summaryrefslogtreecommitdiff
path: root/src/soc/intel
AgeCommit message (Collapse)Author
2020-12-14soc/intel/common: Move CSE Lite driver functionality into romstageSridhar Siricilla
The patch sets up the CSE Lite driver in the romstage instead of ramstage. With this change, CSE Lite driver sets CSE's boot partition and triggers CSE FW update in the romstage. The cse_fw_sync() must be called after DRAM initialization as HMRFPO_ENABLE HECI command (which is used by cse_fw_sync()) is expected to be executed after DRAM initialization. With this change, it improves the cold boot time by ~154ms. Test=Verified on JSL and TGL platforms BUG=b:174694480 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2fd562a5c6c8501226abbcb68021d9356bcf0b73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48279 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/inte/common: Replace #if macro with if C-language constuctSridhar Siricilla
This patch modifies CSE Lite driver to use 'if' C-lanugage construct instead of #if macro and adds 'if SOC_INTEL_CSE_RW_UPDATE' to the prompts of CSE Update related KConfigs to prevent appearing them in the menu. TEST=Built the code for drawcia Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Iecd5cf56ecd280de920f479e174762fe6b4164b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/common: Check sizes of CSE CBFS RW blob and CSE RW BPSridhar Siricilla
The patch triggeres CrOS recovery mode if the sizes of CSE CBFS RW blob and CSE RW boot are different. TEST=Verified on drawcia. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I8be589eae905b1a54a8cf981ccd3a00bd5e733f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48423 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/braswell: Use Kconfig value for TSEG sizeAngel Pons
SoC selects HAVE_SMI_HANDLER, so TsegSize is always set to 8 MiB. Also, use SMM_TSEG_SIZE in place of a magic number. Change-Id: I139e1073426051fea5d30b6ce3dd9746e0e985a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/braswell: Clean up devicetree settingsAngel Pons
Remove unreferenced settings and factor out common settings. Many of these are not mainboard-specific, and all boards use the same value. Change-Id: Iecae61994a068e8022638a2ad9ca10174427f0a4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48577 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop always-zero ProbelessTrace dt settingAngel Pons
This seems to be a debugging option. Since unset devicetree options default to zero, drop the setting. If it is needed in the future, a user-visible Kconfig option would probably make more sense. Change-Id: I0a71bc407fa92da3dcc0e3dbd666438d4280ffcb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop always-zero PowerLimit4 dt settingAngel Pons
Unset devicetree settings default to zero, so the devicetree setting can be removed. Looks like no one needs it anyway. Change-Id: Iad94538c5465347b37a99c6c9f20988168661593 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop never-set DdrFreqLimit dt settingAngel Pons
Only Google Eve uses a non-zero value, but it overwrites in C code. Drop the devicetree setting, since no mainboard uses it. Change-Id: I14e0e0cb9baa2b1f8f795e6bc6ffbee300f2243d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48574 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/xeon_sp/skx: Hook up microcode blobArthur Heymans
TESTED on ocp/tiagopass: Microcode updates are properly applied (via FIT). Tested with out of tree patches to report the revision. Change-Id: I05ddc64090424aa333848d9a0f54f21538faf94c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-14soc/intel/skylake: Drop unreferenced PttSwitch dt settingAngel Pons
The value for this setting is not used anywhere. Drop it. Change-Id: I75f6cdec6c69b374a07519bf9058b8f6e4916307 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: I76aa2327d440394a9176c023bc95fb34e713741e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48571 Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/xeon_sp: Configure DPR on all stacksArthur Heymans
Configure DPR to span the region between cbmem_top and TSEG base. This region was already unavailable to the OS. Change-Id: Ia0d34e50b3d577f19172619156352534f740ea6b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-14drivers: Replace multiple fill_lb_framebuffer with single instancePatrick Rudolph
Currently it's not possible to add multiple graphics drivers into one coreboot image. This patch series will fix this issue by providing a single API that multiple graphics drivers can use. This is required for platforms that have two graphic cards, but different graphic drivers, like Intel+Aspeed on server platforms or Intel+Nvidia on consumer notebooks. The goal is to remove duplicated fill_fb_framebuffer(), the advertisment of multiple independent framebuffers in coreboot tables, and better runtime/build time graphic configuration options. Replace all duplications of fill_fb_framebuffer and provide a single one in edid_fill_fb.c. Should not change the current behaviour as still only one graphic driver can be active at time. Change-Id: Ife507f7e7beaf59854e533551b4b87ea6980c1f4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39003 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/tigerlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: I5f5da8dfcec7dd35981611830b555cab5d6af3e3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48572 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/jasperlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: I40eba4128f1c5bafc7023b28dbaf40c0aca3f490 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14soc/intel/icelake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: I6ce43071c95eeb41c35ddfdb734db52d863ea8e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14soc/intel/elkhartlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: Ia928c4bbddd1c160228a9af8faf5d4be787f73f8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14soc/intel/cannonlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: Ia9c8347cad479c6b4e678630921f768e0fdee6d9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14soc/intel/alderlake: Drop unreferenced devicetree settingsAngel Pons
