summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake/bootblock
AgeCommit message (Collapse)Author
2021-01-31soc/intel/*: drop incomplete and unneeded check for DMI SRLOCKMichael Niewöhner
Before enabling IO decode ranges, current code checks if the DMI SRLOCK is set to prevent inconsistencies between LPC PCI cfg registers and LPC DMI registers, when the latter are locked. DMI SRLOCK only applies to PCHs with on-package DMI, but not to PCH-H, PCH-S and others with discrete PCH packages. So this check is at least incomplete. Further, the lock gets applied by FSP and gets reset on a warm reset. Thus, there is no case where the lock would be already set at the places where the DMI registers get written currently. Drop the checks for the reasons mentioned above. Change-Id: I59554ce96bce7f7d1a4ba9b098be9e8466c68eac Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49885 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-25soc/intel/{skl,cnl,xsp,icl,tgl,ehl,adl,jsl}: use common LPC mirroringMichael Niewöhner
Drop the old, redundant code for mirroring LPC registers to DMI and make use of the new common code. Select the new Kconfig option for LPC DMI mirroring by the option SOC_INTEL_COMMON_PCH_BASE, which is selected by platforms starting with SPT, except APL and Xeon-SP. For Xeon-SP, select DMI and the new Kconfig directly. APL, even though it's younger than SPT, does not need mirroring. Test: Set LGMR address by calling `lpc_open_mmio_window` and check that both the PCI cfg and DMI LGMR register get written correctly. Tested successfully on clevo/cml-u. Change-Id: Ibd834f1474d986646bcebb754a17db97831a651f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-09soc/intel/common/dmi: Move DMI defines into DMI driver headerSrinidhi N Kaushik
Move definitions of DMI control register and Secure Register Lock (SRL) bit into common/block/dmi driver header file. BUG=b:171534504 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Iefee818f58f399d4a127662a300b6e132494bad0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48257 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-29soc/intel: Configure P2SB before other PCH controllersFurquan Shaikh
This change updates bootblock_pch_early_init() to perform P2SB configuration before any other PCH controllers are initialized. This is done because the other controllers might perform PCR settings which requires the PCR base address to be configured. As the PCR base address configuration happens during P2SB initialization, this change moves the p2sb init calls before any other PCH controller initialization. BUG=b:171534504 Change-Id: I485556be003ff5338b4e2046768fe4f6d8a619a3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47885 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-05{nb,soc}/intel: Use get_current_microcode_rev() for ucode versionSubrata Banik
This patch removes all redundant read microcode version implementation from SoC directory and refer from cpu/intel/microcode/microcode.c file. TEST=Able to get correct microcode version. Change-Id: Icb905b18d85f1c5b68fac6905f3c65e95bffa2da Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44175 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02soc/intel/*/bootblock/cpu.c: Drop unused includesElyes HAOUAS
Change-Id: Ide01a922d7d8e500f9a0b507544010706661d7de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40690 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02{icelake,jasperlake,skylake,tigerlake}/bootblock.c: Clean up includesElyes HAOUAS
Drop unused includes and add missing <intelblocks/systemagent.h>. Change-Id: I06c8b2bf65283c3c1fcd25fdaae298b82fc0e09c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-06soc/intel/skylake: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I7354edb15ca9cbe181739bc2a148f16bb85ab118 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-03-18soc: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-18soc/intel/skylake: Control fixed IO decode from devicetreeWim Vervoorn
The current implementation doesn't allow custom values for the LPC IO decodes and IO enables. Add the lpc_ioe and lpc_iod values. If they are not zero, they will be used instead of the current handling for COMA and COMB. BUG=N/A TEST=tested on facebook monolith Change-Id: Iad7bb0e44739e8d656a542c79af7f98a4e9bde69 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38748 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17soc/intel/{cnl,icl,skl,tgl}/bootblock: Update text for DMI PCR 2774Wim Vervoorn
Make sure the Skylake comment refers to the correct BWG paragraph and update the text for all. BUG=N/A TEST=build Change-Id: Id383f200e079bdb91cea2240bd7a957d723a7b89 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-02-17soc/intel{cnl,icl,skl,tgl}/bootblock: Make sure DMI PCR 2770 is setWim Vervoorn
