75f0f49c8d0e51ca7
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Change-Id: I79428f9ec71017ad8f3ad67dac1468178ccc3a1e
Original-Reviewed-on: https://chromium-review.googlesource.com/338019
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14336
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Both SOCs use the same base i2c controller, the difference mostly
being the number of interfaces and distribution of the interfaces'
registers between register files.
Upload check was complaining about misspelled labels, fixed them to
pacify the check.
With this patch in place it is easy to add support for 3399.
BUG=none
BRANCH=none
TEST=brought up veyron_mickey all the way to booting the kernel. It
properly recognized the TPM and the edid of the panel, proving
that i2c interface is operational.
Change-Id: I656640feabd0fc01d2c3b98bc5bd1e5f76f063f6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 82832dfd4948ce9a5034ea8ec0463ab82f0f5754
Original-Change-Id: I4829ea53e5f4cb055793d9a7c9957d6438138956
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/337971
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14335
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Most things still need to be filled in, but this will allow
us to build boards which use this SOC.
BRANCH=none
BUG=chrome-os-partner:51537
TEST=with the rest of the patches applied Kevin board can be booted to
Linux login propmt.
Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 27dfc39efe95025be2271e2e00e9df93b7907840
Original-Change-Id: I6f2407ff578dcd3d0daed86dd03d8f5f4edcac53
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/332385
Reviewed-on: https://review.coreboot.org/13915
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Upcoming designs are based on similar SOCs, this patch moves code
which can be reused into a common directory under soc/rockchip.
Changing spi.h to include stdder.h, as this is were check_member() is
defined, this becomes necessary later when the new SOC code is added.
Renaming UART driver private functions not to be bound to any
particular SOC.
BUG=none
BRANCH=none
TEST=the refactored code works fine on the new platform (with the rest
of the patches applied).
Change-Id: I39a505aecda8849daa58a8eca0e44a5243664423
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f63f2582042ac115481207ddf329ea2e3260e55e
Original-Change-Id: I3a1139305354d460492b25a45f3da315a9a0b49e
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/335408
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14235
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Our EDID code had always been aligning the framebuffer's
bytes_per_line (and x_resolution dependent on that) to 64. It turns out
that this is a controller-dependent parameter that seems to only really
be necessary for Intel chipsets, and commit 6911219cc (edid: Add helper
function to calculate bits-per-pixel dependent values) probably actually
broke this for some other controllers by applying the alignment too
widely.
This patch makes it explicitly configurable and depends the default on
ARCH_X86 (which seems to be the simplest and least intrusive way to make
it fit most cases for now... boards where this doesn't apply can still
override it manually by calling edid_set_framebuffer_bits_per_pixel()
again).
Change-Id: I1c565a72826fc5ddfbb1ae4a5db5e9063b761455
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14267
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Coreboot and most payloads support three basic pixel widths for the
framebuffer. It assumes 32 by default, but several chipsets need to
override that value with whatever else they're supporting. Our struct
edid contains multiple convenience values that are directly derived from
this (and other properties), so changing the bits per pixel always
requires recalculating all those dependents in the chipset code. This
patch provides a small convenience wrapper that can be used to
consistently update the whole struct edid with a new pixel width
instead, so we no longer need to duplicate those calculations
everywhere.
BUG=None
TEST=Booted Oak in all three pixel widths (which it conveniently all
supports), confirmed that images looked good.
Change-Id: I5376dd4e28cf107ac2fba1dc418f5e1c5a2e2de6
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14158
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
make_idb.py only support RK3288 before, add chip parameter, so we can
support RK3399 either.
Change-Id: I6811acb7f0cdaf1930af9942a70db54765d544d5
Signed-off-by: huang lin <hl@rock-chips.com>
Reviewed-on: https://review.coreboot.org/13913
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch generalizes the approach previously used for ARM32
TTB_SUBTABLES to "auto-detect" whether a certain region was defined in
memlayout.ld. This allows us to get rid of the explicit Kconfig for the
TIMESTAMP region, reducing configuration redundancy and avoiding
confusion when setting up future boards.
(Removing armv4/bootblock_simple.c because it references this Kconfig
and it is a dead file that I just forgot to remove in CL:12076.)
BRANCH=None
BUG=None
TEST=Booted Oak and confirmed that all pre-RAM timestamps are still
there. Built Nyan and Falco.
