summaryrefslogtreecommitdiff
path: root/src/northbridge/intel
AgeCommit message (Collapse)Author
2012-08-01Intel Sandybridge: add reserved memory as resourcesKyösti Mälkki
Reserved memory resources will get removed from memory table at the end of write_coreboot_table(), Change-Id: I02711b4be4f25054bd3361295d8d4dc996b2eb3e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1372 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-30sandybridge: reinitialize usbdebug after MRCSven Schnelle
MRC messes with USB devices, so we have to reinitialize USB debug after MRC has finished. Change-Id: I45c0a687cebd69d0a31235bb870f8c455f42d4f2 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1377 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-07-27Intel and GFXUMA: fix MTRR and use uma_resource()Kyösti Mälkki
Commit 2d42b340034ff005693482ef9ca34ce3e0f08371 changed the variable MTRR setup and removed compensation of uma_memory_size in the cacheable memory resources. Since the cacheable region size was no longer divisible by a large power of 2, like 256 MB, this caused excessive use of MTRRs. As first symptoms, slow boot with grub and poor user response. As a solution, register the actual top of low ram with ram_resource(), and do not subtract the UMA/TSEG regions from it. TSEG may require further work as the original did not appear exactly right to begin with. To have UMA as un-cacheable, use uma_resource(). Change-Id: I4ca99b5c2ca4e474296590b3d0c6ef5d09550d80 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1239 Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Tested-by: build bot (Jenkins)
2012-07-27Intel 82810 and 82830: always room for PCI memoryKyösti Mälkki
No need for the test, tomk is at most 1GB on these chipsets. Even if there was no room, adjusting the memory resource would not not divert accesses in the hardware from DRAM to PCI. Change-Id: I2213b8d9d2e6ab8da8fd3e8081cc62bb05b6b316 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1369 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-27Intel i945 and sch: no memory over 4GBKyösti Mälkki
No need for the test, tomk is top of low memory and always below 4GB. Change-Id: Ifc8f29268b761aa9b07b578673236a673f0c70b5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1368 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-26Refactor driver structsPatrick Georgi
Our driver infrastructure became more flexible recently. Make use of it. These are the low hanging fruits (files with 5 device variants or more), but there are still lots of files with less potential for deduplication. Change-Id: If6b7be5046581f81485a511b150f99b029b95c3b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1358 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-07-26CTDP: Only do TDP down/nominal change from TNP0Duncan Laurie
Otherwise there is a flurry of TDP changes with suspend/resume as the kernel powers devices off on suspend and brings them back online in resume. This also adds a mutex around the TDP operations since it is split across two methods and can't just rely on being Serialized. Change-Id: I7757d3ddad34ac985a9c8ce2fc202e2b2dcb2527 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1348 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-26ACPI: Add support for runtime config TDP downDuncan Laurie
The required power MSRs are mirrored in MCHBAR so it is possible to configure TDP at runtime via ASL. This adds the required fields and a set of methods to configure "TDP down" and "TDP nominal". It explicitly does not support "TDP up" at the moment. PSSS: method is added to assist in searching the _PSS table for the appropriate entry that corresponds to the desired max non-turbo ratio. STND: Set TDP Down from Nominal. This will limit CPU to the TDP down configuration by sequencing the required changes in the right order. STDN: Set TDP Nominal from Down. This will set the CPU back to nominal configuration by sequencing the required changes in the correct (reverse) order. This does not introduce any functional changes and must be paired with additional changes to be useful. The current configured TDP can be checked to see that the transition to/from a desired level is successful. > mmio_read8 0xfed15f50 0x00 # TDP-Nominal > mmio_read8 0xfed15f50 0x01 # TDP-Down Change-Id: I31a2f30cc9d134cc5eee980ae9288ae45e71c6e6 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1344 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25ELOG: Add support for a monotonic boot counter in CMOSDuncan Laurie
This maintains a 32bit monotonically increasing boot counter that is stored in CMOS and logged on every non-S3 boot when the event log is initialized. In CMOS the count is prefixed with a 16bit signature and appended with a 16bit checksum. This counter is incremented in sandybridge early_init which is called by romstage. It is incremented early in order notice when reboots happen after memory init. The counter is then logged when ELOG is initialized and will store the boot count as part of a 'System boot; event. Reboot a few times and look for 'System boot' events in the event log and check that they are increasing. Also verify that the counter does NOT increase when resuming from S3. 171 | 2012-06-23 16:02:55 | System boot | 285 176 | 2012-06-23 16:26:00 | System boot | 286 182 | 2012-06-23 16:27:04 | System boot | 287 189 | 2012-06-23 16:31:10 | System boot | 288 Change-Id: I23faeafcf155edfd10aa6882598b3883575f8a33 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1315 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-25More descriptive error messages in Sandybridge raminit codeStefan Reinauer
