summaryrefslogtreecommitdiff
path: root/src/soc/intel/meteorlake
AgeCommit message (Collapse)Author
2023-10-24soc/intel/meteorlake: Add PsysPmax configurationJakub Czapiga
psys_pmax_watts is configured in SoC node of devicetree. Value represents Watts the PSU provides. Zero means automatic/default configuration (not optimal). BUG=b:289853442 TEST=Build google/rex/ovis4es target board Change-Id: I69afa06110254f6384352c062891c0c9c0b23070 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76796 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20soc/intel/meteorlake: Set build time physical address reserved bitsJeremy Compostella
Meteor Lake TME bits [42-45] are reserved regardless of if the part supports TME or not. On a device with TME fused off, we noticed some reboot hangs which have been narrowed down to internal IP routing issues when the IA accesses the Input Output Manager (IOM) which is mapped at 0x3fff0aa0000 (0x3ff upper 32 bits). It turns out since TME is fused off, coreboot uses the full physical address size reported by CPUID MAXPHYADDR (46 bits). Therefore, it allocates thunderbolt memory range on 46 bits (0x3fff upper 32 bits). Since 4 of these bits are actually reserved, it seems that this address range is "stripped down" to 42 bits (=> 0x3ff upper 32 bits) resulting in potential conflict with other devices such as IOM. BUG=b:288978352 TEST=No reboot issue on rex with TME fused off Change-Id: I96ba23ab304257003c0413243d3ac8129ce31743 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78452 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-20device/device.h: Rename pci_domain_scan_busArthur Heymans
On all targets the domain works as a host bridge. Xeon-sp code intends to feature multiple host bridges below a domain, hence rename the function to pci_host_bridge_scan_bus. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I4e65fdbaf0b42c5f4f62297a60d818d299d76f73 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78326 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-10-19soc/intel/meteorlake: Update TBT PCIe Reg Map offsets for QSRavi Sarawadi
Within TBT PCIe, following register offsets have been updated for production silicon. Update ASL with new offsets. 1. MPC - Miscellaneous Port Configuration Register 2. RPPGEN - Root Port Power Gating Enable 3. SMSCS - SMI/SCI Status Register BUG=306026121 TEST= Check TBT PCIe Tunnel creation and device enumration. Change-Id: I0497f7108ef5046c2694aece232263582514a0c5 Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-19soc/intel: Improve CONFIG_ACPI_SOC_INTEL_SLP_S0_FREQ_HZ useJeremy Compostella
Commit bd9c562a9e0c6af65f5e798a17ba9a55892ef082 ("acpi: Configure slp-s0 residency counter frequency in LPIT table") led to jenkins reporting the following error: !!!!! Error: defined(CONFIG_ACPI_SOC_INTEL_SLP_S0_FREQ_HZ) used at src/include/acpi/acpi.h:457. Symbols of type 'hex' are always defined. Since hex Kconfig are always defined there is no need to test it being defined but also no need to handle zero or non-zero values. In addition: 1. This config was defined in Meteor Lake specific Kconfig file while it should actually be define closer to where it is being used (here soc/intel/common/block/acpi/Kconfig) and only set by the SoC Kconfig. 2. Once moved and under control of `SOC_INTEL_COMMON_BLOCK_ACPI_LPIT' gating (lpit.c), the Kconfig name needed to be adjusted to better fit its use. 3. Make Meteor Lake Kconfig sets the config but does not define it anymore. TEST=LPIT ACPI table Counter Frequency field is set to 0x2005 on rex Change-Id: I2083c9209e61be6180cca2c9f74097e2f4b4ce9a Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78458 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-10-18soc/intel/mtl: Set slp-s0 counter frequencySukumar Ghorai
System sleep time (SLP_S0 signal asserted) is measured in ticks, for Meteor Lake soc in 122us (i.e. ~8197Hz) granularity/ticks. Change-Id: I1e95cd69e941d4d72d5c36a07660ca07ee2499ba Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-10-18soc/intel/{adl, mtl}: Avoid redundant display init by joining to MBUSSubrata Banik
This patch ensures that the IGD joins the MBUS when the firmware splash screen feature is enabled (aka BMP_LOGO config is enabled). For ChromeOS platform, it prevents the i915 driver from reinitializing the display, which can save up to 75ms-80ms of boot time and eliminate a brief period of blank screen between the firmware splash screen and the OS login prompt. BUG=b:284799726 TEST=Able to build and boot google/rex. Change-Id: I36af167afa902053a987602d494a8830ad9b1b1a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-10-11Kconfig: Bring HEAP_SIZE to a common, large valuePatrick Georgi
We have a tiny HEAP_SIZE by default, except when we don't, and mainboards that override it, or not. Since memory isn't exactly at a premium these days, and unused heap doesn't cost anything extra, just crank it up to the highest value we have in the tree by default and remove all overrides. Change-Id: I918a6c58c02496e8074e5fba06e38d9cfd691020 Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78270 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-09soc/intel/meteorlake: Reserve IOE P2SB MMIO correctlyKane Chen
The original code only reserves IOM mmio, but there is other asl code that requires to program ioe p2sb mmio such as IOE PCIE clk request control. See \_SB.ECLK.CLKD in src/soc/intel/common/acpi/pcie_clk.asl TEST=as before: suspend_stress_test 50 cycle pass, type-c display OK on screebo Change-Id: Ie55f7975277b390f776e44596c42e426ba9cd235 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78252 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-07mb/google/{rex,ovis}: Disable package C-state auto demotionSukumar Ghorai
Package C-state auto demotion feature allows hardware to determine lower C-state as per platform policy. Since platform sets performance policy to balanced from hardware, auto demotion can be disabled without performance impact. Also, disabling this feature results soc to enter below PC8 state and additional power savings ~30mW in Local-Video-Playback scenario. BUG=b:303546334 TEST=Local build successfully & Boot to OS successfully - Also check platform enter PC8 state in local video playback - before this change: # iotools rdmsr 0 0xE2 -> 0x0000000060008008 - After # iotools rdmsr 0 0xE2 -> 0x0000000000008008 Change-Id: Ia4cf4a7cb6bd5eaae26197b55f9385c078960d7b Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78250 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-10-04soc/intel: Select GMA v2 for ADL, MTL, TGL to reflect port/pipe defsSubrata Banik
Intel GFX IP TRANS_DDI_FUNC_CTL register bit definitions have changed since Tiger Lake. This register is used to map ports and pipes to display controllers, so reflecting the correct status is important for detecting physical display end point devices. This patch ensures that ADL, MTL, and TGL SoCs choose GMA version 2 to properly reflect the updated port and pipe register definitions. BUG=b:299137940 TEST=Build and boot google/rex successfully. Change-Id: Ie2082747d18a5f136f410b1019be4d6c801617b1 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2023-10-04soc/intel/mtl: Select SOC_INTEL_CSE_LITE_PSR config for MeteorlakeKrishna Prasad Bhat
