Age | Commit message (Collapse) | Author |
|
Change-Id: Ib7423c8d80355871393c377ebaffdfe2846d8852
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I673f038b4ce3c4141db128a65be71e7a242dfd28
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This will result in less code duplication when the common AMD SoC UART
support gets used for more AMD SoCs.
Change-Id: Id1786f32324de3e3947d792c599e2019705c5a85
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49373
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I80f92bed737904e6ffc858b45459405fe76f1d04
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Separate GPIO define into gpio_defs.h, then we can use it in asl include.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If2a779eae228f621e77610889205853de2fb179a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ia3c4fb41b5851b1c0ffc6bbec7d1c051e232fc94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42978
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I31f2d04d9fc8bdd9e270fb3cb48d71f215999a50
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42894
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace SMBus base addresses with proper symbols.
Change-Id: I5e0ebd7609c5c83d0e443ffba74dae68017d3ebc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42074
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SMBus controller has byte-wide registers. Remove
the word accessors.
Change-Id: If396108308bc8303d84458039b9529ecd83276c9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ic1a5c17c789dd79fea8f348d1a9d32d4301ced88
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42825
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I24454aa9e2ccc98b2aceb6b189e072e6e50b8b30
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I5cec38dac7ea27aa316f5dd4f91ed84627a0f937
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Replace sb prefix with fch prefix, since those are all FCHs and no south
bridges any more. Verstage on PSP uses the I/O access mechanism instead
of the MMIO one, so keep a separate function for that, but also move it
to the common mmio_util file to have them all in one place.
Change-Id: I47dac9ee3d9e27f7b7a5fddab17cf4fc10de6c3e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48435
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the setup of the base address to a separate function and explicitly
set the SMBUS and ASF I/O port decode even though it is expected to
already be set after reset.
Change-Id: I8072ab78985021d19b6528100c674ecdd777e62e
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I005709a8780725339e7c08fbfff94e89c8ef26da
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
ACPIMMIO_DECODE_REGISTER_04 is the definition in the common ACPIMMIO
code block that actually gets used. Also fix the indentation of the
ACPIMMIO register decode defines in the common code.
Change-Id: Ib2c460541be768fe05d8cc3d19a14dbd9c114a45
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
At least a part or the remaining definitions in the soc-specific smi.h
files are also common, but those have to be verified more closely.
Change-Id: I5a3858e793331a8d2ec262371fa22abac044fd4a
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
SMBHST_STAT_NOERROR was a redefinition of SMBHST_STAT_INTERRUPT that was
used in smbus_wait_until_done. Remove the misleading bit definition that
also didn't correspond with the register definitions and replace it with
the definition of the actual bit that gets checked. Also add a comment
that the code actually checks the IRQ status flag to see if the last
command is already completed.
Change-Id: I1a58fe0d58d3887dd2e83320e977a57e271685b3
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: I6df9323dc4e7ca99fd5368f0262e850c0aca5c54
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The patch also rewrites the bit definition using shifts to make them
easier to read.
The older non-SoC chips can probably also use the new header file, but
for this patch the scope is limited to soc/amd, since the older non-SoC
chips don't use the SMBUS controller code in soc/amd/common.
TEST=Timeless build for amd/mandolin and amd/gardenia doesn't change.
Change-Id: Ifd5e7e64a41f1cb20cdc4d6ad1e675d7f2de352b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The code on Stoneyridge didn't set the FCH_AOAC_TARGET_DEVICE_STATE bits
to FCH_AOAC_D0_INITIALIZED like the code for Picasso does, but that is
the default value after reset for those bits on both platforms.
Change-Id: I7cae23257ae54da73b713fe88aca5edfa4656754
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The register locations and bit definitions are the same for Stoneyridge
and Picasso. Since not all devices are present on all SoCs, keep those
numbers in the SoC-specific code.
Change-Id: Ib882927e399031c376738e5a35793b3d7654b9cf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Since coreboot is written in C and not C++, having the double
underscores as a prefix is not an issue, but it also doesn't add much
information, so drop them and the trailing ones as well.
Change-Id: I1028fb9097efab8ffae5ffa9fe85a97feebc78a9
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47583
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SMU mailbox access code from Picasso can be reused in the next
generation, so factor out the code to soc/amd/common/block/smu. Since
the mailbox register offsets in the indirect address space, the number
of arguments and the message IDs don't always match between different
devices, keep those in the soc-specific directories.
