summaryrefslogtreecommitdiff
path: root/src/soc/amd/stoneyridge/Makefile.inc
AgeCommit message (Collapse)Author
2021-02-11soc/amd: include cpu/x86/smm directory in common SMM MakefileFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id6be7aa7f295e61f873bfae1fca42260d3b0db78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50464 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-02-10soc/amd: Move global_smi_enable to common/blocks/smi/smi_utilFelix Held
Change-Id: I4410772a8d3f2dedbb96601d87efb23b14e5f438 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42989 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-15build system: Always add coreboot.pre dependency to intermediatesPatrick Georgi
They all operate on that file, so just add it globally. Change-Id: I953975a4078d0f4a5ec0b6248f0dcedada69afb2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-01-15build system: Remove flock calls from intermediate processingPatrick Georgi
Now that intermediate coreboot.pre manipulation is serialized within the build system, remove the flock calls. Change-Id: I8a767918aec5fcb7127ebb19ac46e58bed7967fb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49381 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-01-14build system: Structure and serialize INTERMEDIATEPatrick Georgi
Target added to INTERMEDIATE all operate on coreboot.pre, each modifying the file in some way. When running them in parallel, coreboot.pre can be read from and written to in parallel which can corrupt the result. Add a function to create those rules that also adds existing INTERMEDIATE targets to enforce an order (as established by evaluation order of Makefile.inc files). While at it, also add the addition to the PHONY target so we don't forget it. BUG=chromium:1154313, b:174585424 TEST=Built a configuration with SeaBIOS + SeaBIOS config files (ps2 timeout and sercon) and saw that they were executed. Change-Id: Ia5803806e6c33083dfe5dec8904a65c46436e756 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49358 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-14soc/amd/stoneyridge: use SOC_AMD_COMMON_BLOCK_UARTFelix Held
Since the functions that get called by the coreboot console initialization code aren't in the SOC-specific code anymore, the SOC's uart.c can be included unconditionally in the build now. This also replaces the STONEYRIDGE_UART Kconfig option with the common AMD_SOC_CONSOLE_UART one. Change-Id: I09c15566a402895d6388715e8e5a802dc3c94fdd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49375 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-08cbfstool: Use flock() when accessing CBFS filesJulius Werner
Trying to do multiple operations on the same CBFS image at the same time likely leads to data corruption. For this reason, add BSD advisory file locking (flock()) to cbfstool (and ifittool which is using the same file I/O library), so that only one process will operate on the same file at the same time and the others will wait in line. This should help resolve parallel build issues with the INTERMEDIATE target on certain platforms. Unfortunately, some platforms use the INTERMEDIATE target to do a direct dd into the CBFS image. This should generally be discouraged and future platforms should aim to clearly deliminate regions that need to be written directly by platform scripts with custom FMAP sections, so that they can be written with `cbfstool write`. For the time being, update the legacy platforms that do this with explicit calls to the `flock` utility. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I022468f6957415ae68a7a7e70428ae6f82d23b06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/49190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-04soc/amd: move smi_util to common blockFelix Held
The functionality in smi_util applies for all 3 AMD SoCs in tree. This patch additionally drops the HAVE_SMI_HANDLER guards in the common block's Makefile.inc, since all 3 SoCs unconditionally select HAVE_SMI_HANDLER in their Kconfig and smi_util doesn't use any functionality that is only present when that option is selected. Change-Id: I2f930287840bf7aa958f19786c7f1146c683c93e Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48220 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-30soc/amd: move bootblock inside main SoC directoriesFelix Held
There's no need to have the bootblock in its own sub-directory, so move it to each SoC's main directory to avoid clutter. This makes soc/amd more consistent with the coreboot code base in src/northbridge, src/southbridge and src/soc with the exception of src/soc/intel. Change-Id: I78a9ce1cd0d790250a66c82bb1d8aa6c3b4f7162 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47982 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-21soc/amd: factor out vbnv_cmos_failed() into soc/amd/common/vbootFelix Held
