summaryrefslogtreecommitdiff
path: root/src/soc/mediatek
AgeCommit message (Collapse)Author
2020-10-20soc/mediatek/mt8192: Do dram fast calibrationHuayang Duan
Load params from flash and use those params to do dram fast calibration. Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: I45a4fedc623aecfd000c5860e0e85175f45b8ded Reviewed-on: https://review.coreboot.org/c/coreboot/+/44569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-12soc/mediatek/mt8192: Refactor USB code among similar SoCsZhanyong Wang
Adjust ssusb register layout and offset accroding mt8192 Soc then refactor USB code which will be reused among similar SoCs Signed-off-by: Tianping Fang <tianping.fang@mediatek.com> Signed-off-by: Zhanyong Wang <zhanyong.wang@mediatek.com> Change-Id: Icb4cc304654b5fb7cf20b96ab83a22663bfeab63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-10-09soc/mediatek: Add function to measure clock frequency of MT8192Weiyi Lu
Implement mt_fmeter_get_freq_khz() in MT8192 to measure frequency of some pre-defined clocks by frequency meter. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I75df0b040ed7ea73d25724a3c80040f4e731118f Reviewed-on: https://review.coreboot.org/c/coreboot/+/45402 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-08soc/mediatek: Add function to raise the CPU frequency of MT8192Weiyi Lu
Rename all mt_pll_raise_ca53_freq() into mt_pll_raise_little_cpu_freq(). Implement mt_pll_raise_little_cpu_freq() in MT8192. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: I97d9a61f39f2eb27f0c6f911a9199bf0eaae4fbe Reviewed-on: https://review.coreboot.org/c/coreboot/+/45401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-25soc/mediatek/mt8183: Enable CA perbit mechanismHuayang Duan
LPDDR4x has 6 CA PINs, but for some 8GB LPDDR4X DDR, the left margin of some CA PIN window is too small than others. Need to enable the CA perbit mechanism to avoid those risks. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I58e29d0c91a469112b0b1292da80bcb802322d47 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41965 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-17soc/mediatek/mt8192: Init PLL in bootblockCK Hu
Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: If16d244e07d9f369efd991132587a92e38200b45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-17soc/mediatek/mt8192: Add mtcmos init supportWeiyi Lu
Using common mtcmos code to power on audio and display modules in SOC. TEST=Boots correctly on MT8192EVB. Passes the status check at the end of mtcmos_power_on() Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Ie7bff831eecfc2b4d315a577f6ff86befc483eab Reviewed-on: https://review.coreboot.org/c/coreboot/+/45394 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-16soc/mediatek: move power status bits under each chipWeiyi Lu
The power status bits of display and audio of MT8192 are different from the bits of MT8173 & MT8183, so move those under each chip. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Iaa211b8db733d8aa52d93af9e507042bf0984d55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-09-12include/console/uart: make index parameter unsignedFelix Held
The UART index is never negative, so make it unsigned and drop the checks for the index to be non-negative. Change-Id: I64bd60bd2a3b82552cb3ac6524792b9ac6c09a94 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-09-10soc/mediatek: Drop unneeded empty linesElyes HAOUAS
Change-Id: Ia419de14614a7a1b583e0870e9ca2fcdc8cf815a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-09-08soc/mediatek/mt8192: Add SPI flash controller dual read functionCK Hu
Support SPI flash dual read funciton which change spi mode (1-1-1) to dual mode (1-1-2). Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Iabd3668fc4bc42137b7743144fc1cced4fe72737 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44852 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-08soc/mediatek/mt8192: Add SPI flash controller DMA read functionCK Hu
To speed up SPI flash read, enable DMA read function. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Ic1679ef7940258350feeadac50ad8ea407fd7b90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-09-01{include,mb,soc,sb,vendorcode}: Make hexadecimal notation consistentSubrata Banik
Convert 0X -> 0x Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Iea3ca67908135d0e85083a05bad2ea176ca34095 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-28soc/mediatek/mt8192: Use SPI-NOR as flash controllerCK Hu
Add a SPI-NOR flash controller which supports pio mode. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I1e38672a532dd8234b3ef24c84113888c8795810 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-26soc/mediatek: Include addressmap.h in gpio_common.hCK Hu
The gpio_common.h needs EINT_BASE from addressmap.h. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I20834e38343410526da0a489fed907acbf479d02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-25soc/mediatek/mt8192: Add dramc param structHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I3bae57e6777ab6fc46c771a034f814dd1175be95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-18src: Remove unused 'include <delay.h>'Elyes HAOUAS
