summaryrefslogtreecommitdiff
path: root/src/soc/amd
AgeCommit message (Collapse)Author
2021-11-08soc/amd/picasso/include/southbridge: drop unused aoac_devs structFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ida8d767a5b56bdf59747362ddf68372436573895 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58972 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-08soc/amd/cezanne: Add ASYNC_FILE_LOADINGRaul E Rangel
This gives us a knob that can be controlled via a .config to enable/disable file preloading. I left the option disabled because there is currently a race condition that can cause data corruption when using the SPI DMA controller. The fix will actually introduce a boot time regression because the preloads are happening at the same time as the elog init. I want to keep preloading disabled for now until I get all the sequencing worked out. BUG=b:179699789 TEST=Boot guybrush and verify no preloading happens. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie839e54fa38b81a5d18715f190c0c92467bd9371 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-05soc/amd/*/include/smi: move NUMBER_SMITYPES definition to the topFelix Held
Since all other defines for the number of certain things are at the top of the file, move NUMBER_SMITYPES there as well to keep things consistent. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idfb599531d6cc382ab258bd1eae89e7b35fa9e79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-05soc/amd/*/include/smi: fix off-by-one in SCIMAPS definesFelix Held
SCIMAPS is the total number of SCI to GEVENT mappings. configure_scimap returns early when the scimap is greater or equal than SCIMAPS, so for SMITYPE_ACDC_TIMER it returned early without doing what was expected from it to do despite that being a valid value, so fix this off-by-one. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibaf8c5618ddbf0b8d4cd612a7f1347d8562bbfcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-04soc/amd/common/block/spi: Add prompt to SOC_AMD_COMMON_BLOCK_SPI_DEBUGRaul E Rangel
Makes it so I can enable SPI debugging without modifying the source. BUG=b:179699789 TEST=Add CONFIG_SOC_AMD_COMMON_BLOCK_SPI_DEBUG=y to my .config Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie3815e0398b5268874039196a625fc29dd3dc3d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04Kconfig,soc/amd/cezanne: Make COOP_MULTITASKING select TIMER_QUEUERaul E Rangel
This reduces the number of selects required in the SOC_SPECIFIC_OPTIONS. BUG=b:179699789 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7f1364fc269ea5ec17982bf750a164a3290adb0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04soc/amd/common/block/lpc: Set CBFS_CACHE_ALIGN to 64 when using SPI DMARaul E Rangel
AMD platforms require the destination buffer to be 64 byte aligned when using the SPI DMA controller. BUG=b:179699789 TEST=gdb -ex 'p cbfs_cache' /tmp/coreboot/guybrush/cbfs/fallback/ramstage.debug $1 = {buf = 0x0, size = 0, alignment = 64, last_alloc = 0x0, second_to_last_alloc = 0x0, free_offset = 0} Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I228372ff19f958c8e9cf5e51dcc3d37d9f92abec Reviewed-on: https://review.coreboot.org/c/coreboot/+/58707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-04amd/i2c: Remove the weak functionZheng Bao
BUG=b:140165023 Change-Id: Ieedd6c9f3abeed9839892e5d07127862cd47d57f Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04soc/amd/cezanne/include/gpio: fix GPIO 106 native function namesFelix Held
The name looked a bit odd and the Cezanne PPR #56569 Rev 3.03 confirmed that the native function names don't have the EMMC_ prefix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I917c74afd98f2e2133e160d352f11f08c19a3ec6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-04soc/amd/cezanne/include/cppc: use AMD_CEZANNE_CPPC_H as include guardFelix Held
This makes this header file consistent with the rest. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ice2872b4a24032d3a65777795943602cd2595de7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03soc/amd/cezanne/include/aoac_defs: drop leading newlineFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8458fbee7edd19117a207f39ac8f9575b1374fbc Reviewed-on: https://review.coreboot.org/c/coreboot/+/58863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03soc/amd/cezanne/include: replace PICASSO with CEZANNE in include guardsFelix Held
Somehow missed renaming those when creating the coreboot support for Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I13c28f67d32ba987987cfc2b45e248d535ccdca9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03soc/amd/*/cpu: handle mp_init_with_smm failureFelix Held
When the mp_init_with_smm call returns a failure, coreboot can't just continue with the initialization and boot process due to the system being in a bad state. Ignoring the failure here would just cause the boot process failing elsewhere where it may not be obvious that the failed multi-processor initialization step was the root cause of that. I'm not 100% sure if calling do_cold_reset or calling die_with_post_code is the better option here. Calling do_cold_reset likely here would likely result in a boot-failure loop, so I call die_with_post_code here. BUG=b:193809448 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifeadffb3bae749c4bbd7ad2f3f395201e67d9e28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03cpu/amd/mtrr: Remove topmem global variablesArthur Heymans
The comments are not correct anymore. With AGESA there is no need to synchronize TOM_MEMx msr's between AP's. It's also not the best place to do so anyway. Change-Id: Iecbe1553035680b7c3780338070b852606d74d15 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-03cpu/x86/Kconfig: Remove unused CPU_ADDR_BITSArthur Heymans
