Age | Commit message (Collapse) | Author |
|
Change-Id: Ia951a466479b1e98e49895705162a66aece7609b
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ida822d704b04cc4d1dfffb58003fc308bcb502d0
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This patch basically does two things -
1) Remove unnecessary setting of flex_ratio to TDP nominal:
Factory configured (default) Max Non-TURBO ratio(P1) is already cofigured
in MSR_PLATFORM_INFO(0xCE).
If this Maximum Non-TURBO Ratio(P1) needs to be modified, it should be done
using MSR_FLEX_RATIO (0x194).
Here, in this code, the FLEX_RATIO is being modified by the TDP Nominal
Ratio, reading the MSR_CONFIG_TDP_NOMINAL(0x648). But this value is
actually less than the factory configured Maximum Non TURBO Ratio (P1).
So, this code is actually not required.
Also, the Bit 12 in PCH Soft Strap Register is already set in descriptor.
This Bit implies Processor Boot Max Frequency -
0 = Disable Boot Max Frequency
1 = Enable Boot Max Frequency (Default)
This setting determines if the processor will operate at maximum frequency
at power-on and boot.
Thus this patch will avoid one extra platform warm reset now onwards.
2) Remove wrongly setting Max Frequency in Bootblock phase:
In the function set_max_frequency(), the P-State max ratio was set to
TDP Nominal ratio if C-TDP was enabled, else it was set to Max Non
Trbo ratio.
But, when the cpu gets reset, it will operate with the Max-Non Turbo
ratio only, which is greater than the TDP Nominal ratio.
So, no need to set back the ratio to TDP Nominal which is lower than
the currently operating frequency.
BUG=none
BRANCH=none
TEST=Build and boot poppy
Change-Id: I24bfc86ddf0f038d85da938e41e950382fe2a6c3
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There is no choice, if not leaving it with the default the build
will fail.
Change-Id: Id91e3ce87f8ced3001fcd2125f8f6781b270f5bc
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/20402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cannonlake has built-in UART driver as part of LPSS block. However port
mapped decoders are in use as well.
Change-Id: I9f209bf29c1748c5beea31bc6b31cb07a1e14195
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
When the C compiler expects 16-byte alignment of the stack it is
at the call instruction. Correct existing call points from assembly
to ensure the stacks are aligned to 16 bytes at the call instruction.
Change-Id: Icadd7a1f9284e92aecd99c30cb2acb307823682c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic48401e92103ff0ec278fb69a3d304148a2d79aa
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/19759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add Cannon Lake SoC boilerplate directory with:
* SoC directory
* Base Kconfig
* Dummy cbmem.c
Change-Id: Ie28d8b56a1d1afcf1214ef734a08be6efcc8a931
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Return CB_SUCCESS and CB_ERR instead of some integer.
Preparation to merge intel/soc and intel/nb opregion implementations.
Change-Id: Ib99fcfe347b98736979fc82ab3de48bfc6fc7dcd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
... even though the author of the code probably wished he was
working on a (much faster) broadwell system instead. Let's fix
the header guard to reflect the right SOC.
Noteworthy: clang detected that this was wrong.
Change-Id: I74c217c0471800f40c31a9ac38ba5396f82cd724
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In the D0 and D3 ACPI methods use word access to the PME status and
control register. This brings the code inline with the Intel reference
code and matches how the kernel handles access to this register.
BUG=b:35587084
BRANCH=eve
TEST=manual stress testing of D0<>D3 transition across multiple devices
Change-Id: I53f7465d6ad5da1780a5641ff52056445ebaca8b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
For the skylake/kabylake generation of PCH there is an ACPI workaround
for emmc/sd power state that involves disabling and re-enabling dynamic
clock gating after enabling power to the controller, before setting the
power state to D0.
Under certain conditions we have observed that the controller is not
powered and ready by the time the kernel attempts to read the PME
control and status register and so the system will hang while attempting
to read PCI config register 0x84.
To ensure that the controller is ready add a 2ms delay after re-enabling
dynamic clock gating and before setting the power state to D0.
