summaryrefslogtreecommitdiff
path: root/src/soc/intel/common
AgeCommit message (Collapse)Author
2019-08-14common/block/imc: Add Integrated Memory Controller (IMC) driverAndrey Petrov
IMC is found on certain Xeon processors. On such platforms SPDs are not connected to SMBus on PCH but to dedicated IMC-owned pins. The purpose of this driver is to expose access to the i2c/smbus controller associated with IMC. Datasheet used: Intel Xeon Processor D-1500 Product Family, Volume 2, reference 332051-001 This driver is largely based on i2c-imc.c Linux driver. https://lwn.net/Articles/685475/ TEST=single/double reads and single writes on Xeon-D1500. Hardware: Open Compute Project Monolake platform. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: Idbcda1c2273b9a5721fcd9470b4de182192779e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34678 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-13cpu/x86: Separate save_state struct headersKyösti Mälkki
Any platform should need just one of these. Change-Id: Ia0ff8eff152cbd3d82e8b372ec662d3737078d35 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34820 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-12soc/intel/common: Fix typo mistake in cache_as_ram.SSubrata Banik
Change-Id: I14c0e87012bdbaaff50844ed097b66e2221b1e08 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-08-09soc/intel/common: Set power-failure-state via option tableNico Huber
Allow get_option() to override the Kconfig choice. Change-Id: Ie91b502a38d1a40a3dea3711b017b7a5b7edd2db Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09soc/intel: Drop pmc_soc_restore_power_failure()Nico Huber
Get rid of this function and its dangerous, weak implementation. Instead, call pmc_set_power_failure_state() directly from the SMI handler. Change-Id: I0718afc5db66447c93289643f9097a4257b10934 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09soc/intel/apl: Implement power-failure-state APINico Huber
Needed some Makefile changes to be able to compile for SMM. Change-Id: Ibf218b90088a45349c54f4b881e895bb852e88bb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09soc/intel/common: Implement power-failure-state handlingNico Huber
This is a consolidation of the respective feature in `soc/intel/*lake/`, including additional support for MAINBOARD_POWER_STATE_PREVIOUS. For the latter, firmware has to keep track of the `previous` state. The feature was already advertised in Kconfig long ago, but not implemented. SoC code has to call pmc_set_power_failure_state() at least once during boot and needs to implement pmc_soc_set_afterg3_en() for the actual register write. Change-Id: Ic6970a79d9b95373c2855f4c92232d2aa05963bb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-09soc/intel/common/gspi: Use GSPI bus id to map to the controllerKarthikeyan Ramasubramanian
Currently SPI bus id is used to map to the controller in order to set the controller state. In certain platforms SPI bus id might not be exactly the same as GSPI bus id. For example, in Intel platforms SPI bus id 0 maps to fast spi i.e. SPI going to the flash and SPI bus id 1 .. n map to GSPI bus id 0 .. n-1. Hence using SPI bus id leads to mapping to the GSPI controller that is not enabled. Use the GSPI id bus so that the right controller is set to active state. This fixes the regression introduced by CB:34449 BUG=b:135941367 TEST=Boot to ChromeOS. Change-Id: I792ab1fa6529f5317218896ad05321f8f17cedcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-08-08arch/x86: Move TSEG_STAGE_CACHE implementationKyösti Mälkki
This is declared weak so that platforms that do not have smm_subregion() can provide their own implementation. Change-Id: Ide815b45cbc21a295b8e58434644e82920e84e31 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-08-07intel/apollolake: Replace smm_region_info() with smm_region()Kyösti Mälkki
Implementation remains the same. Change-Id: I8483bb8e5bba66b4854597f58ddcfe59aac17ae0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-07cpu/x86/smm: Promote smm_subregion()Kyösti Mälkki
No need to limit these declarations to FSP. Both PARALLEL_MP_INIT smm_relocate() and TSEG_STAGE_CACHE can be built on top of this. Change-Id: I7b0b9b8c8bee03aabe251c50c47dc42f6596e169 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-05soc/intel/common/lpss: Add function to check for a LPSS controllerAamir Bohra
Add an API to check if device is a LPSS controller. This API can be used for IRQ assignments for LPSS PCI controllers, since the LPSS controllers have a requirement of unique IRQ assignments and do not share same IRQ# with other LPSS controllers. SOC code is reponsible to provide list of the LPSS controllers supported and needs to implement soc_lpss_controllers_list API, in case it needs to use this common implementation. Change-Id: I3f5bb268fc581280bb1b87b6b175a0299a24a44a Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34137 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-04soc/intel/common/block/uart: Update the UART PCI device referenceAamir Bohra