Change-Id: I88f62c18b814ac0ddd356944359e727d6e3bba5a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
2021-11-03soc/amd/stoneyridge/cpu: remove unneeded line break in get_cpu_countFelix Held
The line length is no longer limited to 80 characters, so there's no need for that line break any more. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7a8fb472f00e039f25a71ee526a3dd0bc6c754f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-02include/device/pci_ids,soc/amd/common/block/lpc: drop duplicate PCI IDsFelix Held
PCI_DEVICE_ID_AMD_FAM17H_LPC and PCI_DEVICE_ID_AMD_FAM17H_SMBUS redefine the same values that are already defined by PCI_DEVICE_ID_AMD_CZ_LPC and PCI_DEVICE_ID_AMD_CZ_SMBUS, so drop PCI_DEVICE_ID_AMD_FAM17H_LPC and PCI_DEVICE_ID_AMD_FAM17H_SMBUS. Also add some comments to the places in the code where the defines are used to clarify which ID is used on which hardware generation. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id0b3d7b5a886ccc76d82ada6be4145e85fd51ede Reviewed-on: https://review.coreboot.org/c/coreboot/+/58696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-02soc/amd/common/block/cpu: Add support for cbfs_cache regionRaul E Rangel
This change adds the cbfs_cache region into the x86 memlayout. The SoC or mainboard can decide how big the region should be by specifying CBFS_CACHE_SIZE. BUG=b:179699789 TEST=Build guybrush and verify cbfs_cache region wasn't added. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I268b6bc10906932ee94f795684a28cfac247a68c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-02psp_verstage: convert relative address in EFS2Kangheui Won
Addresses in AMD fw table with EFS gen2 are relative addresses, but PSP doesn't accept relative addresses in update_psp_bios_dir(). Check for EFS gen2 and convert them as needed. BUG=b:194263115 TEST=build and boot on guybrush and shuboz Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I95813beba7278480e6640599fcf7445923259361 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-02lib: Add new argument as `ddr_type` to smbios_bus_width_to_spd_width()Subrata Banik
Add DDR5 and LPDDR5 memory type checks while calculating bus width extension (in bits). Additionally, update all caller functions of smbios_bus_width_to_spd_width() to pass `MemoryType` as argument. Update `test_smbios_bus_width_to_spd_width()` to accommodate different memory types. Create new macro to fix incorrect bus width reporting on platform with DDR5 and LPDDR5 memory. With this code changes, on DDR5 system with 2 Ch per DIMM, 32 bit primary bus width per Ch showed the Total width as: Handle 0x000F, DMI type 17, 40 bytes Memory Device Array Handle: 0x0009 Error Information Handle: Not Provided Total Width: 80 bits Data Width: 64 bits Size: 16 GB ... BUG=b:194659789 Tested=On Alder Lake DDR5 RVP, SMBIOS type 17 shows expected `Total Width`. Change-Id: I79ec64c9d522a34cb44b3f575725571823048380 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-01amd/lpc: Remove the weak functionZheng Bao
BUG=b:140165023 Change-Id: Idb4613dc08c8dee6c92b4dabb39c2f5c189471aa Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-27soc/amd/common/block/graphics: add missing GPU PCI IDsFelix Held
Since the iGPU PCI device IDs for AMD Renoir (family 17h, model 60h) and Lucienne (family 17h, model 68h) are already defined in pci_ids.h, also add them to the pci_device_ids list in the common AMD graphics support block. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1c554d21eece182ecea7b09b45b7aa8a733425d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26soc/*/Makefile: don't add cpu/x86/cacheFelix Held
No SoC uses the ramstage-only x86_enable_cache helper function to call enable_cache with some added port 0x80 and console output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: I7c5039e1341fd4089078ad7ffb2fe6584a94045c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-25soc/amd/common/block/lpc/Makefile: simplify handling spi_dma.cFelix Held
Use the verstage_x86 class for the spi_dma.c target instead of using the verstage class and guarding it with !VBOOT_STARTS_BEFORE_BOOTBLOCK. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9b8cafd1ef17df8c485f6594bc0928cea88e436b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-25cpu,soc/amd/*/Makefile: don't add cpu/x86/pae a second timeFelix Held
Since cpu/x86/Makefile.inc already adds the pae sub-directory, there is no need to include it in the Makefile of a CPU or SoC, so remove it from those Makefiles. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I78368f7eb880fb64f511a2fa8c8acde222d0dca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-22soc/amd/cezanne,picasso/chipset.cb: drop LAPIC deviceFelix Held
After adding code to handle the case of missing the link/bus on the CPU cluster device in mp_cpu_bus_init, there's no need to have the LAPIC device in the devicetree any more. TEST=Mandolin still boots successfully. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icfc4fb61b373129f3bf4f4de09c38076a8f66733 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22arch/x86/ioapic: Select IOAPIC with SMPKyösti Mälkki
For coreboot proper, I/O APIC programming is not really required, except for the APIC ID field. We generally do not guard the related set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC). In practice it's something one cannot leave unselected, but maintain the Kconfig for the time being. Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: move printing of failure message into mp_init_with_smmFelix Held