This issue has been observed on eMMC, but the same workaround exists for
the SD card interface so the same delay is added there.
BUG=b:35587084
BRANCH=eve
TEST=manual stress testing of D0<>D3 transition across many devices
shows no hard hang after 2 days.
Change-Id: If0f0323cf5437c54c907c332937b5de9dda2d8f6
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/20363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Code checked manually
Change-Id: I91ababb3bf7aa1ab0f71bb005c4685e81bb4d92f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/20252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
As per latest BWG, ucode reloading should be done at the end
of Mp Init, i.e., after PRMRR and other features are enabled.
No reloading specifically after SMM Relocation is required.
As, in the Common CPU MP Init code, we are already doing a
uCode load at the end of MP Init Feature Programming, hence,
the uCode loading after SMM relocation can be removed.
Change-Id: Ib1957c5fe5a8c83bb20b978a9841670b0c3e8846
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch uses the common CPU Mp Init code.
BUG=none
BRANCH=none
TEST=Build and boot poppy
Change-Id: Ieb2f8ae25a31e86e9251fe97859678745fe610f5
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This patch contains State Machine callbacks init_cpus()
and post_cpu_init().
Also, it has the SOC call for CPU feature programming.
Change-Id: I5b20d413c85bf7ec6ed89b4cdf1770c33507236b
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SMI code is very similar across Intel platforms. Move this code to
common/block/smi to allow it to be shared between platforms instead
of duplicating the code for each platform. smihandler.h has already
been made common so all it will contain is name changes and a move
to the common block location. Due to moving smihandler code, APL
changes are bundled here to show this change.
Change-Id: I599358f23d5de7564ef1ca414bccd54cebab5a4c
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/19392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add SPI driver code for the legacy SPI flash controller. Enable erase
and write support allowing coreboot to save non-volatile data into
the SPI flash.
TEST=Build and run on Galileo Gen2.
Change-Id: I8f38c955d7c42a1e58728c728d0cecc36556de5c
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/20231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch uses common SCS library to setup
sd card.
Change-Id: I06898e30a9b39f169b35f581a3ee09238f0f40c4
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/20217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
This patch uses common SCS library to setup
sd card.
Change-Id: Iafbba04d7a498b9a321e8efee4abf07820d17330
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/19632
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Create Intel Common SCS code. This code currently only contains
the code for SD card SSDT generation. More code will get added up
in the subsequent phases.
Change-Id: I82f034ced64e1eaef41a7806133361d73b5009d3
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/19631
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Change-Id: I88e376d61c4aba5030a0be7c8bdfe7b57881a197
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/20169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Don't allow the user to set PCIe configspace base address.
Don't allow the user to set the DCACHE size and base.
Change-Id: I7a42cc5f6098214364624bcfa3cbd93b4903ee84
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: Ic1656311ecc670dc0436995f0ec8199d270da4d1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: I8b2794f56f39492589a08e5676cb33eec89a976e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20179
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: I254549057552be93611afa8ca52d22be220fe3dc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Does not need to changeable in menuconfig.
Change-Id: Id488f7333952d10d10a62ac75298ec8008e6f9b4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/20177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
A major regression was introduced with commit 6520e01a
(soc/intel/apollolake: Perform CPU MP Init before FSP-S Init)
where the APs execution context is taken away by FSP-S. It
appears that FSP-S is not honoring the SkipMpInit UPD because
it's been shown with some debug code that FSP-S is compeltely
hijacking the APs:
Chrome EC: Set WAKE mask to 0x00000000
Chrome EC: Set WAKE mask to 0x00000000
CBFS: 'VBOOT' located CBFS at [440000:524140)
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 2e700 size 1a00
Running FSPS in 4 secs.. 315875 4315875
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
cpu2 Waiting for work
cpu3 Waiting for work
cpu1 Waiting for work
Running FSPS.. 4315875 4315875
ITSS IRQ Polarities Before:
ITSS IRQ Polarities Before:
IPC0: 0xffffeef8
IPC1: 0xffffffff
IPC2: 0xffffffff
IPC3: 0x00ffffff
ITSS IRQ Polarities After:
IPC0: 0xffffeef8
IPC1: 0x4a07ffff
IPC2: 0x08000000
IPC3: 0x00a11000
This is essentially a revert of 6520e01a to fix the previous
behavior.