During CSE firmware downgrade, data is cleared. To preserve PSR data during downgrade, it needs to be backed up. Select SOC_INTEL_CSE_LITE_PSR config to ensure PSR backup related flow is executed on CSE Lite SKU. BRANCH=None BUG=b:273207144 TEST=Verify CSE firmware upgrade/downgrade on rex. Change-Id: I39af029a5f0c018a5db3ac68191764abfa9518ac Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76115 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-04soc/intel/mtl: Override SOC_INTEL_CSE_FW_PARTITION_CMOS_OFFSETKrishna Prasad Bhat
CSE firmware downgrade and PSR data backup flows involve global resets, there is a need to track the PSR data backup status across resets. In the subsequent patches, a CMOS structure to store PSR back-up status will be added. The current SOC_INTEL_CSE_FW_PARTITION_CMOS_OFFSET of 68 can only store cse_specific_info, as ramtop is at offset 100 and PSR back-up status structure will not be able to fit within the range. This patch overrides the SOC_INTEL_CSE_FW_PARTITION_CMOS_OFFSET to 161 to accommodate all CSE related info in adjacent CMOS memory. BUG=b:273207144 TEST=Verify CSE RW FW versions are stored in CMOS memory in rex. Change-Id: I8bae5245f93b99be15b4e59cfeffbc23eec95001 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78054 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-10-04soc/intel/mtl: Call cse_fill_bp_info early in romstageKrishna Prasad Bhat
Intel Platform Service Record(PSR) will be enabled on Meteor Lake platforms. cse_fw_sync actions happen in ramstage when PSR is enabled. To avoid the boot time penalty of sending the cse_get_bp_info in ramstage, call cse_fill_bp_info to get cse_bp_info response early in romstage and store in cbmem. This data can be later used in ramstage. BUG=b:273207144 TEST=Verify cse_bp_info is filled in romstage in rex. Change-Id: Ic0e8fb34f21ff07e182a7b848d38e9d329010028 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78056 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-09-23soc/intel/meteorlake: Reduce memory test sizeSubrata Banik
Enable upd to reduce size of the memory test. BUG=b:301441204 TEST=Able to build and boot google/rex. w/o this patch: 951:returning from FspMemoryInit 650,922 (79,560) w/ this patch: 951:returning from FspMemoryInit 618,490 (45,621) Change-Id: I903591ec749d270a98895dafb2d8f8d0b287c26a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78067 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-09-23soc/intel/meteorlake: Hook up UPD LowerBasicMemTestSizeSubrata Banik
Hook the newly exposed LowerBasicMemTestSize UPD up so that boards can configure it via devicetree. BUG=b:301441204 TEST=Verified by enabling/disabling the UPD on google/rex. Change-Id: Iec466aeaebd72f222d97f720a85bbb8c27e26325 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78066 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-20soc/intel/meteorlake: Add configs for pre-production siliconSubrata Banik
Certain Intel Meteor Lake specific features are only enabled in production silicon (not available in early SoC aka pre-production silicon). - SPI usage for production SoC is much optimized compared to pre- production silicon. - MIPI driver requires a way to identify between pre-prod vs prod silicon. This patch adds config options to select the Pre-Production aka Engineering Silicon (ES). The mainboard users can specify which underlying SoC is being used for the target platform. BUG=b:300652989 TEST=No change in the functionality, just added new configs. Change-Id: I60fe11c1151a3a6c290cd0105eb570cb78e81797 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2023-09-20soc/intel/meteorlake: Enable crashlogPratikkumar Prajapati
Enable SOC_INTEL_CRASHLOG and SOC_INTEL_IOE_DIE_SUPPORT Kconfig options. BUG=b:262501347 TEST=Able to build google/rex. Able to trigger and decode crashlog. Change-Id: I4beef7393090889fde8d67827035c3b57a3dbb34 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-09-17soc/intel/meteorlake: Implement cleanup and rearm functionsPratikkumar Prajapati
cpu_cl_cleanup() function checks if the SOC supports storage-off feature. This feature allows to turn off PUNIT SSRAM to save power. Enable the storage-off if it's supported. Enabling it also clears the crashlog records from PUNIT SSRAM. cpu_cl_rearm() function rearms the CPU crashlog. BUG=b:262501347 TEST=Able to build google/rex. Verified both features get asserted. Change-Id: Id9ba0f5db0b5d2bd57a7a21f178ef1e86ca63fae Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77239 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-16soc/intel/meteorlake: Generate new TME key on each warm bootAnil Kumar
relanding original commit 5013c60a871af8fbce8c38a1c342c454e5b8452f ("soc/intel/meteorlake: Generate new TME key on each warm boot") which was previously reverted by commit 19e66b7c951ce71a1b9bc20158af56e559f8a58f (Revert "soc/intel/meteorlake: Generate new TME key on each warm boot") due to consecutive reboot post warm reset issue. The consecutive reboot post warm reboot issue has been fixed with commit ba7a9eefcf4e571bc73d4be1141f676fc5547057 ("soc/intel/common: Fix invalid MADT entries creation"), hence, reattempting to land the original TME key related patch. BUG=299294328 TEST=Boot up the system, generate kernel crash using following commands: $ echo 1 > /proc/sys/kernel/sysrq $ echo "c" > /proc/sysrq-trigger System performs warm boot automatically. Once it is booted, execute following commands in linux console of the DUT and confirm ramoops can be read. $ cat /sys/fs/pstore/console-ramoops-0 Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I5d45d265ccef1a7d37669ea22a74b52e2f3ae20d Reviewed-on: https://review.coreboot.org/c/coreboot/+/77902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-15soc/intel/meteorlake: Remove the check for INFRSean Rhodes
Remove the check to follow the new flow that commit 9c348a7b7ea3 ("soc/intel/alderlake: Fix processor hang while plug unplug of TBT device") introduced. Processor hang is observed while hot plug unplug of TBT device. BIOS should execute TBT PCIe RP RTD3 flow based on the value of TBT_DMA_CFG_VS_CAP_9[30]. It should skip TBT PCIe RP RTD3 flow, if BIT30 in TBT FW version is not set. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie822b8e1fd7592a31275db8455519c4cc6ac02ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/77456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-15soc/intel/meteorlake: Remove space after a castElyes Haouas
Change-Id: Ibf28fbdf791e7aa2faa41f3059150bf5ff5d21d1 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77735 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-13soc/intel/{tigerlake,meteorlake}: Check ITBT FW versionSean Rhodes
The ensures that ITBT is ready to operate. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If60404a88208c632cd60e8aaa6ba70494eefbed2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77454 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-13soc/intel/{tigerlake,alderlake,meteorlake}: Start to unify the TCSS ACPISean Rhodes
The ACPI used for Tiger Lake, Alder Lake and Meteor Lake are very similar, so can be moved to shared code. This commit aligns minor difference between then, such as comments and tabs/spaces. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If6554c7ef9e83740d7ec5dcca6a9d7e32fb182db Reviewed-on: https://review.coreboot.org/c/coreboot/+/77453 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-12cpu/intel: Move is_tme_supported() from soc/intel to cpu/intelJeremy Compostella
