Age | Commit message (Collapse) | Author |
|
The aliases are defined in the chipset devicetree, so the device
pointers will be available for all boards using this SoC.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id4c921575e978bb29e61f35e78ff2a1711acf06a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
When using a debug build of the FSP, the FSP-M binary is larger than the
memory region we have allocated for it, so increase the size to make the
binary of the debug build fit in there. Also adjust the VERSTAGE_ADDR so
that it starts right after the the FSP-M memory region.
TEST=coreboot builds now successfully when using a debug version of the
FSP
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib64806bcf948d5ed4bcf8e1f50004091f125dc7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Needed for cpuid_ext.
BUG=b:179699789
TEST=build morphius
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib3a132bea06443ee4c1501b1c746400c541fd805
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add and use the I2C_RESET_SCL_PIN macro for populating the i2c_scl_pins
array that is used for the sb_reset_i2c_peripherals call to bring the
I2C buses into a defined state.
TEST=Timeless build results in identical image for Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifedc09d0bf745545fa0510df7d5037f02b9012a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
drive_scl in soc/amd/common/block/i2c/i2c.c writes the raw GPIO MMIO
configuration register and drives it as output, so don't initially
configure the GPIO as input with no pull up/down. This is a preparation
to use the common AMD GPIO access functions instead of the raw register
accesses, since the gpio_set function only sets the output value, but
doesn't reconfigure the direction. Using gpio_output there instead would
reconfigure the direction as well, but would result in doubling the
number of MMIO accesses, so just configure the GPIOs correctly right
away to avoid that.
TEST=The waveform on the SCL pin of I2C3 on a barla/careena Chromebook
looks exactly the same as before during the reset_i2c_peripherals call.
This was probed at the SCL pad of the unpopulated I2C level shifter on
the side that is connected to the SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8e94afe0c755a02abcc722d5094e220d8781f8f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56807
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the FSP binaries for Picasso are present in the amd_blobs repo,
select the ADD_FSP_BINARIES option if the Kconfig option to check out
that repo is set.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9a8571730cf271ad5e113e5df87700882b3c5475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
commit de7262f82cdc1a7c868dbc9ca41e186e885eb2ba (soc/amd: remove special
GPIO_2 override soc_gpio_hook) removed the workaround that needed those
definitions, so remove the now unused GPIO_2_EVENT definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3f3e3061eade0e0cd25e2263451ccf6cefdc4ea4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56812
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:194919326
TEST=See SPI settings in bootblock
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I8ee8981986990240b09414cde8b84d9b109cb5b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: I916f19e022633b316fbc0c6bf38bbd58228412be
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Move IVRS acpi table generation code to common, so that it can be shared
by other programs.
BUG=b:190515051
TEST=Build picasso coreboot image. Compare IVRS tables before/after
change.
Change-Id: Icd5fec3a9d66e8301e267312020e726d9bc1aa70
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
It appears the pspp_policy enum is not the same as the FSP definition
currently being used. This means that the incorrect PSPP value setting
would get read by FSP. For Zork programs this meant we actually were
setting links as DXIO_PSPP_BALANCED instead of DXIO_PSPP_POWERSAVE.
This change adds DXIO_PSPP_DISABLED as the first enum value to properly
match the FSP definition and adjusts non AMD Customer Reference Boards
that reference the enum to still send the same value even though it has
now change definitions. If we actually want DXIO_PSPP_POWERSAVE for
those boards that can be adjusted in a future change.
BUG=b:193495634
TEST=Boot to OS with Majolica and Guybrush and run 10G iperf on wifi
with other server on local network.
Change-Id: I287b6d3168697793a2ae8d8e68b4ec824f2ca5ef
Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Picasso has an integrated FCH and no south bridge, so change the sb
prefix to fch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I82aed68104ea9570827646c818e100bd7e04d1af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56526
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
sb_clk_output_48Mhz is only used in fch.c where it is also implemented,
so no need to have it visible outside of that compilation unit.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2b0d10ff26bdf54ea791aa66bf400578466d54cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56525
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable RSA and SHA for cezanne since support has been added to the PSP.
Also picasso and cezanne have different enums definitions for
hash algorithm, so split that out into chipset.c.
