summaryrefslogtreecommitdiff
path: root/src/soc/qualcomm/sc7180
AgeCommit message (Collapse)Author
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
"Die()" needs <console/console.h>. Change-Id: I250988d77b0b0a093a1d116bea44a0cbb84189dd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
"printk()" needs <console/console.h>. Change-Id: Iac6b7000bcd8b1335fa3a0ba462a63aed2dc85b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-13mrc_cache: Move code for triggering memory training into mrc_cacheShelley Chen
Currently the decision of whether or not to use mrc_cache in recovery mode is made within the individual platforms' drivers (ie: fsp2.0, fsp1.1, etc.). As this is not platform specific, but uses common vboot infrastructure, the code can be unified and moved into mrc_cache. The conditions are as follows: 1. If HAS_RECOVERY_MRC_CACHE, use mrc_cache data (unless retrain switch is true) 2. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_BOOTBLOCK, this means that memory training will occur after verified boot, meaning that mrc_cache will be filled with data from executing RW code. So in this case, we never want to use the training data in the mrc_cache for recovery mode. 3. If !HAS_RECOVERY_MRC_CACHE && VBOOT_STARTS_IN_ROMSTAGE, this means that memory training happens before verfied boot, meaning that the mrc_cache data is generated by RO code, so it is safe to use for a recovery boot. 4. Any platform that does not use vboot should be unaffected. Additionally, we have removed the MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN config because the mrc_cache driver takes care of invalidating the mrc_cache data for normal mode. If the platform: 1. !HAS_RECOVERY_MRC_CACHE, always invalidate mrc_cache data 2. HAS_RECOVERY_MRC_CACHE, only invalidate if retrain switch is set BUG=b:150502246 BRANCH=None TEST=1. run dut-control power_state:rec_force_mrc twice on lazor ensure that memory retraining happens both times run dut-control power_state:rec twice on lazor ensure that memory retraining happens only first time 2. remove HAS_RECOVERY_MRC_CACHE from lazor Kconfig boot twice to ensure caching of memory training occurred on each boot. Change-Id: I3875a7b4a4ba3c1aa8a3c1507b3993036a7155fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46855 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06sc7180: Correct mmu configuration for AOP SRAM regionsT Michael Turney
NOC errors detected at runtime in AOP SRAM region strongly suggested speculative memory accesses were occurring in memory regions that either don't exist or are device memory rather than SRAM. Signed-off-by: T Michael Turney <mturney@codeaurora.org> Change-Id: I6611dc614c80063c7df057b59337417c8f56fd9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/47261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-02sc7180: Fix prefill requirement and correct the fetch start checkVinod Polimera
With Innolux panel timings, the fetch_start has evaluated to be more than v_total which is invalid. Add a check to accommodate the extra h_total addition in fetch_start calculation. Secondly, made the prefill line requirement same as Kernel driver. Change-Id: If7624c0b28421759fdf47dd92f23214a78058199 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-11-02sc7180: Add Modem region in memlayout to avoid modem cleanup in Secboot reboot.mkurumel
two different modem regions wifi and lte to be handled in QC_SEC and modem Change-Id: Ib4592ca66d3d0db4c4768be4cd27422fe9f786b8 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-23sc7180: enable RECOVERY_MRC_CACHEShelley Chen
Enable caching of memory training data for recovery as well as normal mode because memory training is taking too long in recovery as well. This required creating a space in the fmap for RECOVERY_MRC_CACHE. BUG=b:150502246 BRANCH=None TEST=Run power_state:rec twice on lazor. Ensure that on first boot, memory training occurs and on second boot, memory training is skipped. Change-Id: Id9059a8edd7527b0fe6cdc0447920d5ecbdf296e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46651 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-17trogdor/sc7180: Clarify USE_QC_BLOBS requirementsJulius Werner
This patch adds some Kconfig hints to make it clearer that the USE_QC_BLOBS option is required for SC7180 boards and guide the user in the right direction through menuconfig. Also add those little arrows to the Trogdor board options that are there on most other boards. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I973cae8026a229408a1a1817c4808b0266387ea7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-10-13sc7180: Enable bootblock compressionJulius Werner