No mainboard uses these settings, nor does SoC code. Drop them. Change-Id: Ib4cf88a482f840edf16e2ac42e6ab61eccfba0aa Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-14intel/common/block/lpc: Add new device IDs for Emmitsburg PCHJonathan Zhang
Add LPC/eSPI device ID of Emmitsburg (EMB) for setting LPC resources. Refer to Emmitsburg PCH EDS (606161). Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: Ie5a5d9ba7e4f664ada2dae2294d6e4d0280a2157 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-14soc/intel/elkhartlake: Update IRQ routing settingsTan, Lean Sheng
Update IRQ routing settings. Extra reference: - ACPI spec 6.2.13 _PRT Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I53feeab81e82c539fa8e39bf90d3f662f75e6d53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-12-14soc/intel/elkhartlake: Update USB & PCIe devices in ASL filesTan, Lean Sheng
Update USB & PCIe devices in ASL files as per EHL EDS. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I8b567127fbdd880ccc0a5e0ca334162f9f4f5164 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48542 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-12-14soc/intel/elkhartlake: Update USB_PORT_MID pin settingsTan, Lean Sheng
Update Pre-emphasis, Transmitter Emphasis & Preemphasis Bias values for USB_PORT_MID. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I43eeb0fc410197a559df97b340135fac65c00aa5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48541 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/elkhartlake: Update SerialIO devices detailsTan, Lean Sheng
Add I2C #6 & #7 and remove GSPI #3 as per EHL EDS. Also update device function number for GSPI #2 in asl file. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: If166fefe567a857ca29527d0367197139efbf6c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48540 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/elkhartlake: Update HECI Control Status Register settingsTan, Lean Sheng
For EHL, SpiProtectionMode is added to HFSTS register #1. The original Manufacturing Mode is detected via FpfSocConfigLock instead. If FpfSocConfigLock=1, means it is in Menufacturing Mode, and it is in EOM (End Of Manufacturing) when FpfSocConfigLock=0. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I9d1d004a6b5b276e33be80f02cd1197b88d379ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/48539 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-14soc/intel/elkhartlake: Update PCI device definitionTan, Lean Sheng
This change updates PCI device definition according to EHL EDS. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: Ibf7ef3c30deab5398361bc18fc63ac39fc914d8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/48444 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11soc/intel/common/block/acpi: Skip UART debug table if not usedMarc Jones
Skip the ACPI UART debug table if common block UART isn't selected. Change-Id: I8d627998ca450c32496c90e51aad48f332b40e23 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48247 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-11soc/intel/common/block/lpc: Move southbridge_write_acpi_tables declarationMarc Jones
Move the southbridge_write_acpi_tables declaration from acpi.h to common lpc_lib.h, as common LPC is always the caller. This removes a duplicate declaration since all soc/intel devices use common LPC, but not all use common ACPI. The southbridge_write_acpi_tables function is defined in acpi.c with the other acpi functions. Note that this would have the reverse problem if there is ever a non-common LPC device. Change-Id: I0590a028b11f34e423d8f0007e0653037b0849a0 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48251 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/intel/tigerlake: Check TBT & TCSS ports for wake eventsTim Wawrzynczak
Wakes from TBT ports and TCSS devices will show up as PME_B0_STS wakes, so add checks for wakes from these devices in pch_log_pme_internal_wake_source. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ie9904c3c01ea85fcd83218fcfeaa4378b07c1463 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47396 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/intel/common: Adapt XHCI elog driver for reuseTim Wawrzynczak
Currently this XHCI driver assumes the PCH XHCI controller, but the TCSS or North XHCI block has a similar enough PCI MMIO structure to make this code mostly reusable. 1) Rename everything to drop the `pch_` prefix 2) xhci_update_wake_event() now takes in a pci_devfn_t for the XHCI controller 3) soc_get_xhci_usb_info() also now takes a pci_devfn_t for the XHCI controller BUG=b:172279037 TEST=plug in USB keyboard while in S0, enter S0ix and verify entry via EC; type on keyboard, verify it wakes up, eventlog contains: 39 | 2020-12-10 09:40:21 | S0ix Enter 40 | 2020-12-10 09:40:42 | S0ix Exit 41 | 2020-12-10 09:40:42 | Wake Source | PME - XHCI (USB 2.0 port) | 1 42 | 2020-12-10 09:40:42 | Wake Source | GPE # | 109 which verifies it still functions for the PCH XHCI controller Change-Id: I9f28354e031e3eda587f4faf8ef7595dce8b33ea Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47411 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-10soc/intel/xeon_sp/nvs: Use common global NVSMarc Jones
The xeon_sp ACPI NVS and ramstage NVS were out of sync. Since there isn't anything uncommon with the soc NVS, use the Intel common NVS. This covers the NVS cases of common code used by xeon_sp. Update the mainboards for this change. Change-Id: Icf422f5b75a1ca7a3d8f3d63638b8d86a56fdd7b Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2020-12-10mb/intel/ehlcrb: Add EHL CRB memory initialization supportTan, Lean Sheng
Update memory parameters based on memory type supported by Elkhart Lake CRB: 1. Update spd data for EHL LPDDR4X memory - DQ byte map - DQS CPU-DRAM map - Rcomp resistor - Rcomp target 2. Add configurations for vref_ca & interleaved memory 3. Add EHL CRB on board LPDDR4X SPD data bin file 4. Update mainboard related FSPM UPDs as part of memory initialization Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: Ifd85caa9ac1c9baf443734eb17ad5683ee92ca3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/48127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-12-10soc/intel/elkhartlake: Fix EHL mainboard build fail errorsTan, Lean Sheng
