summaryrefslogtreecommitdiff
path: root/src/soc/intel/skylake/Kconfig
AgeCommit message (Collapse)Author
2020-10-03soc/intel: Make use of PMC low power program from common blockSubrata Banik
List of changes: 1. Select PMC_LOW_POWER_MODE_PROGRAM from applicable SoC directory 2. Remove redundant PMC programming from SoC and refer to common code block 3. Remove unused 'reg8' and 'reg32' variable as applicable from SoC function. Change-Id: I18894c49cfc6e88675b5fb71bca0412e5639fb4b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45796 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-02drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES configShelley Chen
Added new config BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES to accomodate older x86 platforms that don't allow writing to SPI flash when early stages are running XIP from flash. If BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES is not selected, BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY will get auto-selected if BOOT_DEVICE_SPI_FLASH_RW_NOMMAP=y. This allows for current platforms that write to flash in the earlier stages, assuming that they have that capability. BUG=b:150502246 BRANCH=None TEST=diff the coreboot.rom files resulting from running ./util/abuild/abuild -p none -t GOOGLE_NAMI -x -a --timeless with and without this change to make sure that there was no difference. Also did this for GOOGLE_CANDY board, which is baytrail based (and has BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES enabled). Change-Id: I3aef8be702f55873233610b8e20d0662aa951ca7 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-09-26arch/x86: Introduce `ARCH_ALL_STAGES_X86_32`Angel Pons
Nearly every x86 platform uses the same arch for all stages. The only exception is Picasso. So, factor out redundant symbols from the rest. Alder Lake is not yet complete, so it has been skipped for now. Change-Id: I7cff9efbc44546807d9af089292c69fb0acc7bad Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-14soc/intel/common/cpu: Update COS mask calculation for NEM enhanced modeAamir Bohra
Update the COS mask calculation to accomodate the RW data as per SoC configuration. Currently only one way is allocated for RW data and configured for non-eviction. For earlier platform this served fine, and could accomodate a RW data up to 256Kb. Starting TGL and JSL, the DCACHE_RAM_SIZE is configured for 512Kb, which cannot be mapped to a single way. Hence update the number of ways to be configured for non- eviction as per total LLC size. The total LLC size/ number of ways gives the way size. DCACHE_RAM_SIZE/ way size gives the number of ways that need to be configured for non- eviction, instead of harcoding it to 1. TGL uses MSR IA32_CR_SF_QOS_MASK_1(0x1891) and IA32_CR_SF_QOS_MASK_2(0x1892) as COS mask selection register and hence needs to be progarmmed accordingly. Also JSL and TGL platforms the COS mask selection is mapped to bit 32:33 of MSR IA32_PQR_ASSOC(0xC8F) and need to be updated in edx(maps 63:32) before MSR write instead of eax(maps 31:0). This implementation corrects that as well. BUG=b:149273819 TEST= Boot waddledoo(JSL), hatch(CML), Volteer(TGL)with NEM enhanced CAR configuration. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I54e047161853bfc70516c1d607aa479e68836d04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-26cpu,soc/intel: Drop select SMPKyösti Mälkki
Implicitly selected with MAX_CPUS != 1. Change-Id: I4ac3e30e9f96cd52244b4bae73bafce0564d41e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-10ACPI: Remove Kconfig COMMON_FADTKyösti Mälkki
Also remove default mb/*/fadt.c from Makefiles. Change-Id: I6a2839c524f8311ec9a382a84066afc7d579eaca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41948 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-27soc/intel/gma: Move DDI-A 4-lane config to common codeNico Huber
Change-Id: I0572dbbfb61e5e0129fe6a3a1b5894145d74fd0d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40728 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Skylake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on nami system Change-Id: Idc82f3d2f805b92fb3005d2f49098e55cb142e45 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-17soc/intel: Disable config option for SCS by defaultDuncan Laurie
The eMMC/SD interface is not present in all Intel platforms so this change removes the default enable for the storage controller and instead enables it in the specific SoCs that do provide it. Currently this includes all platforms except Tigerlake. Change-Id: I8b6cab41dbd5080f4a7801f01279f47e80ceaefd Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-05fsp2_0: Gather Kconfig declarationsNico Huber
Move more Kconfig declarations to drivers/intel/fsp2_0/ and document them properly. This way, we don't have to repeat dependencies and have the prompts in a common place. We can also easily hide the prompt for the header path in case the FSP repository is used. SP platforms were skipped as their Kconfig is too weird but they shouldn't hold other platforms back. Change-Id: Iba5af49bcd15427e9eb9b111e6c4cc9bcb7adcae Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-03-30intel/fsp2_0: Make FSP_USE_REPO a SoC opt-inJohanna Schander
For quite a bit now we are extending the FSP_USE_REPO option to be available for all Intel SoCs. This results in a list being not only hard to maintain but also prone to errors. To change that behaviour this commit introduces the HAVE_INTEL_FSP_REPO config option for SoCs that are supported from within 3rdparty/fsp. If a SoC selects HAVE_INTEL_FSP_REPO the config option FSP_USE_REPO is selected by default, but can be still deselected by the user in menuconfig. Change-Id: I68ae373ce591f06073064aa75aac32ceca8fa1cc Signed-off-by: Johanna Schander <coreboot@mimoja.de> Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37582 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-04soc/intel/cpu: Select NO_FIXED_XIP_ROM_SIZEArthur Heymans
