summaryrefslogtreecommitdiff
path: root/src/soc/mediatek/mt8196/Makefile.mk
AgeCommit message (Collapse)Author
2024-11-13soc/mediatek/mt8196: Enable lastbus debug hardwareXiwen Shao
Lastbus is a bus debug tool. When the bus hangs, the bus transmission information before resetting will be recorded. The watchdog cannot clear it and it will be printed out on the serial console for bus hanging analysis. TEST=build pass, and check log with: [INFO ] ******************* MT8196 lastbus ****************** [INFO ] --- debug_ctrl_ao_APINFRA_IO_AO 0x10155000 37 --- [INFO ] 00402504 [INFO ] c34b00d6 [INFO ] 61804050 [INFO ] 00051840 [INFO ] 10401610 BUG=b:317009620 Signed-off-by: Xiwen Shao <xiwen.shao@mediatek.corp-partner.google.com> Change-Id: Ib030d88faa2d4d6f6a8501f8c752deeafff92c5c Reviewed-on: https://review.coreboot.org/c/coreboot/+/84928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-13soc/mediatek/mt8196: Map LPDDR type to mem_chip_typeCrystal Guo
Implement map_to_lpddr_dram_type to convert MT8196 specific DRAM_DRAM_TYPE_T values to mem_chip_type. BUG=b:357743097 TEST=Firmware shows the following log: LPDDR5 chan0(x16) rank0: density 12288mbits x16, MF 06 rev 0800 LPDDR5 chan0(x16) rank1: density 12288mbits x16, MF 06 rev 0800 LPDDR5 chan1(x16) rank0: density 12288mbits x16, MF 06 rev 0800 LPDDR5 chan1(x16) rank1: density 12288mbits x16, MF 06 rev 0800 LPDDR5 chan2(x16) rank0: density 12288mbits x16, MF 06 rev 0800 LPDDR5 chan2(x16) rank1: density 12288mbits x16, MF 06 rev 0800 LPDDR5 chan3(x16) rank0: density 12288mbits x16, MF 06 rev 0800 LPDDR5 chan3(x16) rank1: density 12288mbits x16, MF 06 rev 0800 Change-Id: I63ce238ff0fbcdde9020a7cf4fee2e29d6decf37 Signed-off-by: Crystal Guo <crystal.guo@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85099 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-13soc/mediatek/mt8196: Add dram calibration supportJarried Lin
Add support for MT8196 DRAM calibration. DRAM parameters and related constants are added in dramc_param.h and dramc_soc.h. As MT8196's dramc_param struct size is different from other MediaTek SoCs, replace the hardcoded RW_MRC_CACHE size in common code with a constant derived from chromeos.fmd. The common emi.c can be reused for MT8196 as well, so remove the duplicate mt8196/emi.{c,h}. Enable MEDIATEK_DRAM_BLOB_FAST_INIT to allow running DRAM fast calibration via the DRAM blob. Test=Build pass BUG=b:317009620 Change-Id: Ifeaf73e31b29ef376a28ca2721dba0d4866d6e8b Signed-off-by: Crystal Guo <crystal.guo@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85098 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-08soc/mediatek/mt8196: Add SPI driver supportLiya Li
Add SPI controller driver code with support for 8 buses (SPI0 to SPI7). Test=Build pass, verify the wavefroms for SPI0~7 are correct. BUG=b:317009620 Change-Id: I10dd1105931c4911ce5257803073b7af76115c75 Signed-off-by: Liya Li <ot_liya.li@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84930 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-08soc/mediatek/mt8196: Add PLL and clock init supportGuangjie Song
Add PLL and clock init code, frequency meter and APIs for raising little CPU frequency and set tvdpll frequency. TEST=build pass and driver init ok BUG=b:317009620 Signed-off-by: Guangjie Song <guangjie.song@mediatek.corp-partner.google.com> Change-Id: Icac99fb210c87c8b7b14af627fbd2f14e4c47240 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-11-06soc/mediatek/mt8196: Disable irq2axi featureRunyang Chen
Irq2axi translates wire-based interrupt into message signal interrupt. Since MT8196 uses legacy wire-based interrupt, this feature needs to be disabled. If the interrupt is not handled, it will cause the system fail to boot. TEST=Build pass, check irq2axi_disable log and the interrupt can be correctly handled by checking /proc/interrupts. BUG=b:317009620 Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com> Change-Id: I0e89a0ee75e574a4b9e8df0a0f6a5f6e03bba2d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84896 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06soc/mediatek/mt8196: Enable EARLY_MMU_INITYidi Lin
The boot time is improved by 58ms in bootblock. (78ms -> 20m) BUG=b:361729697 TEST=check cbmem Change-Id: I27ce378ba8e3744cfb3921835e34b32bbba991cb Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84897 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-06mb/google/rauru: Complete PCIe reset in romstageYidi Lin