Change-Id: I6afea5c102299e570378a1656d3dcd329a373399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44093 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-17soc/mediatek/mt8192: Initialize watch dog in bootblockCK Hu
Initialize watch dog so the system won't reboot on timeout. In addition, print the reason of reboot triggered by watch dog. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I7e849659700218f1c50365c2d68a32be2f703d94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-17soc/mediatek/mt8192: Initialize mmu in bootblockCK Hu
Initialize CPU mmu and config range. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I5ba405dab87d51d373704657ccb44c07c7249041 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-13soc/mediatek/mt8192: Add spi driverQii Wang
Add driver for MT8192 SPI controller TEST=Boots correctly on MT8192EVB Signed-off-by: Qii Wang <qii.wang@mediatek.com> Change-Id: I2094dd2f14ad19b7dbd66a8e694cc71d654a2b4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-08-13soc/mediatek/mt8192: Add DRAM resource in ramstageCK Hu
Add DRAM resource in ramstage to load payload. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: Iac02f81fc7d47851b3bba442eb7043169fbdbcfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/44410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-13soc/mediatek/mt8192: Initialize build rulesCK Hu
The first Makefile to support building minimal stage files for MT8192 SOC. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I2cf68805532f70f072b4e9a21ee61e2ebe4ebd9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43962 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-13soc/mediatek/mt8192: Add a placeholder for the EMI driverCK Hu
Add minimal function to report SDRAM size. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: If74b6b52dd6e91d1ff40cf8460b6a03b2f3bb6f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43961 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12soc/mediatek/mt8192: Add PLL and clock init supportWeiyi Lu
Add PLL and clock init code. TEST=Boots correctly on MT8192EVB. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Ia49342c058577e8e107b7e56c867bf21532e40d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-12soc/mediatek/mt8192: Add gpio driverCK Hu
Add MT8192 GPIO driver. Signed-off-by: Po Xu <jg_poxu@mediatek.com> Change-Id: I4b230aebc9eb4ca1bbf444c3a2f30159d707f37b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43959 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-12soc/mediatek/mt8183: Transfer ddr geometry type to dram blobHuayang Duan
BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I3a677195f5036321939c60c8f9f1bace7c4a2e3f Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-08soc/mediatek/mt8192: Add initial config for new ARMv8 device MT8192CK Hu
Add MT8192 address map, memlayout and first Kconfig. MT8192 is similar to MT8183. Signed-off-by: CK Hu <ck.hu@mediatek.com> Change-Id: I4e34c03a11a77ed98674ffd8eeddb20ef5fea89d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43957 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06soc/mediatek/mt8183: Set MMU default map length to 8GB befor mem initHuayang Duan
BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I072745933fe141cac26afd044836a564e345d036 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43795 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-06soc/mediatek/mt8183: Add ddr geometry to support 6GB, 8GB DDR bootupHuayang Duan
Currently the DRAM initialization code can only work on 4GB size and want to support larger memory sizes in future, so add geometry information to the DRAM calibration parameters. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I1fdf50b75c6a552c0a889f21e1a81ab4b9a305fa Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-06soc/mediatek/mt8183: Adjust tRFCab and tRFCpb by the density valueHuayang Duan
Different density should correspond to different tRFCab and tRFCpb timing. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I2599fcd620cdefe2e12480932ffd75e0416b9545 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-08-06soc/mediatek/mt8183: Add missing register settings for channelsHuayang Duan
Some DRAM control settings need to apply to all channels, so add those missing settings. Also fix a typo (0x1 < 0) to (0x1 << 0). BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I35e25c922ed45216d5f04835abcd10809a8d559a Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-08-03Change all assert(0) to BUG()Julius Werner
I would like to make assertions evaluate at compile time where possible, but sometimes people used a literal assert(0) to force an assertion in a certain code path. We already have BUG() for that so let's just replace those instances with that. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I674e5f8ec7f5fe8b92b1c7c95d9f9202d422ce32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/soc/mediatek: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I8e4a7af68a52d82117b8b091fa448bb6ad40ae7d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-14src: Remove unused 'include <stdint.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<' Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-13treewide: Add Kconfig variable MEMLAYOUT_LD_FILEFurquan Shaikh