Change-Id: Ibaf5b91ab35428e4c771e7163c6e0c4fc50371e7
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
TEST=Timeless build doesn't change for Mandolin and Gardenia.
Change-Id: I1aef68459569536207697bfca407145a7b5334f4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
TEST=Timeless build doesn't change for Mandolin and Gardenia.
Change-Id: I5d3ae1459c333658f4c86388f1822d92ca13c658
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Ib262955a1d26681c796c4b10d2b336f2715824d0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
In order to log gpio events for wake purposes the state
of the gpio subsystem should be snapshotted. Add the ability
to capture state of gpio subystem as well as saving up to 16
gpios that indicate their wake status.
Likewise, provide the eventlog additions based on state.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I49fca56c87543aa8aad0eb7da5c5cb570c4349d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44534
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that all users of the functions manipulating global state
and using soc-specific objects are removed remove those functions.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I18c4c8b0c7852dde8cf0b6b3f11e43e15c3ce155
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to reduce code duplication provide an acpi_fill_gnvs()
helper function. Intent is to move stoneyridge and picasso over
to using this common implementation instead of duplicating it.
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I21c6e2c24eaf42f31ae57c05df7f633d7dc266d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The existing code in common/block/acpi is mixing multiple operations:
saving things to cbmem in common code but then soc code uses that
information, reliant upon soc-specific struct soc_power_reg object,
and only saving/snapshotting ACPI registers very deep in ramstage.
To unwind the above provide some functions that are more targeted:
- Add struct acpi_pm_gpe_state object
- Add acpi_fill_pm_gpe_state()
- Add acpi_pm_gpe_add_events_print_events()
- Add acpi_clear_pm_gpe_status()
BUG=b:159947207
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia7afed2861343802b3c78728784f7cfaf6f53f62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BIT(x) needs <types.h>.
Change-Id: Icaeda969cae52d9c62d976db4ead0e734efa838c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Because there was a lot of discussion about the size increase,
I also looked at the impact of calling the get_spi_bar() function
vs reading spi_base directly and just not worring about whether
or not spi_base was already set.
Using the spi_base variable directly is 77 bytes bytes for all 6
functions. it's roughly double the size to call the function at
153 bytes. This was almost entirely due to setting up a call stack.
If we add an assert into each function to make sure that the spi_base
variable is set, it doubles from the size of the function call to
333 bytes.
For my money, the function call is the best bet, because it not only
protects us from using spi_base before it's set, it also gets the
value for us (at least on x86, on the PSP, it still just dies.)
BUG=b:161366241
TEST: Build
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I0b0d005426ef90f09bf090789acb9d6383f17bd2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Previously, the spi base address code was using a number of different
functions in a way that didn't work for use on the PSP.
This patch consolidates all of that to a single saved value that gets
the LPC SPI base address by default on X86, and allows the PSP to set
it to a different value.
BUG=b:159811539
TEST=Build with following patch to set the SPI speed in psp_verstage.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I50d9de269bcb88fbf510056a6216e22a050cae6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43307
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change fixes the definition of `GPIO_INT_ENABLE_STATUS_DELIVERY`
to use `GPIO_INT_ENABLE_DELIVERY` instead of
`GPIO_INT_ENABLE_STATUS_DELIVERY`.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I64d912200779875cf121cec4476fd39de74c0223
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds a macro `PAD_NC` for configuring no-connect pads. This
configures the pad as input with pull-down.
Change-Id: I47c41c88ccfebe2c5dd9a24f85a120af9c8f56b5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BIT(x) needs <types.h>
Change-Id: I5dc0d45567ae9879a7e12f2ccc48929d2abc9456
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Found using:
diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<'
Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Code has evolved such that there seems to be little
use for global definition of cbmem_top_chipset().
Even for AMD we had three different implementations.
Change-Id: I44805aa49eab526b940e57bd51cd1d9ae0377b4b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43326
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
eSPI interrupts are active level high. The eSPI polarity register
in the chipset inverts incoming signals if the corresonding bit
is 0 in the register. Therefore, all active high (edge or level)
virtual wire interrupts need to ensure they are not inverted.