MRC returns specific error codes; print the according error message if we know what it means. Change-Id: Iaaf1512b9d577d4291fccfb94d879043ab5b11b5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1289 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24ELOG: Fix boot count increment for non-wake caseDuncan Laurie
The count was only incrementing for a wake from S5 and it was not incrementing in the normal reboot case. Change-Id: I73bc6db6bd02e6c4677f7e44a5c098c6dcb51747 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/1328 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Ivybridge: fix workaround and enable PAIRDuncan Laurie
MCHBAR 0x5f10[7:0] should be set to 0x30 for ivybridge and 0x20 for sandybridge. Move this code to ramstage and set it per-chipset. Power Aware Interrupt Routing is supported in ivybridge, enable it and set fixed priority. Boot on ivybridge device and read MCHBAR 0x5f10: mmio_read8 0xfed15f10 0x30 And verify PAIR is enabled (bit4=1): mmio_read8 0xfed15418 0x24 Change-Id: If017d5ce2bd5ab5092c86f657434f2b645ee6613 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1303 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24CPU: Add basic support for Nominal Configurable TDPDuncan Laurie
Ivybridge B0+ CPUs are capable of supporting multiple TDP levels. This complicates the default case because now the registers that were reporting max non-turbo ratio are reporting that value for the highest possible TDP level. For now this change just forces everything to use the Nominal TDP values instead of the higher (or lower) levels. - When building P-state tables, determine the P[1] (max non turbo) ratio based on the Nominal ratio if available. - Set the turbo activation ratio to the Nominal max ratio. - Mirror the power level settings in new MCHBAR register after they are written, which happens after BIOS_RESET_CPL is set. - Set the current ratio to Nominal ratio at boot. 1) Verify that P-state table is generated properly with P[0]=1801MHz (ratio 0x1C) and P[1]=1800MHz (ratio 0x12) PSS: 1801MHz power 17000 control 0x1c00 status 0x1c00 PSS: 1800MHz power 17000 control 0x1200 status 0x1200 2) Verify power limits in MCHBAR match PKG_POWER_LIMIT: > rdmsr 0 0x610 0x800080aa00dc8088 > mmio_read32 0xfed159a4 0x000080aa > mmio_read32 0xfed159a0 0x00dc8088 3) Verify turbo activation ratio is set to nominal ratio: > rdmsr 0 0x64c 0x0000000000000012 4) Check that proper ratio was set at boot on one core only: > grep 'frequency set to' /sys/firmware/log model_x06ax: frequency set to 1800 model_x06ax: frequency set to 1800 model_x06ax: frequency set to 1800 model_x06ax: frequency set to 1800 Change-Id: I592e60a7740f31b140986a8269dca91b4adbb270 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1304 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Rename cache_lbmem() to cache_ramstage()Stefan Reinauer
... and don't require it to specify a cache type. This function is only used on romcc boards, and should go away (because all boards should be switched to CAR) Change-Id: Ic32ca3be1afffc773c72c140e88b338d48a0c8ca Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1288 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24Make ACPI code detect Sandy/Ivy Bridge dynamicallyStefan Reinauer
On systems with socketed CPUs we want to be able to drop in a Sandy Bridge or Ivy Bridge CPU without recompiling the firmware. Hence, detect the north bridge dynamically. In order for this to work, we need Ivy Bridge MRC and coreboot configured for Ivy Bridge. Change-Id: I635bef2c61d47d36a3fdd87f8ecb6e69097ba969 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1281 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Drop (empty) sandybridge_late_initialization()Stefan Reinauer
The function is empty (a left-over from i945) and should be removed. Change-Id: I91e573b5e37cb9133ea1037aef7e6daf3c292864 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1290 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Add support for HM70 and NM70 LPC bridgeStefan Reinauer
This lets the SPI driver and the LPC driver know about HM70 and NM70. Change-Id: Id2f1e0e5586a2f7200b2d24785df3f2be890da98 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1300 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Print PCI ID of PCH during boot upStefan Reinauer
Right now, if we have an unknown PCH, coreboot will print something like this: PCH type: Unknown rev id 4 Instead, it should also print the PCI ID of the device, so we can add it to the list of known PCHes. Change-Id: Ib0b96e287c36d2895d1287b1734ca13d75e7985a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1287 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-24Drop leading spaces from CPU name stringStefan Reinauer
