summaryrefslogtreecommitdiff
path: root/src/soc/qualcomm/common
AgeCommit message (Collapse)Author
2022-12-09mem_chip_info: Update to new formatJulius Werner
The original version of the mem_chip_info structure does not record rank information and does not allow precise modeling of certain DDR configurations, so it falls short on its purpose to compile all available memory information. This patch updates the format to a new layout that remedies these issues. Since the structure was introduced so recently that no firmware using it has been finalized and shipped yet, we should be able to get away with this without accounting for backwards compatibility. BRANCH=corsola Cq-Depend: chromium:3980175 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If34e6857439b6f6ab225344e5b4dd0ff11d8d42a Reviewed-on: https://review.coreboot.org/c/coreboot/+/68871 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com>
2022-11-23src/soc/qualcomm: Remove unnecessary space after castsElyes Haouas
Change-Id: Ic6c711fe3fad19c24ca4c01f8d0a4bc002f14bd6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69807 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-18soc/qualcomm/sc7280: Skip PCIe ops for eMMC SKUsShelley Chen
On Herobrine, we will determine if we have an NVMe device based on SKU id. Basically, if bit 0 is 2 (or Z), then we know that we have an NVMe device and thus will need to go through PCIe initialization. Otherwise, we know that we are booting an eMMC device. BUG=b:254281839 BRANCH=None TEST=build firmware image and boot and make sure we can boot up Tested on villager, which does not have NVMe and made sure that it boots still. Check cbmem dump to make sure that device configuration entry is still low since it's not initializing PCIe devices: 40:device configuration 730,203 (1,295) Change-Id: I1fa0ad392ba6320fdbab54b3b5dc83ac28cd20ba Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69690 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-18mb/google/herobrine: Implement mainboard_needs_pcie_initShelley Chen
Implement mainboard_needs_pcie_init() for herobrine in order to determine if we need to initialize the pcie links. When the SKU id is unknown or unprovisioned (for example at the beginning of the factory flow), we should still initialize PCIe. Otherwise the devices with NVMe will fail to boot. BUG=b:254281839 BRANCH=None TEST=emerge-herobrine coreboot Change-Id: I8972424f0c5d082165c185ab52a638e8b134064c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-11-08/: Remove unused <inttypes.h>Elyes Haouas
Change-Id: I16aa756039973e164c887ff5237bda69d042a235 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04lib/coreboot_table: Rename lb_fill_pcieArthur Heymans
By convention 'fill_lb_xxx' is used. Change-Id: I046016b3898308bb56b4ad6a5834ab942fdd50f2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69183 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-04lib/coreboot_table: Simplify API to set up lb_serialArthur Heymans
Instead of having callbacks into serial console code to set up the coreboot table have the coreboot table code call IP specific code to get serial information. This makes it easier to reuse the information as the return value can be used in a different context (e.g. when filling in a FDT). This also removes boilerplate code to set up lb_console entries by setting entry based on the type in struct lb_uart. Change-Id: I6c08a88fb5fc035eb28d0becf19471c709c8043d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-10-12Revert "soc/qualcomm: Update the wait time for checking PCIe link up"Shelley Chen
This reverts commit 4b5ba9436373d1addab13cd38ee6899e49ea029f. Reason for revert: This optimization is causing the non-serial enabled tot BIOS to not boot. To get tot back into good shape, will revert for now and reevalute this fix and resubmit at a later time. BUG=b:218406702 BRANCH=None TEST=reboot from AP console (on herobrine) after flashing image-herobrine.bin. prior to fix the device would never boot to login prompt. after rever the device would boot to login prompt again. Change-Id: Iaac5f2fb2120f6aa41a0ce9a763d50fd7b9a3ec7 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2022-10-06soc/qualcomm: Update the wait time for checking PCIe link upShelley Chen