This patch enables bootblock compression on SC7180. In my tests, that makes it boot roughly 10ms faster (which isn't much, but... might as well take it). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ibbe06eeb05347cc77395681969e6eaf1598b4260 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45855 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09trogdor: Modify DDR training to use mrc_cacheShelley Chen
Currently, trogdor devices have a section RO_DDR_TRAINING that is used to store memory training data. Changing so that we reuse the same mrc_cache API as x86 platforms. This requires renaming RW_DDR_TRAINING to RW_MRC_CACHE and removing RO_DDR_TRAINING in the fmap table. BUG=b:150502246 BRANCH=None TEST=FW_NAME="lazor" emerge-trogdor coreboot chromeos-bootimage Make sure that first boot after flashing does memory training and next boot does not. Boot into recovery two consecutive times and make sure memory training occurs on both boots. Change-Id: I16d429119563707123d538738348c7c4985b7b52 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-07sc7180: Remove LIMITS_CFG loading in romstage.mkurumel
LIMITS_CFG is not used/required by trogdor. Supporting this requires an FMAP partition as well as code, removing this support saves space and maintenance headaches. Change-Id: I9f57f5b520599ba6d708c91df9851e0e86b4b6c0 Signed-off-by: Manideep Kurumella <mkurumel@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45704 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-21soc/qualcomm: Drop unneeded empty linesElyes HAOUAS
Change-Id: If76502ff91896959ef171c192b4fc138dff18fc6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-16sc7180: report hardware watchdog reset after rebootRavi Kumar Bokka
add WATCHDOG_TOMBSTONE in memlayout.ld Change-Id: I57ece39ff3d49f2bab259cbd92ab039a49323119 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-15sc7180: clock: Remove unwanted QUPv3 FrequencyTaniya Das
As the UART clock frequency is no longer required by the UART driver, remove the unwated frequency. Tested: Compile and boot up testing. Change-Id: I137682b3ca45481ad34ac8ddb5cd308444f752a7 Signed-off-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-15sc7180: Remove QcLib specific changes from CB UARTRoja Rani Yarubandi
To achieve 115200 baudrate QcLib reconfigures UART frequency with the lowest supported frequency from QUP clock table. With this console logs were getting corrupted at qclib stage. In ChromeOS coreboot, baudrate is configuarable using Kconfig. QcLib should not assume the baudrate and reconfigure any UART register once after the configuration is done in coreboot. To fix the issue QcLib done the changes to not to reconfigure any UART registers. Hence clock_configure_qup() is not required in coreboot UART driver. Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Change-Id: I2531b64eddfa6e877f769af0d17be61f5e4d0c35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-12include/console/uart: make index parameter unsignedFelix Held
The UART index is never negative, so make it unsigned and drop the checks for the index to be non-negative. Change-Id: I64bd60bd2a3b82552cb3ac6524792b9ac6c09a94 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-10sc7180: Add display hardware pipe line initializationVinod Polimera
Add sc7180 display hardware pipeline programming support and invoke the display initialization from soc_init. Changes in V1: - added display init required check. - added edid read function using i2c communication. - added sn65dsi86 bridge driver to init bridge. - moved display initialization to mainboard file. Changes in V2: - moved diplay init sequence to mainboard file - moved edid read function to bridge driver. - calculated timing paramters using edid parameters. - removed command mode config code. - moved bridge driver to drivers/ti. - seperated out bridge and soc code with mainboard file as interface. Changes in V3: - add GPIO selection at runtime based on boardid. - add vbif register struct overlay. Changes in V4: - update gpio config for lazor board. Change-Id: I7d5e3f1781c48759553243abeb3d694f76cd008e Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: Add display dsi interface programmingVinod Polimera