Change-Id: I557a4b263018511d17baa4177963130a97ea310a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13652
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I084eb4694a2aa8f66afc1f3148480608ac3ff02b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/13635
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
On one particular TV the TV was holding SDA low when it came up. It
would release the SDA when the SCL went low the first time.
Unfortunately the HDMI i2c port wouldn't transmit until the SDA was
released.
Let's detect this case and insert a bogus clock pulse to try to get the
other side to release SDA.
It's unclear why the kernel doesn't have this problem.
BRANCH=none
BUG=chrome-os-partner:46256
TEST=Insignia TV works now
Change-Id: Ic9d27eb69bdc9c5fb11a68258e0c755cdc8b79d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 356ee7503f04e741a41be37ad573b588067b7114
Original-Change-Id: I4b6361877e0576cc4ea2f643f073f1aab660e434
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309258
Original-Reviewed-by: Agnes Cheng <agnescheng@google.com>
Original-Commit-Queue: Agnes Cheng <agnescheng@google.com>
Original-Trybot-Ready: Agnes Cheng <agnescheng@google.com>
Original-Tested-by: Agnes Cheng <agnescheng@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309546
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12451
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
When we first added ARM support to coreboot, it was clear that the
bootblock would need to do vastly different tasks than on x86, so we
moved its main logic under arch/. Now that we have several more
architectures, it turns out (as with so many things lately) that x86 is
really the odd one out, and all the others are trying to do pretty much
the same thing. This has already caused maintenance issues as the ARM32
bootblock developed and less-mature architectures were left behind with
old cruft.
This patch tries to address that problem by centralizing that logic
under lib/ for use by all architectures/SoCs that don't explicitly
opt-out (with the slightly adapted existing BOOTBLOCK_CUSTOM option).
This works great out of the box for ARM32 and ARM64. It could probably
be easily applied to MIPS and RISCV as well, but I don't have any of
those boards to test so I'll mark them as BOOTBLOCK_CUSTOM for now and
leave that for later cleanup.
BRANCH=None
BUG=None
TEST=Built Jerry and Falco, booted Oak.
Change-Id: Ibbf727ad93651e388aef20e76f03f5567f9860cb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/12076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
'edid->hdmi_monitor_detected' would indicate whether the monitor
interface is HDMI or DVI.
BRANCH=none
BUG=chrome-os-partner:43789
TEST=Previously, my LG monitor couldn't show dev screen. But now I can see
dev screen have been posted normally.
Change-Id: Id71f051b2cd792712e52bee7a763db383c1962a8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 88101589a22d06f0bc25e0750b2862cf66b55391
Original-Change-Id: I157861d327926b834e1e8606b0b676f413491c70
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/309056
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12346
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It encourages users from writing to the FSF without giving an address.
Linux also prefers to drop that and their checkpatch.pl (that we
imported) looks out for that.
This is the result of util/scripts/no-fsf-addresses.sh with no further
editing.
Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11888
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Previously if we tried to read the HDMI EDID several times and failed
each time then we're return from hdmi_read_edid() with no error. Then
we'd interpret whatever happened to be in memory at the time as an
EDID--not so great.
Let's actually look at the error.
BRANCH=none
BUG=chrome-os-partner:46256
TEST=Monitor that can't read EDID not shows that in the log
Change-Id: I6e64b13ae3f8c61bf1baaa1cfc8b24987bd75cf3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 44bda7311f9ee677235e4dc8db669226518b3895
Original-Change-Id: I9089755b75118499bec37bdb96d1635f66252e65
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/309298
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It's no longer used.
BUG=none
BRANCH=none
TEST=it compiles
Change-Id: I3d9385e0e1f14977c1632f3a8dda771c684ce458
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5381b6434996da10706dd358928f98703ac0892c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Ib0cfaf1bb173a7150f7ff504b9f58a62eb82e781
Original-Reviewed-on: https://chromium-review.googlesource.com/302634
Reviewed-on: http://review.coreboot.org/12138
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
BUG=chrome-os-partner:42054
BRANCH=none
TEST=tested with subsequent patch
Change-Id: I92d67ff4b706c16677661ead1edd5c190ccc6d95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dced0fcbc35457d7326d590948ce5fe098a5e735
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I7b29c647380046ac41a290b19fdfba186bcb2127
Original-Reviewed-on: https://chromium-review.googlesource.com/302632
Reviewed-on: http://review.coreboot.org/12136
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
BUG=chrome-os-partner:41201
BRANCH=firmware-veyron
TEST=tested with subsequent patch on mickey
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I7081d92be128f522e1a33eee6f3de9dfbbf042ea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a390c927ad8ed035520c8a813db808715dc5e527
Original-Change-Id: I3ce0f7b2772c8c652b7f461749d01cc7b669b6cf
Original-Reviewed-on: https://chromium-review.googlesource.com/300616
Original-Commit-Ready: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/12134
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Currently coreboot expects the loader to clear the bss section
for all stages. i.e. stages don't clear their own bss. On ARM
SoCs the BootROM would be responsible for this. To do that
one needs to include the bss section data (all zeros) in the
bootblock.bin file. This was previously being attempted by
keeping the .bss info in the .data section because objcopy
happened zero out non-file allocated data section data.
