summaryrefslogtreecommitdiff
path: root/src/soc/intel/elkhartlake
AgeCommit message (Collapse)Author
2021-12-12soc/intel/elkhartlake: Hook up public microcodeArthur Heymans
Change-Id: I1d975713129d0a7bce823232d225ed17ee28a04d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-25soc/intel/elkhartlake: Update SA DIDs TableRick Lee
Update SA table as per latest EDS (Doc no: 601458). Add extra SKUs accordingly. Signed-off-by: Rick Lee <rick.lee@intel.com> Change-Id: Ia2bb9e54456dbea634c2b8e192f9fe813b9e6706 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Lean Sheng Tan Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
2021-11-24soc/intel/elkhartlake: Disable Intel PSE by defaultLean Sheng Tan
Disable PSE loading by default. If left enabled (current default), the EHL coreboot will end up in endless restart loop, due to FSP unable to locate PSE FW image and trigger global reset. However disabling this flag (PchPseEnable) will cause the coreboot to trigger a single reset due to CSE signal (HECI: CSE does not meet required prerequisites). The reason behind this is that FSP need to perform static disabling (power gate) to fully shut down PSE HW, and to do this will need to global reset entire system including CSE. Then PMC will power gate PSE from the start. To avoid this behavior, the best way to disable PSE is to disable via IFWI FIT softstrap (For specific detail can refer to Intel EHL coreboot MR2 release notes). With this, PMC will power gate PSE from the first cold boot and system will boot happily without single reset behavior. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Iccc0ab1c2e4ebb53013795933eb88262f70f456f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-22soc/intel/{adl,ehl,jsl,tgl}: Remove unused header `thermal.h`Subrata Banik
This patch removes unused header inclusion as <intelblocks/thermal.h> from several SoC finalize.c files. Change-Id: Ic9ac0ffb352686af22cc9d11b61f904238eef278 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-10Rename ECAM-specific MMCONF KconfigsShelley Chen
Currently, the MMCONF Kconfigs only support the Enhanced Configuration Access mechanism (ECAM) method for accessing the PCI config address space. Some platforms have a different way of mapping the PCI config space to memory. This patch renames the following configs to make it clear that these configs are ECAM-specific: - NO_MMCONF_SUPPORT --> NO_ECAM_MMCONF_SUPPORT - MMCONF_SUPPORT --> ECAM_MMCONF_SUPPORT - MMCONF_BASE_ADDRESS --> ECAM_MMCONF_BASE_ADDRESS - MMCONF_BUS_NUMBER --> ECAM_MMCONF_BUS_NUMBER - MMCONF_LENGTH --> ECAM_MMCONF_LENGTH Please refer to CB:57861 "Proposed coreboot Changes" for more details. BUG=b:181098581 BRANCH=None TEST=./util/abuild/abuild -p none -t GOOGLE_KOHAKU -x -a -c max Make sure Jenkins verifies that builds on other boards Change-Id: I1e196a1ed52d131a71f00cba1d93a23e54aca3e2 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-08soc/intel: drop Kconfig `PM_ACPI_TIMER_OPTIONAL`Michael Niewöhner
Technically, it's not depending on the hardware but on the software (OS/payload), if the PM Timer is optional. OSes with ACPI >= 5.0A support disabling of the PM Timer, when the respective FADT flag is unset. Thus, drop this guard. For platforms without hardware PM Timer (Apollo Lake, Gemini Lake) the Kconfig `USE_PM_ACPI_TIMER` depends on `!NO_PM_ACPI_TIMER`. As of this change, new platforms must either implement code for disabling the hardware PM timer or select `NO_PM_ACPI_TIMER` if no such is present. Change-Id: I973ad418ba43cbd80b023abf94d3548edc53a561 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22soc/intel/elkhartlake: Add PSE PCI devices into header fileLean Sheng Tan
Since PSE devices could be initialized as either host owned (PCI devices) or PSE owned (will be hidden from coreboot and only visible to PSE interface), add all PSE devices in PCI list header file for future usage. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Iaa40cdcb021d05e50504dd85f94e9c021e284d00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58466 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-22arch/x86/ioapic: Select IOAPIC with SMPKyösti Mälkki
For coreboot proper, I/O APIC programming is not really required, except for the APIC ID field. We generally do not guard the related set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC). In practice it's something one cannot leave unselected, but maintain the Kconfig for the time being. Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-19soc/intel: Constify `soc_get_cstate_map()`Angel Pons
Return a read-only pointer from the `soc_get_cstate_map()` function. Also, constify the actual data where applicable. Change-Id: I7d46f1e373971c789eaf1eb582e9aa2d3f661785 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-19soc/intel/*/acpi.c: Don't copy structs with `memcpy()`Angel Pons
A regular assignment works just as well and also allows type-checking. Change-Id: Id772771f000ba3bad5d4af05f5651c0f0ee43d6d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58390 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-17soc/intel: transition full control over PM Timer from FSP to corebootMichael Niewöhner