It makes the detection of this feature accessible without the CONFIG_SOC_INTEL_COMMON_BLOCK_CPU dependency. BUG=288978352 TEST=compilation Change-Id: I005c4953648ac9a90af23818b251efbfd2c04043 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77697 Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-07soc/intel/meteorlake: Update LidStatus UPD dynamicallySubrata Banik
This patch ensures that the LidStatus UPD is passed a dynamic value, rather than always passing 1 (CONFIG_RUN_FSP_GOP enabled) for FSP 2.0 devices. Problem statement: * FSP-S GFX PEIM initializes the on-board display (eDP) even when the LID is physically closed, because LidStatus is always set to 1. * FSP-S skips external display initialization even when the LID is closed. Solution: * FSP-S GFX PEIM module understands the presence of an external display if LidStatus is not set, and tries to probe the other display endpoint. * Statically passing LidStatus as always enabled (aka 1) does not illustrate the exact device scenarios, so this patch updates LidStatus dynamically by reading the EC memory map offset. BUG=b:299137940 TEST=Able to build and boot google/rex to redirect the display using external HDMI monitor while LID is closed. Change-Id: I7d7b678227a6c8e32114de069af8455b8c1aa058 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-02soc/intel/meteorlake: Fix black screen after booting to OSSubrata Banik
This patch ensures that the VR configuration for IA, SA, and GFX is properly initialized, assigning zero values to VR causes a black screen (no display) issue. Problem Statement: Override CEP (Current Excursion Protection) value with zero aka set to disable results into black screen issue (no display). Solution: Keep CEP default enabled and don't override w/ zero value. w/o this patch: [SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[0] : 0x0 [SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[1] : 0x0 [SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[2] : 0x0 w/ this patch: [SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[0] : 0x1 [SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[1] : 0x1 [SPEW ] CPU_POWER_MGMT_VR_CONFIG : CepEnable[2] : 0x1 Change-Id: I8908e8b6c995390b559212d456db6ddf984448a3 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eran Mitrani <mitrani@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-09-01soc/intel/{adl,jsl,mtl,tgl}: Add ACPI name for GNA deviceMatt DeVillier
Add SA_DEV_SLOT_GNA definition to SoCs missing it, so the name resolves properly. TEST=tested with rest of patch train Change-Id: I31c8b14e5083fc8e212a4e32330125fa72696c73 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Signed-off-by: CoolStar <coolstarorganization@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-01soc/intel/meteorlake: Skip crashlog region with metadata tagPratikkumar Prajapati
Region with metadata tag contains information about BDF entry for SOC PMC SRAM and IOE SRAM. We don't need to parse this as we already define BDFs in soc/pci_devs.h for these SRAMs. Also we need to skip to region as it does not contain any crashlog data. BUG=b:262501347 TEST=Able to build google/rex. Able to trigger crashlog and decode correctly. Change-Id: Id8ed40b865cde8e89045f5c9e713398fcbff5890 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76834 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-01soc/intel/meteorlake: Validate CPU crashlog discovery table and recordsPratikkumar Prajapati
CPU crashlog discovery table and crashlog record is considered invalid if first 32bits of the table is either 0x0 (no crashlog) or 0xdeadbeef (invalid crashlog). Crashlog record is considered consumed if bit 31 is set. So in this case stop processing the subsequent records. BUG=b:289600699 TEST=Able to build and verified invalid records are skipped on google/rex. Change-Id: Ia81bd293a533217425e44473ae85b2115c85faf6 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76333 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-01soc/intel/meteorlake: Adjust discovery table offset based on CPUIDPratikkumar Prajapati
CPUID CPUID_METEORLAKE_B0 onwards the discovery table offset needs to be left-shifted by 3. Reference: EDS Vol 1 (640228) BUG=b:289600699 TEST=Able to boot google/rex with crashlog enabled. Change-Id: I90647fb6190a52b42298398263978beaf931b035 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-30soc/intel/meteorlake: Allow to override Fast VmodeJay Patel
This patch adds option to override Fast Vmode on Meteor Lake SoC. This requires CepEnable, EnableFastVmode, IccLimit FSPM UPDs in FSP header. If the hardware supports Fast Vmode, the FSPM will set the ICC limit value to the value passed from coreboot. With CepEnable and EnableFastVmode enabled, if IccLimit is not specified by coreboot, FSPM sets IccLimit as default value. If no values assigned to all the three CepEnable, EnableFastVmode and IccLimit, coreboot sets their values to 0 and Fast Vmode is disabled. BUG=b:286809233 TEST=In debug MTL FSP logs, the value of FSP parameters is as passed from coreboot including enable_fast_vmode, cep_enable, and fast_vmode_i_trip. Also, fast_vmode_i_trip value is passed to pcode using mailbox command without any error. This test done on google/rex board. Signed-off-by: Jay Patel <jay2.patel@intel.com> Change-Id: Id05dccac56c504523f9327babe0c6fbeff488ec2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75566 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-08-29Revert "soc/intel/meteorlake: Generate new TME key on each warm boot"Subrata Banik
This reverts commit 5013c60a871af8fbce8c38a1c342c454e5b8452f. Reason for revert: consecutive reboots are causing kernel panic. BUG=b:297153853 TEST=Able to perform 50 cycles of consecutive reboot after reverting this CL and it boots to the OS every single time(w/o any kernel panic). Change-Id: If6c96dcc62c706a522b98a1cf1dd1920ad6473a1 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77467 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-26soc/intel/meteorlake: Add PMC GPIO GPE group mappingCliff Huang
Add two missing mapping for GPIO GPE routes Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I3f0d13cf7c07201856e934f22efc4cc8c4ea5bf0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77423 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-24soc/intel/metorlake: Fix PMC GPIO group assignmentCliff Huang
Those values need to match with the ones defined in PMC PWRM GPIO CFG register. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I8e84df83caab794e2fe7186e89e78343c2b55fd0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-08-21meteorlake/include/soc/iomap: Remove unused HPET_BASE_ADDRESSElyes Haouas
Remove unused HPET_BASE_ADDRESS. It is already defined at <arch/hpet.h>. Change-Id: I8c517283e56915873b8e1798571642fd9d8a5764 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-08-20soc/intel/mtl: Enable IOE_PMC supportDinesh Gehlot