Instead go back to linking bootblock with the bss section
but mark the bss section as loadable allocatable data. That
way it will be included in the binary properly when objcopy
-O binary is emplyed. Also do the same for the data section
in the case of no non-zero object values are in the data
section.
Without this change the trick of including .bss in .data
was not working when there wasn't a non-zero value object
in the data section.
BUG=None
BRANCH=None
TEST=Built emulation/qemu-armv7 and noted bootblock.bin contains
the cleared bss.
Change-Id: I94bd404c2c4a8b9332393e6224e98940a9cad4a2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11680
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
There's no reason to have a separate verstage.ld now
that there is a unified stage linking strategy. Moreover
verstage support is throughout the code base as it is
so bring in those link script macros into the common
memlayout.h as that removes one more specific thing a
board/chipset needs to do in order to turn on verstage.
BUG=chrome-os-partner:44827
BRANCH=None
TEST=None
Change-Id: I1195e06e06c1f81a758f68a026167689c19589dd
Signed-off-by: Aaron Durbin <adubin@chromium.org>
Reviewed-on: http://review.coreboot.org/11516
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This changes the API to rkclk_configure_cpu() such that we can pass
in the desired APLL frequency in each veyron board's bootblock.c.
Devices with a constrainted form facter (rialto and possibly mickey)
will use this to run firmware at a slower speed to mitigate risk
of thermal issues (due to the RK808, not the RK3288).
BUG=chrome-os-partner:42054
BRANCH=none
TEST=amstan says rialto is noticably cooler (and slower)
Change-Id: I28b332e1d484bd009599944cd9f5cf633ea468dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d10af5e18b4131a00f202272e405bd22eab4caeb
Original-Change-Id: I960cb6ff512c058e72032aa2cbadedde97510631
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297190
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11582
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some of the Chrome OS boards were directly calling vboot
called in some form after contorting around #ifdef preprocessor
macros. The reasoning is that Chrome OS doesn't always do display
initialization during startup. It's runtime dependent. While
this is a requirement that doesn't mean vboot functions should be
sprinkled around in the mainboard and chipset code. Instead provide
one function, display_init_required(), that provides the policy
for determining display initialization action. For Chrome OS
devices this function honors vboot_skip_display_init() and all
other configurations default to initializing display.
Change-Id: I403213e22c0e621e148773597a550addfbaf3f7e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11490
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Due to HDMI need to set dclk_rate to 27Mhz, and we can't
caclu a suitable config paramters for this rate, so we
need to multiple rate unless the vco larger then VCO_MAX.
When NPLL rate multiple to 54MHz, pll_para_config could
caclu a right paramters, and I have verify the clock jitter
is okay to HDMI output.
Jitter Reports:
Dclk Rate NPLL Rate nr/no/nf jitter Margin
27MHz 54MHz 2/10/45 449.0ps +51.0%
BRANCH=None
BUG=chrome-os-partner:42946
TEST=Mickey board, show right recovery picture on TV,
and 480p clock jitter test passed
Change-Id: Iaa0a6622e63d88918ed465900e630bdf16fde706
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 59f1552026889f61167cfeaec3def668ba709c10
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Change-Id: Iab274b41f163d2d61332df13e5091f0b605cb65c
Original-Reviewed-on: https://chromium-review.googlesource.com/288416
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290331
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11393
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If an HDMI display is detected (EDID can be read), set the
display mode to 480p. If for some reason 480p is not supported
then we'll fall back to the automatically detected display mode.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=dev mode screen shows up on Mickey at 480p resolution
Change-Id: I2c431eff6673392d3c09e1b66c66ba12ecc6eeb0
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 76203a683c4501f368c50fe24101f68746ddb7f0
Original-Change-Id: I90dea37daa2d78628230d7d47f7ef0e917cbd7bb
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/290554
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11392
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Assume that HDMI implies usage of an external display, and that we
want to try bringing up display if we can read an EDID.