The cache as ram code will use one form of a non-eviction mode. Change-Id: I418eb48434aa3da3bf5ca65315bb8c9077523966 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-21security/intel/stm: Use depends on ENABLE_VMXEugene Myers
The STM is a part of the core VTx and using ENABLE_VMX will make the STM option available for any configuration that has an Intel processor that supports VTx. Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov> Change-Id: I57ff82754e6c692c8722d41f812e35940346888a Reviewed-on: https://review.coreboot.org/c/coreboot/+/38852 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-17vboot: remove VBOOT_SAVE_RECOVERY_REASON_ON_REBOOT optionJoel Kitching
With CL:1940398, this option is no longer needed. Recovery requests are not cleared until kernel verification stage is reached. If the FSP triggers any reboots, recovery requests will be preserved. In particular: - Manual requests will be preserved via recovery switch state, whose behaviour is modified in CB:38779. - Other recovery requests will remain in nvdata across reboot. These functions now only work after verstage has run: int vboot_check_recovery_request(void) int vboot_recovery_mode_enabled(void) int vboot_developer_mode_enabled(void) BUG=b:124141368, b:35576380 TEST=make clean && make test-abuild BRANCH=none Change-Id: I52d17a3c6730be5c04c3c0ae020368d11db6ca3c Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38780 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-02-09intel/stm: Add platform opt-in KconfigNico Huber
Selecting STM on an arbitrary platform would likely result in a brick, so let's hide the prompt by default. Change-Id: I50f2106ac05c3efb7f92fccb1e6edfbf961b68b8 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: <cedarhouse1@comcast.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-01-16soc/intel/{cnl,icl,skl, tgl}: Move SOC_INTEL_COMMON_BLOCK_THERMAL into SoC ↵Subrata Banik
specific Kconfig This patch moves common pch code SOC_INTEL_COMMON_BLOCK_THERMAL Kconfig selection into SoC specific Kconfig selection as PCH thermal device is not available with latest PCH (i.e. TGP and JSP). Also added TODO for TGL thermal configuration as applicable. TEST=Able to build and boot TGL RVP with this CL Change-Id: Ibce17cc9f38fb666011ccd8f97bee63033ff5302 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38444 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-15soc/intel/common/block/fast_spi: don't include all spi flash driversAaron Durbin
The fast spi driver implements hardware sequencing which abstracts away the underlying spi flash commands in the hardware block. It also has its own spi flash probe function to intercept the spi flash ops. As such it's not necessary to include all spi flash drivers. On a hatch Chrome OS build this saves 9.5KiB of text in each of verstage, romstage, and ramstage. Change-Id: Ifb1b962cde3a6a02353ddf83279234057a9ec2fa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38363 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-15drives/spi/spi_flash: add option to not select all driversAaron Durbin
Add a new Kconfig option, SPI_FLASH_DONT_INCLUDE_ALL_DRIVERS, to make it easier for other parts of the code base to indicate that all spi flash drivers should not be included. Change-Id: Ibf2c4f1d2b8a73cff14bb627ddf759d7970920ea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-19{drivers,soc}/intel/fsp2_0: Move chipset specific logo handling to SoCWim Vervoorn
FSP logo handling used FspsConfig.LogoPtr and FspsConfig.LogoSize which are chipset specific. Create soc_load_logo() which will pass the logo pointer and size. This function will call fsp_load_logo which will load the logo. BUG=NA TEST= Build and verified logo is displayed on Facebook Monolith Change-Id: I30c7bdc0532ff8823e06f4136f210b542385d5ce Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37792 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-17soc/intel/skylake: Change SA_PCIEX_LENGTH to 256MBWim Vervoorn
Skylake soc code sets the length of the PCIe configuration space to 64 MB while the specification allows up to 256 MB. Linux reports "acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bos 00-3f] only partially covers this bridge". Remove "select PCIEX_LENGTH_64MB" from Kconfig so the default 256MB will be used and the size can be reduced on the mainboard level when required. BUG=N/A TEST=tested on facebook monolith Tested is by booting Linux 4.15 and analyzing the coreboot and Linux dmesg to make sure the memory range is reported correctly and doesn't create an overlap. Change-Id: I8a06b9fba5ad561d8595292a73136091ab532faa Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37704 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-06soc/intel/skylake: Add option to control microcode update inclusionWim Vervoorn
On embedded boards the cpu mounted on the board is known. So it is not required to include microcode for all possible Sky Lake and Kaby Lake cpus. This patch provides the possibility to only support the versions required. By default all microcode updates will be included and the versions not required can be removed using Kconfig. BUG=N/A TEST=build Change-Id: Iaa36c2846b2279a2eb2b61e6c97d6c89d0736f55 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-28soc/intel/skl: Drop FSP_CAR remnantsNico Huber
FSP-T support was abandoned long ago for Skylake. With FSP1.1 support also dropped now, it's more visible that this code is unused. Change-Id: I83a9130ef403b498e2beea01749c178e547b0f08 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37251 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-25Kconfig: Drop the C_ENVIRONMENT_BOOTBLOCK symbolArthur Heymans