When EHL initial mainboard patch is uploaded, there are some build errors caused by EHL soc codes. Here are the fixes: 1. include gpio_op.asl to resolve undefined variables in scs.asl 2. remove unused variables in fsp_params.c 3. rearrage sequences of #includes to fix build dependency of soc/gpio_defs.h in intelblocks/gpio.h 4. add the __weak to mainboard_memory_init_params function 5. add the missing _len as per this patch changes https://review.coreboot.org/c/coreboot/+/45873 Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: Idaa8b0b5301742287665abde065ad72965bc62b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47804 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/intel/common/dmi: Add support for locking down SRLSrinidhi N Kaushik
This change adds support to lock down the DMI configuration in dmi_lockdown_cfg() by setting Secure Register Lock (SRL) bit in DMI control register. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I98a82ce4a2f73f8a1504e5ddf77ff2e81ae3f53f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48258 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/intel/common/dmi: Move DMI defines into DMI driver headerSrinidhi N Kaushik
Move definitions of DMI control register and Secure Register Lock (SRL) bit into common/block/dmi driver header file. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Iefee818f58f399d4a127662a300b6e132494bad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48257 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-09soc/intel/tigerlake: Enable support for extended BIOS windowFurquan Shaikh
This change enables support for extended BIOS window by selecting FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW and providing base and size of the extended window in host address space. BUG=b:171534504 Cq-Depend: chromium:2566231 Change-Id: I039155506380310cf867f5f8c5542278be40838a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-12-08soc/intel/common/fast_spi: Add Lockdown of extended BIOS regionSrinidhi N Kaushik
This change adds support to Lock down the configuration of extended BIOS region. This is done as part of fast_spi_lockdown_cfg() so that it is consistent with the other lockdown. Change includes: 1. New helper function fast_spi_lock_ext_bios_cfg() added that will basically set EXT_BIOS_LOCK. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I730fc12a9c5ca8bb4a1f946cad45944dda8e0518 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48068 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/fast_spi: Add support for configuring MTRRsSrinidhi N Kaushik
This change enables caching for extended BIOS region. Currently, caching is enabled for the standard BIOS region upto a maximum of 16MiB using fast_spi_cache_bios_region, used the same function to add the support for caching for extended BIOS region as well. Changes include: 1. Add a new helper function fast_spi_cache_ext_bios_window() which calls fast_spi_ext_bios_cache_range() which calls fast_spi_get_ext_bios_window() to get details about the extended BIOS window from the boot media map and checks for allignment and set mtrr. 2. Make a call to fast_spi_cache_ext_bios_region() from fast_spi_cache_bios_region (). 3. Add new helper function fast_spi_cache_ext_bios_postcar() which does caching ext BIOS region in postcar similar to 1. 4. If the extended window is used, then it enables caching for this window similar to how it is done for the standard window. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I9711f110a35a167efe3a4c912cf46c63c0812779 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47991 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08src/soc/intel/tigerlake: Add SPI DMI Destination IDSrinidhi N Kaushik
This change adds the SPI-DMI Destination ID for tigerlake soc. This is needed for enabling support for extended BIOS region. Also, implements a SOC helper function soc_get_spi_dmi_destination_id() which returns SPI-DMI Destination id. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I0b6a8af0c1e79fa668ef2f84b93f3bbece59eb6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-08soc/intel/common/fast_spi: Add extended decode window supportSrinidhi N Kaushik
This change enables support for configuration of extended BIOS region decode window. This configuration needs to be performed as early as possible in the boot flow. This is required to ensure that any access to the SPI flash region below 16MiB in coreboot is decoded correctly. The configuration for the extended BIOS window if required is done as part of fast_spi_early_init(). Changes include: 1. Make a call to fast_spi_enable_ext_bios() before the bus master and memory space is enabled for the fast SPI controller. 2. Added a helper function fast_spi_enable_ext_bios() which calls fast_spi_get_ext_bios_window() to get details about the extended BIOS window from the boot media map. 3. Depending upon the SPI flash device used by the mainboard and the size of the BIOS region in the flashmap, this function will have to perform this additional configuration only if the BIOS region is greater than 16MiB 4. Adddditionally, set up the general purpose memory range registers in DMI. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Idafd8be0261892122d0b5a95d9ce9d5604a10cf2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47990 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/dmi: Add DMI driver supportSrinidhi N Kaushik
This change allows configuring the General Purpose Memory Range(GPMR) register in BIOS to set up the decoding in DMI. This driver provides the following functionality: 1. Add a helper function dmi_enable_gpmr which takes as input base, limit and destination ID to configure in general purpose memory range registers and then set the GPMR registers in the next available free GMPR and enable the decoding. 2. Add helper function get_available_gpmr which returns available free GPMR. 3. This helper function can be utilized by the fast SPI driver to configure the window for the extended BIOS region. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I34a894e295ecb98fbc4a81282361e851c436a403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47988 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08coreboot tables: Add SPI flash memory map windows to coreboot tablesFurquan Shaikh