DMI PCR 2770 (LPC IO DECODE RANGES) should be identical to LPC PCI offset 0x80. This is specified in PCH BWG par 2.5.1.5. Add the support to make sure this PCR is always set correctly. BUG=N/A TEST=tested on facebook monolith. Change-Id: I33ff2b96dea78b5ff1c7c9416cf74f67d79f265d Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38746 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-26src: Remove unused include <string.h>Elyes HAOUAS
Change-Id: Ic6b66dd8fa387e67bb0ce609fb7e2553eeb66b3c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-12-26soc/intel/skylake: Rename pch_init() codeUsha P
This patch renames pch_init function to bootblock_pch_init and romstage_pch_init according to the stage it is defined in. TEST=Able to build and boot soraka successfully. Change-Id: Idf7b04edc3fce147f7957561ce7d5a0cd05f53fe Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-11-27soc/intel/skylake: Clean up report_cpu_info() functionUsha P
This patch makes below clean-up for report_cpu_info() function. 1. Remove unused variables. 2. Make fill_processor_name function available in bootblock. 3. Reuse fill_processor_name. TEST= Succesfully able to boot soraka and verify the cpu_name "CPU: Intel(R) Pentium(R) CPU 4415Y @ 1.60GHz" Change-Id: Idf7b04edc3fce147f7856591ce7e5a0cd05f43fe Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36840 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-22soc/intel/skylake: Refactor pch_early_init() codeUsha P
This patch keeps required pch_early_init() function like ABASE programming, GPE and RTC init into bootblock and moves remaining functions like TCO configuration and SMBUS init into romstage/pch.c in order to maintain only required chipset programming for bootblock and verstage. TEST=Able to build and boot soraka. Change-Id: Idf7b04edc3fce147f7857591ce7d5a0cd03f43fe Signed-off-by: Usha P <usha.p@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-10-26soc/intel/skylake: drop support for FSP 1.1Michael Niewöhner
This drops support for FSP 1.1 in soc/intel/skylake, after all boards have been migrated to FSP 2.0, which is backwards compatible. Any moving of files happens in a follow-up commit to make review easier. Change-Id: I0dd2eab0edfda0545ff94c3908b8574d5ad830bd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35813 Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-04src/pci_ids: add missing Intel Kaby Lake iGPU PCIIDsMaxim Polyakov
Adds missing Intel HD/Iris iGPU PCI IDs for Kaby Lake processors and updates the platform report for these devices. These changes are in accordance with the documentation: [*] page 10, Intel(R) Open Source HD Graphics and Intel Iris(TM) Plus Graphics for the 2016 - 2017 Intel Core(TM) Processors, Celeron(TM) Processors, and Pentium(TM) Processors based on the "Kaby Lake" Platform. Programmer's Reference Manual. Volume 4: Configurations. January 2017, Revision 1.0 Doc Ref # IHD-OS-KBL-Vol 4-1.17 [*] Linux kernel sources: include/drm/i915_pciids.h Change-Id: I1cd1e4ab82f756141f8f13edf1c17f726166dffb Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04src/pci_ids: add missing Intel Skylake iGPU PCIIDsMaxim Polyakov
Adds missing Intel HD/Iris iGPU PCI IDs for Skylake processors These changes are in accordance with the documentation: [*] page 11-12, Intel(R) Open Source HD Graphics, Intel Iris(TM) Graphics, and Intel Iris(TM) Pro Graphics, Programmer's Reference Manual. Volume 4: Configurations. May 2016, Revision 1.0 Doc Ref # IHD-OS-SKL-Vol 4-05.16 Change-Id: I0ba6e58ec3916dceea00519ac5a51503573e8935 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35493 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30pci_ids: rename PCI_DEVICE_ID_INTEL_SKL_ID_HMaxim Polyakov
The new macro name contains the number of cores: PCI_DEVICE_ID_INTEL_SKL_ID_H_4 - 4 core PCI_DEVICE_ID_INTEL_SKL_ID_H_2 - 2 core Change-Id: I190181b213d55865aa577ae5baff179fef95afde Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35302 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-06soc/intel/skylake: Add Lewisburg family PCH supportMaxim Polyakov
This patch adds Lewisburg C62x Series PCH support by adding the Production and Super SKUs of the following PCI devices: - LPC or eSPI Controllers, - PCI Express Root Ports, - SSATA and SATA Controllers, - SMBus, - SPI Controller, - ME/HECI, - Audio, - P2SB, - Power Management Controller. These changes are in accordance with the documentation: [*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub (PCH) Datasheet, May 2019. Document Number: 336067-007US Change-Id: I7eaf2c1bb725ffed66f86c023c415ad17fe5793d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-08-30soc/intel/skylake: Remove duplicated PCI IdMaxim Polyakov
Removes PCI_DEVICE_ID_INTEL_SKL_ID_DT because this PCI Id duplicates PCI_DEVICE_ID_INTEL_SKL_ID_S_4 (0x191f) Change-Id: I028a22d6a42c040f5991a03def3e410f515c1c7f Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-26lib/bootblock: Add simplified entry with basetimeKyösti Mälkki