IOE_PMC support was not enabled on Meteor Lake platforms. This patch adds the bare minimum hooks to initialize and allocate a memory region for IOE operations. Additionally, this patch moves those IOE operations to a newly included IOE-specific file, Previously, PMC was responsible for these operations. BUG=b:287419766 TEST=build and verified on google/rex. Change-Id: I8bbc0b8a3e32dad5404c80bc7717ef07e3ec60b9 Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77261 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-18soc/intel/meteorlake: Implement `soc_is_ish_partition_enabled` overrideSubrata Banik
This patch implements `soc_is_ish_partition_enabled()` override to uniquely identify the SKU type between ISH and non-ISH to conclude if ISH partition is enabled and need to retrieve the ISH version from CSE FPT by sending a HECI command. BUG=b:285405031    TEST=Able to uniquely identify the ISH SKUs while booting     to google/rex_ec_ish to dump the ISH version. Change-Id: I48358ad9e2e582e8b2274cbf4655de01f8792e6c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77177 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-17soc/intel/meteorlake: Enable LZ4 compression for logo CBFS fileSubrata Banik
This patch selects LZ4 decompression for logo CBFS file. Able to save 2ms of the boot time when HAVE_FSP_LOGO_SUPPORT config is enabled. However, the compressed BMP logo size is increased by ~2KB. Raw BMP Image size is ~97KB. BUG=b:284799726 TEST=Able to see pre-boot splash screen while booting google/rex with 32MB (W25Q256JWEIM) SPI-Flash. w/o this patch: sudo cbfstool image-screebo4es.bin print -r FW_MAIN_A FMAP REGION: FW_MAIN_A Name Offset Type Size Comp ... ... logo.bmp 0x167480 raw 6172 LZMA (97078 decompressed) ... 15:starting LZMA decompress (ignore for x86)  849,090 (1,022) 16:finished LZMA decompress (ignore for x86)  851,207 (2,116) w/ this patch: sudo cbfstool image-screebo4es.bin print -r FW_MAIN_A FMAP REGION: FW_MAIN_A Name Offset Type Size Comp ... ... logo.bmp 0x167480 raw 8568 LZ4 (97078 decompressed) ... 17:starting LZ4 decompress (ignore for x86)   849,419 (1,279) 18:finished LZ4 decompress (ignore for x86)   849,559 (140) Change-Id: I856c39146a5ec0faf44c1cd37fa7c0d7296bf673 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-08-17soc/intel: Update all references to ESE as ISSEUsha P
Intel has rebranded ESE as ISSE (Intel Silicon Security Engine),so all references to ESE is updated to ISSE in the current coreboot code. BUG=None TEST=Build all the variants based on Intel Meteor Lake SoC Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I1f8785704706d56a35e94a0f3386bc551cd1f263 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77241 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-11soc/intel/meteorlake: Add provision to show pre-boot splash screenSubrata Banik
This patch adds the ability to show a pre-boot splash screen on Meteor Lake systems using FSP-S. The patch calls into `fsp_convert_bmp_to_gop_blt()` when the `BMP_LOGO` config is enabled. This function converts a BMP file to a BLT buffer, which is then used by FSP-S to render the splash screen. Additionally, increase the heap size (malloc'able size) upto 512KB (when BMP_LOGO config is enabled) to accommodate high resolution logo file. BUG=b:284799726 TEST=Able to see pre-boot splash screen while booting google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3608bfacc21574e12cde0e2012a16e6388ce54df Reviewed-on: https://review.coreboot.org/c/coreboot/+/76922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-08-09Revert "soc/intel/{adl, cmn/pcie}: Fix ASPM configuration enum definitions"Jeremy Soller
This reverts commit 5dfec718290609dc0fd0331070ad703107e0b7e7. Reason for revert: This change made it impossible to disable ASPM by FSP parameter. ASPM_DISABLE would result in the FSP parameter not being programmed, causing it to be the FSP default value instead. This additionally fixes MTL to match ADL. Change-Id: I60c0ea08513fcb0035449ea3fef1681de528c545 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75280 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-08ACPI: Add helper fill_fadt_extended_pm_io()Kyösti Mälkki
Once platform code has filled in the (legacy) ACPI PM register map, added function will fill in the extended entries in FADT. TEST=samsung/lumpy and amd/mandolin FADT stays unchanged. Change-Id: I90925fce35458cf5480bfefc7cdddebd41b42058 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-08-04soc/intel/meteorlake: Hook up UPD for C1 C-state auto-demotionSukumar Ghorai
FSP has a parameter to enable/disable c1-state autodemotion feature. Boards/Baseboard can choose to use this feature as per requirement. This patch hooks up this parameter to devicetree. BUG=b:286328295 TEST=Check code compiles & boot google/rex, and correct value has been passed to FSP. Change-Id: I2cc60bd297271fcb3000c0298af71208e3be60fc Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76826 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-08-04soc/intel/mtl: Change default for debug consent from 3 to 6Kane Chen
USB DBC is very helpful for SoC debug. TraceHub needs to be enabled in coreboot if debug consent == 2 or 4. Debug consent == 6 enables USB DBC without TraceHub enabled. This patch updates the Kconfig help text to meet PlatformDebugOption in MTL and changes debug consent to 6 in default to provide basic SoC debug capability. TEST=Boot to OS on screebo and DBC connection is OK. Change-Id: Ic12528bdd8b1feda7f1b65045c863341f932d3a2 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76880 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-08-04soc/intel/meteorlake: Generate new TME key on each warm bootPratikkumar Prajapati
Enable config TME_KEY_REGENERATION_ON_WARM_BOOT for Intel Meteor Lake SOCs. This config allows Intel FSP to programs TME engine to generate a new key for each warm boot and exclude CBMEM region from being encrypted by TME. Bug=b:276120526 TEST= Boot up the system, generate kernel crash using following commands: $ echo 1 > /proc/sys/kernel/sysrq $ echo "c" > /proc/sysrq-trigger System performs warm boot automatically. Once it is booted, execute following commands in linux console of the DUT and confirm ramoops can be read. $ cat /sys/fs/pstore/console-ramoops-0 S0ix also tested and found working. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I3161ab99b83fb7765646be31978942f271ba1f9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-08-03soc/intel/meteorlake: Set UPDs for TME exclusion range and new key genPratikkumar Prajapati
Set UPD params GenerateNewTmeKey, TmeExcludeBase, and TmeExcludeSize when TME_KEY_REGENERATION_ON_WARM_BOOT config is enabled. These UPDs are programmed only when INTEL_TME is enabled. Bug=b:276120526 TEST=Able to build REX platform. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: Ib8d33f470977ce8db2fd137bab9c63e325b4a32d Reviewed-on: https://review.coreboot.org/c/coreboot/+/75626 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-25soc/intel/meteorlake: Remove dummy CPU_SPECIFIC_OPTIONSElyes Haouas
Change-Id: I0f9299d4b7417efac0d5fba39d40b97d6c3a1926 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-19soc/intel/{adl, mtl}: Reduce CAR usage while using FSP debug binariesSubrata Banik
Reduces the CAR (Cache-as-RAM) variable usage while using FSP debug binaries, which can prevent the CAR from becoming too full and unable to integrate other CAR global variables. This change has the following downsides: - FSP debug output into the cbmem buffer will be partial. To test this change, you can: Build and boot google/rex without any function impact with non-serial and serial FSP debug image (unless what has been documented here). Bug=b:284124701 TEST=Able to build and boot google/rex. Change-Id: I16a1aa25fd32327d03a37381a696c86c95014ba0 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-07-18soc/intel/meteorlake: Enable PCIE_CLOCK_CONTROL_THROUGH_P2SBKane Chen
