summaryrefslogtreecommitdiff
path: root/src/soc/intel/cannonlake/chip.h
AgeCommit message (Collapse)Author
2020-03-04src: capitalize 'PCIe'Elyes HAOUAS
Change-Id: I55bbb535372dc9af556b95ba162f02ffead2b9e2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-28soc/intel/cannonlake: Plumb TetonGlacierMode into dtEdward O'Callaghan
The following plumbs through the enabling of Intel's TetonGlacierMode allows for reconfiguring the PCIe lanes at runtime for hybrid drives to be accessable via devicetree. BUG=b:149171631 BRANCH=none TEST=Swap between x4 NVMe drives and 2x2 Teton Glacier hybrid drives and run lsblk, lspci, and nvme tools to confirm dynamic PCIe configuration on Puff. Change-Id: Id9a72161494db6a4da4abd3302b06df7c70634ab Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-04soc/intel/cannonlake: Allow Audio DSP OSC qualification for low power idleAamir Bohra
With Audio DSP OSC qualification disabled from S0ix criteria. S0ix is achieved before the DSP is suspended. When driver tries to suspend DSP its already turned off. BUG=b:139481313 Change-Id: I20b793b95483af03ce4ae068ac07864a9e90d39b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37604 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-18soc/intel/cannonlake: Add chip config for SATA strengthJamie Chen
Add config to chip.h for tuning SATA gen3 strength. BUG=b:147351936 BRANCH=none TEST=build successful in puff Change-Id: I4dcd23834fa3c01c1d88697a7bb8cf361709b62e Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38432 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-08soc/intel/cannonlake: Add VR config for CMLJamie Chen
Add VR config IccMax, DC and AC loadline defaults for CML. Add cpu_pl2_4_cfg to switch two kinds of VR design. BUG:b:145094963 BRANCH:none TEST:build coreboot and fsp with enabled fw_debug. Flashed to device and checked the log. All VR configs were set correctly. Change-Id: I3922bfad5c21dafc64fb05c7d9343b9835b58752 Signed-off-by: Jamie Chen <jamie.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Edward Hill <ecgh@chromium.org>
2019-12-12soc/intel/{cnl,icl,skl,tgl}: Remove unused gpe0_en_* from chip.hFurquan Shaikh
gpe0_en_* seem to have been copied over from previous generations but recent SoCs don't use it. This change gets rid of these unused members. Change-Id: I165e66aeefde4efea4484f588c774795987ca461 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-27soc/intel/cannonlake: Disable USB2 PHY Power gatingSurendranath Gurivireddy
Workaround to disable USB2 PHY power gating to fix issue seen when Apple 87W USB-C charger is connected in S0ix state on WHL platforms (based on Intel's recommendation). Issue is seen on CML platforms also. So, disable power gating for Drallion too. Add devicetree entry to set the flag to disable USB2 PHY power gating for different CNL PCH based platforms BUG=b:133775942 TEST=Connect Apple 87W USB-C charger when the system is in sleep and check if the system wakes up after that Signed-off-by: Surendranath Gurivireddy <surendranath.r.gurivireddy@intel.com> Change-Id: I95909c73de758fccc7f616a330c1e1f0667e8c25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36519 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-26soc/intel/cannonlake: Add chip config to override CPU flex ratioSubrata Banik
This patch provides options to override descriptor default CPU flex ratio from coreboot code. cpu_ratio_override to provide the required CPU ratio. Note: Don't override the flex ratio if cpu_ratio is 0. BUG=b:142264107 TEST=Without override flex_ratio is 0 and verified booting to OS after overriding with flex_ratio value 5. Change-Id: Ib01650f52f3d402f669e7e7f5b28a648b86f08ec Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-11-04soc/intel/sgx: convert SGX and PRMRR devicetree options to KconfigMichael Niewöhner
The devicetree is not made for user-choosable options, thus introduce Kconfig options for both SGX and the corresponding PRMRR size. The PRMRR size Kconfig has been implemented as a maximum value. At runtime the final PRMRR size gets selected by checking the supported values in MSR_PRMRR_VALID_CONFIG and trying to select the value nearest to the chosen one. When "Maximum" is chosen, the highest possibly value from the MSR gets used. When a too strict limit is set, coreboot will die, printing an error message. Tested successfully on X11SSM-F Change-Id: I5f08e85898304bba6680075ca5d6bce26aef9a4d Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-09-29soc/intel: Rename <intelblocks/chip.h>Kyösti Mälkki