This allows for minor optimization as num_timestamps becomes a constant zero for a function with local scope. The loop with calls to timestamp_add() gets removed from bootblock. Change-Id: Id230075c0e76fe377b6ea8c8ddf8318e07d29b91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-31soc/intel/skl: Add C232 chipset and reorder IDsFelix Singer
This patch ... - adds the PCH ID for C232 chipset, - renames "Premium" chipset to "HM170" (because of same IDs), - reorders the Skylake-H PCH IDs ascending by hex values. Used documents: - Intel 332690-005EN Change-Id: I859975fe7bcd3c10dead8fe150a2fbead9c64a51 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-08src/soc/intel/skylake/bootblock: Add SPT C236 to PCH TableChristian Walter
Add Skylake C236 to the PCH Table. The one which was already in there is actually the CM236 and not the C236. This can be checked in datasheet: 100-series-chipset-datasheet-vol-1 p. 25. Change-Id: I435927f15e9d3219886375426b09c68632dfe3d9 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-07soc/intel: Add some missing MCH PCIe IDsKeno Fischer
These are documented in the Intel Datasheet entitled "6th Generation Intel® Processor Datasheet for S-Platforms" "6th Generation Intel® Processor Datasheet for H-Platforms" (Volume 2) Without them, coreboot fails to properly inform the payload of the amount of available memory. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Change-Id: I5b810c6415c4aa0404e5fa318d2c8db292566b8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/33286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-05-23soc/intel/skylake: Add PCI Id for Kabylake DTChristian Walter
Change-Id: I496b3a91f765d4fa137c32c9ee1e244803fc25d8 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32850 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/skylake: Add missing PCH IDsMarius Genheimer
Added IDs for: - H170 - Z170 - Q170 - Q150 - B150 Used documents: - 332690-005EN Tested on Gigabyte GA-Z170N-WIFI Change-Id: If20a2b764afa02785a97948893dbc5b5f60aff60 Signed-off-by: Marius Genheimer <mail@f0wl.cc> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32517 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-26soc/{amd,intel}/chip: Use local include for chip.hElyes HAOUAS
Change-Id: Ic1fcbf4b54b7d0b5cda04ca9f7fc145050c867b8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-06soc/intel/skylake: Add H110 PCH seriesMaxim Polyakov
This patch adds support H110 chipset (Sunrise Point) for Skylake and Kaby Lake processor families by adding the corresponding IDs. It has been tested on ASRock H110M-DVS motherboard (Skylake i5-6600 CPU). Change-Id: I85ba65ac860687b0f9fd781938e5cac21a1b668d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31602 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-06soc/intel/skylake: Add new Northbridge and IGD IDsMaxim Polyakov
This patch adds support 1) Intel(R) Xeon(R) E3 - 1200/1500 v5/6th Gen Intel(R) Core(TM) Host Bridge/DRAM Registers - 191F; 2) HD Graphics 530 Skylake GT2 - Intel integrated graphics processor https://en.wikichip.org/wiki/intel/hd_graphics/530. This is required to run coreboot on the Intel Core i5-6600 (Skylake) desktop processor. It has been tested on ASRock H110M-DVS motherboard. Change-Id: If47e9ac32813a9f73d3a23f44536f60d1003971d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31601 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-01device/pci: Fix PCI accessor headersKyösti Mälkki
PCI config accessors are no longer indirectly included from <arch/io.h> use <device/pci_ops.h> instead. Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-10soc/intel/common/block: Move tco common functions into block/smbusSubrata Banik
This patch cleans soc/intel/{apl/cnl/icl/skl} by moving common soc code into common/block/smbus. BUG=b:78109109 BRANCH=NONE TEST=Build and boot KBL/CNL/APL/ICL platform. Change-Id: I34b33922cafee9f31702587e0f9c03b64f0781b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/26166 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-09soc/intel: Clean mess around UART_DEBUGNico Huber
Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-12-24Remove intel/skylake/bootblock/timestamp.incKyösti Mälkki
Platform has been moved to C_ENVIRONMENT_BOOTBLOCK and this file was for romcc bootblock. Change-Id: I2c249b18edd41c9a7798400d24b1c9228422d59b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-13cpuid: Add helper function for cpuid(1) functionsSubrata Banik
This patch introduces 3 helper function for cpuid(1) : 1. cpu_get_cpuid() -> to get processor id (from cpuid.eax) 2. cpu_get_feature_flags_ecx -> to get processor feature flag (from cpuid.ecx) 3. cpu_get_feature_flags_edx -> to get processor feature flag (from cpuid.edx) Above 3 helper functions are targeted to replace majority of cpuid(1) references. Change-Id: Ib96a7c79dadb1feff0b8d58aa408b355fbb3bc50 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/30123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-08soc/intel/skylake: Add PCH sku id's supported for KBLPraveen hodagatta pranesh
