summaryrefslogtreecommitdiff
path: root/src/soc/intel/cannonlake/bootblock
AgeCommit message (Collapse)Author
2018-10-25soc/intel: Consolidate FSP CAR setup and teardown codePraveen hodagatta pranesh
This patch adds following changes, - APL, CFL, DENVERTON soc's using same implementation to setup and teardown FSP CAR. Hence cache_as_ram_fsp.S from soc folder is cosolidated into one file and moved to common code CPU car folder. - exit_car_fsp.S is from APL, DNV soc folder is clubbed into one file and moved to common CPU car. - The new file apollolake/fspcar.c is addded to pass tempraminit parameters. - Coffee lake Soc uses FSPT to support Intel Security features like BootGuard verify boot and Measured boot. Add FSP CAR support for CFL by programming tempraminit parameters and add FSP_T_XIP default if FSP_CAR is selected. BUG= None TEST= Build for both CFL RVP11 & RVP8 and verified for successful CAR setup. Build for both leafhill and harcuvar platform by selecting CONFIG_FSP_CAR without errors. Change-Id: I98d2dd9711ddc0d7ea7d1672fba700259ee3a3a9 Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/29209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-10-17soc/intel/cannonlake: Add new cannon lake PCH-H supportpraveen hodagatta pranesh
Cannon lake PCH-H is added to support coffee lake RVP11 and coffee lake RVP8 platforms. - Add new device IDs for LPC, PCIE, PMC, I2C, UART, SMBUS, XHCI, P2SB, SRAM, AUDIO, CSE0, XDCI, SD, MCH and graphics device. - Add new device IDs to intel common code respectively. - Add CPU, LPC, GD, MCH entry to report_platform.c to identify RVP11 & RVP8. - CNL PCH-H supports 24 pcie root ports and 4 I2C controllers, hence chip.c is modified accordingly. - Add board type UserBd UPD to BOARD_TYPE_DESKTOP for both RVP11 & RVP8. BUG=None TEST=successfully boot both CFL RVP11 & RVP8, verified all the enabled devices are enumerated and cross checked devices ids in serial logs and UEFI shell. Change-Id: I4b6af88d467382250aecb4102878b1c5af92ccd4 Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com> Reviewed-on: https://review.coreboot.org/28718 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-30soc/intel/cannonlake: Update PMC base address for CNP H and LPMaulik V Vaghela
PMC base address is different for CNP LP pch and CNP H pch. Added logic to determine PMC base addrress dynamically based on PCH ID. BUG=none BRANCH=none TEST=Boot Coffeelake U RVP board and check if PMC base address is determined correctly. Change-Id: I833395260e8fb631823bd03192a092df323250fa Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27523 Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-20soc/intel/common/block: Move common uart function to block/uartSubrata Banik
This patch moves uart functions which are common across multiple soc to block/uart. This will remove redundant code copy from soc {skylake/apollolake/cannonlake}. BUG=b:78109109 BRANCH=none TEST=Build and boot on KBL/APL/CNL platform. Change-Id: I109d0e5c942e499cb763bde47cb7d53dfbf5cef6 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-20soc/intel/common/block: Add WHL 2-core SKUKrzysztof Sywula
There are two SKUs of Whiskey Lake W0, 2-core and 4-core. Change-Id: Ia9b2707568702a5fbae3e9495ca53df34613a542 Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com> Reviewed-on: https://review.coreboot.org/28111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-08-10src/soc/intel: Add new device IDs to support coffeelakeMaulik
1. Add new device IDs for SATA, GT and Northbridge to pci_ids.h 2. Add entry to identify CFL U GT and CPU to respective files 3. Add entry to identify CFL U to report_platform.c BUG=none BRANCH=none TEST=Boot to CFL U RVP board with this patch and check if coreboot is able to enumerate various devices and display correct component names properly in serial logs. Change-Id: I47c97fb9eb813587cd655e2bce05a686091619ed Signed-off-by: Maulik <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/27522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2018-08-03soc/intel/cannonlake: Report Whiskey Lake infoLijian Zhao