The romcc bootblock will be deprecated soon and most platforms use C_ENVIRONMENT_BOOTBLOCK already. This patch drops the CONFIG_C_ENVIRONMENT_BOOTBLOCK symbol and adds CONFIG_ROMCC_BOOTBLOCK where needed. Change-Id: I773a76aade623303b7cd95ebe9b0411e5a7ecbaf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-11-11drivers/intel/fsp2_0: move common cbmem_top_chipset to fsp driverMichael Niewöhner
The common cbmem_top_chipset implementation uses the FSP bootloader HOB, thus move it to the fsp driver which is a more appropriate place. Change-Id: I914df51a7414eb72416f816ff8375a13d5716925 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36620 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: David Guckian Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-10soc/intel/common/sa: Remove EBDA dependencyArthur Heymans
Saving cbmem_top across stages is not needed anymore so EBDA should not be used. The guard to cbmem_top_chipset implementation was inappropriate. Change-Id: Ibbb3534b88de4f7b6fc39675a77461265605e56e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2019-11-03cpu/x86/tsc: Flip and rename TSC_CONSTANT_RATE to UNKNOWN_TSC_RATEKyösti Mälkki
The x86 timers are a bit of a mess. Cases where different stages use different counters and timestamps use different counters from udelays. The original intention was to only flip TSC_CONSTANT_RATE Kconfig to NOT_CONSTANT_TSC_RATE. The name would be incorrect though, those counters do run with a constant rate but we just lack tsc_freq_mhz() implementation for three platforms. Note that for boards with UNKNOWN_TSC_RATE=y, each stage will have a slow run of calibrate_tsc_with_pit(). This is easy enough to fix with followup implementation of tsc_freq_mhz() for the platforms. Implementations with LAPIC_MONOTONIC_TIMER typically will not have tsc_freq_mhz() implemented and default to UNKNOWN_TSC_RATE. However, as they don't use TSC for udelay() the slow calibrate_tsc_with_pit() is avoided. Because x86/tsc_delay.tsc was using two different guards and nb/via/vx900 claimed UDELAY_TSC, but pulled UDELAY_IO implementation, we also switch that romstage to use UDELAY_TSC. Change-Id: I1690cb80295d6b006b75ed69edea28899b674b68 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-02timestamps: COLLECT_TIMESTAMPS is mostly optionalKyösti Mälkki
It is a user-visible option and enabled by default for ARCH_X86, some consider it as debugging aid only. Therefore platform design should not depend on it. It must remain selected with CHROMEOS and boards are allowed to explicitly select it as well. For siemens/mc_bdx1,mc_aplX boot time will be increased due the use of get_us_since_boot() with COLLECT_TIMESTAMPS=n. When unable to determine if N seconds has elapsed from boot, this turns into a delay of N seconds. Change-Id: I6ee4195d266440143344781d39db9578cd8bdcb3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-11-02soc/intel/common/pch: move EBDA Kconfig to soc levelMichael Niewöhner
EBDA is not PCH related, thus move the Kconfig to the appropriate socs. Change-Id: I216871ad1a8dd5bc294062a4e9b54eb51f71b781 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-02soc/intel/skylake: select the new SGX Kconfig option for LT_LOCK_MEMORYMichael Niewöhner
Select the new SGX Kconfig option for LT_LOCK_MEMORY. Change-Id: I8b422ae50d11815ead10bfd5a8b47a13daa82821 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-10-26soc/intel/skylake: drop support for FSP 1.1Michael Niewöhner
This drops support for FSP 1.1 in soc/intel/skylake, after all boards have been migrated to FSP 2.0, which is backwards compatible. Any moving of files happens in a follow-up commit to make review easier. Change-Id: I0dd2eab0edfda0545ff94c3908b8574d5ad830bd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35813 Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-23soc/intel/skylake: lock AES-NI MSRMichael Niewöhner
Lock AES-NI register to prevent unintended disabling, as suggested by the MSR datasheet. Successfully tested by reading the MSR on X11SSM-F Change-Id: I97a0d3b1b9b0452e929ca07d29c03237b413e521 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35188 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-10soc/intel/skylake: Add option to toggle Hyper-ThreadingPatrick Rudolph
Tested on Supermicro X11SSH-TF. Change-Id: I3ebab68ff868c78105bb4b35abffb92f3ccf1705 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-09-02security/intel: Add TXT infrastructurePatrick Rudolph
* Add Kconfig to enable TXT * Add possibility to add BIOS and SINIT ACMs * Set default BIOS ACM alignment * Increase FIT space if TXT is enabled The following commits depend on the basic Kconfig infrastructure. Intel TXT isn't supported until all following commits are merged. Change-Id: I5f0f956d2b7ba43d4e7e0062803c6d8ba569a052 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2019-08-11arch/x86: Flip option NO_CAR_GLOBAL_MIGRATIONKyösti Mälkki
It is easier to track CAR_GLOBAL_MIGRATION which is the approach to be deprecated with the next release. This change enforces new policy; POSTCAR_STAGE=y is not allowed together with CAR_GLOBAL_MIGRATION=y. Change-Id: I0dbad6a14e68bf566ac0f151dc8ea259e5ae2250 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-08-11arch/x86: Enable POSTCAR_CONSOLE by defaultKyösti Mälkki
Almost all platforms force it on. Make it enabled by default but under user control to optionally disable it. Change-Id: I6b0f19c8bfd6ffed93023d57a1d28ca6acc06835 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2019-08-08soc/intel/{APL, BSW, SKL}: Remove unused CPU_ADDR_BITS kconfigSubrata Banik
This patch removes CONFIG_CPU_ADDR_BITS kconfig from soc/intel/<soc>/Kconfig as not getting used anymore. Change-Id: Ie7fa386c9c0aae19da1fbd09407494d9812247a4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34768 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-08lib/stage_cache: Refactor Kconfig optionsKyösti Mälkki