BUG=chrome-os-partner:42946
BRANCH=firmware-veyron
TEST=none; need a display with corrupt EDID to test with
Change-Id: I11cc61140d905d70798a7b46db7847f3a1b3c886
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: ace7773623eac57f068ecd50baa9108ce028cf1b
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I9e22984a98b1a5f8cd9645b92dc9b87e8d968f01
Original-Reviewed-on: https://chromium-review.googlesource.com/293548
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11391
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This replaces various timing mode parameters parameters with
an edid_mode struct within the edid struct.
BUG=none
BRANCH=firmware-veyron
TEST=built and booted on Mickey, saw display come up, also
compiled for link,falco,peppy,rambi,nyan_big,rush,smaug
[pg: extended to also cover peach_pit, daisy and lenovo/t530]
Change-Id: Icd0d67bfd3c422be087976261806b9525b2b9c7e
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: abcbf25c81b25fadf71cae106e01b3e36391f5e9
Original-Change-Id: I1bfba5b06a708d042286db56b37f67302f61fff6
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/289964
Original-Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11388
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Struct edid defien pvsync & phsync as an character,
like '+' or '-', so we need to check sync polarity
by comparing with characters '+' and '-' instead of
treating as boolean.
BRANCH=None
BUG=chrome-os-partner:42946
TEST=Mickey board, light monitor normally
Change-Id: I92d233e19b6df8917fb8ff9a327ccb842c152d65
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Original-Commit-Id: 2d22d4b6e7108474f67200e0fb1e4894cd88db85
Original-Change-Id: I14c72aa8994227092a1059d2b25c1dd2249b9db1
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/289963
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/11380
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add CHROMEOS dependencies to selects for the following Kconfig
symbols:
CHROMEOS_RAMOOPS_DYNAMIC
CHROMEOS_RAMOOPS_NON_ACPI
CHROMEOS_VBNV_CMOS
CHROMEOS_VBNV_EC
CHROMEOS_VBNV_FLASH
EC_SOFTWARE_SYNC
LID_SWITCH
RETURN_FROM_VERSTAGE
SEPARATE_VERSTAGE
VBOOT_DISABLE_DEV_ON_RECOVERY
VBOOT_EC_SLOW_UPDATE
VBOOT_OPROM_MATTERS
VBOOT_STARTS_IN_BOOTBLOCK
WIPEOUT_SUPPORTED
This gets rid of these sorts of Kconfig errors:
warning: BOARD_SPECIFIC_OPTIONS selects CHROMEOS_VBNV_EC which has
unmet direct dependencies (MAINBOARD_HAS_CHROMEOS && CHROMEOS)
Note: These two boards would never actually have CHROMEOS enabled:
intel/emeraldlake2 has MAINBOARD_HAS_CHROMEOS commented out
google/peach_pit doesn't have MAINBOARD_HAS_CHROMEOS
Change-Id: I51b4ee326f082c6a656a813ee5772e9c34f5c343
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: http://review.coreboot.org/11272
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I54650671adaef3bc129c662d6e972474c869afaa
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10859
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully for veyron_pinky
Original-Change-Id: I3862e9bf2c32085c921adae4c1dcdf88ff0f3ff3
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/227243
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 0fabdbb05826160beb8ee8f89339b18a49e87ab8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4504d29a43084d4bd406626899b25903200fa6d7
Reviewed-on: http://review.coreboot.org/10740
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Now that we have functioning display code for all platforms,
we can just get rid of this ugly hack used on non-Chromebook
veyrons.