BUG=b:187906425
TEST=boot guybrush, check cbmem -t and the logs
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I725b0cac801ac0429f362a83aa58a8b9de158550
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I6eb0881ab05730b094caef2a9258c4d4d827195b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
If we don't escape the $ then the actual $(obj) path will be written
into the .config file. With this change `$(obj)` is written into the
.config file. The Makefile then does:
PSP_VERSTAGE_FILE=$(call strip_quotes,$(CONFIG_PSP_VERSTAGE_FILE))
Since this is a recursive assignment the $(obj) will be expanded at that
point.
This change makes it easier to compare full .config files.
BUG=none
TEST=Build ezkinil
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic961df148d3f22585f3441d75c3f2454329c678a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
For Cezanne stubs are added for the functions that the SoC-specific code
needs to provide. Since the mca_is_valid_bank stub on Cezanne always
returns false, the checks get skipped for it at the moment. The actual
functionality will be added in a later patch.
Change-Id: Ic31e9b1ca7f8fac0721c95935c79150d7f774aa4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56290
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
To factor out the rest of the common MCAX code, mca_bank_name[] may only
be accessed by accessor functions, so implement this for the last place
that still accessed mca_bank_name[] directly.
Change-Id: Ic6548d3ceeb9c00ad344fc0bb3d97893e17a43a9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56294
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I960a2f384f11e4aa5aa2eb0645b6046f9f2f8847
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56283
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I67a88298c19657a5049ab69799be887555ca7240
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I139d1fe41bad5213da8890c2867f275b6847e3e1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56281
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia489dbfba59c334cf29f96a4000cef73b9b797d4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56279
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I42abff5efcd7c85d2932a7aaacc736d0376cfaa0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
In mca_check_all_banks only check valid MCA banks for errors. This
aligns the Picasso code a bit more with the Stoneyridge code base which
will be updated in a follow-up patch. This is a preparation for
commonizing the MCA(X) handing in the soc/amd sub-tree.
Change-Id: I0c7f3066afd220e6b8bf8308a321189d7a2679f6
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56275
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The length of mca_bank_name should match the return value of
mca_get_bank_count which gets the number of MCA banks from an MSR.
TEST=No error message on serial console on amd/mandolin
Change-Id: Ibdad51a7ef27266e110dfbb43188361952618342
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56274
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also use array indices for the initialization.
TEST=Checked with the public Picasso PPR #55570-B1 Rev 3.16
Change-Id: I10a65210da73e64b67d613609fcc0f9a245a81fb
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56273
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no technical reason this needs to be done in romstage. Moving
it into ramstage allow us (in future CLs) to use threads to pre-load
the apob from SPI.
BUG=b:179699789
TEST=Boot and Ezkinil and Guybrush and verify APOB update still work
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I960437ff4400645de5a3e7447fcdbc52de85943e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Since we can use both the old MCA registers and the new MCAX registers
to access the MCA status registers, we can use the common
mca_clear_status function here.
Change-Id: I9ddcc119eca2659361b1496fd7ffe124fb323d26
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I5496fd27f5c56d35ab95a5e02ea313b5b5536668
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56241
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id7a716a2598a6a7bea2d2d56898ea6329b5a3bec
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56240
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7cd05a389c34c2e5f3d0ab4cd06d60a7e3e5cad9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56239
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib31075fd615eaa8492ce0179b3b21317554f1c80
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56238
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Only the fields bank and sts from the mca_bank struct were used outside
a local scope, so remove the rest. Also rename the struct that now only
contains the bank number and the status MSR content to mca_bank_status.
Change-Id: I925347dff950ac2bd021635ca988c02fba48df7f
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56237
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I23aa4d36d4e6d4c7ed66800c2e7963c4ed03c393
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56236
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since initial_lapicid() returns an unsigned int, change the type of the
local variables the return value gets assigned to to unsigned int as
well if applicable. Also change the printk format strings for printing
the variable's contents to %u where it was %d before.
Change-Id: I289015b81b2a9d915c4cab9b0544fc19b85df7a3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55063
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the common mca_get_bank_count function instead of open-coding the
functionality to get the MCA bank number. Also re-type the num_banks
variable from signed in to unsigned int, since the number of MCA bank is
always positive.