Add explicit CBMEM_STAGE_CACHE option. Rename CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to TSEG_STAGE_CACHE. Platforms with SMM_TSEG=y always need to implement stage_cache_external_region(). It is allowed to return with a region of size 0 to effectively disable the cache. There are no provisions in Kconfig to degrade from TSEG_STAGE_CACHE to CBMEM_STAGE_CACHE. As a security measure CBMEM_STAGE_CACHE default is changed to disabled. AGESA platforms without TSEG will experience slower S3 resume speed unless they explicitly select the option. Change-Id: Ibbdc701ea85b5a3208ca4e98c428b05b6d4e5340 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-02soc/intel/common/pch: Move thermal kconfig selection into common/pchSubrata Banik
This patch moves SOC_INTEL_COMMON_BLOCK_THERMAL selection from respective soc/intel/{skl/cnl/icl} to common/pch/Kconfig. Change-Id: I7c9c8a87cfc5cb4c2fa8b215e56cc35c1f0cce28 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34650 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-02soc/intel/skylake: Make use of common thermal code for SKLSubrata Banik
This patch ensures skylake soc is using common thermal code from intel common block. TEST=Build and boot soraka Change-Id: I0812daa3536051918ccac973fde8d7f4f949609d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34648 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-09arch/x86: Flip HAVE_MONOTONIC_TIMER defaultKyösti Mälkki
Change-Id: Id56139a3d0840684b13179821a77bc8ae28e05ae Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-09cpu/x86: Flip SMM_TSEG defaultKyösti Mälkki
This is only a qualifier between TSEG and ASEG. Change-Id: I8051df92d9014e3574f6e7d5b6f1d6677fe77c82 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-21soc/intel/skylake: Clean up KconfigArthur Heymans
This does the following: - select MAINBOARD_USES_FSP2_0 on Kabylake (does not support FSP1.1) - Remove stale Kconfig option on intel/saddlebrook - select SOC_INTEL_KABYLAKE on intel/kblrvp Change-Id: I64f48eeb00150aea039d533b0ac471fdd8483b90 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-03soc/intel: Replace UART_BASE() and friends with a KconfigNico Huber
Re-add the Kconfig CONSOLE_UART_BASE_ADDRESS. It was lost by accident on APL at least. It is used outside of soc/intel/ scope, e.g. to con- figure SeaBIOS. As we only ever configure a single UART for the coreboot console, we don't need different addresses for each possible UART. Which saves us a lot of code. Change-Id: I28e1d98aa37a6acb57b98b8882fc4fa131d5d309 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-30vboot: refactor OPROM codeJoel Kitching
The name OPROM is somewhat inaccurate, since other steps to bring up display and graphics are needed depending on mainboard/SoC. This patch cleans up OPROM code nomenclature, and works towards the goal of deprecating vboot1: * Rename CONFIG_VBOOT_OPROM_MATTERS to CONFIG_VBOOT_MUST_REQUEST_DISPLAY and clarify Kconfig description * Remove function vboot_handoff_skip_display_init * Remove use of the VbInit oflag VB_INIT_OUT_ENABLE_DISPLAY * Add |flags| field to vboot_working_data struct * Create VBOOT_FLAG_DISPLAY_REQUESTED and set in vboot_handoff BUG=b:124141368, b:124192753, chromium:948529 TEST=make clean && make test-abuild TEST=build and flash eve device; attempt loading dev/rec modes BRANCH=none Change-Id: Idf111a533c3953448b4b9084885a9a65a2432a8b Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-28soc/intel/common: Move support to log XHCI wake eventsKarthikeyan Ramasubramanian
The policy to identify and log the XHCI wake events is similar between skylake and apollolake. Hence move the similar parts to a common location. BUG=b:123429132 BRANCH=None TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up events due to USB are logged into the event logs. 6 | 2019-03-21 09:22:18 | S0ix Enter 7 | 2019-03-21 09:22:22 | S0ix Exit 8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9 9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13 10 | 2019-03-21 09:23:20 | ACPI Enter | S3 11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9 12 | 2019-03-21 09:23:30 | ACPI Wake | S3 13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13 Change-Id: Ia6643342e3292984e422ff3c3fcd4bc0d99f947e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-25vboot: remove VBOOT_EC_SLOW_UPDATE Kconfig optionJoel Kitching
This option has been relocated to depthcharge: https://crrev.com/c/1524806 BUG=b:124141368, b:124192753 TEST=Build and deploy to eve TEST=util/lint/checkpatch.pl -g origin/master..HEAD TEST=util/abuild/abuild -B -e -y -c 50 -p none -x TEST=make clean && make test-abuild CQ-DEPEND=CL:1524806 BRANCH=none Change-Id: Ib4a83af2ba143577a064fc0d72c9bc318db56adc Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31909 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-01soc/intel/skylake: Unify serial IRQ optionsNico Huber
We had two ways to configure the serial IRQ mode. One time in the devicetree for FSP and one time through Kconfig for coreboot. We'll use `enum serirq_mode` from soc/intel/common/ as a devicetree option instead. As the default is `quiet mode` here and that is the most common mode, this saves us a lot of lines. In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting settings in devicetree and Kconfig. We'll maintain the `continuous` selection, although it might be that coreboot overrode this earlier on the kblrvps. Note: A lot of Google boards have serial IRQ enabled, while the pin seems to be unconnected? Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-18soc/intel/skylake: Use real common code for VMX initNico Huber
Use the common VMX implementation, and set IA32_FEATURE_CONTROL lock bit per Kconfig *after* SGX is configured (as SGX also sets bits on the IA32_FEATURE_CONTROL register). As it is now correctly based on a Kconfig, the `VmxEnable` devicetree setting vanishes. Test: build/boot google/[chell,fizz], observe Virtualization enabled under Windows 10 when VMX enabled and lock bit set. Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/29682 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-28soc/intel/skylake: select FSP_M_XIP if MAINBOARD_USES_FSP2_0Matt DeVillier