This patch also add new SKL PCH-H device id's in soc platform reporting and common lpc driver. BUG=None TEST=Booted kabylake RVP11 with HM175 SKL PCH-H and verified the device id in serial logs. Change-Id: I8c04bf8d9c27caad800427a5c29da869da1d445d Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-11src: Replace MSR addresses with macrosElyes HAOUAS
Change-Id: I849dd406f5ccc733d4957eaf1c774745782f531a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-08-20soc/intel/common/block: Move common uart function to block/uartSubrata Banik
This patch moves uart functions which are common across multiple soc to block/uart. This will remove redundant code copy from soc {skylake/apollolake/cannonlake}. BUG=b:78109109 BRANCH=none TEST=Build and boot on KBL/APL/CNL platform. Change-Id: I109d0e5c942e499cb763bde47cb7d53dfbf5cef6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-10src: Fix typoElyes HAOUAS
Change-Id: I689c5663ef59861f79b68220abd146144f7618de Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-06src/soc/intel: Add AML IGD in platform reportingGaggery Tsai
This patch revises IGD naming and adds AML IGD in platform reporting. BUG=None BRANCH=None TEST=emerge-atlas coreboot chromeos-bootimage & Ensure AML IGD is shown in platform reporting. Change-Id: Id8f8379703abdaa5b14a4337a4fca04b370f3a2a Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/27846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-07-09src/soc: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I21680354f33916b7b4d913f51a842b5d6c2ecef3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28soc/intel/common/block: Move p2sb common functions into block/p2sbSubrata Banik
This patch cleans soc/intel/{apollolake/cannonlake/skylake} by moving common soc code into common/block/p2sb. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL/CNL/APL platform. Change-Id: Ie9fd933d155b3fcd0d616b41cdf042cefe2c649a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-14src: Get rid of device_tElyes HAOUAS
Use of device_t is deprecated. Change-Id: I6adc0429ae9ecc8f726d6167a6458d9333dc515f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22bootblock: Allow more timestamps in bootblock_main_with_timestamp()Julius Werner
This patch adds more parameters to bootblock_main_with_timestamp() to give callers the opportunity to add additional timestamps that were recorded in the platform-specific initialization phase. Change-Id: Idf3a0fcf5aee88a33747afc69e055b95bd38750c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-03-26soc/intel: Add KBL-S MCH and some KBL PCH supportGaggery Tsai
This patch adds the support for KBL-S MCH and Z270, H270, B250 and Q250 PCH chips. BUG=None BRANCH=None TEST=Boot with KBL-S CPU and B250/H270 PCHs. Change-Id: If03abb215f225d648505e05274e2f08ff02cebdc Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/25305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-03-09soc/intel/skylake: Move PCR DMI programming into bootblockSubrata Banik
As per PCH BWG 2.5.16, set up LPC IO Enables PCR[DMI] + 2774h bit [15:0] to the same value program in LPC PCI offset 82h. Also this cycle decoding is only allowed to set when SRLOCK is not set. Hence move the required programming from lpc.c to pch.c. Also only enable COM port ranges if CONFIG_DRIVERS_UART_8250IO Kconfig is selected. Change-Id: Ie706735492a450baa653d8a8bb74c6e42f5150b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-07soc/intel/skylake: Add Kabylake PCH H device ID'sV Sowmya
Add PCH,MCH,IGD,I2C,PMC,SMBUS,XCHI and UART IDs for PCH H. Change-Id: I52b38457bc727735ceb5003cbccda6d7ba3340a2 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/23382 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-25soc/intel/skylake: Clean up the skylake PCH H device ID macrosV Sowmya
Rename the device ID macros as per the skylake PCH H external design specification. Change-Id: I4e80d41380dc1973d02bc69ac32aad5c4741a976 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/23381 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22ic2/designware: Move Intel i2c logic to shared driverChris Ching
BUG=b:70232394 BRANCH=none TEST=emerge-reef coreboot emerge-glados Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-08soc/intel/skylake: Clean up bootblock/report_platform.cSubrata Banik
This patch ensures that all required information for pch/mch/igd deviceid and revision available in single stage and make use of local references. TEST=Build and boot soraka/eve Change-Id: I6f7f219536831210750a486ee3b3308d6f285451 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22756 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-07soc/intel/skylake: Clean up UART codeAamir Bohra
