summaryrefslogtreecommitdiff
path: root/src/northbridge
AgeCommit message (Collapse)Author
2012-02-02Add Intel i5000 Memory Controller HubSven Schnelle
Change-Id: Ic169f3f61babfcfa2ddcb84fc0267ebcf8c5f3bb Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/491 Tested-by: build bot (Jenkins)
2012-01-31northbridge/intel/i945: CHECK_SLFRCS_ON_RESUME Kconfig optionPeter Stuge
Originally brought up by Sven Schnelle in March 2011 http://patchwork.coreboot.org/patch/2801/ http://www.coreboot.org/pipermail/coreboot/2011-March/064277.html On some mainboards it may be neccessary to reset early during resume from S3 if the SLFRCS register indicates that a memory channel is not guaranteed to be in self-refresh. On other mainboards, such as Lenovo X60 and T60, the check always creates false positives, effectively making it impossible to resume. The SLFRCS register is documented on page 197 of Mobile Intel® 945 Express Chipset Family Datasheet Document Number: 309219-006 which is publically available, and the register indicates if a memory channel is guaranteed to be in self-refresh mode (if bit = 1), or that a memory channel *may or may not be* in self-refresh mode (if bit = 0). The register can thus only be used to positively learn that memory is in self-refresh. It is not known for sure that memory is *not* in self-refresh. The register is reset by the PWROK signal, which *should* go low during S3, and go high again when resuming, so it is unsurprising that SLFRCS has already been cleared when we read the register. Sven's measurements of the CKE signal on a ThinkPad shows that memory remains in self-refresh indefinitely, until coreboot re-initializes the memory controller, even when SLFRCS bits were = 0. Boards which require a warm reset when SLFRCS bits are cleared must now explicitly enable the check in the mainboard Kconfig file. This commit selects the new option in all existing i945 mainboards. A follow-up commit will remove the option for ThinkPads. Change-Id: I02320675efb8fde05c371ef243ba5093a4da6d11 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/590 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-01-26Make Geode GX2 VGA setup work.Nils Jacobs
Add MSR register write for VGA memory setup Add missing license Add bit explanation Change-Id: I1cb36eeccd84f0056c829f50d9864047654ce906 Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/580 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-10i945: fix tsc udelay()Sven Schnelle
The comparision is the wrong way round: as long as tsc is below tsc1, the timeout is not reached Change-Id: I75de74ef750b5a45be0156efaf10d7239a0b1136 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/530 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-07Update geode GX2 tree to match LX.Nils Jacobs
Change-Id: I5b99c531e44ea09990b9da0b97213fb7945f34ee Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/512 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-05Clean up AMD Fam14 SSDTMarc Jones
The old SSDT ACPI code would only include the AGESA or the coreboot SSDT. Now include both. AGESA generates the Pstate SSDT and the second coreboot SSDT is for TOM and TOM2. Now, generate the coreboot SSDT instead of patching it. This fixes some ACPI errors in Linux and Windows bluescreens. The Persimmon acpi_tables.c is where the main changes were made and then replicated in the other Fam14 boards. Please test the other mainbords if you have one. Change-Id: I808c863597e024e3e8aeec0821e8618d96cc96a6 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/516 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-12-31White space and coding style fixes.Nils Jacobs
Change-Id: I14f39b5666fc18e8183723ec78a40a849d337736 Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/511 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-12-14k8: add CONFIG_K8_FORCE_2T_DRAM_TIMING and enable it for asus k8v-xFlorian Zumbiehl
Change-Id: Ia457f92f6fb7e287defb838db07f12d0f1766757 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/481 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-12-02Change AMD vendorcode buildKyösti Mälkki
Apply the normal method of recursively including subdirectories for src/vendorcode. Remove redundant references under mainboard and northbridge. Change-Id: I914a6e262ed2abe83f407df36fe5c1af5eb4bcb0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/468 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh <shekairui@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-23k8 raminit: fix bug, improve clock selection, add clock limit for sock754Florian Zumbiehl
in amdk8 raminit: - fix DDR SPD offset for (CLX - 1) (25 instead of 26) - improve clock/CL selection algorithm - implement load-dependent clock limiting for socket 754 Change-Id: I5eb8a3e02eaca18f3bef9a98de22f23b23650762 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/377 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-11-16fix DDR_MASK in load-dependent clock limiting for socket 939 in k8 raminitFlorian Zumbiehl
Change-Id: Ibdce9712f5019863b1cd61b68da11d7c46c6b6f8 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/376 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2011-11-07Cycle time at CAS Latency (CLX - 2) is at 25 in DDR2 SPD, not at 26Florian Zumbiehl
Change-Id: Ic77854130ad43715daa7c0eb462291db48df9f84 Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/370 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-31Add support for E7505 northbridge.Kyösti Mälkki