This is as per Intel's suggestion on how to display their name strings. Change-Id: Ie82341305e58baa8041e50a61a11b395fa7d9582 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1298 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-07-24Fix MRC cache update delaysStefan Reinauer
When no valid MRC cache area is found, the mrc_cache data structure was used without prior initialization. This sometimes caused a long delay when booting because compute_ip_checksum would checksum up to 4GB of memory. Change-Id: I6a0ca1aa618838bbc3d042be425700fc34b427f2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1277 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-24SandyBridge: Add another PCI device ID for northbridgeWalter Murphy
Change-Id: I153579561f7eed6d4befd74ff39e1a5e778d0e46 Signed-off-by: Walter Murphy <wmurphy@google.com> Reviewed-on: http://review.coreboot.org/1269 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-07-24Fixes to enable RC6 on IvyBridgeDuncan Laurie
- The unneeded poll on non-MT force-wake bit was timing out and causing the gma_pm_init_pre_vbios() function to exit early so it was not preparing PM registers properly. I changed the gtt_poll() calls to not return on timeout unless it can't proceed so we don't see half-initialized registers. - RC6+ (Deep Render Standby) is not working reliably so we can just enable RC6 in the BIOS and let the kernel decide if it wants to enable RC6+ later. This Kernel message is new in kernel 3.4: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off Change-Id: I69d005ba56be8c7684a4ea1133a1d761f7c07acc Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1268 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-22i945: Disable IGD if plugin VGA is preferredPatrick Georgi
It's shut down, but UMA memory is not reclaimed. A later extension could optionally do the magic register dance that allows initialization of IGD as secondary graphics device. Change-Id: I2a92bb71755005b886a8e1825325c678a9991bf2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1252 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-20Fix udelay() implementation for i945 romstageNico Huber
Work around 32-bit overflow with 64-bit multiplication. Calculate correct CPU frequency. Change-Id: I86d78f2d70b9f9c62fd4e1e0d765e92e4de83f67 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/1254 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-20Intel SCH northbridge: fix resource indexKyösti Mälkki
Change-Id: If131ac9df89080faccd8ed952d6fc019483b5b2e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1237 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16i5000: Fix resource allocationSven Schnelle
The current code didn't reserve static resource the right way. Also reduce TOLM to 0xd0000000, because those boards have so many PCI devices that 0xe0000000 isn't sufficient. Change-Id: Ia75a81905eea1a096aed464b63ac154e044bc99c Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1220 Tested-by: build bot (Jenkins)
2012-07-09i5000: reset system if raminit failsSven Schnelle
Don't stop if RAM init fails at first try. It's better to restart and try again instead of failing on the first try if the second try would have worked. Change-Id: Ib5660265d5b10a01588f2e4022dac2ee34f2c6d0 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1191 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-07-06i5000: Add PCI ids for all i5000 flavoursSven Schnelle
Change-Id: I48be647e3f38038830200bcc64429cbf86990ad7 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1174 Tested-by: build bot (Jenkins)
2012-07-06i945: Reset IGD on bootPatrick Georgi
This is mostly necessary for reboot, but it doesn't hurt the boot process. On reboot explicitely reset the integrated graphics, otherwise the VGABIOS might not be able to reinitialize it properly, and you either have a still of the last pre-reboot image, garbage or an empty screen, but no text-mode. Change-Id: Ic3d6932fbaf720d88daaac7e4b09c3c0b9f0b0e2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1178 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-06-20i5000: fix another typoSven Schnelle
As Mathias Krause pointed out, using movw/outw on %al is clearly invalid. Let's do another typo fix... Change-Id: Ib95832a11097f599a236ab30c64c26ef429a1699 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1119 Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-06-20i5000: fix typosSven Schnelle
Peter and Ron pointed out two typos. They have no side effects, but it's still worth to fix them. Change-Id: I9aecccdbc72beb2623fbe558a06e4f1b050f6e74 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1117 Tested-by: build bot (Jenkins)
2012-06-18i5000: enforce hard resetSven Schnelle
Not doing a hard reset leaves the BOFL0 register cleared, which prevents the BSP selection from working. To make sure we start with known values, use the SPAD0 register for soft reset detection. If there's a value other than 0, do a hard reset. Change-Id: I390e3208084cfd32d73cce439ddf2bc9d4436a62 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1103 Tested-by: build bot (Jenkins)
2012-05-29Sandybridge: Remove remnants of FDT support from MRC cache codeStefan Reinauer