Each CPU/SoC checks the return value of the mp_init_with_smm and prints the same error message if it wasn't successful, so move this check and printk to mp_init_with_smm. For this the original mp_init_with_smm function gets renamed to do_mp_init_with_smm and a new mp_init_with_smm function is created which then calls do_mp_init_with_smm, prints the error if it didn't return CB_SUCCESS and passes the return value of do_mp_init_with_smm to its caller. Since no CPU/SoC code handles a mp_init_with_smm failure apart from printing a message, also add a comment at the mp_init_with_smm call sites that the code might want to handle a failure. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I181602723c204f3e43eb43302921adf7a88c81ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/58498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-22cpu/x86/mp_init: use cb_err as status return type in remaining functionsFelix Held
Using cb_err as return type of mp_run_on_aps, mp_run_on_all_aps, mp_run_on_all_cpus and mp_park_aps clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of all 4 functions listed above against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4b3f03415a041d3ec9cd0e102980e53868b004b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-21soc/amd/common/block/cpu/smm/finalize: simplify finalize_coresFelix Held
The local variable int r isn't needed, so remove it. This is a preparation to change the return type of mp_run_on_all_cpus from int to enum cb_err which will be done in a follow-up patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie4c454cbfcc581be41ea3463ea6f852a72886128 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-21cpu/x86/mp_init: use cb_err as mp_init_with_smm return typeFelix Held
Using cb_err as return type clarifies the meaning of the different return values. This patch also adds the types.h include that provides the definition of the cb_err enum and checks the return value of mp_init_with_smm against the enum values instead of either checking if it's non-zero or less than zero to handle the error case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibcd4a9a63cc87fe176ba885ced0f00832587d492 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-21acpigen,soc/amd,cpu/intel: rework static DWORD for CPPC tableMichael Niewöhner
Some elements in the ACPI CPPC table allow static DWORDs. Instead of using a fake register resource, use a tagged union with the two types "register" and "DWORD" and respective macros for CPPC table entries. Test: dumped SSDT before and after do not differ. Change-Id: Ib853261b5c0ea87ae2424fed188f2d1872be9a06 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-20soc/amd/common/block/cpu: Remove magic number in memlayoutRaul E Rangel
The SPI DMA controller can only perform transactions on a cache line boundary. This change removes the magic number and uses the #define to make it clear. BUG=b:179699789 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie7b851dc2433e44a23224c3ff733fdea5fbcca0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-20psp_verstage: remove psp_ef_table structKangheui Won
psp_efs.h now has embedded_firmware struct which is copied from amdfwtool. Remove psp_ef_table from psp_verstage and use it instead to remove duplicates. TEST=boot on zork and guybrush Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: Ia362445cb7fc565b2d963f264461d833dc0338d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-19acpi/acpigen: Constify CST functions' pointersAngel Pons
The `acpigen_write_CST_package` and `acpigen_write_CST_package_entry` functions don't modify the provided C-state information. So, make the pointer parameters read-only to enforce this. Also constify arguments where possible. Change-Id: I9e18d82ee6c16e4435b8fad6d467e58c33194cf4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-19soc/amd/common/block/include/psp_efs: don't typedef structFelix Held
Don't use a typedef for the embedded_firmware struct so that it's clearer that this is a struct. TEST=Timeless build for google/guybrush results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I97a02c350af57c8f58014aaf7dda8b4796905ff3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-10-19soc/amd/common/block/include/psp_efs: rename embedded_firmware elementsFelix Held
The element at offset 0x14 in the embedded_firmware struct is the pointer to the combo PSP directory header, so rename it from comboable to combo_psp_directory to clarify that this is not a flag, but a pointer to a data structure. Also rename psp_entry to psp_directory since it points to the PSP directory table. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia70e97f10f4fa0ac63cc65a33ecdc956538482b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-10-18ACPI: Have common acpi_fill_mcfg()Kyösti Mälkki
As long as there is only one PCI segment we do not need more complicated MCFG generation. Change-Id: Ic2a8e84383883039bb7f994227e2e425366f9e13 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-10-16soc/amd/stoneyridge/include/iomap: rename I2C[ABCD]_BASE_ADDRESS definesFelix Held
Picasso and Cezanne define and use APU_I2C[01234]_BASE for the base addresses of the I2C controllers, so align Stoneyridge with this. The ACPI device names aren't changed from I2C[ABCD] to I2C[0123] for now since this might change behavior in the OS and would also change the resulting binary of a timeless build. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9c400c073eba5c14bd35703b717f75df89a8719d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58370 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15soc/amd/common: move configure_espi_with_mb_hook implementationFelix Held