Set `EnableTcoTimer=1` in order to keep FSP from 1) enabling ACPI Timer emulation in uCode. 2) disabling the PM ACPI Timer. Both actions are now done in coreboot. `EnableTcoTimer=1` makes FSP skip these steps in any possible case including `SkipMpInit=0`, `SkipMpInit=1`, use of the MP PPI or FSP Multiphase Init. This way full control is left to coreboot. Change-Id: I8005daed732c031980ccc379375ff5b09df8dac1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao
2021-10-17soc/intel: implement ACPI timer disabling per SoC and drop common codeMichael Niewöhner
Since it's just a one-liner, implement disabling of the ACPI timer in soc code. This reduces complexity. Change-Id: I434ea87d00f6e919983d9229f79d4adb352fbf27 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel: move disabling of PM Timer to SoC PMC codeMichael Niewöhner
Move disabling of PM Timer to SoC PMC code. The original reason for placing that in `finalize` [1] was FSP hanging due to use of the PM timer without enabling timer emulation first in coreboot, which was added later [2]. [1] commit 6c1bf27dae (intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdown) [2] commit f004f66ca7 (soc/intel/skylake: Enable ACPI PM timer emulation on all CPUs) Change-Id: I354c3aea0c8c1f8ff3d698e0636932b7b76125f7 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-17soc/intel: deduplicate acpi_fill_soc_wakeMichael Niewöhner
The PM1_EN bits WAK_STS, RTC_EN, PWRBTN_EN don't need any SoC-specific handling. Deduplicate `acpi_fill_soc_wake` by setting these bits in common code. Change-Id: I06628aeb5b82b30142a383b87c82a1e22a073ef5 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-13soc/intel: drop P_BLK supportMichael Niewöhner
P_BLK is legacy and superseded by ACPI _CST. Also, the implementation for most platforms in soc/intel is broken. Thus, drop it. For APL the IO redirection is kept since it's used as replacement for the broken MWAIT instructions. Change-Id: I489aa7886dd9a4c1e6c12542bc2a1feba245ec36 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-12soc/intel: replace dt option PmTimerDisabled by KconfigMichael Niewöhner
Replace the dt option `PmTimerDisabled` with use of the Kconfig option `USE_PM_ACPI_TIMER` for enabling/disabling the PM Timer. A default value representing the prior devicetree value was added to the boards system76/{lemp10,galp5,darp7}, so this change will not alter behaviour. Change-Id: If1811c6b98847b22272acfa35ca44f4fbca68947 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-12soc/intel/*/cpu.c: Add missing space in commentAngel Pons
Add a space before the `*/` C-style comment ending. Change-Id: Ic8928286c8237808b9e380e4393078792589615d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-29soc/intel: Drop unnecessary `select REG_SCRIPT`Angel Pons
These platforms no longer use reg-script. Drop unneeded select. Change-Id: I8fc4dc29d25dffbf9ed1947d0ff013b2fae0faaf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-29soc/intel/{cnl,jsl,tgl,ehl,adl}: rename PMC device init/enable callbacksMichael Niewöhner
The current names of the PMC init/enable callbacks are very confusing. Rename them. Change-Id: I69f54f3b4e1ea9a9b4fa5c8dd9c0d454d7cd1283 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-23soc/intel/{xeon-sp,icl,tgl,jsl,ehl}: add NMI_{EN,STS} registersMichael Niewöhner
Add NMI_EN and NMI_STS registers, so NMI interrupts can be used. References: - XEON-SP: Intel doc# 633935-005 and 547817 rev1.5 - ICL-LP: Intel doc# 341081-002 - TGL-LP: Intel doc# 631120-001 - TGL-H: Intel doc# 636174-002 - JSL: Intel doc# 634545-001 - EHL: Intel doc# 636722-002 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I2621f4495dfd4f95f9774d9081e44c604de830a1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lance Zhao
2021-09-20soc/intel/elkhartlake: Clear RTC_BATTERY_DEADTim Wawrzynczak
Normally for vboot-enabled x86 board, the VBNV region is stored in CMOS and backed up to flash (RW_NVRAM). However, on the very first boot after a flash of the full SPI image (so RW_NVRAM is empty), if RTC_BATTERY_DEAD is set, coreboot persistently requests recovery before FSP-M finishes (which appears to be the current location that RTC_BATTERY_DEAD is cleared on this platform). This is because vbnv_cmos_failed() will still return 1. Therefore, immediately after reading RTC_BATTERY_DEAD, it is cleared. This prevents an infinite boot loop when trying to set the recovery mode bit. Note that this was the behavior for previous generations of Intel PMC programming as well (see southbridge/intel, soc/skylake, soc/broadwell, etc). BUG=b:181678769 Change-Id: I95753fa536fae8ca4bb95007419875815c1bcb06 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-09-17soc/intel/{ehl,jsl}: make use of Kconfig options for PRMRR sizeMichael Niewöhner
Migrate the last two platforms to using Kconfig through `get_valid_prmrr_size()` instead of hardcoded values in the devicetree. Change-Id: I93aa177f741ca8b2a2d50fae2515606b96784e83 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-10soc/intel/elkhartlake: Switch to runtime generation of Power EngineTim Wawrzynczak
