summaryrefslogtreecommitdiff
path: root/src/soc/intel/xeon_sp
AgeCommit message (Collapse)Author
2024-03-23soc/intel/xeon_sp/spr: Move XHCI code into southbridge folderPatrick Rudolph
Move the XHCI code into soc/intel/xeon_sp/ebg where it belongs. TEST=intel/archercity CRB Change-Id: I2206ec5426a0f922cfce0e2d968e6806d349a6b2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jincheng Li <jincheng.li@intel.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-03-23soc/intel/xeon_sp/spr: Drop unused definesPatrick Rudolph
Since there's no code using those defines drop them. TEST=intel/archercity CRB Change-Id: I507b08a62ebeae14a1e63f4340b0592605a32477 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81369 Reviewed-by: Jincheng Li <jincheng.li@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-03-22soc/intel/xeon_sp: Include soc_util.h in Xeon-SP common codesShuo Liu
Different SoC generations might have different FSP header files. It is recommended to put these uncommon header files in soc_util.h so that Xeon-SP codes refer to soc_util.h to include them in a clean way. TEST=intel/archercity CRB Change-Id: Icfc20921efe00bc69b0c16c665f65f5baae4c309 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81229 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-19soc/intel/xeon_sp: Drop RMRR entry for USBPatrick Rudolph
Drop RMRR entry for XHCI controller since it's not under BIOS control. There's no USB-PS/2 emulation done in SMM, hence it's not needed. TEST=intel/archercity CRB Change-Id: I5afd68371d71a00988fe0f8a6045ec5ce2adc6a1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81297 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-03-19soc/intel/xeon_sp: Drop uncore_fill_ssdtPatrick Rudolph
Let ACPI DSDT figure out by itself if a stack is enabled. Allows to drop uncore_fill_ssdt() on all platforms. TEST=intel/archercity CRB Change-Id: Ib9051d608147f2de228509ff6b13871ca3183979 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81273 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-03-19soc/intel/xeon_sp/spr: Enable 512 MMCONF buses by defaultPatrick Rudolph
As of now coreboot only supported one PCI segment group and thus the MMCONF size had to be limited to 256 buses on ibm/sbp1. Since the default FSP doesn't allow to disable unused IIO stacks a patched version had to be used. Those unused IIO stacks consume lots of PCI bus ranges, leaving no free buses for the secondary side behind PCI bridges. The IIO disable mechanism doesn't work after ACPI G3 exit and thus requires multiple reboots when the previous state was G3. Since coreboot now supports multi PCI segment groups enable 512 MMCONF buses on 4S platforms by default and drop the IIO stack disable UPDs on ibm/sbp1. This allows to boot faster without the need for a patched FSP. The use of multiple PCI segment groups might prevent legacy software from working properly, however the only board where multiple PCI segment groups are used uses u-root as default payload. TEST=Booted on ibm/sbp1 to ubuntu22.04 using two PCI segment groups. TEST=intel/archercity CRB Change-Id: I4e6e5eca1196d4ab50e43b4b58d24eca444ab519 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-03-19soc/intel/xeon_sp: Initial support for PCI multi segment groupsPatrick Rudolph
Add PCI enumeration support by reading the PCIeSegment reported in the FSP HOB and add it when creating the PCI domain for each stack. The PCI enumeration will be able to scan the additional PCI segment groups and properly handle those devices. TEST=Booted on ibm/sbp1 with multiple PCI segment groups enabled to ubuntu 22.04. TEST=intel/archercity CRB Change-Id: I0ba5e426123234979d746d3bdfc1ddfbd71c3447 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79878 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-19soc/intel/xeon_sp: Add SATC PCI segment group supportPatrick Rudolph
For every PCI segment group generate a new SATC header. Allows to generate proper ACPI code when multiple PCI segment groups are enabled. TEST=Booted on ibm/sbp1 with multiple PCI segment groups. Properly generates multiple SATC headers. TEST=intel/archercity CRB Change-Id: I93b8ee05a7e6798e034f7a5da2c6883f0ee7a0e5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-03-18soc/intel/xeon_sp/uncore_acpi: Fix debug printPatrick Rudolph
The DMAR entries of type "PCI" have no "Enumeration ID" and thus there's no need to print it. Drop all unused Enumeration IDs to simplify the code and debug prints. Document ID: Intel Virtualization Technology for Directed I/O Architecture Specification, Rev. 4.0, Order Number: D51397-015 TEST=intel/archercity CRB Change-Id: I009fbfb9f9d62855d351c5db2d3d88722b5dbfa2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81186 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-15treewide: Move stdlib.h to commonlibMaximilian Brune
This patch moves commonlib/stdlib.h -> commonlib/bsd/stdlib.h, since all code is BSD licensed anyway. It also moves some code from libpayloads stdlib.h to commonlib/bsd/stdlib.h so that it can be shared with coreboot. This is useful for a subsequent commit that adds devicetree.c into commonlib. Also we don't support DMA on arm platforms in coreboot (only libpayload) therefore `dma_malloc()` has been removed and `dma_coherent()` has been moved to architecture specific functions. Any architecture that tries to use `dma_coherent()` now will get a compile time error. In order to not break current platforms like mb/google/herobrine which make use of the commonlib/storage/sdhci.c controller which in turn uses `dma_coherent` a stub has been added to arch/arm64/dma.c. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I3a7ab0d1ddcc7ce9af121a61b4d4eafc9e563a8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/77969 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-03-14soc/intel/xeon_sp: Rewrite acpi_fill_dmarShuo Liu
Rewrite the function by iterating IOMMU (Input/Output Memory Management Unit) devices instead of iterating socket and stacks, which is more aligned to coreboot infrastructure. TEST=intel/archercity CRB coreboot DRHD generation is compared, the order of sections are changed as expected but the content is kept equvalient. Change-Id: I700513e05181303cf3f4effc793a872eb23340cb Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81228 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-14soc/intel/xeon_sp: Rewrite acpi_create_drhdShuo Liu
Obtain IOMMU (Input/Output Memory Management Unit) info and enumerate devices using device utils instead of FSP HOB interface, which might change across SoC generations and no ambiguity across multiple PCIe segments. TEST=intel/archercity CRB coreboot DRHD generation log no changes before and after Change-Id: Ic5c404899172a0e4fba2721b8e8ca6c1f0856698 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81227 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-14soc/intel/xeon_sp: Add utils to detect domain0 and stack0Shuo Liu