On Intel Meteor Lake (MTL), PCIe CLK control register is accessed by P2SB on IOE/SOC die. So this patch does: 1. Enable PCIE_CLOCK_CONTROL_THROUGH_P2SB 2. Include pcie_clk.asl 3. Set the correct IOE_DIE_CLOCK_START for MTL-U/H. BUG=b:288976547, b:289461604 TEST=Test on google/screebo and found the pcie clock is on/off properly and sdcard PCIe port doesn't block S0ix with RTD3 cold enabled. Change-Id: I6788ae766f36c9a0d4910fda1d6700f20ce73ea8 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76356 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-18soc/intel/meteorlake: Include IOE PCR register accessSubrata Banik
This patch includes the ioe_pcr.asl file as Intel Meteor Lake has support for IOE die. BUG=b:290856936 TEST=Able to build and boot google/rex. Change-Id: Ia534dbc0db5e54e173da9cdf475a7eb2bfda9e2f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76410 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-18soc/intel/meteorlake: Add IOE P2SB Base AddressSubrata Banik
This patch introduces a new config named IOE_PCR_BASE_ADDRESS to define P2SB base address. BUG=b:290856936 TEST=Able to build and boot google/rex. Change-Id: I289358f9c53b557a397bd7186e6b7419c5d8c954 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76411 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-13soc/intel: Rename pcr.asl to pch_pcr.aslSubrata Banik
The PCR (Private Configuration Register) is applicable to access the P2SB register space starting with the Intel SkyLake generation of SoC. Prior to Intel Meteor Lake SoC generation, the only P2SB existed inside the PCH die. Starting with Meteor Lake SoC, there are two P2SB, one in SoC die (same as PCH die for U/H SoC) and another in IOE die. This patch renames pcr.asl to pch_pcr.asl to reflect the actual source of the P2SB IP in the die (i.e., SoC die or PCH die). BUG=b:290856936 TEST=Able to build and boot google/rex. Change-Id: Idb66293eaab01e1d4bcd4e9482157575fb0adf04 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76407 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-12soc/intel/*/pmc.c: Use newer function for resource declarationsArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I852d6daebdcb8461c18e7c0eaf1c54ad7c59c0c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-07-05soc/intel/meteorlake: Set TCC to 90°CSumeet Pawnikar
Set tcc_offset value to 20 in chipset for Thermal Control Circuit (TCC) activation feature for meteorlake silicon. Also, remove tcc_offset default value from rex baseboard and variants. BUG=b:270664854 BRANCH=None TEST=Build FW and test on rex board Change-Id: Ieec1b7e0873eef46a56e612ed1d9445019b1f4a9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76232 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-05soc/intel/meteorlake: add power limits for 28W SKUSumeet Pawnikar
Add power limit values for Meteor Lake 28W SKU. Reference: Intel MTL-UH_Power_Map_Rev1p2, doc: 640982 BRANCH=None BUG=b:289854108 TEST=Build FW Change-Id: I0b4741185278913d11d902d53345ae8ccebb18f8 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76239 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-07-05soc/intel/meteoerlake: add support for 28W SKUSumeet Pawnikar
Add power limits support for 28W SKU. BRANCH=None BUG=b:289854108 TEST=Build FW Change-Id: I83deb1e574990cb70f9aac5d5eb46fbb710a6170 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76238 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29soc/intel/meteorlake: remove unused tcss mailbox codeKane Chen
In mtl, there is no MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE So, this patch removes unused code related to MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE ADL also removes this code, see cl:62861 BUG=b:288976547 TEST=Tested on Screebo and DP/USB are working as expected after suspend/resume Change-Id: I5a4b26c38ec3f5fe1d81fd70f8c2196d0e5b84c3 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76126 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29soc/intel/meteorlake: Add QS(C0) stepping CPU IDMusse Abdullahi
This patch adds CPU ID for C0 stepping (aka QS). DOC=#723567 TEST=Able to boot on C0 rvp (and rex) and get correct CPU Name in coreboot log. Change-Id: I53e3b197f2a0090e178877c1eef783b41670ca83 Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76135 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26soc/intel/meteorlake: Add support for crashlogPratikkumar Prajapati
Capture crashlog records from CPU PUNIT SRAM, SOC PMC SRAM and, IOE SRAM. Crashlog records for IOE SRAM is discovered by parsing SOC PMC SRAM records. BUG=b:262501347 TEST=Able to trigger Crashlog, BERT table gets generated and decodes as expected. Change-Id: Ib0abd697fba35edf1c03d2a3a325b7785b985cd5 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-23commonlib/console/post_code.h: Change post code prefix to POSTCODElilacious
The prefix POSTCODE makes it clear that the macro is a post code. Hence, replace related macros starting with POST to POSTCODE and also replace every instance the macros are invoked with the new name. The files was changed by running the following bash script from the top level directory. sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \ src/commonlib/include/commonlib/console/post_codes.h; myArray=`grep -e "^#define POSTCODE_" \ src/commonlib/include/commonlib/console/post_codes.h | \ grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`; for str in ${myArray[@]}; do splitstr=`echo $str | cut -d '_' -f2-` grep -r POST_$splitstr src | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; grep -r "POST_$splitstr" util/cbfstool | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; done Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-23soc/intel/meteorlake: Rename shared SRAM aliasesPratikkumar Prajapati
Rename shared SRAM aliases for IOE and PMC to make them more readable. pci device 13.3 is IOE shared sram, renamed to ioe_shared_sram. pci device 14.2 is PMC shared sram, renamed to pmc_shared_sram. Rename them in SOC code as well as mainboard to make sure the patch builds for the relevant boards. BUG=b:262501347 TEST=Able to build. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I02a8cacc075f396549703d7a008382e76258f865 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75999 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-21meteorlake: Rename `SOC_INTEL_METEORLAKE_U_P` as per latest EDSSubrata Banik
This patch renames config `SOC_INTEL_METEORLAKE_U_P` to `SOC_INTEL_METEORLAKE_U_H` as per Intel Meteor Lake Processor EDS version 1.3.1 (doc number: 640228). With new branding, the MTL-U/H-Processor Line offered in a 1-chip platform that includes the Compute, SOC, GT, and IOE tile on the same package. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I032be650bbfef0bf0ef86bb37417b1d854303501 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75931 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-06-17soc/intel/meteorlake: Update tcss_usb3 aliasEric Lai