Move the actual implementation of configure_espi_with_mb_hook out of the header file and into the espi_util.c file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1106e69a52bf329a41e8e12fd09db846310b102a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd: make configure_espi_with_mb_hook call conditionalFelix Held
If a system doesn't use eSPI or has the eSPI interface already configured in verstage on PSP, not calling configure_espi_with_mb_hook from fch_pre_init makes it a bit more obvious that the eSPI interface initialization will be skipped. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia77b83d56a5dab1bac6cfbbd92d33aa60a9e8b89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/common/include/espi: rename configure_espiFelix Held
Rename configure_espi to configure_espi_with_mb_hook to clarify that this function will call into the mb_set_up_early_espi function in the mainboard-specific code if it exists. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5d0f099288b0100242629c736dd69a8add977b5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/stoneyridge/acpi/sb_fch: use I2C[ABCD]_BASE_ADDRESS definesFelix Held
Now that the I2C[ABCD]_BASE_ADDRESS defines aren't macros that calculate the MMIO addresses any more, those defines can also be used in the ACPI code. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7de2f83dc2f8061d8f1735caf10314bcddb2d3fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/58337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/stoneyridge/include/iomap: drop I2C_BUS_ADDRESS(x) macroFelix Held
The I2C_BUS_ADDRESS(x) macro isn't used to iterate over the I2C controller base addresses, so drop this and use the fixed MMIO address for the I2C[ABCD]_BASE_ADDRESS defines instead which also allows using those defines in the ACPI code. TEST=Timeless build results in identical image for Google/Treeya. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idd7484a0322dc5167cbb7fdcd9a2583f0dbed50e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/common/block/i2c: implement proper read_resourceFelix Held
Before this patch the reservation of the MMIO region of the I2C controllers was done in the LPC controller PCI device despite the I2C controllers already being devices in the devicetree. This patch implements this functionality as read_resources function of the I2C device instead. This will only reserve the memory when the I2C devices are enabled in devicetree which is a change from the previous behavior. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I67c853df3be2f593ecfa113ae2f74e5df7cf74e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58307 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-15soc/amd/cezanne,picasso/uart: implement read_resourceFelix Held
Implement the read_resources function for the UART devices so that the resource allocator knows about their fixed MMIO resources when enabled. TEST=UART still works on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4ffddee3f5f4281aca98ddfcefa639dfb7a38dae Reviewed-on: https://review.coreboot.org/c/coreboot/+/58306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-15soc/amd/common/block/lpc: simplify eSPI part of MakefileFelix Held
Since espi_util.c is also built in the case of verstage on PSP, we can just add it to all stages. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I65e07c356aac73c5de2d9ce5582434872a223c19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-14soc/amd/common/acpi/upep: Add Low Power State Entry NotificationsKarthikeyan Ramasubramanian
Add support to handle S0ix entry and exit notifications by adding the corresponding _DSM functions. The function indices are chosen based on the Modern Standby BIOS Implementation Guide 56358 Rev. 1.04. Inside the notification functions perform any mainboard specific S0ix entry and exit actions. BUG=b:195748540 TEST=Build and boot to OS in Guybrush. Ensure that the notification functions are invoked on S0ix entry and exit. Perform suspend/resume cycles for multiple iterations. Change-Id: I3014551f6e281d466628559453a0141a3dd6abad Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58274 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-10-13src/soc/amd/cezanne: enable clock gatingJulian Schroeder
Enabling clock gating for CGPLL to lower power consumption in S3 and S0i3 states. See also: Cezanne PPR chapter 7, rev 3.03. BUG=b:185273565 TEST=iotools mmio_read32 0xfed80e2c and 0e30 show clk gating enabled and suspend_stress_test works. Change-Id: I33cbdeec62e49db90b680da37e5028df03a9c015 Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58279 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/amd/common/block/spi: Support fast speed overrideKarthikeyan Ramasubramanian
Add support to override SPI ROM fast speed based on board version. This will allow boards to start at lower speeds during bringup and then switch to higher speeds after assessing the signal integrity. Also implement a default no-op override. BUG=None TEST=Build and boot to OS in Guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ia8ff3b3bdb53fee142527ae63aa7785945909304 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/amd/common: Add support to read and set SPI speeds from verstageKarthikeyan Ramasubramanian