This change defines a Kconfig variable MEMLAYOUT_LD_FILE which allows SoC/mainboard to provide a linker file for the platform. x86 already provides a default memlayout.ld under src/arch/x86. With this new Kconfig variable, it is possible for the SoC/mainboard code for x86 to provide a custom linker file as well. Makefile.inc is updated for all architectures to use this new Kconfig variable instead of assuming memlayout.ld files under a certain path. All non-x86 boards used memlayout.ld under mainboard directory. However, a lot of these boards were simply including the memlayout from SoC. So, this change also updates these mainboards and SoCs to define the Kconfig as required. BUG=b:155322763 TEST=Verified that abuild with --timeless option results in the same coreboot.rom image for all boards. Change-Id: I6a7f96643ed0519c93967ea2c3bcd881a5d6a4d6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42292 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02src: Remove redundant includesElyes HAOUAS
<types.h> is supposed to provide <commonlib/bsd/cb_err.h>, <stdbool.h>,<stdint.h> and <stddef.h>. So remove those includes each time when <types.h> is included. Change-Id: I886f02255099f3005852a2e6095b21ca86a940ed Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-02src: Remove duplicated includesElyes HAOUAS
Change-Id: If8c7e26ebd954b19bfb8766b26570c6865ad255e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41676 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02src: Remove unused 'include <symbols.h>'Elyes HAOUAS
Change-Id: Ica355292eeda9c386b49db97f021566d52943d40 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41673 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02src: Remove unused '#include <timer.h>'Elyes HAOUAS
Change-Id: I57e064d26b215743a1cb06bb6605fc4fe1160876 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41491 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-20soc/mediatek/mt8183: Set CA and DQ vref range to correct valueHuayang Duan
The CA vref should alway select range[1]. But in fast calibration flow, we missed the range selection and caused the CA vref to use the range[0] value. The DQ vref should select correct range that corresponds to current frequency, that is for 1600Mbps, 2400Mbps to select range[1], for 3200Mbps and 3600Mbps to select range[0]. Refer to the 'JESD209-4 - Low Power Double Data Rate 4X(LPDDR4X).pdf', used MR12 to set Vref(CA) levels, used MR14 to set VREF(DQ) levels. MR12 range[0] values from 15.0% to 44.9%, range[1] values from 32.9% to 62.9%, MR14 range[0] and range[1] values same as MR12. BUG=b:153614919 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Ie7680b1bf0c29c946d18e3b27626ce6f31c4216b Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40525 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18soc/mediatek: dsi: adjust hfp_byte and hbp_byte if too smallPaul Ma
If panel has too small hfp or hbp, hfp_byte or hbp_byte may become very small value or negative value. When very small value or negative value is used, the panel will be scrolling or distorted. This patch adjusts their values so that they are greater than the minimum value and keep total of them unchanged. DSI transfer HBP or HFP, There are some extra packet. ex. packet header(4byte) and eof(2byte) and (next)hs packet header(4 byte). the hfp_byte = HFP * BPP - packet header(4byte) and eof(2byte) and (next)hs packet header(4 byte). So the min hfp_byte is 2 when HFP = 4. This is equivalent to the Linux kernel DSI change in: https://chromium-review.googlesource.com/c/chromiumos/third_party/ kernel/+/2186872 BUG=b:144824303 BRANCH=kukui TEST=boot damu board with panel CMN N120ACA-EA1 (12" panel and its hbp only 6), the panel can display without scrolling or distortions. Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com> Change-Id: I608c01d41ae93c8d5094647bbf3e0ae4a23d814c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41163 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src/mainboard: Remove unused 'include <stdlib.h>'Elyes HAOUAS
Found using following commande: diff <(git grep -l '#include <stdlib.h>' -- src/) <(git grep -l ' memalign\|malloc\|free' -- src/) |grep -v vendorcode |grep '<' Change-Id: Ib2ee840a10de5c10d57aa7a75b805ef69dc8da84 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41241 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13src: Remove unused '#include <stddef.h>'Elyes HAOUAS
Unused includes found using following commande: diff <(git grep -l '#include <stddef.h>' -- src/) <(git grep -l 'size_t\|ssize_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\ |MAYBE_STATIC_NONZERO\|MAYBE_STATIC_BSS\|zeroptr' -- src/)|grep '<' |grep -v vendor |grep -vF '.h' Change-Id: Ic54b1db995fe7c61b416fa5e1c4022238e4a6ad5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41150 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-13soc/mediatek: improve ca53 frequency change procedureWeiyi Lu
To change frequency, the SOC PLL team suggests procedure below: First, we need to enable the intermediate clock and switch the ca53 clock source to the intermediate clock. Second, disable the armpll_ll clock output. Third, raise armpll_ll frequency and enable the clock output. The last, switch the ca53 clock source back to armpll_ll and disable the intermediate clock. BUG=b:154451241 BRANCH=jacuzzi TEST=Boots correctly on Jacuzzi. Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Change-Id: Ib9556ba340da272fb62588f45851c93373cfa919 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41077 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06treewide: replace GPLv2 long form headers with SPDX headerPatrick Georgi