In Xeon-SP, the domain0, which is located at stack0, usually needs special handling due to the compatible devices on it (HEPT, IO-APIC and legacy IOs). This patch adds util function detect whether a give domain or stack is with such a role. TEST=intel/archercity CRB Change-Id: I2f26b4ac54091c24c554f17964502c364288aa40 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-03-14soc/intel/xeon_sp: Add domain role checking utilsShuo Liu
For Xeon-SP, there are 4 main domain roles (PCIe/CXL/IOAT/UBOX). This patch adds util function to check whether a given domain belongs to one of these roles, or a give device belongs to a domain of the specific role. TEST=intel/archercity CRB Change-Id: I6b31c29564c774c27e86f55749ca9eca057a0cfe Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-03-14soc/intel/xeon_sp: Use common _CRS code generationPatrick Rudolph
Drop SoC specific code and use generic implementation provided by pci_domain_fill_ssdt. TEST=Booted on IBM/SBP1 to Ubuntu 22.04. TEST=intel/archercity CRB Change-Id: I8b0bc2eb02569b5d74f8521d79e0af8fee880c80 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80796 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-03-14soc/intel/xeon_sp: Drop IIO_UDS argumentPatrick Rudolph
Use CONFIG_MAX_SOCKET instead of the IIO_UDS hob. Allows to drop the argument in Xeon-SP common layer. TEST=intel/archercity CRB Change-Id: I05ec127f2bf84d3c242c3b0bca9709a0a7a4b52b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81181 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-03-13Revert "soc/intel/xeon_sp: Rewrite acpi_create_drhd"Martin L Roth
This reverts commit 6995efbd1b986d0426ca513fd2e56771dd489f16. Reason for revert: Submitted out of order and broke the coreboot build: src/soc/intel/xeon_sp/uncore_acpi.c:275:6: error: call to undeclared function 'is_dev_on_domain0'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 275 | if (is_dev_on_domain0(iommu)) { | ^ src/soc/intel/xeon_sp/uncore_acpi.c:343:35: error: call to undeclared function 'is_dev_on_ioat_domain'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 343 | if (CONFIG(HAVE_IOAT_DOMAINS) && is_dev_on_ioat_domain(iommu)) { | ^ src/soc/intel/xeon_sp/uncore_acpi.c:423:4: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference] 423 | assert(vtd_mmio_cap != 0xffffffffffffffff); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^~~~~~~~~~~~~~~~~ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^~~~~~~~~~~~~~~~~~~~~~ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^~~~~~~~~~~~~~~~ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^~~~~~~~~~~~~~~~~~~~~ src/soc/intel/xeon_sp/uncore_acpi.c:423:4: note: consider using __builtin_trap() or qualifying pointer with 'volatile' src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^ src/soc/intel/xeon_sp/uncore_acpi.c:455:3: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference] 455 | assert(ptr); | ^~~~~~~~~~~ src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^~~~~~~~~~~~~~~~~ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^~~~~~~~~~~~~~~~~~~~~~ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^~~~~~~~~~~~~~~~ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^~~~~~~~~~~~~~~~~~~~~ src/soc/intel/xeon_sp/uncore_acpi.c:455:3: note: consider using __builtin_trap() or qualifying pointer with 'volatile' src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^ src/soc/intel/xeon_sp/uncore_acpi.c:540:7: error: call to undeclared function 'is_domain0'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 540 | if (is_domain0(dev_get_pci_domain(dev))) { | ^ src/soc/intel/xeon_sp/uncore_acpi.c:546:2: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference] 546 | assert(iommu0); | ^~~~~~~~~~~~~~ src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^~~~~~~~~~~~~~~~~ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^~~~~~~~~~~~~~~~~~~~~~ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^~~~~~~~~~~~~~~~ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^~~~~~~~~~~~~~~~~~~~~ src/soc/intel/xeon_sp/uncore_acpi.c:546:2: note: consider using __builtin_trap() or qualifying pointer with 'volatile' src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^ Change-Id: I8b66177119ea5f55913a16aae06a3dcb807c2c64 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-03-13Revert "soc/intel/xeon_sp: Rewrite acpi_fill_dmar"Martin L Roth
This reverts commit 6833e8c01afc2827f150135f3805dc71820ddaa4. Reason for revert: Submitted out of order and broke the coreboot build. src/soc/intel/xeon_sp/uncore_acpi.c:275:6: error: call to undeclared function 'is_dev_on_domain0'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 275 | if (is_dev_on_domain0(iommu)) { | ^ src/soc/intel/xeon_sp/uncore_acpi.c:343:35: error: call to undeclared function 'is_dev_on_ioat_domain'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 343 | if (CONFIG(HAVE_IOAT_DOMAINS) && is_dev_on_ioat_domain(iommu)) { | ^ src/soc/intel/xeon_sp/uncore_acpi.c:423:4: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference] 423 | assert(vtd_mmio_cap != 0xffffffffffffffff); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^~~~~~~~~~~~~~~~~ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^~~~~~~~~~~~~~~~~~~~~~ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^~~~~~~~~~~~~~~~ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^~~~~~~~~~~~~~~~~~~~~ src/soc/intel/xeon_sp/uncore_acpi.c:423:4: note: consider using __builtin_trap() or qualifying pointer with 'volatile' src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^ src/soc/intel/xeon_sp/uncore_acpi.c:455:3: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference] 455 | assert(ptr); | ^~~~~~~~~~~ src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^~~~~~~~~~~~~~~~~ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^~~~~~~~~~~~~~~~~~~~~~ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^~~~~~~~~~~~~~~~ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^~~~~~~~~~~~~~~~~~~~~ src/soc/intel/xeon_sp/uncore_acpi.c:455:3: note: consider using __builtin_trap() or qualifying pointer with 'volatile' src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^ src/soc/intel/xeon_sp/uncore_acpi.c:540:7: error: call to undeclared function 'is_domain0'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] 540 | if (is_domain0(dev_get_pci_domain(dev))) { | ^ src/soc/intel/xeon_sp/uncore_acpi.c:546:2: error: indirection of non-volatile null pointer will be deleted, not trap [-Werror,-Wnull-dereference] 546 | assert(iommu0); | ^~~~~~~~~~~~~~ src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^~~~~~~~~~~~~~~~~ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^~~~~~~~~~~~~~~~~~~~~~ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^~~~~~~~~~~~~~~~ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^~~~~~~~~~~~~~~~~~~~~ src/soc/intel/xeon_sp/uncore_acpi.c:546:2: note: consider using __builtin_trap() or qualifying pointer with 'volatile' src/include/assert.h:85:27: note: expanded from macro 'assert' 85 | #define assert(statement) ASSERT(statement) | ^ src/include/assert.h:56:7: note: expanded from macro 'ASSERT' 56 | if (!