BUG=none
BRANCH=none
TEST=built for Brain, Rialto, Mickey, Romy
Change-Id: Ibe248c7cc74940811345c249d66992d74fe85fe5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9c627b087ba9fc07b4ec4a6d55d2e0203bdd4ff5
Original-Change-Id: I946eddb4e8ce1dbaa20212a2bb417e71a31b2ba3
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282049
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10785
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
BUG=none
BRANCH=none
TEST=built w/ follow-up rialto patch
Change-Id: I166c75673c199e8c6860f601db6759cdc3cb9c96
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ba0e0b639f12654ec54216d4366c688baa5b3253
Original-Change-Id: Id21c87ace2f4d381a1e374e1d5fe15cf1cd96da0
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282047
Reviewed-on: http://review.coreboot.org/10779
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We currently select either HDMI or EDP (default). This patch
allows us to use HDMI as a fallback for devices that may have
a display connected on either interface. It also renames the
enums to sound a little more sensible in other contexts (more
on that in the follow-up patches).
VOP_MODE_AUTO is added to the mode enum which will make it explicit
that a board can support either. In AUTO_MODE we will try EDP first
and then fallback to HDMI. Other modes can be set to force a certain
behavior such as HDMI-only on Mickey where it doesn't make sense to
try EDP.
A follow-up patch will add logic for when we explicitly don't want
to probe for any display (headless devices).
BUG=none
BRANCH=none
TEST=On veyron_danger, connected EDP and HDMI displays and saw dev
mode screen appear on EDP display. Unplugged EDP and then dev mode
screen showed up on HDMI.
Change-Id: I22b38031c4ab3d79fbb182f7a906da1197f35543
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3f57ed3758c4e516d9fd226ad9499b102b81b423
Original-Change-Id: I352dcde16f7f3ebbf5796852b685685e541eb794
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/281076
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10775
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CRU request (24MHz * nf) / nr > 440MHz, but now ddr 300MHz
setting can't meet this request, so modify it
BRANCH=None
BUG=None
TEST=Set ddr frequency to 300MHz and boot from mickey
Change-Id: I00324f5864f5ce8c1a3768268e402e0beca214c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3d292b67245e714cb03ed35ee28c9b838d514da5
Original-Change-Id: I885704542293ed55e429a0b4b30135af7978990f
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282445
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10772
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some basic MMU setup is required to allow unaligned memory accesses that
happen across our entire codebase.
Change-Id: If5a84e19a7a3e47d6009fd073b1323dfb25e6a06
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10753
Tested-by: build bot (Jenkins)
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Where vboot verification can start, and how the code flow looks like is more a
property of the SoC (and its properties, like amount of SRAM) rather than the
board.
Change-Id: I610153ea4ceddc226d8cc3e17a515e41fc0479cf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10662
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
this is an brief hdmi driver which config with simple
display parameter, const encoder input & output color
format and 8bit color depth, and only 48KHz audio support.
what's more to prevent TV have not show an right things
before coreboot switch to kernel space, we have to add
an terrible 2s delay to driver (2s come from test many
times), cause we have to wait TV to respond (we got no
flag to check whether it is ready).
BUG=chrome-os-partner:40337
TEST=Booted Veyron Jerry and display normal
BRANCH=None
Change-Id: Icd33467e95de6219e1b614616f0112afc52097b6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7e5b699aff75a579116aae63d858c834b2f648e8
Original-Change-Id: Iedc87c011c5b62ce5f16a296dd9c3e0c2eaba59b
Original-Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/272565
Original-Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: http://review.coreboot.org/10625
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The HAVE_UART_MEMORY_MAPPED symbol is no longer present, so these
don't actually select anything.
Change-Id: I6d0eb610e48a4506ac7449ac677ee67981d0ff0d
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10608
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=none
BRANCH=none
TEST=Boot from mickey board
Change-Id: I6eadf52bddcf89011a112a8e5dee5e752556add9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e3c865f0bf8567c3183d7948a0f9e8361db70695
Original-Change-Id: I438527ee0870044f48b23a6842986e7cf166e191
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/276290
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/10477
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Used command line to remove empty lines at end of file:
find . -type f -exec sed -i -e :a -e '/^\n*$/{$d;N;};/\n$/ba' {} \;
Change-Id: I816ac9666b6dbb7c7e47843672f0d5cc499766a3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: http://review.coreboot.org/10446
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds a few bit counting functions that are commonly needed
for certain register calculations. We previously had a log2()
implementation already, but it was awkwardly split between some C code
that's only available in ramstage and an optimized x86-specific
implementation in pre-RAM that prevented other archs from pulling it
into earlier stages.