This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.*of.*the.*License.*or.*(at.*your.*option).*any.*later.*version.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-or-later */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*as.*published.*by.*the.*Free.*Software.*Foundation[;,].*version.*2.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This program is free software[:;].*you.*can.*redistribute.*it.*and/or.*modify.*it.*under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation[.;,].+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) perl -i -p0e 's|/\*[*\n\t ]*This software is licensed under.*the.*terms.*of.*the.*GNU.*General.*Public.*License.*version.*2.*as.*published.*by.*the.*Free.*Software.*Foundation,.+This.*program.*is.*distributed.*in.*the.*hope.*that.*it.*will.*be.*useful,.*but.*;.*without.*even.*the.*implied.*warranty.*of.*MERCHANTABILITY.*or.*FITNESS.*FOR.*A.*PARTICULAR.*PURPOSE..*.*See.*the.*GNU.*General.*Public.*License for more details.[\n\t ]*\*/|/* SPDX-License-Identifier: GPL-2.0-only */|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-04-30Revert "soc/mediatek/mt8183: Force retraining memory if requested"Julius Werner
This reverts commit 285975dbba8c7f3bbb9f9950e79a30bb983d5123. Reason for revert: VB2_RECOVERY_TRAIN_AND_REBOOT was never meant to have any special effect on memory training behavior. It was just supposed to be a "reboot automatically after reaching kernel verification" recovery reason. On x86 devices this was used to prime the separate recovery MRC cache in the factory (make sure it is initialized before shipping). This isn't used on Kukui anyway, but in order to make sure nobody copies this code and keep the behavior consistent between platforms, let's remove it. Change-Id: I5df5e00526e90cb573131de3c8bac9f85f4e3a5f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40623 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-23rules.h: Rename ENV_VERSTAGE to ENV_SEPARATE_VERSTAGEJulius Werner
When CONFIG_SEPARATE_VERSTAGE=n, all verstage code gets linked into the appropriate calling stage (bootblock or romstage). This means that ENV_VERSTAGE is actually 0, and instead ENV_BOOTBLOCK or ENV_ROMSTAGE are 1. This keeps tripping up people who are just trying to write a simple "are we in verstage (i.e. wherever the vboot init logic runs)" check, e.g. for TPM init functions which may run in "verstage" or ramstage depending on whether vboot is enabled. Those checks will not work as intended for CONFIG_SEPARATE_VERSTAGE=n. This patch renames ENV_VERSTAGE to ENV_SEPARATE_VERSTAGE to try to clarify that this macro can really only be used to check whether code is running in a *separate* verstage, and clue people in that they may need to cover the linked-in verstage case as well. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I2ff3a3c3513b3db44b3cff3d93398330cd3632ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/40582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-04-05soc/mediatek: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I7c3c75eaf2d7a64e7d833541bcf168b93921a142 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-31security/vboot: Decouple measured boot from verified bootBill XIE
Currently, those who want to use measured boot implemented within vboot should enable verified boot first, along with sections such as GBB and RW slots defined with manually written fmd files, even if they do not actually want to verify anything. As discussed in CB:34977, measured boot should be decoupled from verified boot and make them two fully independent options. Crypto routines necessary for measurement could be reused, and TPM and CRTM init should be done somewhere other than vboot_logic_executed() if verified boot is not enabled. In this revision, only TCPA log is initialized during bootblock. Before TPM gets set up, digests are not measured into tpm immediately, but cached in TCPA log, and measured into determined PCRs right after TPM is up. This change allows those who do not want to use the verified boot scheme implemented by vboot as well as its requirement of a more complex partition scheme designed for chromeos to make use of the measured boot functionality implemented within vboot library to measure the boot process. TODO: Measure MRC Cache somewhere, as MRC Cache has never resided in CBFS any more, so it cannot be covered by tspi_measure_cbfs_hook(). Change-Id: I1fb376b4a8b98baffaee4d574937797bba1f8aee Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-03-18soc/mediatek/mt8183: Fix wrong setting of DRS configHuayang Duan
Update setting of DRS config. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Id38fc224b54c3947af8bbc5c1a4a8d70eb53d5fb Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-03-18soc/mediatek/mt8183: Improve the AC timing of DRAMCHuayang Duan