Currently all SPI speed configurations are done through EFS at build time. There is a need to apply SPI speed overrides at run-time - eg. based on board version after assessing the signal integrity. This override configuration can be carried out by PSP verstage and bootblock. Export the APIs to set and read SPI speeds from both PSP verstage and bootblock. BUG=None TEST=Build and boot to OS in guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I281531e506b56173471b918c746f58d1ad97162c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/amd/common/block/espi_util: Refactor eSPI SetupKarthikeyan Ramasubramanian
eSPI is setup in two different locations in bootblock depending on early port80 routing configuration. Also eSPI is setup in PSP, if verified boot starts before bootblock. Consolidate all the scenarios by initializating eSPI very early in fch_pre_init if verified boot starts after bootblock and eSPI is enabled. BUG=None TEST=Build and boot to OS in Guybrush. Perform S5->S0, G3->S0, warm reset and suspend/resume cycles for 50 iterations each. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Icfeba17dae0a964c9ca73686e29c18d965589934 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/amd/*: Enable ACPIMMIO decode first in fch_pre_initFelix Held
Since the GPIO mux/control MMIO regions are within the ACPIMMIO region, we need to call enable_acpimmio_decode_pm04 here first so that accessing the GPIO registers will work. BUG=None TEST=Build and boot to OS in Guybrush. Change-Id: I4bc076261c72cf999a5f2464b74cff6bf694d473 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-13soc/amd/cezanne,soc/intel/common: rework CPPC table generationMichael Niewöhner
Make use of the newly introduced ACPI macros for CPPC table generation that currently exists of a bunch of confusing assignments of structs that only get partially filled. Test: dumped SSDT before and after do not differ. Change-Id: I844d191b1134b98e409240ede71e2751e51e2159 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lance Zhao Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-10-12soc/amd/common/block/include/psp_efs: use unsigned type for bitfieldFelix Held
For 1 bit long bit fields an unsigned type should be used. In this case uint32_t is used instead of a generic unsigned int for both consistency reasons with the rest of the file and to clarify that the bits will be packed into a 32 bit memory location. TEST=Resulting image of a timeless build for google/guybrush results in identical binary. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic630d1709174d90336746bc37da504437c12643c Reviewed-on: https://review.coreboot.org/c/coreboot/+/58224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-11soc/amd/cezanne/include/southbridge: add some more PM register definesFelix Held
Register and bit definitions are from the Cezanne PPR #56569 Rev 3.03. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib109efe679560604ff8209b4177611eb2aa9ebdf Reviewed-on: https://review.coreboot.org/c/coreboot/+/58068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-11soc/amd/common/include/lpc: add definitions for LPC LDRQ control bitsFelix Held
The definitions of bit 9 and 10 somehow got swapped between Picasso and Renoir/Cezanne, so put those in the Cezanne-specific header file. The reference code writes the same values to the raw bits in both, so we probably would still get away with putting this into the common header, but it's better to keep the defines consistent with the documentation in all cases. Register and bit definitions are from the Cezanne PPR #56569 Rev 3.03 and cross-checked to be compatible with the Picasso PPR #55570 Rev 3.16. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a033d63eeb06eed6783e4c3797ad8dea490db8d Reviewed-on: https://review.coreboot.org/c/coreboot/+/55294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-10-05Revert "soc/amd/cezanne: Disable Co-op multitasking"Raul E Rangel
This reverts commit 5f80e7c764b9a1cb46beeaa490a4f60be04abcd4. The smm_do_relocation failure has been fixed. I also added CPU_INFO_V2 into this patch to satisfy the dependency. BUG=b:194391185, b:179699789 TEST=reboot stress test guybrush for 50 iterations. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I134c14748711a9c9865e0cc3e3185825f85248ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/57894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-10-05src/soc to src/superio: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ieafbc93e49fcef198ac6e31fc8a3b708c395e08e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58082 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27soc/amd/cezanne/early_fch: move mb_set_up_early_espi into if blockFelix Held
mb_set_up_early_espi should only be called when SOC_AMD_COMMON_BLOCK_USE_ESPI is selected. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic8ad724a2a79c1995fbe9d97f11a0f69eed9435c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-27soc/amd/cezanne: Enable CCP DMAKarthikeyan Ramasubramanian
Enable CCP DMA use in PSP verstage. This helps to reduce the boot time. BUG=b:194990811 TEST=Build and boot to OS in Guybrush. Observed a 35 - 40 ms improvement in the boot time. Before CCP DMA: 508:finished loading body 898,286 (287,576) Total Time: 2,146,182 After CCP DMA: 508:finished loading body 853,627 (240,061) Total Time: 2,110,117 Cq-Depend: chrome-internal:4116566 Change-Id: I6e4f081622a2ec78763adf56548204efc1bccf39 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-27soc/amd/common/psp_verstage: Introduce boot device driverKarthikeyan Ramasubramanian
PSP verstage can access the boot device either in Programmed I/O mode or DMA mode. Introduce a boot device driver and use the appropriate mode based on the SoC support. BUG=b:194990811 TEST=Build and boot to OS in Guybrush. Change-Id: I8ca5290156199548916852e48f4e11de7cb886fb Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57563 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-27soc/amd/cezanne, vc/amd/fsp/*: Add support for CCP DMA SVC callKarthikeyan Ramasubramanian