This implementation revises the UART PCI device reference in common UART driver. The SOC functions have been aligned to provide the UART PCI device reference using pcidev_path_on_root. The uart_get_device() return type is changed, and files in which it gets used are updated. Change-Id: Ie0fe5991f3b0b9c596c3de9472e98e4091d7dd87 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-08-02soc/intel/common/pch: Move thermal kconfig selection into common/pchSubrata Banik
This patch moves SOC_INTEL_COMMON_BLOCK_THERMAL selection from respective soc/intel/{skl/cnl/icl} to common/pch/Kconfig. Change-Id: I7c9c8a87cfc5cb4c2fa8b215e56cc35c1f0cce28 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34650 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31soc/intel/skl: Add C232 chipset and reorder IDsFelix Singer
This patch ... - adds the PCH ID for C232 chipset, - renames "Premium" chipset to "HM170" (because of same IDs), - reorders the Skylake-H PCH IDs ascending by hex values. Used documents: - Intel 332690-005EN Change-Id: I859975fe7bcd3c10dead8fe150a2fbead9c64a51 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-31soc/intel/common/block/lpss: Correct the PCI device referenceAamir Bohra
The initial implementation was assigning the devfn as PCI device reference directly which was incorrect. Change-Id: Iad57e9bc6b2acf1823ee38116aea8a93feece6f9 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-31soc/intel/common/block: Enable PCH Thermal Sensor for threshold configurationSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown when S0ix is enabled. BUG=None BRANCH=None TEST=Verified Thermal Device (B0: D18: F0) TSPM offset 0x1c [LTT (8:0)] value is 0xFE. Change-Id: Ibd1e669fcbfe8dc6e6e5556aa5b1373ed19c3685 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33129 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-30soc/intel/cannonlake: Add new PCI IDsFelix Singer
* PCH IDs: H310, H370, Z390, B360, C242, HM370 * IGD IDs: Another variant of UHD-Graphics 630 * MCH/CPU IDs: Used at i3-8100 Used documents: * 337347-005 TESTED=Gigabyte Z390M Gaming Change-Id: I5be88ef23359c6429b18f17bcffbffb7f10ba028 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34600 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-29Revert "soc/intel/common: Set controller state to active in uart init"Christian Walter
This reverts commit 46445155ea21b0aa9106e12a00b9b1d89887a461. Reason for revert: Breaks coreboot. Either no UART working or the complete boot process stops. Platform: Intel Apollolake, tested on Up Squared Change-Id: If581f42e423caa76deb4ecf67296a7c2f1f7705d Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-24soc/intel/common: Set controller state to active in GSPI initMeera Ravindranath
Set the controller state to D0 during the GSPI sequence,this ensures the controller is up and active. BUG=b:135941367 TEST=Verify no timeouts seen during GSPI controller enumeration sequence for CML and ICL platforms. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I2f95059453ca5565a38650b147590ece4d8bf5ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/34449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-07-24soc/intel/common: Set controller state to active in uart initUsha P
Set the controller state to D0 during the uart init sequence, this ensures the controller is up and active. One more argument struct device *dev has been added to uart_lpss_init function for the same. BUG=b:135941367 TEST=Verify no timeouts seen during UART controller enumeration sequence in CML and ICL platforms. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I0187267670e1dea3e1d5e83d0b29967724d6063e Reviewed-on: https://review.coreboot.org/c/coreboot/+/34447 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21soc/intel: Expand SA_DEV_ROOT for ramstageKyösti Mälkki
We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I298f7f9a1c6a64cfba454e919eeaedc7bb2d4801 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel: Change file to __SIMPLE_DEVICE__Kyösti Mälkki
All the PCI accesses in the file are now accessed without SA_DEV_ROOT expanding to function call. Change-Id: I30d331e9c18a486ea971e8397a6e20a0f82d5f84 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel/common: gpio_defs: set trig to disable in PAD_CFG_GPO*Maxim Polyakov
According to the documentation [1], by default the RX Level/Edge Trig Configuration set to disable (2h = Drive '0') for each pad. Since this setting doesn't matter for the GPO pad, there is no need to change the default value for such pads. The patch updates PAD_CFG_GPO* macros to set trig to disable. It also resolves some problems of creating the PCH/SoC pads configuration based on information from the inteltool dump [2,3] [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN https://www.intel.com/content/dam/www/public/us/en/documents/ datasheets/100-series-chipset-datasheet-vol-2.pdf [2] https://review.coreboot.org/c/coreboot/+/34337 [3] https://github.com/maxpoliak/pch-pads-parser/issues/1 Change-Id: I39ba83ffaad57656f31147fc72d7a708e5f61163 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34406 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21soc/intel/common: add PAD_CFG_NF_BUF_TRIG macroMaxim Polyakov