The filename chip.h has a special purpose with the generation of static devicetree, where the configuration structure name matches the path to the chip.h file. For example, soc/intel/skylake/chip.h defines struct soc_intel_skylake_config. The renamed file did not follow this convention and the structure it defines would conflict with one defined soc/intel/common/chip.h if such is ever added. Change-Id: Id3d56bf092c6111d2293136865b053b095e92d6b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-09-12soc/intel/cnl: Remove unnecessary FSP UPD “PchPwrOptEnable” usageSubrata Banik
PchPwrOptEnable FSP UPD is for internal testing and not really available in externally released FSP source hence assigning this UPD using devicetree config dmipwroptimize doesn't do anything. TEST=Build and boot sarien/arcada. Change-Id: I6da2a088fb697e57d12008fa18bd1764b3da7765 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-09-12soc/intel/cannonlake: Add config for sata devslp pad reset configurationAamir Bohra
CML FSP now provides a provision to configure the SATA devslp GPIO pad reset configuration. This config would help set the the required pad reset configuration. BUG=b:133000685 Change-Id: I4eaea9c6da67f1274ad3e392046a68cddc1b99b6 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-08-26soc/intel/cannonlake: Add config to disable display audio codecAamir Bohra
FSP 1263 looks for UPD configuration of "AudioLinkHda" if false it disables SDI# link for the codec. Change-Id: I8330f47416e580bf6b9ca1faed1de5cd578d0e2e Signed-off-by: Selma BENSAID <selma.bensaid@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35078 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20soc/intel/cnl: Add provision to configure SD controller write protect pinAamir Bohra
Cometlake FSP allows provison to configure SD controller WP pin, As some of board design might choose not to use the SD WP pin from SD card controller. This implementation adds a config that allows to enable/disable SD controller WP pin configuration from FSP. BUG=b:123907904 Change-Id: Ic1736a2ec4b9370d23a8e3349603eb363e6f59b9 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34900 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28soc/intel/cannonlake: fix use of legacy 8254 timerMatt DeVillier
FSP sets the use of the 8254 timer via the Enable8254ClockGating UPD, which defaults to enabled, overriding what is set by coreboot. Per the FSP integration guide, this UPD needs to be disabled when a legacy OS is booted (ie, when SeaBIOS is used as the payload). Add a Kconfig option to set the UPD properly based on payload selection, and remove the existing coreboot code in lpc.c since it is either ineffective or being overridden by FSP. Test: build/boot out-of-tree WHL board with both SeaBIOS and Tianocore, ensure 8254 timer usage set correctly for each. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I0e888bf754cb72093f14fc02f39bddcd6d288203 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21soc/intel/cannonlake: Rename SOC_INTEL_COMMON_CANNONLAKE_BASEArthur Heymans
What it really means to do is to use different FSP headers. Change-Id: I3c75d4aac8525ab2639608fb9c1b3a9afef0e943 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33575 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-05-20soc/intel/cannonlake: Make use of gpio_pm_configure()Subrata Banik
Provide option in chip.h to set dynamic local clock gating setting. BUG=b:130764684 TEST=Able to build and boot CML. Change-Id: Iec60076398b745e11d5025e4d7a5c35374d918a4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-11soc/intel/cnl: Enable VT-dJohn Zhao
Enable VT-d through fsp upd VtdDisable. Update remapping structure types in numerical order as all remapping structures of type 0 (DRHD) enumerated before remapping structures of type 1 (RMRR), and so forth. BUG=b:130351429 TEST=Booted to kernel and verified the DMAR table contents. Change-Id: I1d20932e417b9d324edd98c8f2195dc228d2e092 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2019-05-09soc/intel/cannonlake: Fix pcie clock numberLijian Zhao