Change-Id: I2e136ea1757870fe69df532ba615b9bfc6dfc651
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20215
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
|
|
Change-Id: Ib7aa495ccfd405d6ffc968388c28dc540da2f525
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20203
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
If I2C device is disabled:
1. BAR for the device will be 0
2. There is no need to generate ACPI tables for the device
TEST=Verified that if an i2c device is disabled statically in
devicetree or dynamically in mainboard, then coreboot does not die
looking for missing resources.
Change-Id: Id9a790e338a0e6f32c199f5f437203e1525df208
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
USB port status register can be used to decide if a particular port
was responsible for generating PME# resulting in device wake:
1. CSC bit is set and port is capable of waking on connect/disconnect
2. PLC bit is set and port is in resume state
BUG=b:37088992
TEST=Verified with wake on USB2.0 port 3, mosys shows:
19 | 2017-06-08 15:43:30 | Wake Source | PME - XHCI (USB 2.0 port) | 3
Change-Id: Ie4fa87393d8f096c4b3dca5f7a97f194cb065468
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/20122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There are many good reasons why we may want to run some sort of generic
callback before we're executing a reset. Unfortunateley, that is really
hard right now: code that wants to reset simply calls the hard_reset()
function (or one of its ill-differentiated cousins) which is directly
implemented by a myriad of different mainboards, northbridges, SoCs,
etc. More recent x86 SoCs have tried to solve the problem in their own
little corner of soc/intel/common, but it's really something that would
benefit all of coreboot.
This patch expands the concept onto all boards: hard_reset() and friends
get implemented in a generic location where they can run hooks before
calling the platform-specific implementation that is now called
do_hard_reset(). The existing Intel reset_prepare() gets generalized as
soc_reset_prepare() (and other hooks for arch, mainboard, etc. can now
easily be added later if necessary). We will also use this central point
to ensure all platforms flush their cache before reset, which is
generally useful for all cases where we're trying to persist information
in RAM across reboots (like the new persistent CBMEM console does).
Also remove cpu_reset() completely since it's not used anywhere and
doesn't seem very useful compared to the others.
Change-Id: I41b89ce4a923102f0748922496e1dd9bce8a610f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/19789
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
For an unknown reason, the I2C ACPI devices were placed
under \SB intead of \SB.PCI0, as with all other non-Atom
based Intel platforms. While Linux is tolerant of this,
Windows is not. Correct by moving I2C ACPI devices where
they belong.
Also, adjust I2C devices at board level for google/rambi
as to not break compilation.
Change-Id: I4ef978214aa36078dc04ee1c73b3e2b4bb22f692
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20056
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch makes SOC files to use common/block/cpu/cpulib.c
file's helper functions.
Change-Id: I529c67cf20253cf819d1c13849300788104b083c
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/19827
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename these two Macros to help use Common Code -
ACPI_PMIO_BASE --> ACPI_BASE_ADDRESS
ACPI_PMIO_SIZE --> ACPI_BASE_SIZE
Change-Id: I21125b7206c241692cfdf1cdb10b8b3dee62b24a
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20038
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables ACPI timer emulation on all the logical cpus.
BUG=chrome-os-partner:62438
BRANCH=NONE
TEST=Verify MSR 0x121 gets programmed on all logical cpus during coreboot MP Init.
Change-Id: I2246cdfe1f60fd359b0a0eda89b4a45b5554dc4a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/18288
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes SOC files to use common/block/cpu/cpulib.c
file's helper functions.
Change-Id: I6af56564c6f488f58173ba0beda6912763706f9f
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/19566
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create Intel Common CPU library code which provides various
CPU related APIs.