Select FSP_M_XIP if MAINBOARD_USES_FSP2_0, since all SkyKabylake boards require FSP-M XIP when FSP 2.0 is used, and since not having it selected results in a non-booting image. Also, put select FSP_T_XIP if FSP_CAR in proper alphabetical order. Change-Id: I6d3986eda18297b12490cefb236f5de5faca6550 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/31110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-01-28soc/intel/{apl,skl}: Drop redundant `select RTC`Nico Huber
RTC is now implicitly selected through SOC_INTEL_COMMON_BLOCK_RTC and SOC_INTEL_COMMON_PCH_BASE. Change-Id: I1885c419cfe318b75f3bda6220d4a6f6a8e26575 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31113 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-01-14console: Change BOOTBLOCK_CONSOLE default to `y`Nico Huber
Invert the default instead of selecting it everywhere. Restores the ability to use its Kconfig prompt. Beside Qemu targets, the only platforms that didn't select it seem to be samsung/exynos5420, intel/cannonlake, and intel/icelake. The latter two were about to be patched anyway. Change-Id: I7c5b671b7dddb5c6535c97c2cbb5f5053909dc64 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/30891 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-09soc/intel: Clean mess around UART_DEBUGNico Huber
Everything is wrong here, the Kconfig symbols are only the tip of the iceberg. Based on Kconfig prompts the SoC code performed pad configu- rations! I don't see why the person who configures coreboot should have the board schematics at hand. As a mitigation, we remove the prompts for UART_DEBUG, which is renamed to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say what it's about), and for UART_FOR_CONSOLE in case the former is selec- ted. Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/29573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-12-29soc/intel/skylake: Remove romcc related Kconfig optionArthur Heymans
Change-Id: I9090be3ccaa8a61312293e9da3679a752a908062 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-24Remove intel/skylake/bootblock/timestamp.incKyösti Mälkki
Platform has been moved to C_ENVIRONMENT_BOOTBLOCK and this file was for romcc bootblock. Change-Id: I2c249b18edd41c9a7798400d24b1c9228422d59b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-23soc/intel/skylake: Drop FSP_CAR optionsNico Huber
It's not implemented for Skylake, all combinations that try to enable it either result in Kconfig or linker errors. Move `config SKIP_FSP_CAR` into drivers/intel/fsp1_1 where it's effective. TEST=Built Intel/Kunimitsu (FSP1.1) and Intel/KBLRVP8 (FSP2.0) default configs with and without this patch: binaries stay the same. Change-Id: Iae0a2d2c7fd7a71ed24118564e6080c4789cda28 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/29533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-11-19soc/intel/{common, skylake}: Make ASPM enabling as common PCH featureSubrata Banik
This patch moves required Kconfig selection for enabling ASPM feature (like clk_pm, L1 state etc) from soc code to intel common pch base code. TEST=Run lspci -vvv | grep ASPM The output shows the ASPM L1 is enable for pci devices Change-Id: Ic77602a75f0c9ccf28ebfd57e53433dc90985a16 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-16soc/intel/{broadwell,skylake}: Remove unused SERIAL_CPU_INITElyes HAOUAS
Change-Id: I2296ab3c53a82ee990649e35e1370e1dd304e392 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-07soc/intel/skylake: Add FSP CAR support for kabylakePraveen hodagatta pranesh
Kabylake RVP11 uses FSPT to support Intel security features like bootguard verify boot and measured boot. This patch add FSP CAR support for kabylake by programming tempraminit parameters in fspcar.c and also add FSP_T_XIP default if FSP_CAR is selected in order to relocate FSPT binary while adding it in CBFS so that it can be executed in place. BUG=None TEST=Build and Boot to UEFI payload on kabylake RVP11 board and verified for successful FSP CAR setup. Change-Id: Id180ff9191d734c581ba7bf3879eaa730a799b52 Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29433 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-27soc/intel/*: Make FSP header path user configurablePatrick Georgi
Required to compensate for Chrome OS' tree differences Change-Id: I01fe80b55c69ff57da1c96a76bd1d9b5a2d4a9a8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/29293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-10-23soc/intel/common/block/gpio: Allow GPI to be dual-routedFurquan Shaikh
This change adds new macros to GPIO common library helpers to allow a GPI pad to be dual routed using PAD_CFG_GPI_DUAL_ROUTE. It also adds a helper macro to configure a pad for IRQ and wake. Above macros are guarded using a newly added Kconfig option SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT that is selected only by SoCs that have been validated to allow dual route of GPIs. Currently, this config is selected only for APL/GLK/SKL/KBL that have been validated to work with dual-routing of GPIs for IRQ and wake. BUG=b:117553222 Change-Id: Iaa623d2d78a50f1504e3abe9a47a5a663693aead Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/29188 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-22intel: Use CF9 reset (part 2)Patrick Rudolph
Make use of the common CF9 reset in SOC_INTEL_COMMON_RESET. Also implement board_reset() as a "full reset" (aka. cold reset) as that is what was used here for hard_reset(). Drop soc_reset_prepare() thereby, as it was only used for APL. Also, move the global-reset logic. We leave some comments to remind us that a system_reset() should be enough, where a full_reset() is called now (to retain current behaviour) and looks suspicious. Note, as no global_reset() is implemented for Denverton-NS, we halt there now instead of issuing a non-global reset. This seems safer; a non-global reset might result in a reset loop. Change-Id: I5e7025c3c9ea6ded18e72037412b60a1df31bd53 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/29169 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-10-12drivers/intel/fsp2_0: Hook up IntelFSP repoPatrick Georgi