In the case there is no the circuit diagram for motherboard, the PCH/SoC GPIOs config is based on information from the inteltool dump. However, available macros from gpio_defs.h can't define the pad configuration from this dump: 0x0440: 0x0000002084000500 GPP_A8 CLKRUN# 0x0448: 0x0000102184000600 GPP_A9 CLKOUT_LPC0 0x0450: 0x0000102284000600 GPP_A10 CLKOUT_LPC1 To convert these raw DW0/DW1 register values to macros, the following parameters must be set: func - pad function, pull - termination, rst - pad reset config, trig - rx level/edge configuration, bufdis - rx/tx (in/output) buffer disable. The patch resolves the above problem by adding a new macro for the native function configuration: PAD_CFG_NF_BUF_TRIG(pad, pull, rst, func, bufdis, trig) These changes were tested on Asrock H110M-DVS motherboard [2]. It also resolves the problem of automatically creating pads configuration [3,4] [1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2, February 2019, Document Number: 332691-003EN https://www.intel.com/content/dam/www/public/us/en/documents/ datasheets/100-series-chipset-datasheet-vol-2.pdf [2] https://review.coreboot.org/c/coreboot/+/33565 [3] https://github.com/maxpoliak/pch-pads-parser/issues/1 [4] https://github.com/maxpoliak/pch-pads-parser/commit/215d303 Change-Id: If9fe50ff9a680633db6228564345200c0e1ee3ea Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34337 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19soc/intel/common/block/xhci: Add API to disable USB devicesKarthikeyan Ramasubramanian
Add API to disable USB devices that are not present but are configured in the device tree either after probing the concerned port status or as explicitly configured by the variants. BUG=None BRANCH=octopus TEST=Boot to ChromeOS. Change-Id: Ied12faabee1b8c096f2b27de89ab42ee8be5d94d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33377 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19soc/intel/common: Add SOC specific function to get XHCI USB infoKarthikeyan Ramasubramanian
It feels appropriate to define SoC specific XHCI USB info in SoC specific XHCI source file and an API to get that information instead of defining it in elog source file. This will help in other situations where the information is required. BUG=None BRANCH=None TEST=Boot to ChromeOS. Change-Id: Ie63a29a7096bfcaab87baaae947b786ab2345ed1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34290 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18soc/intel: Use config_of()Kyösti Mälkki
Change-Id: I0727a6b327410197cf32f598d1312737744386b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: David Guckian
2019-07-18soc/intel: Use config_of_path(SA_DEVFN_ROOT)Kyösti Mälkki
We do not want to disguise somewhat complex function calls as simple macros. Change-Id: I53324603c9ece1334c6e09d51338084166f7a585 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34299 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-17soc/intel/cannonlake: Add device Ids for new CFL SKUs supportLean Sheng Tan
- Add CPU, MCH & IGD IDs for new Coffeelake SKUs - Add PCH, LPC, SPI IDs for CNP-H PCH CM246 & C246 - Make some minor alignments & naming corrections to align with the rest TEST= build, boot to both Linux & windows OS on CFL H & S platforms and verified all the device Id's in serial console logs. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: I343b11ea8d9c33eb189d7478511a473b145f4ab4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34157 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-16soc/intel/common/block/i2c: Set controller state to active in i2c initAamir Bohra
Set the controller state to D0 during the i2c init sequence, this ensures the controller is up and active. BUG=b:135941367 TEST=Verify no timeouts seen during I2C controller enumeration sequence Change-Id: I247ede44b8d1d6871e3e813b63f99a7f6398dd72 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34273 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16soc/intel/common/block/lpss: Add provision to set controller power stateAamir Bohra
Add function to set the power state of a LPSS controller. The API implemented can be used to enforce controllers in active state(D0) during initialization. BUG=b:135941367 Change-Id: I7540924885350de64caff91d920d6cc234154616 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34272 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-12soc/intel/common: Add Coffee Lake H 6+2 Xeon graphics idNico Huber
Change-Id: Ibf72a8db2e4292e5d5bb67b8778e1d1ebfa19632 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34164 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-12soc/intel/common: Add CM246 LPC device idNico Huber
Change-Id: Ic57ccf48988afbbba256172a7540bb02b88d1bbd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34163 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11soc/intel/intelblocks/gpio: Always expose GPIO PM constantsTim Wawrzynczak
These constants are needed in some ASL files, even when __ACPI__ is defined. Change-Id: I0f4f00b93d5d45794b7c9e0f72b51f3191eb3902 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34177 Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11soc/intel/common: Check bios_size and window_size after MIN operationJohn Zhao