__build_time_assert(x) && !(x)) { \ | ^ src/include/assert.h:27:40: note: expanded from macro '__build_time_assert' 27 | (__builtin_constant_p(x) ? ((x) ? 1 : dead_code_t(int)) : 0) | ^ src/include/assert.h:105:2: note: expanded from macro 'dead_code_t' 105 | *(type *)(uintptr_t)0; \ | ^ Change-Id: If919d6fa578a82fbb6bc5e1fd2adf4e9f59cab95 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81232 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-03-13soc/intel/xeon_sp: Rewrite acpi_fill_dmarShuo Liu
Rewrite the function by iterating IOMMU (Input/Output Memory Management Unit) devices instead of iterating socket and stacks, which is more aligned to coreboot infrastructure. TEST=intel/archercity CRB coreboot DRHD generation is compared, the order of sections are changed as expected but the content is kept equvalient. Change-Id: I4c1cbf8d8fc93f746640efc3a82c539dcb3fdee2 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-03-13soc/intel/xeon_sp: Rewrite acpi_create_drhdShuo Liu
Obtain IOMMU (Input/Output Memory Management Unit) info and enumerate devices using device utils instead of FSP HOB interface, which might change across SoC generations and no ambiguity across multiple PCIe segments. TEST=intel/archercity CRB coreboot DRHD generation log no changes before and after Change-Id: Idcfa899c764ffe51db5ed202ead07ad7b6868864 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81048 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-13soc/intel/xeon_sp: Add device find utilsShuo Liu
For Xeon-SP, it's common pattern to find devices under specific socket, stack and domain. This patch adds util function for these operations. TEST=intel/archercity CRB Change-Id: I163eacae363334919fd66d571b7e0415e77bd52d Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-03-12soc/intel/xeon_sp: Rewrite acpi_create_satcShuo Liu
SATC is for RCiEPs (Root Complex Integrated EndPoints) but not limited to IOAT domains. Rewrite the func by iterating all domains and its RCiEPs. Currently the codes only support 1 PCIe segment. TEST=intel/archercity CRB coreboot SATC generation logs are unchanged before and after. Change-Id: I1dfc56ccf279b77cfab4ae3457aa8799d2d57a34 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Signed-off-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81049 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-12soc/intel/xeon_sp: Create CXL domainsShuo Liu
SPR CXL IIO stack is divided into 2 PCI domains. The 1st domain is a PCI domain with single bus number and PCIe RCiEPs (Root Complex Integrated End Points) on it. The 2nd domain is a CXL domain with remaining buses for CXL 1.0/1.1 end points and possible SR-IOV (Single Root IO Virtualizaton) VFs (Virtual Function) if any. TEST=intel/archercity CRB P.S. The SUT is not with CXL cards however we hope this refactor could be integrated first as an improvement of the design. Change-Id: I643bcfbae7b6e8cfe11c147cc89374bc6b4d5a80 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81099 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-09soc/intel/xeon_sp: Further share domain creation logics in Xeon-SPShuo Liu
With this patch, all domain creation logics are moved into the scope of attach_iio_stack/chip_common.c for the ease of maintenance and future SoC integration where the domain creation process for specific stack types might be overridden. TEST=intel/archercity CRB 1. Boot to CentOS 9 Stream Cloud. 2. Compare PCIe enumeration and ACPI table generation logs before and and after this patch, no changes. Change-Id: If06bb5ff41b5f04cef766cf29d38369c6022da79 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81098 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-07soc/intel/xeon_sp/spr: Fix IOAT resourcesPatrick Rudolph
Do not generate empty mem32 resources for CPMx or HQMx stacks. Switch existing arguments to make sure that base is bigger than limit to indicate that the resource is invalid. Change-Id: I679563e97c33c7ee35d402674972e55f521eafa8 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80793 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-07soc/intel/xeon_sp: Share numa.c among Xeon-SP platformsShuo Liu
NUMA will be supported by SPR and future generations. TEST=intel/archercity CRB Change-Id: I0d494f8e560059d9c8d5338cef9a6ffe34e59e26 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-03-07soc/intel/xeon_sp: Unshare UDK binding among Xeon-SP platformsJincheng Li
TEST=intel/archercity CRB Change-Id: I285549daad87fe1ad6e8a94853e0a92cd5930e04 Signed-off-by: Li, Jincheng <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81041 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-07soc/intel/xeon_sp: Add memory type check utilsShuo Liu
FSP memory type representations change across Xeon-SP SoCs. This patch adds type check utils to abstract the differences. TEST=intel/archercity CRB Change-Id: I2f5f3c0f16dc50bc739146e46afce2e5fbf4f62c Signed-off-by: Shuo Liu <shuo.liu@intel.com> Signed-off-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-03-06soc/intel/xeon_sp: Add ACPI namesPatrick Rudolph
Set the unused 'name' property of the domain device and store the ACPI name. Every IIO stack can have multiple domain devices, each owning a subset of the available bus range within the stack. The name will be used in future changes to generate ACPI names in SSDT code generation. It can also be used to identify the domain type by looking at the first two characters of the name. Change-Id: Ic4cc81d198fb88300394055682a3954bf22db570 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80792 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-03-05soc/intel/xeon_sp: Move MEM_ADDR_64MB_SHIFT_BITS to Xeon-SPShuo Liu
Move MEM_ADDR_64MB_SHIFT_BITS from FSP headers to Xeon-SP common layer to reduce the dependency. TEST=intel/archercity CRB Change-Id: I4e1a652ad58233f7514cb9b23813d75144b8d435 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-03-05drivers/intel/fsp: Work around multi-socket Xeon-SP pipe init bugArthur Heymans