Clean up and move UART related code under a single uart.c file. Change-Id: I7ed03fc5fe79e38350d7edc70ad55d54db780fed Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/22753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-11-15soc/intel/skylake: Make use of common CSE code for skylakeSubrata Banik
TEST=Ensures global reset could able to reset system. Change-Id: I11ce1812a5a0aa2da6b414555374460d606e220e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-05soc/intel/skylake: Add support in SKL for PMC common codeShaunak Saha
Change-Id: I3742f9c22d990edd918713155ae0bb1853663b6f Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/20499 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-03soc/intel/skylake: Enable common LPC IPRavi Sarawadi
Enable Skylake to use the new common LPC code. This will help to reduce code duplication and streamline code bring up. Change-Id: I042e459fb7c07f024a7f6a5fe7da13eb5f0dd688 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-22soc/intel/skylake: add Kabylake Celeron base SKUGaggery Tsai
This patch adds the support for Kabylake Celeron base SKU with PCH ID 0x9d50. BRANCH=none BUG=b:65709679 TEST=Ensure coreboot could recognize the Kabylake Celeron base SKU and boot into OS. Change-Id: I9c6f7bf643e0dbeb132fb677fcff461244101a55 Signed-off-by: Tsai, Gaggery <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Wu <david_wu@quantatw.com> Reviewed-by: T.H. Lin <T.H_Lin@quantatw.com>
2017-08-16soc/intel/skylake: Add proper support to enable UART2 in 16550 modeSubrata Banik
Need to perform a dummy read in order to activate LPSS UART's 16550 8-bit compatibility mode. TEST=Able to get serial log in both 32 bit and 8 bit mode through LPSS UART2 based on CONFIG_DRIVERS_UART_8250MEM_32 and CONFIG_DRIVERS_UART_8250MEM selection. Change-Id: I5f23fef4522743efd49167afb04d56032e16e417 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-10soc/intel/common/uart: Refactor uart_common_initFurquan Shaikh
1. Create a new function uart_lpss_init which takes the UART LPSS controller out of reset and initializes and enables clock. 2. Instead of passing in m/n clock divider values as parameters to uart_common_init, introduce Kconfig variables so that uart_lpss_init can use the values directly without having to query the SoC. BUG=b:64030366 TEST=Verified that UART still works on APL and KBL boards. Change-Id: I74d01b0037d8c38fe6480c38ff2283d76097282a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-11soc/intel/skylake: Fix PMC address range setup for PCH-HNico Huber
The PMC of PCH-H requires a different destination id. TEST=Run on kontron/bsl6 and observed that PM registers are correctly dumped at start of romstage. Change-Id: I862e4df986f1cdea34f8fa45d016fb6b51f29122 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-11soc/intel/skylake: Set generic I/O decode ranges earlyNico Huber
Move the generic I/O decode range setup before the console init. TEST=Run on kontron/bsl6 which requires 0xa80/0xa81 decoded to initialize serial ports. Serial console works from boot- block on. Change-Id: I9829f188c80eb73f6cd91b0c22e1c07da5745ad6 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-01soc/intel/skylake: Remove unnecessary P-State and Flex Ratio assignmentBarnali Sarkar
This patch basically does two things - 1) Remove unnecessary setting of flex_ratio to TDP nominal: Factory configured (default) Max Non-TURBO ratio(P1) is already cofigured in MSR_PLATFORM_INFO(0xCE). If this Maximum Non-TURBO Ratio(P1) needs to be modified, it should be done using MSR_FLEX_RATIO (0x194). Here, in this code, the FLEX_RATIO is being modified by the TDP Nominal Ratio, reading the MSR_CONFIG_TDP_NOMINAL(0x648). But this value is actually less than the factory configured Maximum Non TURBO Ratio (P1). So, this code is actually not required. Also, the Bit 12 in PCH Soft Strap Register is already set in descriptor. This Bit implies Processor Boot Max Frequency - 0 = Disable Boot Max Frequency 1 = Enable Boot Max Frequency (Default) This setting determines if the processor will operate at maximum frequency at power-on and boot. Thus this patch will avoid one extra platform warm reset now onwards. 2) Remove wrongly setting Max Frequency in Bootblock phase: In the function set_max_frequency(), the P-State max ratio was set to TDP Nominal ratio if C-TDP was enabled, else it was set to Max Non Trbo ratio. But, when the cpu gets reset, it will operate with the Max-Non Turbo ratio only, which is greater than the TDP Nominal ratio. So, no need to set back the ratio to TDP Nominal which is lower than the currently operating frequency. BUG=none BRANCH=none TEST=Build and boot poppy Change-Id: I24bfc86ddf0f038d85da938e41e950382fe2a6c3 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-23soc/intel/skylake: Use CPU MP Init Common codeBarnali Sarkar
This patch uses the common CPU Mp Init code. BUG=none BRANCH=none TEST=Build and boot poppy Change-Id: Ieb2f8ae25a31e86e9251fe97859678745fe610f5 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-09soc/intel/skylake: Use CPU common library codeBarnali Sarkar