Originally, ChromeBooks would get the offset of the MRC cache from an entry in the u-boot device tree. Not everyone wants to use u-boot on Sandybridge systems, however. Since the new code (based on Kconfig) is now fully working, we can drop the u-boot device tree remnants. Change-Id: I4e012ea981f16dce9a4d155254facd29874b28ef Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1051 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-29Sandybridge: Fix MRC cache calculationStefan Reinauer
The MRC region is described by Kconfig variables, no further math or parsing is required at this point. Change-Id: I290d8788b69ef007e9ea2317ce55aefa2d791883 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1046 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-11Hook up MRC cache updateStefan Reinauer
Requirements: - must be in ramstage (locking flash while executing code from there might not work) - must be after cbmem is reinitialized (so the mrc cache copy of the current run can be found) Change-Id: I8028fb073349ce2b027ef5f8397dc1a1b8b31c02 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1002 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-11Rework Sandybridge MRC cache handlingStefan Reinauer
- Separate Sandybridge from ChromeOS a bit The Sandybridge code depends on chromeos features a whole lot. As a first step, provide a code path to look up the MRC cache without depending on u-boot. - Move mrc cache handling to separate file This enables us to handle the MRC cache from ramstage, where we can write the flash safely (eg. to update the cache). Also teach it to lookup the current MRC cache from CBMEM, as the original data block isn't available anymore. After all the preparations, finally write to the SPI as necessary. It's a simple round robin wear levelling that erases the entire MRC cache region when it's full and starts from the beginning. Change-Id: I4751385574cf709b03d5c9d153b7481ffc90ce12 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1001 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-05-03Add missing newline to printk in Sandybridge init codeStefan Reinauer
Change-Id: I9217a75ec1a0abb898c45752d990231ce98e5fb2 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/991 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-02Make Intel i5000 specific options only appear on i5000 systemsStefan Reinauer
Change-Id: If183611b0b62d9321a5a12311c4cb3b344b04b36 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/986 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-02Strip quotes from Sandybridge MRC blobStefan Reinauer
This fixes my build when specifying an absolute path to the binary. Change-Id: I95fb3960be70f78146c6afeb9cc777dccdca6b5b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/987 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-02Sandybridge: Display platform information earlyVadim Bendebury
It is important to have the system configuration reported as early as possible to have a better idea what exact chipset the platform is running with. This change adds code to have an early coreboot module report the CPU and PCH information. CPU info includes the 32 bit feature information word, the symbolic processor brand string, and information about some features support, as obtained through CPUID instructions. The PCH information includes the symbolic device name and PCI device version. Change-Id: If6c21ad5ffb76d7d57d89f4f87d04bdd7192480a Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/975 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-01Update Ivybridge GT power meter tablesDuncan Laurie
- New table for GT1 - Updates to GT2 17W table - New table for GT2 35W SKU - New table for GT2 Other This also includes a workaround to poll on a different register when deasserting force wake. On some SKUs the kernel is hanging when bringing up graphics unless this register is also polled. Change-Id: I2badf62b464e901cfb0eaf4fc196f59111c71564 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/974 Tested-by: build bot (Jenkins)
2012-05-01Update ivybridge graphics initializationDuncan Laurie
- Add config options to set backlight registers - Update powermeter weight tables for IvyBridge GT1 and add a new table for GT2 SKU - Fix a few registers used during GPU PM init sequence Change-Id: I1500bc07e3ba1bc10c77e7856089e716489dc07a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/973 Tested-by: build bot (Jenkins)
2012-05-01Only send ME Dram Init Done message on SandybridgeDuncan Laurie
This is done inside the SystemAgent binary on Ivybridge. Change-Id: I8fb0f593a65a4803e160b284c21b9d5021e2e4a0 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/970 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-01Modify DMI init for IvyBridgeVincent Palatin
The ASPM setting for the Direct Media Interface should no longer be done on Ivybridge/PantherPoint based systems. Change-Id: Id30de1beb1b162564048e76712736ccf7049dc7c Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: http://review.coreboot.org/969 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-01Fix Sandybridge/Ivybridge mainboards according to code reviewStefan Reinauer
