| Age | Commit message (Collapse) | Author |
|---|
|
Macros can be confusing on their own; hiding commas make things worse.
This can sometimes be downright misleading. A "good" example would be
the code in soc/intel/xeon_sp/spr/chip.c:
CHIP_NAME("Intel SapphireRapids-SP").enable_dev = chip_enable_dev,
This appears as CHIP_NAME() being some struct when in fact these are
defining 2 separate members of the same struct.
It was decided to remove this macro altogether, as it does not do
anything special and incurs a maintenance burden.
Change-Id: Iaed6dfb144bddcf5c43634b0c955c19afce388f0
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80239
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Multiple links are unused throughout the tree and make the code more
confusing as an iteration over all busses is needed to get downstream
devices. This also not done consistently e.g. the allocator does not
care about multiple links on busses. A better way of dealing multiple
links below a device is to feature dummy devices with each their
respective bus.
This drops the sconfig capability to declare the same device multiple
times which was previously used to declare multiple links.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iab6fe269faef46ae77ed1ea425440cf5c7dbd49b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78328
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Currently resource allocation starts top down from the default value
0xfe000000. This does not match what ACPI reports, so adapt
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT to reflect that.
Change-Id: I32d08ffd5bbd856b17f7ca2775c5923957d92c85
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The CRAT (Component Resource Attribute Table) isn't used on the APUs
from Renoir on and has also been marked as deprecated in version 6.5 of
the ACPI specification. So remove the 'TODO: look into adding CRAT'
comment from all SoCs from Renoir/Cezanne on.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3ea1e3678608b0ace2a1ff7fc104594e90c91476
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80227
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the acpi_add_fsp_tables implementation is identical for all SoCs,
factor it out and move it to the common AMD FSP code. Also guard the
acpi_add_fsp_tables call in soc_acpi_write_tables with
if (CONFIG(PLATFORM_USES_FSP2_0)) to properly handle the FSP dependency.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8917a346f586e77b3b3278c73aed8cf61f3c9e6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80225
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Factor out acpi_add_fsp_tables from the soc_acpi_write_tables function
and move the remaining parts of the soc_acpi_write_tables function to
the SoC's acpi.c. This aligns the other family 17h/19h SoCs more with
Genoa and only leaves the FSP-specific code in agesa_acpi.c which will
be made common in a following patch. I decided against also renaming
agesa_acpi.c to acpi_fsp.c, since that would have made the diff less
readable and the files get deleted in a following patch anyway.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia87ac0e77c5e673e694703b85a4bab85a34b980e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Factor out the code to add the CRAT ACPI table into a separate file and
add the acpi_add_crat_table function that can then be called from
soc_acpi_write_tables to better isolate all code specific to the CRAT
table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a7853748512811d3d4e124224fcd459e527522c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80223
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI_SCI_IRQ is defined as 9 for all AMD SoCs, so move the definition to
the common amdblocks/acpi.h. Since all but Stoneyridge's soc/acpi.h are
now empty, delete those files too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8210c98dc4cf2c6001d5273d132053278ff7fea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80222
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the definition is the same for all SoCs, move it to the common
amdblock/acpi.h header. Since the Stoneyridge northbridge.c file also
includes this prototype, remove the static attribute of the function
there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib9aa215f2b4ba58f43fed2c751d989f1719e0a17
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80221
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The southbridge_write_acpi_tables function uses a struct device type
parameter, but device/device.h that provides the definition wasn't
included.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5245fa132ec9b84bbc483a31788bcd6fac0736e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
add_agesa_fsp_acpi_table should use the same type for the 'current'
parameter and return value as the calling soc_acpi_write_tables does.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie9f770b1d847ea28e4dbd96298a723d794b91a02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
A pointer to soc_acpi_write_tables gets assigned to the
write_acpi_tables element of the device_operations struct, so make sure
that the function has the expected function signature which in this case
means using unsigned long as type for both the 'current' parameter and
the return value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iee45badb904fa20c6db146edbc00c40ca09361d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80218
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's not the AGESA code that generates most of the ACPI tables, so
rename the function. This also aligns the other SoCs more with Genoa.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b2e6c4cb7139c8bde01b4440ab2e923a1086827
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80217
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the verstage on PSP files in vendorcode from the fsp subdirectory
to a new psp_verstage subdirectory, since those files aren't specific to
the case of the FSP being used for the silicon initialization.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic47f8b18bc515600add7838f4c7afcb4fff7c004
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80209
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Instead of open-coding this functionality in all AMD SoCs, factor it out
into a common implementation.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb65c398b747e70ec67107e0a1d4bd6551501347
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80208
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Call setup_opensil, opensil_entry, and fch_init in the right order from
the init method of the SoC's chip operations. This brings this SoC both
more in line with the other SoCs and avoids using boot state hooks for
this which also makes the sequence in which those functions are called
easier to understand. Previously the boot states were used so that
setup_opensil was run before configure_mpio which was run before
opensil_entry(SIL_TP1), but since configure_mpio is called from
setup_opensil, this is no longer necessary.