Clang Static Analyzer version 8.0.0 detects that the result of log2_ceil(bios_size) and log2_ceil(window_size) is undefined if the value of bios_size and window_size are negative. Add negative value Check for bios_size and window_size after MIN operation. Change-Id: I28577b6e0ba0ab45bb7804c17ba1f26c4b078b15 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-11soc/intel/common/timer: Move USE_LEGACY_8254_TIMER into common/block/timerSubrata Banik
This patch moves USE_LEGACY_8254_TIMER Kconfig into common/block/timer for better code sharing. Also ported CB:33512 for SPT and ICP PCH. Change-Id: Ic767ff97aaa3eb7fa35ffa38fa416d006eaa6e78 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-10soc/intel/block/cpu: remove unused USE_COREBOOT_NATIVE_MP_INITArthur Heymans
Only CONFIG_USE_INTEL_FSP_MP_INIT makes a difference whether native MP init is used or not. Also make USE_INTEL_FSP_MP_INIT mutually exclusive with USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI as this option requires coreboot to set up AP and publish PPI based on it. Change-Id: I65b80805d3cd7b66f8c9f878d3c741b98f24288d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33357 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-09drivers/intel: Move FSP stage_cache implementation into common blockSubrata Banik
Change-Id: Iebb6d698c236a95162b3c7eb07987483a293b50a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-06soc/intel/common/block/sata: Convert DWORD width Read/Write to BYTE widthSubrata Banik
As per EDS Sata port implemented register is byte width (bits[3:0]) hence converting required DWORD based read/write to BYTE width read/write. TEST=Able to boot from SATA device on CML hatch. Change-Id: I545b823318bae461137d41a4490117eba7c87330 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34070 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-04soc/intel/common: Increase SMM_MODULE_STACK_SIZE to 0x800Kane Chen
While running the s0ix cycling test, we observed SMM Handler caused a stack overflow. This error happens during event log access. This change is to increase the SMM_MODULE_STACK size to 0x800 BUG=b:135551854 TEST=suspend_resume test pass 500+ cycles, originally issue happenes within 150 cycle Change-Id: Ib4686b4d2d4fc3976068779314f4ee15ef4a8ae2 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-24Replace ENV_RAMSTAGE with ENV_PAYLOAD_LOADERSubrata Banik
This patch relying on new rule, ENV_PAYLOAD_LOADER which is set to ENV_RAMSTAGE. This approach will help to add future optimization (rampayload) in coreboot flow if required. Change-Id: Ib54ece7b9e5f281f8a092dc6f38c07406edfa5fa Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2019-06-21soc/intel: Provide SPD manufacturer ID and module type to SMBIOSDuncan Laurie
The DIMM manufacturing ID was not being initialized and so the DIMMs were not described in SMBIOS tables properly. The module type can also be provided, but the SMBIOS code expects SPD module type values from DDR2 so the DDR3/4 values are adjusted before sending to SMBIOS. BUG=b:134897498 BRANCH=sarien TEST=dump and compare with dmidecode BEFORE: Type: DDR4 Manufacturer: Unknown (0) Form Factor: Unknown AFTER: Type: DDR4 Manufacturer: Hynix/Hyundai Form Factor: SODIMM Change-Id: Id673e08aa6e3dad196009c3c21a3dda2f40c9e42 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-21soc/intel/common/block/pcr: Remove unneded 'else'Elyes HAOUAS
'else' is not needed after a 'break' or 'return'. Change-Id: Ib3371ef6edb85a47ed734dd2ff9ce94008aa4e65 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33336 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Vlado Cibic Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-16soc/intel/common: Fix booting issue without default IGD enabledSubrata Banik
This patch ensures to boot platform without onboard GFX (PCI B0:D2:F0) enabled from mainboard devicetree.cb. TEST=Previously platform was dying at "GMADR is not programmed!" with IGD disabled. Change-Id: I8c907ee25db4538a84890f2ccc3187afa86604b8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33449 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13soc/intel/{cml, whl}: Add option to skip HECI disable in SMMSubrata Banik
This patch provides an additional option to skip HECI function disabling using SMM mode for WHL and CML platform, where FSP has dedicated UPD to make HECI function disable. User to select HECI_DISABLE_USING_SMM if FSP doesn't provided dedicated UPD. Right now CNL and ICL platform will use HECI_DISABLE_USING_SMM kconfig to make HECI disable and WHL/CML has to rely on FSP to make HECI disable. Change-Id: If3b064f3c32877235916f966a01beb525156d188 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-13soc/intel/icelake: Replace PCI device LPC to ESPI as per EDSSubrata Banik
As per Icelake EDS PCI device B:D:F (0:0x1f:0) referred as ESPI, hence modify SoC code to reflect the same. This patch replaces all SoC specific PCI LPC references with ESPI except anything that touches intel common code block. Change-Id: I4990ea6d9b7b4c0eac2b3eea559f5469f086e827 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