This fixes a few cosmetics with the following three boards: - Intel Emerald Lake 2 - Samsung ChromeBook - Samsung ChromeBox The following issues were fixed: - rely on include path in ASL code instead of specifying relative paths - use updated ALIGN_CURRENT in acpi_tables.c - use preprocessor defines instead of hard coded values where possible Change-Id: Ia5941be3873aa84c30c13ff2f0428d1c52daa563 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/963 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2012-04-30Sandybridge: Temporarily disable MRC cache finding codeStefan Reinauer
This code is still using libfdt which was denied for inclusion in coreboot, so it won't compile as is. Without MRC cache, waking from suspend won't work, and cold boots are significantly slower (adds around 300-400ms per channel IIRC). A rework of this code is currently in the works, but will take a little bit more time (and should not hold back the mainboards being merged) Change-Id: Ifb9e7d7b86c1f52378803a748810da0d51b58384 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/948 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-28Reverse Vendor ID & Device ID for map_oprom_vendev()Martin Roth
- When calling map_oprom_vendev() the vendor ID and device ID are joined into a 32 bit value. They were reversed from the order that I would have expected - Device ID as the high 16 bits and the Vendor ID as the low 16. This patch reverses them so so that the the dword comparison in map_oprom_vendev() matches what's entered into Kconfig for vendor,device. - Change files calling map_oprom_vendev() Change-Id: I5b84db3cb1a359a7533409fde7d05fbc6ba3fcc4 Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/938 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-27SMM: Add udelay on Sandybridge systemsStefan Reinauer
Cougar Point southbridge does udelay in SMM, hence add it on Sandybridge systems. Change-Id: I6e5520ca27e7c6eaae632992fb68612067bc1e30 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/937 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-21Intel e7505: build as separate object fileKyösti Mälkki
No longer include northbridge files directly in the source for mainboard romstage.c and fix includes. Also make required adjustments to function declarations. Change-Id: Iafdcc0766ed44c64cc628e5935eef2c6372f5f22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/906 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-21Intel e7505: enable ECC scrubbingKyösti Mälkki
It takes about 3 seconds to scrub 8GiB DDR266 RAM. After ECC scrub XIP cache is disabled for system stability. There is very little to do in romstage after ECC scrub, especially when RAM debug messages are turned off. So the delay caused by this is hardly noticeable. Cache for complete ROM is re-enabled before ramstage is decompressed, and it has no unstability issues. So the code required to re-enable cache for ROM currently already exists in cache-as-ram_ht.inc. A Kconfig option HW_SCRUBBER enables the scrub to be run on hard reboots and power-ons. Change-Id: Icf27acf73240c06b58091f1229efc0f01cca3f85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/905 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-19Intel e7505: refactor onlyKyösti Mälkki
Drop comments (from e7501 era) which no longer seem to apply with e7505. Write the semi-constant D0:F0 table as code. Some register settings seem to be in different order compared with vendor BIOS, and will be handled by follow-up patches. Split RCOMP register copy function in two parts. Drop some uses of inline and local_mdelay(). Change-Id: I8739d3b2bbad5861118e8b16ccea1dd86991204f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/896 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-17Intel e7505: handlers for undocumented registersKyösti Mälkki
Makes the code a bit more readable, IMO. There is no clean way to implement this as the affected registers are undocumented. Seems ROMCC cannot handle the enum. Also any of my future changes would not be even abuild tested as there is no longer a board with ROMCC and this chipset. E7505 chipset is CAR only from now on. Change-Id: I0e2d8ba0c7ed7cce46d9eafb8d8badf04cf75f7a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/895 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-12Unify IO APIC address specificationPatrick Georgi
Some places still hardcoded the address instead of using IO_APIC_ADDR. Change-Id: I3941c1ff62972ce56a5bc466eab7134f901773d3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/677 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-11Intel e7505: cleanupsKyösti Mälkki
Fix delay loop comments. Time waited and the comments did not match in the origin (e7501), so delays currently "just work". Move reset detection to main raminit and don't use generic sdram_initialize for now, as there are local debug functions I need to use. Fix AOpen respectively. Disable ecc scrub, until I have it fixed for cache-as-ram use. Change-Id: I0529297f43c565d30b5fb7d1836700278ac029c4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/883 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-11Intel e7505: renames onlyKyösti Mälkki
Drop maybe-prefix in registers and tables. Have a name in place of PCI_DEV(x,y,z) to avoid confusion. Change-Id: I88f51b50d7fd83294aa14455a83418630e1bab85 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/882 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-05Add support for Intel Sandybridge CPU (northbridge part)Stefan Reinauer