Change-Id: I7f976c6c5a2a715e1a5372bb93fe657d0d86c848 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47584 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-06amdfwtool: Use shell command to get depend file listZheng Bao
The amdfwtool is not available at the beginning of the building. So it may have error if it is missing. Change-Id: Id4db70986755cef8e98877c4e92841b25ced5452 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-11-04soc/amd: Change FIRMWARE_LOCATE to FIRMWARE_LOCATIONZheng Bao
Change-Id: I3a3d187fc24ab752dfe61893c15561a92d009fe2 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46062 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-30amdfwtool: Take a config file instead of command line parametersZheng Bao
To verify the consistency, see if timeless builds with and without this patch result in identical coreboot.rom files. BUG=b:154032833 TEST=Build & boot on mandolin Change-Id: Icae73d0730106aab687486e555ba947796e5e757 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-09-20soc/amd/picasso: Fix typo of Kconfig settingZheng Bao
USE_PSPSCUREOS -> USE_PSPSECUREOS. Change-Id: I5c89975cc317cb93e79509e885010d14a79dd7e1 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20soc/amd: replace remaining license headers with SPDX onesFelix Held
Change-Id: Ib45e93faebc2d24389f8739911419dfec437bd59 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40505 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-02soc/amd/common/psp: Move early init to socFelix Held
The initialization code in common//psp is very specific to Family 15h. Move this to the stoneyridge directory. BUG=b:130660285 TEST: Verify PSP functionality on google/grunt Change-Id: Ice3d06d6437f59a529c26fc2359565c940d39482 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://chromium-review.googlesource.com/2020365 Reviewed-by: Eric Peers <epeers@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-03-18soc: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-02-20soc/amd/stoneyridge: Remove TODO for file extensionsMarshall Dawson
The comment is no longer relevant. Perhaps the intention had been to modify the names of the files delivered from AMD in order to simplify Makefile.inc. AMD firmware is distributed via the new amd_blobs repo and the filenames match the blobs as they are released. Multiple Family 15h devices are supported by this directory and their SMU Firmwares do not all follow identical naming convention. Keep the existing functionality and reword the comment. BUG=b:120118850 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Ifbf8e2286f34bc37a6178c37f8c412ec51ee02c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-04soc/amd: unify SMBus supportAaron Durbin
The SMBus support is identical between stoneyridge and picasso. Unify on common support code. Change-Id: Ic3412c5ee67977a45c50b68f36acc45c3d560db5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-12-16soc/amd,{agesa,pi}/hudson: Have do_board_reset in all stagesKyösti Mälkki
Change-Id: I38a721c359ab7761c5a3ea79da0c159fd7f58970 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37711 Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11soc/amd/stoneyridge|mbs: Deprecate SOC_AMD_NAME_PKG and othersMarshall Dawson
Add package and APU selections to mainboards and remove symbols no longer used in soc//stoneyridge. Change-Id: I60214b6557bef50358f9ec8f9fcdb7265e04663b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-12-11soc/amd/stoneyridge|mb: Add Kconfig symbol for Prairie FalconMarshall Dawson
The stoneyridge code inferred that if Merlin Falcon was built but no Merlin Falcon binaries were present, the intent must be Prairie Falcon. The two falcons are Embedded variants, and Prairie Falcon falls within Family 15h Models 70h-7Fh. Add a Prairie Falcon symbol that can be used explicitely. Drop HAVE_MERLINFALCON_BINARIES. Change-Id: I0d3a1bc302760c18c8fe3d57c955e2bb3bd8153a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-12-04amdblocks/acpimmio: add common functions for AP entryMichał Żygowski
Move the stoneyridge implementation of get/set AP entry to the common block. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I9c73940ffe5f735dcd844911361355c384f617b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-12-03soc/amd/stoneyridge: Use USE_AMD_BLOBS to remove default pathsMarshall Dawson
Remove default path/to/file strings when USE_AMD_BLOBS is not enabled. This will result in a buildable, but not runable image, in the default configuration. Drop the check for HAVE_MERLINFALCON_BINARIES in the path default. A later patch will address the poor use of this symbol All PSP blobs are still assumed to be in the same directory as the AMD public key. Qualify building the amdfw.rom intermediate image and including it into coreboot.rom on whether the public key remains "". This change infers it's OK to skip xHCI and GEC firmware too, although the images normally reside in a separate directory. This change only determines whether default paths and names exist. Paths will be updated in a follow-on patch. Change-Id: Ic21fbd7a58b340a9bcaaea456e1f38b567215b81 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37220 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-27soc/amd/stoneyridge: Add selectable APU namesMarshall Dawson