Cannonlake PCH LP have total 6 pcie clocks and Cannonlake PCH H have total 16 pcie clocks. It is different with pcie root port numbers. BUG=CID 1381814 TEST=Build and boot up fine on sarien platform. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I909b5b584c596e6fe878ffe24d9cabc53c4576ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/32672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: John Zhao <john.zhao@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-05-07mb/google/sarien: Add SMBIOS type 9 fieldsLijian Zhao
Fill SMBIOS type 9 fields for both sarien and arcada platform. BUG=b:129485789 TEST=Boot up into OS and check with dmidecode -t 9 to we do have entry. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I47a697131b7aeeb64e0c4b4c0556842f1cb1b02e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-05-01mb/google/sarien: Disable S5 wake on LAN by defaultEric Lai
Chromebook doesn't require support wake on LAN in S5. Disable it by default for power saving. BUG=b:131571666 TEST= check LAN indicator is off under S5 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ia90c9d2f3ea9b3580e9a7bbfb47c917dd51e3c03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32502 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-23soc/intel/cannonlake: Enable PlatformDebugConsent by KconfigKane Chen
This change is mainly to control PlatformDebugConsent FSP UPD. PlatformDebugConsent is enabled if SOC_INTEL_CANNONLAKE_DEBUG_CONSENT != 0. PlatformDebugConsent in FspmUpd.h has the details. BUG=b:130203864 TEST=boot ok and PlatformDebugConsent can be controlled by Kconfig Change-Id: Ib845b5e42bc78fb352a0c97c6301f2aeca522f29 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32297 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-16soc/intel/cannonlake: Configure Vmx support using KconfigRonak Kanabar
Change VmxEnable UPD values based on Kconfig ENABLE_VMX and remove it from Devicetree and chip.h Remove Vmx dependency on Vt-d Change-Id: I4180c2270038a28befd6ed53c9485905025a15ba Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32117 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-01soc/intel/cannonlake: Add FSP UPD to unlock GPIO pads in devicetreeKrishna Prasad Bhat
FSP has a UPD to unlock all GPIO pads. This parameter is disabled by default. Add a chip parameter so that GPIO pads can be unlocked on mainboard level in devicetree and therefore this feature can be used if needed. BUG=b:128686027 Change-Id: Iad9e8a209dc3f8ca0c994e8c1da329918409a1d4 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-27soc/intel/cannonlake: Configure voltage margining policiesKrzysztof Sywula
For systems that integrate GbE controllers, following parameters should be configured: SlpS0WithGbeSupport: enable PchPmSlpS0VmRuntimeControl: disable, PchPmSlpS0Vm070VSupport: disable, PchPmSlpS0Vm075VSupport: disable. TEST=boot on any GbE supported WHL platform Change-Id: I02aaf0b77b8fc1555a3a424c02acfada21707d0e Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-03-21soc/intel/cannonlake: Assign FSP UPDs for HPD and Data/CLK of DDI portsKrishna Prasad Bhat
Assign the FSP UPDs for HPD and DDC of DDI ports. FSP assumes that all DDI ports are enabled and hence configures the HPD and CLK for DDI ports. This patch initializes only the required UPDs to enable display ports. BUG=b:123907904 TEST=DP devices working correctly. Change-Id: Ic0c172cd3d087fc8f49b01ab23feffdababf7166 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-16soc/intel/cannonlake: Add required FSP UPD changes for CMLSubrata Banik
This patch adds required FSP UPD changes for CometLake SoC. Also this patch tries to create common parse logic for CometLake as well as cannonlake SOC. We parse device tree parameters for PCI devices and fill values in FSP UPDs. We fill UPDs based on pci device config as well as SerialIoDev config of devicetree. For PCI devices, if PCI device is disabled from devicetree, we'll assign disable value to FSP UPD. In case devicetree doesn't fill this parameter or value is invalid in SerialIoDev config, default mode will be set to PCI. In case of valid value, we'll fill the same value into FSP UPD. BUG=none BRANCH=none TEST=check if CML board boots and proper UPD values are filled. Change-Id: Ib92b660409ab01d70358042b2ed29b8bf9cab26d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-02-22soc/intel/cannonlake: Add support for setting FSP-S PcieRpHotPlug from ↵Jeremy Soller