The pep.asl file is being obsoleted by runtime generation, therefore switch elkhartlake boards to this method. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I47f03b440729d4b37ae0abc84bd1d18c4e01657d Reviewed-on: https://review.coreboot.org/c/coreboot/+/56012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-08cpu/x86/tsc: Deduplicate Makefile logicAngel Pons
The code under `cpu/x86/tsc` is only compiled in when its `Makefile.inc` is included from platform (CPU/SoC) code and the `UDELAY_TSC` Kconfig option is enabled. Include `cpu/x86/tsc/Makefile.inc` once from `cpu/x86/Makefile.inc` and drop the now-redundant inclusions from platform code. Also, deduplicate the `UDELAY_TSC` guards. Change-Id: I41e96026f37f19de954fd5985b92a08cb97876c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57456 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-05soc/intel/elkhartlake: Lock PAM registers in finalizeTim Wawrzynczak
Use the support from the previous patch to have coreboot lock the PAM registers instead of the FSP when the lockdown configuration is set to coreboot. Change-Id: Ib6fce70d6b0386906850884880dadbf45597452d Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-08-19acpi: Fill fadt->century based on KconfigNico Huber
Change-Id: I916f19e022633b316fbc0c6bf38bbd58228412be Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-08-04Move post_codes.h to commonlib/console/Ricardo Quesada
Move post_codes.h from include/console to commonlib/include/commonlib/console. This is because post_codes.h is needed by code from util/ (util/ code in different commit). Also, it sorts the #include statements in the files that were modified. BUG=b:172210863 Signed-off-by: Ricardo Quesada <ricardoq@google.com> Change-Id: Ie48c4b1d01474237d007c47832613cf1d4a86ae1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56403 Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-03soc/intel/*: Allow configuring 8254 timer via CMOSSean Rhodes
Currently, the `USE_LEGACY_8254_TIMER` Kconfig option is the only way to enable or disable the legacy 8254 timer. Add the `legacy_8254_timer` CMOS option to allow enabling and disabling the 8254 timer without having to rebuild and reflash coreboot. If options are not enabled or the option is missing in cmos.layout, the Kconfig setting is used. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ic82c7f25cdf6587de5c40f59441579cfc92ff2f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-07-29soc/intel/elkhartlake: Update UART clock divider paramsLean Sheng Tan
As EHL UART source clock is 120MHz, update the clock divider parameters (M & N) to reflect the right value. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I30c21bc4d1ef901a318a12664b61be75c1acf23b Reviewed-on: https://review.coreboot.org/c/coreboot/+/56422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-19soc/intel/common: Rename kconfig PMC_EPOCLean Sheng Tan
Rename PMC_EPOC to SOC_INTEL_COMMON_BLOCK_PMC_EPOC to maintain common naming convention. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If8a264007bbb85a44bbdfa72115eb687c32ec36e Reviewed-on: https://review.coreboot.org/c/coreboot/+/55982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-17soc/intel/elkhartlake: Expose FIVR config to mainboardLean Sheng Tan
Elkhart Lake provides option to configure FIVR (Fully Integrated Voltage Regulators) via parameters in FSP-S. This CL removes fixed FIVR config values and expose these parameters to the devicetree so that they can be configured on mainboard level as needed. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ie1b0e0cc908ba69805dec7682100dfccb3b9d8b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-07-17soc/intel/elkhartlake: Make use of `cpu/intel/cpu_ids.h'Subrata Banik
Remove inclusion of mp_init.h for getting CPUIDs and use dedicated cpu_ids.h file in SoC directory. Change-Id: Ieb8063116bee59f6f6bf1f6b0b2349ce22bd67bd Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
2021-07-02src: Introduce `ARCH_ALL_STAGES_X86`Angel Pons
Introduce the `ARCH_ALL_STAGES_X86` Kconfig symbol to automatically select the per-stage arch options. Subsequent commits will leverage this to allow choosing between 32-bit and 64-bit coreboot where all stages are x86. AMD Picasso and AMD Cezanne are the only exceptions to this rule: they disable `ARCH_ALL_STAGES_X86` and explicitly set the per-stage arch options accordingly. Change-Id: Ia2ddbae8c0dfb5301352d725032f6ebd370428c9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-07-01soc/intel: Refactor `xdci_can_enable()` functionAngel Pons
The same pattern appears on all `xdci_can_enable()` call sites. Move the logic inside the function and take the xDCI devfn as parameter. Change-Id: I94c24c10c7fc7c5b4938cffca17bdfb853c7bd59 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-30soc/intel/elkhartlake: Enable PCH GBELean Sheng Tan
Enable PCH GBE with following changes: 1. Configure PCH GBE related FSP UPD flags 2. Use EHL own GBE ACPI instead of common code version due to different B:D.F from the usual GBE 3. Add kconfig PMC_EPOC to use the PMC XTAL read function Due to EHL GBE comes with time sensitive networking (TSN) capability integrated, EHL FSP is using 'PchTsn' instead of the usual 'PchLan' naming convention across the board. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I6b0108e892064e804693a34e360034ae7dbee68f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-30src: Move `select ARCH_X86` to platformsAngel Pons