Starting with Intel CPX there is a bug in the reference code during the Pipe init. This code synchronises the CAR between sockets in FSP-M. This code implicitly assumes that the FSP heap is right above the RC heap, where both of them are located at the bottom part of CAR. Work around this issue by making that implicit assumption done in FSP explicit in the coreboot linker script and allocation. TEST=intel/archercity CRB Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Shuo Liu <shuo.liu@intel.com> Change-Id: I38a4f4b7470556e528a1672044c31f8bd92887d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80579 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-03-05soc/intel/xeon_sp: Drop unused helper functionsPatrick Rudolph
Change-Id: Ib319643f6b0b91d8c5854da531e035d333f04d75 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80143 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-05soc/intel/xeon_sp: Drop code to locate the UBOX busPatrick Rudolph
Drop the code to retrieve the UBOX bus numbers. Only keep a minial function that works when called from socket0 to retrieve the bus for UBOX(1). Change-Id: I2b18f02f62b69ec7c73cd5665102cb6bfc6e64b5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80102 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-03-05soc/intel/xeon_sp/util: Enhance lock_pam0123Patrick Rudolph
- Only compile code in ramstage - Lock PAM on all sockets - Instead of manually crafting S:B:D:F numbers for each PCI device search for the devices by PCI vendor and device ID. This adds PCI multi-segment support without any further code modifications, since the correct PCI segment will be stored in the devicetree. Change-Id: Ic8b3bfee8f0d02790620280b30a9dc9a05da1be8 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-02-28soc/intel/xeon_sp/util: Locate PCU by PCI device IDPatrick Rudolph
Instead of manually crafting S:B:D:F numbers for each PCI device search for the devices by PCI vendor and device ID. This adds PCI multi-segment support without any further code modifications, since the correct PCI segment will be stored in the devicetree. Change-Id: I1dcad4ba3fbc0295d74e1bf832cce95f014fd7bf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80095 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-28soc/intel/xeon_sp: Locate PCU by PCI device IDPatrick Rudolph
Instead of manually crafting S:B:D:F numbers for each PCI device search for the devices by PCI vendor and device ID. This adds PCI multi-segment support without any further code modifications, since the correct PCI segment will be stored in the devicetree. Intel Document-ID: 735086 Intel Document-ID: 612246 Tested: On SPR 4S all PCU on all 4 sockets could be found and locked. Change-Id: I06694715cba76b101165f1cef66d161b0f896b26 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80093 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-23arch/x86/ioapic: use uintptr_t for IOAPIC base addressFelix Held
Use uintptr_t for the IOAPIC base parameter of the various IOAPIC- related functions to avoid needing type casts in the callers. This also allows dropping the VIO_APIC_VADDR define and consistently use the IO_APIC_ADDR define instead. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I912943e923ff092708e90138caa5e1daf269a69f Reviewed-on: https://review.coreboot.org/c/coreboot/+/80358 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
2024-02-23soc/intel/xeon_sp: Locate PCI devices by Ven/Dev IDPatrick Rudolph
Since the ACPI code is looking for VtdBars, that only appear on Vtd devices, search for the Vtd device in devicetree. With the previous commit the VtdBar is now exposed as a resource on the Vtd device and thus can easily be accessed and used. Drop the FSP HOB parsing and just use coreboot native functions. Allows the code to work with multiple PCI segment groups. Change-Id: I2c752dc595ac4c901f2b3a96718e256e413c76a7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-02-23soc/intel/xeon_sp: Add helper functionsPatrick Rudolph
Provide a helper function to locate PCI devices on a given socket by their PCI vendor and device IDs and functions to return information about the current device, like the corresponding stack and socket. In addition add functions to return "location" information, like stack and socket affiliation. This becomes handy when locating devices and generating ACPI code. Change-Id: I266360588548ba579f46b228c4d5b3ae6e39a029 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80094 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-02-23soc/intel/xeon_sp/uncore: Read VtdBarPatrick Rudolph
Read the VtdBar and add it to the resources of the host bridge PCI device. The BAR is already marked as PciResourceMem32 in the parent PCI domain. This allows easy probing for VTD devices with enabled VtdBars in the next commit, without the need to look up the stack HOB. Change-Id: Id579a94e653473f3dd0dccea6e33dc64f792d028 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-02-22soc/intel/xeon_sp: Print device path when reporting resourcesPatrick Rudolph
As there are multiple Vtd devices, print the path of each when reporting resource registers. Change-Id: I5d3a6484ed7c7b9760fce0f3a02a15ca26c2cbd2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80549 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-02-22soc/intel/xeon_sp: Align resources to 4KPatrick Rudolph
The lower bit of the BAR might be used for something else, like enable bits, so mask the lower 12 bits and align all base address to 4K. Confirmed that all BARs have a minimum alignment of 4K, so that masking the lower bits doesn't change the reported address. The alignment of the VTD BARs is: - VTD_MMCFG_BASE_CSR 64 MiB - VTD_MMIOL_CSR 1 MiB - VTD_NCMEM_BASE_CSR 64 MiB - VTD_TSEG_BASE_CSR 1 MiB - VTD_BAR_CSR 4 KiB Change-Id: I9a7b963c0074246616968dd15c147f4916297d59 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-02-22soc/intel/xeon_sp: Refactor IOAT compiler optimization outsShuo Liu
IOAT logics are optimized out for non-IOAT platforms where CONFIG(HAVE_IOAT_DOMAINS) as false. This patch puts CONFIG(HAVE_IOAT_DOMAINS) check together ahead of is_ioat_iio_stack_res() check in the corresponding if statement to fulfill the optimization outs. TEST=intel/archercity CRB Change-Id: I2d16c6ff5320bc9195a1033b6d55e3d997b19b88 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80683 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-21mb/ocp/*: Remove unused ACPI opregionArthur Heymans
The base for this region is a magic number and none for the fields are used, which likely means this was simply copied from a different firmware. Change-Id: I217bbd0b098cd15ef296854cc6262d651f11d10e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73183 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-20soc/intel/xeon_sp: Put SRAT util macros into Xeon-SP ACPI headerShuo Liu