Change-Id: I126767cf9ad468cab6d6537dd73e9b2dc377b5c4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Ib74ff1d585f8ef54960e6a1eafd5a280907f8675
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56180
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allow hot plug devices to subscribe to IOMMU services. Currently the
IOMMU end range is limited to device B:0 D:1f F:6. This prevents the
devices on bus 1 and higher to subscribe to IOMMU services. As per AMD
IOMMU spec v3 section 5.2.2.1 all possible device IDs must be defined,
whether the device ID is actually populated or not. Device entries are
used to report ranges when hot-plug and SR-IOV devices are possible.
With this change the hot plug devices can now bind to IOMMU services
(as tested on kernel v5.4), and below errors are not seen in dmesg.
AMD-Vi: Event logged [IO_PAGE_FAULT device=04:00.3 domain=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=05:00.0 domain=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=04:00.4 domain=0x0000]
TEST= Verify dGPU can enumerate on hotplug. No IO page fault errors seen.
The hot plug devices can successfully bind to IOMMU services in
kernel.
Signed-off-by: Aamir Bohra <aamirbohra@gmail.com>
Change-Id: I256c0f8032662674a4d75746de49c250e341c579
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55816
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce the `ARCH_ALL_STAGES_X86` Kconfig symbol to automatically
select the per-stage arch options. Subsequent commits will leverage
this to allow choosing between 32-bit and 64-bit coreboot where all
stages are x86. AMD Picasso and AMD Cezanne are the only exceptions
to this rule: they disable `ARCH_ALL_STAGES_X86` and explicitly set
the per-stage arch options accordingly.
Change-Id: Ia2ddbae8c0dfb5301352d725032f6ebd370428c9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
To generalise the choice of 32-bit or 64-bit coreboot on x86 hardware,
have platforms select `ARCH_X86` directly instead of through per-stage
Kconfig options, effectively reversing the dependency order.
Change-Id: If15436817ba664398055e9efc6c7c656de3bf3e4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Using existing defines instead of magic values improves readability of
the code. Also add comments to the MADT IRQ overrides to make it clearer
what those actually do.
TEST=Timeless build results in identical binary for amd/gardenia
(Stoneyridge), amd/mandolin (Picasso) and amd/majolica (Cezanne)
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I224ffbe8eb65bcdd5fc70c0ff8b15d55b3f6be01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55613
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the default state of the MMIO UART devices in the chipset
devicetree is off, the mainboard devicetree entries that disable MMIO
UART devices are removed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I913a587802020ce4e182b48632cdde1104c2a6e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55545
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6deb2a4c632d39112dcce71f076742a1b62ee89b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I06102f4fcc3bf9de332c71a52c632241b95cde19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7edae2142120dec9e11ef823b561401b7e0bc208
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Replace the magic numbers with the existing defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2d98ea8c5bb0e487c7eef0b0a1cdada9cb04df4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Factoring out those defines allows using them easily in the ACPI code
without having to use preprocessor macros.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I99cb03de8782a0eeeb505f567b982099b0e8a18d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:184978118
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I03554a151aa6a6d9e15d74c63cd02239b788808a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
BUG=b:179092979
TEST=boot guybrush and see romstage tag
14:finished loading romstage 2,683,151 (10,079)
1:start of romstage 2,683,159 (8)
970:<unknown> 2,683,386 (227)
15:starting LZMA decompress (ignore for x86) 2,683,391 (5)
16:finished LZMA decompress (ignore for x86) 2,717,867 (34,476)
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ib8b3fe909140e05a89b74df526bf4f81799ad915
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55398
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move dmi.c code to common/fsp to be shared among different SOCs.
BUG=b:184124605
Change-Id: I46071556bbbbf6435d9e3724bba19e102bd02535
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Note that there are assumptions about LAPIC MMIO location
in both AMD and Intel sources in coreboot proper.
Change-Id: I2c668f5f9b93d170351c00d77d003c230900e0b4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55194
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This also adds BERT table gerenation support for Cezanne, but since the
functionality to populate the BERT memory region isn't implemented yet,
this won't result in a BERT table being generated on Cezanne, since
bert_generate_ssdt will always return false there.
TEST=BERT ACPI table generation still works on AMD/Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I69b4a9a7432041e1f4902436fa4e6dee5332dbd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I14577e80e722cb5ccf344a4520cf3adde669fc5e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54149
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I9833c4f6c43b3e67f95bd465c42d7a5036dff914
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since the MCA(X) registers have defined values on the cold boot path,
the is_warm_reset check can be dropped. Also the warm reset bit in the
NCP_ERR register doesn't behave as the PPR [1] suggested; no matter if
something was written to the register or the machine went through a warm
reset cycle, the NCP_WARM_BOOT bit never got set.