devicetree Tested on system76 galp3-c Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I3aa8990a335e413628c016007ebabf7142aef80d Reviewed-on: https://review.coreboot.org/c/31535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-21src/soc/intel/cannonlake: Add PsysPmax settingGaggery Tsai
This patch feeds PsysPmax setting to FSP through UPD and adds a psys_pmax member in chip information so that we can set PsysPmax through DT. The PsysPmax needs to be set correctly mapping to maximum system power. Otherwise, system performance would be limited due to the default PsysPmax setting in FSP is only 21W. BUG=None BRANCH=None TEST=Set psys_pmax to an example value eg 101 in DT && put debug code in FSP to print the PsysPmax value before sending to Pcode, ensure the setting is correctly programmed. Change-Id: Ia88ea17bc661a388c5b9bc3e59abc27c9f262977 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/31505 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-07soc/intel/cannonlake: Add Whiskeylake SoC kconfigSubrata Banik
This patch performs below tasks 1. Create SOC_INTEL_COMMON_CANNONLAKE_BASE kconfig. 2. Allow required SoC to select this kconfig to extend CANNONLAKE SoC support and add incremental changes. 3. Select correct SoC support for hatch, sarien, cflrvps and whlrvp. * Hatch is WHL SoC based board * Sarien is WHL SoC based board * CFLRVP U/8/11 are CFL SoC based board * WHLRVP is based on WHL SoC 4. Add correct FSP blobs path for WHL SoC based designs. Change-Id: I66b63361841f5a16615ddce4225c4f6182eabdb3 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/31133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-01-28src/soc/intel/cnl/chip.h: Fix preprocessor conditionAngel Pons
Commit dc666f5 (soc/intel/cannonlake: Change in SaGv options) added a conditional preprocessor directive, but its condition was incorrect because SOC_INTEL_CANNONLAKE is selected for CNL, CFL and WHL. Thus, an explicit check for !SOC_INTEL_COFFEELAKE is required. While we are at it, clean up the comment above a bit. BUG=b:123184474 Change-Id: I8a6959bb615fb5668cbfe54339747d135bd5a005 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/31095 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-17soc/intel/cannonlake: Change in SaGv optionsRonak Kanabar
CNL,WHL and CFL all are not using midfixed option in SaGv so keeping it for CNL only and removing it for others. Change-Id: I754515c2f8e249479c603872c61ac9a006e962ff Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/30917 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16soc/intel/cannonlake: Add processor power limits control supportSumeet Pawnikar
Add processor power limits control support to configure values. BRANCH=None BUG=b:122343940 TEST=Built and tested on Arcada system Change-Id: I5990dc05b51481a0074855914cef20cf07378cde Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/30907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-08soc/intel/cannonlake: Add FSP UPD for minimum assertion widthDuncan Laurie
Expose the FSP tunables for the chipset minimum assertion width settings which can be configured per-board. The defaults appear to be different from what is listed in the FSP header documentation so I tried to list what the actual default is based on the source rather than what is stated the header comments. Change-Id: Ie0606c2984727adf13c9fb8395586287162e49ca Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/30719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2018-12-19soc/intel/cannonlake: SATA and DMI power optimizeLijian Zhao
Expose the FSP interface to enable SATA and PCH side DMI power optimize options. Actual step executed in FSP, step defined in cannonlake pch BIOS spec(CDI# 570374). Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: Ic0c589bb21e56800090bc0c75a0256a0409efc78 Reviewed-on: https://review.coreboot.org/c/30211 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19soc/intel/cannonlake: Auto turn on HDA controllerLijian Zhao
Update HDAenable bit in Fsp memory init UPD data base on devicetree settings. BUG=N/A TEST=N/A Change-Id: I5159c00a855a2a9516714ccee8ee9933465c5063 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-12-19soc/intel/cannonlake: Declare SATA Mode clearLijian Zhao
FSP support two SATA modes as AHCI mode (0) and RAID mode (1), make it more clear in header file. Change-Id: I1edcadc0048df839da145260b60f9f7720d981fe Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/30093 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-19soc/intel/cannonlake: Add Acoustic featuresLijian Zhao