Macros MAX_ACPI_MEMORY_AFFINITY_COUNT and MAX_SRAT_MEM_ENTRIES_PER_IMC are ACPI table specific, and could be used across Xeon-SP SoCs. This patch moves their definition from FSP header to Xeon-SP layer ACPI header. TEST=intel/archercity CRB Signed-off-by: Shuo Liu <shuo.liu@intel.com> Change-Id: I6c3a84b04a452bc8d4217947a7d12f050c94b56b Reviewed-on: https://review.coreboot.org/c/coreboot/+/80629 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-20soc/intel/xeon_sp: Use ACPI common flags in SRAT generationShuo Liu
Move the definition of SRAT memory flags (SRAT_ACPI_MEMORY_ENABLED and SRAT_ACPI_MEMORY_NONVOLATILE) from FSP header to ACPI common codes. TEST=intel/archercity CRB Signed-off-by: Shuo Liu <shuo.liu@intel.com> Change-Id: I6aa5c20c9556fd5d680406518d19a83801b0852c Reviewed-on: https://review.coreboot.org/c/coreboot/+/80630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-02-20soc/intel/xeon_sp: Add support for is_ioat_iio_stack_resShuo Liu
IOAT is the term for the on-chip accelerator technology of Xeon-SP. In CPX and SPR, IOAT stack is also named as DINO stack. Different SoC has different check criteria for IOAT stacks, this patch introduces an util function to abstract these differences as well as cleaning up the usage of names. TEST=intel/archercity CRB Change-Id: I376928ad89b68b294734000678dad6f070d3c97d Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80578 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-18soc/intel/xeon_sp/spr: Don't leak memoryPatrick Rudolph
Only call fill_pds() once to prevent leaking memory. Previously it was called for every active stack on every socket. Only call dump_pds() once to prevent spamming the console with the same information. Drop the return value since it's always returning success. Change-Id: Ifa9609e9da086dc9731556014ea9b320b270d776 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-02-18soc/intel/xeon_sp/uncore: Don't print uninitialized memoryPatrick Rudolph
The struct map_entry has two zero'd entries due to the ifdef being used. Do not read those entries and do not print those entries. Fixes a NULL string being printed along as the vendor and device ID of the PCI device. Change-Id: Id87ced76af552c0d064538f8140d1b78724fb833 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80546 Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-02-09acpi/acpi: Pass struct device to acpi_create_srat_gia_pciPatrick Rudolph
Instead of S:B:D:F numbers pass the struct device to acpi_create_srat_gia_pci and let it extract the information needed. This also adds support for PCI multi segment groups. Change-Id: Iafe32e98f0c85f14347695ccaa0225e43fad99e7 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80258 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-09soc/intel/xeon_sp/numa: Store pointer to devicePatrick Rudolph
Instead of a BDF number store a pointer to the device itself. Change-Id: I3fef93c5e54c8af792102bcd25364c43b554a5f0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-02-06soc/intel/xeon_sp/smihandler: Lock SMM_FEATURE_CONTROL on all socketsPatrick Rudolph
Remove hardcoded B:D:F numbers for the first socket and pass the PCI addresses to be locked within SMM by using the smm_pci_resource_store. This allows to lock down SMM on all sockets without knowing the actual bus topology or PCI segment group at compile time where the UBOX devices reside on. Tested: SMM is locked on all 4 sockets instead of just one. Change-Id: Ica694911384005681662d3d7bed354a60bf08911 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80247 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-05soc/intel/xeon_sp/bootblock: Fix out of order header filesJeremy Compostella
Change-Id: If0397f5cc8d0f4f1872bd37a001fe42e0c37ec96 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80301 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-01-31soc/intel/xeon_sp: Find VTD devices by PCI DEV IDPatrick Rudolph
Instead of manually crafting S:B:D:F numbers for every VTD device loop over the entire devicetree by PCI DEV IDs. This adds PCI multi-segment support without any further code modifications, since the correct PCI segment will be stored in the devicetree. Change-Id: I1c24d26e105c3dcbd9cca0e7197ab1362344aa96 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80092 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-01-31soc/intel/xeon_sp: Attach UBOX stacksPatrick Rudolph
Attach UBOX stacks on newer generation Xeon-SP. In order to use PCI drivers for UBOX devices, locating UBOX devices by vendor and device IDs and replacing device access by specifying S:B:D:F numbers, add a PCI domain for the UBOX stacks and let the PCI enumerator index all devices. Since there are no PCI BARs on the UBOX bus the PCI locator doesn't have to assign resources on those buses. Once all PCI devices on the UBOX stack can be located without knowing their UBOX bus number and PCI segment the Xeon-SP code can fully enable the multi PCI segment group support. Test: ibm/sbp1 (4S) is able to find all PCU devices by PCI ID. Change-Id: I8f9d52dd117364a42de1c73d39cc86dafeaf2678 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80091 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-01-31device/device.h: Rename busses for clarityArthur Heymans
This renames bus to upstream and link_list to downstream. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-01-31include/device/device.h: Remove CHIP_NAME() macroNicholas Sudsgaard
Macros can be confusing on their own; hiding commas make things worse. This can sometimes be downright misleading. A "good" example would be the code in soc/intel/xeon_sp/spr/chip.c: CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev, This appears as CHIP_NAME() being some struct when in fact these are defining 2 separate members of the same struct. It was decided to remove this macro altogether, as it does not do anything special and incurs a maintenance burden. Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0 Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Jakub Czapiga <czapiga@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-01-30soc/intel: Unify the definition of TCO registersMarek Maslanka
Move the definition of the TCO registers used in most boards to a separate file and use it consistently. Do not unify TCO for older incompatible platforms. BUG=b:314260167 TEST=none Change-Id: Id64a635d106cea879ab08aa7beca101de14b1ee6 Signed-off-by: Marek Maslanka <mmaslanka@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-01-29soc/intel/xeon_sp/spr: Create CXL ACPI resources only forShuo Liu