Currently, after the PCIe link is initialized, we wait 100ms every time the link is not up anymore. However, this causes significant delay. Assuming the first check is false, we'd like to increase the frequency of checks for the link to be up. Changing to check every 10ms instead. This seems to save about 90ms in the device configuration stage of bootup on herobrine. BUG=b:218406702 BRANCH=None TEST=reboot from AP console (on herobrine) prior to fix (from cbmem dump): 40:device configuration 919,391 (202,861) after fix (from cbmem dump): 40:device configuration 826,294 (112,729) Change-Id: Ic67e7207c1e9f589b34705dc24f5d1ea423e2d56 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com> Reviewed-by: mturney mturney <quic_mturney@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2022-09-27sc7180: Update correct path of reset.h header fileVenkat Thogaru
Updated reset.h header file path and sorted alphabetically BUG=b:236990316 TEST=Validated on qualcomm sc7180 development board. Signed-off-by: Venkat Thogaru <quic_thogaru@quicinc.com> Change-Id: Ibf92df160a6f8ba588310508812a5601e68a887e Reviewed-on: https://review.coreboot.org/c/coreboot/+/67835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Shelley Chen <shchen@google.com>
2022-09-13sc7180: Fix DDR training failure during warm reset with OTAVenkat Thogaru
Problem: OTA is triggering warmboot, where DDR is in self-refresh mode. Due to which DDR training is not going well. Change: Verify reboot type in case of OTA. If it is warmboot, will force for cold boot inorder to trigger DDR training BUG=b:236990316 TEST=Validated on qualcomm sc7180 development board. Test observation: Cold boot is triggered forcefully, if current reboot is warmboot in case of OTA Signed-off-by: Venkat Thogaru <quic_thogaru@quicinc.com> Change-Id: I908370662292d9f768d1ac89452775178e07fc78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67406 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-08-01soc/qualcomm: Fill coreboot table with PCIe infoVeerabhadrarao Badiganti
In order to pass PCIe base address to payloads, implement pcie_fill_lb() to fill coreboot table with PCIe info. BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe endpoint (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: I1ca2be55b98c8d1b86576072078cdda02ac55940 Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57614 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-07-31soc/qualcomm: Add PCIe supportPrasad Malisetty
Add PCIe platform driver for Qualcomm platforms. Reference: - linux/drivers/pci/controller/dwc/pcie-qcom.c - Linux driver base commit: 82a823833f4e3769e82cdb4df1bc2234bc65b16c BUG=b:182963902,b:216686574,b:181098581 TEST=Verified on Qualcomm sc7280 development board with NVMe card (Koixa NVMe, Model-KBG40ZPZ256G with FW AEGA0102). Confirmed NVMe is getting detected in response to 'storage init' command in depthcharge CLI prompt. Output logs: ->dpch: storage init Initializing NVMe controller 1e0f:0001 Identified NVMe model KBG40ZPZ256G TOSHIBA MEMORY Added NVMe drive "NVMe Namespace 1" lbasize:512, count:0x1dcf32b0 * 0: NVMe Namespace 1 1 devices total Also verified NVMe boot path, that is depthcharge is able to load the kernel image from NVMe storage. Change-Id: Iccf60aa56541f5230fa9c3f821d7709615c36631 Signed-off-by: Prasad Malisetty <quic_pmaliset@quicinc.com> Signed-off-by: Veerabhadrarao Badiganti <quic_vbadigan@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/53902 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-07-04soc/qualcomm/sc7180: Update hardware watchdog loggingKshitiz Godara
Move watchdog functionality to common folder. BUG=b:221393157 TEST=None Signed-off-by: Kshitiz Godara <quic_kgodara@quicinc.com> Change-Id: Ib2f7f21ce991fd8193329e7b8260e58e47bf39c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-06-27soc/qualcomm: Make sc7180 mdss configurations common codeVinod Polimera
This change makes mdss configuration common for both sc7180 & sc7280 to avoid code duplicacy. Changes in v2: - Move soc related mdss changes to soc specific disp.c BUG=b:182963902,b:216687885 TEST=Validated on qualcomm sc7280 development board. Monitor name: LQ140M1JW49 Change-Id: Ibc43ab6ee5ced08e34625e1485febd2f4717d6a0 Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-06-01qclib common code clean up changesSudheer Kumar Amrabadi
BUG=b:227946776 TEST=Validated on sc7180 and sc7280 hardware Signed-off-by: Sudheer Kumar Amrabadi <quic_samrabad@quicinc.com> Change-Id: I211e132d1728cf14bdd201b71618af89b339cbc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64245 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-05-31soc/qualcomm: Increase SPI frequency to 75 MHzShelley Chen
Increase frequency of sc7280 to 75 MHz. Setting the delay to 1/8 of a cycle as a result of experimentation. BUG=b:190231148 BRANCH=None TEST=Make sure that herobrine board boots HW Engineer measured SPI frequency and verified running at 75 MHz Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I3cf5a7c85f12800a11ece397a354349f2a0a235f Reviewed-on: https://review.coreboot.org/c/coreboot/+/64673 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-05-31soc/qualcomm: Replace <cbfs.h> with <program_loading.h>Elyes HAOUAS