This patch makes SOC files to use common/block/cpu/cpulib.c file's helper functions. Change-Id: I6af56564c6f488f58173ba0beda6912763706f9f Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19566 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-09soc/intel/skylake: Move update microcode from cbfs to mp_ops callbacksBarnali Sarkar
FIT is already loading microcode before CPU Reset. So, we need not update the microcode again in RO FW in bootblock. But we need to update in RW FW if there is any new ucode version. So, added the update microcode function in get_microcode_info callback before MP Init to make sure BSP is using the microcode from cbfs. BUG=none BRANCH=none TEST=Build and Boot poppy Change-Id: I5606563726c00974f00285acfa435cadc90a085e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/20051 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-06-06soc/intel/skylake: Use PCI IDs from device/pci_ids.hSubrata Banik
Remove PCI IDs inclusion from soc header rather referring those from device/pci_ids.h. Change-Id: I490da3e336fb6f8194d5fba800132f550ed5ab37 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-05soc/intel/skylake: Add config for cpu base clock frequencyAamir Bohra
Add config for cpu base clock frequency(Mhz) and replace current refrence from soc/cpu.h with config option. Change-Id: Idf8e85f7ae6d965fa987a4f5c4905503ee354d69 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/20016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-05soc/intel/common/block: add bios caching to fast spi moduleAaron Durbin
Add fast_spi_cache_bios_region() that sets up a variable MTRR as write-protect covering the fast spi BIOS region. Change-Id: I282c5173cc655004daf16ea2e85423aaded3648d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-18intel/common/block/i2c: Add common block for I2C and use the same in SoCsRizwan Qureshi
In the intel/common/block * Move I2C common code from intel/common to intel/common/block. * Split the code into common, early init and post mem init stages and put it in lpss_i2c.c, i2c_early.c and i2c.c respectively. * Declare functions for getting platform specific i2c bus config and mapping bus to devfn and vice versa, that have to be implemented by SoC. In skylake/apollolake * Stop using code from soc/intel/common/lpss_i2c.c. * Remove early i2c initialization code from bootblock. * Refactor i2c.c file to implement SoC specific methods required by the I2C IP block. Change-Id: I4d91a04c22e181e3a995112cce6d5f0324130b81 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/19468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-09soc/intel/skylake: Use intel/common/block/smbus codeAamir Bohra
Change-Id: I2ca32ab594552424e4f1358302641f159a3d7e62 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-02soc/intel/skylake: Clean up code by using common FAST_SPI moduleBarnali Sarkar
This patch currently contains the following - 1. Use SOC_INTEL_COMMON_BLOCK_FAST_SPI kconfig for common FAST_SPI code. 2. Perform FAST_SPI programming by calling APIs from common FAST_SPI library. 3. Use common FAST_SPI header file. Change-Id: I4fc90504d322db70ed4ea644b1593cc0605b5fe8 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/19055 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-28soc/intel/skylake: Use ITSS common codeBora Guvendik
This patch uses common ITSS library to setup itss irq. Change-Id: Ibe65a92f1604277bec229c67f4375b6636c0972d Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19244 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-25soc/intel: Unify `timestamp.inc`Paul Menzel
These files are actually indentical, but unfortunately, the formatting was changed without caring for the already present files. Fix that. Use the license formatting where less lines are used. The next step is to put that in a common location. Change-Id: Iecb263b9d321a33e64988b315220893df2e0045c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/19423 Tested-by: build bot (Jenkins) Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2017-04-25lib: provide clearer devicetree semanticsAaron Durbin
The devicetree data structures have been available in more than just ramstage and romstage. In order to provide clearer and consistent semantics two new macros are provided: 1. DEVTREE_EARLY which is true when !ENV_RAMSTAGE 2. DEVTREE_CONST as a replacment for ROMSTAGE_CONST The ROMSTAGE_CONST attribute is used in the source code to mark the devicetree data structures as const in early stages even though it's not just romstage. Therefore, rename the attribute to DEVTREE_CONST as that's the actual usage. The only place where the usage was not devicetree related is console_loglevel, but the same name was used for consistency. Any stage that is not ramstage has the const C attribute applied when DEVTREE_CONST is used. Change-Id: Ibd51c2628dc8f68e0896974f7e4e7c8588d333ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19333 Tested-by: build bot (Jenkins) Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-04-24soc/intel/skylake: Add ID's for Kabylake-RNaresh G Solanki