And really the sender of the interrupts should be conforming to the
the eSPI spec. As such inverting any signals should not be necessary,
but this register in the chipset allows for fixing up those misbehaviors.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7346bb0484506d96d7ab2e6d046ffa0571683a48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
`flags` field of soc_amd_gpio structure is set only for SCI and SMI
configurations. This change adds a new helper macro
PAD_CFG_STRUCT_FLAGS that allows setting of all soc_amd_gpio members
including `flags` field. This can be used directly by PAD_SCI and
PAD_SMI. For all other pad configurations, PAD_CFG_STRUCT macro uses
PAD_CFG_STRUCT_FLAGS with flags set to 0. This allows dropping of
redundant parameter 0 for flags for all other pad configurations.
BUG=b:159944426
Change-Id: I835b62f5502375ffc4215548b51338a67546d699
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42876
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
configuration table
Currently, for Stoneyridge and Picasso mainboards, pads that are
configured for SCI/SMI/WAKE need to have multiple entries in the
configuration table - one for PAD_GPI and other for the special
configuration that is required. This requires a very specific ordering
of pads within the table and is prone to errors because of conflicting
params provided to the different entries for the same pad. This also
does not work very well with the concept of override GPIOs where the
entry in base table is overridden with the first matched entry from
the override table.
This change updates the way GPIO configuration is handled for special
routing like SCI/SMI/WAKE/DEBOUNCE by setting the control field of
soc_amd_gpio structure in the macros performing these
configurations. Also, program_gpios() is updated to perform a write to
GPIO control register instead of read-modify-write. This is because
mainboard is expected to provide only a single configuration entry for
each pad within a given table. Thus, there is no need to preserve
earlier configuration.
Mainboards that were providing multiple entries for a single pad are
updated accordingly.
BUG=b:159944426
Change-Id: I3364dc2982d66c4e33c2b4e6b0b97641ebea27f0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some codepaths want to set selected bits of a hardware register
to match those of a given variable in memory. Provide a helper
function for this purpose and use it in gpio_set(),
gpio_input_pulldown() and gpio_input_pullup().
This change also adds GPIO_PULL_MASK and updates GPIO_OUTPUT_MASK to
include all bits dealing with pull and output respectively.
Change-Id: I4413d113dff550900348a44f71b949b7547a9cfc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds helper macro PAD_CFG_STRUCT for setting the fields
of `soc_amd_gpio`. Additionally, macros are added for different
operations i.e. pull, output, trigger, int_enable, event_trigger,
wake_enable, debounce, etc. All GPIO configuration macros are updated
to use PAD_CFG_STRUCT instead of setting the fields directly.
BUG=b:159944426
Change-Id: I03535d2da0c05f72c4163fa30d72f9c6df44908b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42872
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change updates the macros for GPIO debounce to add _DEB_ in the
name. This is done to make the names consistent with rest of the GPIO
control field names.
BUG=b:159944426
Change-Id: Ic47678108c871c5f1cd0d512783230f18adf3484
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42871
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change renames GPIO macros as follows:
1. Pad filtering macros are renamed to GPIO_TRIGGER_ and
GPIO_ACTIVE_. This determines the filtering applied on the input
signal at the pad.
2. Interrupt enabling macros are renamed to GPIO_INT_ENABLE_.
_INT_ is dropped from pad filtering macros because the filtering
applies to the input signal irrespective of how it is routed. It is
applied at the pad not only for GPIO interrupts but also for other
routes i.e. SCI, SMI, etc.
BUG=b:159944426
Change-Id: Id0ad770be77409aaaae4cc135945e2815ce97030
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42870
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`soc_amd_gpio` structure uses a flag field to store additional
information about GPIO configuration that does not end up directly in
the GPIO control register. However, the naming for these flags is not
consistent across event triggers and special configurations. This
change updates the flag names to be consistent (starting with
GPIO_FLAG_*) and adds some helper functions for GPIO events.
In the following CLs, more changes will be made to drop some of the
special flags which are not really required.
BUG=b:159944426
Change-Id: Idca795c3e594eb956d297d5ba5d08f75b5563ee5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42869
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops unused macro GPIO_TRIGGER_VALID from gpio_banks.h.