[1] checked with PPR for AMD Family 17h Models 11h,18h B1 (RV,PCO)
#55570 Rev 3.15
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4e6df98ffd5d15ca204c9847a76c19c753726737
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The chipset devicetree only has the essential PCIe devices enabled that
are needed for the SoC code to work. It also defines aliases for all
PCIe devices that can be used to reference the devices in the mainboard-
specific devicetrees and devicetree overrides. To make the change easier
to review that part will be done in a follow-up patch.
Despite missing in the PPR, device pci 18.7 exists on Picasso.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b7c3fd32579a23539594672593a243172c161c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
On RW boot path psp_verstage call cbfs_map which calls chain of
_cbfs_alloc, cbfs_boot_lookup and cbfs_get_boot_device. Then
cbfs_get_boot_device initializes MCACHE which is used later.
However on RO boot path psp_verstage doesn't try to find anything in the
CBFS which results RO MCACHE not to be initialized. Add
cbfs_get_boot_device(true) to explicitly initialize MCACHE on recovery
boot.
BUG=b:177091575
BRANCH=none
TEST=build and boot jelboz
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6c4b522fef5a4affd215faa122bdf6b53190cf3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54711
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the default for the corresponding UPD of the Picasso FSP is
DXIO_PSPP_POWERSAVE and the devicetree default is DXIO_PSPP_PERFORMANCE,
add a deviectree setting for each board that's using the Picasso SoC
code to not change the setting for the existing boards.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0008ebb0c0f339ed3bdf24ab95a20aa83d5be2c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This patch also adds the additional 10 MCAX registers to the BERT MSR
error record.
BUG=b:186038401
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I31912d3b3e77e905f64b6143042f5e7f73db7407
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The default of CBFS_MCACHE_SIZE is increased to 0x4000 in CB:54146 but
we have limited space on the PSP thus cannot afford it.
BUG=b:177091575
BRANCH=none
Signed-off-by: Kangheui Won <khwon@chrmoium.org>
Change-Id: I94dd782ae00d0b18ad6dd2fc061e4318bda88579
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
NCP_ERR is a 1 byte register in I/O-space, so use inb and not inw. The
variable the result gets assigned to is also a uint8_t.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9fd8c139004111d6227c0316ba2a8b0281541654
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
commit ce0e2a014009390c4527e064efb59260ef4d3a3b (drivers/intel/fsp2_0:
use FSP to allocate APEI BERT memory region) adds a mechanism to reserve
the BERT region inside the coreboot code, so we can get rid of the
workaround to reserve it in the FSP and return the location in a HOB.
mcfg->bert_size defaults to 0 which makes the FSP not generate the
corresponding HOB, but that field is planned to be removed at least on
Cezanne, so don't explicitly set it to 0.
BUG=b:169934025
TEST=BERT table that gets generated in a follow-up patch for Picasso
points to expected BERT region and Linux is able to access, decode and
display it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaca89b47793bf9982181560f026459a18e7db134
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52584
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since this enum is only used for the devicetree settings and not for the
hardware itself, move it from the southbridge header to the chip one.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0907fc5cba9315fec5fabff67d279c6d95d1c9f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54684
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PSP_SOFTFUSE_BITS used to be like this:
15 0 29 "28 6"
It causes internal shell report error:
/bin/sh: -c: line 0: unexpected EOF while looking for matching `"'
/bin/sh: -c: line 1: syntax error: unexpected end of file
/bin/sh: -c: line 0: unexpected EOF while looking for matching `"'
/bin/sh: -c: line 1: syntax error: unexpected end of file
Change-Id: I716f19d37fb57b9ef3fc7259c6dcca7d21022d32
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Also drop unneeded intermediate cast to void * before casting the
address of the struct dptc_input type variables to uint8_t *.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie1e2aa1ec728a4e16d3a587d7400cdfc8962f443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This will change the names of the GPP bridges, but this ok since there
is no hand written ASL that references these names.
BUG=b:184766519
TEST=Boot picasso and dump ACPI
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic09200156e8a37bd1a29ca95a17c8f8ae2b92bd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54028
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is still causing boot errors on zork:
coreboot-4.13-3659-g269e03d5c42f Fri May 7 22:03:11 UTC 2021 bootblock starting (log level: 8)...