Add CPUID, IGD, MCH & LPC ID of Kabylake-R. Change-Id: I5ee7b3a2616f71137bba83c071288dbda2acde3d Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19218 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Balaji Manigandan <balaji.manigandan@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-04-11soc/intel/skylake: Use intel/common/uart driverAamir Bohra
Change-Id: Id132df15ae5a6aef75d6434df18fc71d8d28c3ca Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19003 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-11soc/intel/skylake: Use LPSS common libraryAamir Bohra
Use lpss common library to program reset and clock register for lpss modules. Change-Id: I198feba7c6f6d033ab77ed25a5bd9ea99411a1e4 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19153 Tested-by: build bot (Jenkins) Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-10soc/intel/skylake: Use RTC common codeSubrata Banik
This patch uses common RTC library to enable upper 128 byte bank of RTC RAM. Change-Id: Ibcbaf5061e96a67815116a9f7a03be515997be6d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18701 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2017-04-10soc/intel/skylake: Use common PCR moduleSubrata Banik
This patch use common PCR library to perform CRRd and CRWr operation using Port Ids, define inside soc/pcr_ids.h Change-Id: Id9336883514298e7f93fbc95aef8228202aa6fb9 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18674 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-04-06soc/intel/skylake: Add support for GSPI controllerFurquan Shaikh
Sky Lake PCH contains two GSPI controllers. Using the common GSPI controller driver implementation for Intel PCH, add support for GSPI controller buses on Sky Lake/Kaby Lake. BUG=b:35583330 Change-Id: I29b1d4d5a6ee4093f2596065ac375c06f17d33ac Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19099 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-28soc/intel/skylake: Clean up code by using common System Agent moduleSubrata Banik
This patch currently contains the SA initialization required for bootblock phase - 1. Use SOC_INTEL_COMMON_BLOCK_SA kconfig for common SA code. 2. Perform PCIEXBAR programming based on soc configurable PCIEX_LENGTH_xxxMB 3. Use common systemagent header file. Change-Id: I0fa0a60f680b9b00b7f26f1875c553612b123a8e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18566 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/pci_devs.h: Use consistent naming in soc/pci_devs.hSubrata Banik
This patch to make common PCI device name between APL and SKL. Change-Id: I5e4c7502e9678c0a367e9c7a96cf848d5b24f68e Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18576 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-28soc/intel/common/block: Add cache as ram init and teardown codeSubrata Banik
Create sample model for common car init and teardown programming. TEST=Booted Reef, KCRD/EVE, GLKRVP with CAR_CQOS, CAR_NEM_ENHANCED and CAR_NEM configs till post code 0x2a. Change-Id: Iffd0c3e3ca81a3d283d5f1da115222a222e6b157 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18381 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2017-03-24soc/intel/skylake: Use C entry code for MTRR programmingSubrata Banik
Make skylake cache as ram SPI mapped MTRR programming align with apollolake code. Change-Id: I87a5c655da8ff5f6d8ef86907b7ae2263239b1ac Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18923 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-03-17soc/intel/skylake: Fix remaining issues detected by checkpatchLee Leahy
Fix the following errors and warnings detected by checkpatch.pl: ERROR: code indent should use tabs where possible ERROR: Macros with complex values should be enclosed in parentheses ERROR: "foo * bar" should be "foo *bar" ERROR: space required before the open parenthesis '(' ERROR: spaces required around that '=' (ctx:VxW) WARNING: space prohibited between function name and open parenthesis '(' WARNING: storage class should be at the beginning of the declaration WARNING: char * array declaration might be better as static const WARNING: please, no space before tabs WARNING: braces {} are not necessary for single statement blocks WARNING: else is not generally useful after a break or return WARNING: static const char * array should probably be static const char * const TEST=Build for glados Change-Id: Ic14ca3abd193cfe257504a55ab6b74782b26bf6d Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18868 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-17soc/intel/skylake: Wrap lines at 80 columnsLee Leahy