2019-06-09soc/intel/common: Skip SoC GT programming based on CONFIG_SKIP_GRAPHICS_ENABLINGSubrata Banik
Skip GT specific programming in coreboot to support early parts without GT enable. Change-Id: I231e13367cbfbafbfb0cb4235487dbcbcae76820 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33189 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-08src/soc/intel/skylake/bootblock: Add SPT C236 to PCH TableChristian Walter
Add Skylake C236 to the PCH Table. The one which was already in there is actually the CM236 and not the C236. This can be checked in datasheet: 100-series-chipset-datasheet-vol-1 p. 25. Change-Id: I435927f15e9d3219886375426b09c68632dfe3d9 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33248 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-07soc/intel: Add some missing MCH PCIe IDsKeno Fischer
These are documented in the Intel Datasheet entitled "6th Generation Intel® Processor Datasheet for S-Platforms" "6th Generation Intel® Processor Datasheet for H-Platforms" (Volume 2) Without them, coreboot fails to properly inform the payload of the amount of available memory. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Change-Id: I5b810c6415c4aa0404e5fa318d2c8db292566b8a Reviewed-on: https://review.coreboot.org/c/coreboot/+/33286 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-06-06src/soc/intel/common/smbios: Add addtional infos to dimm_infoChristian Walter
Add ECC Support and VDD Voltage to dimm_info struct. Now Bus Width and ECCSupport will be propagated correctly in SMBIOS Type 17 Entry. Change-Id: Ic6f0d4b223f1490ec7aa71a6105603635b514021 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33031 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03soc/intel: Replace UART_BASE() and friends with a KconfigNico Huber
Re-add the Kconfig CONSOLE_UART_BASE_ADDRESS. It was lost by accident on APL at least. It is used outside of soc/intel/ scope, e.g. to con- figure SeaBIOS. As we only ever configure a single UART for the coreboot console, we don't need different addresses for each possible UART. Which saves us a lot of code. Change-Id: I28e1d98aa37a6acb57b98b8882fc4fa131d5d309 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-03src/soc/intel/common/block/sgx: Add missing new linesChristian Walter
Added missing new lines to Debug Output. Change-Id: I30f208a60661451bc0794c705113e8d19a68b0eb Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33035 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-03soc/intel/common/uart: Correctly guard uart_platform_base()Nico Huber
We should only provide this implementation when the Intel LPSS UART is used. Otherwise, no other UART could be used for the console with these SoCs. Change-Id: Iebd89edb3f21d4a68587fd02659b4d529f3f4bbe Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-06-03soc/intel/common/uart: Only return valid UART baseNico Huber
We only configure the base address for the console UART, the other addresses are never assigned to the hardware. It seems better to return 0 for them instead of a spurious value. Change-Id: I3fa5c99958b56ca5b0b603917c086bdddb677fa2 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-06-03soc/intel/common/uart: Drop dead call to soc_uart_set_legacy_mode()Nico Huber
The only path that leads here is guarded by both !DRIVERS_UART_ 8250MEM_32 and INTEL_LPSS_UART_FOR_CONSOLE but the latter selects the former. Change-Id: I6e0765b028572950991c45b45b2051f4f176a94a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-06-03soc/intel/common/lpss: Drop now unused lpss_clk_read()Nico Huber
Change-Id: I7def72e820ee1a4fa47c34b26dab9e0886ba74e6 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
2019-06-03soc/intel/common/mmc: Replace IS_ENABLED() with CONFIG()Nico Huber
Change-Id: I99d51176f6d7d6a98a3a3c82aa8e8eee73344496 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33111 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-30soc/intel/common/block/gpio: Fix the mask for gpio_pm_configureFurquan Shaikh
gpio_pm_configure clears out all the bits related to PM configuration in MISCCFG register and sets only the bits requested by mainboard. The mask as it is set currently results in preserving all PM bits instead of clearing them. This change updates the mask to ensure that the PM bits are cleared before setting the ones requested by mainboard. Change-Id: I5b8c04952775dc1e94fa229328be2f3c1102a468 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-05-29soc/intel/common: Check bios_size and window_size after MIN operationJohn Zhao
Clang Static Analyzer version 8.0.0 detects that log2_ceil(bios_size) and log2_ceil(window_size) are garbage or undefined if the value of bios_size and window_size is zero. Check bios_size and window_size after MIN operation to prevent error. TEST=Built and boot up to kernel. Change-Id: Ifc3f3da52d129ef5d6063a46b045603a236be759 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-29soc/intel/common: Set GSPI clock value to prevent division by zeroJohn Zhao