According to #574725, report Whiskey Lake CPUID, MCH device ID and graphics device ID in bootblock stage. BUG=N/A TEST=Build and boot up whiskey lake rvp platform and check serial log to see proper CPU/MCH/GFX/PCH got recognized. Change-Id: I3fbc190e0520989d2fd4a9b3294e84d67e49b2cf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/27756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2018-07-09src/soc: Use "foo *bar" instead of "foo* bar"Elyes HAOUAS
Change-Id: I21680354f33916b7b4d913f51a842b5d6c2ecef3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-28soc/intel/common/block: Move p2sb common functions into block/p2sbSubrata Banik
This patch cleans soc/intel/{apollolake/cannonlake/skylake} by moving common soc code into common/block/p2sb. BUG=b:78109109 BRANCH=none TEST=Build and boot KBL/CNL/APL platform. Change-Id: Ie9fd933d155b3fcd0d616b41cdf042cefe2c649a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/26132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-14src: Use of device_t is deprecatedElyes HAOUAS
Change-Id: I9cebfc5c77187bd81094031c43ff6df094908417 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27010 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-22bootblock: Allow more timestamps in bootblock_main_with_timestamp()Julius Werner
This patch adds more parameters to bootblock_main_with_timestamp() to give callers the opportunity to add additional timestamps that were recorded in the platform-specific initialization phase. Change-Id: Idf3a0fcf5aee88a33747afc69e055b95bd38750c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-01-26soc/intel/cannonlake: Add Cannonlake D0 support in mpinit and reportLijian Zhao
Both early platform information reporting in bootblock and common code CPU driver will add support for cannonlake D0 stepping processor. BUG=None TEST=Boot up system with D0 stepping CPU installed, check serial log that can display as D0 stepping. Change-Id: I76ee974ee027100d7853a110f95b1601987492e4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/23350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-25soc/intel/cannonlake: enable pch link in bootblockCaveh Jalali
This moves the call to pch_enable_lpc() from romstage to bootblock. In other words, it happens earlier in the boot process. Turns out, we need this to talk to the EC to determine if we're in recovery mode or not. BUG=b:69011806 TEST=boots to linux Change-Id: I899bf343d705fe19a2978917bc88990495ebb5a3 Signed-off-by: Caveh Jalali <caveh@google.com> Reviewed-on: https://review.coreboot.org/23401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-16soc/intel/cannonlake: Program DMI PCR settingsLijian Zhao
According to CNL PCH BIOS spec (570374) 2.4.1, DMI cycle decoding needs to be programmed before it gets locked. Update lpc programming to add decode programming on DMI side as well. Also enabled io port 0x200 decoding by default. BUG=b.70765863 TEST=Apply changes and add chromeos EC decoding in mainboard devicetree.cb, then read back IO port in depthcharge cli and check that return is not zero. Change-Id: I6b8f393c92cbd0632fed86212ae384ff53c9f8c3 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-10soc/intel/cannonlake: Add a call to gspi_early_bar_init in bootblockFurquan Shaikh
This change adds a call to gspi_early_bar_init in bootblock to allocate a temporary BAR for any GSPI buses that are accessed before resource allocation is done in ramstage. Change-Id: I82387a76d20fb272da6271dd9e5bf2c835d5b146 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22781 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-01-09soc/intel/cannonlake: Remove redundent CNL CPUID macrosSubrata Banik
This patch ensures all CannonLake CPUIDs are part of mp_init.h hence remove duplicate macro definitions from SoC code. TEST=Build and boot CannonLake RVP Change-Id: Ibb6a22d5c708248bb53522f906cffb462142b7bf Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/23159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-01-05soc/intel/cannonlake: Correct PMC/GPIO routing informationLijian Zhao