Adapted from northbridge/intel/e7501 with only minor changes. This commit provides minimal patch from e7501 and I prefer any cosmetic clean-up to be done after initial merge. Due the incomplete register specifications, it is safer to have e7505 as a separate directory in case I improve it to support wider range of memory configurations. I have no e7501 to test with. Change-Id: Iba3bf9d69ff5e9d9ef3a6ebf8259f048c55d637d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/295 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28Clear improper use of CONFIG_CACHE_AS_RAMKyösti Mälkki
Choice between printk/print_ is related to CAR, but really depends whether we compiled with GCC or ROMCC. Change-Id: I9fe831a215736462e8b3f4b96ffe231133ecf79b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/347 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28copy e7501 component to e7505Stefan Reinauer
Change-Id: Ie69a6b6a040a8b0e7693083b3a2d13c327a165b3 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/310 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-19I945: replace #if defined() by #ifSven Schnelle
config.h defines also unset config options (as "0") so #ifdef matches both settings, which isn't what we want. Change-Id: I694e1b8a8ec4c20225d7af1a13a2a336f900e643 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/293 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-15AMD CPU and chipset fixes for compilation with gcc 4.6Stefan Reinauer
Change-Id: I05b08765b38d8d6cc9b7cbdaf87c127b33408c81 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/266 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-15use acpi.h include instead of manually adding acpi_slp_type.Stefan Reinauer
Change-Id: I2a3aaf10e453fa6cce8a993356f2a0587178209a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/276 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-14Fix compilation of AMD GX2 northbridge code with gcc 4.6Stefan Reinauer
Change-Id: I71d96b7cd36dd99a3590ec311c11f67f13012e68 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/267 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-14Fix compilation of VIA CN700 northbridge code with gcc 4.6Stefan Reinauer
Change-Id: Ia52d21c5c467ec08bc7b958ee1a8e37e7d3e025b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/265 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-14fix compilation of intel/sch northbridge code with gcc 4.6Stefan Reinauer
Change-Id: I57804dff9e37f0127900ebb7a67118382944eb89 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/264 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-12amdk8: ASL include for K8 temperature sensor support in ACPIChristoph Grenz
Add a ACPI Source Language snippet which if included as shown in the comments in the file, exposes the 4 possible temperature sensors in the CPU as ACPI thermal zones. Change-Id: I94dd773108e348a0fdb9d2f8d6cfe415d5fa0339 Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/222 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-03TINY_BOOTBLOCK problem-fix on amdk8+amd8111 platformsenok71
The hp/dl145_g1 motherboard did not work since commit 1f7d3c5672ec90f8d71907b1a07c8a87fa461047 (svn 6124). That commit added TINY_BOOTBLOCK for amd8111 southbridge. The result was that the boot process stopped very early (no console output whatsoever). The same symptom was reported on other AMDK8 based boards with amd8111 southbridge chips. This commit seems to fix the bug. It adds a bootblock.c under src/northbridge/amd/amdk8 that calls enumerate_ht_chains. Probably the problem was that enum_ht_chains needs to be called before the southbridge bootblock.c function, not after. Change-Id: I74fb892aa39048e2d0e76c081b713f825d67f2d4 Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Reviewed-on: http://review.coreboot.org/235 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-24Add AMD Family 10h PH-E0 supportQingPei Wang
the patch file comes from src/vendorcode/amd/agesa/f12/Proc/CPU/Family/0x10/RevE /F10MicrocodePatch010000bf.c Change-Id: If701c8a908edf1c486665d3ce4df65da0f65c802 Signed-off-by: QingPei Wang <wangqingpei@gmail.com> Reviewed-on: http://review.coreboot.org/202 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-14AMD F14 Northbridge updatesefdesign98
This change is warning and whitespace fixes in the northbridge code for AMD Family 14 rev C0 cpu update. This does not address warnings in the mainboard, Agesa, Cimx, or southbridge code. Change-Id: I7ee7018a292ebb2343c9b7986dd21227185879dc Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/134 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-09Replace while with do; while to avoid repetitionNoe Rubinstein
Cosmetic only; replaces some 'while' loops with 'do; while' loops to avoid repetition. Replacement performed by the Ruby expression: t.gsub!(/^(\s*)([^\n\{]+)\n\1(while[^\n\{;]+)\n\s*\2/, "\\1do \\2\n\\1\\3;") Change-Id: Ie0a4fa622df881edeaab08f59bb888a903b864fd Signed-off-by: Noe Rubinstein <nrubinstein@proformatique.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/183 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-09Report GSE chipset and warn if the code has been compiled for the wrong chipset.Stefan Reinauer
It would be nicer to unify the code so that it does all detection at runtime instead of compile time (but that would also significantly increase code size) so if someone else wants to give it a shot... Change-Id: Idc67bdf7a6ff2b78dc8fc67a0da5ae7a4c0a3bf0 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/184 Tested-by: build bot (Jenkins)
2011-09-07AMD F14 southbridge updateKerry She
This change adds the southbridge related code to support the update of the AMD Family14 cpus to the rec C0 level. Some of the changes reside in mainboard folders but they reference changed files in the southbridge folder so they are included herein. Change-Id: Ib7786f9f697eaf0bf8abd9140c4dd0c42927ec7e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/135 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-04northbridge/intel/i440bx: Registered SDRAM modules support and fixesKeith Hui