TCSS and TBT use the same lane on schematic. Update the port start from 0 to match the Intel schematic. You can better follow the it without convert the port number. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ic6631dcbbd9f6c79c756b015425e2da778eb395e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-16soc/intel/meteorlake: select UDK_202302_BINDING KconfigRonak Kanabar
MTL FSP uses 202302 Edk2. select UDK_202302_BINDING Kconfig for MTL SoC. BUG=b:261689642 TEST= Build and boot to Google/rex. Change-Id: I9167e3b08a2a1fa2f4cc6ca11cb8308dc56fd940 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75728 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-16soc/intel/meteorlake: Disable ACPI PM timer using IOE.PMCSubrata Banik
This patch disables the ACPI PM timer which is necessary for XTAL OSC shutdown. Also, disabling ACPI PM timer switches off TCO. BUG=b:274744845 TEST=Able to boot and verify S0ix is working even with EC reset and cold boot scenarios. w/o this cl: > iotools mmio_read32 0xfe4018fc 0x0 w/ this cl: > iotools mmio_read32 0xfe4018fc 0x2 Change-Id: Ibb6e145f67dba7270e0a322ef414bf1cb09c5eda Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-15soc/intel: Add max memory speed into dimm infoEric Lai
Add MaximumMemoryClockSpeed if FSP have it, otherwise pass 0. TEST=check dmidecode dump the max speed. Handle 0x000C, DMI type 17, 40 bytes Memory Device Array Handle: 0x000A Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 16 GB Form Factor: SODIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR5 Type Detail: Unknown Synchronous Speed: 5600 MT/s Manufacturer: Micron Serial Number: 3f064d84 Asset Tag: Channel-0-DIMM-0-AssetTag Part Number: MTC8C1084S1SC56BG1 Rank: 1 Configured Memory Speed: 5200 MT/s Minimum Voltage: 1.1 V Maximum Voltage: 1.1 V Configured Voltage: 1.1 V Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I854474bce8d6ed02f47f6dce8585b3ddfae73f80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75810 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-06soc/intel/meteorlake: Fill PCI SSID parametersKapil Porwal
Set SSID UPD to program DID as SSID for all the on board PCIe devices if SSID is not being overridden by CONFIG option or device tree. BUG=b:263846223 TEST=Verify that SSID for all PCI devices is same as their respective DIDs. Output of lspci in the OS: 00:00.0 0600: 8086:7d02 (rev 01) Subsystem: 8086:7d02 00:02.0 0300: 8086:7d45 (prog-if 00 [VGA controller]) Subsystem: 8086:7d45 00:04.0 1180: 8086:7d03 (rev 01) Subsystem: 8086:7d03 00:05.0 0480: 8086:7d19 (rev 01) Subsystem: 8086:7d19 00:06.0 0604: 8086:7e4d (rev 01) (prog-if 00 [Normal decode]) Subsystem: 8086:7e4d Capabilities: [98] Subsystem: 8086:7e4d 00:07.0 0604: 8086:7ec4 (prog-if 00 [Normal decode]) Subsystem: 8086:7ec4 Capabilities: [90] Subsystem: 8086:7ec4 00:07.2 0604: 8086:7ec6 (prog-if 00 [Normal decode]) Subsystem: 8086:7ec6 Capabilities: [90] Subsystem: 8086:7ec6 00:0a.0 1180: 8086:7d0d (rev 01) Subsystem: 8086:7d0d 00:0d.0 0c03: 8086:7ec0 (prog-if 30 [XHCI]) Subsystem: 8086:7ec0 00:0d.2 0c03: 8086:7ec2 (prog-if 40) Subsystem: 8086:7ec2 00:0d.3 0c03: 8086:7ec3 (prog-if 40) Subsystem: 8086:7ec3 00:14.0 0c03: 8086:7e7d (rev 01) (prog-if 30 [XHCI]) Subsystem: 8086:7e7d 00:14.2 0500: 8086:7e7f (rev 01) Subsystem: 8086:7e7f 00:14.3 0280: 8086:7e40 (rev 01) Subsystem: 8086:0094 00:15.0 0c80: 8086:7e78 (rev 01) Subsystem: 8086:7e78 00:15.1 0c80: 8086:7e79 (rev 01) Subsystem: 8086:7e79 00:15.3 0c80: 8086:7e7b (rev 01) Subsystem: 8086:7e7b 00:16.0 0780: 8086:7e70 (rev 01) Subsystem: 8086:7e70 00:19.0 0c80: 8086:7e50 (rev 01) Subsystem: 8086:7e50 00:19.1 0c80: 8086:7e51 (rev 01) Subsystem: 8086:7e51 00:1c.0 0604: 8086:7e3e (rev 01) (prog-if 00 [Normal decode]) Subsystem: 8086:7e3e Capabilities: [98] Subsystem: 8086:7e3e 00:1e.0 0780: 8086:7e25 (rev 01) Subsystem: 8086:7e25 00:1e.3 0c80: 8086:7e30 (rev 01) Subsystem: 8086:7e30 00:1f.0 0601: 8086:7e04 (rev 01) Subsystem: 8086:7e04 00:1f.3 0401: 8086:7e28 (rev 01) 00:1f.5 0c80: 8086:7e23 (rev 01) Subsystem: 8086:7e23 Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I364c2052984b6f562bffe8f5ad7035c8b659d369 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-04soc/intel/meteorlake: Apply PCIe RP mask based on SoC typeSubrata Banik
This patch ensures to update the FSP-M UPDs related to PCIe RP mask properly as per the SoC type. For example: PCIe RPs belong to the SoC/IOE die for MTL-U/P whereelse PCIe RPs are from PCH die in case of MTL-S. BUG=b:276697173 TEST=Able to build and boot google/rex. Change-Id: Ice81553274682476bb4c927061b1196dc142836d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75608 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-04soc/intel/meteorlake: Introduce different SoC flavors of Meteor LakeSubrata Banik
This patch introduces the different SoC flavors of Intel Meteor Lake as: * MTL-U * MTL-P * MTL-S MTL-U and MTL-P are PCH less designs, while MTL-S is with PCH die. The task for mainboard is to specify the correct SoC type rather than selecting the MTL SoC by default. This change is necessary to support the different SoC flavors of Intel Meteor Lake. BUG=b:276697173 TEST=Able to build and boot google/rex. Change-Id: I27404bbbd0b489412953118e140f6f39b6e43426 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-04soc/intel/meteorlake: Hook up UPD PchHdaSdiEnableRonak Kanabar
Hook the PchHdaSdiEnable UPD so that mainboard can change the settings via devicetree. PchHdaSdiEnable UPD enable HDA SDI lanes. BUG=b:273962021 TEST=Verified the settings on google/rex using debug FSP logs. Change-Id: I43f1e59d28fc07218f8e25266f8ce3bdcf3f6e5c Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75529 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-05-26soc/intel/meteorlake: Hook up SaGvFreq, SaGvGear updsBora Guvendik
Hook the SaGvFreq, SaGvGear upds so that mainboard can change the settings via devicetree. Meteor Lake supports 4 SaGv work points and it can dynamically scale the work point based on memory bandwidth utilization. Dynamic gearing technology allows the Memory Controller to run at 1:1, 1:2 or 1:4 ratio of DRAM speed. The gear ratio is the ratio of DRAM speed to Memory Controller Clock. BUG=b:282164577 TEST=Verified the settings on google/rex using debug FSP logs. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I37169880af4019675374594e90735b5d7d0873b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75290 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-25soc/intel/mtl/acpi/xhci: Add clock gating supportJeremy Compostella
Implement PS0 and PS3 methods to support xHCI clock gating in S0ix suspend and resume. BUG=b:283989367 TEST=S0iX test passed Change-Id: Ia5b72b81fd1c0d0b7b90f8d9cbf6ef4aa9da9743 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-25soc/intel/meteorlake: Enable Key LockerPratikkumar Prajapati
BUG=b:276988831 Platform=Rex Test= inteltool -k ============= Dumping INTEL Key Locker status ============= Key Locker supported : YES AESKL instructions enabled : YES =========================================================== Also, No S0ix issue seen, no impact on power just with this coreboot patch, no stability issue seen. Boot time delta (using cbmem -t): Without this CL: 963:returning from FspMultiPhaseSiInit 1,299,043 (98,480) With this CL: 963:returning from FspMultiPhaseSiInit 1,324,659 (121,995) Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I9919f44623972d7bbae4a9b886e1da4ac7879c98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71120 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-25soc/intel/meteorlake: Set SaGv work points as enum macroSubrata Banik