Change-Id: I0cd9960be80330b0b0bf476213bdc242db647e98 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@tutanota.com>
2022-05-20CBMEM: Change declarations for initialization hooksKyösti Mälkki
There are efforts to have bootflows that do not follow a traditional bootblock-romstage-postcar-ramstage model. As part of that CBMEM initialisation hooks will need to move from romstage to bootblock. The interface towards platforms and drivers will change to use one of CBMEM_CREATION_HOOK() or CBMEM_READY_HOOK(). Former will only be called in the first stage with CBMEM available. Change-Id: Ie24bf4e818ca69f539196c3a814f3c52d4103d7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-14soc/qualcomm/common: Make clock_configure() check for exact matchesShelley Chen
Previously, clock_configure() will configure the clocks to round up to the next highest frequency bin. This seems non-intuitive. Changing the logic to find an exact frequency match and will halt booting if no match is found. Recently fixed a bug in CB:63311, where the clock was being set incorrectly for emmc and was able to find it because of this stricter check. BUG=b:198627043 BRANCH=None TEST=build herobrine image and try to set SPI frequency to number not supported. Ensure device doesn't boot. Change-Id: I9cfad7236241f4d03ff1a56683654649658b68fc Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2022-04-13soc/qualcomm/common: Fix mem_chip_info bugs in QcLib glueRavi Kumar Bokka
This patch fixes an issue introduced by CB:59195 when QcLib doesn't return a mem_chip_info structure to coreboot, and solves some other minor leftover issues from that patch. BUG=b:182963902,b:177917361 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I0d59669adaf287d0eb7b58ccb0fe3f98e3d23281 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-01soc/qualcomm/common: Increase SPI gpios drive strength to 8mAShelley Chen
EE requested that we increase the drive strength for the SPI lines to 8mA. BUG=b:198627043 BRANCH=None TEST=EE help verify Change-Id: Ic887a7eef74f1063f7284db042c5fbd2e1d5bd4c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-27src: Remove unused <bootmode.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <bootmode.h>' -- src/) <(git grep -l 'platform_is_resuming\|gfx_set_init_done\|gfx_get_init_done\|display_init_required\|get_ec_is_trusted\|get_lid_switch\|get_wipeout_mode_switch\|clear_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_recovery_mode_retrain_switch\|get_recovery_mode_switch\|get_write_protect_state\|init_bootmode_straps' -- src/) |grep "<" Change-Id: I2ebd472e0cfc641bd7e465b8d29272fd2f7520a1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-03-16soc/qualcomm/common: Add dram information to CBMEM tableRavi Kumar Bokka
BUG=b:182963902,b:177917361 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I0f1dd05ee224bf8284661c0afaa01d0a9d71daa7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-03-15i2c: Add configurable I2C transfer timeoutJes Klinke
This patch introduces CONFIG_I2C_TRANSFER_TIMEOUT_US, which controls how long to wait for an I2C devices to produce/accept all the data bytes in a single transfer. (The device can delay transfer by stretching the clock of the ack bit.) The default value of this new setting is 500ms. Existing code had timeouts anywhere from tens of milliseconds to a full second beween various drivers. Drivers can still have their own shorter timeouts for setup/communication with the I2C host controller (as opposed to transactions with I2C devices on the bus.) In general, the timeout is not meant to be reached except in situations where there is already serious problem with the boot, and serves to make sure that some useful diagnostic output is produced on the console. Change-Id: I6423122f32aad1dbcee0bfe240cdaa8cb512791f Signed-off-by: Jes B. Klinke <jbk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-02-07treewide: Remove "ERROR: "/"WARN: " prefixes from log messagesJulius Werner