TEST=Onyx still boots to the payload and the MPIO configuration reported
from the openSIL code is still the same. The FCH init code now runs
before the resource allocation like on the AMD SoCs that rely on FSP.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic752635da5eaa9e333cfb927836f0d260d2ac049
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79985
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ida6e87908ae6996529057c8df12dbe046ee54b98
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The .inc suffix is confusing to various tools as it's not specific to
Makefiles. This means that editors don't recognize the files, and don't
open them with highlighting and any other specific editor functionality.
This issue is also seen in the release notes generation script where
Makefiles get renamed before running cloc.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie449267fe4fdd75110f577e1b9f748cd06140950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80071
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Move the call into the FSP code to a file in the common AMD FSP code to
isolate the FSP-specific parts of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic8236db7ac80275a65020b7e7a9acce8314c831c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Since the romstage code is very similar between all AMD non-CAR SoCs,
factor out a common romstage implementation. All SoCs that select
SOC_AMD_COMMON_BLOCK_PM_CHIPSET_STATE_SAVE call fill_chipset_state, so
this Kconfig option can be used to determine whether to make that call.
In the FSP case, amd_fsp_early_init gets called, while in the case of an
implementation that doesn't rely on an FSP to do the initialization,
cbmem_initialize_empty gets called to set up CBMEM which otherwise would
be done inside the FSP driver code. Since only some SoCs call
fch_disable_legacy_dma_io again in romstage right after
amd_fsp_early_init, introduce the new
SOC_AMD_COMMON_ROMSTAGE_LEGACY_DMA_FIXUP Kconfig option, so that the
SoCs can specify if this call is needed or not.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a0695714ba08b13a58b12a490da50cb7f5a1ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80083
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move the call into the FSP code to a file in the common AMD FSP code to
isolate the FSP-specific parts of the code and a preparation to make the
romstage of all non-CAR AMD SoCs common. Without isolating the call into
the FSP-M code, building the common romstage would fail for genoa_poc
due to fsp/api.h not being in the include path.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I30cf1bee2ec1a507dc8e61eaf44067663e2505ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
fsp_m_params.c and fsp_s_params.c only contain FSP-specific code, so
only add those to the build if the SOC_AMD_PHOENIX_FSP Kconfig option is
selected. Other files have FSP-specific parts too, but those will be
reworked in future patches.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ife38ca6a548d7c3c2e765d9c9f30e0a4057bb373
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79984
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Split the SOC_AMD_PHOENIX Kconfig option into SOC_AMD_PHOENIX_BASE that
selects the non-FSP-specific options and SOC_AMD_PHOENIX_FSP that
selects both SOC_AMD_PHOENIX_BASE and the FSP-specific options. This
will help to separate the FSP-specific from the FSP-agnostic code. The
mainboards using this SoC now select SOC_AMD_PHOENIX_FSP instead of
SOC_AMD_PHOENIX.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5e95fbfd9d16930ba3e6cc497557d61adba5a6fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79983
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Always use the high-level API region_offset() and region_sz()
functions. This excludes the internal `region.c` code as well
as unit tests. FIT payload support was also skipped, as it
seems it never tried to use the API and would need a bigger
overhaul.