BUG=b:159944426
Change-Id: Ie115f37893d9ba190bab56cf8b037febd8b5f4b5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ib2c7cd70ab38d0d8e745b0a611b780d2b0b8dc5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The banks are one after each other in the ACPIMMIO space. Also
there is space for more banks and existing ASL takes advantage
of the property.
Change-Id: Ib78559a60b5c20d53a60e1726ee2aad1f38f78ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42522
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Future implementation of verstage running on PSP will have access
to some of the ACPIMMIO banks, but banks will be mapped runtime
at non-deterministic addresses. Provide preprocessor helpers to
accomplish this.
Change-Id: I8d50de60bb1ea1b3a521ab535a5637c4de8c3559
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Using proper symbols for base addresses, it is possible to
only define the symbols for base addresses implemented for
the specific platform and executing stage.
Change-Id: Ib8599ee93bfb1c2d6d9b4accfca1ebbefe758e09
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This reverts commit 4883252912665f56c8e7801fe03a26594a1e9d5d.
Almost everything in <amdblocks/acpimmio_map.h> is invalid for PSP as
it does not have the same view of memory space.
The prototypes xx_set/get_bar() are only valid for PSP as x86 cores
will use the constant mapping defined in <amdblocks/acpimmio_map.h>
The selected MMIO base address model depends of the architecture the
stage is built for and, to current knowledge, nothing else. So
the guards should have been with ENV_X86 vs ENV_ARM and not about
CONFIG(VERSTAGE_BEFORE_BOOTBLOCK).
For the ENV_ARM stage builds, <arch/io.h> file referenced in the
previously added mmio_util_psp.c file has not been added to the tree.
So there was some out-of-order submitting, which did not get caught
as the build-testing of mixed-arch stages has not been incorporated
into the tree yet.
The previously added file mmio_util_psp.c is also 90% redundant with
mmio_util.c.
Change-Id: I1d632f52745bc6cd3c3dbddb1ea5ff9ba962c2e8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42486
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because the PSP maps the MMIO addresses that are used to non-
deterministic addresses, the accesses need to be able to find
the address at runtime.
BUG=b:158124527
TEST=Build & boot with Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I68305e0f31956c57bfdee42025bdfe938703e82d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42061
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The existing define for SPI_FIFO_DEPTH looked a bit suspicious, but
turned out to be correct.
Change-Id: I91e65d922673f5c451a336ae013cb75f87a3fc98
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42076
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
<types.h> is supposed to provide <commonlib/bsd/cb_err.h>,
<stdbool.h>,<stdint.h> and <stddef.h>. So remove those includes
each time when <types.h> is included.
Change-Id: I886f02255099f3005852a2e6095b21ca86a940ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This function adds support for gpio_configure_pads_with_override
which:
1. Takes as input two GPIO tables -- base config table and override
config table
2. Configures each pad in base config by first checking if there is a
config available for the pad in override config table. If yes, then
uses the one from override config table. Else, uses the base config to
configure the pad.
BUG=b:153456574
TEST=Build and boot dalboz
BRANCH=none
Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I07bfe82827d1f7aea9fcc96574d6deab9e91d503
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2153423
Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41576
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function espi_setup() which allows SoCs to
configure connection to slave. Most of the configuration is dependent
upon mainboard settings in espi_config done as part of the device
tree. The general flow for setup involves the following steps:
1. Set initial configuration (lowest operating frequency and single mode).
2. Perform in-band reset and set initial configuration since the
settings would be lost by the reset.
3. Read slave capabilities.
4. Set slave configuration based on mainboard settings.
5. Perform eSPI host controller configuration to match the slave
configuration and set polarities for VW interrupts.
6. Perform VW channel setup and deassert PLTRST#.
7. Perform peripheral channel setup.
8. Perform OOB channel setup.
9. Perform flash channel setup.
10. Enable subtractive decoding if requested by mainboard.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I872ec09cd92e9bb53f22e38d2773f3491355279e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41272
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CB:41194 got rid of "this file is part of" lines. However, there are
some changes that landed right around the same time including those
lines. This change uses the following command to drop the lines from
new files:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ic3c1d717416f6b7e946f84748e2b260552c06a1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41342
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function lpc_early_init() which does the
following things:
1. Enables LPC controller
2. Disables any LPC decodes (These can be set up later by SoC or
mainboard as required).