Family_Model: 00820f01
PSP boot mode: Development
Silicon level: Pre-Production
Set power off after power failure.
PMxC0 STATUS: 0x800 BIT11
I2C bus 3 version 0x3132322a
DW I2C bus 3 at 0xfedc5000 (400 KHz)
FMAP: area COREBOOT found @ 875000 (7909376 bytes)
ASSERTION ERROR: file 'src/commonlib/bsd/cbfs_mcache.c', line 106
BUG=b:177323348
TEST=Boot ezkinil to OS
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I68b4b73670e750207414f0d85ff96f21481be8ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53933
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib0f7da12429b6278d1e4bc5d6650c7ee0f3b5209
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
AMDFW tool stores bios dir entry to bios1_entry in picasso but
bios3_entry in cezanne. Separate getting bios_dir_addr into a function
and implement it on each platforms.
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ie18ed7979a04319c074b9b251130d419dc7f22dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52964
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move all platform-specific code except direct svc calls to chipset.c.
There will be differences between each platforms and we can't put
everything into svc.c.
TEST=build firmware for zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ie7a71d1632800072a17c26591e13e09e0269cf75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52963
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We can now delete the picasso specific version.
BUG=b:184766519
TEST=Build zork and verify SSDT has not changed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic79014e83c9ff63cc7a6757b16764ae23b36984f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53935
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The method now dynamically allocates the pirq structure and uses the
get_pci_routing_table method.
BUG=b:184766519
TEST=Build guybrush and verify picasso SSDT has not changed.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I297fc3ca7227fb4794ac70bd046ce2f93da8b869
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This allows us to use the common get_pci_routing_info and
pci_calculate_irq. The IRQ field in the struct was also filled in from
the PPR.
BUG=b:184766519
TEST=Boot ezkinil and verify SSDT table is identical.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I16d90d8c89bfcf48878c0741154290ebc52a4120
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53923
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Mandolin still boots into Linux and there's no ACPI warning in
dmesg.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7e6d38ebeae5e55a4a65930b989838532ab9c446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53920
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also add an alib_ prefix to avoid possible name collisions.
TEST=Timeless build for Mandolin results in identical binary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib0f220a4cde6da764bb8bc589b5f44ae16496bd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53918
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These parameter IDs are defined in the AGESA Interface specification
#55483. This patch also adds a ALIB_DPTC_ prefix to the IDs and makes
the names more consistent.
TEST=Timeless build for Mandolin results in identical binary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I75e0504f6274ad50c53faa8fcbde4d6821d85a04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53917
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The other enum entries are control IDs for the
ALIB_FUNCTION_DYNAMIC_POWER_THERMAL_CONFIG ALIB function while
DPTC_TOTAL_UPDATE_PARAMS is the total number of configuration settings
that will get passed as parameter in the ALIB call, so it shouldn't be
part of that enum.
TEST=Timeless build for Mandolin results in identical binary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0cb9e9d2ba579a74d916011b4ead71cc86d69a24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53916
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ACPI ALIB function numbers are defined in the AMD Generic
Encapsulated Software Architecture (AGESA™) Interface Specification
(document #55483).
TEST=Timeless build stays the same for Mandolin (Picasso) and Gardenia
(Stoneyridge).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I290ef0db32c65ebb2bbbe4f65db4df772b884161
Reviewed-on: https://review.coreboot.org/c/coreboot/+/53915
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We can share this with cezanne.
BUG=b:184766519
TEST=Build picasso
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If746d55345f6b7c828376b64adc5532d20413f68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52916
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This method signature will also be used by cezanne, so move it to
common.
BUG=b:184766519
TEST=Build picasso
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I421bdad51776278f83148174e6f72bdc38249e54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52912
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I409993dcecd38bd2ad603ba467b299a6eab177ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52901
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
agesa_write_acpi_tables has one struct device parameter.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7892cf680661253f74c3e291f5e9fb372e1d4ce3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This function will be reused in Cezanne, so move it from the Picasso
directory to the common FSP integration code.
TEST=On Mandolin Linux finds the AMD SSDT that contains ALIB.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b256de712fe60d1c021cb875aaadec1d331584b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
For CRBs without Google EC with CONFIG_CHROMEOS=y we will get a build
error as google_chromeec_cbi_get_dram_part_num() is not defined. Use
EC_GOOGLE_CHROMEEC instead of CHROMEOS to gate the call.