Set more AC timing items to make the system more stable. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Ibd003582a3ffab1ae91f6378651c2c9e585c4676 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-03-18soc: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-12vboot: remove extraneous vboot_recovery_mode_memory_retrainJoel Kitching
Just call get_recovery_mode_retrain_switch() directly. BUG=b:124141368 TEST=make clean && make test-abuild BRANCH=none Change-Id: Icb88d6862db1782e0218276984e527638b21fd3a Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-06soc/mediatek/mt8183: Improve the DRAMC runtime config flowHuayang Duan
Move channel loop at the top level to deduplicate the logic. BUG=none BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Iea623d1bd1f7d736e81f66f191a1bf8476d30404 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-03-06soc/mediatek/mt8183: Do TX tracking for DRAM DVFS featureHuayang Duan
The TX window will offset to edge during DVFS switch, which may cause TX data transmission error and random kernel crash. Therefore, use the standard dqsosc (DQS Oscillator) for TX window tracking. BUG=b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Idcf9213a488e795df3faf64b03588cfe55cb2f81 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-03-06soc/mediatek/mt8183: Correct EMI bandwidth threshold for DVFS switchHuayang Duan
Because eMCP and discrete DDR devices have different DVFS tables, their EMI bandwidth thresholds should also be different. When the EMI total bandwidth reaches the threshold, the system will notify DVFS module to perform DVFS switch for system performance in low power states. This patch increases the threshold from 0xa to 0xd for eMCP DDR devices so that DVFS switch will be less likely to happen. The register table of EMI_BWCT0 is incorrect in the datasheet. According to the hardware design, BW_2ND_INT_BW_THR should be in bits [30:24] instead of [22:16]. However, the logic in DRAM driver is correct, aligned with the hardware design, so we don't need to correct it. BRANCH=kukui BUG=b:142358843 TEST=bootup pass Change-Id: I82c3c70bcd90df3fdd613c0353aba0f176bc82bc Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39034 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-26treewide: capitalize 'USB'Elyes HAOUAS
Change-Id: I7650786ea50465a4c2d11de948fdb81f4e509772 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39100 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-25soc/mediatek/mt8183: Fix programming error of DRAMC settingHuayang Duan
1. The ac timing of 2400Mbps should use diff params with 1600Mbps. 2. Fix the typo error of save shuffle function for DVFS. BRANCH=kukui BUG=none TEST=emerge-kukui coreboot Change-Id: I5edac32938def50836f386426e7deb652b80d42d Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-25soc/mediatek: Fix typos in commentsElyes HAOUAS
Also add missing whitespace. Change-Id: I3361122d5232072e68d018e84219a262acf34001 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39027 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2020-02-17soc/mediatek: dsi: Correct bits_per_pixel for MIPI_DSI_FMT_RGB666Yu-Ping Wu
The number of bits per pixel for MIPI_DSI_FMT_RGB666 should be 24 instead of 18. BRANCH=none BUG=none TEST=none Change-Id: I9574502b2dec4b5a042df3886922ddd8c755da1a Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jitao Shi <jitao.shi@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-17soc/mediatek: dsi: reduce the hbp and hfp for phy timingJitao Shi
The extra data transfer in DSI, namely, lpx, hs_prepare, hs_zero, hs_exit and the sof/eof of DSI packets, will enlarge the line time, which causes the real frame on dsi bus to be lower than the one calculated by video timing. Therefore, hfp_byte is reduced by d_phy to compensate the increase in time by the extra data transfer. However, if hfp_byte is not large enough, the hsync period will be increased on DSI data, leading to display scrolling in firmware screen. To avoid this situation, this patch changes the DSI Tx driver to reduce both hfp_byte and hbp_byte, with the amount proportional to hfp and hbp, respectively. Refer to kernel's change in CL:1915442. Also rename 'phy_timing' to 'timing' to sync with kernel upstream. Since the phy timing initialization sequence has been corrected, the m value adjustment in the analogix driver can be removed. BUG=b:144824303 BRANCH=kukui TEST=emerge-jacuzzi coreboot TEST=Boots and sees firmware screen on krane and juniper TEST=No scrolling issue on juniper AUO and InnoLux panels Change-Id: I10a4d8a4fb41c309fa1917cf1cdf19dabed98227 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-02-17soc/mediatek: dsi: Increase pcw precisionYu-Ping Wu
When configuring MIPI DSI Tx, the value of pcw was calculated from data rate in MHz, leading to loss of precision. This patch changes to use data rate in Hz for the calculation so that the resulting value should be consistent with the one in kernel (CL:1786327). In addition, change the type of data rate to u32, and calculation of data rate from pixel clock is changed to use DIV_ROUND_UP for consistency with kernel (CL:1761843). Also remove unused variable txdiv. BRANCH=kukui BUG=b:149051882 TEST=emerge-jacuzzi coreboot TEST=No scrolling issue on Juniper AUO and InnoLux panels Change-Id: I23220d446833b956431006027bbc8cb20fc696a5 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38827 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-28drivers/spi/spi_flash: remove spi flash namesAaron Durbin