Change-Id: I06228ecf9cac931ad34e32871d5a4f2a4857b2ac Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/854 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-16Intel northbridge I945: Apply un-written naming rulesKyösti Mälkki
Use NORTHBRIDGE_INTEL_I945 to select the driver directory for build. Use _SUBTYPE_945GC and _SUBTYPE_945GM to define at compile-time which model of I945 the driver is built for. Change-Id: I11b1e0998d0fc28f8946bad4f0989036a9b18af4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/684 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-07Move C labels to start-of-linePatrick Georgi
Also mark the corresponding lint test stable. Change-Id: Ib7c9ed88c5254bf56e68c01cdbd5ab91cd7bfc2f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/772 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Avoid ../../.. paths in ASL filesPatrick Georgi
The current directory is always part of the search path of cpp when using #include "..." Change-Id: I74fe39e0c79835e4b9a927afcbeab21040d8ae52 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/648 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Rename i945 ACPI files to not carry an i945_ prefixPatrick Georgi
In the spirit of the earlier renames. Change-Id: I458a42c79a164483120169d1822ffa6861cc3aff Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/647 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-10Remove non-existent includeSven Schnelle
Change-Id: I702d59371b4a57ce22623cbab6e936b653d57edf Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/619 Tested-by: build bot (Jenkins)
2012-02-10i5000: halt second BSPSven Schnelle
If both FSBs on i5000 are equipped with CPU packages, one CPU from each package is elected as BSP. To prevent races between both BSPs, hlt the second BSP. Change-Id: I6bfcb17d34e9f028280acff1694309e37307ec21 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/615 Tested-by: build bot (Jenkins)
2012-02-02Add Intel i5000 Memory Controller HubSven Schnelle
Change-Id: Ic169f3f61babfcfa2ddcb84fc0267ebcf8c5f3bb Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/491 Tested-by: build bot (Jenkins)
2012-01-31northbridge/intel/i945: CHECK_SLFRCS_ON_RESUME Kconfig optionPeter Stuge
Originally brought up by Sven Schnelle in March 2011 http://patchwork.coreboot.org/patch/2801/ http://www.coreboot.org/pipermail/coreboot/2011-March/064277.html On some mainboards it may be neccessary to reset early during resume from S3 if the SLFRCS register indicates that a memory channel is not guaranteed to be in self-refresh. On other mainboards, such as Lenovo X60 and T60, the check always creates false positives, effectively making it impossible to resume. The SLFRCS register is documented on page 197 of Mobile Intel® 945 Express Chipset Family Datasheet Document Number: 309219-006 which is publically available, and the register indicates if a memory channel is guaranteed to be in self-refresh mode (if bit = 1), or that a memory channel *may or may not be* in self-refresh mode (if bit = 0). The register can thus only be used to positively learn that memory is in self-refresh. It is not known for sure that memory is *not* in self-refresh. The register is reset by the PWROK signal, which *should* go low during S3, and go high again when resuming, so it is unsurprising that SLFRCS has already been cleared when we read the register. Sven's measurements of the CKE signal on a ThinkPad shows that memory remains in self-refresh indefinitely, until coreboot re-initializes the memory controller, even when SLFRCS bits were = 0. Boards which require a warm reset when SLFRCS bits are cleared must now explicitly enable the check in the mainboard Kconfig file. This commit selects the new option in all existing i945 mainboards. A follow-up commit will remove the option for ThinkPads. Change-Id: I02320675efb8fde05c371ef243ba5093a4da6d11 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/590 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-01-10i945: fix tsc udelay()Sven Schnelle
The comparision is the wrong way round: as long as tsc is below tsc1, the timeout is not reached Change-Id: I75de74ef750b5a45be0156efaf10d7239a0b1136 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/530 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-31Add support for E7505 northbridge.Kyösti Mälkki
Adapted from northbridge/intel/e7501 with only minor changes. This commit provides minimal patch from e7501 and I prefer any cosmetic clean-up to be done after initial merge. Due the incomplete register specifications, it is safer to have e7505 as a separate directory in case I improve it to support wider range of memory configurations. I have no e7501 to test with. Change-Id: Iba3bf9d69ff5e9d9ef3a6ebf8259f048c55d637d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/295 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28Clear improper use of CONFIG_CACHE_AS_RAMKyösti Mälkki