PMC and GPIO DWx definition is not identical, hence update that to correct information. For cannonlake lp PCH, GPIO group C, group E and group GPD is different for PMC GPIO_CFG and GPIO MISCCFG. Also add function call to set up GPE routing in bootblock stage. TEST=Boot up into OS, and manually check PMC GPE status Change-Id: I1edb83edabc72e8a762b129cf51dcd936cd37ddf Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2017-12-08soc/intel/cannonlake: Add PCH ID support in bootblock/report_platform.cSubrata Banik
This patch ensures that all required information for pch/mch/igd deviceid and revision are available in single stage and makes use of local references. TEST=Build and boot cannonlake_rvp to get PCH information as below PCH: device id xxxx (rev xx) is Cannonlake-Y Premium Change-Id: I420e94043145e8a5adcf8bb51239657891915d84 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/cannonlake: Fix HECI error on resetLijian Zhao
Move HECI init from bootblock to romstage, the HECI bar saved by CAR_GLOBAL, which will be lost on different stage. HECI BAR in ramstage will be read back from PCI. Also add fail safe option to reset in case of HECI command not successful. TEST= Force global reset from FSP and read back HECI bar in debug print. Change-Id: I46c4b8db0a80995fa05e92d61357128c2a77de4b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Use EBDA area to store cbmem_top addressSubrata Banik
This patch uses BIOS EBDA area to store relevent details like cbmem top during romstage after MRC init is done. Also provide provision to use the same EBDA data across various stages without reexecuting memory map algorithm. BRANCH=none BUG=b:63974384 TEST=Ensures HW based memmap algorithm is executing once in romstage and store required data into EBDA for other stage to avoid redundant calculation and get cbmem_top start from EBDA area. Change-Id: I763ad8181396ea8d8c0d5cf088264791ba62dceb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-21soc/intel/cannonlake: Enable common PMC code for CNLLijian Zhao
This update changes Cannonlake to use the new common PMC code. This will help to reduce code duplication and streamline code bring up. Change-Id: Ia69fee8985e1c39b0e4b104c51439bca1a5493ac Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-07soc/intel/cannonlake: Add memory map supportLijian Zhao
Calculate the top of ram from output of Fsp reserved memory range. Change-Id: I0dcc8f737c5811c9010cc4a20ea0126ab3f90f14 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/20533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-24Fix files with multiple newlines at the end.Martin Roth
Change-Id: Iaab26033e947cb9cf299faf1ce6d40a90a9facbe Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20704 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-22soc/intel/cannonlake: Keep variable from going out of scopeMartin Roth
The variable p was going out of scope while still being pointed to by *cpu_name. Fix coverity ID 1378215 (Pointer to local outside scope) Change-Id: I6ad7b1919104b4d97869efe5065e39c2a43de638 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2017-07-18soc/intel/cannonlake: Fix Build breakLijian Zhao
1.Replace outdated defination of TCO_EN to TCO_BASE_EN 2.Remove setmaxfreq() as not needed any more. Change-Id: Id54fdfd14f1abaa592132195e6f9acfa5807626e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/20568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13soc/intel/cannonlake: Add bootblock PCHAndrey Petrov
Add essential initialization needed for PCH in bootblock. Change-Id: I3694e099e78c2989f7192c550cbba098e5df2032 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-13soc/intel/cannonlake: Add early CPU initializationAndrey Petrov
Add basic CPU initialization for bootblock, as well as relevant headers. Change-Id: I318b7ea0f3aa5b5d28bf70784ccd20f2fe28cd86 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-12soc/intel/cannonlake: Add report_platform.cAndrey Petrov
Dump basic platform information early in bootblock. Change-Id: I12d1c9dd9f0518c133de465a4db72a0664a94eef Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20068 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-02soc/intel/cannonlake: Add bootblock.cAndrey Petrov
Change-Id: Ia951a466479b1e98e49895705162a66aece7609b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/20065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 13:30:16 +0000