This patch adds cpulib.c file which contains various helper
functions to address different CPU functionalities like -
cpu_set_max_ratio(),
cpu_get_flex_ratio(),
cpu_set_flex_ratio(),
cpu_get_tdp_nominal_ratio(),
cpu_config_tdp_levels(),
cpu_set_p_state_to_turbo_ratio(),
cpu_set_p_state_to_nominal_tdp_ratio(),
cpu_set_p_state_to_max_non_turbo_ratio(),
cpu_get_burst_mode_state(),
cpu_enable_burst_mode(),
cpu_disable_burst_mode(),
cpu_enable_eist(),
cpu_disable_eist(),
cpu_enable_untrusted_mode()
Change-Id: I2f80c42132d9ea738be4051d2395e9e51ac153f8
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/19540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
As per BWG, CPU MP Init (loading ucode) should be done prior
to BIOS_RESET_CPL. Hence, pull MP Init to BS_DEV_INIT_CHIPS Entry
(before FSP-S call).
BUG=none
BRANCH=none
TEST=Build and boot Reef
Change-Id: I49f336c10d6afb71f3a3b0cb8423c7fa94b6d595
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20037
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since get_microcode_info() is aleady searching for the microcode in cbfs,
we can just add a intel_microcode_load_unlocked() call here to update
the microcode. No need to duplicate finding microcode step during
pre_mp_init() function.
Change-Id: I525cab0ecc7826554f0a1209862e6357d1c7a9a6
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
FIT is already loading microcode before CPU Reset. So, we need
not update the microcode again in RO FW in bootblock.
But we need to update in RW FW if there is any new ucode version.
So, added the update microcode function in get_microcode_info callback
before MP Init to make sure BSP is using the microcode from cbfs.
BUG=none
BRANCH=none
TEST=Build and Boot poppy
Change-Id: I5606563726c00974f00285acfa435cadc90a085e
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/20051
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
If the boot media is memory mapped temporarily mark it as write
protect MTRR type so that memory-mapped accesses are faster.
Depthcharge payload loading was sped up by 75ms using this.
Change-Id: Ice217561bb01a43ba520ce51e03d81979f317343
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The fast_spi_cache_bios_region() does the necessary lookup
of BIOS region size, etc. Don't inline the calculation and
just defer to the common piece of code for memory-mapped
spi flash boot.
Change-Id: I6c390aa5a57244308016cd59679d8c3ab02031b8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
After the MTRR solution has been calculated provide a way
for code to call the same function, fast_spi_cache_bios_region(),
in all stages. This is accomplished by using the ramstage
temporary MTRR support.
Change-Id: I84ec90be3a1b0d6ce84d9d8e12adc18148f8fcfb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20115
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch perform resource mapping for PCI,
fixed MMIO, DRAM and IMR's based on inputs given by SoC.
TEST=Ensure PCI root bridge 0:0:0 memory resource allocation
remains same between previous implementation and current
implementation.
Change-Id: I15a3b2fc46ec9063b54379d41996b9a1d612cfd2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/19795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch perform resource mapping for PCI,
fixed MMIO, DRAM and IMR's based on inputs given by SoC.
TEST=Ensure PCI root bridge 0:0:0 memory resource allocation
remains same between previous implementation and current
implementation.
Change-Id: I93567a79b2d12dd5d6363957e55ce2cb86ff83a7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/19796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add Intel common systemagent support for romstage and ramstage.
Include soc specific macros need to compile systemagent common code.
Change-Id: I969ff187e3d4199864cb2e9c9a13f4d04158e27c
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/19668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
cherry-pick from Chromium, commit 8fbe1e7
On Braswell and Baytrail devices, by userland 'perf top',
observed demanding clocks on __vdso_clock_gettime() since
chromeos_3.18 kernel; besides, evaluated massive calling of
clock_gettime() cost, up to 700 ns in average.
It turns out that Linux kernel of map_vdso() first call of
remap_pfn_range() does not fall into reserve_pfn_range()
due to size parameter, instead it relies on lookup_memtype()
and potentially be failed to be identified as eligible RAM
resource because the function of pat_pagerange_is_ram() actually
walks through root's sibling.