This change adds details about the memory map windows to translate addresses between SPI flash space and host address space to coreboot tables. This is useful for payloads to setup the translation using the decode windows already known to coreboot. Until now, there was a single decode window at the top of 4G used by all x86 platforms. However, going forward, platforms might support more decode windows and hence in order to avoid duplication in payloads this information is filled in coreboot tables. `lb_spi_flash()` is updated to fill in the details about these windows by making a call to `spi_flash_get_mmap_windows()` which is implemented by the driver providing the boot media mapping device. BUG=b:171534504 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I00ae33d9b53fecd0a8eadd22531fdff8bde9ee94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48185 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/systemagent: Reserve window used for extended BIOS decodingFurquan Shaikh
This change reserves the window used for extended BIOS decoding as a fixed MMIO resource using read_resources callback in systemagent driver. This ensures that the resource allocator does not allocate from this window. Additionally, this window is also marked as fixed memory region in _CRS for PNP0C02 device. BUG=b:171534504 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I42b5a0ebda2627f72b825551c566cd22dbc5cca7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-08soc/intel/common/fast_spi: Add custom boot media deviceFurquan Shaikh
This change enables support for a custom boot media device in fast SPI controller driver if the platform supports additional decode window for mapping BIOS regions greater than 16MiB. Following new Kconfigs are added: 1. FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW: SoC can select this to indicate support for extended BIOS window. 2. EXT_BIOS_WIN_BASE: If FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW is selected, this provides the base address of the host space that is reserved for mapping the extended window. 3. EXT_BIOS_WIN_SIZE: If FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW is selected, this provides the size of the host space reserved for mapping extended window. If platform indicates support for extended BIOS decode window, cbfstool add command is provided additional parameters for the decode window using --ext-win-base and --ext-win-size. It is the responsibility of the mainboard fmap author to ensure that the sections in the BIOS region do not cross 16MiB boundary as the host space windows are not contiguous. This change adds a build time check to ensure no sections in FMAP cross the 16MiB boundary. Even though the platform supports extended window, it depends upon the size of BIOS region (which in turn depends on SPI flash size) whether and how much of the additional window is utilized at runtime. This change also provides helper functions for rest of the coreboot components to query how much of the extended window is actually utilized. BUG=b:171534504 Change-Id: I1b564aed9809cf14b40a3b8e907622266fc782e2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-08soc/intel/cannonlake: Restore alphabetical order of Kconfig selectsFelix Singer
Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I5fa1e7216f3e80de0da5a58b84f221af321e4753 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48396 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/cannonlake: Align SATA mode names with soc/sklFelix Singer
Align the SATA mode names with soc/skl providing a consistent API. Built clevo/l140cu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I54b48462852d7fe0230dde0c272da3d12365d987 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-08soc/intel/skylake: Shorten SATA mode enum value namesFelix Singer
The Skylake FSP isn't used by coreboot anymore. Therefore, drop the misleading comment and the "KBLFSP" extension from the names of these enums. Also, drop the "MODE" extension to make their names shorter in general, since it doesn't add any more value. Built clevo/n130wu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: If37d40e4e1dfd11e9315039acde7cafee0ac60f0 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48377 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/skylake: Restore alphabetical order of Kconfig selectsFelix Singer
Built clevo/n130wu with BUILD_TIMELESS=1, coreboot.rom remains identical. Change-Id: I6a5c694a9686a5435aa5c64647286a6017f9aa13 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48376 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08commonlib/region: Allow multiple windows for xlate_region_devFurquan Shaikh
This change updates the translated region device (xlate_region_dev) to support multiple translation windows from the 1st address space to 2nd address space. The address spaces described by the translation windows can be non-contiguous in both spaces. This is required so that newer x86 platforms can describe memory mapping of SPI flash into multiple decode windows in order to support greater than 16MiB of memory mapped space. Since the windows can be non-contiguous, it introduces new restrictions on the region device ops - any operation performed on the translated region device is limited to only 1 window at a time. This restriction is primarily because of the mmap operation. The caller expects that the memory mapped space is contiguous, however, that is not true anymore. Thus, even though the other operations (readat, writeat, eraseat) can be updated to translate into multiple operations one for each access device, all operations across multiple windows are prohibited for the sake of consistency. It is the responsibility of the platform to ensure that any section that is operated on using the translated region device does not span multiple windows in the fmap description. One additional difference in behavior is xlate_region_device does not perform any action in munmap call. This is because it does not keep track of the access device that was used to service the mmap request. Currently, xlate_region_device is used only by memory mapped boot media on the backend. So, not doing unmap is fine. If this needs to be changed in the future, xlate_region_device will have to accept a pre-allocated space from the caller to keep track of all mapping requests. BUG=b:171534504 Change-Id: Id5b21ffca2c8d6a9dfc37a878429aed4a8301651 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47658 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-08soc/intel/common/gpio_defs: Add PAD_TRIG(OFF) in PAD_CFG_GPI_GPIO_DRIVERKaiyen Chang