The names of each spi flash cause quite a bit of bloat in the text size of each stage/program. Remove the name entirely from spi flash in order to reduce overhead. In order to pack space as closely as possible the previous 32-bit id and mask were split into 2 16-bit ids and masks. On Chrome OS build of Aleena there's a savings of >2.21KiB in each of verstage, romstage, and ramstage. Change-Id: Ie98f7e1c7d116c5d7b4bf78605f62fee89dee0a5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-01-10soc/mediatek/mt8183: Restore vcore after DRAM calibrationHuayang Duan
DRAM calibration sets vcore to different voltages at different frequencies. After DRAM calibration, vcore should be restored to the default voltage, which is 800mV for both eMCP and discrete DDR devices. BRANCH=kukui BUG=b:146618163 TEST=bootup pass Change-Id: Ia87b4ac78a32dbd4c4ab52e84d307cb46525afa1 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2019-12-20soc/mediatek/mt8183: Use DDR clock to compute Tx delay cellHuayang Duan
The delay cell result should use DDR clock PLL rate for computation, and should not be divided by 2. This helps to improve DRAM stability. BUG=b:80501386,b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: Idf5cce206e248bb327f9a7d27c4f364ef1c68aa1 Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-12-20src: Replace min/max() with MIN/MAX()Elyes HAOUAS
Change-Id: I63b95144f2022685c60a1bd6de5af3c1f059992e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37828 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19soc/{amd,cavium,mediatek,sifive}: Remove unused <stdlib.h>Elyes HAOUAS
Change-Id: I83322e246fe81b97188be17a3fdda16d36df0678 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33688 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-19src: Remove unneeded 'include <delay.h>'Elyes HAOUAS
Change-Id: Ibf91c35aa389a91116463616a778212bb386756e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34230 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12soc/mediatek/mt8183: skip fast calibration for high frequency of TX RX windowHuayang Duan
For low frequency (e.g., 1600 or 2400 Mbps) we can do fast calibration for TX and RX window. However, for high frequency (e.g., 3200 or 3600 Mbps) a full calibration is needed. BUG=b:80501386,b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I00d563ece4cf91ef5e8e12b6cf7f777849375a24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36921 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-04Change all clrsetbits_leXX() to clrsetbitsXX()Julius Werner
This patch changes all existing instances of clrsetbits_leXX() to the new endian-independent clrsetbitsXX(), after double-checking that they're all in SoC-specific code operating on CPU registers and not actually trying to make an endian conversion. This patch was created by running sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g' across the codebase and cleaning up formatting a bit. Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-11-26soc/mediatek/mt8183: disable BBLPM of DCXO coreWeiyi Lu
When we only enable XO_SOC and mask most BBLPM requests, the BBLPM HW arbiter will have DCXO core to enter Baseband Low-Power Mode(BBLPM). Under BBLPM mode, inaccurate(about 1.5KHz offset) 26MHz clocks from crystal is provided and crystal voltage will drop from 1.8V to 0.7V or lower. In order to ensure the stability by always outputting an accuarate system clock when system is running. We should disable BBLPM when only XO_SOC enabled. BRANCH=kukui TEST=accurate 26MHz provided and correct crystal voltage swing Change-Id: Iea72a964507a19735cf92e3774cd8a94c06545b2 Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37136 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-18include: Make stdbool.h a separate fileJulius Werner
This patch moves the traditional POSIX stdbool.h definitions out from stdint.h into their own file. This helps for using these definitions in commonlib code which may be compiled in different environments. For coreboot everything should chain-include this stuff via types.h anyway so nothing should change. Change-Id: Ic8d52be80b64d8e9564f3aee8975cb25e4c187f5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-16soc/mediatek/mt8183: Get more space for PreRAM memconsoleHung-Te Lin
Leave more space for PreRAM memconsole especially for seeing complete logs when doing DRAM full calibration (that outputs in 200+k to UART): - Shrink Full-K mem space (the ELF blob today needs ~132K) - Move PRERAM_CBFS_CACHE to L2C since it's no used after DRAM is up - Shrink TIMESTAMP to 1k (all other non-MTK ARM SOCs use only 1k) - Incease PRERAM_CBMEM_CONSOLE to 63k-4 - Reordered few sections to align at better locations BUG=b:144542023 TEST=emerge-kukui coreboot chromeos-bootimage; boot and see logs Change-Id: I8696fb01653c0a581cf62e687dc523cb6fed9a32 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-14lib/fmap: Add optional pre-RAM cacheJulius Werner