Clang Static Analyzer version 8.0.0 detects the division by zero if gspi_clk_mhz is initialized to 0. gspi_clk_mhz is referred to speed_mhz in devicetree. Set gspi_clk_mhz to 1 if it is detected as 0 in order to prevent the division by zero in DIV_ROUND_UP operation. Then the value of (ref_clk_mhz - 1) will be fed into GSPI's Serial Clock Rate value. TEST=Built and boot up to kernel. Change-Id: I6a09474bff114c57d7a9c4c232bb636ff287e4d5 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32974 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-05-29soc/intel/common/pmc: Don't use CAR_GLOBALArthur Heymans
All platforms using this code use NO_CAR_GLOBAL_MIGRATION. Change-Id: I426dee60521045db4711cd253432c65223a64b93 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-29soc/intel/common/cse: Don't use CAR_GLOBALArthur Heymans
All platforms using this code have NO_CAR_GLOBAL_MIGRATION. Change-Id: If952ad8129e1fa6e45858cb77ec99c9fec55c4a6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-29soc/intel/common/cse: Declare g_cse staticallyArthur Heymans
Change-Id: I91b6ce3b52d987e2fc0f79e550fda2891502bfe8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-29soc/intel/common/gspi: Don't use CAR_GLOBALArthur Heymans
All platforms using this code have NO_CAR_GLOBAL_MIGRATION. Change-Id: I5dfbc718fd82f0511b0049383e4e93c6f15ee932 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32999 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-29Clean up unused arch/early_variables.h headerArthur Heymans
Change-Id: Ib863e23863ba6d7504b6c4d32de2f1fea4e57fec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-05-28src/include/device/pci_ids.h: Add Kabylake C236 DeviceChristian Walter
Change-Id: Ib11981543575311a32896df385d44cf30aa9387f Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32964 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23soc/intel/skylake: Add PCI Id for Kabylake DTChristian Walter
Change-Id: I496b3a91f765d4fa137c32c9ee1e244803fc25d8 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32850 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-23intel/common/block/scs: Add ability to send early CMD0, CMD1Bora Guvendik
In order to improve boot time with emmc, add ability to send CMD0 and CMD1 early in romstage. This way, by the time system boots to payload, we are ready to continue with emmc setup and we don't need to send CMD0 in payload again, and wait for card to reset and be ready. BUG=b:78106689 TESTS = Boot to OS Force early_mmc_wake_hw() to return error, recover in payload Force an error in payload, make sure system can recover/boot Change-Id: I3488b077bf5100a1e0f2c879fb1436105607d25e Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/25068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-22post_code: add post code for hardware initialization failureKeith Short
Add a new post code POST_HW_INIT_FAILURE, used when coreboot fails to detect or initialize a required hardware component. BUG=b:124401932 BRANCH=sarien TEST=build coreboot for sarien and arcada platforms Change-Id: I73820d24b3e1c269d9d446a78ef4f97e167e3552 Signed-off-by: Keith Short <keithshort@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-21soc/intel: Remove unused pointer argument in mca_configure()Subrata Banik
Change-Id: Iad3982d9db07a1f17ac39e87ff9c37956e40c258 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: David Guckian Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-20soc/intel/common/block/gpio: Add gpio_pm_configure() functionSubrata Banik
This patch adds new function to perform gpio power management programming as per EDS. BUG=b:130764684 TEST=Able to build and boot from fixed media on ICL and CML. Change-Id: I816a70ad92595f013740a235a9799912ad51665e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-18soc/intel: Fill DIMM serial number from SPDDuncan Laurie
Fill the DIMM serial number field for SMBIOS from the saved SPD data that is returned by FSP. BUG=b:132970635 TEST=This was tested on sarien to ensure that SMBIOS type 17 filled the serial number from the DIMM: Handle 0x000B, DMI type 17, 40 bytes Memory Device Locator: DIMM-A Serial Number: 41164beb Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-13soc/intel: Geminilake Refresh feature request supportJohn Zhao
Add 0x706a8 for GLK Refresh CPU stepping ID. BUG=b:132414963 BRANCH=None TEST=Image built successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I4641d9bd4c82211e7200f617cae9043b0f2f38d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-05-09Change the guard for bootblock_systemagent_early_init to ENV_BOOTBLOCKRonald G. Minnich
The definition of bootblock_systemagent_early_init was guarded by !ENV_RAMSTAGE. But it's only called in the bootblock. So guard it with ENV_BOOTBLOCK instead. Change-Id: I143cf72e4a63b176e4772575e7a60a2a611e4ad9 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-05-09soc/intel/common/acpi: Remove EC PTS/WAK dynamic loadingLijian Zhao
Use CondRefOf to replace config optios for PTS/WAK acpi method dynamic loading. Then we can move EC PTS and WAK method to be under mainboard. BUG=N/A TEST=Build sarien source code, check build/dsdt.dsl have EC.PTS method included, build whlrvp soure, check build/dsdt.dsl don't have EC.PTS method. Both able to build pass. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I9f4bd7240832caf070e65039e4ba2d8656371da8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32371 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/skylake: Add missing PCH IDsMarius Genheimer