Probabilistic interrupt storm is observed while kernel is configuring the GPIO for SD card CD pin. The root cause is that the macro PAD_CFG_GPI_GPIO_DRIVER isn't configuring trigger as PAD_TRIG(OFF). The way GPIO interrupts are handled is: 1. Pad is configured as input in coreboot. 2. Pad IRQ information is passed in ACPI tables to kernel. 3. Kernel configures the required pad trigger. Therefore, PAD_TRIG(OFF) should be added in PAD_CFG_GPI_GPIO_DRIVER to turn off the trigger while pad is configured as input in coreboot and then let kernel to configure the required pad trigger. BUG=b:174336541 TEST=Run 1500 reboot iterations successfully without any interrupts storm. Signed-off-by: Kaiyen Chang <kaiyen.chang@intel.corp-partner.google.com> Change-Id: Icc805f5cfe45e5cc991fb0561f669907ac454a03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2020-12-08soc/intel/common/usb4: Add ADL-P DMA0/1 ID into USB4 common codeSubrata Banik
Change-Id: Id014828d282350bcb1f4de295d5cfb72b6950634 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-08soc/intel/common/block/cpu/car: Fix two whitespace issuesSubrata Banik
This patch removes 1 unnecessary whitespace and add 1 whitespace into IA common car code block. Change-Id: I3690b5f219f5326cfca7956f21132062aa89648e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-07soc/intel/skl: set PEG port state to autoMichael Niewöhner
Setting PegXEnable to 1, statically enables the PEG ports, which blocks the SoC from going to deeper PC states. Instead, set the state to "auto" (2), so the port gets disabled, when no device was detected. Note: Currently, this only works with the AST PCI bridge disabled or the VGA jumper set to disabled on coreboot, while it works on vendor in any case. The reason for this is still unclear. Test: powertop on X11SSM-F shows SoC in PC8 like on vendor firmware instead of just PC3 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I3933a219b77d7234af273217df031cf627b4071f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-07sb/intel/common: Modify CONFIG_LOCK_MANAGEMENT_ENGINE behaviorSridhar Siricilla
The patch modifies KConfig behaviour if CSE Lite SKU is integrated into the coreboot. When the CSE Lite SKU is integrated, the KConfig prevents writing to ME region but keeps read access enabled. Since CSE Lite driver checks the signature of RW partition to identify the interrupted CSE firmware update, so host must have read access to the ME region. Also, the patch modifies the KConfig's help text to reflect the change. When CSE Lite SKU is integrated, master access permissions: FLMSTR1: 0x002007ff (Host CPU/BIOS) EC Region Write Access: disabled Platform Data Region Write Access: disabled GbE Region Write Access: disabled Intel ME Region Write Access: disabled Host CPU/BIOS Region Write Access: enabled Flash Descriptor Write Access: disabled EC Region Read Access: disabled Platform Data Region Read Access: disabled GbE Region Read Access: disabled Intel ME Region Read Access: enabled Host CPU/BIOS Region Read Access: enabled Flash Descriptor Read Access: enabled BUG=b:174118018 TEST=Built and verified the access permissions. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I2f6677ab7b59ddce827d3fcaae61508a30dc1b28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2020-12-07common/block/cse: Rename cbfs_boot_load_file() to cbfs_load()V Sowmya
This patch renames the cbfs_boot_load_file() to cbfs_load() to avoid the build errors for cselite and align with the new changes to API https://review.coreboot.org/c/coreboot/+/39304 . Change-Id: I717f0a3291f781cc3cf60aae88e7479762ede9f9 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48291 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-05soc/intel/jasperlake: Add Acoustic noise mitigation configurationMaulik V Vaghela
This patch exposes acoustic noise mitigation related UPDs/configuration to be filled from devicetree. For each variant, we might have different values for various parameters. Filling it from devicetree will allow us to fill separate values for each board/variant. Note that since JasperLake only has one VR, we're only filling index 0 for slew rate and FastPkgCRampDisable. BUG=b:162192346 BRANCH=dedede TEST=code compilation is successful and values from devicetree are getting reflected in UPDs Change-Id: Id022f32acc3fd3fe62f78e3053bacdeb33727c02 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-05soc/intel/xeon_sp: Don't use common block acpi.hMarc Jones
Don't use the common block acpi.h when we aren't using the COMMON_ACPI config. Fixes a dependency build issue in an upcoming commit. Change-Id: I3b80f7bbdf81e594fdde5b750c666edd8ca7268d Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-12-05soc/intel/common/block/usb4: Add the PCI ID for ADLV Sowmya
This patch adds the PCI device ID for Alderlake CPU xHCI. Change-Id: I4074a81aa9be2ef3a0956da08bece32a613415ab Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-12-04soc/intel/alderlake: Align chipset.cb with pci_devs.hEric Lai
Refer pci_devs.h naming to align chipset.cb. Correct thc0, thc1 and add cnvi_bt. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iac33983dc12ed4e5b9257c50d82adc8e4e728ad6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48153 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04src/soc/intel/alderlake: Enable the PCH HDAV Sowmya
This patch enables the PCH HDA device based on the devicetree configuration. Change-Id: I1791b769f4ab41cf89d82cf59049a2980c6c1eb0 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48272 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04soc/intel/{skl,cnl}: add NMI_{EN,STS} registersMichael Niewöhner