Expose the following FSP UPD interface into coreboot, which is the following: AcousticNoiseMitigation FastPkgCRampDisableIa FastPkgCRampDisableGt FastPkgCRampDisableSa FastPkgCRampDisableFivr SlowSlewRateForIa SlowSlewRateForGt SlowSlewRateForSa SlowSlewRateForFivr Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I21f53c594a085794474e87eb6781b51db88d0c10 Reviewed-on: https://review.coreboot.org/c/30207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-11-17soc/intel/cannonlake: Add options for pcie ltrLijian Zhao
FSP can support enable/disable Pci express LTR (Latency Tolerance Reporting) mechanism through upd interface. Include that into coreboot side. BUG=N/A TEST=N/A Change-Id: I69b423afa4f81a2d58375734bba07792e08931d5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29642 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-15soc/intel/cannonlake: Make static IRQ mapping for PIC modeSubrata Banik
This patch makes static PIRQ->IRQ mapping, where IRQ10 is mapped to PBRC and IRQ11 is mapped for PARC/PCRC/PDRC/PERC/PFRC/PGRC/PHRC. Change-Id: I8722e34841fe53a4d425202b915ac7838af0d859 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29629 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-13soc/intel/cannonlake: Remove SmbusEnableDuncan Laurie
Remove the SmbusEnable config option from devicetree and instead use the state of the PCI device to determine if it should be enabled or disabled. Change-Id: Id362009e4c8e91699d1ca9bb3c2614e21cfc462a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-11-07mb/{intel/google}: Move CNVi ASL entry from static DSDT to dynamic SSDT ↵Subrata Banik
generation This changes uses drivers/intel/wifi chip for CNVi device to ensure that: 1. Correct device name shows in ACPI name space 2. Correct wake up shows in cat /proc/acpi/wakeup 3. Remove cnvi.asl from soc/intel/cannonlake Change-Id: Ic81de2dce6045ced913766790a40ed19119f5118 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/29399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-17soc/intel/cannonlake: Add CNP PCH-H gpio pin definitionspraveen hodagatta pranesh
- CNL PCH-H has 12 GPIO groups which are grouped under 5 gpio communities. - Add gpio pin definitions for CNP-H and related changes. - Add gpio device name, host software ownership reg offset for CNP-H. BUG: none TEST: build and flash, boot to windows and yocto os on both CFL RVP8 & RVP11 and verify power management, IO device functionalities work fine. Change-Id: I496ec059de125b97c646581bbd3b8bfe6ffa641e Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-09-28soc/intel/cannonlake: Update UPD from device switchLijian Zhao
Some of the FSP silicon UPD entry can be updated base on device switch in pci device tree, have both static config setting and device tree "on" and "off" will be redundant. BUG=N/A TEST=Build and boot up fine with Whiskey Lake RVP platform. Change-Id: Ia36cfab03c4613786e5580a039d89007b630adf9 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27766 Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-09src/soc: Fix typoElyes HAOUAS
Change-Id: I8053d0f0863aa4d93692487f1ca802195c2d475f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-06-22soc/intel/common/block/cpu: Add option to skip coreboot AP initSubrata Banik
SoC users from IOTG team is looking forward for a solution to skip coreboot AP initialization flow and make use of FSPS-UPD to perform AP reset. TEST=Assign use_fsp_mp_init=1 to ensure coreboot is not bringing APs out of reset. Change-Id: Ibc8cd411e802fb682436a933073922b2693ba994 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05soc/intel/cannonlake: Add option to skip coreboot MP initSubrata Banik
This patch provides option for mainboard to skip coreboot MP initialization if required based on use_fsp_mp_init. Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init * 1 = Make use of FSP MP Init Default coreboot does MP initialization for CNL. Change-Id: Ia7da0842996a9db09e6e2b7b201b3a883c3887a2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-05soc/intel/cannonlake: Add VT-d and VMX programmingLijian Zhao