Adds support for initializing registered SDRAM modules on Intel 440BX northbridge. Drops unneeded romcc-inspired programming tricks. Only set nbxecc flags (see 440BX datasheet, page 3-16) when a non-ECC module has been detected in a row via SPD; also drops an unneeded intermediate variable used in setting them. Boot tested on ASUS P2B-LS with regular and registered ECC SDRAM under Linux and memtest86+. Change-Id: Idc99d49567cca55f819d6b0e98952b1c3256498a Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: http://review.coreboot.org/128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-07-18Add AMD Family 10 cpu support to northbridge folderefdesign98
This change adds the AMD Family 10 cpu support to the northbridge folder. The northbridge/amd/agesa Kconfig and Makefile.inc are changed as well. Change-Id: Id76e9fa388c79ac469a673aaedaa4f1bfd7619d9 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/98 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-10ASRock E350M1: ACPI-related BSOD fixScott Duplichan
On installing/starting Windows (tested with Win7 Ultimate) the system crashes with a Blue Screen of Death, reporting an ACPI BIOS error. From Scott Duplichan: To avoid the Windows BSOD, the uninitialized value TOM1 in the SSDT must be corrected. The attached patch does this. It uses the older patching method, and not the (possibly preferred) AML generation method. To simplify the patching operation, I moved the AML item 'TOM1' to the start of the SSDT. The patch also includes code to confirm the AML variable TOM1 is at the expected offset before patching. Also tested & working with Linux. Change-Id: I59cedc366e09d98f690b093d6a21fc0c864559c3 Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/91 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-07-09Fix memory size reporting on AMD family 14h systems for >= 4GBCristian Măgherușan-Stanciu
Applying Scott Duplichan's fix for memory >=4GB Adjusted it to the new directory structure (agesa_wrapper was renamed to just agesa). Boot-tested and confirmed to work, on my board Linux can now access the whole RAM. Change-Id: I31d66a488a7811d214d84653860b3e0116f67d19 Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marshall Buschman <mbuschman@lucidmachines.com> Signed-off-by: Cristian Măgherușan-Stanciu <cristi.magherusan@gmail.com> Reviewed-on: http://review.coreboot.org/48 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-06-30Improve VIA K8M890 HT settings. Use recommended settings for ROMSIP andRudolf Marek
for the transmit clock driving control. Unfortunately this is not enough to make the HT1000 work reliably, therefore blacklist this for now in CPU HT code. If ever anyone figure out what is wrong, it could be removed. The downgrading now makes the board work on HT800, which is certainly better than not at all with a HT1000 CPU. Change-Id: I949bfd9b0b48ee12bd0234c2fb1deaaa773bd235 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/68 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-28Addition of Family12/SB900 wrapper codeefdesign98
This change adds the wrapper code for the AMD Family12 cpus and the AMD Hudson-2 (SB900) southbridge to the cpu, northbridge and southbridge folders respectively. Change-Id: I22b6efe0017d0af03eaa36a1db1615e5f38da06c Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/53 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-22Move existing AMD Ffamily14 code to f14 folderefdesign98
This change moves the AMD Family14 cpu Agesa code to the vendorcode/amd/agesa/f14 folder to complete the transition to the family oriented folder structure. Change-Id: I211e80ee04574cc713f38b4cc1b767dbb2bfaa59 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/52 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-22Rename {CPU|NB|SB}/amd/*_wrapper foldersefdesign98
This change renames the cpu/amd/agesa_wrapper, northbridge/ amd/agesa_wrapper, and southbridge/amd/cimx_wrapper folders to {cpu|NB}/amd/agesa and {SB}/amd/agesa to shorten and simplify the folder names. There is also a fix to vendorcode/amd/agesa/lib/amdlib.c to append "ull" to a trio of 64-bit hexadecimal constants to allow abuild to run successfully. Change-Id: I2455e0afb0361ad2e11da2b869ffacbd552cb715 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/51 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-06-15i945 GMA: restore tft brightness from cmosSven Schnelle
Change-Id: Iaf10f125425a1abcf17ffca1d6e246f955f941cc Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/24 Tested-by: build bot (Jenkins)
2011-06-15i82801gx: replace cafed00d/cafebabe by definesSven Schnelle
We're using '0xcafed00d' all over the code as magic for ACPI S3 resume. Let's add a define for that. Also replace 0xcafebabe by a define. Change-Id: I5f5dc09561679d19f98771c4f81830a50202c69f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/33 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-06-03This patch sets max freq defaults for ddr2 and ddr3for fam10.Marc Jones
Signed-off-by: Marc Jones <marcj303@gmail.com> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6619 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15agesa_wrapper: Avoid repetitive Kconfig depends, trivialPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6595 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Cosmetic cleanup.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6594 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-151) Remove unused kconfig options.Scott Duplichan
