summaryrefslogtreecommitdiff
path: root/src/mainboard
AgeCommit message (Expand)Author
2015-04-17urara: Define UART used for serial consoleDavid Hendricks
2015-04-17storm: Add STM flash supportVadim Bendebury
2015-04-17ryu: Add support for EVT board with ID BASE3(1,1)Furquan Shaikh
2015-04-17storm: handle dual purpose recovery buttonVadim Bendebury
2015-04-17ryu: add support for p4 boardsDavid Riley
2015-04-17ipq806x: extend GSBI driver to support i2c on any GSBI blockSourabh Banerjee
2015-04-17ipq806x: add LPASS clock control driverVadim Bendebury
2015-04-17ipq806x: Add support for mmu in bootblock.Deepa Dinamani
2015-04-17veyron_{brain,danger,rialto}: Enable eventloggingDavid Hendricks
2015-04-17veyron_{brain,danger,rialto}: Use common watchdog rebootDavid Hendricks
2015-04-17rk3288: move reboot_from_watchdog() before rk808 settinghuang lin
2015-04-17purin: add purin under mainboardDaisuke Nojiri
2015-04-17chromeos: Provide common watchdog reboot supportJulius Werner
2015-04-17veyron_*: Enable eventloggingDavid Hendricks
2015-04-17uart: pass register width in the coreboot tableVadim Bendebury
2015-04-17blaze: add new Hynix 2GB BCTNeil Chen
2015-04-17rk3288: detect sdram size at runtimehuang lin
2015-04-17veyron: move setup_chromeos_gpios() prototype to board.hJulius Werner
2015-04-17urara: add board id information for urara boardIonela Voinescu
2015-04-17rk3288: Add a config variable hack to skip display initDavid Hendricks
2015-04-17veyron: Activate Winbond SPI driverJulius Werner
2015-04-15rk3288: support edp HPD functionhuang lin
2015-04-15rk3288: meet the backlight power timing requesthuang lin
2015-04-15veyron_rialto: Change recovery GPIO to PUSH_KEY.Hung-Te Lin
2015-04-15veyron_rialto: Fix boot failure in romstage.Hung-Te Lin
2015-04-15google/veyron_*: Remove unused sdram-ddr-hynix-2GB.inchuang lin
2015-04-15Jerry: add SAMSUNG K4B4G1646Q-HYK0 ddr3 sdram supportPaul Ma
2015-04-15veyron: support H5TC4G63CFR sdram in jerryhuang lin
2015-04-15veyron: Add veyron_rialto boardjinkun.hong
2015-04-15ipq806x: load and start RPMVadim Bendebury
2015-04-15storm: Add watchdog reset api.Deepa Dinamani
2015-04-15ipq806x: Load TZBSP blob from coreboot ramstageVikas Das
2015-04-15storm: adjust rombase startup to vboot2Vadim Bendebury
2015-04-15ipq8064: add DRAM initialization codeVadim Bendebury
2015-04-15ipq806x: add i2c driverVadim Bendebury
2015-04-15google/storm: prepare enabling vboot2Vadim Bendebury
2015-04-15storm: add code for detecting rec/dev/write protect switches' statusDaisuke Nojiri
2015-04-15veyron: Add "backlight" GPIO to coreboot tableJulius Werner
2015-04-15brain: remove sdmmc_power_off() in romstageDavid Hendricks
2015-04-15veyron_danger: Enable EDP display initDavid Hendricks
2015-04-15Danger: Apply differences between Brain and DangerDavid Hendricks
2015-04-15Danger: Initial mainboard importDavid Hendricks
2015-04-15veyron_*: Move PMIC_BUS to a Kconfig variableDavid Hendricks
2015-04-15veyron: add H9CCNNN8GTMLAR sdram in speedyJiazi Yang
2015-04-15veyron: Support Speedy v1 hardwarehuang lin
2015-04-15Brain: Apply differences between Jerry and BrainDavid Hendricks
2015-04-15Brain: Initial mainboard importDavid Hendricks
2015-04-15blaze: add new Micron 2GB BCTNeil Chen
2015-04-15veyron: Fix TPM I2C initialization and sync boardsJulius Werner
2015-04-15veyron_*: Use common CBFS wrapperDavid Hendricks
2015-04-15veyron: Support Mighty v1 hardwarehuang lin
2015-04-15veyron: Support Jerry v3 hardwarehuang lin