De-assert PERST# at romstage to reduce the waiting time in ramstage. BUG=b:361728592 TEST=The boot time improves 62ms Change-Id: I2cd5cd59e7513b6e4036c3e8013a3c7322d2f787 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-10-28soc/mediatek/mt8196: Add PCIe driver and early init supportJianjun Wang
Add PCIe driver for MT8196 platform. According to the PCIe CEM specification, the deassertion of PERST# should occur at least 100ms after the assertion. To ensure the 100ms delay requirement is met and to save delay time in the ramstage, add an early init data region to store the elapsed time since assertion. This will speed up the boot time by 100ms. PCIe port 1 and port 2 share the same PCIe resources, but PCIe port 2 is not used. Therefore, in mtk_pcie_pre_init(), make sure PCIe port 2 is reset to prevent interference with PCIe port 1. TEST=Build pass, show pcie init pass log: mtk_pcie_domain_enable: PCIe link up success (1) BUG=b:317009620 Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I826a96822e88972bcd4966b6681797a646adf3d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-09-30soc/mediatek/mt8196: Fix timer reset in BL31Jarried Lin
After reboot, the system does not need to serve pending IRQ from systimer. Therefore, clear systimer IRQ pending bits in init_timer(). For that to work, the systimer compensation version 2.0 needs to be enabled. TEST=Build pass and timestamp is not reset in ATF and payload BUG=b:343881008 Change-Id: I520986b81ca153ec3ce56558a80619448cfc0c59 Signed-off-by: Zhanzhan Ge <zhanzhan.ge@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83928 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-09-06soc/mediatek/mt8196: Add EINT supportYidi Lin
Add support to configure GPIOs to pull for external interrupts (EINT). BUG=b:334723688 TEST=Talk with Ti50 TPM using IRQ flow. Change-Id: Ibeb2dafcd9909b4afbfa81728700718f01d3818f Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84026 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-29soc/mediatek/mt8196: Add USB host supportMingjin Ge
Add USB host function support. TEST=read usb data successfully. BUG=b:317009620 Signed-off-by: Mingjin Ge <mingjin.ge@mediatek.corp-partner.google.com> Change-Id: Ia4efcddac9bf5e04e688648a5c22384075a0b026 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-08-24soc/mediatek/mt8196: Add I2C driver supportHao Han
Add I2C controller driver. TEST=build pass BUG=317009620 Change-Id: I617ad8a43ce8b492b1a0e5dc06c1f0ffe7d92b5e Signed-off-by: ot_hao.han@mediatek.corp-partner.google.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/83927 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-08-24soc/mediatek/mt8196: Initialize watchdogJarried Lin
Add watchdog support for MT8196. TEST=build pass and WDT uart log BUG=b:317009620 Change-Id: I9d5e71aa27d469855c2bd65abc5309d69a018750 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-08-24soc/mediatek/mt8196: Enable MMU operation for L2C SRAM and DMAJarried Lin
- Turn off L2C SRAM and reconfigure as L2 cache: Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready. After DRAM is ready, we should invoke disable_l2c_sram to reconfigure the L2C SRAM as L2 cache. - Configure DMA buffer in DRAM: Set DRAM DMA to be non-cacheable to load blob correctly. TEST=build pass, register(disable_l2c) read ok BUG=b:317009620 Change-Id: I6a3cb63d3418f085f5d8d08b282dd59ea431c294 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83925 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-08-24soc/mediatek/mt8196: Add NOR-Flash supportJarried Lin
Add NOR-Flash drivers for flash read/write. TEST=read nor flash data successfully. BUG=b:317009620 Change-Id: Id0a19f0520020f16c4cf9d62da4228a5b0371b91 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83923 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23soc/mediatek/mt8196: Add GPIO driverJarried Lin
Add GPIO driver for other modules to control GPIO pins. TEST=build pass BUG=b:317009620 Change-Id: I6d1e6ef17660308c8de908697ffba6b5f17ff9ae Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83922 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-23soc/mediatek/mt8196: Add a stub implementation of the MT8196 SoCJarried Lin
Add new folder and basic drivers for Mediatek SoC 'MT8196'. Refer to MT8196_Chromebook_Application_Processor_Datasheet_V1.0 for MT8196 SPEC detail. This patch also enables UART and ARM arch timer. TEST=saw the coreboot uart log to bootblock BUG=b:317009620 Change-Id: I8190253ed000db879b04a806ca0bdf29c14be806 Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-05 10:49:32 +0000