2) Correct UMA graphics PCI device ID. Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6593 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Build device paths for AP cores so that coreboot will report them to the OS.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6581 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-15Move mmconf base from e0000000 to f8000000 to avoid conflict with UMA BAR.Scott Duplichan
Signed-off-by: Scott Duplichan <scott@notabs.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6578 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-11Work around unclean CMOS handling for nowPatrick Georgi
Stefan switched away from #ifdef across the tree (and is absolutely right with that), but unfortunately there are some special cases that trigger in even more special situations. Revert one such change selectively. It's destined to go once CMOS is reworked. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6566 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-05-10Change read_option() to a macro that wraps some API uglynessPatrick Georgi
Simplify read_option(CMOS_VSTART_foo, CMOS_VLEN_foo, somedefault) to read_option(foo, somedefault) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6565 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21more ifdef -> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6536 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21some ifdef --> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6535 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-19The "temp" will be used later. So it has to be calculated correctly.Zheng Bao
Comment by Peter, The variable name "temp" unfortunately does not explain what the value is. The commit message also does not have hints. Hopefully in the future it's possible to also use a brief moment to improve the clarity of the code, while it is already being fixed for some other reason. Ie. fixing up variable names, writing particularly informative commit messages, or of course both at the same time! :) Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6517 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-19cleanup wrong use of defined() after exporting all variables in KconfigStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6514 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-14drop incorrectly used CONFIG_ROM_IMAGE_SIZE and unused CONFIG_ARCHStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6496 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-11Unify use of post_codeAlexandru Gagniuc
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6487 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-10i945: improve get_top_of_ram()Sven Schnelle
The current version doesn't honor TSEG, and fails to report the correct top of RAM if IGD is disabled. This is because it uses the BSM (base of stolen RAM) register. In that case, we should use the TOLUD register. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6483 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28Add AMD C32 support.Zheng Bao
It is based on other existing Fam10 code. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6464 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-08Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the ↵Scott Duplichan
expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF. The patch makes these changes: 1) Remove the BUID swap list from ht_wrapper.c and put it in each of 15 romstage.c files where it is used (AMD family 10h projects). 2) Add a prototype to amdfam10.h. 3) Modify the swap list and test in real hardware for mahogany_fam10 and kino family 10h and confirm HT3 operation for the SB link. Abuild tested. Signed-off-by: Scott Duplichan <sc...@notabs.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6439 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Mark non-returning function as noreturn to help some compiler versionsPatrick Georgi
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6418 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6410 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. In fact I changed coreDelay before deleting the code in fidvid that called it. But there're still a couple of calls from src/northbridge/amd/amdmct/wrappers/mcti_d.c Since the comment encouraged fixing something, I parametrized it with the delay time in microseconds and paranoically tried to avoid an overflow at pathological moments. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6408 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. bits 13 - 15 of F3xd4 (StutterScrubEn, CacheFlushImmOnAllHalt and MTC1eEn are reserved for revisions D0 and earlier, so whe should not set them to 0 in fidvid.c config_clk_power_ctrl_reg0(...), called from prep_fid_change. For revisions > D0 (when we support them) it is ok not ot clear them, because they are documented as 0 on reset. bit 12 should be left alone according to BKDG. Should I set 11:8 ClkRampHystSel to 0 in the mask too, just to indicate we're touching them ? We'll OR them to 1111 anyway... Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6407 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Well, I understand it better like this, but maybe it's only me, part of the changes are paranoic, and the only effective change is for a factor depending on mobile or not that I can't test. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6406 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add an untested step in BKDG 2.4.2.8. I don't have the hardware with Core Performance Boost and I think it's only available in revision E that does not even have a constant yet. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6405 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add to init_fidvid_stage2 some step mentioned in BKDG 2.4.2.7 that was missing . Some lines are dead code now, but may handy if one day we support revison E CPUs. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6404 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Add to init_fidvid_stage2 some step for my CPU (rev C3) mentioned in BKDG 2.4.2.6 (5) that was missing Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6403 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Looking at BKDG the process for updating Pstate Nb vid after warn reset seemed more similar to the codethat was there fo pvi than the one for svi, so I called the pvi function passing a pvi/svi flag. I don't find documentation on why should UpdateSinglePlaneNbVid() be called in PVI, but since I can't test it, I leave it as it was. This patch showed some progress beyond fidvid in my boar,d but only sometimes, most times it just didn't work. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6402 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Factor out some common expressions. Add an error message when coreboots hangs waiting for a pstate that never comes (it happened to me), and throw some paranoia at it for good mesure. If I understood BKDG fam10 CPUs never need a software initiated vid transition, because the hardware knows what to do when you just request a Pstate change if the cpu is properly configured. In fact unifying a little what PVI and SVI do was better for my board (SVI). So I drop transitionVid, which I didn't understand either (why did it have a case for PVI if it is never called for PVI ? Why did the PVI case distinguigh cpu or nb when PVI is theoretically single voltage plane ? ). Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Contemplate the possibility of nbCofVidUpdate not being defined, trying to get closer to BKDG Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. BKDG says nbSynPtrAdj may also be 6 sometimes. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6397 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I didn't understand quite why it did that iwth F3xA0 (Power Control Misc Register) so I moved Pll Lock time to rules in defaults.h and reimplemented F3xA0 programming. A later patch will remove a part I don't know what's mean to do. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6396 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-28Improving BKDG implementation of P-states,Xavi Drudis Ferran
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Bring F3xD4 (Clock/Power Control Register 0) more in line with BKDG i more cases. It requires looking at the CPU package type so I add a function for that (in the wrong place?) and some new constants Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6395 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-27Add 300 MHz and 500 MHz HT frequency limitsXavi Drudis Ferran
Needed to build successfully with Expert mode enabled. Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6386 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-24Add compile-time defaults to some K8 CMOS options in case they're absent in CMOSJosef Kellermann
This affects the CMOS options iommu, ECC_memory, max_mem_clock, hw_scrubber, interleave_chip_selects. If they're absent in cmos.layout, a Kconfig value is used if it exists, or a hardcoded default otherwise. [Patrick: I changed the ramstage CMOS handling a bit, and dropped the reliance of hw_scrubber on ECC RAM, as it has nothing to do with it - it's the cache that's being scrubbed here.] Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-21[i945] Add SPD adress mappingSven Schnelle
The current code works only with dual channel if Channel 0 uses SPD address 0x50/0x51, while the second channel has to use 0x52/0x53. For hardware that uses other addresses (like the ThinkPad X60) this means we get only one module running instead of both. This patch adds a second parameter to sdram_initialize, which is an array with 2 * DIMM_SOCKETS members. It should contain the SPD addresses for every single DIMM socket. If NULL is given as the second parameter, the code uses the old addressing scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6374 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14Errata #169 works on HT, not MCJosef Kellermann
Signed-off-by: Josef Kellermann <seppk@arcor.de> Acked-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6355 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-14This code provides cpu northbridge initialization for Family 14h cpus. It is ↵Frank Vibrans
dependent on the AMD Agesa code. Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6345 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-10Implemented workaround for erratum 169, obsoleting erratum 131.Alexandru Gagniuc
Workaround for 131 removed. Changed workaround for erratum 110 to only include pre-revision-F processors. For details, check AMD publications: #25759 (Errata for Fam F pre-revision F processors) #33610 (Errata for Fam F revision F and later processor) Based on work and previous patches by: Rudolf Marek <r.marek@assembler.cz> Josef Kellermann <seppk@arcor.de> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6340 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-27SMM code on i945 platforms needs udelay()Peter Stuge
smm-y wasn't required before, because udelay.c used to be #included from various files in src/mainboard. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6303 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-20For Cx, each ChipSel need to be sent MR command.Zheng Bao