With https://github.com/IntelFsp/FSP/pull/4 merged, this allows using Intel's FSP repo (that we mirror) to build a complete BIOS ifd region with a simple coreboot build, automatically drawing in headers and binaries. This commit covers Apollolake, Coffeelake, Skylake, and Kabylake. Skylake is using Kabylake's FSP since its own is FSP 1.1 and Kabylake's also supports Skylake. Another candidate (given 3rdparty/fsp's content) is Denverton NS, but it requires changes to coreboot's FSP bindings to become compatible. Cannonlake, Whiskeylake require an FSP release. Change-Id: I8d838ca6555348ce877f54e95907e9fdf6b9f2e7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28593 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-10-06soc/intel/.../hda: Add and use config for initialization of HDA codecsFurquan Shaikh
Config option SOC_INTEL_COMMON_BLOCK_HDA is currently used for initialization of HDA codecs only. This prevents adding of any static devices under the HDA device node. However, there can be boards which want to add devices under HDA node (e.g. nocturne that wants to provide DMIC properties to OS) without performing any codec initialization using the HDA. This change: 1. Adds a new config option SOC_INTEL_COMMON_BLOCK_HDA_VERB that can be set explicitly by the boards that want to perform codec initialization. 2. Uses newly added config option is used to guard the initialization functions for the codec. Rest of the device operations can still be used by all the other boards without having to use HDA codec initialization. 3. Selects the newly added option SOC_INTEL_COMMON_BLOCK_HDA_VERB in kblrvp which is the only board enabling HDA codec initialization using common block code. 4. Selects original config SOC_INTEL_COMMON_BLOCK_HDA for skylake SoC. Above changes need to be bundled and pushed in as a single change in order to avoid breaking existing users. BUG=b:112888584 Change-Id: Ie6f39c13a801833b283120a2d4b6f6175688999c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/28806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-09-21soc/intel/skylake: Include some microcode blobsArthur Heymans
This included the microcode for some CPUID's found in soc/intel/skylake/bootblock/report_platform.c (others are likely pre-release SKU's) The amount of FIT entries needed is currently 7 so setting CPU_INTEL_NUM_FIT_ENTRIES is set to a safe 10 will be able to fit them all. Change-Id: I3ba504a07b2697fe55ff8f28a934f761ae05a4ec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23139 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-09-14soc/intel/denverton_ns: Enable common block PMCJulien Viard de Galbert
Mainly update headers to build. Added option PMC_GLOBAL_RESET_ENABLE_LOCK to remove function configuring the global reset through PMC base. On denverton the global reset lock is not in PMC base but in the PCI registers so this code cannot be shared. Change-Id: I9ace70862cab63f8355252d034292596c7eab1fd Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net> Reviewed-on: https://review.coreboot.org/25426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Evandro Luiz Hauenstein <kingsumos@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-09-13src/*/intel/: clarify Kconfig options regarding IFDStefan Tauner
HAVE_INTEL_FIRMWARE is used to enable certain options that rely on a valid Inter Flash Descriptor to exist. It does *not* identify platforms or boards that are capable of running in descriptor mode if it's valid. Refine the help text to make this clear. Introduce a new option INTEL_DESCRIPTOR_MODE_CAPABLE that does simply declare that IFD is supported by the platform. Select this value everywhere instead of the HAVE_INTEL_FIRMWARE and default HAVE_INTEL_FIRMWARE to y if INTEL_DESCRIPTOR_MODE_CAPABLE is selected. Move the QEMU Q35 special case (deselection of HAVE_INTEL_FIRMWARE) to the mainboard directory. Change-Id: I4791fce03982bf0443bf0b8e26d9f4f06c6f2060 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: https://review.coreboot.org/28371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-20soc/intel/common/block: Move common uart function to block/uartSubrata Banik
This patch moves uart functions which are common across multiple soc to block/uart. This will remove redundant code copy from soc {skylake/apollolake/cannonlake}. BUG=b:78109109 BRANCH=none TEST=Build and boot on KBL/APL/CNL platform. Change-Id: I109d0e5c942e499cb763bde47cb7d53dfbf5cef6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-12drivers/intel/gma: Unify VBT related Kconfig namesNico Huber
Shuffle words and drop the _DATA_FILE suffix. Change-Id: I0b0d50ea729e5580c0bc7b43f250ff387ce59cfc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-06arch/x86: Make RELOCATABLE_RAMSTAGE the defaultKyösti Mälkki
No need to provide an option to try disable this. Also remove explicit ´select RELOCATABLE_MODULES' lines from platform Kconfigs. Change-Id: I5fb169f90331ce37b4113378405323ec856d6fee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/26815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-06soc/intel/{cannonlake, skylake}: Select Gen-6 PCH binding for SKL/CNLSubrata Banik
This patch creates a glue layer between SOC and common block IPs in terms of PCH. All common IP blocks now can be selected based on SOC_INTEL_COMMON_PCH_BASE config option. BUG=none BRANCH=b:78109109 TEST=Build and boot Cannonlake RVP and EVE. Change-Id: I4e1f009489f2d8338ae94b78d7e9eb3f88a85d99 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-05-31soc/intel/skylake: Select common P2SB codeSubrata Banik