Added IDs for: - H170 - Z170 - Q170 - Q150 - B150 Used documents: - 332690-005EN Tested on Gigabyte GA-Z170N-WIFI Change-Id: If20a2b764afa02785a97948893dbc5b5f60aff60 Signed-off-by: Marius Genheimer <mail@f0wl.cc> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32517 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-06soc/intel/common: Add new PAD_CFG macro.Tim Wawrzynczak
Added macro named PAD_CFG_GPI_GPIO_DRIVER_SCI, for pads that need to be configured as GPI, GPIO Driver mode, and SCI interrupt. Also remove PAD_IRQ_CFG_DUAL_ROUTE macro (subsumed by PAD_CFG_GPI_IRQ_WAKE). BUG=none BRANCH=none TEST=Compiles Change-Id: I0332c64e2fa62ce29c772444606adbfdf9c9afc4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32485 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-01soc/intel/common: Set RX_DISABLE for pads configured as NCFurquan Shaikh
For GPIO pads that are configured as no-connect (PAD_NC), setting it as GPI (with Rx enabled) leads to GPE0_STS being set incorrectly. Though this is not an issue in practice (GPE0_EN is not set, so no events triggered), it can confuse users when debugging GPE related issues. This change configures PAD_NC to have Rx disabled along with Tx to ensure that it does not end up setting GPE0_STS bits for unwanted GPIO pads. P.S.: IOSSTATE config does not have a TxDRxD setting, so leaving that configuration as is. BUG=b:129235068 TEST=Verified that GPE0_STS bits are not set for pads that are marked as PAD_NC. Change-Id: I726cc7b86a94e7449352cd8a8806d4d775c593dc Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2019-04-29Revert "soc/intel/common/block: add VMX support"Nico Huber
This reverts commit 9aae51ad1141a47d5c2f7133b02f5f0ab6168860. Proper code in cpu/intel/common/ shall be used instead. Change-Id: I4a5d558b03497d106083eece10c5b34e0e7cbb2d Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29683 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29soc/intel/common: Add support to clear GPI IS & IE registersKarthikeyan Ramasubramanian
Add support to reset the GPI Interrupt Status & Enable registers so that the system does not experience any interrupt storm from a GPI when it comes out of one of the sleep states. BUG=b:130593883 BRANCH=None TEST=Ensure that the Interrupt status & enable registers are reset during the boot up. Ensure that the system boots fine to ChromeOS. Change-Id: I99f36d88cbab8bb75f12ab1a4d06437f837841cb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-29soc/intel: Add GPI interrupt config register offset infoKarthikeyan Ramasubramanian
Add the offset information for GPI interrupt status and enable register in the pad_community structure. Populate the concerned information for individual SoCs. This offset information is required to clear the interrupt configuration during the bootup. BUG=b:130593883 BRANCH=None TEST=Ensure that the interrupt configuration are cleared during bootup. Ensured that the system boots to ChromeOS. Change-Id: I8af877a734e8d49b700d720b736da8764985a8f8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-23soc/intel/common/acpi: Add dynamic method around sleepLijian Zhao
Declare plaform level hook method before and after system sleep for possible power management related usage. BUG=N/A TEST=pass with make what-jenkins-does Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ie63711748b6dbb99d34910824f2059464543e162 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32366 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23soc/intel/common: Add SOC_INTEL_DEBUG_CONSENT to control debug interfaceKane Chen
SOC_INTEL_DEBUG_CONSENT config is generally to enable default debug interface of SoC. Ex: USB DBC, DCI debug interface on cnl, whl, cml. Change-Id: I313d80d6c63fd37164c63f78e9e69d3cb4a5566b Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32337 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-23src: include <assert.h> when appropriateElyes HAOUAS
Change-Id: Ib843eb7144b7dc2932931b9e8f3f1d816bcc1e1a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: David Guckian
2019-04-23src: Add missing include 'console.h'Elyes HAOUAS
Change-Id: Ie21c390ab04adb5b05d5f9760d227d2a175ccb56 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-04-21cpu/x86: Move checking for MTRR's as a proxy for proper CPU resetArthur Heymans
Checking for empty MTRR_DEF_TYPE_MSR as a proxy for proper CPU reset is common across multiple platforms. Therefore place it in a common location. Change-Id: I81d82fb9fe27cd9de6085251fe1a5685cdd651fc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-19soc/intel/common: Inject SMBIOS type 16 tableLijian Zhao