Change-Id: I18f1e37a06783aecde9024c15876b67bfeed70ee
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This reverts commit acbc4912375085a099c2427def464d6e481f2a90.
Reason for revert: CB:79525 fixes the issue that led to the revert
by not maintaining the heap in the SMM-stored copy of ramstage at all.
Change-Id: I3c8ef785486d275c9341859d34fce12253bd2bb9
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80023
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial support for multiple PCI segment groups. Instead of
modifying secondary in the bus struct introduce a new segment_group
struct element and keep existing common code.
Since all platforms currently only use 1 segment this is not a
functional change. On platforms that support more than 1 segment the
segment has to be set when creating the PCI domain.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ied3313c41896362dd989ee2ab1b1bcdced840aa8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The PCIE MMCONFIG base address value and size is updated correctly to
access the PCIE config space registers.
TEST=Verified that PCIE enumeration takes place in boot log
and config space registers are accessible.
Change-Id: Ifa8377df7a2973a88d414c217b5ed114c8ae5cc3
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79832
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The IOHUBS0 is a data fabric component which has a fabric id value
specific to SOC. Updated the fabric id for glinda SOC.
TEST=Verified that fabric ID is programmed correctly in boot logs.
Change-Id: I91ea7d7e7d9b247cf479471df287ba8c96b83d75
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79830
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As a preparation for the multi PCI segment group support, use
acpigen_write_BBN to generate the _SEG method that returns the segment
group number of the PCI root. Until the multi PCI segment group support
is enabled in coreboot, it will always return 0.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2a812dcc564c5319385e9ad482d29b2984a71b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79924
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that Stoneyridge also reports the GNB IOAPIC on the domain and with
the IOMMU_IOAPIC_IDX resource index the common AMD MADT code expects, we
ca switch over to using this common code on Stoneyridge too.
TEST=The resulting MADT doesn't change on Careena
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If4ce71a47827e144c4d4991152101650904901f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Move the GNB IOAPIC resource from being reported in the GNB PCI device
to the domain and use IOMMU_IOAPIC_IDX as resource index, so that the
common AMD MADT code will be able to find the resource.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If6e9aaf4a3fa2c5b0266fd9fb8254285f8555317
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The IOAPIC structure that this function created is for the IOAPIC in the
GNB and not the one in the FCH which is called Kern in this SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6eec02578f2b2e8b8c10dad7eeecff961ef45e76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79883
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the IOMMU_IOAPIC_IDX define from amdblocks/data_fabric.h to
amdblocks/ioapic.h which is both a more logical place for it to be and
this is also a preparation to use the common AMD MADT code for the
Stoneyridge SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaa20e802cf5ed93f0d05842abb1aea0d43b1cac4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79862
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The acpi_fill_madt implementation from the Genoa PoC also works for the
other AMD SoCs that select SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN, so
factor out this function to the common AMD ACPI code and change those
other SoCs to use the new common functionality instead of having their
own implementations.
The old code on the single-domain SoCs used the GNB_IO_APIC_ADDR base
address to create the MADT entry for the additional IOAPIC in the root
complex. The new code iterates over all domains and looks for a resource
with the IOMMU_IOAPIC_IDX index in each domain and if it finds it, it
creates an MADT entry for that IOAPIC. This resource is created earlier
in the boot process when the non-PCI resources are read from the IOHC
registers and reported to the allocator.
TEST=The resulting MADT doesn't change on Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4cc0d3f30b4e6ba29542dcfde84ccac90820d258
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79861
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of open-coding this functionality, call the apm_get_apmc()
helper function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iac6b614d900e51d91a0c155116a5edc29775ea99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
glinda SOC has 24 maximum CPU threads as per PPR documentation(#57254).
TEST=Boot logs print the CPU initialization happens for 24
threads.
Change-Id: Id48a5c62d6156c046daffd2648aeebeee380bd88
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Introduce the HAVE_CONFIGURABLE_APMC_SMI_PORT Kconfig option that when
not selected will result in a default implementation of
pm_acpi_smi_cmd_port to be included in the build that returns APM_CNT.