Add APU names of STONEYRIDGE and MERLINFALCON to Kconfig. The existing convention of SOC_AMD_PRODUCTNAME_PKG will be phased out. Don't explicitely use the APU_STONEYRIDGE name yet when creating default paths. Prairie Falcon relies on the default setting, and this will be addressed in a later change. Change-Id: I2061b9b02f6e9def4e151fc38951ad8abb68df1d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-11-18*/Makefile: Always build enable_usbdebug.cArthur Heymans
This always builds the usb debug callback functions when implemented. They get garbage collected if CONFIG_USBDEBUG is not set. Change-Id: I33051df583645cd00d08e06774383763172d5822 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-09-21soc/amd/stoneyridge: Use new common SPI codeRichard Spiegel
Use the new SPI code from common folder, delete spi.c. SPI related macros must be single defined, in southbridge.h if they are used by files other than the common SPI code, fch_spi.h if they are only used by the common SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h, because it can change between SOC. BUG=b:136595978 TEST=Build and boot grunt using new SPI code, with debug enabled. Check output. Change-Id: I639973d993316a10daa7564462e689b2c183f536 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2019-08-16amd/stoneyridge: Rename ramtop.c to memmap.cKyösti Mälkki
Use a name consistent with the more recent soc/intel. Change-Id: I4d67a7c3107758c81a67e1668875767beccfcdb0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-07-17soc/amd/stoneyridge: Add Merlin Falcon configurationRichard Spiegel
Add config parameter for Merlin Falcon (SOC_AMD_MERLINFALCON) and modify the Makefile.inc based on this config parameter. BUG=none. TEST=Tested later with padmelon board. Change-Id: Id9f960b8f012c5a1cfd398611d6a51838493da27 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-06-06soc/amd/stoneyridge: Remove sb_util.cMarshall Dawson
Obsolete pm_acpi_pm_cnt_blk(), and remove it and pm_acpi_pm_evt_blk(). Relocate the remaining functions to get/save UMA information to southbridge.c. Change-Id: I90c4394e3cf26f4ad60a078948a84303bda693d0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32659 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move IOMMU support to commonMarshall Dawson
BUG=b:131682806 Change-Id: Icb02180645c9e7e6dc973438c777228b031b3f54 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32657 Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move hda.c to commonMarshall Dawson
BUG=b:131682806 Change-Id: I1aa869584fd6743101c07a6a508abff6426df18d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32656 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06soc/amd/stoneyridge: Move LPC support to commonMarshall Dawson
AMD devices traditionally have the LPC-ISA bus at 14.3 and the definition has been very consistent. Relocate the feature from stoneyridge into common/block. BUG=b:131682806 Change-Id: I8d7175b8642bb17533bb2287b3e3ee3d52e85a75 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32653 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-18soc/amd/stoneyridge: Correct PSP SecureOs Kconfig symbolMarshall Dawson
Fix a spelling error in the name. TEST=Build google/aleena and compare amdfw.rom before/after Change-Id: I727ba1d6a8991caa1cdddcfca94c55c73954320a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-07soc/amd/stoneyridge: Convert SMU fanless optionsMarshall Dawson
Change the amdfwtool command line arguments to use the new --subprogram option. TEST=Verify amdfw.rom is unchanged before and after the conversion BUG=b:126691068 Change-Id: Iaae4094251974b8dad48b8d2c37bb2e43a412237 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31736 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-07soc/amd/stoneyridge: Call amdfwtool with different argumentsMarshall Dawson
To prepare for consolidating amdfwtool command-line options, change the stoneyridge makefile to use the ones that will be kept. By using the new --combo-capable option, the PSP directory's pointer still appears in the correct location within the the Embedded Firmware structure. TEST=Confirm amdfw.rom file is unchanged before/after when building google/grunt BUG=b:126691068 Change-Id: Ia31ebdcb8c392d75c56811b60f1ae673f7ba79cb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31730 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-25security/vboot: Add measured boot modePhilipp Deppenwiese