Meanwhile, on current BSW (and BYT) firmware implementation
makes System RAM resources located on child leaf, combining all
of these factors makes the kernel treat the vvar page of vdso
as a uncached-minus one leading slow access in result.
This patch recollects TOLM accessing; as Aaron recalled some
core_msr_script turns off access to TOLM register, he suggests
to store tolm to avoid getting back a zero while setting acpi
nvs space.
Original-Change-Id: Iad4ffa542b22073cb087100a95169e2d2a52efcd
Original-Signed-off-by: Harry Pan <harry.pan@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/368585
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Idc9765ec5c0920dc98baeb9267a89bec5cadd5a0
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The ASPM options (L1 substates, CLKREQ support, Common Clock and ASPM)
are hardcoded for broadwell chips, but some boards may not support
these ASPM options even if the SoC does support it (non-wired CLKREQ
pin for example).
This is required to disable L1 substates on the Purism/Librem 13 which
seems to have issues with NVMe drives falling into L1.2 state and not
being able to exit that state.
Change-Id: I2c7173af1d482cccdc784e3fa44ecbb5d38ddc34
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Adapted from Chromium commit 8fbe1e7 for soc/braswell
(also review.coreboot.org/#/c/20060/); same issue affects
baytrail as well.
This patch recollects TOLM accessing; as Aaron recalled some
core_msr_script turns off access to TOLM register, he suggests
to store tolm to avoid getting back a zero while setting acpi
nvs space.
Change-Id: Ib26d4fe229b3f7d8ee664f5d89774d1f4a997f51
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Each I2C controller should have a unique pair of DMA request lines,
and DMA channels should be assigned incrementally, rolling over as
necessary.
Source: Intel Baytrail/ValleyView UEFI reference code
Change-Id: Icc9b27aaa14583d11d325e43d9165ddda72ca865
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Each I2C controller should have a unique pair of DMA request lines,
and DMA channels should be assigned incrementally, rolling over as
necessary.
Source: Intel Braswell UEFI reference code
Change-Id: I1d97b5a07bf732c27caf57904c138b120b93ca81
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For an unknown reason, the I2C ACPI devices were placed
under \SB intead of \SB.PCI0, as with all other non-Atom
based Intel platforms. While Linux is tolerant of this,
Windows is not. Correct by moving I2C ACPI devices where
they belong.
Also, adjust I2C devices at board level for intel/strago
and google/cyan as to not break compilation.
Change-Id: Iaf8211bd86d6261ee8c4d9c4262338f7fe19ef43
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/20055
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI method GPLD to generate port location data when
passed visiblity info. Will be used by _PLD method in
board-specific USB .asl files.
Change-Id: I14ba3cea821e103208426e9fcaa0833d84157ff8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The new config choice is called RUN_FSP_GOP. Some things had to happen
on the road:
* Drop confusing config GOP_SUPPORT,
* Add HAVE_FSP_GOP to chipsets that support it,
* Make running the GOP an option for FSP2.0 by returning 0
in random VBT getters.
Change-Id: I92f88424004a4c0abf1f39cc02e2a146bddbcedf
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch fixes ACPI debug print issue reported internally
while using APRT asl method. Potentially some junk characters
gets added into final print buffer due to LPSS MMIO register
space is 32 bit width and ADBG is one byte at a time.
TEST=Built and boo eve to ensure to be able to get ASL console
log without any corruption.
Change-Id: I0b6af789c0ffc79f7fee4652b4aa6a125b182296
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20009
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The word 'coreboot' should always be written in lowercase, even at the
start of a sentence.
Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The coreboot sites support HTTPS, and requests over HTTP with SSL are
also redirected. So use the more secure URLs, which also saves a
request most of the times, as nothing needs to be redirected.
Run the command below to replace all occurences.
```
$ git grep -l -E 'http://(www.|review.|)coreboot.org'
| xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g'
```
Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/20034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Remove PCI IDs inclusion from soc header rather referring those
from device/pci_ids.h.
Change-Id: I490da3e336fb6f8194d5fba800132f550ed5ab37
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/20015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Place `tdp_pl2_override` above the FSP options as it's not an FSP option.