Using __builtin_clz() as the baseline allows GCC to inline optimized
assembly for most archs (including CLZ on ARM/ARM64 and BSR on x86), and
to perform constant-folding if possible. What was previously named log2f
on pre-RAM x86 is now ffs, since that's the standard name for that
operation and I honestly don't have the slightest idea how it could've
ever ended up being called log2f (which in POSIX is 'binary(2) LOGarithm
with Float result, whereas the Find First Set operation has no direct
correlation to logarithms that I know of). Make ffs result 0-based
instead of the POSIX standard's 1-based since that is consistent with
clz, log2 and the former log2f, and generally closer to what you want
for most applications (a value that can directly be used as a shift to
reach the found bit). Call it __ffs() instead of ffs() to avoid problems
when importing code, since that's what Linux uses for the 0-based
operation.
CQ-DEPEND=CL:273023
BRANCH=None
BUG=None
TEST=Built on Big, Falco, Jerry, Oak and Urara. Compared old and new
log2() and __ffs() results on Falco for a bunch of test values.
Change-Id: I599209b342059e17b3130621edb6b6bbeae26876
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3701a16ae944ecff9c54fa9a50d28015690fcb2f
Original-Change-Id: I60f7cf893792508188fa04d088401a8bca4b4af6
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/273008
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10394
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
CPU_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere
(with no overlap), and never read. Remove it.
Change-Id: I3f294b0724a87876a7e2f274e6933fe10321a69d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10253
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
The struct rockchip_spi_media type is no longer used;
nor is initialize_rockchip_spi_cbfs_media(). Remove them.
Change-Id: I2c24be249e0cd89e2dd328e05cdd24a178fe37e8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10214
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The build system includes a bunch of files into verstage that
also exist in romstage - generic drivers etc.
These create link time conflicts when trying to link both the
verstage copy and romstage copy together in a combined configuration,
so separate "stage" parts (that allow things to run) from "library" parts
(that contain the vboot specifics).
Change-Id: Ieed910fcd642693e5e89e55f3e6801887d94462f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10041
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change switches all SOC vendors and southbridges
to be autoincluded by Makefile.inc, rather than having to be
mentioned explicitly in soc/Makefile.inc or in
soc/<vendor>/Makefile.inc.
This means, vendor and SOC directories are now "drop
in", e.g. be placed in the coreboot directory hierarchy
without having to modify any higher level coreboot files.
The long term plan is to enable out of tree components to be
built with a given coreboot version (given that the API did not
change).
Change-Id: Iede26fe184b09c53cec23a545d04953701cbc41d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9799
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
RTC drivers now select RTC, so that code which depends on them
can implement fallback behavior for systems that lack the
hardware or driver.
Change-Id: I0f5a15d643b0c45c511f1151a98e071b4155fb5a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9953
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Upstream coreboot regularly runs Coverity over the code base. Turns out
that's a good idea since it's really easy to screw yourself over with a
missing parenthesis and some unfortunately deceptive line breaking.
This patch fixes a bug in LPDDR3 initialization due to an incorrect
operator precedence assumption ( ?: does not bind stronger than | ). In
effect, instead of setting MR11[1:0] to 0b11 or 0b00 based on ODT, we're
unconditionally setting MR0[1:0] to 0b11. Thankfully, MR0[1:0] seems to
contain read-only bits so this might have not been a problem when ODT is
off (which is currently true for all LPDDR boards).
Also adding a redundant LPDDR_OP() around the 0 to make the intent
clearer and changing 3 and 0 to 0x3 and 0x0 to make it more obvious that
these are bit masks (right?).
BRANCH=veyron
BUG=None
TEST=Running reboot loop on a Minnie, looks good so far...
Change-Id: I06464aaa57e693b1973846a5771162244f7a1c57
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan
Original-Commit-Id: 5bd9eba39fb7b0f940fead963bbc1878b031b2cb
Original-Change-Id: I701ce059472078b5de09a45dd31f54b65a51e641
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/264135
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Jinkun Hong <jinkun.hong@rock-chips.com>
Original-Tested-by: Jinkun Hong <jinkun.hong@rock-chips.com>
Reviewed-on: http://review.coreboot.org/9911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BOARD_ID functionality is not what requires the GPIO lib,
but it is the mainboard specific implementations that do.
The option essentially says whether the SoC provides
<soc/gpio.h> (with the interface required by the common
GPIO code). Right now, x86 and Samsung's Exynos SOCs
don't have support for this interface.