Choice between printk/print_ is related to CAR, but really depends whether we compiled with GCC or ROMCC. Change-Id: I9fe831a215736462e8b3f4b96ffe231133ecf79b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/347 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28copy e7501 component to e7505Stefan Reinauer
Change-Id: Ie69a6b6a040a8b0e7693083b3a2d13c327a165b3 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/310 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-19I945: replace #if defined() by #ifSven Schnelle
config.h defines also unset config options (as "0") so #ifdef matches both settings, which isn't what we want. Change-Id: I694e1b8a8ec4c20225d7af1a13a2a336f900e643 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/293 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-15use acpi.h include instead of manually adding acpi_slp_type.Stefan Reinauer
Change-Id: I2a3aaf10e453fa6cce8a993356f2a0587178209a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/276 Tested-by: build bot (Jenkins) Reviewed-by: Uwe Hermann <uwe@hermann-uwe.de>
2011-10-14fix compilation of intel/sch northbridge code with gcc 4.6Stefan Reinauer
Change-Id: I57804dff9e37f0127900ebb7a67118382944eb89 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/264 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-09Replace while with do; while to avoid repetitionNoe Rubinstein
Cosmetic only; replaces some 'while' loops with 'do; while' loops to avoid repetition. Replacement performed by the Ruby expression: t.gsub!(/^(\s*)([^\n\{]+)\n\1(while[^\n\{;]+)\n\s*\2/, "\\1do \\2\n\\1\\3;") Change-Id: Ie0a4fa622df881edeaab08f59bb888a903b864fd Signed-off-by: Noe Rubinstein <nrubinstein@proformatique.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/183 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-09Report GSE chipset and warn if the code has been compiled for the wrong chipset.Stefan Reinauer
It would be nicer to unify the code so that it does all detection at runtime instead of compile time (but that would also significantly increase code size) so if someone else wants to give it a shot... Change-Id: Idc67bdf7a6ff2b78dc8fc67a0da5ae7a4c0a3bf0 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/184 Tested-by: build bot (Jenkins)
2011-08-04northbridge/intel/i440bx: Registered SDRAM modules support and fixesKeith Hui
Adds support for initializing registered SDRAM modules on Intel 440BX northbridge. Drops unneeded romcc-inspired programming tricks. Only set nbxecc flags (see 440BX datasheet, page 3-16) when a non-ECC module has been detected in a row via SPD; also drops an unneeded intermediate variable used in setting them. Boot tested on ASUS P2B-LS with regular and registered ECC SDRAM under Linux and memtest86+. Change-Id: Idc99d49567cca55f819d6b0e98952b1c3256498a Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: http://review.coreboot.org/128 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-06-15i945 GMA: restore tft brightness from cmosSven Schnelle
Change-Id: Iaf10f125425a1abcf17ffca1d6e246f955f941cc Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/24 Tested-by: build bot (Jenkins)
2011-06-15i82801gx: replace cafed00d/cafebabe by definesSven Schnelle
We're using '0xcafed00d' all over the code as magic for ACPI S3 resume. Let's add a define for that. Also replace 0xcafebabe by a define. Change-Id: I5f5dc09561679d19f98771c4f81830a50202c69f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/33 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-05-10Change read_option() to a macro that wraps some API uglynessPatrick Georgi
Simplify read_option(CMOS_VSTART_foo, CMOS_VLEN_foo, somedefault) to read_option(foo, somedefault) Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6565 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-21some ifdef --> if fixesStefan Reinauer
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6535 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-10i945: improve get_top_of_ram()Sven Schnelle
The current version doesn't honor TSEG, and fails to report the correct top of RAM if IGD is disabled. This is because it uses the BSM (base of stolen RAM) register. In that case, we should use the TOLUD register. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6483 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-21[i945] Add SPD adress mappingSven Schnelle
The current code works only with dual channel if Channel 0 uses SPD address 0x50/0x51, while the second channel has to use 0x52/0x53. For hardware that uses other addresses (like the ThinkPad X60) this means we get only one module running instead of both. This patch adds a second parameter to sdram_initialize, which is an array with 2 * DIMM_SOCKETS members. It should contain the SPD addresses for every single DIMM socket. If NULL is given as the second parameter, the code uses the old addressing scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6374 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-27SMM code on i945 platforms needs udelay()Peter Stuge
smm-y wasn't required before, because udelay.c used to be #included from various files in src/mainboard. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Patrick Georgi <patrick.georgi@secunet.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6303 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-29fix i810 boards with ram init debugging disabled.Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6220 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27proper printk handling in src/northbridge/intel/i82810/raminit.cStefan Reinauer