Change-Id: Idff2b628d19ce1a80294b28c55c05ba4157d07e0
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Provide some enums instead of unreadable comments that are usually
copied all over.
Change-Id: Iff551565647f28ecb226e1df633b4deec0ab0a7f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
FSP_IMAGE_ID and FSP_IMAGE_REV are defined in `FspUpdVpd.h`. Check
against these to avoid mismatching definitions in coreboot and the
FSP blob.
Change-Id: Ic86229e7f0c2d0525b8a79add292c6c81a349aa6
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/19635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I7b415711d01ddc0d998eba62de2c2139045efa80
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use timer code from soc/intel/common. This code removes
monotonic timer refrence w.r.t MSR 24Mhz counter(0x637)
and use tsc timer.
Change-Id: I7fad620b11c9e5db128f646639c79ea58a0a574f
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add common timer code to get tsc frequency(Mhz).
Change-Id: Ifd4b24735c74c636348fc32afbcc267e384cb610
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add config for cpu base clock frequency(Mhz), use and
clean up code.
Change-Id: I724c48c11796aa942295d4f19cc629d4c13647e1
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/20017
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add config for cpu base clock frequency(Mhz) and replace current
refrence from soc/cpu.h with config option.
Change-Id: Idf8e85f7ae6d965fa987a4f5c4905503ee354d69
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/20016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add fast_spi_cache_bios_region() that sets up a variable
MTRR as write-protect covering the fast spi BIOS region.
Change-Id: I282c5173cc655004daf16ea2e85423aaded3648d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/20019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Add ACPI method GPLD to generate port location data when
passed visiblity info. Will be used by _PLD method in
board-specific USB .asl files.
Change-Id: Id6e6699fe3eaafbe6847479d45c70a1d57bd327a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Currently, there is no macro to set GPIO interrupt trigger mode.
The purpose is to make coreboot set same trigger mode as GpioInt
BUG=b:62067569
TEST=checked unused interrupt on SD_CD does not happen after s3 resume
Change-Id: I42b9cd80b494e24c55b97e54cdf59bfd24dd9054
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/19992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add ACPI method GPLD to generate port location data when
passed visiblity info. Will be used by _PLD method in
board-specific USB .asl files.
Change-Id: Iad947ae2cd541d3407455b218c2b352b9a373718
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19973
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add device/address stub for XHCI USB port 7.
Stub data will be supplemented by board-specific info
added in subsequent commits.
Change-Id: Iae874a9ba01e9428e07cf7ff15e663365b2354a9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add device/address stubs for XHCI USB ports 7/8, 10-15.
Stub data will be supplemented by board-specific info
added in subsequent commits.
Change-Id: Ice86bd226a70bd5996430e7a68a026cc825ba187
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19968
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Systemagent common code will use MCH_BASE_ADDRESS macro,
hence cleaning current APL code to adhere such changes.
Change-Id: Iace1cf786b08221c3955101186509ac5161c3841
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/19793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
and add pci ids for GLK and APL from device/pci_ids.h
Change-Id: If8101fe52591b09caadfe104ca8daab4258837c7
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/19999
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The deprecated LATE_CBMEM_INIT function is renamed:
set_top_of_ram -> set_late_cbmem_top
Obscure term top_of_ram is replaced:
backup_top_of_ram -> backup_top_of_low_cacheable
get_top_of_ram -> restore_top_of_low_cacheable
New function that always resolves to CBMEM top boundary, with
or without SMM, is named restore_cbmem_top().
Change-Id: I61d20f94840ad61e9fd55976e5aa8c27040b8fb7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/19377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Add more fine-grained details about what device caused the PME wake
event. This requires checking the PME status bit (bit 15) in PCI PM
control and status register for the PCI device.
BUG=b:37088992
TEST=Verifed that XHCI wake source was identified correctly:
135 | 2017-05-25 15:28:17 | ACPI Enter | S3
136 | 2017-05-25 15:28:26 | ACPI Wake | S3
137 | 2017-05-25 15:28:26 | Wake Source | PME - XHCI | 0
Change-Id: I6fc6284cd04db311f1f86b8a86d0bb708392e5d5
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19925
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is required to add wake sources for PCIE PME events.
