summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake/finalize.c
AgeCommit message (Collapse)Author
2017-11-30soc/intel/skylake: Set low maximum temperature threshold for Thermal DeviceSubrata Banik
PMC logic shuts down the thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold in case Dynamic Thermal Shutdown in S0ix is enabled. BUG=b:69110373 BRANCH=none TEST=Ensure Thermal Device(B0: D20: F2) TSPM offset 0x1c[LTT (8:0)] value is 0xFA. Change-Id: I94d09a28bf1ea07a53cfa04c54752358bafca610 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-03soc/intel/skylake: Enable common LPC IPRavi Sarawadi
Enable Skylake to use the new common LPC code. This will help to reduce code duplication and streamline code bring up. Change-Id: I042e459fb7c07f024a7f6a5fe7da13eb5f0dd688 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-26soc/intel/skylake: Move SPI lock down config after resource allocationBarnali Sarkar
This patch to ensures that coreboot is performing SPI registers lockdown after PCI enumeration is done. This requirements are intended to support platform security guideline where all required chipset registers are expected to be in lock down stage before launching any 3rd party code as in option rom etc. coreboot has to change its execution order to meet those requirements. Hence SPI lock down programming has been moved right after pci resource allocation is donei, so that SPI registers can be lock down before calling post pci enumeration FSP NotifyPhase() API which is targeted to be done in BS_DEV_ENABLE-BS_ON_ENTRY. TEST=Ensure SPIBAR+HSFSTS(0x04) register FLOCKDN bit and WRSDIS bit is set. Also, Bits 8-12 of SPIBAR+DLOCK(0x0C) register is set. Change-Id: I8f5a952656e51d3bf365917b90d3056b46f899c5 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/21064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-26soc/intel/skylake: Move DMI lock down config after resource allocationSubrata Banik
This patch to ensures that coreboot is performing DMI registers lockdown after PCI enumeration is done. This requirements are intended to support platform security guideline where all required chipset registers are expected to be in lock down stage before launching any 3rd party code as in option rom etc. coreboot has to change its execution order to meet those requirements. Hence BIOS Interface lock down through Sideband access has been moved right after pci resource allocation is done, so that BILD lock down is getting executed along with LPC and SPI BIOS interface lockdown settings before calling post pci enumeration FSP NotifyPhase() API which is targeted to be done in BS_DEV_ENABLE-BS_ON_ENTRY. TEST=Ensure DMI register offset 0x274c bit 0 is set. Change-Id: Ie66701d5bd8c8f389e23fb30c8595dd83cf6b1ae Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Remove TCO lock down programmingSubrata Banik
FSP is doing TCO lock inside Post PCI bus enumeration NotifyPhase(). Hence remove TCO Lock down programming from coreboot. TEST= Ensure TCO_LOCK offset 8 bit 12 is set. Change-Id: Iec9e3075df01862f8558b303a458126c68202bff Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21031 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Move PMC lock down config after resource allocationSubrata Banik
This patch to ensures that coreboot is performing PMC registers lockdown after PCI enumeration is done. This requirements are intended to support platform security guideline where all required chipset registers are expected to be in lock down stage before launching any 3rd party code as in option rom etc. coreboot has to change its execution order to meet those requirements. Hence PMC register lock down has been moved right after pci resource allocation is done, so that PMC registers can be lock down before calling post pci enumeration FSP NotifyPhase() API which is targeted to be done in BS_DEV_ENABLE-BS_ON_ENTRY. TEST=Ensure PMC MMIO register 0xC4 bit 31 is set. Change-Id: Ibd86a38fa78752ce007da63a9ccdd991ca21ab92 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Remove ABASE lock down programmingSubrata Banik
FSP is doing PMC ABASE lock inside Post PCI bus enumeration NotifyPhase(). Hence remove ABASE Lock down programming from coreboot. TEST= Ensure GEN_PMCON_B offset 0xA4 bit 17, 18 is set. Change-Id: I800e654c7d8dc55cc0e8299501c1f85c57882e9d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Move LPC lock down config after resource allocationSubrata Banik
This patch to ensures that coreboot is performing LPC registers lockdown after PCI enumeration is done. This requirements are intended to support platform security guideline where all required chipset registers are expected to be in lock down stage before launching any 3rd party code as in option rom etc. coreboot has to change its execution order to meet those requirements. Hence lpc register lock down has been moved right after pci resource allocation is done, so that lpc registers can be lock down before calling post pci enumeration FSP NotifyPhase() API which is targeted to be done in BS_DEV_ENABLE-BS_ON_ENTRY. TEST=Ensure LPC register 0xDC bit 1 and 7 is set. Change-Id: I705a3a3c6ddc72ae7895419442d67b82f541edee Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/skylake: Add LPC and SPI lock down config optionSubrata Banik