This patch adds an enum macro to define the different SaGv work points. The enum macro is named `sagv_wp_bitmap` and it has three values: The goal is to choose the optimal SaGv work point for the target platform after considering the two inputs as power consumption and performance. The first group is for workloads that require high performance, even if it means consuming more power. The second group is for workloads that can tolerate lower performance, in order to save power. SAGV_POINTS_0_1: The highest power consumption, but also the highest performance. SAGV_POINTS_0_1_2: A lower power consumption than work point SAGV_POINTS_0_1, but also a lower performance. SAGV_POINTS_0_1_2_3: The lowest power consumption, but also the lowest performance. Set SaGv work points after reviewing the power and performance impact with SaGv set to 1 (Enabled) and various considering various work points between 0-3 being enabled. BUG=b:267879107 TEST=Able to build google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4af0038f2799a458d1b006270068341f65d36609 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75362 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-24soc/intel/meteorlake: Add CPU PortID for GPIO CommunityMarx Wang
Add CPU PortID for GPIO communities in order to calculate IOM Aux Bias data correctly. BUG=b:283044004 TEST=able to detect external display Signed-off-by: Marx Wang <marx.wang@intel.com> Change-Id: I79f27fb0b6bde0a4ce2466eaf707166a952fad81 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-05-21soc/intel/meteorlake: Add `.final` to check FSP reset pending requestSubrata Banik
This patch adds an API to check FSP reset pending requests. This information is useful to understand if FSP would like boot firmware to issue any reset to complete the silicon initialization. As per recent debug it has been found that, FSP is accumulating all platform resets and executing a single reset from FSP Notify Phase. As coreboot skipped calling into the FSP Notify APIs hence, it might have missed the scope to issue the platform reset. BUG=b:282266168 TEST=Able to build and boot google/rex and able to detect FSP reset pending request. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibf7c996f09affa099c9124773fe2d581f370d1a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-05-19soc/intel/meteorlake: Add igd deviceWon Chung
Add igd device name in soc_acpi_name(), and src/drivers/gfx/generic can generate device in GFX0 scope in SSDT. BUG=b:277629750 TEST=emerge-rex coreboot then check SSDT on DUT Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Id7a136b5234cf5c0f60ecf253ee78c123f1f573b Reviewed-on: https://review.coreboot.org/c/coreboot/+/75274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-05-17soc/intel/meteorlake: Handle FSP logo paramsSubrata Banik
This patch overrides FSP-S UPD `LogoPtr/LogoSize` with a valid logo.bmp file if `BMP_LOGO` config is enabled. TEST=Able to see splash screen while booting Intel Meteor Lake RVP with BMP_LOGO config enable. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iaba187456dd4dfb2f69d3532e83a3850f31783ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/75198 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-05-11soc/intel/meteorlake: Increase pcie snoop/non-snoop latencyRavi Sarawadi
This fixes an issue where pcie was not power gating and blocked S0ix entry. Overwrite pcie max non-snoop and snoop latency tolerance values to 15.73ms as stated in doc #729123 - MTL External Design Specification. BUG=none TEST=Boot google/rex, print/check values. Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.corp-partner.google.com> Change-Id: I9dfb9edbac95d28d50653777466ea172be64f612 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68308 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-05-08soc/intel/meteorlake: Apply large cbmem buffer size for FSP debugSubrata Banik
This patch ensures that the PRERAM_CBMEM_CONSOLE_SIZE and CONSOLE_CBMEM_BUFFER_SIZE hold a larger cbmem buffer size to contain the entire FSP debug serial log. The existing implementation was not appropriate, where the larger cbmem size was even applicable for serial AP firmware (w/o FSP debug) image as well. This change is necessary to ensure that the FSP debug serial log is always available, even in cases where the cbmem buffer size is limited. BUG=b:280481298 TEST=Able to build and boot google/rex with non-FSP serial AP image and with FSP serial AP image. Able to see the AP log completely inside the cbmem. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib35780fd558c8b6d9aa2e17241131ea4a58c2b9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/75030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-05-05src/soc/intel: Document meaning of variablesMaximilian Brune
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: Iaf88f34cedd09e2461bb05050392e178ec84d5d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-04-22soc/intel/meteoerlake: set power limits dynamicallySumeet R Pawnikar
Set power limit values dynamically based on Meteor Lake CPU TDP and PCI ID of SKU. BRANCH=None BUG=b:270664854 TEST=Built and verified power limit values for 15W SKU on Rex board Change-Id: I20c9bc21dfa79696b07c460dbcedb4fa51838bdb Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-22mb/google/rex: Enable asynchronous End-Of-PostSubrata Banik
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post right after PCI enumeration and handle the command response at `BS_PAYLOAD_BOOT'. With these settings we have observed a boot time reduction of about 100ms on google/rex. TEST=Tests on google/rex with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show End-Of-Post after PCI initialization and EOP message received at `BS_PAYLOAD_BOOT'. Change-Id: I27b540eeddcada521eba91fcc51504831d6dc855 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-21soc/intel/meteorlake: Don't offer D3Cold when it's disabledSean Rhodes
Use D3COLD_SUPPORT Kconfig option to adjust the maximum supported sleep state in ACPI. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ifa55a19727e6adb6864158c2c323d08a0c22b996 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-04-21soc/intel/meteorlake: Add VPU into the DMAR SATC tablezhaojohn
This change adds the VPU into the DMAR SATC table in order to support the VPU IO virtualization. BUG=None TEST=Enabled the VPU, booted to kernel and verified that DMAR SATC table includeded the VPU entry. Change-Id: I6d4af7c9844e33483a1e616eaee061a90d0be6fc Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-21soc/intel/(adl, cmn, mtl): Refactor cse_fw_sync() functionSubrata Banik
This patch refactors cse_fw_sync() function to include timestamp associated with the CSE sync operation.This effort will ensure the SoC code just makes a call into the cse_fw_sync() without bothering about adding timestamp entries. TEST=Able to build and boot google/marasov. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib5e8fc2b8c3b605103f7b1238df5a8405e363f83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-04-20soc/intel/meteorlake: Send CSE EOP Async CMD earlySubrata Banik