2015-04-15veyron: Support Pinky v4 hardwarehuang lin
2015-04-15veyron: Move backlight gpio control to mainboard.chuang lin
2015-04-15veyron: Trigger hard reset (via GPIO) if last reboot was caused by watchdogJulius Werner
2015-04-15veyron_speedy: Support Samsung-4GB and Lynix-4GB LPDDRhuang lin
2015-04-15veyron: Add veyron_speedy boardhuang lin
2015-04-15veyron: Turn off SD card power in romstageJulius Werner
2015-04-14storm: do not enable the ethernet switch by defaultVadim Bendebury
2015-04-14samus: Declare TPM in devicetree.cb and include ACPI deviceDuncan Laurie
2015-04-14wtm2/samus: fix coreboot compilation error with tpmp removedHarry Pan
2015-04-14urara: increase drive strength for SPIM1 MFIOsIonela Voinescu
2015-04-14urara: setup I2C0 clock and MFIOsIonela Voinescu
2015-04-14urara: Reduce MIPS PLL jitterIonela Voinescu
2015-04-14urara: add clock setup for MIPS CPU, ROM and EthernetIonela Voinescu
2015-04-14urara: remove call to printk before UART is initializedIonela Voinescu
2015-04-14urara: Configure clocks and MFIOsIonela Voinescu
2015-04-14rush: Configure display related clock, pad, and powerJimmy Zhang
2015-04-14rush: devicetree: Define default dp panel parametersJimmy Zhang
2015-04-14timer: Reestablish init_timer(), consolidate timer initialization callsJulius Werner
2015-04-14CBFS: Automate ROM image layout and remove hardcoded offsetsJulius Werner
2015-04-14CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstoolJulius Werner
2015-04-13storm: Fix timer init order problemJulius Werner
2015-04-13storm: add hard_reset templateDaisuke Nojiri
2015-04-13rk3288: Move UART initialization to bootblock_mainboard_early_init()Julius Werner
2015-04-13arm: Add bootblock_mainboard_early_init() for pre-console initializationJulius Werner
2015-04-13rush: Add and select DO_SOR_INIT config optionJimmy Zhang
2015-04-13ryu: Add and select DO_DSI_INIT config optionJimmy Zhang
2015-04-13ryu: display: Move display api to mainboardJimmy Zhang
2015-04-13ryu: display: Split dc functions from dsi display codeJimmy Zhang
2015-04-13ryu: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
2015-04-13rush: audio: Setup I2S1/DAP2 and EXTPERIPH1/MCLK muxes correctlyTom Warren
2015-04-13rush: Add gpio config for PWR button and LID open switchJimmy Zhang
2015-04-13nyan/rush/veyron: Align ChromeOS GPIOs to new modelJulius Werner
2015-04-13urara: add support for DMA coherent memory areaIonela Voinescu
2015-04-11hp/pavilion_m6_1035dx/cmos.layout: Remove unused optionsAlexandru Gagniuc
2015-04-10Add google/veyron_mighty boardKatie Roberts-Hoffman
2015-04-10rockchip: support displayhuang lin
2015-04-10veyron*: select VIRTUAL_DEV_SWITCHDavid Hendricks
2015-04-10veyron: Adapt to new board revisionsJulius Werner
2015-04-10veyron_jerry: Port CPU overshoot preventionJulius Werner
2015-04-10veyron*: sdram_get_ram_code() -> ram_code()David Hendricks
2015-04-10veyron*: use gpio_base2_value() in board_id()David Hendricks
2015-04-10veyron: Change VCC10_LCD_PWREN_H to allowed maximum of 2.5VJulius Werner
2015-04-10veyron_jerry: Remove board ID based assumptionsJulius Werner
2015-04-10veyron: Change eMMC enable pin to be pulled (not driven) highDoug Anderson
2015-04-10Add google/veyron_jerry boardKatie Roberts-Hoffman
2015-04-10storm: copy WiFi calibration data in the CBMEMVadim Bendebury
2015-04-10tegra132: Make non-vboot2 memlayout more usefulFurquan Shaikh
2015-04-10google/rush_ryu: Add speaker amp config for AD4567 on P0/P1Tom Warren