This patch to provide new config options to perform LPC and SPI lock down either by FSP or coreboot. Remove EISS bit programming as well. TEST=Build and boot Eve and Poppy. Change-Id: If174915b4d0c581f36b54b2b8cd970a93c6454bc Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-22soc/intel/skylake: Lock sideband access in coreboot and not in FSPBarnali Sarkar
The Sideband Acces locking code is skipped from FSP by setting an FSP-S UPD called PchSbAccessUnlock. This locking is being done in coreboot during finalize.c. This is done because coreboot was failing to disable HECI1 device using Sideband interface during finalize.c if FSP already locks the Sideband access mechanism before that. So, as a solution, coreboot passes an UPD to skip the locking in FSP, and in finalize.c, after disabling HECI, it removes the Sideband access. BUG=b:63877089 BRANCH=none TEST=Build and boot poppy to check lspci not showing Intel ME controller in the PCI device list. Change-Id: I8dba4c97480200507969b0f2873337f97bd2ff6a Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-07-21soc/intel/skylake: Perform LPC offset read after lockdown operationSubrata Banik
This patch is to provide an additional read LPC pci offset register BIOS_CONTROL (BC) - offset 0xDC to ensure that the last write is successful. Change-Id: I308c0622d348fc96c410a04ab4081bb6af98e874 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-02soc/intel/skylake: Clean up code by using common FAST_SPI moduleBarnali Sarkar
This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: I4fc90504d322db70ed4ea644b1593cc0605b5fe8 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19055 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-02soc/intel/skylake: Set xtal bypass on low power idleNaresh G Solanki
When using Wake On Voice &/or DCI, it requires xtal to be active during low power idle. With xtal being active in S0ix state power impact is 1-2 mW. Hence set xtal bypass bit in CIR31C for low power idle entry. TEST= Build with s0ix enable for Poppy. Boot to OS & verify that bit 22 of CIR31C register is set. s0ix works. Change-Id: Ide2d01536f652cd1b0ac32eede89ec410c5101cf Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19442 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-10soc/intel/skylake: Use common PCR moduleSubrata Banik
This patch use common PCR library to perform CRRd and CRWr operation using Port Ids, define inside soc/pcr_ids.h Change-Id: Id9336883514298e7f93fbc95aef8228202aa6fb9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18674 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-18skylake: Do FspTempRamInit only for FSP1.1 & tidy up PCH early initRizwan Qureshi
Prepare Skylake for FSP2.0 support. We do not use FSP-T in FSP2.0 driver, hence guard the FspTempRamInit call under a switch. In addition to the current early PCH configuration program few more register, so all in all we do the following, * Program and enable ACPI Base. * Program and enable PWRM Base. * Program TCO Base. * Program Interrupt configuration registers. * Program LPC IO decode range. * Program SMBUS Base address and enable it. * Enable upper 128 bytes of CMOS. And split the above programming into into smaller functions. Also, as part of bootblock_pch_early_init we enable decoding for HPET range. This is needed for FspMemoryInit to store and retrieve a global data pointer. And also move P2SB related definitions to a new header file. TEST=Build and boot Kunimitsu Change-Id: Ia201e03b745836ebb43b8d7cfc77550105c71d16 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16113 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-14soc/intel/skylake: Change name pmc_tco_regs to smbus_tco_regsBarnali Sarkar
The function name "pmc_tco_regs" is changed to "smbus_tco_regs" since TCO offsets belongs to SMBUS PCI device. BUG=none BRANCH=none TEST=Built and booted kunimitsu Change-Id: I4ac26df81a8221329f2b45053dd5243cd02f8ad7 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16155 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-08-08soc/intel/skylake: Cleanup patch for Skylake SoCBarnali Sarkar
Here is the list of items of code cleanup 1. Define TCO registers in smbus.h and not in pmc.h (as per EDS). 2. Include smbus.h wherever these TCO register defines were used. 3. Remove duplication of define in gpio_defs.h. 4. Remove unnecessary console.h include from memmap.h as no prints done. 5. Remove unnecessary comment from pch.c. BUG=none BRANCH=none TEST=Built and boot kunimitsu. Change-Id: Ibe6d2537ddde3c1c7f8ea5ada1bfaa9be79c0e3b Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16027 Tested-by: build bot (Jenkins) Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2016-02-15skylake: Finalize SMM in corebootDuncan Laurie