Add NMI_EN and NMI_STS registers, so they can be configured for using NMI gpios. References: - CMP-LP: Intel doc# 615146-1.2 - CMP-H: Intel doc# 620855-002 - SPT-H: Intel doc# 332691-003 - SPT-LP: Intel doc# 334659-005 - CNP-H: Intel doc# 337868-002 Test: trigger NMI via gpio on Supermicro X11SSM-F did not work before but now makes the Linux kernel complain about a NMI. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I4d57ae89423bdaacf84f0bb0282bbb1c9df94598 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48091 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04soc/intel/common/block/gpio: add code for NMI enablingMichael Niewöhner
Especially server boards, like the Supermicro X11SSM-F, often have a NMI button and NMI functionality that can be triggered via IPMI. The purpose of this is to cause the OS to create a system crashdump from a hang system or for debugging. Add code for enabling NMI interrupts on GPIOs configured with PAD_CFG_GPI_NMI. The enabling mechanism is the same as SMI, so the SMI function was copied and adapted. The `pad_community` struct gained two variables for the registers. Also register the NMI for LINT1 in the MADT in accordance to ACPI spec. Test: Linux detects the NMI correctly in dmesg: [ 0.053734] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I4fc1a35c99c6a28b20e08a80b97bb4b8624935c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48090 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-04intel/common/block/gpio: only reset configured SMI instead of allMichael Niewöhner
Currently, when a SMI GPIO gets configured, the whole status register is get written back and thus, all SMIs get reset. Do it right and reset only the correspondig status bit of the GPIO to be configured. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Iecf789d3009011381835959cb1c166f703f1c0cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/48089 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03soc/intel/skylake: Add chipset devicetreeFelix Singer
Set most of the devices to off to keep current behaviour. Change-Id: Ic4dbd965c84c3679e42a181dea0e7e618c12fb97 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-03src: Remove redundant use of ACPI offset(0)Elyes HAOUAS
IASL version 20180927 and greater, detects Unnecessary/redundant uses of the Offset() operator within a Field Unit list. It then sends a remark "^ Unnecessary/redundant use of Offset" example: OperationRegion (OPR1, SystemMemory, 0x100, 0x100) Field (OPR1) { Offset (0), // Never needed FLD1, 32, Offset (4), // Redundant, offset is already 4 (bytes) FLD2, 8, Offset (64), // OK use of Offset. FLD3, 16, } We will have those remarks: dsdt.asl 14: Offset (0), Remark 2158 - ^ Unnecessary/redundant use of Offset operator dsdt.asl 16: Offset (4), Remark 2158 - ^ Unnecessary/redundant use of Offset operator Change-Id: I260a79ef77025b4befbccc21f5999f89d90c1154 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43283 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-03cbfs: Introduce cbfs_ro_map() and cbfs_ro_load()Julius Werner
This patch introduces two new CBFS API functions which are equivalent to cbfs_map() and cbfs_load(), respectively, with the difference that they always operate on the read-only CBFS region ("COREBOOT" FMAP section). Use it to replace some of the simple cases that needed to use cbfs_locate_file_in_region(). Change-Id: I9c55b022b6502a333a9805ab0e4891dd7b97ef7f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39306 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02cbfs: Simplify load/map API names, remove type argumentsJulius Werner
This patch renames cbfs_boot_map_with_leak() and cbfs_boot_load_file() to cbfs_map() and cbfs_load() respectively. This is supposed to be the start of a new, better organized CBFS API where the most common operations have the most simple and straight-forward names. Less commonly used variants of these operations (e.g. cbfs_ro_load() or cbfs_region_load()) can be introduced later. It seems unnecessary to keep carrying around "boot" in the names of most CBFS APIs if the vast majority of accesses go to the boot CBFS (instead, more unusual operations should have longer names that describe how they diverge from the common ones). cbfs_map() is paired with a new cbfs_unmap() to allow callers to cleanly reap mappings when desired. A few new cbfs_unmap() calls are added to generic code where it makes sense, but it seems unnecessary to introduce this everywhere in platform or architecture specific code where the boot medium is known to be memory-mapped anyway. In fact, even for non-memory-mapped platforms, sometimes leaking a mapping to the CBFS cache is a much cleaner solution than jumping through hoops to provide some other storage for some long-lived file object, and it shouldn't be outright forbidden when it makes sense. Additionally, remove the type arguments from these function signatures. The goal is to eventually remove type arguments for lookup from the whole CBFS API. Filenames already uniquely identify CBFS files. The type field is just informational, and there should be APIs to allow callers to check it when desired, but it's not clear what we gain from forcing this as a parameter into every single CBFS access when the vast majority of the time it provides no additional value and is just clutter. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib24325400815a9c3d25f66c61829a24a239bb88e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39304 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02cbfs: Enable CBFS mcache on most chipsetsJulius Werner
This patch flips the default of CONFIG_NO_CBFS_MCACHE so the feature is enabled by default. Some older chipsets with insufficient SRAM/CAR space still have it explicitly disabled. All others get the new section added to their memlayout... 8K seems like a sane default to start with. Change-Id: I0abd1c813aece6e78fb883f292ce6c9319545c44 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-02soc/intel/common/cse: Perform cse_fw_sync on BS_PRE_DEVICE entryFurquan Shaikh
This change drops the special check added for TGL/JSL platforms and performs cse_fw_sync on BS_PRE_DEVICE entry. This was being done later in the boot process to ensure that the memory training parameters are written back to SPI flash before performing a reset for CSE RW jump. With the recent changes in CB:44196 ("mrc_cache: Update mrc_cache data in romstage"), MRC cache is updated right away in romstage. So, CSE RW jump can be performed in BS_PRE_DEVICE phase. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I947a40cd9776342d2067c9d5a366358917466d58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2020-12-02soc/intel/skylake: Fix compilation under x86_64Patrick Rudolph