* Introduce a measured boot mode into vboot. * Add hook for stage measurements in prog_loader and cbfs. * Implement and hook-up CRTM in vboot and check for suspend. Change-Id: I339a2f1051e44f36aba9f99828f130592a09355e Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-06usbdebug: Make the EHCI debug console work in the bootblockArthur Heymans
Currently this needlessly initializes the hardware in the both the romstage and the bootblock, but it works. Build option is renamed to USBDEBUG_IN_PRE_RAM to reflect the use better, related support files can be built to pre-ram stages regardless of usbdebug being enabled or not. Tested on Google/peppy (adapted to C_ENVIRONMENT_BOOTBLOCK). Change-Id: Ib77f2fc7f3d8fa524405601bae15cce9f76ffc6f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30480 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-11-30security/vboot: Fix remaining measured boot issuesPhilipp Deppenwiese
Makes vboot measured boot mode available for all boards. * Increase Tegra210 and Rockchip3228 SRAM for romstage/verstage. * Add missing files for Intel apollolake and AMD stoneyridge as TPM driver target. Change-Id: I35a85b8f137f28cd9960f2c5ce95f8fa31185b82 Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-on: https://review.coreboot.org/c/29840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-10-03soc/amd/stoneyridge: Add IOMMU supportMarc Jones
Enable the IOMMU in AGESA and copy the AGESA generated IVRS ACPI table. BUG=b:116196614 TEST=Check dmesg for AMD-Vi messages. Change-Id: I688d867c7bd4949a57b27c1b6a793c6a6e4a717a Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/28753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-09-07amd/stoneyridge: Relocate MCA error identificationMarshall Dawson
Move the process of interrogating the Machine Check registers into its own file. This rearranges source code in preparation of supporting a Boot Error Record Table, which stoneyridge will use to report latent MC errors to the OS. BUG=b:65446699 TEST=inspect BERT region, and dmesg, on full patch stack. Use test data plus a failing Grunt system. Change-Id: Ia3275e9135dc96ba4a717c9371f38843fa1e3e64 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/28475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-31src/soc/amd/stoneyridge: Remove IMC supportRichard Spiegel
Per AMD, the Integrated Micro Controller is not a supported feature of the Stoney Ridge APU. Systems are expected to implement an external EC for desired features. Remove all stoney IMC files and functions from src/soc/amd/stoneyridge. There are 2 "IMC bits" left (and used) that are not truly IMC. New BKDG describe these bits, so a new patch will be released later to fix the names and comment. BUG=b:111780177 TEST=Build grunt and gardenia Change-Id: I6a24e4c3f03d04713a030b884c611d9c64c4cb3a Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/27651 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-16soc/amd/stoneyridge: Add GPIO functions to SMMMarc Jones
GPIO functions are required by the Grunt SMI handler. Change-Id: Id729139b02c10bdd922b3df298f8f9feb1aff745 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/27485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-05-27stoneyridge GPIO: Create and use PAD_INT for interrupt pinsRichard Spiegel
The default interrupt control for GPIO pins within stoneyridge is for edge triggered, high. However, sometimes these need to change, or maybe the interrupt needs to be reported or delivered. This was the case of platform grunt, where the interrupt related bits were being changed afterwards. Ideally all the bits should be programmed through the same procedure. Create several PAD_INT definitions (for general configuration, for trigger configuration and for interrupt type configuration) and change function sb_program_gpios() to accept the output from PAD_INT_XX and program all the necessary bits while keeping compatibility with other PAD_XX definitions. BUG=b:72875858 TEST=Add code to report GPIO and interrupt configuration, build grunt and record a baseline. Add new code, rebuild grunt and record a test output. Compare baseline against test, there should be no change in GPIO or interrupt programming. Remove code that reports GPIO/interrupt configuration. Change-Id: I3457543bdf64ec757fd82df53c83fdc1d03c1f22 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-04-27soc/amd/stoneyridge: Enable CMOS VBNV backup to flashMarc Jones
Now that we have SPI flash writes working, we can support VBOOT_VBNV_CMOS_BACKUP_TO_FLASH. This requires the mainboard to reserve the area in FMAP. BUG=b:77347873 TEST=Manually clear CMOS and check coreboot restores VBNV from flash. Change-Id: I488dbfc4c200f5100374d47feb0a0522e6a60e88 Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/25842 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-10soc/amd/stoneyridege: Create AP jump structureRichard Spiegel