CXL IIO stacks When an IIO stack is connected with CXL cards, its bus range will be divided by a PCI host bridge object and a CXL host bridge object, otherwise, all its range will be owned by the PCI host bridge object. Accordingly, CXL ACPI resources should be only created when the IIO stack is connected with a CXL card. TEST=intel/archercity CRB Change-Id: I6c1b1343991bc73d90a433d959f6618bbf59532f Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80087 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-29device: Add a helper function to add a downstream busArthur Heymans
Adding downstream busses at runtime is a common pattern so add a helper function. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Ic898189b92997b93304fcbf47c73e2bb5ec09023 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-01-24soc/intel: Rename Makefiles from .inc to .mkMartin Roth
The .inc suffix is confusing to various tools as it's not specific to Makefiles. This means that editors don't recognize the files, and don't open them with highlighting and any other specific editor functionality. This issue is also seen in the release notes generation script where Makefiles get renamed before running cloc. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ib479b93b7d0b2e790d0495b6a6b4b4298a515d9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/80073 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-24soc/intel/xeon_sp/chip_common: Improve the domain IDPatrick Rudolph
Use a union to access the PCI domain ID. This will become handy in the following commits to gather meta-data from the domain ID. Change-Id: I5c371961768410167a571358f6f366847a259eb6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80099 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-22soc/intel/xeon_sp: Add IIO resources via SSDTArthur Heymans
There is no need to inject this code in DSDT. Just generating a _CRS Name in SSDT containing a resource template works well and reduces the need to sync up on names being used to return _CRS names in DSDT. TEST=intel/archercity CRB Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I691d7497dceb89619652e5523a29ea30a7b0fab8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-01-22soc/intel/xeon_sp: Scan and allocate resources on all stacksArthur Heymans
The code can now deal with stacks that have no resources so just hook them all up. Intel XEON-SP FSP reports all report the state of its stacks, which comprise of PCI root bridges and their respective resources, like PCI busses, IO and MEM resources, via HOB. Parsing all of those into native coreboot structures makes it possible to handle those in a more native fashion like use PCI drivers, native helper functions, ... As opposed parsing those structures again out of the HOB each time. This makes code reuse across the tree more feasible. An additional advantage is that Linux does not need to redo resource allocation since the one done by coreboot will be valid, which potentially decreases boot time. TEST=intel/archercity CRB Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Shuo Liu <shuo.liu@intel.com> Change-Id: Id72c6e4499e99df3b7ca821ab2893cbcc869dbcd Reviewed-on: https://review.coreboot.org/c/coreboot/+/78332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-01-22soc/intel/xeon_sp: Fix devicetree walking upPatrick Rudolph
Connect the PCI domain to the bus to allow walking the devicetree up. This is required to figure out which PCI domain a device belongs to. Change-Id: I8cc50cabf7ad540c52498e1ffe7f9246550ed87b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-01-17Reland "Kconfig: Bring HEAP_SIZE to a common, large value"Patrick Georgi
This reverts commit acbc4912375085a099c2427def464d6e481f2a90. Reason for revert: CB:79525 fixes the issue that led to the revert by not maintaining the heap in the SMM-stored copy of ramstage at all. Change-Id: I3c8ef785486d275c9341859d34fce12253bd2bb9 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80023 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-16device: Add support for multiple PCI segment groupsFelix Held
Add initial support for multiple PCI segment groups. Instead of modifying secondary in the bus struct introduce a new segment_group struct element and keep existing common code. Since all platforms currently only use 1 segment this is not a functional change. On platforms that support more than 1 segment the segment has to be set when creating the PCI domain. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ied3313c41896362dd989ee2ab1b1bcdced840aa8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/79927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2024-01-15soc/intel/xeon_sp: Redesign resource allocationArthur Heymans
The xeon_sp code worked around the coreboot allocator rather than using it. Now the allocator is able to deal with the multiple IIOs so this is not necessary anymore. Instead do the following: - Parse the FSP HOB information about IIO into coreboot PCI domains - Use existing scan_bus and read_resource - Handle IOAT stacks with multiple domains in soc-specific code TEST=intel/archercity CRB Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Shuo Liu <shuo.liu@intel.com> Change-Id: Idb29c24b71a18e2e092f9d4953d106e6ca0a5fe1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-01-12soc/intel/xeon_sp: Allocate resources above 4GArthur Heymans
This makes sure that prefetchable mem64 memory gets allocated above 4G which allows non prefetchable resources to be allocated in the tight window below 4G. TEST=intel/archercity CRB Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I27d4f9ce91c12ed4ab3b2f18f2a92b742115d275 Reviewed-on: https://review.coreboot.org/c/coreboot/+/79058 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-12-26soc/intel/xeon/spr: Enforce POR frequency settingNaresh Solanki
For RMT build, add kconfig option to enforce Plan Of Record restriction on DDR5 frequency & voltage settings. Change-Id: Ibfcaaf47fec3bd5d8a858309918b3af2f8d976e9 Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-11-07Revert "Kconfig: Bring HEAP_SIZE to a common, large value"Patrick Georgi
This reverts commit 44a48ce7a46c36df69f7b2cf3552bf10fa5f61b6. Reason for revert: It breaks wakeup from suspend on a bunch of boards. While this approach of eyeballing "correct" values by chipset _should_ be fixed, it should also be accompanied by compile time verification that the memory map works out. Since nobody seems to care enough, let's just revert this, instead of keeping the tree broken for a bunch of configurations. Change-Id: I3cd73b6ce8b15f06d3480a03ab472dcd444d7ccc Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78850 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-13soc/intel/xeon_sp/spr: Add SATA controllers 1 and 2 to devicetreeNaresh Solanki
The board has three SATA controllers, so add the remaining two on PCI device 18.0 and 19.0. TEST=Verify in lspci the sata controllers. Change-Id: Ia654c4ef895b52338554d89c25f61b262fbbcbbb Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77892 Reviewed-by: Annie Chen <chen.annieet@inventec.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2023-10-11Kconfig: Bring HEAP_SIZE to a common, large valuePatrick Georgi