Change-Id: I37382ab06a8f1760e955d1ec76a6a00958b05999 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48177 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02soc/intel/elkhartlake: Update KconfigTan, Lean Sheng
Update Kconfig: 1. use FSP2.1 instead of 2.2 2. remove HECI_DISABLE_USING_SMM config 3. update CAR related stack & ram size 4. update FSP heap size 5. set IED region size = 0 as it is not used 6. update SMM TSEG size 7. update RP & I2C max device #s 8. update UART base address Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: I6a44d357d71be706f402a6b2a4f2d4e7c0eeb4a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45078 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02soc/intel/skylake: Map VBIOS IDsPaul Menzel
The extracted VBIOS Option ROM ships the same ID for several generations, not matching the ID on the hardware resulting in a mismatch, and coreboot does not run the Option ROM. PCI ROM image, vendor ID 8086, device ID 0406, ID mismatch: vendor ID 8086, device ID 5916 Add the appropriate mappings. TEST=coreboot runs the ROM on the TUXEDO Book BU1406. Change-Id: Ia167d91627a7ff1b329ea75f150b3ce95c0acccb Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43853 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01soc/intel/common/block/smm/smihandler: Fix compilation under x86_64Patrick Rudolph
Change-Id: Ie44ded11a6a9ddd2a1163d2f57dad6935e1ea167 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-01soc/intel/common/block/cpu/car/exit_car: Fix compilation on x86_64Patrick Rudolph
Change-Id: Ieac4a4924ff4684b2a419471cd54e3d3b1f5bbe6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48171 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01soc/intel/common/block/cpu/car/cache_as_ram: Add x86_64 supportPatrick Rudolph
Doesn't affect x86_32. Tested on Intel Skylake. Boots into bootblock and console is working. Change-Id: I1b36ca8816dab9d30754aadd230c136978e3b344 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48170 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-01soc/intel/common/block/systemagent: Fix compilation on x86_64Patrick Rudolph
Change-Id: Ibc8dc1cf33f594284edb82d4730967e077739c3c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-30soc/intel/skylake: Fix commentFelix Singer
mainboard_silicon_init_params() is *not* meant for configuring GPIOs. It should only be used to configure FSP options, which can not be configured elsewhere. Change-Id: Ia92d0d173af9c67600e93b473480967304772998 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48008 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30soc/intel/alderlake: Add initial chipset.cbTim Wawrzynczak
Similar to the chipset.cb for TGL, this patch gives alias names to all of the published PCI devices. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6576ef4237c1fc8439795ad5b64b1840504edf73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48009 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-30soc/intel/tigerlake: Add some helper macros for accessing TCSS DMA devicesTim Wawrzynczak
Change-Id: I6289d2049fbbb6bb532be3d9e2355c563ec98d1b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-11-30lp4x: Add new memory parts and generate SPDsNick Vaccaro
Add MT53D512M64D4NW-046 WT:F memory part to LP4x global list of available LP4x parts and to the global JSON file containing LP4x parts and their characteristics. BUG=b:172993397 TEST=none Change-Id: I09c6eab640c169dbdb451964967d14a31e314496 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Rob Barnes <robbarnes@google.com>
2020-11-29soc/intel: Configure P2SB before other PCH controllersFurquan Shaikh
This change updates bootblock_pch_early_init() to perform P2SB configuration before any other PCH controllers are initialized. This is done because the other controllers might perform PCR settings which requires the PCR base address to be configured. As the PCR base address configuration happens during P2SB initialization, this change moves the p2sb init calls before any other PCH controller initialization. BUG=b:171534504 Change-Id: I485556be003ff5338b4e2046768fe4f6d8a619a3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47885 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-29soc/intel/alderlake: Add lp5_ccc_config to the board memory configurationSridhar Siricilla
TEST=Able to pass LPDDR5 MRC training with Lp5CccConfig override. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I24b1cf50c1b0b945fce75239bac38e40aeb8a83a Reviewed-on: https://review.coreboot.org/c/coreboot/+/47436 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-28soc/intel/skl: correct OC pin skip value for disabled usb portsMichael Niewöhner
Commit 056d552 introduced a bug where 0xFF gets set as OC pin value to supposedly skip programming an OC pin for a disabled USB port. While the value is correct for the other platforms, Skylake uses 0x08 for this purpose. Correct this by using the enum value OC_SKIP (0x08) instead. Change-Id: I41a8df3dce3712b4ab27c4e6e10160b2207406d1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-11-27soc/intel/jasperlake: Enable VT-d and generate DMAR TableMeera Ravindranath
Update UPDs required for the creation of DMAR table. By default coreboot was not generating DMAR table for IOMMU which was resulting in below error message in kernel: DMAR: [Firmware Bug]: No DRHD structure found in DMAR table DMAR: No DMAR devices found These changes will publish DMAR table through ACPI and will not result in the above error. BUG=b:170261791 BRANCH=dedede TEST=Build Dedede, boot to kernel and check dmesg if DMAR table exists. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I97a9f2df185002a4e58eaa910f867acd0b97ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/47506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-11-25soc/intel/{broadwell,quark}: Drop `PEI_DATA` typedefAngel Pons
It is not used. Change-Id: I3ef0878811bf2ec406ded03aac6c5dfeb5bf45a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47001 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-24soc/intel/xeon_sp: Enable SMI handlerRocky Phagura