To generalise the choice of 32-bit or 64-bit coreboot on x86 hardware, have platforms select `ARCH_X86` directly instead of through per-stage Kconfig options, effectively reversing the dependency order. Change-Id: If15436817ba664398055e9efc6c7c656de3bf3e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-06-28soc/intel: Drop casts around `soc_read_pmc_base()`Angel Pons
The `soc_read_pmc_base()` function returns an `uintptr_t`, which is then casted to a pointer type for use with `read32()` and/or `write32()`. But since commit b324df6a540d154cc9267c0398654f9142aae052 (arch/x86: Provide readXp/writeXp helpers in arch/mmio.h), the `read32p()` and `write32p()` functions live in `arch/mmio.h`. These functions use the `uintptr_t type for the address parameter instead of a pointer type, and using them with the `soc_read_pmc_base()` function allows dropping the casts to pointer. Change-Id: Iaf16e6f23d139e6f79360d9a29576406b7b15b07 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-06-23soc/intel/elkhartlake: Use is_devfn_enabled() for Device4Enable UPDSubrata Banik
1. Replace pcidev_path_on_root() and is_dev_enabled() functions combination with is_devfn_enabled() while enabling Thermal config. 2. Remove unused local variable of device structure type (struct device *). Change-Id: Icc2a44d6d3f1a78bf47354049dd9e2a0ed2282ba Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-23soc/intel/elkhartlake: Use devfn_disable() function for XDCISubrata Banik
Use devfn_disable() for disabling a PCI device rather than using `dev->enabled = 0`. Also, use is_devfn_enabled() to get the device current state prior updating the FSP-S UPD for XDCI. TEST=FSP-S disabled XDCI when `xdci_can_enable` returns 0 and XDCI is disabled at PCI enumeration `PCI: 00:14.1: enabled 0`. Change-Id: I8ca0813e18da0f95eb9293b6d0bbdf933a1e7039 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55725 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-21soc/intel/elkhartlake: Expose In-Band ECC config to mainboardWerner Zeh
Elkhart Lake provides a feature called "In-Band ECC" which uses a piece of system DRAM to store the ECC information in. There are a few parameters in FSP-M to set this feature up as needed. This patch adds code to expose these parameters to the devicetree so that they can be configured on mainboard level as needed. Change-Id: I7a4953d7b35277de01daff04211450e3d1bd8103 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55668 Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-18soc/intel/elkhartlake: Make use of FSP_ARRAY_LOAD macroLean Sheng Tan
Use FSP_ARRAY_LOAD macro for checking and loading array type configs into array type UPDs to increase readability. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I2562977e55f8909038697f7e19b82ec6b5e47fae Reviewed-on: https://review.coreboot.org/c/coreboot/+/55553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-16soc/intel/elkhartlake: Make use of is_devfn_enabled()Subrata Banik
1. Replace all pcidev_path_on_root() and is_dev_enabled() functions combination with is_devfn_enabled(). 2. Remove unused local variable of device structure type (struct device *). 3. Replace pcidev_path_on_root() and dev->enabled check with is_devfn_enabled() call. TEST=Able to build and boot without any regression seen on EHL. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: Iadf9145a11f27ff0e182f146b6fe5a01e6cf3ed8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-06-11soc/intel/elkhartlake: Update FSP-S FuSa related settingsLean Sheng Tan
Further add initial Silicon UPD settings for FuSa (Functional Safety). Disable all by default, due to FSP binary enable all by default. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I88264ba3e3f9f54ad949c55b230082d1fa289fa4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55342 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-11soc/intel/elkhartlake: Update FSP-S PM & Thermal related configsLean Sheng Tan
Further add initial Silicon UPD settings for thermal and power management stuffs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I04ded059c36f18925b7a74c934fef2566c3db8fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/55335 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-06-10soc/intel/elkhartlake: Fix gpio_soc_defs.h variable typoLean Sheng Tan
Fix GPIO_COM2_END from GPIO_RSVD_2 to GPIO_RSVD_12. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I670f4bec8f141da73428010371754746a455df25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55334 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-10soc/intel/elkhartlake: Use FSP from FSP repo by defaultLean Sheng Tan
Select 'HAVE_INTEL_FSP_REPO' so that the FSP binary from the FSP repository is used by default. Also, use the FSP headers from the FSP repository instead. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I0c1bcb07ed0f73e1d5ada5f6f16b84816c4ef3d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55229 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-07cpu/x86: Default to PARALLEL_MP selectedKyösti Mälkki