Add support to access the boot device from PSP through Crypto Co-Processor (CCP) DMA. Implement a SVC call to use CCP DMA on SoCs where it is supported and a stub on SoCs where it is not supported. This provides an improved performance while accessing the boot device and reduces the boot time by ~45 ms. BUG=b:194990811 TEST=Build and boot to OS in guybrush. Perform cold and warm reboot cycling for 250 iterations. Change-Id: I02b94a842190ac4dcf45ff2d846b8665f06a9c75 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-27soc/amd/common/block/include/acpimmio_map: add AOAC acronym in commentFelix Held
The Always On Always Connected block is referenced as AOAC in the code, so add that acronym in the comment and change the "Connect" to "Connected". Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6a23e0ccff62c6ceddae70e1bef5c5abf872c495 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-24soc/amd/common: factor out FSP-related parts of common KconfigFelix Held
TEST=Timeless build for Mandolin results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib2fb6c29b9f42c00f252994ae2a40b7ff668105a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-24soc/amd/common: move block/pi out of the block folderFelix Held
Since the binaryPI glue code is specific to a binary interface, but not for a hardware block, move it out of the common blocks directory. This also brings the binaryPI support in line with the FSP support which is used on the newer generations. This also drops the SOC_AMD_COMMON_BLOCK_PI Kconfig option and makes use of the already existing SOC_AMD_PI Kconfig option instead. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I014e538f2772938031950475e456cc40dd05d74c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-24soc/amd/common/block: move binaryPI S3 block into PI blockFelix Held
The code in soc/amd/common/block/s3 is specific to the AMD binaryPI coreboot integration, so move the code to soc/amd/common/block/pi. This drops the SOC_AMD_COMMON_BLOCK_S3 Kconfig option and integrates the dependencies and selections into the SOC_AMD_COMMON_BLOCK_PI Kconfig option. Since only selecting SOC_AMD_COMMON_BLOCK_PI but not SOC_AMD_COMMON_BLOCK_S3 resulted in missing functions in the linking process, we don't lose support for any working configuration by only having one Kconfig option for both parts. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib2bd99a88d8b05216688bc45d9c4f23a007ce870 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd/common/blocks/include: rename gpio_banks.h to gpio.hFelix Held
This brings the AMD SoC GPIO code in line with the Intel SoC code and removes the not really needed suffix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie2dbec81dfe503869beb2872b01a7475e2b88b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd/common/blocks: rename gpio_banks folder to gpioFelix Held
This brings the AMD SoC GPIO code in line with the Intel SoC code and removes the not really needed suffix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3dfcca2f126eb49c962b5cc32cbcf72e04f3f170 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd: rename program_gpios to gpio_configure_padsFelix Held
Use the same function name as in soc/intel for this functionality. This also brings the function name more in line with the extended version of this function gpio_configure_pads_with_override which additionally supports passing a GPIO override configuration. This might cause some pain for out-of-tree boards, but at some point this should be made more consistent, so I don't see a too strong reason not to do this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I88852e040f79861ce7d190bf2203f9e0ce156690 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-23soc/amd,intel/common/include/gpio: improve documentation of overridesFelix Held
Explicitly point out that gpio_configure_pads_with_override will ignore GPIOs that are only in the override configuration, but not in the base configuration. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1bdfcac89b81fef773938133a2699897c6ee9415 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-22soc/amd/common/block/gpio_banks: Rework GPIO pad configurationFelix Held
Before this patch, gpio_configure_pads_with_override called program_gpios once for each GPIO that needed to be configured which resulted in base_num_pads - 1 unneeded master_switch_set/ master_switch_clr sequences for the gpio_configure_pads_with_override call. Instead implement gpio_configure_pads_with_override as the more generic function and program_gpios as a special case of that which passes an empty override configuration and override pad number to gpio_configure_pads_with_override. TEST=GPIO configuration and multiplexer register values are the same for all GPIOs on google/guybrush right before jumping to the payload before and after the patch. Change-Id: Ia8e47b2a278a1887db5406c1f863ddafa6a68675 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-21soc/amd/common/block/gpio_banks: add missing types.h includeFelix Held
In this file bool, uint8_t and uint32_t are used, so include types.h directly to have those types defined instead of relying to have those included indirectly via amdblocks/gpio_banks.h. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6f4626a50219fab818e8bc5087961a731b44e71b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-21soc/amd/picasso/fsp_m_params: use DEV_PTR to check if device is enabledFelix Held