As part of moving AGESA calls from bootblock to romstage, create infrastructure to pass a pointer to the AP cores, so they can jump directly to romstage. BUG=b:74236170 TEST=Build and boot grunt, actual test will be performed at a later patch. Change-Id: If716d1c1970746f2ad90ef71ae9062c99f219897 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-21soc/amd/stoneyridge: Add functions for GPIO interruptsChris Ching
Add a function to configure interrupt settings for a GPIO. This does not currently configure GEVENT signals. The second function returns the GPIO interrupt status and clears the flag if set. BUG=b:72838769 BRANCH=none TEST=Update and test interrupt settings for GPIO_9 on grunt Change-Id: I1addd3abcb6a57d916b1c93480bacb0450abddf2 Signed-off-by: Chris Ching <chingcodes@chromium.org> Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/23624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-02-16amd/stoneyridge: Move model_15_init.c to cpu.cMarshall Dawson
Move the remaining model_15_init.c functionality to cpu.c, making it similar to other soc implementations. Change-Id: Ic8c62b09209fcdaa50ff8ffc7773ef155f979a1b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23724 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-01-31amd/stoneyridge: Move TValid and SmmLock to end of POSTMarshall Dawson
Delay making TSEG valid until the end of POST. After the CPU setup, there are times where coreboot needs to access the SMRAM from outside of SMM. Also relocate locking of the SMM settings from the CPU init to the end of POST (or just before resuming). Change-Id: I70b7e33e7045d397e41f571caff6a2acbb64eaab Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/23437 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-28amd/stoneyridge: Add NV storage to ramtopMarshall Dawson
The scratch registers in northbridge used for storing the top of cacheable memory are volatile. Use the BiosRam storage in the FCH instead. TEST=Suspend and resume Kahlee with complete S3 patch stack BUG=b:69614064 Change-Id: Ieb3cfd173c70bf899a6391d62d1df87b38485f30 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-24soc/amd/stoneyridge: provide alternate monotonic timerAaron Durbin
The TSC has been observed to be ticking at a non-constant rate in early boot. The root cause is still not known, but this misbehavior necessitates an alternative monotonic timer source. Use the perf TSC which ticks at 100 MHz. This also means the timestamp table is not accurate as well. Root cause of TSC rate instability needs to be resolved in order to fix that. BUG=b:72170796 Change-Id: Ie052169868a9d9f25f8cc0ce8dd8251b560e671f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/23397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-01-03soc/amd/stoneyridge: Add I2C supportChris Ching
BUG=b:69416132 BRANCH=none TEST=make Change-Id: Id940af917c9525aba7bc25eea0821f5f36a36653 Signed-off-by: Chris Ching <chingcodes@chromium.org> Reviewed-on: https://review.coreboot.org/22959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-07amd/stoneyridge: Delete early_setup.cRichard Spiegel
All preparation done, early_setup.c now useless. Delete early_setup.c, BUG=b:64033893 TEST=None. Change-Id: Ibe75a2d5cc46641e9d0af462a8a0ba5bb7a0f9c3 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22569 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-12-04amd/stoneyridge: Transfer functions from early_setup.c to southbridge.cRichard Spiegel
In preparation to deleting early_setup,c, transfer all functions except those related to wide IO to southbridge.c. BUG=b:64033893 TEST=Build and boot to OS. Change-Id: Ibe1d87cb3e0eb3e8ed4d2dc2adbddf2e13557c9e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/22568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-12-01soc/amd/stoney: clean up and update reset.cMartin Roth
- Move #defines to soc/northbridge.h, add other reset definitions to soc/southbridge.h. - Clean up file to use definitions instead of magic numbers. - Add do_soft_reset() BUG=b:69224851 TEST=Build gardenia; Build & boot Kahlee Change-Id: I0cc4c04b53b7fec38d45e962ff1292d8c717269c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22439 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-29soc/amd/stoneyridge: Add mainboard call for SPD valuesMarc Jones
Add a mainboard function call to write the AGESA SPD buffer. Removes the unneccesary dimm_spd.c file. BUG=b:67845441 Change-Id: Id42622008b49b4559e648a7fa1bfd9f26e1f56a4 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-11-20amd/stoneyridge: Fix SPD files and functions camel caseMarc Jones
Remove ugly camel case in the soc/amd/common and Stoney Ridge SPD files and functions. Update the related mainboards. Also, remove a unreferenced function prototype, smbus_readSpd(). Change-Id: I51045b6621f0708d61a570acbdcb4e6522baa1ea Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-17amd/stoneyridge: Add SPI controller driverMarshall Dawson