We have a tiny HEAP_SIZE by default, except when we don't, and mainboards that override it, or not. Since memory isn't exactly at a premium these days, and unused heap doesn't cost anything extra, just crank it up to the highest value we have in the tree by default and remove all overrides. Change-Id: I918a6c58c02496e8074e5fba06e38d9cfd691020 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78270 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-25soc/intel/xeon_sp: Add HDA disable supportPatrick Rudolph
Currently the HDA device can neither be disabled using softstraps nor can it be disabled by using FSP UPDs. Add code to disable it in coreboot when it's marked as 'off' in coreboot's devicetree. TEST: Device 00:1f.3 is hidden and platform boots into OS without issue. Change-Id: Ifa1422d653cf81ee6faf2bdda27a471c2084642b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77873 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-15soc/intel/xeon_sp: Add missing HDA devicePatrick Rudolph
Change-Id: Icc7974931a9b3f5b5c7a2ed4df2c668dac0cd684 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-09-15xeon_sp/spr: Fix duplicated definesPatrick Rudolph
Change-Id: Ib365a17652b8531e865fa16eae837c68cbedbca8 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
2023-09-14soc/intel/xeon_sp/spr: Bump MAX_ACPI_TABLE_SIZE_KBPatrick Rudolph
When using Intel(R) Xeon(R) Platinum 8490H on IBM/SBP1 the platform runs with 480 cores. With 480 cores coreboot needs at least 440KiB for ACPI tables. Bump the config to 512 KiB to have some free space for future changes. Change-Id: I2c0bbc36f45aab921f3189459de4438a0cd5dd1f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
2023-09-04{drivers/intel/fsp2_0, soc/intel}: Rename `SAVE_MRC_AFTER_FSPS` configSubrata Banik
This patch renames `SAVE_MRC_AFTER_FSPS` config to `FSP_NVS_DATA_POST_SILICON_INIT` to highlight the violation in the Xeon SP FSP implementation, where the FSP Silicon Init API produces Non-Volatile Storage (NVS) instead of the FSP-Memory Init API. According to the FSP 2.x specification (section 11.3), the FSP populates the NVS data using the FSP_NON_VOLATILE_STORAGE_HOB and expects the boot firmware to parse the FSP_NON_VOLATILE_STORAGE_HOB after the FspMemoryInit() API in API mode. However, not all Intel SoC platforms that support the FSP 2.x specification adhere to this requirement. For example, the FSP binary for XEON SP platform produces NVS data (aka FSP_NON_VOLATILE_STORAGE_HOB) after the FspSiliconInit() API. Therefore, attempting to locate NVS data after the FspMemoryInit() API on these platforms would result in an error. The `save_mrc_data.c` implementation provides the required hooks to locate the NVS post FSP-Silicon Init and store into Non-Volatile Storage. BUG=b:296704537 TEST=Able to build and boot Intel Xeon SP w/o any functional impact. Change-Id: I815a64263fa1415bfe30bb3c1c35e4adee307e86 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-23soc/intel/xeon/spr: Improve RMT configurationNaresh Solanki
Set EnforceDdrMemoryFreqPor to 0 for RMT builds. This is needed for proper functioning when EnforcePopulationPor is set to 1. Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Change-Id: Icf4fe01ac9b546830334717dbfa53782d2a85ba1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-12soc/intel/xeon_sp/*/Kconfig: Refactor out and remove SOC_SPECIFIC_OPTIONSElyes Haouas
Move specific selections to {cpx,skx,spr} and remove dummy SOC_SPECIFIC_OPTIONS Change-Id: I71e41deb0478bf4d04395c88fc7b68df1ea83ac0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-09soc/intel/xeon_sp/spr: Add soc_config_iio to set IIO UPD from mainboardJohnny Lin
To deduplicate mainboard mainboard_config_iio since there are a few SPR-SP mainboards now. The flow would be soc function initialize_iio_upd initializes the table with the default values which are mostly zero, then mainboard can overwrite it by soc_config_iio. Change-Id: I72d74241fcad4c85a95f6d14587418f544caadd9 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76185 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-08-09soc/intel/xeon_sp/ebg: Add periodic SMI bits definitionMichał Żygowski
Change-Id: Ia906a115538964628958bb4b6e3de3aa71577cce Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76252 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-08ACPI: Add helper fill_fadt_extended_pm_io()Kyösti Mälkki
Once platform code has filled in the (legacy) ACPI PM register map, added function will fill in the extended entries in FADT. TEST=samsung/lumpy and amd/mandolin FADT stays unchanged. Change-Id: I90925fce35458cf5480bfefc7cdddebd41b42058 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-03soc/intel/xeon_sp/spr/Kconfig: Remove unused MAX_MC_CHNElyes Haouas
Change-Id: Ia4011a0f29d360fbe46a5e052e2acb3d23d8ceaf Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76695 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-03soc/intel/xeon_sp/Kconfig: Remove useless USE_FSP2_0_DRIVERElyes Haouas
Change-Id: Ic384ee804e217ba79f7e191f122ec61565abfc40 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-03soc/intel/xeon_sp/spr/Kconfig: Remove unused SIPI_FINAL_TIMEOUTElyes Haouas
Change-Id: I915e0e942adf33175fdc9fe055fce013824d6c0f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76698 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-25soc/intel/xeon/spr: Improve RMT configurationNaresh Solanki
Set AllowedSocketsInParallel to 1 for RMT builds. This help in associating any failures encountered during RMT run with the corresponding Socket/MC/DIMM. Intel recommended setting EnforcePopulationPor to 1 for RMT runs for debugging failures if any. Change-Id: Ie2301368e9470cc23171c3c4eca9fe978e1513d4 Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76679 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-07-20soc/intel/xeon_sp: use VGA_MMIO_* defines from arch/vga.hFelix Held
Now that we have x86 architecture specific VGA_MMIO_* defines in arch/vga.h, use those instead of having SoC-specific defines for this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I77b914d563bdc83e7fad7d7fccd5cf7777cb4918 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-07-18soc/intel/xeon_sp: Skip empty socketsPatrick Rudolph