3. Sets SPI base so that MMIO base for SPI and eSPI controllers is
initialized.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I016f29339466c3fee92fe9b62a13d72297c29b8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change provides a helper function espi_update_static_bar() that
informs the eSPI common driver about the static BAR to use for eSPI
controller instead of reading the SPIBASE. This is required to support
the case of verstage running on PSP.
BUG=b:153675913
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I1f11bb2e29ea0acd71ba6984e42573cfe914e5d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change adds the following helper functions for eSPI decode:
1. espi_open_io_window() - Open generic IO window decoded by eSPI
2. espi_open_mmio_window() - Open generic MMIO window decoded by eSPI
3. espi_configure_decodes() - Configures standard and generic I/O
windows using the espi configuration provided by mainboard in device tree.
BUG=b:153675913,b:154445472
Change-Id: Idb49ef0477280eb46ecad65131d4cd7357618941
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41073
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds eSPI register definitions for I/O and MMIO decode
using eSPI on AMD SoCs. Additionally, it also adds a macro to define
the offset of ESPI MMIO base from SPI MMIO base.
BUG=b:153675913
Change-Id: Ifb70ae0c63cc823334a1d851faf4dda6d1c1fc1a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change adds support for following SPI configuration functions to
common block SPI driver and exposes them to be used by SoC:
1. fch_spi_early_init(): Sets up SPI ROM base, enables SPI ROM,
enables prefetching, disables 4dw burst mode and sets SPI speed and mode.
2. fch_spi_config_modes(): This allows SoC to configure SPI speed and
mode. It uses SPI settings from soc_amd_common_config to configure the
speed and mode.
These functions expect SoC to include soc_amd_common_config in SoC
chip config and mainboard to configure these settings in device tree.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ia4f231bab69e8450005dd6abe7a8e014d5eb7261
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41248
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change splits lpc_set_spibase() into two separate functions:
lpc_set_spibase() - Sets MMIO base address for SPI controller and eSPI
controller (if supported by platforms)
lpc_enable_spi_rom() - Enables SPI ROM
This split is done to allow setting of MMIO base independent of ROM
enable bits. On platforms like Picasso, eSPI base is determined by the
same register and hence eSPI can set the BAR without having to touch
the enable bits.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I3f270ba1745b4bb8a403f00cd069a02e21d444be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This change adds support for struct soc_amd_common_config that allows
multiple AMD SoCs to share common configuration. This can then be used
by common/block drivers to get the required configuration from device
tree. It also provides function declaration for
soc_get_common_config() that needs to be provided by SoCs making use
of the common configuration structure.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Idb0d797525414c99894a8e4ede65469381db7794
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41246
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If a Picasso platform wants to use GPIO 67 it must disable ROM sharing.
Otherwise ROM access is incredibly slow.
BUG=b:153502861
TEST=Build trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia9ab3803a2f56f68c1164bd241fc3917a3ffcf2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40951
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This change moves all ACPI table support in coreboot currently living
under arch/x86 into common code to make it architecture
independent. ACPI table generation is not really tied to any
architecture and hence it makes sense to move this to its own
directory.
In order to make it easier to review, this change is being split into
multiple CLs. This is change 3/5 which basically is generated by
running the following command:
$ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g'
BUG=b:155428745
Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This change adds support in common block HDA driver to add a PCI
device for HDA in SSDT and removes the HDA device from DSDT for
Stoneyridge and Picasso.
_INI method is still retained in stoneyridge since I am unsure why it
was added. In order to support the _INI method, HDA driver makes a
callback hda_soc_ssdt_quirks() to allow SoCs to add any quirks
required for the HDA device. This callback is implemented by
Stoneyridge to provide the _INI method which retains the same
functionality for HDA device.
This makes it easier to ensure that we don't accidentally
make the DSDT and SSDT entries inconsistent w.r.t. ACPI name and
scope.
BUG=b:153858769,b:155132752
TEST=Verified that audio still works fine on Trembyle.
Change-Id: I89dc46b92fdcb785bd37e18f0456935c0e57eff5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40785
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib45e93faebc2d24389f8739911419dfec437bd59
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add the command to tell the PSP the system is going to a sleep
state.