The aliases are defined in the chipset devicetree, so the device pointers will be available for all boards using this SoC. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id4c921575e978bb29e61f35e78ff2a1711acf06a Reviewed-on: https://review.coreboot.org/c/coreboot/+/57780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-21soc/amd/cezanne/fsp_m_params: use DEV_PTR to check if device is enabledFelix Held
The aliases are defined in the chipset devicetree, so the device pointers will be available for all boards using this SoC. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id655e9eba9b8e9898fa01bf03876074e136cc7c6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-09-20soc/amd/cezanna/acpi/mmio.asl: enable ACPI AOAC for I2CJulian Schroeder
This enables runtime power management for the I2C controllers. BUG=b:182556027, b:183983959 TEST=enable dynamic debug in kernel and check i2c D3/D0 transitions during suspend_stress_test. Change-Id: Ia6b9ca95d751f32b7cd701494377f15091c22d2f Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56462 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-20soc/amd/cezanne/acpi/mmio: uncomment AOAC_DEVICE macro for UARTsFelix Held
This enables runtime power management for the UART controllers. BUG=b:183983959 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4e57d6312feda459cec65f330c6d2072774d4eb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57681 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-17soc/amd/common/block/pi/image: replace stdbool.h include with types.hFelix Held
Apart from the bool type, uint8_t, uint32_t and uint64_t are used in this file, so include types.h instead of stdbool.h. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I30088d68132058f40b974fbaa822f322b58ed6c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-17soc/amd/picasso/Kconfig: increase FSP_M_SIZEFelix Held
When using a debug build of the FSP, the FSP-M binary is larger than the memory region we have allocated for it, so increase the size to make the binary of the debug build fit in there. Also adjust the VERSTAGE_ADDR so that it starts right after the the FSP-M memory region. TEST=coreboot builds now successfully when using a debug version of the FSP Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib64806bcf948d5ed4bcf8e1f50004091f125dc7e Reviewed-on: https://review.coreboot.org/c/coreboot/+/57718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-16soc/amd/common/block/pi: Add missing include stdbool.hRaul E Rangel
BUG=b:179699789 TEST=build morphius Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I298ce1ee436a5c8eb8375dc5fe55665bbf977463 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-16soc/amd/picasso/agesa_acpi: Add missing include 'arch/cpu.h'Raul E Rangel
Needed for cpuid_ext. BUG=b:179699789 TEST=build morphius Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib3a132bea06443ee4c1501b1c746400c541fd805 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-16drivers/intel/fsp2_0: Pass orientation to fsp_report_framebuffer_infoTim Wawrzynczak
Instead of always passing LB_FB_ORIENTATION_NORMAL, allow the chipsets implementing the callback to pass in an orientation. BUG=b:194967458 BRANCH=dedede Change-Id: I4aacab9449930a75aca9d68bf30d019f86035405 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-09-13soc/amd/common/block/cpu: Add missing includeRaul E Rangel
We use cpuid_eax to get the cpuid family. BUG=b:179699789 TEST=build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib73e66241bb0cfd99a035c217c527338aa2d0e4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/57566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-09Revert "soc/amd/common: Skip psp_verstage on S0i3 resume"Karthikeyan Ramasubramanian
This reverts commit b90e6fdd25f7fcc9db6be50a0b117a7509c6fdb1. Latest releases of PSP does not load PSP verstage on S0i3 resume. Hence no need to skip PSP verstage on S0i3 resume. BUG=b:196400450 TEST=Build and boot to OS in Guybrush. Trigger a suspend/resume cycle and then a reboot and ensure that the system boots to OS. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Iaeb92edb69662e6c06f4d0e3d7b760d4597bf650 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-09soc/amd/cezanne/include/gpio: add remote GPIO pin mux definitionsFelix Held
Add the pin definitions for the remote GPIOs and the GPIO pin mux values for the GPIO mode of those pins. For now, accessing the remote GPIOs is only supported from the native coreboot code running on the x86 cores and not from verstage on PSP or ACPI. BUG=b:194524995 TEST=On Majolica with a Cezanne APU configuring GPIO 262 as output and then toggling that GPIO in an infinite loop in the mainboard's bootblock code results in GPIO 262 toggling as expected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0e57042e74da88503b36d6065e9500876287f8bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/56811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-09soc/amd/common/block/acpi/gpio: add warning for remote GPIO usageFelix Held
Right now the ACPI code doesn't support accessing the remote GPIO block yet, so don't generate invalid remote GPIO access functions and warn about those being unsupported. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id364a59c9650bf4e3633b494b01ab23c0bbc50b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2021-09-09soc/amd/common/block/gpio_banks: add remote GPIO supportFelix Held