BUG=b:37088992
Change-Id: Ideecdf133908b0819d7d993e1c7df1a6578cb77d
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Implement GPIO ACPI AML generating functions that can be called by
coreboot drivers to generate GPIO manipulation code in AML. Following
API functions are implemented:
1. acpigen_soc_read_rx_gpio
2. acpigen_soc_get_tx_gpio
3. acpigen_soc_set_tx_gpio
4. acpigen_soc_clear_tx_gpio
In addition to the API functions above, helper functions are added to
gpio.asl to set/clear/get Tx value of GPIO.
BUG=b:62028489
Change-Id: I77e5d0decd8929a922d06b02312378f092551667
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19828
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is in preparation to get rid of the strong spi_setup_slave
implemented by different platforms.
BUG=b:38430839
Change-Id: Id3f05a2ea6eb5e31ca607861973d96b507208115
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Field Programmable Fuses (FPF) status maintained by
CSME in bits 30:31 of FWSTS6 for Skylake and Kabylake.
FPF committed means CSME has blown the fuses.
Change-Id: If63c7874e6c894749df8100426faca0ad432384b
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/19747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Change-Id: I08dd7a8c0d42d4ec7c6ff65a82553fe1efbcc424
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/19687
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add GLK PCI IDs for I2C to use common I2C code.
Change-Id: I2144199345e6382984c367f6a77f0cbb0a93daea
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/19782
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If deep Sx is enabled and prev sleep state was not S0, then if SUS
power was lost, it means that the platform had entered deep Sx. Add an
elog entry for deep Sx variant in this case.
BUG=b:38436041
TEST=Verified that elog entries are updated correctly:
Deep S5:
59 | 2017-05-19 10:39:08 | Kernel Event | Clean Shutdown
60 | 2017-05-19 10:39:09 | ACPI Enter | S5
61 | 2017-05-19 10:39:17 | System boot | 22
62 | 2017-05-19 10:39:17 | EC Event | Power Button
63 | 2017-05-19 10:39:17 | ACPI Deep Sx Wake | S5
64 | 2017-05-19 10:39:17 | Wake Source | Power Button | 0
65 | 2017-05-19 10:39:17 | Chrome OS Developer Mode
Deep S3:
66 | 2017-05-19 10:40:11 | ACPI Enter | S3
67 | 2017-05-19 10:40:16 | EC Event | Power Button
68 | 2017-05-19 10:40:16 | ACPI Deep Sx Wake | S3
69 | 2017-05-19 10:40:16 | Wake Source | Power Button | 0
Normal S3:
77 | 2017-05-19 10:43:22 | ACPI Enter | S3
78 | 2017-05-19 10:43:39 | EC Event | Power Button
79 | 2017-05-19 10:43:39 | ACPI Wake | S3
80 | 2017-05-19 10:43:39 | Wake Source | Power Button | 0
Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac4
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19798
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use SATA common code from soc/intel/common/block/sata
and clean up code.
Change-Id: Ib5d65f1afda6b2f8098f1c006623a48cf2690593
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19735
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Add SATA code support in intel/common/block to initilalize
SATA controller, allocate resources and configure SATA port
status.
Change-Id: I42ec0059f7e311a232c38fef6a2e050a3e2c0ad3
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Change-Id: Ia9fa22c30fffb1907320667ac37f55db9f3cb7b3
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Add PCIe code support under soc/intel/common/block
to initialize PCIe controller, allocate resources
and configure L1 substate latency.
Change-Id: I0c374317a3fe0be0bb1c5d9b16fcbc5cad83ca42
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
|
|
Define a new spi_flash_ops structure, move all spi flash operations to
this structure and add a pointer to this structure in struct spi_flash.
BUG=b:38330715
Change-Id: I550cc4556fc4b63ebc174a7e2fde42251fe56052
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
1. Rename __spi_flash_probe to spi_flash_generic_probe and export it
so that drivers can use it outside spi_flash.c.