Once we lock down the SPI BAR we need to tell SMM to re-init its SPI driver or it will be unable to write ELOG events via SMI. This SMI is also sent at the end of depthcharge so there was just a window where SMI events could get lost. BUG=chrome-os-partner:50076 BRANCH=glados TEST=enable DEBUG_SMI, boot to dev screen, press power button and see elog events get added without without transaction errors. Change-Id: I1f14717b5e7f29c158dde8fd308bdbfb67eba41a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 60ca24c760c70e2ebe5f3e68f95d3ffdba0fef9e Original-Change-Id: I4e323249f00954e290a6a30f515e34632681bfdd Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/326861 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13697 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdownArchana Patni
Keeping ACPI PM timer alive prevents XTAL OSC shutdown in S0ix which has a power impact. Based on a DT variable, this patch disables the ACPI PM timer late in the boot sequence - disabling earlier will lead to a hang since the FSP boot flow needs this timer. This also hides the ACPI PM timer from the OS by removing from FADT table. Once the ACPI PM timer is disabled, TCO gets switched off as well. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Icfdc51bc33b5190a55196d67e18afdaaa2f9b310 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 18bcb8a434b029295e1f1cc925e2b47e79254583 Original-Change-Id: Ifebe8bb5a7978339e07e4e12e174b9b978135467 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319361 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13588 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: Display ME firmware status before os bootDhaval Sharma
Display ME firmware status before os boot. Specifically this patch reads out the ME hfsts1 and hfsts2 status registers that provide information about overall ME health before device gets disabled. This change reused most of the code from bdw me_status implementation. BUG=chrome-os-partner:47384 BRANCH=glados TEST=Builds and Boots on FAB4 SKU2/3. Can observe me status table Change-Id: Ia511c4f336d33a6f3b49a344bfbaea6ed227ffeb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a9d0fb411c3921654f0fdcea2a3d4ee601987af2 Original-Change-Id: Ied7e2dcd9a1298a38dfe1eda9296b9ca8eccf6b1 Original-Credits-to: Duncan Laurie <dlaurie@chromium.org> Original-Signed-off-by: Dhaval Sharma <dhaval.v.sharma@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/323260 Original-Commit-Ready: dhaval v sharma <dhaval.v.sharma@intel.com> Original-Tested-by: dhaval v sharma <dhaval.v.sharma@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13573 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-01-17intel/skylake: disable heci1 if psf is unlockedArchana Patni
This patch adds support for disabling the heci1 device at the end of boot sequence. Prior to this, FSP would have sent the end of post message to ME and initiated the d0i3 bit. This uses the Psf unlock policy and the p2sb device to disable the heci1 device, then lock the configuration and hide the device. BRANCH=none BUG=chrome-os-partner:45618 TEST=build for kunimitsu or glados board. set the hecienabled policy to 0 and check for heci 1 device status in kernel lspci. CQ-DEPEND=CL:*238451 Change-Id: I26b145231f8ed0c140af42d378b222e857d9aff6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fe184b8baf1bea9bcd0af1841785a4d763af9358 Original-Change-Id: I3b435491aeea0f2ca36b7877e942dc940560e4dd Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/311912 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12976 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-15intel/skylake: More UPD params are added for PCH policy in FSPRizwan Qureshi
Some more PCH Policy UPD Parameters are added in FSP. Lockdown config moved from FSP to coreboot. Removing settings in devicetree.cb which are zero. BRANCH=none BUG=none TEST=Build and booted on kunimitsu, verified that CB is doing the Lockdowns which were previously done by FSP. CQ-DEPEND=CL:*237842, CL:310191 Change-Id: I3dcf3a5340f3c5ef2fece2de5390cde48db4d327 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e8bdb35897b640d271adcaed266030367f060553 Original-Change-Id: Ia201672565c07b2e03d972b2718512cd4fcbb95c Original-Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/310869 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/12941 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-07-16soc/intel: Add Skylake SOC supportLee Leahy
Add the files to support the Skylake SOC. Matches chromium tree at 927026db BRANCH=none BUG=None TEST=Build and run on a Skylake platform Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10341 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-07-16soc/intel/skylake: Use Broadwell as comparision base for Skylake SOCLee Leahy
Use the Broadwell implementation as the comparison base for Skylake. BRANCH=none BUG=None TEST=None Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: http://review.coreboot.org/10340 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 14:03:11 +0000