This change adds support for sc7180 dsi interface host programming. Changes in V1: - remove dual dsi config code. - update register access using struct overlays. - remove dsc config & command mode code. Changes in V2: - remove dsi read and write functions. - remove target and panel related code. Changes in V3: - move prototypes to headers. - define macros for constants. Changes in V4: - define register bits instead of hardcoded values. Change-Id: Ie64354ce8bc2a64b891fb9478fbca38d6ec4c321 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-10sc7180: enable bl31T Michael Turney
Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/28014/44 Change-Id: Ia961ee0e30478e21fd786ce464655977449df510 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09sc7180: Add display 10nm phy & pll programming supportVinod Polimera
Adds basic headers as well as source required for display dsi 10nm phy & pll programming. Changes in V1: - add struct overlays to model hardware registers. - remove typedef structures. - remove dead code such as dual dsi,split config etc. Changes in V2: - remove panel related header files. - update the bitclock calculation using edid parameters. - add phy timing calculation function. - update copyright license. Changes in V3: - update the mdss clock structure. - remove dsi_phy_configinfo_type struct. - remove unused struct fields. Changes in V4: - update clock apis. - remove unused structures. Change-Id: I8ff400922ae594f558cf73a5aaa433a3a93347c2 Signed-off-by: Vinod Polimera <vpolimer@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09sc7180: clock: Add display external clock in corebootTaniya Das
Add support for display external clock in coreboot for SC7180. Tested: Display clocks are configured. Change-Id: Ida222890252b80db738fa1f685b212b3f7c6e689 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09trogdor: Change Memlayout to increase QcLib region from 512 to 596kBAshwin Kumar
Change-Id: I49008ea9bc6254c745352b2e8ee965ddc2e8e5e4 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-09trogdor: SoC makefile blob supportashk
Following blobs will includes with SoC makefile: * AOP * BOOT * QTISECLIB * QCSEC * QUPV3FW Change-Id: I85a20ef31ec91c6f22221d16fd4c3097c5cb97d1 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-02src: Drop redundant 'select BOOTBLOCK_CONSOLE'Elyes HAOUAS
BOOTBLOCK_CONSOLE is already set to yes in console/Kconfig file. Change-Id: I2a4ee517795bc7b378afc5eae92e2799ad36111b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-18src: Remove unused 'include <delay.h>'Elyes HAOUAS
Change-Id: I6afea5c102299e570378a1656d3dcd329a373399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44093 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-18src: Remove unuse '<timestamp.h>Elyes HAOUAS
Change-Id: I4fa03c4576bb0256b73f1d36ca840e120b750a74 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-18src: Remove unused '<halt.h>'Elyes HAOUAS
Change-Id: I3037edf89c933f4f136ca61d6a5bce41126ec6b9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-08-03qualcomm/sc7180: Fix TLMM assignments for GPIOs 29, 31 and 32Julius Werner
According to my SC7180 reference manual, these three GPIOs are in the NORTH TLMM, but our pin table lists them as SOUTH. That means all accesses our code has been doing to them have just been hitting empty address space. BUG=b:160115694 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If9c03ac890a7975855394c2e08b8433472df204d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-07-26src/soc/qualcomm: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I6b89bd9616b3f091d6694f9cc20b4bd1a74aad3b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-14src: Remove unused 'include <stdint.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<' Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-14src: Remove unused 'include <types.h>'Elyes HAOUAS
Files found using: diff <(git grep -l '#include <types.h>' -- src/) <(git grep -l 'BIT(\|size_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\|MAYBE_STATIC_NONZERO\|zeroptr\|int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|bool\|true\|false\|cb_err\|CB_SUCCESS\|CB_ERR\|CB_ERR_ARG\|CB_CMOS_\|CB_KBD_\|CB_I2C_\|cb_err_t\|DIV_ROUND_CLOSEST\|container_of\|__unused\|alloca(\|ARRAY_SIZE\|ALIGN\|ALIGN_UP\|ALIGN_DOWN\|IS_ALIGNED\|__CMP_UNSAFE\|MIN_UNSAFE\|MAX_UNSAFE\|__CMP_SAFE\|__CMP\|MIN(\|MAX(\|ABS(\|IS_POWER_OF_2\|POWER_OF_2\|DIV_ROUND_UP\|SWAP(\|KiB\|MiB\|GiB\|KHz\|MHz\|GHz\|offsetof(\|check_member\|member_size' -- src/)|grep -v vendor |grep '<' Change-Id: I5d99d844cc58d80acb505d98da9d3ec76319b2eb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41677 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-22soc/qualcomm/sc7180/qupv3_config.c: Add missing includesElyes HAOUAS