Add more definitions for the controller registers and fields. Add source that is adapted from hudson and updated for Stoney Ridge. This was tested with follow-on patches that write S3 data to flash. BUG=b:68992021 Change-Id: I61d64cfdb4fce11c068113680da7ba6a199d6893 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-11-10amd/stoneyridge: Implement vboot_platform_is_resumingMarshall Dawson
Change-Id: I23882ad8cd93fbc25acd8a07eca6a78b6bafc191 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08amd/stoneyridge: Add SMU firmware blobs to cbfsMarshall Dawson
Stoney Ridge supports two different sets of SMU firmware, one for either fanless OPNs and one for fanned. Add a Kconfig mechanism to select the proper set and add the blobs into cbfs. BUG=b:66339938 Change-Id: I8510823e2232b74ec6fe001cc28953f53b2aa520 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-08amd/stoneyridge: Remove fixme.cMarshall Dawson
Move the two functions in fixme.c to places where they make more sense. Coincidentally fix the todo in amd_initcpuio() and use bsp_topmem() instead of explicitely reading the MSR. BUG=b:62241048 Change-Id: Ica80b92f48788314ad290ccf72e6847fb6d039c3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/22297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20Stoney Ridge Platforms: Make AGESA callout tables commonMartin Roth
There was no reason to have the AGESA callout tables in each mainboard, so move them to soc/amd/common. Move chip specific functions into the stoneyridge directory: - agesa_fch_initreset - agesa_fch_initenv - agesa_ReadSpd Combine agesa_ReadSpd and agesa_ReadSpd_from_cbfs, and figure out which to use. Soldered-down memory still needs to be supported in a future commit, as stoney supports both DDR3 & DDR4. A bug has been filed for support for the upcoming Grunt platform. BUG=b:67209686 TEST=Build and boot on Kahlee Change-Id: Ife9bd90be9eb0ce0a7ce41d75cfef979b11e640b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-16soc/amd/stoneyridge: Update AMD firmware placement optionsMartin Roth
- Don't force the selection of placing the firmware outside of cbfs when using vboot. - Set a prompt to allow the option of placing it outside of cbfs. - Leave all Kconfig defaults the same. - Place the AMD firmware directory table in the specified location even when using the 'outside of cbfs" option. - Print where the firmware is being placed when placing it outside of cbfs. BUG=b:65484600 TEST=Assign PSP firmware location, build & test. Firmware shows up inside CBFS. Set 'outside of cbfs' option, verify firmware gets written to the correct location. Change-Id: Ia8258b5c2ecfaaa42d623e3376ec3233115aed58 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21867 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-05soc/amd/stoneyridge: Pass firmware dir location to amdfwtoolMartin Roth
The amdfwtool now outputs firmware that is correctly built for the new location. BUG=b:65484600 TEST=Assign PSP firmware location, build & test. Change-Id: Ifa2e99ea031fc0d9f165ae44ff6b1afef369eb28 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-03soc/amd/stoney: Allow alternative placement for AMD FW directoryMartin Roth
Allow the AMD FW directory to be placed at one of the alternative locations within the ROM. BUG=b:65484600 TEST=Assign PSP firmware location, build & test. Change-Id: I9c95b9805c60ab6204750f7929049c7382e0c6cd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-10-02amd/stoneyridge: Move pm/smi_read/write functions to util fileMarshall Dawson
Pull all pm_read and write, smi_read and write variants into a single file. Change-Id: I87d17361f923a60c95ab66e150445a6a0431b772 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-02amd/stoneyridge: Add uart.c to smm-y listMarshall Dawson
This corrects a build error when a developer needs DEBUG_SMM and one of the APU's internal UARTs is used. Change-Id: Ie1962e969a8cb93eefc0b86bf4062752580e5acd Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21740 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-09-30amd/stoneyridge: Remove HAVE_SMI_HANDLER from makefileMarshall Dawson
Stoney Ridge always now selects HAVE_SMI_HANDLER so it is pointless to use the variable in Makefile.inc. Make all files built into smm unconditional. Change-Id: I4ea89d7bce83a99328c58897a4098debacd86d66 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27soc/amd/stoneyridge: Add postcar stageMarshall Dawson
Insert a postcar stage for Stoney Ridge and move romstage's CAR teardown there. The AMD cache-as-ram teardown procedure currently uses a wbinvd instruction to send CAR contents to DRAM backing. This allows preserving stack contents and CAR globals after the teardown happens, but likely results in memory corruption during S3 resume. Due to the current base of the DCACHE region, reverting to an invd instruction will break the detection mechanism for CAR migrated variables. Using postcar avoids this problem. The current behavior of AGESA is to set up all cores' MTRRs during the AmdInitPost() entry point. This implementation takes control back and causes postcar's _start to clear all settings and set attributes only for the BIOS flash device, TSEG, and enough space below cbmem_top to load and run ramstage. BUG=b:64768556 Change-Id: I1045446655b81b806d75903d75288ab17b5e77d1 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-27amd/stoneyridge: Convert MP init to mp_init_with_smmMarshall Dawson