SMI handler was not installed for Xeon_sp platforms. This enables SMM relocation and SMI handling. TESTED: - SMRR are correctly set - The save state revision is correct (0x00030101) - SMI's are properly generated and handled - SMM MSR save state are not supported, so relocate SMM on all cores in series - Verified on OCP/Deltalake mainboard. NOTE: - Code for accessing a CPU save state is not working for SMMLOADERV2, so some SMM features like GSMI, SMMSTORE, updating the ACPI GNVS pointer are not supported. - This hooks up to some soc/intel/common like TCO and ACPI GNVS. GNVS is broken and needs to be fixed separately. It is unknown if TCO is supported. This might require a cleanup in the future. Change-Id: Iabee5c72f0245ab988d477ac8df3d8d655a2a506 Signed-off-by: Rocky Phagura <rphagura@fb.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46231 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-24soc/intel/xeon_sp: Select INTEL_COMMON_BLOCK_TCOArthur Heymans
TCO is configured by FSP. This mostly makes it possible to report TCO events in SMM if enabled. Change-Id: I4f81c7888e45ed01ee68b1d6e6a9986a4d735467 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47764 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-24soc/intel/xeon_sp: Hook up the PMC driverArthur Heymans
The soc code was already there but it was never linked. Change-Id: I75ee08dab524bc40f1630612f93cbd42025b6d4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47763 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-24soc/intel/skylake: Support NHLT 1ch DMICBenjamin Doron
Allows advertising support for a 1ch array DMIC in the NHLT table. Boards use the NHLT if a microphone is connected to the DSP. Tested on an Acer Aspire VN7-572G (Skylake-U) on Windows 10. A custom ALSA topology will be required for Linux. Change-Id: Idba3a714faab5ca1958de7dcfc0fc667c60ea7fd Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-24soc/intel/skylake: Use correct NHLT_PDM_DEV definitionBenjamin Doron
According to the NHLT specification[1], PDM_DEV is defined as "1" on Kabylake based platforms. coreboot currently sets it to "0" on all platforms. Add an entry to the enum and use it to define NHLT_PDM_DEV for Kabylake. "Device Type" will resume from "2" on all platforms, but entries are currently reserved. Tested on an Acer Aspire VN7-572G (Skylake-U), which has a 1ch array DMIC, on Windows 10. 1. https://01.org/sites/default/files/595976_intel_sst_nhlt.pdf Change-Id: Ifbc67228c9e7af7db5154d597ca8d67860cfd2ed Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45010 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-23soc/intel/cannonlake: Add ICC limits for CFL-S DT 4Angel Pons
TEST=Boot with an i3-9100F and see no vr_config errors. Change-Id: Ic62ef038ad11d147a38804f694d3e056611b96db Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47445 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-23soc/intel/denverton_ns: Hook up SMMSTOREAngel Pons
Tested on Intel Harcuvar CRB, SMMSTORE is now working. Change-Id: I996c7bf3b510a8f0a9d1bb7d945ce777b646448e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-11-23soc/intel/alderlake: Update UART0 GPIO as per latest schematicsSubrata Banik
UART0_RX: C8 -> H10 UART0_TX: C9 -> H11 GPIO PIN Mode: NF1 -> NF2 Change-Id: I7a193b67e22258ff600679f27955a37480ed3f0d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47847 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-23soc/intel/alderlake: Update DCACHE_BSP_STACK_SIZE and DCACHE_RAM_SIZESubrata Banik
According to the latest Alderlake Platform FSP Integration Guide, the minimum amount of stack needed for FSP-M is 512KiB. Change DCACHE_RAM_SIZE and DCACHE_BSP_STACK_SIZE to reflect that (plus 1KB previously determined empirically). TEST=Able to pass FSP-M MRC training on LPDDR5 SKU without any hang. Change-Id: Ic831ca9110a15fdb48ad31a7db396740811bf0f2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/alderlake: Fix overlapping memory address used for early GSPI2 and ↵Bora Guvendik
UART bars BAR address used during early initilization of GPSI 2 is overlapping with UART bar. //For GSPI2 this is the address calculated GSPI_BUS_BASE(0xFE030000,2)=0xFE032000 GSPI_BUS_BASE(bar, bus) ((bar) + (bus) * 4 * KiB) //overlaps with CONSOLE_UART_BASE_ADDRESS -> 0xfe032000 TEST=none Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I3249a91df8a2e319aff6303ef9400e74163afe93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-22soc/intel/tigerlake: Fix overlapping memory address used for early GSPI2 and ↵Bora Guvendik
UART bars BAR address used during early initilization of GPSI 2 is overlapping with UART bar. //For GSPI2 this is the address calculated GSPI_BUS_BASE(0xFE030000,2)=0xFE032000 GSPI_BUS_BASE(bar, bus) ((bar) + (bus) * 4 * KiB) //overlaps with CONSOLE_UART_BASE_ADDRESS -> 0xfe032000 Change-Id: Id9f2140a6dd21c2cb8d75823cc83cced0c660179 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-11-22soc/intel/xeon_sp: Work around FSP-T not respecting its own APIArthur Heymans
The CPX FSP-T does not respect the FSP2.x spec and uses registers where coreboot has its initial timestamp stored. If the initial timestamp is later than some other timestamps this messes up the timestamps 'cbmem -t' reports as it thinks they are a result from a timestamp overflow (reporting that it took 100k years to boot). TEST: The ocp/deltalake boots within the span of a lifetime. Change-Id: I4ba15decec22cd473e63149ec399d82c5e3fd214 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/block/pmclib.c: Properly guard apm_control()Arthur Heymans
This function is only properly implemented with SMM support. Change-Id: I9e0fc7433a9226825f5ae4903c0ff2e0162d86ac Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/common/pmc.c Don't implement a weak function that diesArthur Heymans
Buildtime failures are better than runtime failures. Change-Id: I5fe4c86a13dbabb839977010f129419e337e8281 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-11-22soc/intel/block/pmc: Only include the PCI driver when it is not hiddenArthur Heymans
On more recent Intel platforms FSP-S hides the PMC PCI device and the driver is broken for those devices so don't include it at all. Change-Id: I784be250698ec1c1e9b3b766cf1bcca55730c021 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 23:38:46 +0000