Some AMD SoCs have a 5th GPIO bank, the remote GPIO bank, which isn't located right after the 4th GPIO bank, but instead at a different location inside the APCIMMIO region. A difference to the first 4 GPIO banks is that the corresponding GPIO MUX registers aren't in a separate bank, but at the end of the remote GPIO region. So this remote GPIO region only supports 48 GPIOs with a 32 bit configuration register each and has the 8 bit GPIO MUX registers beginning at offset 0xc0 in the remote GPIO region. For now using the remote GPIOs from verstage on PSP isn't supported. To support this, it would need to map acpimmio_remote_gpio and update the pointer like it already does for acpimmio_gpio0, acpimmio_iomux and a few others. BUG=b:194524995 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic8d7ff677a99381a5558782b80b0c4cae67602db Reviewed-on: https://review.coreboot.org/c/coreboot/+/56810 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-09soc/amd/common/block/acpimmio: add remote GPIO bank ACPIMMIO regionFelix Held
Currently coreboot for the AMD SOCs only supports accessing the up to 4 main GPIO banks of up to 64 GPIOs each. Some AMD SoCs including Cezanne have another GPIO bank in the ACPIMMIO region that can contain up to 48 GPIOs beginning with GPIO 256 which is called the remote GPIO bank. The first 48 DWORDs of that ACPIMMIO bank are the 32 bit wide GPIO registers and beginning at offset 0xc0 it has the corresponding 8 bit wide GPIO MUX registers. BUG=b:194524995 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ice4e3358de17ac2601621814978cdb70e6f2c926 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-09soc/amd/common/block/include/i2c: introduce I2C_RESET_SCL_PIN macroFelix Held
Add and use the I2C_RESET_SCL_PIN macro for populating the i2c_scl_pins array that is used for the sb_reset_i2c_peripherals call to bring the I2C buses into a defined state. TEST=Timeless build results in identical image for Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifedc09d0bf745545fa0510df7d5037f02b9012a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-08soc/amd/cezanne/fsp_m_params: set usb_phy version and length.Julian Schroeder
Setting the usb_phy version and length in the soc code instead of devicetree. That way the devicetree code does not have to reapeat it for different AMD Cezanne based systems. Tested on guybrush by changing phy settings in devicetree and then checking the usb phy register. Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com> Change-Id: I2db49e095672054b9b15042fb003a93b67e3a4c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-09-08cpu/x86/tsc: Deduplicate Makefile logicAngel Pons
The code under `cpu/x86/tsc` is only compiled in when its `Makefile.inc` is included from platform (CPU/SoC) code and the `UDELAY_TSC` Kconfig option is enabled. Include `cpu/x86/tsc/Makefile.inc` once from `cpu/x86/Makefile.inc` and drop the now-redundant inclusions from platform code. Also, deduplicate the `UDELAY_TSC` guards. Change-Id: I41e96026f37f19de954fd5985b92a08cb97876c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57456 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08soc/amd/common/block/gpio_banks: add comment about acpimmio_* symbolsFelix Held
Suggested-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0016a6c7d6581cb261cab6178268c1a86b89c839 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56831 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08soc/amd/common/block/gpio_banks: inline iomux_read8 and iomux_write8Felix Held
Since both functions are only called from one function each, inline them into those functions. Also get_gpio_mux just returned the return value of iomux_read8, so there were two functions with identical functionality which shouldn't be the case. Suggested-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5662d0226edb25a9954fa47b42e208729a79e5a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56830 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-09-08soc/amd/common/block/gpio_banks: factor out gpio_mux_ptrFelix Held
This aligns the GPIO MUX access more with the GPIO control register access and will facilitate adding support for the remote GPIO bank. Also change the GPIO number argument type to gpio_t. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4054656c5cc23ea942e8dd370fbbffca304755d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-08soc/amd/common/include/acpimmio: reduce visibility of GPIO MMIO accessFelix Held
Introduce amdblocks/acpimmio_legacy_gpio100.h so that the old pre-SoC chipsets can still access the raw GPIO100 and IOMUX ACPIMMIO registers while only allowing GPIO accesses through the GPIO API on the SoCs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I18872dfa40d53ba8b0d7802eec52ede5e2ae617a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-09-08soc/amd/common/block/gpio_banks: move GPIO MUX access functionsFelix Held
Move those two functions near the top of the file to have all functions that do the hardware accesses in one place. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If787e6e1d124a932beafd73e5ce7d0ce4869e800 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-08soc/amd/common/block/gpio_banks/gpio: use unsigned types where neededFelix Held
Use unsigned integers for variables that aren't supposed to become negative. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5ee037221b9818b0474fe0376323e522c1b3b516 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-09-08soc/amd/common/block/gpio_banks/gpio: use gpio_t for GPIO numbersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7cf9cbd2a287dcfe3a47a8a6b164c2b3d8ae95d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 18:03:32 +0000