After this patch, tilapia can run in higher memory frequency. To test the high frequency, dont forget to change the freq limit in mcti_d.c: static void mctGet_MaxLoadFreq(struct DCTStatStruc *pDCTstat) { pDCTstat->PresetmaxFreq = 800; } Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6276 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-19Add a GX2 Kconfig option to choose the framebuffer size.Nils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6275 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-17The code is tested on my board with register DIMMs. More tests need to beZheng Bao
done. Please send the testing report. Note: The pDCTstat->PresetmaxFreq in mctGet_MaxLoadFreq() should be set to a higher limit, otherwise the frequnce will be set as 400MHz. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Scott Duplichan <scott@notabs.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6258 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-06Fix some settings fo AMD MCT. It is based on BIOS test suite.Zheng Bao
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6246 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-30Use die() to assure the processor can't wake up from an interrupt.Nils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6224 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29-Change the remaining GLIU1 port 5 register names from VIP (Video Input Port)Nils Jacobs
to FG (FooGlue). As the GX2 has no VIP port. -Change the Memmory setup MSR register names so they correspond better to the databook. (Part1) This is less confusing for beginners. -Add a MSR printing function to northbridge.c like in the Geode LX code. -Remove the AES register names.(GX2 has no AES registers) -Delete some unused code. -Clean up GX2 northbridge code to match Geode LX code. -Add missing copyright header to northbridge.c. -Move hardcoded IRQ defining from northbridge.c to irq_tables.c . Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6221 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29fix i810 boards with ram init debugging disabled.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6220 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27proper printk handling in src/northbridge/intel/i82810/raminit.cStefan Reinauer
and drop some romcc relics in 440bx code too Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27__PRE_RAM__ is defined by the makefileStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6217 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27dump_spd_registers() is only defined when ram init debugging is on.Stefan Reinauer
Most boards unconditionally call this. Fix it in header file instead of each single romstage.c Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6216 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27Fix most CONFIG_DEBUG_RAM_SETUP issues. Stefan Reinauer
The intel/xe7501devkit is still broken, I think the (romcc) image is too big to fit in the bootblock if CONFIG_DEBUG_RAM_SETUP is enabled. It would make sense to convert all CPU_INTEL_SOCKET_MPGA604 to CAR, but I have no hardware to test. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6215 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26Move Geode GX2 UMA video memory size to KconfigNils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6211 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26Remove dead and unused Geode GX2 codeNils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6210 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26Replace Geode GX2 MSR addresses for GLCP on GLIU1 with namesNils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6209 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-26Clean up Geode GX2 comments, whitespace and coding style. Trivial.Nils Jacobs
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6208 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-23Fix build with CONFIG_DEBUG_RAM_SETUP on Intel 440BX, use printk().Keith Hui
It's a good thing to use printk() instead of print_*() anyway on 440BX (and other chipsets which have been converted to CAR). Build tested and boot-tested on ASUS P2B-LS. Signed-off-by: Keith Hui <buurin@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6206 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-19The same mechanisms are used for normal and fallback images. Stefan Reinauer
Hence drop the FALLBACK_ prefix Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18Fix a few whitespace and coding style issues.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18A couple of Poulsbo fixes:Patrick Georgi
- Don't include cmc.bin to the build. It's required, but we don't ship it - mptable's API changes a bit. Adapt. - Fix ACPI for new iasl versions with improved code validation Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18Support Intel SCH (Poulsbo) and add iwave/iWRainbowG6 boardPatrick Georgi
which uses it. Compiles, but not boot tested lately. Many things missing (eg. SMM support, proper ACPI, ...) Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6198 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-17drop one more version of doing serial uart output differently.Stefan Reinauer
coreboot made it kind of complicated to print a character on serial. Not quite as complicated as UEFI, but too much for a good design. Fix it. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6191 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16fix according to coding guidelinesStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 20:51:01 +0000