SoCs that provide their own pm_acpi_smi_cmd_port implementation, need to
select this Kconfig option.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaceb61b0f2a630d7afe2e0780b6a2a9806ea62f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Commit 850b6c6254ab ("soc/amd/picasso: add eMMC MMIO device to
devicetree") broke both S3 resume on Morphius SKUs that use an NVMe SSD
instead of an eMMC and boot on the currently out-of-tree ASRock X370
Killer SLI board. In the latter case, commenting out the
power_off_aoac_device call inside the emmc_enable function fixed things.
TEST=This fixes S3 resume on Morphius with NVMe SSD and an equivalent
change discussed in the patch mentioned above that caused the regression
also fixed boot on the ASRock board.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Change-Id: Id976734c64efe7e0c3d8b073c8009849be291241
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add a Kconfig option to skip powering off the eMMC controller via the
AOAC block in the case where the eMMC controller is disabled in the
devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0dbe819222972d9bf0789671b031ad83648e8917
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79825
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To avoid code duplication and to also bring the mainboards using the
Picasso SoC more in line with Cezanne and newer, factor out the SoC-
specific code from the mainboard's dsdt.asl files to the SoC's soc.asl.
TEST=Timeless builds result in identical images for Bilby, Mandolin, and
Zork/Morphius
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id4ed3a3d3cb55c8b3b474c66a7c1700e24fe908e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Updating from commit id c0cb4bfa:
2023-12-08 signer: sign_android_image.sh should die when image repacking fails
to commit id 7c3b60bb:
2023-10-13 firmware/2lib: Use SSE2 to speed-up Montgomery multiplication
This brings in 3 new commits:
7c3b60bb firmware/2lib: Use SSE2 to speed-up Montgomery multiplication
8bb2f369 firmware: 2load_kernel: Set data_key allow_hwcrypto flag
2b183b58 vboot_reference: open drive rdonly when getting details
6ee22049 sign_official_build: switch from dgst to pkeyutl
da69cf46 Makefile: Add support for make 4.3
Also update the implementations of the vb2ex_hwcrypto_modexp() callback
to match the API changes made in vboot.
Change-Id: Ia6e535f4e49045e24ab005ccd7dcbbcf250f96ac
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
When an if block has curly braces, the corresponding else block should
also have curly braces.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie1979873142469b1482097f9b4db487541a1b7a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Since we have chipset devicetrees for all SoCs that include this code in
the build, we can use the DEV_PTR macro instead of using
pcidev_path_on_root to get the device struct pointer. We can also use
the is_dev_enabled function instead of checking the value of the enabled
element of the device struct directly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5dcd92399e2d3f304352f2170dd3ef8761e86541
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79672
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since we have chipset devicetrees for both SoCs supported by the
Stoneyridge code, we can use the DEV_PTR macro instead of using
pcidev_path_on_root to get the device struct pointer. We can also use
the is_dev_enabled function instead of checking the value of the enabled
element of the device struct directly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifb787750ebc6aa2fef9d3be0e84e6afcffdc2ac1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79671
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5b692aaa2e3f768cc03bca71eff3ceb1a8733ad3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79670
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allow SoC code to set LAPIC access mode to X2APIC
Change-Id: I208cca35c328e1566a57aaaa8ee7809e0760261c
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This updates all warnings currently being printed under the files_added
and build_complete targets to the show_notices target.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia14d790dd377f2892f047059b6d24e5b5c5ea823
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79423
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The openSIL code for the Genoa SoC is only a proof of concept, so change
the name of the Kconfig option to include this code in the build from
SOC_AMD_OPENSIL_GENOA to SOC_AMD_OPENSIL_GENOA_POC to clarify that this
is code that isn't intended or ready to be productized.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If91cdaa7c324426964bba2de2109b6c38482fab8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79574
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Even though this SoC is called 'Genoa', the openSIL implementation and
the corresponding coreboot integration is only a proof of concept that
isn't fully featured, has known limitations and bugs, and is not meant
for or ready to being productized. Adding the proof of concept suffix to
the name should point this out clearly enough so that no potential
customer could infer that this might be a fully functional and supported
implementation which it is not.