Add <string.h> and <cbfs.h> Change-Id: I7e66a3cbf50fa27b4f6be6885b324de90eddd387 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-06-13treewide: Add Kconfig variable MEMLAYOUT_LD_FILEFurquan Shaikh
This change defines a Kconfig variable MEMLAYOUT_LD_FILE which allows SoC/mainboard to provide a linker file for the platform. x86 already provides a default memlayout.ld under src/arch/x86. With this new Kconfig variable, it is possible for the SoC/mainboard code for x86 to provide a custom linker file as well. Makefile.inc is updated for all architectures to use this new Kconfig variable instead of assuming memlayout.ld files under a certain path. All non-x86 boards used memlayout.ld under mainboard directory. However, a lot of these boards were simply including the memlayout from SoC. So, this change also updates these mainboards and SoCs to define the Kconfig as required. BUG=b:155322763 TEST=Verified that abuild with --timeless option results in the same coreboot.rom image for all boards. Change-Id: I6a7f96643ed0519c93967ea2c3bcd881a5d6a4d6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42292 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02src: Remove unused '#include <timer.h>'Elyes HAOUAS
Change-Id: I57e064d26b215743a1cb06bb6605fc4fe1160876 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41491 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|atol\|strrchr\|skip_atoi\|STRINGIFY' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ibaeec213b6019dfa9c45e3424b38af0e094d0c51 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41242 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-13src/mainboard: Remove unused 'include <stdlib.h>'Elyes HAOUAS
Found using following commande: diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l ' memalign\|malloc\|free' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ib2ee840a10de5c10d57aa7a75b805ef69dc8da84 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11sc7180: clock: Add support to bump CPU levelsTaniya Das
Add support to configure the Silver and L3 PLLs and switch the APSS GFMUX to use the PLL to speed up the boot cores. Tested: CPU speed frequency validated for speed bump Change-Id: Iafd3b618fb72e0e8cc8dd297e4a3e16b83550883 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-11sc7180: Adjust memory allocations per upstream commentsT Michael Turney
Update memory regions, etc. Change-Id: If852fe4465fb431809570be6cdccff3ad9d9f4f0 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39362 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11sc7180: Fix for hang during DMA transfer in SPI-NOR flash driversatya priya
Transfer sequence used by SPI-Flash application present in CB/DC. 1. Assert CS through GPIO 2. Data transfer through QSPI (involves construction of command descriptor for multiple read/write transfers) 3. De-assert CS through GPIO. With above sequence, in DMA mode we dont have the support for read transfers that are not preceded by write transfer in QSPI controller. Ex: "write read read read" sequence results in hang during DMA transfer, where as "write read write read" sequence has no issue. As we have application controlling CS through GPIO, we are making fragment bit "set" for all transfers, which keeps CS in asserted state although the ideal way to operate CS is through QSPI controller. Change-Id: Ia45ab793ad05861b88e99a320b1ee9f10707def7 Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39807 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08soc/qualcomm: Replace GPLv2 long form headers with SPDX headerElyes HAOUAS
Change-Id: Ib51e5e9c6159e9b3c2890d0455343bcc0c14b6fe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-06treewide: replace GPLv2 long form headers with SPDX headerPatrick Georgi
This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: move copyrights and authors to AUTHORSPatrick Georgi
Also split "this is part of" line from copyright notices. Change-Id: Ibc2446410bcb3104ead458b40a9ce7819c61a8eb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: Move "is part of the coreboot project" line in its own commentPatrick Georgi