2. Make southbridge intel spi driver use spi_flash_generic_probe if
spi_is_multichip returns 0.
3. Add spi_flash_probe to spi_ctrlr structure to allow platforms to
provide specialized probe functions. With this change, the specialized
spi flash probe functions are now associated with a particular spi
ctrlr structure and no longer disconnected from the spi controller.
BUG=b:38330715
Change-Id: I35f3bd8ddc5e71515df3ef0c1c4b1a68ee56bf4b
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Pointer to spi_slave structure can be passed in as const to spi flash
probe functions since the probe functions do not need to modify the
slave properties.
BUG=b:38330715
Change-Id: I956ee777c62dbb811fd6ce2aeb6ae090e1892acd
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19707
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of making all SPI drivers allocate space for a spi_flash
structure and fill it in, udpate the API to allow callers to pass in a
spi_flash structure that can be filled by the flash drivers as
required. This also cleans up the interface so that the callers can
maintain and free the space for spi_flash structure as required.
BUG=b:38330715
Change-Id: If6f1b403731466525c4690777d9b32ce778eb563
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new member page_size to spi_flash structure so that the various
spi flash drivers can store this info in spi_flash along with the
other sizes (sector size and total size) during flash probe. This
removes the need to have {driver}_spi_flash structure in every spi
flash driver.
This is part of patch series to clean up the SPI flash and SPI driver
interface.
BUG=b:38330715
Change-Id: I0f83e52cb1041432b0b575a8ee3bd173cc038d1f
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/19704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In the intel/common/block
* Move I2C common code from intel/common to intel/common/block.
* Split the code into common, early init and post mem init stages and put it
in lpss_i2c.c, i2c_early.c and i2c.c respectively.
* Declare functions for getting platform specific i2c bus config and
mapping bus to devfn and vice versa, that have to be implemented by SoC.
In skylake/apollolake
* Stop using code from soc/intel/common/lpss_i2c.c.
* Remove early i2c initialization code from bootblock.
* Refactor i2c.c file to implement SoC specific methods
required by the I2C IP block.
Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/19468
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
If there is an external 8250 UART, one needs to enable the appropriate
address ranges before console_init() is called so that the init sequence
can reach the external UART.
Furthermore FSPM needs different settings for an external UART port. For
this, the function fill_console_params() has to be adapted.
Change-Id: I62c7d0b54edd18acf793849aef352afbcaeb68b9
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/19693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
PCR_BASE_ADRESS may be zero if SOC Kconfig didn't define the non zero
default value.
TEST=Remove the PCR_BASE_ADDRESS config in Apollolake Kconfig file and
build.
BUG=None
Change-Id: I396aa1a3e89507c90e17229a986de5d2c0887c9c
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/19684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Set MSR 0x1A0 bit[16] based on EIST config option.
Default Hardware Managed P-state (HWP) also known as Intel Speed Shift
is enabled on SKL hence disable EIST and ACPI P-state table.
Change-Id: I2b7374a8a04b596edcc88165b64980b7aa09e2a7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/19676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Program C3/C7/C10 interrupt response time for all cores.
Change-Id: I4f47502e1c212118d7cc89d4de60a1854072964a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/19675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add macro to config GPIO IOSTERM bits.
BUG=b:37998248
Change-Id: I178f6d3055d4620cb3c895245c40f324383873ad
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/19576
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move drivers/storage into commonlib/storage to enable access by
libpayload and indirectly by payloads.
* Remove SD/MMC specific include files from include/device
* Remove files from drivers/storage
* Add SD/MMC specific include files to commonlib/include
* Add files to commonlib/storage
* Fix header file references
* Add subdir entry in commonlib/Makefile.inc to build the SD/MMC driver
* Add Kconfig source for commonlib/storage
* Rename *DEVICE* to *COMMONLIB*
* Rename *DRIVERS_STORAGE* to *COMMONLIB_STORAGE*
TEST=Build and run on Galileo Gen2
Change-Id: I4339e4378491db9a0da1f2dc34e1906a5ba31ad6
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/19672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|