and drop some romcc relics in 440bx code too Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27dump_spd_registers() is only defined when ram init debugging is on.Stefan Reinauer
Most boards unconditionally call this. Fix it in header file instead of each single romstage.c Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6216 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27Fix most CONFIG_DEBUG_RAM_SETUP issues. Stefan Reinauer
The intel/xe7501devkit is still broken, I think the (romcc) image is too big to fit in the bootblock if CONFIG_DEBUG_RAM_SETUP is enabled. It would make sense to convert all CPU_INTEL_SOCKET_MPGA604 to CAR, but I have no hardware to test. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6215 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-23Fix build with CONFIG_DEBUG_RAM_SETUP on Intel 440BX, use printk().Keith Hui
It's a good thing to use printk() instead of print_*() anyway on 440BX (and other chipsets which have been converted to CAR). Build tested and boot-tested on ASUS P2B-LS. Signed-off-by: Keith Hui <buurin@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6206 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-19The same mechanisms are used for normal and fallback images. Stefan Reinauer
Hence drop the FALLBACK_ prefix Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6204 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18Fix a few whitespace and coding style issues.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6200 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18A couple of Poulsbo fixes:Patrick Georgi
- Don't include cmc.bin to the build. It's required, but we don't ship it - mptable's API changes a bit. Adapt. - Fix ACPI for new iasl versions with improved code validation Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6199 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-18Support Intel SCH (Poulsbo) and add iwave/iWRainbowG6 boardPatrick Georgi
which uses it. Compiles, but not boot tested lately. Many things missing (eg. SMM support, proper ACPI, ...) Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6198 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-16fix according to coding guidelinesStefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6185 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13Following patch adds support for suspend/resume functions. I had to change ↵Rudolf Marek
the get_cbmem_toc because macro magic did not work well. The writes to NVRAM are not used in asrock board (k8 pre rev f) but they should work when used with am2 boards. In fact maybe the suspend will work on mahogany or others ;) - with some simple patch which follows for asrock. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6173 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-13We hardcode highmemory size in every northbridge! This is bad, and ↵Rudolf Marek
especially if suspend to ram is involved. Let the default be taken from cbmem.h which also handles the suspend logic. Abuild tested. Please check all changes if I did not make any wrong while converting this to bytes. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6171 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-11catch some illegal configurations (trivial)Stefan Reinauer
Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6163 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-08second round name simplification. drop the <component>_ prefix.stepan
the prefix was introduced in the early v2 tree many years ago because our old build system "newconfig" could not handle two files with the same name in different paths like /path/to/usb.c and /another/path/to/usb.c correctly. Only one of the files would end up being compiled into the final image. Since Kconfig (actually since shortly before we switched to Kconfig) we don't suffer from that problem anymore. So we could drop the sb700_ prefix from all those filenames (or, the <componentname>_ prefix in general) - makes it easier to fork off a new chipset - makes it easier to diff against other chipsets - storing redundant information in filenames seems wrong Signed-off-by: <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-07Get rid of some unneeded function prototypes in romstage.c files.Uwe Hermann
Abuild-tested. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6147 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-27After finding the missing bit poweroff works now.Tobias Diedrich
I cleaned up the patch and moved most of the dsdt.dsl and acpi_tables.c into the southbrige/northbridge directory. Updated patch should fix abuild error and incorporates suggestions on irc by uwe (thanks for the comments). Thanks to Idwer Vollering <vidwer@gmail.com> for the original patch. Tested: Linux (poweroff, powerbutton event) XP (poweroff, powerbutton event) Abuild-tested Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6127 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 03:34:29 +0000