Change-Id: I9833c4f6c43b3e67f95bd465c42d7a5036dff914 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-06-07soc/intel: Drop unused lpss functionsFurquan Shaikh
This change drops the following unused lpss functions and related code: * soc_lpss_controllers_list * is_dev_lpss These functions were added to determine if a controller is LPSS for performing IRQ configuration. But, these never got used and hence are being dropped. Change-Id: I27bdfbca7c199e823a0e4fdb277e3f22fb6bae7a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55226 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-06-04soc/intel/elkhartlake: Update FSP-S storage related configsLean Sheng Tan
Further add initial Silicon UPD storage settings: - SATA - SD card - eMMC Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Id4145fcf156756a610b8a9a705d4ab99fe7b0bf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-06-04soc/intel/elkhartlake: Update FSP-S UPD RP & USB related configsLean Sheng Tan
Further add initial Silicon UPD settings for: - PCIe root ports - USB Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I60afb78a7997b8465dd6318f3abee28f95a65100 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55034 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-04soc/intel/elkhartlake: Update FSP-S UPD configs for graphic & chipsetLean Sheng Tan
Further add initial silicon UPD settings for: - graphics & display - chipset lockdown - PAVP - legacy timer - PCH master gating control - HECI This CL also enables HECI 1 in devicetree.cb. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I657f44f8506640c23049614b2db9d1837e6d44ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/54960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-06-01soc/intel/elkhartlake: Update FSP-S UPD LPSS related configsTan, Lean Sheng
Add Silicon upd settings for LPSS (GSPI/UART/I2C). Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ib0c3cd1d37ff9892d09d6d86ac50e230549c7e53 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-05-30soc/intel/elkhartlake: Update FADT tableTan, Lean Sheng
Update FADT table per relevant PM settings: Fix PM Timer block access size and disable C2 and C3 states for the CPU. Further on, set the century byte offset in FADT to point to the common location in CMOS. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I72a57bf8ec61c3eabc4522c2695ae4b16979f188 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54958 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-30soc/intel/elkhartlake: Update FSP-M UPD related configsTan, Lean Sheng
Upload the FSP-M UPD configs. This CL also updated the chip.h and devicetree.cb with the relevant variables and configs. This CL also updated the GPIO related settings (PMC & SD card) in devicetree.cb. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If6321064b37535b390cf3dd7c41a719c598a0cd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-05-26soc/intel/elkhartlake: Minor fix for SCS & XHCI devices in ACPITan, Lean Sheng
1. Remove the extra UAB devices in xhci.asl 2. Update SD controller ADR in scs.asl 3. Remove the unused SCS PID Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I1906fb4e6893dc5e2b0bc8d85f4a7b2efc85c3a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54867 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-26soc/intel/elkhartlake: Update SA & IGD DIDs TableTan, Lean Sheng
Update SA & IGD DIDs table as per latest EDS (Doc no: 601458). Add extra SKUs and fix the mismatched SKU numbers accordingly. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I62fd9e6a7cf0fc6f541f3d6d9edd31d41db7279f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-05-18cpu/x86: Only include smm code if CONFIG_HAVE_SMI_HANDLER=yArthur Heymans
This removes the need to include this code separately on each platform. Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-13src: Match array format in function declarations and definitionsPatrick Georgi
gcc 11.1 complains when we're passing a type* into a function that was declared to get a type[], even if the ABI has identical parameter passing for both. To prepare for newer compilers, adapt to this added constraint. Change-Id: I5a1b3824a85a178431177620c4c0d5fddc993b4f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-04-26soc/intel/elkhartlake: Remove elog.cTan, Lean Sheng
Remove elog.c from EHL soc as EHL does not support chromebook and hence does not need it. Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com> Change-Id: If66adfe15d00feb0a7fb5e1ced92006a4adebdb7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50173 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-26soc/intel/elkhartlake: Update GPIO communitiesTan, Lean Sheng