Change-Id: Ia459b1e007dcfd8e8710c12e252b2f9a4ae19b72
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77894
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make sure that the APMC SMI command IO port is configured to what
coreboot expects and enable the SMI generation for the APMC SMI command
port.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie4fc259dea125a16556a01b80a3d5e6fb476044a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79531
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
All the resource on the host bridge are fixed resources and therefore
have the IORESOURCE_STORED flag set, so the body of this function which
configures IO or MEM ranges is never reached.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1839f030a4a365e5bc1cdaa3cf37cdf9ca382ff8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79385
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Call fill_fadt_extended_pm_io directly from the SoC's acpi_fill_fadt
functions instead of calling fill_fadt_extended_pm_regs that only calls
fill_fadt_extended_pm_io.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I442bc2801cf74c1d836d3b0d88f281bceb5122b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79529
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ie21bf8d436de19c23ae2176bf8d061564cd5b9cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I0a6eaf43ab6da4bb4a0cc0bbefb5b75c206348f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add the code to configure the FCH IRQ mapping registers and provide the
IRQ name strings for each FCH IRQ mapping configuration register.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I282ae35ebc4d7754121ce4544b782e3cbe7e2256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iadc37f2724a9be43cad1f1934403ebabd5cca245
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79469
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
- DSDT
- MADT
- SSDT CPUs
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0c86694ae83e9e6aa06a50a8a35bf2b24bc8ab65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76530
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the missing parts in soc.asl. Compared to earlier versions of this,
the includes related to S0i3 and DPTC were removed.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I89ecf469e44ca2a3b35c9fcf57c008ff29e7b9bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79468
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the 4 root bridge devices using the ROOT_BRIDGE macro.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If405a90981e5c1fea51935c520800a245473317e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79467
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of including globalnvs.asl in the mainboard's dsdt.asl, include
it in Genoa's soc.asl. This aligns Genoa with Cezanne and newer and also
moves more SoC-common code to the SoC folder.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0e3299a95e007188a4d9de824cfff8d25a778be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79465
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apart from the IOAPIC in the FCH which is handled by amd_lpc_ops,
there's one IOAPIC per PCI root which also needs to be initialized.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I38af5a194062e714827852e95f4e29b45311e517
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
There's no need for the two additional spaces between the tabs and the
'='.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic6824e8c7ee870fc44c5efd70cc05677e9948a9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79464
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I00a567f417b1e22167923fc3193583138718dbbd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79463
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PIRQ_SCI is already defined as 0x10 and this also brings the definitions
more in line with Phoenix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib2ab954b379d2edd0167d7fb229557600cbc4e48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d5efa948e8bd993ca4b5af80f664db687b8a766
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Disable the IOMMU PCI devices in the chipset devicetree. In order for
the IOMMU devices on the Onyx mainboard still be enabled, enable them in
the mainboard devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8c1bbbf370a3b5566a8484bcfa88dc4efa31222b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79409
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the xPRF call to report holes in memory and report those regions as
reserved.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5605499e39931e1a1592318310112666f8a0f144
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Genoa has no XHCI2 controller, so drop this devicetree option.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5b995bb1c0cf0032be25ab215333bc966427f7ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79454
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I22b9b6781f516b96724b67d1321dd71b98e0e0e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Drive board specific USB configuration from the coreboot devicetree into
the opensil input block.
Add USB OC pins to chipset.cb
In the process of scrubbing opensil for public release USB became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I506547a7abbb643d3e982e44a92f33b45cd739e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Enable the dummy function 0 that don't have an alias in the chipset
devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I607245c587a544007fd714f64901cbb50014612f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Return the PCI segment group number from data_fabric_get_pci_bus_numbers
via pointer argument so that amd_pci_domain_scan_bus can handle the PCI
segment group numbers once coreboot supports more than one PCI segment
group. For now, just print an error and return if the buses are on a PCI
segment group other than 0.