Now that the console system itself will clearly differentiate loglevels, it is no longer necessary to explicitly add "ERROR: " in front of every BIOS_ERR message to help it stand out more (and allow automated tooling to grep for it). Removing all these extra .rodata characters should save us a nice little amount of binary size. This patch was created by running find src/ -type f -exec perl -0777 -pi -e 's/printk\(\s*BIOS_ERR,\s*"ERROR: /printk\(BIOS_ERR, "/gi' '{}' ';' and doing some cursory review/cleanup on the result. Then doing the same thing for BIOS_WARN with 's/printk\(\s*BIOS_WARNING,\s*"WARN(ING)?: /printk\(BIOS_WARNING, "/gi' Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I3d0573acb23d2df53db6813cb1a5fc31b5357db8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lance Zhao Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-01-28sc7280: Add Modem region to avoid modem cleanup in Secboot rebootT Michael Turney
Modem uses different memory regions based on LTE/WiFi. This adds correct carve-out to prevent region being disturbed. BUG=b:182963902 TEST=Validated on qualcomm sc7280 developement board Signed-off-by: T Michael Turney <quic_mturney@quicinc.com> Change-Id: I56bfb210606b08893ff71dd1b6679f1ec102ec95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-11-29soc/qualcomm/common/usb: Add support for common USB driverSandeep Maheswaram
Add common USB driver for qualcomm soc sc7180 and sc7280. This includes dwc3 controller, qmp ss phy, qusb hs phy and snsp hs phy. BUG=b:182963902 TEST=Validated USB enumeration on qcom sc7180 and sc7280 development board Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Change-Id: I1013ded22855286220cfa747cb25418070fe85a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-16qualcomm/sc7280: gpio: Support eGPIO schemeTaniya Das
eGPIO is a scheme which allows special power island domain IOs to be reused as regular chip GPIOs by muxing regular TLMM functions with Island Domain functions. Allow the eGPIO to be configured via gpio_configure API to be used as a TLMM gpio. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Change-Id: Ib2598a41ba3bb8a8a2acff8253b5bb78633f89f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-11-15sc7280: Add CPUCP firmware supportRavi Kumar Bokka
CPUCP is CPUSS Control Processor. It refers to the firmware for control CPUSS active power management. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: Idac22c8cb231658616999bc577bdf49f9aa7ae74 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-10-25soc/qualcomm: Commonize AOP firmware supportRavi Kumar Bokka
Move AOP firmware support from qualcomm/sc7180 into qualcomm/common BUG=b:182963902 TEST=Validated on qualcomm sc7180 development board Change-Id: I90b0f48e15df390970e027bff2065b7a89b14cec Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-10-07sc7280: Add SHRM firmware supportRavi Kumar Bokka
SHRM is a system hardware resource manager. It is used to manage run time DDRSS activities. DDRSS stands for DDR subsystem. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board by trying DDR clocks which through SHRM RSI command. Change-Id: I44484573a829eaefbd34907c6fe78d427506a762 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-23soc/qualcomm/common: Move UART SC7180 driver to common sectionRajesh Patil
Move existing UART driver from sc7180 to common folder. This implements UART driver for QCOM SoC's BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I7bc2d3765f956e04bae3e45c3a9b9e2ad424c7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-21soc/qualcomm/common/spi: Configure SPI QUP driverRavi Kumar Bokka
This implements the SPI driver for the QUP core. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I7e5d3ad07f68255727958d53e6919944d3038260 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56399 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-21soc/qualcomm/common/spi: Add support for SPI common driverRavi Kumar Bokka
This implements qup spi driver for qualcomm chipsets Rename header file names for trogdor to prevent breakage. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I2f2b25b6661fcd518f70383da0c7788c5269c97b Reviewed-on: https://review.coreboot.org/c/coreboot/+/55953 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-21soc/qualcomm/common/i2c: Add support for I2C common driverRajesh Patil
copy existing I2C driver from /soc/qualcomm/sc7180 to common folder. This implements i2c driver for qualcomm chipsets BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I16e6fc2c1c24b9814d1803bffd5cfbb657201cfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/55952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-16soc/qualcomm/common/qup: Add support for QUP common driverRavi Kumar Bokka
copy existing QUP driver from /soc/qualcomm/sc7180 to common folder. This QUP common driver provide QUP configurations, GPI and SE firmware loading and initializations. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I95a0fcf97b3b3a6ed26e62b3084feb4a2369cdc9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-03soc/qualcomm/common/qspi: Add support for common QSPI driverRavi Kumar Bokka