GPIOs are divided into different communities. Each community consists of one or more GPIO groups. We need to configure the groups in coreboot so that they are mapped properly. GPIO communities should be properly configured in GPIO_CFG and MISCCFG registers. GPP_* defines in gpio_soc_defs.h are configured in GPIO_CFG register while the PMC_GPP_* in pmc.h. GPIO communities in coreboot should match with the kernel gpio communities also. Kernel reads the ASL file from coreboot. This patch adds the proper community mapping in ASL code to match with kernel code. In gpio_soc_defs.c file we are indexing the groups correctly. In gpio.h file we define all the gpio devices as kernel populates sysfs with separate gpio device for each community. This patch is created based on Intel EHL PCH Datasheet with Document number 614109 and Chapter 21. Also update GPIO COM3 Port ID and 2 GPIO register values (HOSTSW_OWN_REG_0 & PAD_CFG_BASE) respectively. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ifc609b3d6ab9ea2b807dc0f178ec99f95d2db4cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/48555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-04-21soc/intel: Replace open-coded buffer length calculationAngel Pons
Use `sizeof(value)` instead of manually calculating the buffer size. Change-Id: Ibe49e40b1c4f2c0b661d94e59059a95bdb204197 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-21soc/intel: Fix typo in commentAngel Pons
rotine ---> routine Change-Id: I21a71f52d2ec7a05ea3dadf30e8f3e8dac07d168 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-04-21soc/intel/alderlake: rename CONFIG_MAX_PCIE_CLOCKS to CONFIG_MAX_PCIE_CLOCK_SRCRizwan Qureshi
CONFIG_MAX_PCIE_CLOCKS renamed to MAX_PCIE_CLOCK_SRC to make it clear that this config is for the number of PCIe Clock sources available which is different from PCIe clock reqs. This is more relevant in alderlake, as the number clock source and clock reqs differ. However since this is a better name, renaming it throughout the soc/intel tree. Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Change-Id: I747c94331b68c4ec0b6b5a04149856a4bb384829 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52194 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-21soc/intel: Move pmc_soc_set_afterg3_en() to pmutil.cAngel Pons
Commit 2c26108208e4aa48de21be576ab6cad9286d7934 moved this function to pmutil.c for Tiger Lake. Do this to all other platforms for consistency. For Skylake, __SIMPLE_DEVICE__ preprocessor guards are no longer needed. With this change, pmc.c is only needed in ramstage. Adjust Makefile.inc accordingly, and drop ENV_RAMSTAGE guards from Skylake. Change-Id: I424eb359c898f155659d085b888410b6bb58b9ed Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52464 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2021-03-27soc/intel: Rename and move MISCCFG_GPIO_PM_CONFIG_BITS definition to soc/gpio.hSubrata Banik
Lists of changes: 1. Rename MISCCFG_ENABLE_GPIO_PM_CONFIG -> MISCCFG_GPIO_PM_CONFIG_BITS 2. Move MISCCFG_GPIO_PM_CONFIG_BITS definition from intelblock/gpio.h to soc/gpio.h. Refer to detailed description below to understand the motivation behind this change. An advanced GPIO PM capabilities has been introduced since CNP PCH, refer to 'include/intelblock/gpio.h' for detailed GPIO PM bit definitions. Now with TGP PCH, additional bits are defined in the MISCCFG register for GPIO PM control. This results in different SoCs supporting different number of bits. The bits defined in earlier platforms (CNL, CML, ICL) are present on TGL, JSL and ADL too. Hence, refactor the common GPIO code to keep the bit definitions in intelblock/gpio.h, but the definition of MISCCFG_GPIO_PM_CONFIG_BITS is moved to soc/gpio.h so that each SoC can provide this as per hardware support. TEST=On ADL, TGL and JSL platform. Without this CL : GPIO COMM 0 MISCCFG:0xC0 (Bit 6 and 7 enable) With this CL : GPIO COMM 0 MISCCFG: 0x00 (Bit 6 and 7 disable) Change-Id: Ie027cbd7b99b39752941384339a34f8995c10c94 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-03-20soc/intel: Drop unused `GPIO_NUM_GROUPS` macroAngel Pons
This macro is unused and its value is often wrong. Drop it. Change-Id: Id3cfaa4d2eef49eddc02833efbe14e0c5c816263 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51662 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-17spd_bin: Replace get_spd_cbfs_rdev() with spd_cbfs_map()Julius Werner
In pursuit of the goal of eliminating the proliferation of raw region devices to represent CBFS files outside of the CBFS core code, this patch removes the get_spd_cbfs_rdev() API and instead replaces it with spd_cbfs_map() which will find and map the SPD file in one go and return a pointer to the relevant section. (This makes it impossible to unmap the mapping again, which all but one of the users didn't bother to do anyway since the API is only used on platforms with memory-mapped flash. Presumably this will stay that way in the future so this is not something worth worrying about.) Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Iec7571bec809f2f0712e7a97b4c853b8b40702d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2021-03-12soc/intel/*: drop UART pad configuration from common codeMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Since all boards do pad setup on their own now, finally drop the pad configuration from SoC common code. Change-Id: Id03719eb8bd0414083148471ed05dea62a895126 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao
2021-03-03soc/intel: Factor out common smmrelocate.cAngel Pons