Add SMBIOS type 16 table for physical memory array, there's two item had been left over.ECC and max capacity, as of now we set it to fixed value as all the platform support by Intel common code don't support ECC memory and so far the biggest capacity is 32GB. BUG=b:129485635 TEST=Boot up with Sarien platform and check with dmidecode, the following is the result: Handle 0x000D, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 2 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: If9c5831956ef273c84d831a2b1572b3442eed961 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32286 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-17soc/intel/common: Add the audio PCI device ID for CometlakeV Sowmya
This patch adds the PCI device ID for cometlake in dsp.c Change-Id: Ia28e3b9d1dc27ffcf24dfb2ef1efa9ae9c4027c8 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-04-17soc/intel/common/timer: Calculate TSC frequency based on CPUID 0x15Subrata Banik
This patch ensures to follow Intel SDM Vol 3B Sec 18.7.3 to calculate nominal TSC frequency. As per SDM recommendation: For any processor in which CPUID.15H is enumerated and MSR_PLATFORM_INFO[15:8] (which gives the scalable bus frequency) is available, a more accurate frequency can be obtained by using CPUID.15H This patch also adds header file to capture Intel processor model number. BUG=b:129839774 TEST=Boot ICL platform and calculate TSC frequency using below methods 1. TSC freq calculated based on MSR 0xCE tsc: Detected 1600.000 MHz processor 2. TSC freq calculated based on CPUID 0x15 tsc: Detected 1612.800 MHz TSC Method 2 actually reduce ~25ms of boot performance time. Note: Method 2 is recommended from gen 6 processor onwards. Change-Id: I9ff4b9159a94e61b7e634bd6095f7cc6d7df87c7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32283 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-04-13soc/intel/cpulib: Remove redundent enable/disable functionsSubrata Banik
This patch removes multiple enable/disable function definitions and make use of single function with argument to know feature status (enable/disable). Change-Id: I502cd2497b07e9de062df453ecbb9c11df692f5a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32282 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-13soc/intel/cpulib: Factor out IA32_PERF_CTL (0x199) MSR codeSubrata Banik
This patch replaces multiple IA32_PERF_CTL programming with single helper function. TEST=Build and boot WHL and CML platform. Change-Id: I212daa61aa11191dd832630461b517d3dbedd6e1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32281 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-06src: Use include <delay.h> when appropriateElyes HAOUAS
Change-Id: I23bc0191ca8fcd88364e5c08be7c90195019e399 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: David Guckian
2019-04-06src: Use #include <timer.h> when appropriateElyes HAOUAS
Also, extra-lines added or removed and local includes moved down. Change-Id: I5e739233f3742fd68d537f671642bb04886e3009 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32009 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-29src: Use include <reset.h> when appropriateElyes HAOUAS
Change-Id: I3b852cae4ef84d257bf1e5486447583bdd16b441 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/29301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-28soc/intel/common: Move support to log XHCI wake eventsKarthikeyan Ramasubramanian
The policy to identify and log the XHCI wake events is similar between skylake and apollolake. Hence move the similar parts to a common location. BUG=b:123429132 BRANCH=None TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up events due to USB are logged into the event logs. 6 | 2019-03-21 09:22:18 | S0ix Enter 7 | 2019-03-21 09:22:22 | S0ix Exit 8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9 9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13 10 | 2019-03-21 09:23:20 | ACPI Enter | S3 11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9 12 | 2019-03-21 09:23:30 | ACPI Wake | S3 13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13 Change-Id: Ia6643342e3292984e422ff3c3fcd4bc0d99f947e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-27device/pciexp_device: Convert LTR non-snoop/snoop value into common macroSubrata Banik
Change-Id: I3d14a40b4ed0dcc216dcac883e33749b7808f00d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2019-03-24soc/intel/common: Remove common chip config use_fsp_mp_initSubrata Banik
This patch ensures to make use of common MP Init Kconfig to choose desire method to peform MP initialization for platform. Change-Id: I4ee51276026748e8daf154f89e57095e8fe50280 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-24soc/intel/common: Add Kconfig option to choose desired MP Init for platformSubrata Banik
mainboard users can select correct MP Init Kconfig in order to perform MP initialization. 1. Native coreboot MP Init. 2. FSP to do MP Init. 3. FSP to make use of coreboot MP service PPI to perform MP Initialization Change-Id: Ifbea463fdaf97d68c21a759c37f49492d58a056b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-21{northbridge, soc, southbridge}/intel: Make use of generic set_subsystem()Subrata Banik
This patch removes all local definitions of sub_system functions and make use of common generic pci_dev_set_subsystem() from PCI bridge and Cardbus devices as well. Change-Id: I5fbed39ed448baf11f0e0786ce0ee94741d57237 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 10:42:35 +0000