summaryrefslogtreecommitdiff
path: root/src/soc/rockchip/rk3399
AgeCommit message (Expand)Author
2017-11-28rockchip/rk3399: mipi: correct phy parameter settingLin Huang
2017-11-28rockchip/rk3399: mipi: Fix LOOP_DIV_HIGH_SEL to be 4 bits wideLin Huang
2017-06-26rockchip/rk3399: update the ddr 200MHz frequency configurationCaesar Wang
2017-06-19rockchip/rk3399: fix DRAM gate training issueLin Huang
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
2017-05-26rockchip/rk3399: fix rk_mipi_dsi_phy_init errNickey Yang
2017-05-24rk3399: Reshuffle memlayout to move PRERAM_CBMEM_CONSOLE further backJulius Werner
2017-05-18rockchip/rk3399: soc: resize reserve memoryXing Zheng
2017-05-18rockchip/rk3399: Add MIPI driverNickey Yang
2017-05-18rockchip/rk3399: remove the delay for enabling SSCCaesar Wang
2017-05-11rockchip/rk3399: enable DPLL SSC for DDR EMI test on bobCaesar Wang
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
2017-01-24rockchip/rk3399: set edp pclk to 25MHzLin Huang
2017-01-123rdparty: update arm-trusted-firmware submoduleMartin Roth
2016-12-13rockchip: rk3399: change emmc clk to 148.5MHzZiyuan Xu
2016-12-06rockchip/rk3399: sdram: use register to calculate sdram sizesLin Huang
2016-12-05rockchip/rk3399: display: Update edp initialization retryMartin Roth
2016-12-03rockchip/rk3399: Fix typoPatrick Georgi
2016-11-29rockchip/rk3399: display: Retry edp initialization if it failsLin Huang
2016-11-17rockchip/rk3399: Change 933 DPLL to low jitter rateDerek Basehore
2016-11-17rockchip/rk3399: Change PLL configuration to match Linux kernelJulius Werner
2016-11-14soc/rockchip: split edp_enable() functionLin Huang
2016-11-03rockchip/rk3399: sdram.c: Fix msch ddrconfig register errorLin Huang
2016-11-02rockchip/rk3399: display: Do not allocate framebuffer in corebootLin Huang
2016-11-02rockchip/rk3399: sdram: Reset system if switch to index1 failsLin Huang
2016-11-02rockchip/rk3399: sdram: Fix data training functionLin Huang
2016-11-02rockchip/rk3399: sdram: also prepare the index1 configurationLin Huang
2016-11-02rockchip/rk3399: Reserve enough framebuffer memory for 32bpp hires panelsJulius Werner
2016-10-25rockchip/rk3399: reset system if DDR init failsLin Huang
2016-10-18rk3399: display: Use edid_set_framebuffer_bits_per_pixel() helperJulius Werner
2016-10-08rockchip/rk3399: Add Type-C PHY initWilliam wu
2016-10-07rockchip/rk3399: Actually remove big CPU initialization from bootblockJulius Werner
2016-10-07rockchip/rk3399: select rank before triggering trainingDerek Basehore
2016-10-07rockchip/rk3399: Improve dram stability when run at high frequencyLin Huang
2016-10-06rockchip/rk3399: Configure USB3 controller to work in USB2 only modeLiangfeng Wu
2016-10-06rockchip: rk3399: improve write leveling flowJianqun Xu
2016-10-06rockchip/rk3399: Move TTB to the end of SRAMJulius Werner
2016-10-06rockchip: Correct and standardize clock divisor range assertionsJulius Werner
2016-10-06rockchip/rk3399: Move big CPU cluster initialization into ramstageJulius Werner
2016-10-04rockchip/rk3399: Fix rkclk_init() to actually use PERILP1_PCLK_HZJulius Werner
2016-10-04rockchip: Remove pulls for gpio_output(), clean up codeJulius Werner
2016-10-04rockchip/rk3399: Remove CONFIG_ARM64_A53_ERRATUM_843419Julius Werner
2016-09-20gru: Add watchdog reset supportJulius Werner
2016-09-20gru: Add USB 2.0 PHY tuning for KevinJulius Werner
2016-08-31rockchip/rk3399: Add pwm_regulator.c for pwm then ramp boot up cpuEric Gao
2016-08-31rockchip/rk3399: Move romstage.c to mainboard/gruShunqian Zheng
2016-08-27rockchip/rk3399: Enable ramstage compression, shuffle around memlayoutJulius Werner