TEST=Mandolin still boots
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia53cda0ba656201c2197d05bc0d4a8fbbe8ad5d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
CLKREQ programming as currently implemented is completely dependent on
FSP DXIO descriptors, so move under common/fsp/pci and rename the
Kconfig to reflect the move.
TEST=build google/{guybrush, skyrim, myst}
Change-Id: I87b53d092ddc367b134c25949f9da7670a6a1d88
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Function 0 of the devices that have the bridges to other buses are dummy
functions that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on those devices isn't
enabled. Those dummy device functions are however not PCI host bridges,
so change the comments from 'Dummy Host Bridge' to 'Dummy device
function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: Ibddfdf558d84bc44434d718b86f41bd06044b22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add defaults for the CONSOLE_UART_BASE_ADDRESS Kconfig symbol so that
the SeaBIOS payload will know where the MMIO address of the UART is to
build successfully without any additional user input during the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia05c3531cdbf3fd3e2e5f81b9d652f9dfef2111a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79395
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Dump the DBG2 table on Linux console.
$> acpidump -s
ACPI: DBG2 0x0000000000000000 000054 (v00 COREv4 COREBOOT 00000000 **)
$> acpidump > acpidump.bin
$> acpixtract -a acpidump.bin
$> iasl -d dbg2.dat
$> cat dbg2.dsl
/*
* ACPI Data Table [DBG2]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "DBG2" [Debug Port table type 2]
[004h 0004 4] Table Length : 00000054
[008h 0008 1] Revision : 00
[009h 0009 1] Checksum : FA
[00Ah 0010 6] Oem ID : "COREv4"
[010h 0016 8] Oem Table ID : "COREBOOT"
[018h 0024 4] Oem Revision : 00000000
[01Ch 0028 4] Asl Compiler ID : "CORE"
[020h 0032 4] Asl Compiler Revision : 20220331
[024h 0036 4] Info Offset : 0000002C
[028h 0040 4] Info Count : 00000001
[02Ch 0044 1] Revision : 00
[02Dh 0045 2] Length : 0028
[02Fh 0047 1] Register Count : 01
[030h 0048 2] Namepath Length : 0002
[032h 0050 2] Namepath Offset : 0026
[034h 0052 2] OEM Data Length : 0000 [Optional field not present]
[036h 0054 2] OEM Data Offset : 0000 [Optional field not present]
[038h 0056 2] Port Type : 8000
[03Ah 0058 2] Port Subtype : 0012
[03Ch 0060 2] Reserved : 0000
[03Eh 0062 2] Base Address Offset : 0016
[040h 0064 2] Address Size Offset : 0022
[042h 006612] Base Address Register : [Generic Address Structure]
[042h 0066 1] Space ID : 00 [SystemMemory]
[043h 0067 1] Bit Width : 00
[044h 0068 1] Bit Offset : 00
[045h 0069 1] Encoded Access Width : 03 [DWord Access:32]
[046h 0070 8] Address : 00000000FEDC9000
[04Eh 0078 4] Address Size : 00000100
[052h 0082 2] Namepath : "."
Raw Table Data: Length 84 (0x54)
00: 44 42 47 32 54 00 00 00 00 FA 43 4F 52 45 76 34 // DBG2T.....COREv4
10: 43 4F 52 45 42 4F 4F 54 00 00 00 00 43 4F 52 45 // COREBOOT....CORE
20: 31 03 22 20 2C 00 00 00 01 00 00 00 00 28 00 01 // 1." ,........(..
30: 02 00 26 00 00 00 00 00 00 80 12 00 00 00 16 00 // ..&.............
40: 22 00 00 00 00 03 00 90 DC FE 00 00 00 00 00 01 // "...............
50: 00 00 2E 00 // ....
BUG=b:303689867
Change-Id: I3c97a78d1889549421baf0bc1a2e8f959a0f47e2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79174
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The only thing romstage needs to do is find cbmem_top.