This patch select CONFIG_SOC_INTEL_COMMON_BLOCK_P2SB to include common p2sb code block. BUG=b:78109109 BRANCH=none TEST=Build and boot EVE. Change-Id: I3f6aa6398e409a05a35766fb7aeb3aa221dd3970 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26165 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10soc/intel/common: prepare for lpss clock splitAaron Durbin
Apparently Intel had decided to use different clock speeds for some of its IP blocks in some of its designs. The i2c designware driver has already been moved into common code allowing for its own Kconfig value. That currently leaves SPI (UART isn't using the clock currently). Therefore, remove SOC_INTEL_COMMON_LPSS_CLOCK_MHZ and add SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ to allow for the different clock speeds present in the system for the various IP blocks. BUG=b:75306520 Change-Id: I6cb8c2de0ff446b6006bc37645fca64f2b70bf17 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/25608 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-30soc/intel/common/opregion: Get rid of opregion.cPatrick Rudolph
Get rid of custom opregion implementation and use drivers/intel/gma/opregion implementation instead. Test: boot Windows 10 on google/chell and google/edgar using Tianocore payload with GOP init, observe Intel graphics driver loaded and functional. Change-Id: I5f78e9030df12da5369d142dda5c59e576ebcef7 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21703 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-28soc/intel/skylake: Limit xDCI feature when VBOOT is enabledDuncan Laurie
Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb and the mainboards that had defined it were adjusted accordingly. This was tested on an Eve board with xDCI enabled in devicetree.cb to ensure the xDCI device is enabled in developer mode and disabled in normal mode. Change-Id: Ic3c84beac87452f17490de32082030880834501d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25365 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-28soc/intel/skylake: enable VMX supportMatt DeVillier
Use soc/common VMX block to enable VMX on supported devices. Change-Id: Iaa1a6201b431783d709c0509715fa8e8b1ce349a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2018-03-27soc/intel/skylake: Add NHLT config for max98373 codecDuncan Laurie
Add the NHLT configuration for the max98373 codec to skylake, taken directly from cannonlake. This will allow skylake/kabylake boards to use this codec. Change-Id: Ifb6bf2d31fda25b18d9b1ce2bb721255335d55e4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/25367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HARSHAPRIYA N <harshapriya.n@intel.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2018-03-22soc/intel/skylake: Define IFD_CHIPSETFurquan Shaikh
This change defines IFD_CHIPSET as sklkbl to allow ifdtool to set the right access control bits for SKL/KBL platforms. BUG=b:76098647 BRANCH=poppy TEST=Verified that the access control bits on KBL platforms are set correctly. Change-Id: I7b2131caa06d6a975e703262931ec0ea519a86aa Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-06soc/intel/skylake: sort CPU_SPECIFIC_OPTIONS and drop duplicateVadim Bendebury
ACPI_NHLT happens to be selected twice. BRANCH=none BUG=none TEST=generated fizz .config does not change Change-Id: Ic525ee07015deb88fff4c15cad9dbbeada8a4479 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://review.coreboot.org/23601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-31drivers/intel/fsp2_0: Unbind UDK2015 Kconfig from FSP2.0 driverSubrata Banik
Now SOC code can select the require UDK support package for any platform going forward with FSP2.0 model. Change-Id: Ie6d1b9133892c59210a659ef0ad4b59ebf9f1e45 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-17soc/intel/cannonlake: Add option to select FSP_CARSubrata Banik
This patch provides an option for non-chrome devices to make use of FSP-T for performing cache-as-ram initialization. Majority of IOTG users are using FSP-T for CAR implementation and aren't able to select FSP_CAR Kconfig from SoC without conflicting with existing CAR config. TEST=Ensure that both the Chrome platform and non Chrome OS platform can select either CAR implementation based on Kconfig options FSP_CAR or CAR_NEM_ENHANCED. By default Chrome platform choose CAR_NEM_ENHANCED Kconfig and non Chrome platforms choose FSP_CAR by default. Change-Id: If565b649fe1c2abdbcf0a740c15db7253c084ae7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22ic2/designware: Move Intel i2c logic to shared driverChris Ching
BUG=b:70232394 BRANCH=none TEST=emerge-reef coreboot emerge-glados Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-22soc/intel/skylake: Make use of common SMM code for SKLSubrata Banik
This patch ensures skylake soc is using common SMM code from intel common block. TEST=Build and boot soraka/eve Change-Id: I8163dc7e18bb417e8c18a12628988959c128b3df Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/22826 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-12-16soc/intel/common/fast_spi: implement spi_flash_ctrlr_protect_region()Aaron Durbin
In the fast spi support implement the callback for flash_protect(). This removes the need for having SOC_INTEL_COMMON_SPI_FLASH_PROTECT Kconfig option as well spi_flash_get_fpr_info() and separate spi_flash.[ch]. BUG=b:69614064 Change-Id: Iaf3b599a13a756262d3f36bae60de4f7fd00e7dc Signed-off-by: Aaron Durbn <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-12-07soc/intel/skylake: Make use of Intel common Graphics blockSubrata Banik
TEST=Build and boot soraka/eve. Change-Id: I416226d0374700cea6eea602f839c3d17f1f39a6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-28soc/intel/skylake: Make use of Intel common DSP blockSubrata Banik
TEST=Build and boot soraka/eve. Change-Id: I8be2a90dc4e4c5eb196af57045d2a46b7f0c9722 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-15soc/intel/skylake: Make use of common CSE code for skylakeSubrata Banik