2016-08-27gru: Make SDRAM parameters individual struct files in CBFSJulius Werner
2016-08-19rockchip/rk3399 & gru/kevin: support sdram 933MHz on kevinLin Huang
2016-08-17google/gru: Add new PWM regulator duty numbers for revision 6Julius Werner
2016-08-16Revert "rockchip: rk3399: enable sdhci clk for emmc"Shunqian Zheng
2016-08-11rockchip/rk3399: Add code to neuter Type-C PHY for firmware USBJulius Werner
2016-08-09rockchip/rk3399: sdram: correct read obs and set DQS driver registerLin Huang
2016-08-03google/gru: Add code to support I2C TPM for KevinJulius Werner
2016-07-28rockchip/rk3399: sdram: correct controller vref settingLin Huang
2016-07-25rockchip/rk3399: set CA drive strength to 48ohmsLin Huang
2016-07-19rockchip/rk3399: Remove unused variableMartin Roth
2016-07-18gru: implement hw reset functionVadim Bendebury
2016-07-15rockchip/rk3399: extend romstage rangeLin Huang
2016-07-15rockchip/rk3399: set kevin rev3 pwm regulator initial value to 0.95vLin Huang
2016-07-15rockchip/rk3399: Remove empty function in sdram.cDerek Basehore
2016-07-15rockchip/rk3399: Change copy_to_reg arg typeDerek Basehore
2016-07-15rockchip/rk3399: Directly access variables in sdram.cDerek Basehore
2016-07-15rockchip/rk3399: cleanup variables in dram_all_configDerek Basehore
2016-07-15rockchip/rk3399: add/remove local variables to sdram_initDerek Basehore
2016-07-13rk3399: allow more room for CBMEM consoleVadim Bendebury
2016-07-12rockchip/rk3399: Fix pinctrl pull bias settingsShunqian Zheng
2016-07-12rockchip/rk3399: initialize apll_bLin Huang
2016-07-12rockchip/rk3399: Use apll instead of apll_l defineLin Huang
2016-07-12rockchip/rk3399: calculate clocks based on parent clock speedLin Huang
2016-07-12rockchip/rk3399: Clean up comments in sdram.cDerek Basehore
2016-07-07soc: Remove newline from `CHIP_NAME`Paul Menzel
2016-06-24rk3399: clean up sdram controller initialization codeVadim Bendebury
2016-06-23rockchip/rk3399: fix sdram training issueLin Huang
2016-06-23rockchip/rk3399: Clean up voltage rail settingsLin Huang
2016-06-23rk3399: add definition for SP0 iomuxVadim Bendebury
2016-06-12rockchip: rk3399: pass board specific message to BL31Lin Huang
2016-06-12Kconfig: Set VBOOT_OPROM_MATTERS for relevant non-x86 devicesJulius Werner
2016-06-12rockchip: gru: Add USB DRD DWC3 controller supportLiangfeng Wu
2016-06-08rockchip: rk3399: Add support i2sXing Zheng
2016-06-08gru: kevin: configure board GPIOsVadim Bendebury
2016-06-08rk3399: add ability to configure SPI5Vadim Bendebury
2016-06-07rockchip: gru: update the hynix lpddr3 config to run at 928MHzShunqian Zheng
2016-06-03rockchip: gru: enable eDP displayLin Huang
2016-06-03rockchip: rk3399: initialize display for eDPShunqian Zheng
2016-05-18rockchip: rk3399: enable sdhci clk for emmcShunqian Zheng
2016-05-18rockchip: rk3399: configure emmc clkLin Huang
2016-05-18rk3399: add GPIO register definitions for SDMMC0Vadim Bendebury
2016-05-18rockchip: rk3399: improve sdram driverLin Huang
2016-05-18rockchip: rk3399: add tsadc driverShunqian Zheng
2016-05-18rockchip: rk3399: add routines to set vop clocksShunqian Zheng
2016-05-09drivers/uart: Use uart_platform_refclk for all UART modelsLee Leahy
2016-05-09rockchip/rk3399: protect the DRAM address for atfCaesar Wang
2016-05-09google/gru: enable pp1500 and pp3000 rails as soon as possibleVadim Bendebury
2016-05-09rockchip/rk3399: Set all 4 DVFS voltage rails to 1.1V @300kHzVadim Bendebury
2016-05-09rockchip: rk3399: support saradcLin Huang
2016-05-09rockchip: rk3399: enable arm trust firmwareLin Huang
2016-05-09rockchip: make sure sdram top does not spill into MMIO spaceLin Huang
2016-05-09rockchip: rk3399: add sdram driverLin Huang