There are seven identical copies of the same file. One is enough. Change-Id: I68c023029ec45ecfaab0e756fce774674bb02871 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50937 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-03soc/intel: Retype `CnviBtAudioOffload` devicetree optionAngel Pons
The `FORCE_ENABLE` and `FORCE_DISABLE` names do not match what FSP UPDs say, and can be confused with the `PchHdaTestPowerClockGating` UPD. Replace the enum with a bool, and drop the confusing names. Note that the enum for Ice Lake was incorrect, but no mainboards used the option. Change-Id: I2c9b4c6a2f210ffca946ca196299fa672a06ccc7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51154 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-03soc/intel: Backport SMRR locking supportAngel Pons
Backport commit 0cded1f116 (soc/intel/tigerlake: Add SMRR Locking support) to other client platforms. The SMRR MSRs are core-scoped on Skylake and Ice Lake, at least. Older platforms do not support SMRR locking, but now there's seven copies of the same file in the tree. A follow-up will deduplicate smmrelocate.c files into common CPU code. I cannot test Jasper Lake nor Elkhart Lake, but they should still work. As per documentation I do not have access to, Elkhart Lake seems to support SMRR locking. However, Jasper Lake documentation is unclear. Tested on Purism Librem Mini v1 (WHL-U i7-8565U), still boots and SMRR MSRs have the same value on all cores/threads (i7-8565U supports HT). Change-Id: Icbee0985b04418e83cbf41b81f00934f5a663e30 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-03-01soc/intel: Drop `bootblock_cpu_init()` functionAngel Pons
Just call `fast_spi_cache_bios_region()` directly instead. Change-Id: I99f6ed4cf1a5c49b078cfd05e357c2d4c26ade45 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50952 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01soc/intel: Drop `romstage_pch_init()` functionAngel Pons
It only calls `smbus_common_init()`, so just call that directly. Change-Id: I0237f52bb9b0503e83f5dbf31c4064bd0f5bae28 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50947 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01soc/intel: Factor out common smbus.hAngel Pons
Change-Id: I31bb406bd2cf371ee935aa31777307043b2ee61a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50942 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01soc/intel: Factor out common gpe.hAngel Pons
The definitions are identical across seven platforms. Unify them. Change-Id: I32bbd0777f8ca9d0362d210b43e0ba8dd0c8d79b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50940 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01soc/intel: Factor out identical acpigen GPIO helpersAngel Pons
Change-Id: I27f198d403f6ba05ba72ae0652da224d4cbf323a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50938 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01soc/intel: Include gfx.asl from northbridgeAngel Pons
The iGPU is on the northbridge or system agent, not the southbridge. Change-Id: Ic63a7ad532fd1faa8e90d44bf7269040fa901757 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-24soc/intel/*/smmrelocate.c: Uniformize cosmeticsAngel Pons
Use the same log message everywhere for consistency. Change-Id: I9d2230bc92313269470839486f6644f16e837d7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50934 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-24soc/intel/*/pmutil.c: Align cosmetics across platformsAngel Pons
Change-Id: I78d1b15deac2b80cc319dcfc5ab6bf419e2d61db Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50931 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-24soc/intel/{adl,jsl,ehl,tgl}: Remove ITSS polarity restoreAamir Bohra
Post boot SAI PCR access to ITSS polarity regsiter is locked. Restore of ITSS polarity does not take effect anyways. Hence removing the related programming. Change-Id: I1adab45ee903b9d9c1d98a060143445c0cee0968 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-16soc/intel/elkhartlake: Remove unused <string.h>Elyes HAOUAS
Found using: diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strstr\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/)|grep '<' Change-Id: I66a288df5c10c3ee5b9df599edc02aaed9a334e2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-02-16vc/google/chromeos: Always use CHROMEOS_RAMOOPS_DYNAMICKyösti Mälkki
Always allocate RAMOOPS from CBMEM and drop the related static variable CHROMEOS_RAMOOPS_RAM_START. Change-Id: Icfcf2991cb78cc6e9becba14cac77a04d8ada56a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50608 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-16ACPI: Add acpi_reset_gnvs_for_wake()Kyösti Mälkki
With chipset_power_state filled in romstage CBMEM hooks and GNVS allocated early in ramstage, GNVS wake source is now also filled for normal boot path. Change-Id: I2d44770392d14d2d6e22cc98df9d1751c8717ff3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-02-16soc/intel: Drop aliases on MMCONF_BASE_ADDRESSKyösti Mälkki
Change-Id: I5ba60c1d8c314d37b4ef71c4613e6e0629da8149 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-15soc/intel: Remove unused <console/console.h>Elyes HAOUAS