So this should be selected by the SOC, not by
BOARD_ID_SUPPORT.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
BUG=none
BRANCH=none
TEST=emerge-storm coreboot still successfully compiled an image
Change-Id: I0ce2bd7ce023f22791d31a6245833b61135504b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0dd4dea521372194eedf11b077d95fd3b15ad9f7
Original-Change-Id: I3dea6c2fb42a23fcb9d384c3bbfa7fc8e217be2d
Original-Reviewed-on: https://chromium-review.googlesource.com/262743
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9899
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The code to calculate the RK3288 SPI controller's internal clock divisor
is wrong: it assumes that the divisor register was an "n-1" divisor when
it actually isn't (due to some misleading kernel code that was copied in
here). This means that all SPI clocks are currently running lower than
expected.
This patch fixes the calculation and changes all callers such that the
effective speeds stay the same.
BRANCH=veyron
BUG=chrome-os-partner:38352
TEST=Booted Jerry with and without the patch, dumping the divisor for
flash and EC clocks. Made sure it stays the same.
Change-Id: I2336e2b81c2384b5076175fcf32717a3ab2ba0c5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1fd5b990f937019a9bee7bd693c91d6e2fca1adb
Original-Change-Id: I094d57a5933c8b849f5c66194e6cc2952ab68b90
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262269
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9887
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a manual cleanup of all the rubble left by coccinelle
waltzing through our code base. It's generally not very good with line
breaks and sometimes even eats comments, so this patch is my best
attempt at putting it all back together.
Also finally remove those hated writel()-style macros from the headers.
BRANCH=none
BUG=chromium:444723
TEST=None (depends on next patch)
Change-Id: Id572f69c420c35577701feb154faa5aaf79cd13e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 817402a80ab77083728b55aed74b3b4202ba7f1d
Original-Change-Id: I3b0dcd6fe09fc4e3b83ee491625d6dced98e3047
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254865
Reviewed-on: http://review.coreboot.org/9837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a raw application of the following spatch to src/:
@@
expression A, V;
@@
- writel(V, A)
+ write32(A, V)
@@
expression A, V;
@@
- writew(V, A)
+ write16(A, V)
@@
expression A, V;
@@
- writeb(V, A)
+ write8(A, V)
@@
expression A;
@@
- readl(A)
+ read32(A)
@@
expression A;
@@
- readb(A)
+ read8(A)
BRANCH=none
BUG=chromium:444723
TEST=None (depends on next patch)
Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6
Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254864
Reviewed-on: http://review.coreboot.org/9836
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a raw application of the following spatch to the
directories src/arch/arm(64)?, src/mainboard/<arm(64)-board>,
src/soc/<arm(64)-soc> and src/drivers/gic:
@@
expression A, V;
@@
- write32(V, A)
+ writel(V, A)
@@
expression A, V;
@@
- write16(V, A)
+ writew(V, A)
@@
expression A, V;
@@
- write8(V, A)
+ writeb(V, A)
This replaces all uses of write{32,16,8}() with write{l,w,b}()
which is currently equivalent and much more common. This is a
preparatory step that will allow us to easier flip them all at once to
the new write32(a,v) model.
BRANCH=none
BUG=chromium:451388
TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky.
Change-Id: I16016cd77780e7cadbabe7d8aa7ab465b95b8f09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93f0ada19b429b4e30d67335b4e61d0f43597b24
Original-Change-Id: I1ac01c67efef4656607663253ed298ff4d0ef89d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254862
Reviewed-on: http://review.coreboot.org/9834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
if DCDC_UV_ACT_REG setted, when the buck voltage drop to 85%,
rk808 will reset this buck, but now when the current consumption large,
rk808 may miscarriage of justice this status, so we must disable this function
BUG=chrome-os-partner:34834
TEST=Boot from jerry, and do RUNIN test sucess
BRANCH=None
Change-Id: I08cef73b88d6c2722b389c632c7db29605f4545d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 858c8abc11a824fc3d991a39a49710243f4b1473
Original-Change-Id: I46ebe332c576eebd3386b5042b146a8b57a5c194
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/254496
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9831
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The wrong offsets were being used for the GRF_SOC_CON2 register. This also
configures odt based on the value of odt in the sdram_params for lpddr systems.