Fix the following warning detected by checkpatch: WARNING: line over 80 characters TEST=Build for glados Change-Id: I79341f46ca06ac052f987975ccaf975470d27806 Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18867 Tested-by: build bot (Jenkins) Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
2017-03-17soc/intel/skylake: Add int to unsignedLee Leahy
Fix the following warning detected by checkpatch.pl: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' TEST=Build for glados Change-Id: Idc2ad265e8ed8cd7fd6d228cfbe4cbbcb9d3ebfc Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/18866 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-03-06soc/intel/skylake: Clean up CPU codeSubrata Banik
Use header (soc/intel/common/block/include/intelblocks/msr.h) for MSR macros Change-Id: I401b92cda54b6140f2fe23a6447dad89879a5ef0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/18554 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-16soc/intel/skylake: Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL ↵Sooi, Li Cheng
HALO SOC Add CPU, PCH, MCH, IGD, XHCI and UART IDs for SKL/KBL HALO SOC Change-Id: I6a44d55d1588d2620bd1179ea7dc327922f49fd7 Signed-off-by: Sooi, Li Cheng <li.cheng.sooi@intel.com> Reviewed-on: https://review.coreboot.org/18028 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30soc/skylake: Move IO decode range out from pch_lpc_initTeo Boon Tiong
1. Move existing IO decode range from pch_lpc_init to early stage before SIO init. 2. At the same time, enable SIO decode range (0x2e/0x2f) for platform which use super IO. Change-Id: I72df16d0a784686d8cadfbee09b5aef60576ac43 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17337 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-28soc/intel/skylake: Initialize UART based on CONFIG_UART_DEBUGTeo Boon Tiong
Current implementation checks for CONFIG_BOOTBLOCK_CONSOLE and then initializes UART. If only CONFIG_BOOTBLOCK_CONSOLE is enabled without enabling CONFIG_UART_DEBUG, there are compilation issues. This is the case when using SIO UART for Skylake DT platform. Hence initialize UART when CONFIG_UART_DEBUG is enabled and not based on CONFIG_BOOTBLOCK_CONSOLE. Also move BOOTBLOCK_CONSOLE out from UART_DEBUG to CPU_SPECIFIC_OPTIONS as part of the fix needed. Change-Id: Id422a55a68d64a06fc874bddca46b0ef5be6d596 Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com> Reviewed-on: https://review.coreboot.org/17349 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-11soc/intel/common/lpss_i2c: simplify API and use common config structureAaron Durbin
The apollolake and skylake had duplicate stanzas of code for initializing the i2c buses. Additionally, they also had very similar structures for providing settings for the i2c speed control. Introduce a new struct lpss_i2c_bus_config and utilize it in both apollolake and skylake thereby removing the need for SoC-specific structres. The new structure is used for initializing a bus fully as the lpss i2c API is simplified in that lpss_i2c_init() is only required to be called. The struct lpss_i2c_bus_config structure is passed in for both initializing and filling in the SSDT information. The formerly exposed functions are made static to reduce the external API exposure. BUG=chrome-os-partner:58889 Change-Id: Ib4fa8a7a4de052da75c778a7658741a5a8e0e6b9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17348 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-11-07soc/intel/skylake: Add device id for PCH-YNaresh G Solanki
Add device id for PCH-Y used in Kaby Lake RVP3 board. Change-Id: I9235265cf88e4d044e7216f53e6da7021fb68238 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/17244 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-27skylake: Prepare GPE for use in bootblockDuncan Laurie
Export the pmc_gpe_init() function from pmc.c to pmutil.c so it can be used in bootblock, and then call it from there to initialize any GPEs for use in firmware. BUG=chrome-os-partner:58666 TEST=test working GPE as TPM interrupt on skylake board Change-Id: I6b4f7d0aa689db42dc455075f84ab5694e8c9661 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17135 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-16soc/intel/skylake: Enable HECI BAR for ME communicationSubrata Banik
This patch programs and enables BAR for ME (bus:0/ device:0x16/function:0) device to have early ME communication. BUG=none BRANCH=none TEST=Verified Global Reset MEI message can able to perform platform global reset during romstage. Change-Id: I99ce0ccd42610112a361a48ba31168c9feaa0332 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17016 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-08-30soc/intel/skylake: Include Kabylake specific IGD Device IDsBarnali Sarkar
Add Kabylake specific Graphics IDs in report_platform.c and igd.c. BUG=none BRANCH=none TEST=Built and boot kunimitsu Change-Id: I3b810d0ff51eb51d396b783e282779aefb2dcb8c Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/16329 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 08:01:34 +0000