Add FSP option to enable/disable VT-d (Intel Virtualization Technology for Directed I/O) and VMX (Virtual Machine Extensions), VMX will be disabled once VT-d got disabled. Bug=b:73655383 TEST=Build and flash image on meowth board with debug build FSP, in serial log search for "VMXEnable" and "VtdDiable". Change-Id: I589590450aa4b9302ee2f9bb7b879a332f50b73e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-28soc/intel/cannonlake: Limit xDCI feature when VBOOT is enabledDuncan Laurie
Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb. Change-Id: I34e7d750d3f75757a68977ae8d92bfbee1a10af1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-14soc/intel/cannonlake: Add SaGv value definitionLijian Zhao
SaGv(Sytem Agent Dynamic Frequency) have four settings, disabled, disabled but running at fixed lower frequency, disabled but running at fixed middle frquency, disabled but running at fixed high frequency and totally enabled. BUG=None. Change-Id: Ib5fb648179e7889aaa64d91e6cf7a7a7503f4225 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-22soc/intel/cannonlake: Add more HDA Audio Link settingsLijian Zhao
Since FSP version 7.x.11.43, more HDA Audio link options are exposed, so included that into coreboot. Users can modify that base on platform implementations. BUG=None TEST=Boot up with debug build version FSP and check the debug print result on meowth platform. Change-Id: Ib2a75f554ddf9919a62c78a162ec1b9e602f1f5d Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-02-11soc/intel/cannonlake: Add Pch iSCLK programmingLijian Zhao
In order to reduce BOM cost and board area for imaging solution, the sensor requires a 19.2/24MHz reference clock from PCH. In addition to that, having PCH to supply the sensor reference clock will prevent dependency on CPU power management and also avoid level shifter cost. Pch iSCLK is only required for CNP-LP with the camera sensor on the platform. BUG=None TEST=Boot up into OS and read back PCH iSCLK programming through iotools. Change-Id: I28c97a75f2a7f5122a20c8b8f0f2671037a7eca6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23367 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-02-08soc/intel/cannonlake: Add support for EMMC DLL updateLijian Zhao
Add option to have customized DLL setting for EMMC interface to make EMMC able to run at HS400 speed. BUG=None Change-Id: I38bc022d8c05dd1fbd03dc26aa6f33cd249e8248 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-23mainboard/intel/cannonlake_rvp: Add support for SND_MAX98357_DA7219Lijian Zhao
Add NHLT and dt support for Audio with Max98357 and DA7219 TEST=verified NHLT tables and SSDT entries BUG=None Change-Id: If7960eb6bb441f35cbd9a8a6acc37f03e04e3b70 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/22144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-05soc/intel/cannonlake: Correct PMC/GPIO routing informationLijian Zhao
PMC and GPIO DWx definition is not identical, hence update that to correct information. For cannonlake lp PCH, GPIO group C, group E and group GPD is different for PMC GPIO_CFG and GPIO MISCCFG. Also add function call to set up GPE routing in bootblock stage. TEST=Boot up into OS, and manually check PMC GPE status Change-Id: I1edb83edabc72e8a762b129cf51dcd936cd37ddf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2017-12-22ic2/designware: Move Intel i2c logic to shared driverChris Ching
BUG=b:70232394 BRANCH=none TEST=emerge-reef coreboot emerge-glados Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-05soc/intel/cannonlake: Fix DSX_CFG macro name for AC_PRESENTFurquan Shaikh
DSX_CFG provides a config option to disable internal pull-down on AC_PRESENT. This change updates macro name to reflect this correctly. Change-Id: I620d7da4048178f86de41f3afd98543cf8efc5ce Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-04soc/intel/cannonlake: Install common i2cLijian Zhao
Add common i2c support for cannonlake. TEST=N/A Change-Id: I5c60b0579f9e6050308896dcb13dda0bbb724d2b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22238 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-11-01soc/intel/cannonlake: Use SCS common codeBora Guvendik
This patch uses common SCS library to set up sd card. Change-Id: I7978bebaeba3a04fbfd01b3a5e5a37af61d2f4ce Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/21604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Set platform Debug Probe TypeLijian Zhao
Add option for user to select what kind of probe can be used for platform debug. TEST=Set to XDP and boot up system with XDP hooked, able to halt. Change-Id: Ib6add93e3f1c8a646aa625a4cea9be0acecc0487 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21942 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-18soc/intel/cannonlake: Update PCIE CLKREQ programingLijian Zhao