BUG=chrome-os-partner:37346
TEST=boot veyron_speedy and veyron_jerry
BRANCH=None
Change-Id: I13ec3d0df162fe73fabf8af40dd5472e15d6f6af
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 403ab13de17290dc3766bd6f1a03b6effbe58b41
Original-Change-Id: Ic0c18cc7ccf861ef8749e6c950fab9a2802e5f26
Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255584
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When using single-channel ddr, DMC channel 1 need to reset dll,
otherwise it will lead to pmdomain idle request fails.
BUG=chrome-os-partner:35654
BRANCH=veyron
TEST=boot rialto
Change-Id: Id6b673187c688d238e9a391b3d98720c783e3af4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 927e8426104f8869e139c3f60a04cd49bf726e61
Original-Change-Id: I8be1567040ddb5f2a2b0d06568e517d794ead87a
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250060
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9819
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The ramstage is loaded from romstage, so the LZMA scratchpad buffer used
to decompress it is part of the romstage BSS in SRAM. On RK3288, SRAM
cannot be cached which makes the decompression so slow that it's faster
to just load an uncompressed image from SPI. Disable ramstage
compression on this SoC to account for that.
[pg: implementation avoids restructuring all of Kconfig]
BRANCH=None
BUG=None
TEST=Built for Pinky and Falco, confirmed that the former didn't have
COMPRESS_RAMSTAGE in its .config and the latter still did. Measured a
speed-up of about 35ms on Pinky. (For some weird reason, the
decompression of the payload also takes way longer than on other
platforms, although not as long as the ramstage. I have no explanation
for that and can't really think of a good way to figure it out... maybe
the Cortex-A12 is just terrible at some operation that LZMA uses a lot?)
Change-Id: I9f67f7537696ec09496483b16b59a8b73f4cb11b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/234192
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9792
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds the necessary platform glue to allow the use of
software-driven I2C bit banging on the RK3288. This is just a debugging
feature that can be used to reproduce certain I2C failure cases.
Also fix Makefile verstage linking for the feature and add some new
rk3288 IOMUX macros as needed.
BRANCH=None
BUG=None
TEST=Added "CONFIG_SOFTWARE_I2C=y" to configs/config.veyron_jerry,
wrapped Jerry's bootblock and verstage in software_i2c_attach/detach()
calls, confirmed that both PMIC and TPM could be driven correctly with
software I2C driver. Tried out different combinations of
software_i2c_wedge_ack() and software_i2c_wedge_read() on the PMIC and
observed transfer results with the hardware controller after reboot...
the worst that would happen is that the first register read-modify-write
(DCDC_ILMAX) would fail to read, but all later transfers would be fine.
Since that register is written twice (due to current BUCK1 ramp
implementation) and is not terribily important anyway, I think we don't
need to worry about wedging problems.
Change-Id: Iba801ee61d30fb1fd3aef8300612c67fa50c441b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24dfca9bab38a20c40ef0c2dd4c775b8d8f47487
Original-Change-Id: I96777300a57c85471bad20e23a455551e9970222
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/247890
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9757
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Many ChromeOS devices use a GPIO to reset the system, in order to
guarantee that the TPM cannot be reset without also resetting the CPU.
Often chipset/SoC hardware watchdogs trigger some kind of built-in
CPU reset, bypassing this GPIO and thus leaving the TPM locked. These
ChromeOS devices need to detect that condition in their bootblock and
trigger a second (proper) reboot.
This patch adds some code to generalize this previously
mainboard-specific functionality and uses it on Veyron boards. It also
provides some code to add the proper eventlog entry for a watchdog
reset. Since the second reboot has to happen before firmware
verification and the eventlog is usually only initialized afterwards, we
provide the functionality to place a tombstone in a memlayout-defined
location (which could be SRAM or some MMIO register that is preserved
across reboots).
[pg: Integrates
'mips: Temporarily work around build error caused by <arch/io.h> mismatch]
BRANCH=veyron
BUG=chrome-os-partner:35705
TEST=Run 'mem w 0xff800000 0x9' on a Jerry, watch how a "Hardware
watchdog reset" event appears in the eventlog after the reboot.
Change-Id: I0a33820b236c9328b2f9b20905b69cb934326f2a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fffc484bb89f5129d62739dcb44d08d7f5b30b33
Original-Change-Id: I7ee1d02676e9159794d29e033d71c09fdf4620fd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242404
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Id: c919c72ddc9d2e1e18858c0bf49c0ce79f2bc506
Original-Change-Id: I509c842d3393bd810e89ebdf0dc745275c120c1d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/242504
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9749
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