That makes it easier to identify "license only" headers (because they are now license only) Script line used for that: perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist... Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-30sc7180: Increase SPI flash frequency to 37.5MHzJulius Werner
It seems that all SC7180 boards we have can well handle 37.5MHz of SPI flash speed, so bump that up from the current 25MHz so that we don't leave boot speed on the table. (The next step would be 50MHz which currently doesn't work on all boards so we're not going there yet.) BUG=b:117440651 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id6e98fcbc89f5f3bfa408c7e8bbc90b4c92ceeea Reviewed-on: https://review.coreboot.org/c/coreboot/+/40874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-04-21sc7180: Add I2C driversatya priya
Add I2C functionality in coreboot. Change-Id: I61221ffff8afe5c7ede5abb9e194e242ab0274d8 Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36830 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-21sc7180: Add SPI QUP driverT Michael Turney
This implements the SPI driver for the QUP core. Change-Id: I86f4fcff6f9537373f70a43711130d7f28bd5e09 Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36517 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-21sc7180: Add UART supportT Michael Turney
This implements the UART driver in SoC Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/25373/78 Change-Id: I6494daa108197c030577ac86dab71f9ca6c21bdb Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35500 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-21sc7180: Add QUPv3 FW load & configT Michael Turney
UART driver requires firmware loading Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/25372/78 https://review.coreboot.org/c/coreboot/+/27483/58 Change-Id: I4d91dd10488931247f81a87b0bdcc598f4bceb31 Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-04-21sc7180: clock: Define the UART frequency for QUPV3Taniya Das
The frequency to be used by UART client is 7.3728MHz, thus define it in the clock header to be used by the driver. Tested: UART frequency request by client driver. Change-Id: I1ced350fe9826ea05b03ffc11aced2c21fe85c9e Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-04-05soc/qualcomm: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: Ie78224f9bedd6ec3f0f10a58bb5dceeb35b73241 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-18soc: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-10src: Remove unneeded 'include <arch/cache.h>'Elyes HAOUAS
Change-Id: I6374bc2d397800d574c7a0cc44079c09394a0673 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37984 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-07sc7180: clock: Fix QUP DFSR configuration for perf levelsTaniya Das
Update the QUP DFSR cmd to clear the SW control and also update the perf registers when M is set. While at it also update the d_2 values. Tested: validated DFSR clock configuration and M/N/D values. Change-Id: I6bba1c6f99810963aaa607885ef400c523c0e905 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-26src: Remove unused include <string.h>Elyes HAOUAS
Change-Id: Ic6b66dd8fa387e67bb0ce609fb7e2553eeb66b3c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-12-16sc7180: clock: Add support for QUP DFSR configurationTaniya Das
Support configuring the qup dfsr registers. Tested: validated DFSR clock configuration and M/N/D values. Change-Id: I146ac7c2197606965265f2a770769312af76041e Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-05soc/qualcomm/sc7180: Adapt to recent API changesPatrick Georgi
Definitions were moved so that now device/mmio.h needs to be included instead of arch/mmio.h. Also, don't use le32 conversion. This follows the activities of commit 55009af42 (Change all clrsetbits_leXX() to clrsetbitsXX()) and commit 1c371572188 (mmio: Add clrsetbitsXX() API in place of updateX()). Change-Id: Ie3af0d4f0b3331fe5572fc56915952547b512db7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37534 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-05sc7180: Add USB supportT Michael Turney
This includes USB QUSB2,QMP Phy and Controller support And libpayload support for USB Change-Id: I0651fc28dc227efbeb23eeefe9b96a3b940ae995 Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35503 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-05sc7180: Add AOP firmware supportRavi Kumar Bokka
Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/25210/85 Change-Id: I1cd552fbf03b5135e5911f1143f8778cad81e360 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-05sc7180: Add SPI-NOR supportAkash Asthana
This implements the SPI-NOR driver for the Qualcomm QSPI core. Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/27483/58 Change-Id: I2eb8cf90aa4559541ba293b3fd2870896bed20b7 Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35501 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-05sc7180: Add clock driverTaniya Das
Add support for clock driver for SC7180 Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/31083/6 Change-Id: I3f39252c887c36e8af43bc49289795000e4638d8 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-04Change all clrsetbits_leXX() to clrsetbitsXX()Julius Werner
This patch changes all existing instances of clrsetbits_leXX() to the new endian-independent clrsetbitsXX(), after double-checking that they're all in SoC-specific code operating on CPU registers and not actually trying to make an endian conversion. This patch was created by running sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g' across the codebase and cleaning up formatting a bit. Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-11-14lib/fmap: Add optional pre-RAM cacheJulius Werner
This patch adds an optional pre-RAM cache for the FMAP which most platforms should be able to use, complementing the recently added post-RAM FMAP cache in CBMEM. vboot systems currently read the FMAP about half a dozen times from flash in verstage, which will all be coalesced into a single read with this patch. It will also help future vboot improvements since when FMAP reads become "free" vboot doesn't need to keep track of so much information separately. In order to make sure we have a single, well-defined point where the new cache is first initialized, eliminate the build-time hardcoding of the CBFS section offsets, so that all CBFS accesses explicitly read the FMAP. Add FMAP_CACHEs to all platforms that can afford it (other than the RISC-V things where I have no idea how they work), trying to take the space from things that look like they were oversized anyway (pre-RAM consoles and CBFS caches). Change-Id: I2820436776ef620bdc4481b5cd4b6957764248ea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-11-03arch/arm64: Pass cbmem_top to ramstage via calling argumentArthur Heymans
This solution is very generic and can in principle be implemented on all arch/soc. Currently the old infrastructure to pass on information from romstage to ramstage is left in place and will be removed in a follow-up commit. Nvidia Tegra will be handled in a separate patch because it has a custom ramstage entry. Instead trying to figure out which files can be removed from stages and which cbmem_top implementations need with preprocessor, rename all cbmem_top implementation to cbmem_top_romstage. Mechanisms set in place to pass on information from rom- to ram-stage will be replaced in a followup commit. Change-Id: I86cdc5c2fac76797732a3a3398f50c4d1ff6647a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-01lib/cbmem_top: Add a common cbmem_top implementationArthur Heymans
This adds a common cbmem_top implementation to all coreboot target. In romstage a static variable will be used to cache the result of cbmem_top_romstage. In ramstage if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is set a global variable needs to be populated by the stage entry with the value passed via the calling arguments. if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is not set the same implementation as will be used as in romstage. Change-Id: Ie767542ee25483acc9a56785ce20a885e9a63098 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-01sc7180: support bitbang UART w/gpioT Michael Turney
Change-Id: I21b149500849eceea663d18a0880c6443ae47d9b Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35498 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-01sc7180: Add gpio driverTaniya Das
Add support for gpio driver for SC7180 Developer/Reviewer, be aware of this patch from Napali: https://review.coreboot.org/c/coreboot/+/30003/25 https://review.coreboot.org/c/coreboot/+/31083/15 Change-Id: I12bdbeb97765b6ae1e015ca35108008bf82801cc Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-21sc7180: Provide initial SoC supportT Michael Turney
Change-Id: Iddcef560c1987486436b73ca1d5fc83cee2f713c Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 22:23:36 +0000