Change the Stoney Ridge SOC to a more modern method for setting up the multiple cores. Add a new cpu.c file for most of the processor initiliazation. Build mp_ops with the necessary callbacks. Note also that this patch removes cpu_bus_scan. Rather than manually find CPUs and add them to the devicetree, allow this to be done automatically in the generic mp_init.c file. SMM information is left blank in mp_ops to avoid having mp_init.c install a handler at this time. A later patch will add TSEG SMM capabilities for the APU. This patch also contains a hack to mask the behavior of AGESA which configures the MTRRs and Tom2ForceMemTypeWB coming out of AmdInitPost. The hack immediately changes all WB variable MTRRs, on the BSP, to UC so that all writes to memory space will make it to the DRAM. BUG=b:66200075 Change-Id: Ie54295cb00c6835947456e8818a289b7eb260914 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-20vboot: reset vbnv in cmos when cmos failure occursAaron Durbin
There's an occasional issue on machines which use CMOS for their vbnv storage. The machine that just powers up from complete G3 would have had their RTC rail not held up. The contents of vbnv in CMOS could pass the crc8 though the values could be bad. In order to fix this introduce two functions: 1. vbnv_init_cmos() 2. vbnv_cmos_failed() At the start of vboot the CMOS is queried for failure. If there is a failure indicated then the vbnv data is restored from flash backup or reset to known values when there is no flash backup. BUG=b:63054105 Change-Id: I8bd6f28f64a116b84a08ce4779cd4dc73c0f2f3d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-09-10amdfw: Clean up makefiles a bit moreMartin Roth
- Get rid of CONFIG_ prefix from variables that don't come from Kconfig. - Remove 2nd set of variables that are duplicates of the first set. - Delete duplicate set of Prerequisites Change-Id: I194b4c790b3e35353d480d34b60507a00f10ef11 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21451 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-09-08soc/amd/stoneyridge: Update amdfw buildMartin Roth
- The SMU firmware used to be named *.sbin, now is named *.csbin. Update the makefile so that the files can be named as they are delivered and don't have to be renamed. - Add a Kconfig option to allow the secure os binaries to be excluded. BUG=b:64932297 TEST=Build with old and new firmware, verify file sizes. Change-Id: I3091f8af126159488c3c398a6dc881fa05039cff Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21450 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2017-08-14stoneyridge: Rename hudson to southbridgeMarc Jones
Simplify funciton names and remove reference to hudson in stoneyridge. The southbridge in Stoney Ridge is Kern and hudson naming is no longer accurate. BUG=b:62200157 BRANCH=none TEST=Build and booted on Kahlee. Change-Id: Ide7a72dae69b881997101f1e37a1ac739901744d Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20912 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-31soc/amd/stoneyridge: Add GPIO functions to romstageMarc Jones
A mainboard may access GPIO in romstage. Change-Id: Id380c6570943ce2a0bf6112d62cc91aeae283fcf Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-31soc/amd/stoneyridge: Add GNVSMarc Jones
Add ACPI asl for global non-volatile storage (GNVS). Change-Id: I9ecab92181bfe60e7b6c6e91ffb9fa843345352f Signed-off-by: Marc Jones <marc.jones@scarletltd.com> Reviewed-on: https://review.coreboot.org/20275 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27soc/amd/stoneyridge: Remove unused SD controllerMarshall Dawson
Remove the unused support code from the old multi-device hudson SD controller. The binaryPI blob contains the correct steps for setting up SD and the public BKDG doesn't completely document the controller. The sd.c file was using device IDs not associated with the Stoney Ridge APU. The hudson_enable() code removed was also looking for incorrect device IDs and the PM_MANUAL_RESET register doesn't behave as the source indicates. The SD default settings may be overridden. Future improvements may include a few Kconfig options and a weak call to the mainboard for overriding additional defaults. BUG=chrome-os-partner:62580062 Change-Id: I7dbd70320740e8a05e6bf16af125d67012f20674 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-07-27soc/amd/stoneyridge: Enable verstage supportMarshall Dawson