The current Sapphire Rapids code assumes that all sockets have working CPUs. On multi-socket platforms a CPU might be missing or was disabled due to an error. The variable PlatformData.numofIIO and the variable SystemStatus.numCpus reflect the working CPUs, but not the actual socket count. Update the code to iterate over sockets until PlatformData.numofIIO IIOs have been found. This is required as FSP doesn't sort IIOs by working/non working status. This resolves invalid ACPI table generation and it fixes a crash as commands were sent to a disabled CPU. TEST: Disabled Socket1 on IBM/SBP1. Change-Id: I237b6392764bbdb3b96013f577a10a4394ba9c6e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76559 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/intel/xeon_sp: Use SocketID in NUMA table generationPatrick Rudolph
Use the actual SocketID instead of the running index. Change-Id: I9128909756d0dbb0c4dabc52acdc98cb2a4f7baa Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76558 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/intel/xeon_sp: Remove invalid commentPatrick Rudolph
The comment is only true if all sockets have working CPUs installed. Change-Id: I8c3376c9233c33fb770082573e07e9d96abb7855 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76557 Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-18soc/intel/xeon_sp: Introduce soc_cpu_is_enabledPatrick Rudolph
Add a function to check if the CPU placed at the specified socket was found usable during QPI init. This is useful for multi-socket platforms were a CPU is missing or has been disabled due to an error. Change-Id: I135968fcc905928b9bc6511e3ddbd7d12bad0096 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-18soc/intel/xeon_sp: Print HOB for all socketsPatrick Rudolph
Use the FSP define to iterate over all sockets as the runtime value of numofIIO is the detected number of sockets, not the highest working socket. This fixes printing the HOB on multi-socket platforms where a CPU has been removed or has been disabled (4S system running as 3S). Change-Id: Ieed67cd48d26c7634636c0aae6a56f3b6fbdf640 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76492 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-13soc/intel: Rename pcr.asl to pch_pcr.aslSubrata Banik
The PCR (Private Configuration Register) is applicable to access the P2SB register space starting with the Intel SkyLake generation of SoC. Prior to Intel Meteor Lake SoC generation, the only P2SB existed inside the PCH die. Starting with Meteor Lake SoC, there are two P2SB, one in SoC die (same as PCH die for U/H SoC) and another in IOE die. This patch renames pcr.asl to pch_pcr.asl to reflect the actual source of the P2SB IP in the die (i.e., SoC die or PCH die). BUG=b:290856936 TEST=Able to build and boot google/rex. Change-Id: Idb66293eaab01e1d4bcd4e9482157575fb0adf04 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76407 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-11soc/intel/xeon_sp: Clear reserved field in SRATNaresh Solanki
During the ACPI dump of the System Resource Affinity Table (SRAT), it was noticed that the reserved field within the Memory Affinity structure contained a non-zero value. This commit addresses the issue by performing a memset to zero on the reserved field, ensuring the avoidance of any potential problems arising from garbage values. TEST= Build for ibm/sbp1 & make sure SRAT Memory Affinity entries reserved fields read zeroes Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Change-Id: I4ba697a6bd59054e74c84b98f3d9b517d333a5d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75417 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2023-07-07soc/intel/xeon_sp/spr: Fix upd_display.c build errorJohnny Lin
Fix below build error after DISPLAY_UPD_DATA is selected: src/soc/intel/xeon_sp/spr/upd_display.c:131:29: error: variable 'old' set but not used [-Werror=unused-but-set-variable] 131 | const FSP_S_CONFIG *old; | ^~~ src/soc/intel/xeon_sp/spr/upd_display.c:130:29: error: variable 'new' set but not used [-Werror=unused-but-set-variable] 130 | const FSP_S_CONFIG *new; Change-Id: I43ed5fadab58e0d4dc824457c7a1bdf48511198e Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76342 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23commonlib/console/post_code.h: Change post code prefix to POSTCODElilacious
The prefix POSTCODE makes it clear that the macro is a post code. Hence, replace related macros starting with POST to POSTCODE and also replace every instance the macros are invoked with the new name. The files was changed by running the following bash script from the top level directory. sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \ src/commonlib/include/commonlib/console/post_codes.h; myArray=`grep -e "^#define POSTCODE_" \ src/commonlib/include/commonlib/console/post_codes.h | \ grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`; for str in ${myArray[@]}; do splitstr=`echo $str | cut -d '_' -f2-` grep -r POST_$splitstr src | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; grep -r "POST_$splitstr" util/cbfstool | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; done Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-15soc/intel: Add max memory speed into dimm infoEric Lai
Add MaximumMemoryClockSpeed if FSP have it, otherwise pass 0. TEST=check dmidecode dump the max speed. Handle 0x000C, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 16 GB Form Factor: SODIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR5 Type Detail: Unknown Synchronous Speed: 5600 MT/s Manufacturer: Micron Serial Number: 3f064d84 Asset Tag: Channel-0-DIMM-0-AssetTag Part Number: MTC8C1084S1SC56BG1 Rank: 1 Configured Memory Speed: 5200 MT/s Minimum Voltage: 1.1 V Maximum Voltage: 1.1 V Configured Voltage: 1.1 V Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I854474bce8d6ed02f47f6dce8585b3ddfae73f80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75810 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-15soc/intel/*/include/soc/pmc.h: Add missing periodic SMI rate bitsMichał Żygowski
Based on: - Apollo Lake datasheet Vol. 3 Revision 005: https://cdrdv2.intel.com/v1/dl/getContent/334819 - 7th Generation Intel Processor Families I/O for U/Y Platforms Datasheet Vol.2 August 2017: https://cdrdv2.intel.com/v1/dl/getContent/334659 - edk2-platforms source for Whitley and Purley platforms (Xeon SP) Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ic600d39d49135808dd1f571c9eff3cdb98682796 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
2023-06-14soc/intel/xeon_sp: Fix HEST table lengthJeff Li
"current" points to the start of HEST table, so "next - current" already includes the size of its header, no need for increment here. This issue was found on SPR-SP platform. The length of HEST table is now correct with this patch. Change-Id: I6ff1e8e24612b7356772d582ff9a7e53863419db Signed-off-by: Jeff Li <lijinfeng01@inspur.com> Signed-off-by: Ziang Wang <ziang.wang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75738 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 06:37:09 +0000