UPD of PCI express clock request was updated in FSP 7.0.14.11, change that in coreboot accordingly. TEST=NONE Change-Id: I2261deccfb489c0de577d580997744a484f07a04 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21878 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-03soc/intel/cannonlake: Add lpc pci driverLijian Zhao
1.Add common ITSS support as part of LPC driver init code. 2.Add LPC pci driver for CNL Change-Id: I6c810fd7158e1498664b77eecae22132e2f6878f Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-20soc/intel/cannonlake: Add PMC pci driversLijian Zhao
Add PMC pci driver on top of PMC common code, also include pmc init code reference from skylake. Change-Id: I95895a3e26cdebd98a4e54720bd4730542707d7e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13soc/intel/cannonlake: Add serialio device configLijian Zhao
Add SerialIO device mode configuration, device mode definition mirrored from FSP. Change-Id: I7009120d69646cf60cb5a622e438ae1eeb6498cf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21411 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-13soc/intel/cannonlake: Add common ACPI support for CNLLijian Zhao
Basic ACPI support for CNL on top of common ACPI, which will establish a root of FADT table, fill MADT entry, create gnvs field, record wake status and convert device names into DSDT dev definitions. Change-Id: Ibc16d2afdd3cb9bad2ecb85cf320c88504409707 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21076 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-30soc/intel/cannonlake: Add PrmrrSize and C6DRAM configSubrata Banik
This patch ensures coreboot can set PRMRR size and C6DRAM enable FSP-M UPDs. Change-Id: I61ec3b6a16e20526516f681ddc3c70755724ed8a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-25soc/intel/cannonlake: Init UPD params based on configPratik Prajapati
Initialize UPD params based upon config Change-Id: Ib2ee58f8432a957ef389b40f717533e4cfe774b9 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21175 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-08-22soc/intel/cannonlake: Define soc_intel_cannonlake_configPratik Prajapati
- Populate soc_intel_cannonlake_config - Add usb.h and vr_config.h for CannonLake Change-Id: I2a6e737594da1e766b157a38942e19a4f7fb9dfa Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/cannonlake: Enable common PMC code for CNLLijian Zhao
This update changes Cannonlake to use the new common PMC code. This will help to reduce code duplication and streamline code bring up. Change-Id: Ia69fee8985e1c39b0e4b104c51439bca1a5493ac Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-17soc/intel/cannonlake: Add SPI flash controller driverLijian Zhao
Add SPI driver code for the SPI flash controller, including both fast_spi and generic_spi. Change-Id: Ie45146721f39d3cec20ff5136adf8925c75da1cd Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.corp-partner.google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-15soc/intel/cannonlake: Call into FSP siliconinitLijian Zhao
The following changes can make system call into FSP siliconinit and exit from that until payloads. 1. Add frame to call fspsinit. 2. Temporarily set all the USB OC pin to 0 to pass FSP siliconinit. This patch was merged too early, and reverted. Originally reviewed on https://review.coreboot.org/#/c/20581 Change-Id: I14eeba575af1658ff8013c9a00bd71013566bcbe Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20687 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-21Revert "soc/intel/cannonlake: Call into FSP siliconinit"Martin Roth
This reverts commit dbe7f893c0e3fffc4e9862d872d65df752feaf9d. This was merged too early. I'll repost it. Change-Id: Ife56f45e91c0b961d0fad0e1872c6df3f9e18973 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20685 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-21soc/intel/cannonlake: Call into FSP siliconinitLijian Zhao
The following changes can make system call into FSP siliconinit and exit from that until payloads. 1. Add frame to call fspsinit. 2. Temporarily set all the USB OC pin to 0 to pass FSP siliconinit. Change-Id: I1c9c35ececf3c28d7a024f10a5d326700cc8ac49 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 18:38:57 +0000