Change-Id: I630b7b0b1d564bcd99358caaaef4afd78c22866c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50528 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-11src: Remove unused <arch/cpu.h>Elyes HAOUAS
Change-Id: I1112aa4635a3cf3ac1c0a0834317983b4e18135a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-09soc/amd,intel: Drop s3_resume parameter on FSP-S functionsKyösti Mälkki
ACPI S3 is a global state and it is no longer needed to pass it as a parameter. Change-Id: Id0639a47ea65c210b9a79e6ca89cee819e7769b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-08soc/intel: Drop CID1 from GNVSKyösti Mälkki
The only reference to CID1 is in common/acpi/wifi.asl and only two braswell boards include it. Everywhere else the value in GNVS was unused. Change-Id: I09ea756fb3743e33d1e221f0a0df3a6fdc3fc3ba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-02-06drivers/intel/fsp2_0: Add support for MP services2 PPIAamir Bohra
Add support for MP services2 PPIs, which is slight modification over MP services 1 PPIs. A new API StartupAllCPUs have been added to allow running a task on BSP and all APs. Also the EFI_PEI_SERVICES parameter has been removed from all MP PPI APIs. This implementation also selects the respective MP services PPI version supported for SoCs BUG=b:169196864 Change-Id: Id74baf17fb90147d229c78be90268fdc3ec1badc Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-02-06intel: Rename config FSP_USES_MP_SERVICES_PPI to MP_SERVICES_PPIFurquan Shaikh
This change renames config FSP_USES_MP_SERVICES_PPI to MP_SERVICES_PPI in preparation to allow V1 and V2 versions of MP services PPI. TEST=Verified that timeless build for brya, volteer, icelake_rvp, elkhartlake_crb and waddledee shows no change in generated coreboot.rom Change-Id: I04acf1bc3a3739b31d6e9d01b6aa97542378754f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50275 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-06intel: Drop FSP_PEIM_TO_PEIM_INTERFACEFurquan Shaikh
This change drops the config FSP_PEIM_TO_PEIM_INTERFACE. FSP_PEIM_TO_PEIM_INTERFACE is used for: * Auto-selecting FSP_USES_MP_SERVICES_PPI * Including src/drivers/intel/fsp2_0/ppi/Kconfig * Adding ppi to subdirs-y * Setting USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI to y and is selected by SoCs that want to enable MP PPI services. Instead of using the indirect path of selecting MP PPI services, this change allows SoC to select FSP_USES_MP_SERVICES_PPI directly. The above uses are handled as follows: * Auto-selecting FSP_USES_MP_SERVICES_PPI --> This is handled by SoC selection of FSP_USES_MP_SERVICES_PPI. * Including src/drivers/intel/fsp2_0/ppi/Kconfig --> The guard isn't really required. The Kconfig options in this file don't present user prompts and don't really need to be guarded. * Adding ppi to subdirs-y --> Makefile under ppi/ already has conditional inclusion of files and does not require a top-level conditional. * Setting USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI to y --> This is set to y if FSP_USES_MP_SERVICES_PPI is selected by SoC. TEST=Verified that timeless build for brya, volteer, icelake_rvp, elkhartlake_crb and waddledee shows no change in generated coreboot.rom Change-Id: I0664f09d85f5be372d19925d47034c76aeeef2ae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50274 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-03src: Remove unused <cbmem.h>Elyes HAOUAS
Change-Id: I2279e2d7e6255a88953b2485c1f1a3b51a72c65e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-02-01src/soc/intel: Remove CPU_INTEL_COMMON_SMM selectionElyes HAOUAS
CPU_INTEL_COMMON_SMM is already selected in cpu/intel/common/Kconfig file. Also remove duplicated 'CPU_INTEL_COMMON'. Change-Id: I3328da567ac588e9bf6d57481fca117cc302a23a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50160 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-02-01soc/intel/elkhartlake: Config PlatformDebugConsentFrans Hendriks
UPD PlatformDebugConsent field is not configured. The config SOC_INTEL_ELKHARTLAKE_DEBUG_CONSENT is available but not used. Use this config value for PlatformDebugConsent. BUG= N/A TEST= Build Intel Elkhart Lake Change-Id: I697fb611dfb23e107fa8ef1543424b9797a7d027 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50108 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-31soc/intel/*: drop incomplete and unneeded check for DMI SRLOCKMichael Niewöhner
Before enabling IO decode ranges, current code checks if the DMI SRLOCK is set to prevent inconsistencies between LPC PCI cfg registers and LPC DMI registers, when the latter are locked. DMI SRLOCK only applies to PCHs with on-package DMI, but not to PCH-H, PCH-S and others with discrete PCH packages. So this check is at least incomplete. Further, the lock gets applied by FSP and gets reset on a warm reset. Thus, there is no case where the lock would be already set at the places where the DMI registers get written currently. Drop the checks for the reasons mentioned above. Change-Id: I59554ce96bce7f7d1a4ba9b098be9e8466c68eac Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49885 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 10:03:49 +0000