BUG=b:153677737
Change-Id: I50da358e1f8438b46dbb1bda593becf6dd4549ea
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/2020367
Reviewed-on: https://chromium-review.googlesource.com/2110764
Reviewed-on: https://chromium-review.googlesource.com/2121159
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Implement the MboxBiosCmdSmmInfo function to inform the PSP of the SoC's
SMM configuration. Once the BootDone command is sent, the PSP only
responds to commands where the buffer is in SMM memory.
Set aside a region for the core-to-PSP command buffer and the
PSP-to-core mailbox. Also add an SMM flag, which the PSP expects to read
as non-zero during an SMI.
Add calls to soc functions for the soc to populate the trigger info and
register info (v2 only).
Add functions to set up the structures needed for the SmmInfo function
in Picasso support. Issue a SW SMI, and add a new handler to call the
new PSP function.
BUG=b:153677737
Change-Id: I10088a53e786db788740e4b388650641339dae75
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Family 17h redefines the PSP command and status, and therefore the
steps required to send commands via the mailbox. Convert the existing
version into a v1 and add a v2. New Kconfig options allow the soc to
choose v1 vs. v2.
The v2 PSP begins responding to the mailbox command when the full
bit range is written. Define the new mailbox as a union of a u32
and a structure.
Additional PSP details may be found in the NDA publication (#55758)
AMD Platform Security Processor BIOS Architecture Design Guide for
AMD Family 17h Processors
Change the existing two soc functions that return pointers to void
pointers.
BUG=b:153677737
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d358fdae07da471640856f57568059e9487f6a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Done with sed and God Lines. Only done for C-like code for now.
Change-Id: I22fffa0eab006be2bad4d3dd776b22ad9830faef
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Declutter psp.h by removing internal details the caller doesn't
need to know.
BUG=b:130660285
TEST: Verify PSP functionality on google/grunt
Change-Id: I2fb0ed1d2697c313fb8475e3f00482899e729130
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/2020366
Tested-by: Eric Peers <epeers@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40015
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The initialization code in common//psp is very specific to Family 15h.
Move this to the stoneyridge directory.
BUG=b:130660285
TEST: Verify PSP functionality on google/grunt
Change-Id: Ice3d06d6437f59a529c26fc2359565c940d39482
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/2020365
Reviewed-by: Eric Peers <epeers@google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40000
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The commands used in Family 15h for loading the SMU FW blobs out of
flash had already been defined differently in Family 17h. To begin
removing Family 15h dependencies from the common/psp, change the
definitions of blob type to no longer match the Family 15h commands.
Consolidate the two functions used for interpreting the command and
applying the command into a single one.
BUG=b:130660285
TEST: Verify PSP functionality on google/grunt
Change-Id: Ic5a4926175d50c01b70ff9b10908c38b3cbe8f35
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/2020364
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Tested-by: Eric Peers <epeers@google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I4c110f60b764c97fab2a29f6f04680196f156da5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Change-Id: I8363816a51c342935668545a8b39acce96ce4b2c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38980
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes all the duplicated code and logic and leverages
the existing ones in libraries themselves. The current side
effect is that protection cannot be fully enabled because the
read, write, and write enable command are not exposed in struct
spi_flash currently. That support can be revised if protection
scheme makes sense for our use-cases once it's better understood.
BUG=b:146928174
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I8faf9cc719ee33dd9f03fb74b579b02bbc6a5e2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37957
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add missing Power Management 2, old and new GPIO functions to modify the
contents of these MMIO blocks.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie4db6a4d12d9122ea5b87147adbf7b632ac2b311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Hide the fundamental BIOSRAM accessors to force use of the
memory space via abstraction functions.
Change-Id: I774b6640cdd9873f52e446c4ca41b7c537a87883
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37862
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add common function to enable PCI MMCONF base address. Use the common
function in stoneyridge bootblock.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I1bb8b22b282584c421a9fffa3322b2a8e406d037
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Move the stoneyridge implementation of get/set AP entry to the common
block.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9c73940ffe5f735dcd844911361355c384f617b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
All AMD CPU families supported in coreboot have BIOSRAM space. Looking at
the source code, every family could have the same API to save and restore
cbmem top or UMA base and size.
Unify BIOSRAM layout and add implementation for cbmem top and UMA storing.
Also replace the existing implementation of cbmem top and UMA with the
BIOSRAM access.