Add Kconfig selects for vboot and update the makefile to pick up files to be used in verstage. Change-Id: If5c439a330d687156006aec2ebaea18ff2c96b3e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19756 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-07-27soc/amd/common: Convert to C_ENVIRONMENT_BOOTBLOCKMarshall Dawson
Add dedicated CAR setup and teardown functions and Kconfig options to force their inclusion into the build. The .S files are mostly duplicated code from the old cache_as_ram.inc file. The .S files use global proc names in anticipation for use with the Kconfig symbols C_ENVIRONMENT_BOOTBLOCK and POSTCAR_STAGE. Move the mainboard romstage functionality into the soc directory and change the function name to be compatible with the call from assembly_entry.S. Drop the BIST check like other devices. Move InitReset and InitEarly to bootblock. These AGESA entry points set some default settings, and release/recapture the AP cores. There are currently some early dependencies on InitReset. Future work should include: * Pull the necessary functionality from InitReset into bootblock * Move InitReset and InitEarly to car_stage_entry() and out of bootblock - Add a mechanism for the BSP to give the APs an address to call and skip most of bootblock and verstage (when available) (1) - Reunify BiosCallOuts.c and OemCustomize.c (1) During the InitReset call, the BSP enables the APs by setting core enable bits in F18F0x1DC and APs begin fetching/executing from the reset vector. The BSP waits for all APs to also reach InitReset, where they enter an endless loop. The BSP sends a command to them to execute a HLT instruction and the BSP eventually returns from InitReset. The goal would be to preserve this process but prevent APs from rerunning early code. Change-Id: I811c7ef875b980874f3c4b1f234f969ae5618c44 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/19755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-29soc/amd/stoneyridge: Convert monotonic timerMarshall Dawson
Use the TSC for the Stoney Ridge monotonic timer. Modern AMD CPUs have invariant timestamp counters. This patch brings the feature more in line with other devices and allows the use of typical monotonic timer functions. BUG=chrome-os-partner:62578062 Change-Id: I07b05fbc7cdea54a45daac01954284a9fd67e42f Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/stoneyridge: Remove IDE controllerMarshall Dawson
Remove IDE from the Stoney Ridge source. This APU doesn't have an IDE controller. The support was left over from pi/hudson. BUG=chrome-os-partner:62580062 Change-Id: I7316c113a7464089ccfbea6b6cf69787940b9e97 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-27soc/stoneyridge: Remove FCH PCIe supportMarshall Dawson
Remove the pcie.c file. Historically PCIe lanes have been available from the Gfx and/or the FCH. The integrated FCH in this APU has no PCIe available. BUG=chrome-os-partner:62580062 Change-Id: Ie89383dadfaa57c5a6d185e74551ae50ac8d9778 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/20319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-06-27soc/amd/stoneyridge: Remove PCIe-PCI bridgeMarshall Dawson
The Stoney Ridge does not contain this bridge like some of the older Hudson FCHs. Remove this support from the source. This moves the Stoney Ridge IRQ setup to the southbridge file, hudson.c. BUG=chrome-os-partner:62580062 Change-Id: I8f974ba76b8c20f4335dd8872eaf4b8172188ee2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/20198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc/amd/stoneyridge: Add northbridge supportMarc Jones
Copy northbridge files from northbridge/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. Changes: - update chip_ops and device_ops - remove multi-node support - clean up Kconfig and Makefile Change-Id: Ie86b4d744900f23502068517ece5bcea6c128993 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc/amd/stoneyridge: Add CPU filesMarc Jones
Copy cpu/amd/pi/00670F00 to soc/amd/stoneyridge and soc/amd/common. This is the second patch in the process of converting Stoney Ridge to soc/. Changes: - update Kconfig and Makefiles - update vendorcode/amd for new soc/ path Change-Id: I8b6b1991372c2c6a02709777a73615a86e78ac26 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19723 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-26soc: Add AMD Stoney Ridge southbridge codeMarc Jones
Copy the Hudson/Kern code from southbridge/amd/pi/hudson. This is the first of a series of patches to migrate Stoney Ridge support from cpu, northbridge, and southbridge to soc/ Changes: - add soc/amd/stoneyridge and soc/amd/common - remove all other Husdon versions - update include paths, etc - clean up Kconfig and Makefile - create chip.c to contain chip_ops Change-Id: Ib88a868e654ad127be70ecc506f6b90b784f8d1b Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/19722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 02:15:51 +0000