TESTED: reaches ramstage.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic2837c4a2b0ec8dcd9dd99602f9c073999c36139
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76514
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Select PSP_VERSTAGE_MAP_ENTIRE_SPIROM in Cezanne Kconfig instead of
common Kconfig.
BUG=None
TEST=Build BIOS image and boot to OS in dewatt.
Change-Id: I476971700824fed06d17000001afc075105fa1ee
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79306
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Earlier entire SPI ROM was mapped to memory. With limited TLB resources
in PSP, this approach hit the limit on systems using 32 MiB SPI ROM.
Therefore regions in SPI ROM were mapped on need basis. This works well
on Picasso, Mendocino and Phoenix SoCs. But unfortunately this causes
boot hangs in Cezanne SoC. Add a configuration to map the entire SPI ROM
and enable it in Cezanne SoC. For other SoCs, keep the configuration
disabled so that only the required SPI ROM region is mapped.
BUG=b:309690716
TEST=Build and boot to OS in both Dewatt and Skyrim.
Change-Id: I166ac7b50b367c067e1a743fc94686e69dd07844
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Select opensil & opensil_genoa. This enables openSIL for Genoa, allowing
the build to be tested.
Change-Id: I18379f311a56ff3f8b68d3c9a07a4f59de2d90b2
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
This follows commit c79e96b4eb3 which did the rename across the tree
except in these places. Remove the flag from CHROMEOS abuild builds
because it never really belonged there.
Change-Id: If98fa27f64d6b676d3edf68ba6fbaacf7ac422e4
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79258
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Also update the regular expression to find the genoa blobs.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Iba0109c049019a22cba1e0358cedbd9c198c6569
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The Genoa SoC has 6 I2C controllers. In order to support those, select
SOC_AMD_COMMON_BLOCK_I2C and implement the SoC-specific functions and
data structures needed by the common AMD I2C code. Since the common AMD
I2C code also reports if the controller is enabled or not in the SSDT,
change the corresponding DSDT code to use this information. In this
patch the I2C pad control registers don't get configured by coreboot yet
and we rely on ABL already having those set up correctly which seems to
be an assumption that the reference firmware is making too. PPR #55901
Rev 0.26 was used as a reference for the I2C controllers and the GPIO
pins being used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iebc10de6ea5c6d441cff04e016dcec62405078c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
This patch adds asl code for MMIO device like I2C, UART, GPIO etc.
Change-Id: Ic5bc2cc0141e9da7e2c6ed7691188d7c94b6b1e3
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>t show
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78895
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses AMD SoC common code for MCA and adds MCA bank
information as per Genoa Processor Programming Reference (PPR)
version 0.25 (#55901) and uses AMD SoC common code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If728d803d600f7e86507cd1b35b40022bf4d379e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76524
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All CPUs properly come out of reset and relocate SMM.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I8c2d976addacd5a2ba70eb629510128853b9f847
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Default value of HEAP_SIZE is 0x100000, since genoa has a lot of
CPU increase the HEAP_SIZE to 0x200000
Change-Id: Idd707200fe72730849267cd3cafc40e44f1f8c5d
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Rename AZALIA_PLUGIN_SUPPORT to AZALIA_HDA_CODEC_SUPPORT and add a help
text to this Kconfig option to clarify what this option is about.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71e36869c6ebf77f43ca78f5e451aebfb59f1c74
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78986
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
There's no reason to name this choice block. Remove the name.
Change-Id: Iebf8b1e7af928b988ab514d9dd85d2e70bf00c09
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78917
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop the hda_soc_ssdt_quirks function since it doesn't apply for any of
the SoCs supported by the Stoneyridge code which was the only SoC
implementing it. This code was added when commit 91a7abf25c72
("soc/amd/hda: Move HDA PCI device from DSDT to SSDT") rewrote the code
originally added in commit 1587dc8a2b4d ("soc/amd/stoneyridge: Add
northbridge support") as a copy from northbridge/amd/pi/00670F00. This
code was moved around in commit 6580408a7e0a ("amd/pi/hudson: Move audio
to northbridge"), since the HDA controller was moved from the FCH to the
northbridge complex. When the controller was moved, the PCI config space
interface also changed, so those bits are no longer the DisableNoSnoop,
DisableNoSnoopOverride, and EnableNoSnoopRequest bits of the Misc
Control register of the HDA controller, but some bits within the
ClassCodeW field of the ACGAZ Mirrot Reg Ctrl 0 register.