BUG=b:184124605
Change-Id: I2b200f4fb11513c6fc17a2f0af3e12e5a3e3e5a1
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The usage of external oscillator has got nothing to do with Audio
Co-processor (ACP). Hence move it out of common config and put it into
the SoC config where it is being used.
BUG=None
TEST=Build Dalboz and Vilboz mainboards.
Change-Id: I8c5d98addfba750f9ddb87a846599541b4a8340a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
From cezanne we have enough space in PSP so we don't have to worry about
workbuf size. Hence the function only exists in picasso and deprecated
for later platforms.
So wrap svc_get_max_workbuf_size and provide default weak function so
future platforms don't have to implement dumb function for it.
TEST=build and boot zork, check weak function is not called in zork
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I16e8edf8070aaacb3a6a6a8adc92b44a230c3139
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
These addresses will be changed in cezanne. Before start working on
cezanne, move these out to separate header as a clean-up.
TEST=emerge-zork coreboot
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I2499281d250aae701f86bfcc87c7681e5b684b6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Audio Co-processor driver is similar for both Picasso and Cezanne SoCs.
Hence move it to the common location.
BUG=None.
TEST=Builds Dalboz, Trembyle, Vilboz, Mandolin and Bilby mainboards.
Change-Id: I91470ff68d1c183df9a2927d71b03371b535186a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
hdmi2_disable bit0~3 is used to disable HDMI 2.0 function in DDI0~3
BUG=b:179170193
BRANCH=none
TEST=Build; Verify the UPD was passed to system integrated table
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Change-Id: I383bfd04e01f5202db093105662344869e475746
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: I76270b43b3202bda71ff3f6b97d5ffa2234511b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52646
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, some of the PSP Soft Fuse bits are hardcoded in the Cezanne
and Picasso makefiles.
This makes it impossible for platforms to change them. This change puts
the hardcoded bits in Kconfig, allowing them to be modified by the
platform.
BUG=b:185514903
TEST=Verify that the correct Soft Fuse bits are set.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I190ebf47cb7ae46983733dc6541776bf19a2382f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52422
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MC0_CTL_MASK is no longer available in fam 17h and newer and will result
in a general protection fault when accessed. This register was moved, so
use the one that is correct for this CPU generation.
BUG=b:186038401
TEST=Mandolin no longer crashes in the machine check error handling path
with a general protection fault.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibb042635d917dfcb2121849e2913aa62eca09dd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I264e44132a6a9df6f548c9856c2256d1b92916c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52612
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Trying to limit the number of available cores by setting the MAX_CPUS
Kconfig option to a lower value than the SoC's default might result in
cores being enabled in the FSP-S, but not fully initialized in coreboot
which will cause some malfunction. Add a static assert to make sure
that this option isn't changed from the default. To limit the maximum
number of cores, use the downcore_mode and disable_smt devicetree
settings instead.
TEST=Build fails if MAX_CPUS isn't the expected default.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3cfe09f8bb89a2154d37a37398df982828c824f9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52611
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean up Kconfig and psp_trasfer.h files before copying over to cezanne.
TEST=build, flash and boot on jelboz360
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: Ib370d93e23c15a2fe4c46051ed3647d2d067bb10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52563
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
bl_syscall_public.h is a header file for PSP app, but was used for x86
code to get the definition of PSP_INFO. Move the definition into
psp_transfer.h and do not include bl_syscall_public.h from x86 code.
BUG=none
TEST=build psp_verstage on zork
BRANCH=none
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I0fe011652a47d0ba2939dc31ee3b83f0718a61dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52537
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clarify that the downcoring is about deactivating physical cores.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib8a9d1cedff995c507c3be72e7665953e1659238
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52554
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Even though the UPD field this information is finally written to is an 8
bit value, the smt_disable option is only a boolean.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaac49944993a28ffb98a80201effe1238ec60875
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52553
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the next patch will use a boolean, replace the stddef.h and
stdint.h includes with types.h to have all that we'll need.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0d062c8de29aa3688a911d7887faf592020b33c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52552
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use existing functionality instead of reinventing it.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaeab5cce05ccd860bc8de3775b7d1420653497a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52525
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|