This patch sends the CSE EOP command asynchronous implementation early as part of `soc_init_pre_device`. Without this patch the duration between asynchronous CSE EOP send and receive commands is not ample which causes idle delay while waiting for EOP response. The goal of the CSE async implementation is to avoid idle delay while capturing the response from CSE EOP cmd. This patch helps to create ample duration between CSE EOP command being sent and response being captured. TEST=Able to boot google/rex sku to ChromeOS and observed ~100ms of boot time savings (across warm and cold reset scenarios) Change-Id: I91ed38edbd5a31d61d4888e1466169a3494d635a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-20soc/intel/meteorlake: Replace TcssD3ColdDisable with D3COLD_SUPPORTSean Rhodes
Remove the `TcssD3ColdDisable` option in devicetree, as it exists in Kconfig. The setting is currently unused. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I08930ef84438140a13df74900570b126088bd1cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/74478 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-20soc/intel/meteorlake: Drop FSP CPU feature programming for ChromeOSSubrata Banik
The Intel FSP used on ChromeOS platform has dropped the `CpuFeaturesPei.ffs` module to opt for coreboot running this additional feature programming on BSP and APs. TEST=Able to build and boot google/rex without any boot regression. Please refer to the boot time and SPI flash savings after dropping the FSP feature programming: Boot time savings=10ms SPI Flash size savings=34KB Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iaed0a009813098610190b2a3a985b0748c0d51de Reviewed-on: https://review.coreboot.org/c/coreboot/+/74168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-04-15soc/intel/meteorlake: Add B0 stepping CPU IDMusse Abdullahi
This patch adds CPU ID for B0 stepping (aka ES2). DOC=#723567 TEST=Able to boot on B0 rvp and get correct CPU Name in coreboot log. Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com> Change-Id: I8b939ccc8b05e3648c55f8f2a0a391cb08f04184 Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74300 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-14soc/intel/meteorlake: Replace assert with error messageKapil Porwal
Avoid asserts related to CNVi UPDs which are not boot critical. Instead, add error messages which are more helpful in identifying the issue. BUG=none TEST=Boot to the OS on google/rex Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I49a988b7eda009456d438ba7be0d2918826e1c36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74370 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-13soc/intel/meteorlake: Hook up UPD CnviWifiCoreKapil Porwal
Hook the newly created/exposed CnviWifiCore UPD up as a chip driver. Enable this option by default to maintain the existing behavior. BUG=b:270985197 TEST=Verified by enabling/disabling the UPD on google/rex Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I5b4662c2a064f7c9074797c8a2541dcf1dd686fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/74306 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-06soc/intel/meteorlake: Perform feature control lockSubrata Banik
This function calls into `set_feature_ctrl_lock()` to lock IA32_FEATURE_CONTROL MSRfeature control. TEST=Able to build and boot google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie9a03ee6786144dae6fd3a18bcc53cb62919dd42 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74162 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-06soc/intel/meteorlake: Enable VMX using coreboot CPU feature programSubrata Banik
This function calls into `set_feature_ctrl_vmx_arg()` to enable VMX for virtualization if not done by FSP (based on DROP_CPU_FEATURE_PROGRAM_IN_FSP config is enabled) in MeteorLake SoC based platform. TEST=Able to build and boot google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7e49c15fd4f78a3e633855fea550720f0a685062 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-06soc/intel/meteorlake: Set AES-NI LockSubrata Banik
This function performs locking of the AES-NI enablement state. TEST=Able to build and boot google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I16f1c14d8a0ca927a34c295cb95311bd4972d691 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-04-06soc/intel/meteorlake: Disable 3-strike errorSubrata Banik
This patch calls into API to disable 3-strike error on Meteor Lake SoC based platform. TEST=Able to build and boot google/rex to ChromeOS. Dumping MSR 0x1A4 shows BIT11 aka 3-strike error is disabled ``` localhost ~ # iotools rdmsr 0 0x1a4 0x0000000000000900 ``` Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I5c33a1fa2d7e27ec8ffdea876edbb86adc3b45b9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-06soc/intel/meteorlake: Allow to drop redundant CPU feature programmingSubrata Banik
This patch introduces a new config named `DROP_CPU_FEATURE_PROGRAM_IN_FSP` to avoid FSP running basic CPU feature programming on BSP and on APs using the "CpuFeaturesPei.efi" module. Most of this feature programming is getting performed today in scope of coreboot doing MP Init. Running this redundant programming in scope of FSP (when `USE_FSP_FEATURE_PROGRAM_ON_APS` config is enabled) results in CPU exception (for example: attempting to reprogram CPU feature lock MSR is causing CPU exception). SoC users should select this config after dropping "CpuFeaturesPei.ffs" module from FSP-S Firmware Volume (FV). Upon selection, coreboot runs those additional feature programming on BSP and APs. This feature is by default enabled, in case of "coreboot running MP init" aka `MP_SERVICES_PPI_V2_NOOP` config is selected. At present, this option does not do anything unless any platform eventually decides to drop FSP feature programming module and choose coreboot CPU feature programming over it. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I3be5329390401024d7ec9eed85a5afc35ab1b776 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-04soc/intel/meteorlake: Inject CSE TS into CBMEM timestamp tableBora Guvendik
Get boot performance timestamps from CSE and inject them into CBMEM timestamp table. 990:CSME ROM started execution 0 944:CSE sent 'Boot Stall Done' to PMC 47,000 945:CSE started to handle ICC configuration 225,000 (178,000) 946:CSE sent 'Host BIOS Prep Done' to PMC 225,000 (0) 947:CSE received 'CPU Reset Done Ack sent' from PMC 516,000 (291,000) 991:Die Management Unit (DMU) load completed 587,000 (71,000) 0:1st timestamp 597,427 (10,427) BUG=b:259366109 TEST=Able to see TS elapse prior to IA reset on Rex Change-Id: I548cdc057bf9aa0c0f0730d175eaee5eda3af571 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73713 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2023-04-02soc/intel/meteorlake: Set Power Performance Platform OverrideSubrata Banik
According to document 640858 MTL EDS Vol2, bit 18 (PWR_PERF_PLATFRM_OVR) of MSR_POWER_CTL must be set. This patch is backported from `commit 117770d32468e63df ("soc/intel/ alderlake: Enable Energy/Performance Bias control")`. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ic83225b619c49db0b49b521a83a2f1dc1ad69be8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74155 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 11:41:23 +0000