copy existing QSPI driver from /soc/qualcomm/sc7180 to common folder. This common QSPI driver works in master mode and provides read/write operation for the slave devices like flash. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Change-Id: I5b3816b823e14db1dd13f1eb4a6761c7a61604b9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-09-03qualcomm/sc7280: Move to use common clock driver for sc7280Taniya Das
It supports the clock consumers for QUP, SDCC, PCIE, Display to be able to configure & enable the desired clocks. The clock driver also supports reset of subsystems like AOP and SHRM. Also add support for Zonda PLL enable for CPU in common clock driver. Refactor the SC7280 clock driver to use the common clock driver APIs. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: I590a93cda0d6eccb51b54692b620d43ccacede77 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50580 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-03soc/qualcomm/common: clock: Add support for common clock driverTaniya Das
The clock driver supports configuring the general purpose PLLs, configuring the root clock generator (RCG), enable clock branch, enable gdsc and also the block resets. The common clock driver exposes PLL configuration functions and also different Agera PLL enable functions for the CPU PLLs. While at it, the common driver also supports reset of subsystems like AOP and SHRM. SC7180 clock driver is also refactored to use the common clock driver APIs. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board. Change-Id: I03d1b4a2fb90303c7259ec08f312d78b4e33ec39 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-07-22soc/qualcomm: move uart_bitbang UART w/gpio code to commonRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: Ic6c70f917a59e233f6ea518d9c39f73fe84991c3 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47284 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-21soc/qualcomm/common/gpio: Define a macro for the gpio offsetTaniya Das
Defining a macro for the gpio offset instead of a constant value. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Taniya Das <tdas@codeaurora.org> Change-Id: Iefdde8f8331cf1df2e88a2c8915aefb4fa091d65 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55948 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-06-04soc: common: gpio: Add support for common GPIO driverTaniya Das
Add common gpio functionalities across qualcomm soc targets. This common gpio driver would allow the consumers to be able to configure gpio function, set/get gpio direction as input/output, configure the gpio as pull-up/pull-down, configure the gpio as an IRQ and also query the gpio irq status. The GPIO pin definition would be SoC specific. BUG=b:182963902 TEST=Validated on qualcomm sc7180 and sc7280 development board Signed-off-by: Taniya Das <tdas@codeaurora.org> Change-Id: Ia672130c6ca938d9284cae5071307637709480d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55076 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-19sc7280: Reserve wlan & wpss dram memory regionsRavi Kumar Bokka
Change-Id: Ic98b5d08a0a7b3f772582bf85d94f901a7c53010 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-04-08soc/qualcomm: move code to commonRavi Kumar Bokka
This commit includes makefile cleanup to exclude common source file compilation in each stage by using all-y flag. BUG=b:182963902 TEST=trogdor validated on limozeen Change-Id: I48464567974a0729c1c6b6157bcce4fac39a8b38 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-03-16cbfs: Remove prog_locate() for stages and rmodulesJulius Werner
This patch removes the prog_locate() step for stages and rmodules. Instead, the stage and rmodule loading functions will now perform the locate step directly together with the actual loading. The long-term goal of this is to eliminate prog_locate() (and the rdev member in struct prog that it fills) completely in order to make CBFS verification code safer and its security guarantees easier to follow. prog_locate() is the main remaining use case where a raw rdev of CBFS file data "leaks" out of cbfs.c into other code, and that other code needs to manually make sure that the contents of the rdev get verified during loading. By eliminating this step and moving all code that directly deals with file data into cbfs.c, we can concentrate the code that needs to worry about file data hashing (and needs access to cbfs_private.h APIs) into one file, making it easier to keep track of and reason about. This patch is the first step of this move, later patches will do the same for SELFs and other program types. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia600e55f77c2549a00e2606f09befc1f92594a3a Reviewed-on: https://review.coreboot.org/c/coreboot/+/49335 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-15sc7180: make symbols common accross multiple targets.Ravi Kumar Bokka