BKDG #55072 Rev 3.04 (Stoneyridge), BKDG #50742 Rev 3.08 (family 15h
model 60h-6fh / 00670F00), and BKDG #52740 Rev 3.05 (family 16h model
30h-3fh) were used as a reference. Only the SoC with BKDG #52740 still
has the HDA controller in the FCH; the other two have it in the
northbridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I77fc76752b1c7de62ba8a196f15c198f55be3074
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78940
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 44a48ce7a46c36df69f7b2cf3552bf10fa5f61b6.
Reason for revert: It breaks wakeup from suspend on a bunch of boards.
While this approach of eyeballing "correct" values by chipset _should_
be fixed, it should also be accompanied by compile time verification
that the memory map works out.
Since nobody seems to care enough, let's just revert this, instead of
keeping the tree broken for a bunch of configurations.
Change-Id: I3cd73b6ce8b15f06d3480a03ab472dcd444d7ccc
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78850
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9fc155fe76c05fefd4ce31ae6b96dcc4527b6abc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0eae9e4d246bd07f43b1d77e5ad7649c010d0efe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8dc93b12b81abee41f6f225f41d1f9953d1d93e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78898
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
All base addresses of MMIO devices in the devicetree should also have
corresponding defines in iomap.h. PPR #55901 Rev 0.26 was used as a
reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0444e6cc0587b484a4a1ff49fa4b1540a24c8e80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78897
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The base addresses of I2C 5 and I3C 3 were wrong and all I3C controllers
should use the base address of the 4kiB block where all registers of
that I3C controller are located in. PPR #55901 Rev 0.26 was used as a
reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1c983d4a709000ef7963b96228322603b98728aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Indicate FSP has support to display logo when graphics initialization is
done in FSP.
BUG=b:294055390
TEST=Build and boot to OS in Skyrim with and without passing the BMP
logo buffer from coreboot.
Change-Id: I6112c03723dcbc34cb0f57c400f831c765b95115
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78882
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit e728766f4596 ("soc/amd/mendocino: Do not load MP2 Firmware when
in RO") added logic to ensure that the MP2 disable soft fuse bit was set
for the RO section, but failed to check if the bit was already set
otherwise (as it is for non-ChromeOS builds). This caused the bit to
appear twice in the PSP_RO_SOFTFUSE_BITS string, and when the string
was converted to a series of numeric values and added together, bit
(n+1) ended up being set instead of bit n.
To mitigate this, use the makefile sort() function to ensure the
PSP_[RO_]SOFTFUSE_BITS string does not contain any duplicates before
the bitmask is calculated. Apply this to all AMD SoC makefiles where
the softfuse bits are added.
TEST=build/boot google/skyrim (frostflow). Use a verbose build (V=1)
to verify that the correct soft fuse value is passed to amdfwtool for
RO and RW_A/B for both ChromeOS and non-ChromeOS builds.
Change-Id: I2e207e20132d44016fbcb986bdfd8e935d8fead5
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78823
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
A new FSP-S UPD is added to allow passing a buffer containing boot logo
in BMP format. Update the FSP-S UPD and add a SoC specific callback to
populate the UPD.
BUG=b:294055390
TEST=Build and boot to OS in Skyrim. Pass the BMP logo buffer through
the UPD to FSP-S. Ensure that the concerned driver in FSP-S handles the
buffer.
Change-Id: Ie522956b6dfe2400ef91d43c80f2adc6d52c8415
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78817
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I think this was probably a cut & paste error. We don't want prompts
for the "default" Kconfig options. Those should be set by the platform,
not the end user. These prompts didn't make sense where they were in the
Kconfig menus either.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Idcd2ba84591d31a9a25bcc6cae3ec163939d7836
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