This patch adds an optional pre-RAM cache for the FMAP which most platforms should be able to use, complementing the recently added post-RAM FMAP cache in CBMEM. vboot systems currently read the FMAP about half a dozen times from flash in verstage, which will all be coalesced into a single read with this patch. It will also help future vboot improvements since when FMAP reads become "free" vboot doesn't need to keep track of so much information separately. In order to make sure we have a single, well-defined point where the new cache is first initialized, eliminate the build-time hardcoding of the CBFS section offsets, so that all CBFS accesses explicitly read the FMAP. Add FMAP_CACHEs to all platforms that can afford it (other than the RISC-V things where I have no idea how they work), trying to take the space from things that look like they were oversized anyway (pre-RAM consoles and CBFS caches). Change-Id: I2820436776ef620bdc4481b5cd4b6957764248ea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-11-11soc/mediatek: Add missing '#include <console/console.h>'Elyes HAOUAS
Change-Id: I2e79ff3352fe974a070b7b3f5e4b5570ed2b294c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-03arch/arm64: Pass cbmem_top to ramstage via calling argumentArthur Heymans
This solution is very generic and can in principle be implemented on all arch/soc. Currently the old infrastructure to pass on information from romstage to ramstage is left in place and will be removed in a follow-up commit. Nvidia Tegra will be handled in a separate patch because it has a custom ramstage entry. Instead trying to figure out which files can be removed from stages and which cbmem_top implementations need with preprocessor, rename all cbmem_top implementation to cbmem_top_romstage. Mechanisms set in place to pass on information from rom- to ram-stage will be replaced in a followup commit. Change-Id: I86cdc5c2fac76797732a3a3398f50c4d1ff6647a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-01lib/cbmem_top: Add a common cbmem_top implementationArthur Heymans
This adds a common cbmem_top implementation to all coreboot target. In romstage a static variable will be used to cache the result of cbmem_top_romstage. In ramstage if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is set a global variable needs to be populated by the stage entry with the value passed via the calling arguments. if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is not set the same implementation as will be used as in romstage. Change-Id: Ie767542ee25483acc9a56785ce20a885e9a63098 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36273 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-01soc/{mediatek,sifive}: Remove unused 'include <arch/barrier.h>'Elyes HAOUAS
Change-Id: Ia15824effc8f846ff1143abe698c5a0546df7868 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36489 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-31soc/mediatek/mt8183: Disable DRAM DVFS in recovery modeYu-Ping Wu
Currently full calibration with DVFS (which implies tripling memory training time for multiple frequencies) will be run in recovery mode, which takes up to 30 seconds with serial console enabled. However, in recovery mode the system should be running only the recovery programs with minimal services. DVFS should be not needed. In order to improve stability and system boot time, we want to disable DVFS training in recovery mode. BRANCH=kukui BUG=b:142358843 TEST=emerge-kukui coreboot Change-Id: I4f1b1b020eba9bfce21655169bcb31b98d54b010 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36456 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-28soc/mediatek/mt8183: Pass MR values as function argumentsYu-Ping Wu
To make data flow more explicit, global variables 'MR01Value' and 'MR13Value' are replaced with local variables, which are passed as function arguments. BRANCH=kukui BUG=none TEST=1. emerge-kukui coreboot 2. Fast calibration succeeded Change-Id: Id21483092c86c3ae7dbb1173a2b943defe41a379 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-24soc/mediatek/mt8183: Add udelay after setting voltagesYu-Ping Wu
The SOC DRAM team suggested to delay at least 1us after setting new voltage in PMIC wrapper so the new value can be effective. BRANCH=kukui BUG=b:142358843 TEST=emerge-kukui coreboot Change-Id: I19d236769c3c0c87513ea4a0a3f64b83e3a844c2 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36254 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24soc/mediatek/mt8183: Improve DRAM calibration logsYu-Ping Wu
- Add macro dramc_err. - Some log levels are changed. - Some messages are improved for readability. BRANCH=kukui BUG=none TEST=emerge-kukui coreboot Change-Id: If0c9e61c0f81a06e9264784f682a6c373574e06b Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35767 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24soc/mediatek/mt8183: Correct continuation line indentYu-Ping Wu
BRANCH=kukui BUG=none TEST=emerge-kukui coreboot Change-Id: I9d01d24d3494f2eb28cfb411e13adf3b6717d191 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36285 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-24soc/mediatek/mt8183: Force retraining memory if requestedHung-Te Lin