making the symbols common accross targets to avoid duplicates for each soc. Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: Ic60f46891dfadc7db5ece02756cb449aacdd63c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-02-03src: Remove unused <boardid.h>Elyes HAOUAS
Change-Id: I960870fabde1dacfe52a8a35c253b0bd097d3e10 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-11-02sc7180: Add Modem region in memlayout to avoid modem cleanup in Secboot reboot.mkurumel
two different modem regions wifi and lte to be handled in QC_SEC and modem Change-Id: Ib4592ca66d3d0db4c4768be4cd27422fe9f786b8 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46661 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-10-23sc7180: enable RECOVERY_MRC_CACHEShelley Chen
Enable caching of memory training data for recovery as well as normal mode because memory training is taking too long in recovery as well. This required creating a space in the fmap for RECOVERY_MRC_CACHE. BUG=b:150502246 BRANCH=None TEST=Run power_state:rec twice on lazor. Ensure that on first boot, memory training occurs and on second boot, memory training is skipped. Change-Id: Id9059a8edd7527b0fe6cdc0447920d5ecbdf296e Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46651 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-09trogdor: Modify DDR training to use mrc_cacheShelley Chen
Currently, trogdor devices have a section RO_DDR_TRAINING that is used to store memory training data. Changing so that we reuse the same mrc_cache API as x86 platforms. This requires renaming RW_DDR_TRAINING to RW_MRC_CACHE and removing RO_DDR_TRAINING in the fmap table. BUG=b:150502246 BRANCH=None TEST=FW_NAME="lazor" emerge-trogdor coreboot chromeos-bootimage Make sure that first boot after flashing does memory training and next boot does not. Boot into recovery two consecutive times and make sure memory training occurs on both boots. Change-Id: I16d429119563707123d538738348c7c4985b7b52 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-11trogdor: QCSDI loading depends on VB2_GBB_FLAG_RUNNING_FAFT setting flagAshwin Kumar
Change-Id: I63f35c94bc6c60934ace5fe0fd9176443059b354 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36518 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06treewide: replace GPLv2 long form headers with SPDX headerPatrick Georgi
This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06treewide: Move "is part of the coreboot project" line in its own commentPatrick Georgi
That makes it easier to identify "license only" headers (because they are now license only) Script line used for that: perl -i -p0e 's|/\*.*\n.*This file is part of the coreboot project.*\n.*\*|/* This file is part of the coreboot project. */\n/*|' # ...filelist... Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-18soc: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-07-02QC common: fix compiler complaint, missing <string.h>T Michael Turney
Change-Id: I5b5b7bc61dd82fb1b866857d60926b057fae3715 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33445 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28qualcomm: qclib: Ensure interface table entry name is terminatedJulius Werner
This string is printed in dump_te_table() so we should make sure it's properly null-terminated. This fixes Coverity issue 1401305. Change-Id: I45827f552c2d8a4e01b50a699ac88ee457043282 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-17soc/qualcomm/sdm845: Fix broken KconfigPatrick Rudolph
This fixes the following changes, which made qualcomm Kconfig appear on all platforms: bd0b51c0be1ec2c9a5f02de3c13108c13941e2c2 7a3e46d767890f502b09771e19decc5033e27079 Use proper Kconfig logic. Change-Id: I0195fd186ac39dd4258fe0781dd6d3d1b1d1679f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32805 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-16soc/qualcomm/common: replace IS_ENABLED(CONFIG_*) with CONFIG()Patrick Georgi
That's how we do it these days. Change-Id: I1c088d23dff709bcdcb21310059e6a2aab84c0be Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-02qualcomm: Add QCLib interface support to common/T Michael Turney
Change-Id: I38d086c379a3c2f54d1603a2fed5b33860f7f4d7 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 13:04:25 +0000