TEST=boot PC Engines apu1 and apu2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I69a03e4f01d7fb2ffc9f8b5af73d7e4e7ec027da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37402
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to BKDGs for families 15h 60-6fh or newer and families 16h the
ACPI MMIO decode enable bit is the second LSB, not the first LSB.
Additionally create another enable function for older families where
the register and bit is different.
It does not seem to impact any current board, but may be crucial for
incoming C bootblock implementations when this bit will need to be set
very early. Most likely this bit is set by AGESA right now.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iaa31abc3dbdf77d8513fa83c7415b9a1b7fd266f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37178
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The overhead of pushing variables to stack exceeded the number
of instructions the actual MMIO operation took and the build of
google/aleena with inlined accessors turned out to be just
slightly (<2 KiB) smaller for the entire romstage or ramstage.
Simple read-modify-write MMIO cycles should optimise better now.
IO cycles with index/data register are borderline, at
first sight assembly looked better by not inlining them.
Change-Id: If2c37c9886a0151183aa6dd80eb068d6c67b3848
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
If one wishes to use the functions guarded here, he
has to have datasheet open anyways. It should be clear
from there which regions are supported and which are not.
TEST=Reproducible build of google/aleena.
Change-Id: I0c1f0c9c9a6711532c5078c08cdf9e6612f3bc9c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Builds that would otherwise be reproducible are sometimes
broken due to added #include combined with __LINE__ used
in assert() statement.
Change-Id: If4a02393799a34bbae4f6e506052774526c1a969
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37266
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The standard PCI register space for D14F0 is accessible at 0xfed80000.
Add functions for use as helpers.
Change-Id: Icbf5bdc449322c3f5e59e6126d709cb2808591d5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The LPC-ISA bridge supports two ranges for SuperIO control registers.
Add a generic function to allow a mainboard to enable the appropriate
range. Provide #define values that are more descriptive than the
register's field names.
Change-Id: Ic5445cfc137604cb1bb3ee3ea4c3a4ebdb9a9cab
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35271
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All solid state devices have vendor id defined by JEDEC specification JEP106,
which originally allocated only 7 bits for it plus parity. When number of
vendors exploded beyond 126, a banking proposition came maintaining
compatibility with older vendors while allowing for 4 extra bits (16 banks)
through the introduction of the concept "Continuation code", denoted by the
byte value of 0x7f.
Examples:
0xfe, 0x60, 0x18, 0x00, 0x00 => vendor 0xfe of bank o
0x7f, 0x7f, 0xfe, 0x60, 0x18 => vendor 0xfe of bank 2
BUG=b:141535133
TEST=Build and boot grunt.
Change-Id: I16c5df70b8ba65017d1a45c79e90a76d1f78550c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Use the new SPI code from common folder, delete spi.c. SPI related macros
must be single defined, in southbridge.h if they are used by files other
than the common SPI code, fch_spi.h if they are only used by the common
SPI code. The only exception is SPI_FIFO_DEPTH which must be in southbridge.h,
because it can change between SOC.
BUG=b:136595978
TEST=Build and boot grunt using new SPI code, with debug enabled. Check
output.
Change-Id: I639973d993316a10daa7564462e689b2c183f536
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Create a new SPI code that overrides flash operations and uses the SPI
controller within the FCH to its fullest.
Reference: Family 15h models 70h-7Fh BKDG revision 3.06 (public)
BUG=b:136595978
TEST=Build and boot grunt using this code, with debug enabled. Check
output.
Change-Id: Id293fb9b2da84c4206c7a1341b64e83fc0b8d71d
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
It is already trivial to set D14F3x44 to 0, but add a function to wipe
both that and the settings in D14F3x48, along with x48's associated
addresses.
Change-Id: Ibec25562b2a1568681aea7caf86f00094c436a50
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Include the file containing the typedefs for uint_*.
Change-Id: If33765b6dc4236c4b38860bfc4f2cef9b226b81d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
Include the file containing the typedefs for uint_*.
Change-Id: I3eae80a677e9d6932dc115523da2c0819a371fa7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35268
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Include the file containing the typedefs for uint_*.
Change-Id: Ib0eea9bfd0c8d9e3eba257b561980accf5b4bab4
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35267
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the prototypes match what drivers/amd/agesa would
rather see, in preparation to use the same code with
open-source AGESA.
Change-Id: I1506ee2f7ecf3cb6ec4cce37a030c05f78ec6d59
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|