TEST=Ensures global reset could able to reset system. Change-Id: I11ce1812a5a0aa2da6b414555374460d606e220e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-11soc/intel/skylake: Make use of Intel SPI common blockSubrata Banik
TEST=Build and boot soraka/eve Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I10de3ff75a3b063c4c46471e380bbbe2630c35f3 Reviewed-on: https://review.coreboot.org/22361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07soc/intel/kabylake: Add Dialog da7219 NHLT blob supportNaveen Manohar
Add APIs and required parameters for creating Dialog da7219 SSP endpoints in NHLT table. The use of a NHLT table is required to make audio work on the kabylake SoCs employing the internal DSP. The table describes the audio endpoints (render vs capture) along with their supported formats. BUG=b:68686020 TEST=check that NHLT table for da7219 is created properly Change-Id: I57b88873f1c59c8aadf8eec3c80a9d95165a2cc3 Signed-off-by: Naveen Manohar <naveen.m@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/22324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-05soc/intel/skylake: Add support in SKL for PMC common codeShaunak Saha
Change-Id: I3742f9c22d990edd918713155ae0bb1853663b6f Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/20499 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-03soc/intel/skylake: Enable common LPC IPRavi Sarawadi
Enable Skylake to use the new common LPC code. This will help to reduce code duplication and streamline code bring up. Change-Id: I042e459fb7c07f024a7f6a5fe7da13eb5f0dd688 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/20120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-02soc/intel/skylake: Use common/block/gpioHannah Williams
Other than switch to use common gpio implementation for skylake based platform, also apply the needed changes for purism board. Change-Id: I06e06dbcb6d0d6fe277dfad57b82aca51f94b099 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-22soc/intel/skylake: Use EBDA area to store cbmem_top addressSubrata Banik
This patch uses BIOS EBDA area to store relevent details like cbmem top during romstage after MRC init is done. Also provide provision to use the same EBDA data across various stages without reexecuting memory map algorithm. BRANCH=none BUG=b:63974384 TEST=Ensures HW based memmap algorithm is executing once in romstage and store required data into EBDA for other stage to avoid redundant calculation and get cbmem_top start from EBDA area. Change-Id: Ib1a674efa5ab3a4fc076fc93236edd911d28b398 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-04Kconfig: Move and rename ADD_VBT_DATA_FILEPatrick Rudolph
Move ADD_VBT_DATA_FILE to "Devices" menu and rename it to INTEL_GMA_ADD_VBT_DATA_FILE. Depend on Intel platforms to avoid confusing users of non-Intel platforms. The Intel GMA driver will use the vbt.bin, if present, to fill the ACPI OpRegion. Change-Id: I688bac339c32e9c856642a0f4bd5929beef06409 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-08-30soc/intel/{cannonlake,skylake}: Add active default value for UART_FOR_CONSOLESubrata Banik
This patch to avoid build bot hang issue due to no active default value for UART_FOR_CONSOLE kconfig option. Change-Id: I70ca5dc6c4bde6a119ad59d8c58955c96c042198 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21287 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/skylake: Add Kconfig option to select UART indexSubrata Banik
Skylake/Kabylake SOC has two possible ways to make serial console functional. 1. Legacy IO based access using Port 0x3F8. 2. LPSS UART PCI based access. This patch to provide option to select index for LPSS UART port: 0 = LPSS UART0, 1 = LPSS UART1, 2 = LPSS UART2 PCI based LPSS UART2 is by default enabled for Chrome Design. Change-Id: I9647820fe59b5d1a1001a611b9ae3580946da0ae Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/20996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-10soc/intel/common/uart: Refactor uart_common_initFurquan Shaikh
1. Create a new function uart_lpss_init which takes the UART LPSS controller out of reset and initializes and enables clock. 2. Instead of passing in m/n clock divider values as parameters to uart_common_init, introduce Kconfig variables so that uart_lpss_init can use the values directly without having to query the SoC. BUG=b:64030366 TEST=Verified that UART still works on APL and KBL boards. Change-Id: I74d01b0037d8c38fe6480c38ff2283d76097282a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/20884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-24soc/intel/skylake: Use common opregion implementationPatrick Rudolph
Enable SOC_INTEL_COMMON_GFX_OPREGION for all FSP versions. Allows to get rid of opregion.c, as it's no longer needed. Change-Id: I39190488e12917a09dbf7ee3947a33940ebc290b Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/20222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-07-20soc/intel/skylake: Remove dead `CONFIG_PRE_GRAPHICS_DELAY`Nico Huber
`CONFIG_PRE_GRAPHICS_DELAY` was only applied on a dead code path in `igd.c` that is guarded by always selected `CONFIG_ADD_VBT_DATA_FILE`. Nobody missed it for nearly a year, plus, it's not applied on the GOP path, let's drop it. Change-Id: I0b70cce3a3f2b50cb4e72c4d927b35510ff362a2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/20111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-10sgx: Move SGX code to intel/common/blockPratik Prajapati
CONFIG_SOC_INTEL_COMMON_BLOCK_SGX controls building. The SGX feature is still enabled from devicetree.cb. As of now this SGX init supports only KBL (SKL not tested). Support of SGX for new SOCs would be added incrementally in this common code base. Change-Id: I0fbba364b7342e686a2287ea1a910ef9a4eed595 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/20173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 05:28:41 +0000