To allow retraining memory without hotkey (for example in manufacturing process), we want to enforce re-training when the recovery reason is set to VB2_RECOVERY_TRAIN_AND_REBOOT (which can be done by running "crossystem recovery_request=0xc4"). The special reason was created for X86 MRC cache, for ensuring RO calibration data is filled (the underlying implementation was in vboot, not coreboot); and on MT8183 we have only RW calibration, but it seems totally fine to extend that for RW. BRANCH=kukui BUG=None TEST=boots; crossystem recovery_reason=0xc4; reboot Change-Id: Iaa5275f0e0eb90f6ab3a7d4579977a6655d59bd9 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-23soc/mediatek/mt8183: Fix incorrect usage of sizeofYu-Ping Wu
BRANCH=kukui BUG=none TEST=emerge-kukui coreboot Change-Id: Ic2f6bfaf42aed642e1d7d6aba5db373944eb8ef6 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-10-23soc/mediatek/mt8183: add dphy reset after setting lanes numberJitao Shi
Add dphy reset after setting lanes number to avoid dphy fifo error. BUG=b:139150763 BRANCH=kukui TEST=Boots correctly on kukui Change-Id: Ib83576f3700ef98c90f0b4dd101dcaa237d562f9 Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-23soc/mediatek/mt8183: fine tune the phy timingJitao Shi
To fix MIPI D-PHY test failure, the hs-prepare should be less than LimitMin from spec, and we have to enlarge TEOT margin. BUG=b:138344447 BRANCH=kukui TEST=Boots correctly on kukui Change-Id: If91e7a546866299f02432be27fe778be5d7bdc5f Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-21src/{device,drivers,mb,nb,soc,sb}: Remove unused 'include <console/console.h>'Elyes HAOUAS
Change-Id: I0c965e598e260ff8129aa07fb9fc5bf6e784e1d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-21soc/mediatek/mt8183: Force DRAM retraining if hotkey pressedYu-Ping Wu
Similar to MRC cache on x86 platforms, when a hotkey is pressed during boot, the calibration data cache saved in the flash will be cleared, consequently triggering DRAM retraining (full calibration) in the next boot. BRANCH=kukui BUG=b:139099592 TEST=emerge-kukui coreboot Change-Id: I2f9225f359e1fe5733e8e1c48b396aaeeb9a58ab Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-21soc/mediatek/mt8183: Skip fast calibration in recovery modeYu-Ping Wu
SoC DRAM team suggested always running full calibration mode in recovery mode because it is possible to get unstable memory even if the complex memory test has been passed. Since the recovery mode runs from RO and we only have training data cache for RW, the trained calibration data can't be saved since RO and RW may be running different firmware. Also revised few message to make it more clear for what calibration mode (fast, full, or partial) has been executed. BRANCH=kukui BUG=b:139099592 TEST=emerge-kukui coreboot Change-Id: I29e0df71dc3357462e15ce8fc2ba02f21b54ed33 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-20src: Remove unused 'include <string.h>'Elyes HAOUAS
Change-Id: I2a94c3b6282e9915fd2b8136b124740c8a7b774c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-10-18soc/mediatek/mt8183: Compress calibration blob with LZ4Hung-Te Lin
The DRAM calibration blob can be compressed using pre-RAM algorithm (currently LZ4), which will save ~12ms in boot time. On Kodama, boot time difference: Before: 1,082,711 After: 1,070,309 BUG=b:139099592,b:117953502 TEST=build and boot, cbfstool coreboot.rom print -v (see dram compressed) BRANCH=kukui Change-Id: Ic3bd49d67ee6f80a0e4d8f6945744642611edf64 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-18soc/mediatek/mt8183: Pass impedance data as a function argumentYu-Ping Wu
To make data flow more explicit, global variable 'impedance' is replaced with a local variable, which is passed as a function argument. BUG=none BRANCH=kukui TEST=Krane boots correctly Change-Id: I0f6dacc33fda013a3476a10d9899821b7297e770 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-18soc/mediatek/mt8183: Run calibration with multiple frequencies for DVFS switchHuayang Duan
The patch adds config MT8183_DRAM_DVFS to enable DRAM calibration with multiple frequencies to support DVFS switch. BUG=b:80501386,b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Change-Id: I97c8e513dc3815a2d62b2904a246a1d8567704a4 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-18soc/mediatek/mt8183: Adjust DRAM voltages for each DRAM frequencyHuayang Duan
This patch supports voltage adjustment for each DRAM frequency, which is neccesary to support DVFS switch. BUG=b:80501386,b:142358843 BRANCH=none TEST=Boots correctly and stress test pass on Kukui. Change-Id: I9539473ff708f9d0d39eb17bd3fdcb916265d33e Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-10-18soc/mediatek/mt8183: Allow modifying vddq voltageHsin-Hsiung Wang
DRAM DVFS needs to be calibrated with different vddq voltages to get correct parameters. A new API is added to allow changing vddq voltage. BUG=b:80501386 BRANCH=none TEST=measure vddq voltage with multimeter Change-Id: I5f0d82596a1709bf0d37885f257646133f18f210 Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35147 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-18soc/mediatek/mt8183: Allow modifying vdram1 voltageHsin-Hsiung Wang
DRAM DVFS needs to be calibrated with different vdram1 voltages to get correct parameters. A new API is added to allow changing vdram1 voltage. BUG=b:80501386 BRANCH=none TEST=measure vdram1 voltage with multimeter Change-Id: Ia15ab3a2e1668e5b4873d317b57a38ebee037709 Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33186 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 05:18:07 +0000